| /********************************************************************** |
| * Author: Cavium, Inc. |
| * |
| * Contact: support@cavium.com |
| * Please include "LiquidIO" in the subject. |
| * |
| * Copyright (c) 2003-2016 Cavium, Inc. |
| * |
| * This file is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License, Version 2, as |
| * published by the Free Software Foundation. |
| * |
| * This file is distributed in the hope that it will be useful, but |
| * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty |
| * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or |
| * NONINFRINGEMENT. See the GNU General Public License for more details. |
| ***********************************************************************/ |
| #include <linux/pci.h> |
| #include <linux/netdevice.h> |
| #include "liquidio_common.h" |
| #include "octeon_droq.h" |
| #include "octeon_iq.h" |
| #include "response_manager.h" |
| #include "octeon_device.h" |
| #include "octeon_main.h" |
| #include "cn66xx_regs.h" |
| #include "cn66xx_device.h" |
| #include "cn68xx_regs.h" |
| |
| static void lio_cn68xx_set_dpi_regs(struct octeon_device *oct) |
| { |
| u32 i; |
| u32 fifo_sizes[6] = { 3, 3, 1, 1, 1, 8 }; |
| |
| lio_pci_writeq(oct, CN6XXX_DPI_DMA_CTL_MASK, CN6XXX_DPI_DMA_CONTROL); |
| dev_dbg(&oct->pci_dev->dev, "DPI_DMA_CONTROL: 0x%016llx\n", |
| lio_pci_readq(oct, CN6XXX_DPI_DMA_CONTROL)); |
| |
| for (i = 0; i < 6; i++) { |
| /* Prevent service of instruction queue for all DMA engines |
| * Engine 5 will remain 0. Engines 0 - 4 will be setup by |
| * core. |
| */ |
| lio_pci_writeq(oct, 0, CN6XXX_DPI_DMA_ENG_ENB(i)); |
| lio_pci_writeq(oct, fifo_sizes[i], CN6XXX_DPI_DMA_ENG_BUF(i)); |
| dev_dbg(&oct->pci_dev->dev, "DPI_ENG_BUF%d: 0x%016llx\n", i, |
| lio_pci_readq(oct, CN6XXX_DPI_DMA_ENG_BUF(i))); |
| } |
| |
| /* DPI_SLI_PRT_CFG has MPS and MRRS settings that will be set |
| * separately. |
| */ |
| |
| lio_pci_writeq(oct, 1, CN6XXX_DPI_CTL); |
| dev_dbg(&oct->pci_dev->dev, "DPI_CTL: 0x%016llx\n", |
| lio_pci_readq(oct, CN6XXX_DPI_CTL)); |
| } |
| |
| static int lio_cn68xx_soft_reset(struct octeon_device *oct) |
| { |
| lio_cn6xxx_soft_reset(oct); |
| lio_cn68xx_set_dpi_regs(oct); |
| |
| return 0; |
| } |
| |
| static void lio_cn68xx_setup_pkt_ctl_regs(struct octeon_device *oct) |
| { |
| struct octeon_cn6xxx *cn68xx = (struct octeon_cn6xxx *)oct->chip; |
| u64 pktctl, tx_pipe, max_oqs; |
| |
| pktctl = octeon_read_csr64(oct, CN6XXX_SLI_PKT_CTL); |
| |
| /* 68XX specific */ |
| max_oqs = CFG_GET_OQ_MAX_Q(CHIP_CONF(oct, cn6xxx)); |
| tx_pipe = octeon_read_csr64(oct, CN68XX_SLI_TX_PIPE); |
| tx_pipe &= 0xffffffffff00ffffULL; /* clear out NUMP field */ |
| tx_pipe |= max_oqs << 16; /* put max_oqs in NUMP field */ |
| octeon_write_csr64(oct, CN68XX_SLI_TX_PIPE, tx_pipe); |
| |
| if (CFG_GET_IS_SLI_BP_ON(cn68xx->conf)) |
| pktctl |= 0xF; |
| else |
| /* Disable per-port backpressure. */ |
| pktctl &= ~0xF; |
| octeon_write_csr64(oct, CN6XXX_SLI_PKT_CTL, pktctl); |
| } |
| |
| static int lio_cn68xx_setup_device_regs(struct octeon_device *oct) |
| { |
| lio_cn6xxx_setup_pcie_mps(oct, PCIE_MPS_DEFAULT); |
| lio_cn6xxx_setup_pcie_mrrs(oct, PCIE_MRRS_256B); |
| lio_cn6xxx_enable_error_reporting(oct); |
| |
| lio_cn6xxx_setup_global_input_regs(oct); |
| lio_cn68xx_setup_pkt_ctl_regs(oct); |
| lio_cn6xxx_setup_global_output_regs(oct); |
| |
| /* Default error timeout value should be 0x200000 to avoid host hang |
| * when reads invalid register |
| */ |
| octeon_write_csr64(oct, CN6XXX_SLI_WINDOW_CTL, 0x200000ULL); |
| |
| return 0; |
| } |
| |
| static inline void lio_cn68xx_vendor_message_fix(struct octeon_device *oct) |
| { |
| u32 val = 0; |
| |
| /* Set M_VEND1_DRP and M_VEND0_DRP bits */ |
| pci_read_config_dword(oct->pci_dev, CN6XXX_PCIE_FLTMSK, &val); |
| val |= 0x3; |
| pci_write_config_dword(oct->pci_dev, CN6XXX_PCIE_FLTMSK, val); |
| } |
| |
| static int lio_is_210nv(struct octeon_device *oct) |
| { |
| u64 mio_qlm4_cfg = lio_pci_readq(oct, CN6XXX_MIO_QLM4_CFG); |
| |
| return ((mio_qlm4_cfg & CN6XXX_MIO_QLM_CFG_MASK) == 0); |
| } |
| |
| int lio_setup_cn68xx_octeon_device(struct octeon_device *oct) |
| { |
| struct octeon_cn6xxx *cn68xx = (struct octeon_cn6xxx *)oct->chip; |
| u16 card_type = LIO_410NV; |
| |
| if (octeon_map_pci_barx(oct, 0, 0)) |
| return 1; |
| |
| if (octeon_map_pci_barx(oct, 1, MAX_BAR1_IOREMAP_SIZE)) { |
| dev_err(&oct->pci_dev->dev, "%s CN68XX BAR1 map failed\n", |
| __func__); |
| octeon_unmap_pci_barx(oct, 0); |
| return 1; |
| } |
| |
| spin_lock_init(&cn68xx->lock_for_droq_int_enb_reg); |
| |
| oct->fn_list.setup_iq_regs = lio_cn6xxx_setup_iq_regs; |
| oct->fn_list.setup_oq_regs = lio_cn6xxx_setup_oq_regs; |
| |
| oct->fn_list.process_interrupt_regs = lio_cn6xxx_process_interrupt_regs; |
| oct->fn_list.soft_reset = lio_cn68xx_soft_reset; |
| oct->fn_list.setup_device_regs = lio_cn68xx_setup_device_regs; |
| oct->fn_list.update_iq_read_idx = lio_cn6xxx_update_read_index; |
| |
| oct->fn_list.bar1_idx_setup = lio_cn6xxx_bar1_idx_setup; |
| oct->fn_list.bar1_idx_write = lio_cn6xxx_bar1_idx_write; |
| oct->fn_list.bar1_idx_read = lio_cn6xxx_bar1_idx_read; |
| |
| oct->fn_list.enable_interrupt = lio_cn6xxx_enable_interrupt; |
| oct->fn_list.disable_interrupt = lio_cn6xxx_disable_interrupt; |
| |
| oct->fn_list.enable_io_queues = lio_cn6xxx_enable_io_queues; |
| oct->fn_list.disable_io_queues = lio_cn6xxx_disable_io_queues; |
| |
| lio_cn6xxx_setup_reg_address(oct, oct->chip, &oct->reg_list); |
| |
| /* Determine variant of card */ |
| if (lio_is_210nv(oct)) |
| card_type = LIO_210NV; |
| |
| cn68xx->conf = (struct octeon_config *) |
| oct_get_config_info(oct, card_type); |
| if (!cn68xx->conf) { |
| dev_err(&oct->pci_dev->dev, "%s No Config found for CN68XX %s\n", |
| __func__, |
| (card_type == LIO_410NV) ? LIO_410NV_NAME : |
| LIO_210NV_NAME); |
| octeon_unmap_pci_barx(oct, 0); |
| octeon_unmap_pci_barx(oct, 1); |
| return 1; |
| } |
| |
| oct->coproc_clock_rate = 1000000ULL * lio_cn6xxx_coprocessor_clock(oct); |
| |
| lio_cn68xx_vendor_message_fix(oct); |
| |
| return 0; |
| } |