| /* |
| * Copyright (c) 2015, The Linux Foundation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * GPIO and pin control functions on this SOC are handled by the "TLMM" |
| * device. The driver which controls this device is pinctrl-msm.c. Each |
| * SOC with a TLMM is expected to create a client driver that registers |
| * with pinctrl-msm.c. This means that all TLMM drivers are pin control |
| * drivers. |
| * |
| * This pin control driver is intended to be used only an ACPI-enabled |
| * system. As such, UEFI will handle all pin control configuration, so |
| * this driver does not provide pin control functions. It is effectively |
| * a GPIO-only driver. The alternative is to duplicate the GPIO code of |
| * pinctrl-msm.c into another driver. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/pinctrl/pinctrl.h> |
| #include <linux/acpi.h> |
| |
| #include "pinctrl-msm.h" |
| |
| static struct msm_pinctrl_soc_data qdf2xxx_pinctrl; |
| |
| /* A reasonable limit to the number of GPIOS */ |
| #define MAX_GPIOS 256 |
| |
| /* maximum size of each gpio name (enough room for "gpioXXX" + null) */ |
| #define NAME_SIZE 8 |
| |
| static int qdf2xxx_pinctrl_probe(struct platform_device *pdev) |
| { |
| struct pinctrl_pin_desc *pins; |
| struct msm_pingroup *groups; |
| char (*names)[NAME_SIZE]; |
| unsigned int i; |
| u32 num_gpios; |
| int ret; |
| |
| /* Query the number of GPIOs from ACPI */ |
| ret = device_property_read_u32(&pdev->dev, "num-gpios", &num_gpios); |
| if (ret < 0) { |
| dev_warn(&pdev->dev, "missing num-gpios property\n"); |
| return ret; |
| } |
| |
| if (!num_gpios || num_gpios > MAX_GPIOS) { |
| dev_warn(&pdev->dev, "invalid num-gpios property\n"); |
| return -ENODEV; |
| } |
| |
| pins = devm_kcalloc(&pdev->dev, num_gpios, |
| sizeof(struct pinctrl_pin_desc), GFP_KERNEL); |
| groups = devm_kcalloc(&pdev->dev, num_gpios, |
| sizeof(struct msm_pingroup), GFP_KERNEL); |
| names = devm_kcalloc(&pdev->dev, num_gpios, NAME_SIZE, GFP_KERNEL); |
| |
| if (!pins || !groups || !names) |
| return -ENOMEM; |
| |
| for (i = 0; i < num_gpios; i++) { |
| snprintf(names[i], NAME_SIZE, "gpio%u", i); |
| |
| pins[i].number = i; |
| pins[i].name = names[i]; |
| |
| groups[i].npins = 1; |
| groups[i].name = names[i]; |
| groups[i].pins = &pins[i].number; |
| |
| groups[i].ctl_reg = 0x10000 * i; |
| groups[i].io_reg = 0x04 + 0x10000 * i; |
| groups[i].intr_cfg_reg = 0x08 + 0x10000 * i; |
| groups[i].intr_status_reg = 0x0c + 0x10000 * i; |
| groups[i].intr_target_reg = 0x08 + 0x10000 * i; |
| |
| groups[i].mux_bit = 2; |
| groups[i].pull_bit = 0; |
| groups[i].drv_bit = 6; |
| groups[i].oe_bit = 9; |
| groups[i].in_bit = 0; |
| groups[i].out_bit = 1; |
| groups[i].intr_enable_bit = 0; |
| groups[i].intr_status_bit = 0; |
| groups[i].intr_target_bit = 5; |
| groups[i].intr_target_kpss_val = 1; |
| groups[i].intr_raw_status_bit = 4; |
| groups[i].intr_polarity_bit = 1; |
| groups[i].intr_detection_bit = 2; |
| groups[i].intr_detection_width = 2; |
| } |
| |
| qdf2xxx_pinctrl.pins = pins; |
| qdf2xxx_pinctrl.groups = groups; |
| qdf2xxx_pinctrl.npins = num_gpios; |
| qdf2xxx_pinctrl.ngroups = num_gpios; |
| qdf2xxx_pinctrl.ngpios = num_gpios; |
| |
| return msm_pinctrl_probe(pdev, &qdf2xxx_pinctrl); |
| } |
| |
| static const struct acpi_device_id qdf2xxx_acpi_ids[] = { |
| {"QCOM8001"}, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(acpi, qdf2xxx_acpi_ids); |
| |
| static struct platform_driver qdf2xxx_pinctrl_driver = { |
| .driver = { |
| .name = "qdf2xxx-pinctrl", |
| .acpi_match_table = ACPI_PTR(qdf2xxx_acpi_ids), |
| }, |
| .probe = qdf2xxx_pinctrl_probe, |
| .remove = msm_pinctrl_remove, |
| }; |
| |
| static int __init qdf2xxx_pinctrl_init(void) |
| { |
| return platform_driver_register(&qdf2xxx_pinctrl_driver); |
| } |
| arch_initcall(qdf2xxx_pinctrl_init); |
| |
| static void __exit qdf2xxx_pinctrl_exit(void) |
| { |
| platform_driver_unregister(&qdf2xxx_pinctrl_driver); |
| } |
| module_exit(qdf2xxx_pinctrl_exit); |
| |
| MODULE_DESCRIPTION("Qualcomm Technologies QDF2xxx pin control driver"); |
| MODULE_LICENSE("GPL v2"); |