| /* |
| * Linux driver attachment glue for PCI based U320 controllers. |
| * |
| * Copyright (c) 2000-2001 Adaptec Inc. |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions, and the following disclaimer, |
| * without modification. |
| * 2. Redistributions in binary form must reproduce at minimum a disclaimer |
| * substantially similar to the "NO WARRANTY" disclaimer below |
| * ("Disclaimer") and any redistribution must be conditioned upon |
| * including a substantially similar Disclaimer requirement for further |
| * binary redistribution. |
| * 3. Neither the names of the above-listed copyright holders nor the names |
| * of any contributors may be used to endorse or promote products derived |
| * from this software without specific prior written permission. |
| * |
| * Alternatively, this software may be distributed under the terms of the |
| * GNU General Public License ("GPL") version 2 as published by the Free |
| * Software Foundation. |
| * |
| * NO WARRANTY |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS |
| * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) |
| * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, |
| * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING |
| * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
| * POSSIBILITY OF SUCH DAMAGES. |
| * |
| * $Id: //depot/aic7xxx/linux/drivers/scsi/aic7xxx/aic79xx_osm_pci.c#25 $ |
| */ |
| |
| #include "aic79xx_osm.h" |
| #include "aic79xx_inline.h" |
| #include "aic79xx_pci.h" |
| |
| /* Define the macro locally since it's different for different class of chips. |
| */ |
| #define ID(x) \ |
| ID2C(x), \ |
| ID2C(IDIROC(x)) |
| |
| static const struct pci_device_id ahd_linux_pci_id_table[] = { |
| /* aic7901 based controllers */ |
| ID(ID_AHA_29320A), |
| ID(ID_AHA_29320ALP), |
| ID(ID_AHA_29320LPE), |
| /* aic7902 based controllers */ |
| ID(ID_AHA_29320), |
| ID(ID_AHA_29320B), |
| ID(ID_AHA_29320LP), |
| ID(ID_AHA_39320), |
| ID(ID_AHA_39320_B), |
| ID(ID_AHA_39320A), |
| ID(ID_AHA_39320D), |
| ID(ID_AHA_39320D_HP), |
| ID(ID_AHA_39320D_B), |
| ID(ID_AHA_39320D_B_HP), |
| /* Generic chip probes for devices we don't know exactly. */ |
| ID16(ID_AIC7901 & ID_9005_GENERIC_MASK), |
| ID(ID_AIC7901A & ID_DEV_VENDOR_MASK), |
| ID16(ID_AIC7902 & ID_9005_GENERIC_MASK), |
| { 0 } |
| }; |
| |
| MODULE_DEVICE_TABLE(pci, ahd_linux_pci_id_table); |
| |
| #ifdef CONFIG_PM |
| static int |
| ahd_linux_pci_dev_suspend(struct pci_dev *pdev, pm_message_t mesg) |
| { |
| struct ahd_softc *ahd = pci_get_drvdata(pdev); |
| int rc; |
| |
| if ((rc = ahd_suspend(ahd))) |
| return rc; |
| |
| ahd_pci_suspend(ahd); |
| |
| pci_save_state(pdev); |
| pci_disable_device(pdev); |
| |
| if (mesg.event & PM_EVENT_SLEEP) |
| pci_set_power_state(pdev, PCI_D3hot); |
| |
| return rc; |
| } |
| |
| static int |
| ahd_linux_pci_dev_resume(struct pci_dev *pdev) |
| { |
| struct ahd_softc *ahd = pci_get_drvdata(pdev); |
| int rc; |
| |
| pci_set_power_state(pdev, PCI_D0); |
| pci_restore_state(pdev); |
| |
| if ((rc = pci_enable_device(pdev))) { |
| dev_printk(KERN_ERR, &pdev->dev, |
| "failed to enable device after resume (%d)\n", rc); |
| return rc; |
| } |
| |
| pci_set_master(pdev); |
| |
| ahd_pci_resume(ahd); |
| |
| ahd_resume(ahd); |
| |
| return rc; |
| } |
| #endif |
| |
| static void |
| ahd_linux_pci_dev_remove(struct pci_dev *pdev) |
| { |
| struct ahd_softc *ahd = pci_get_drvdata(pdev); |
| u_long s; |
| |
| if (ahd->platform_data && ahd->platform_data->host) |
| scsi_remove_host(ahd->platform_data->host); |
| |
| ahd_lock(ahd, &s); |
| ahd_intr_enable(ahd, FALSE); |
| ahd_unlock(ahd, &s); |
| ahd_free(ahd); |
| } |
| |
| static void |
| ahd_linux_pci_inherit_flags(struct ahd_softc *ahd) |
| { |
| struct pci_dev *pdev = ahd->dev_softc, *master_pdev; |
| unsigned int master_devfn = PCI_DEVFN(PCI_SLOT(pdev->devfn), 0); |
| |
| master_pdev = pci_get_slot(pdev->bus, master_devfn); |
| if (master_pdev) { |
| struct ahd_softc *master = pci_get_drvdata(master_pdev); |
| if (master) { |
| ahd->flags &= ~AHD_BIOS_ENABLED; |
| ahd->flags |= master->flags & AHD_BIOS_ENABLED; |
| } else |
| printk(KERN_ERR "aic79xx: no multichannel peer found!\n"); |
| pci_dev_put(master_pdev); |
| } |
| } |
| |
| static int |
| ahd_linux_pci_dev_probe(struct pci_dev *pdev, const struct pci_device_id *ent) |
| { |
| char buf[80]; |
| struct ahd_softc *ahd; |
| ahd_dev_softc_t pci; |
| const struct ahd_pci_identity *entry; |
| char *name; |
| int error; |
| struct device *dev = &pdev->dev; |
| |
| pci = pdev; |
| entry = ahd_find_pci_device(pci); |
| if (entry == NULL) |
| return (-ENODEV); |
| |
| /* |
| * Allocate a softc for this card and |
| * set it up for attachment by our |
| * common detect routine. |
| */ |
| sprintf(buf, "ahd_pci:%d:%d:%d", |
| ahd_get_pci_bus(pci), |
| ahd_get_pci_slot(pci), |
| ahd_get_pci_function(pci)); |
| name = kstrdup(buf, GFP_ATOMIC); |
| if (name == NULL) |
| return (-ENOMEM); |
| ahd = ahd_alloc(NULL, name); |
| if (ahd == NULL) |
| return (-ENOMEM); |
| if (pci_enable_device(pdev)) { |
| ahd_free(ahd); |
| return (-ENODEV); |
| } |
| pci_set_master(pdev); |
| |
| if (sizeof(dma_addr_t) > 4) { |
| const u64 required_mask = dma_get_required_mask(dev); |
| |
| if (required_mask > DMA_BIT_MASK(39) && |
| dma_set_mask(dev, DMA_BIT_MASK(64)) == 0) |
| ahd->flags |= AHD_64BIT_ADDRESSING; |
| else if (required_mask > DMA_BIT_MASK(32) && |
| dma_set_mask(dev, DMA_BIT_MASK(39)) == 0) |
| ahd->flags |= AHD_39BIT_ADDRESSING; |
| else |
| dma_set_mask(dev, DMA_BIT_MASK(32)); |
| } else { |
| dma_set_mask(dev, DMA_BIT_MASK(32)); |
| } |
| ahd->dev_softc = pci; |
| error = ahd_pci_config(ahd, entry); |
| if (error != 0) { |
| ahd_free(ahd); |
| return (-error); |
| } |
| |
| /* |
| * Second Function PCI devices need to inherit some |
| * * settings from function 0. |
| */ |
| if ((ahd->features & AHD_MULTI_FUNC) && PCI_FUNC(pdev->devfn) != 0) |
| ahd_linux_pci_inherit_flags(ahd); |
| |
| pci_set_drvdata(pdev, ahd); |
| |
| ahd_linux_register_host(ahd, &aic79xx_driver_template); |
| return (0); |
| } |
| |
| static struct pci_driver aic79xx_pci_driver = { |
| .name = "aic79xx", |
| .probe = ahd_linux_pci_dev_probe, |
| #ifdef CONFIG_PM |
| .suspend = ahd_linux_pci_dev_suspend, |
| .resume = ahd_linux_pci_dev_resume, |
| #endif |
| .remove = ahd_linux_pci_dev_remove, |
| .id_table = ahd_linux_pci_id_table |
| }; |
| |
| int |
| ahd_linux_pci_init(void) |
| { |
| return pci_register_driver(&aic79xx_pci_driver); |
| } |
| |
| void |
| ahd_linux_pci_exit(void) |
| { |
| pci_unregister_driver(&aic79xx_pci_driver); |
| } |
| |
| static int |
| ahd_linux_pci_reserve_io_regions(struct ahd_softc *ahd, resource_size_t *base, |
| resource_size_t *base2) |
| { |
| *base = pci_resource_start(ahd->dev_softc, 0); |
| /* |
| * This is really the 3rd bar and should be at index 2, |
| * but the Linux PCI code doesn't know how to "count" 64bit |
| * bars. |
| */ |
| *base2 = pci_resource_start(ahd->dev_softc, 3); |
| if (*base == 0 || *base2 == 0) |
| return (ENOMEM); |
| if (!request_region(*base, 256, "aic79xx")) |
| return (ENOMEM); |
| if (!request_region(*base2, 256, "aic79xx")) { |
| release_region(*base, 256); |
| return (ENOMEM); |
| } |
| return (0); |
| } |
| |
| static int |
| ahd_linux_pci_reserve_mem_region(struct ahd_softc *ahd, |
| resource_size_t *bus_addr, |
| uint8_t __iomem **maddr) |
| { |
| resource_size_t start; |
| resource_size_t base_page; |
| u_long base_offset; |
| int error = 0; |
| |
| if (aic79xx_allow_memio == 0) |
| return (ENOMEM); |
| |
| if ((ahd->bugs & AHD_PCIX_MMAPIO_BUG) != 0) |
| return (ENOMEM); |
| |
| start = pci_resource_start(ahd->dev_softc, 1); |
| base_page = start & PAGE_MASK; |
| base_offset = start - base_page; |
| if (start != 0) { |
| *bus_addr = start; |
| if (!request_mem_region(start, 0x1000, "aic79xx")) |
| error = ENOMEM; |
| if (!error) { |
| *maddr = ioremap_nocache(base_page, base_offset + 512); |
| if (*maddr == NULL) { |
| error = ENOMEM; |
| release_mem_region(start, 0x1000); |
| } else |
| *maddr += base_offset; |
| } |
| } else |
| error = ENOMEM; |
| return (error); |
| } |
| |
| int |
| ahd_pci_map_registers(struct ahd_softc *ahd) |
| { |
| uint32_t command; |
| resource_size_t base; |
| uint8_t __iomem *maddr; |
| int error; |
| |
| /* |
| * If its allowed, we prefer memory mapped access. |
| */ |
| command = ahd_pci_read_config(ahd->dev_softc, PCIR_COMMAND, 4); |
| command &= ~(PCIM_CMD_PORTEN|PCIM_CMD_MEMEN); |
| base = 0; |
| maddr = NULL; |
| error = ahd_linux_pci_reserve_mem_region(ahd, &base, &maddr); |
| if (error == 0) { |
| ahd->platform_data->mem_busaddr = base; |
| ahd->tags[0] = BUS_SPACE_MEMIO; |
| ahd->bshs[0].maddr = maddr; |
| ahd->tags[1] = BUS_SPACE_MEMIO; |
| ahd->bshs[1].maddr = maddr + 0x100; |
| ahd_pci_write_config(ahd->dev_softc, PCIR_COMMAND, |
| command | PCIM_CMD_MEMEN, 4); |
| |
| if (ahd_pci_test_register_access(ahd) != 0) { |
| |
| printk("aic79xx: PCI Device %d:%d:%d " |
| "failed memory mapped test. Using PIO.\n", |
| ahd_get_pci_bus(ahd->dev_softc), |
| ahd_get_pci_slot(ahd->dev_softc), |
| ahd_get_pci_function(ahd->dev_softc)); |
| iounmap(maddr); |
| release_mem_region(ahd->platform_data->mem_busaddr, |
| 0x1000); |
| ahd->bshs[0].maddr = NULL; |
| maddr = NULL; |
| } else |
| command |= PCIM_CMD_MEMEN; |
| } else if (bootverbose) { |
| printk("aic79xx: PCI%d:%d:%d MEM region 0x%llx " |
| "unavailable. Cannot memory map device.\n", |
| ahd_get_pci_bus(ahd->dev_softc), |
| ahd_get_pci_slot(ahd->dev_softc), |
| ahd_get_pci_function(ahd->dev_softc), |
| (unsigned long long)base); |
| } |
| |
| if (maddr == NULL) { |
| resource_size_t base2; |
| |
| error = ahd_linux_pci_reserve_io_regions(ahd, &base, &base2); |
| if (error == 0) { |
| ahd->tags[0] = BUS_SPACE_PIO; |
| ahd->tags[1] = BUS_SPACE_PIO; |
| ahd->bshs[0].ioport = (u_long)base; |
| ahd->bshs[1].ioport = (u_long)base2; |
| command |= PCIM_CMD_PORTEN; |
| } else { |
| printk("aic79xx: PCI%d:%d:%d IO regions 0x%llx and " |
| "0x%llx unavailable. Cannot map device.\n", |
| ahd_get_pci_bus(ahd->dev_softc), |
| ahd_get_pci_slot(ahd->dev_softc), |
| ahd_get_pci_function(ahd->dev_softc), |
| (unsigned long long)base, |
| (unsigned long long)base2); |
| } |
| } |
| ahd_pci_write_config(ahd->dev_softc, PCIR_COMMAND, command, 4); |
| return (error); |
| } |
| |
| int |
| ahd_pci_map_int(struct ahd_softc *ahd) |
| { |
| int error; |
| |
| error = request_irq(ahd->dev_softc->irq, ahd_linux_isr, |
| IRQF_SHARED, "aic79xx", ahd); |
| if (!error) |
| ahd->platform_data->irq = ahd->dev_softc->irq; |
| |
| return (-error); |
| } |
| |
| void |
| ahd_power_state_change(struct ahd_softc *ahd, ahd_power_state new_state) |
| { |
| pci_set_power_state(ahd->dev_softc, new_state); |
| } |