| /* |
| * Test functionality of BPF filters for SO_REUSEPORT. The tests below will use |
| * a BPF program (both classic and extended) to read the first word from an |
| * incoming packet (expected to be in network byte-order), calculate a modulus |
| * of that number, and then dispatch the packet to the Nth socket using the |
| * result. These tests are run for each supported address family and protocol. |
| * Additionally, a few edge cases in the implementation are tested. |
| */ |
| |
| #include <errno.h> |
| #include <error.h> |
| #include <fcntl.h> |
| #include <linux/bpf.h> |
| #include <linux/filter.h> |
| #include <linux/unistd.h> |
| #include <netinet/in.h> |
| #include <netinet/tcp.h> |
| #include <stdio.h> |
| #include <stdlib.h> |
| #include <string.h> |
| #include <sys/epoll.h> |
| #include <sys/types.h> |
| #include <sys/socket.h> |
| #include <unistd.h> |
| |
| #ifndef ARRAY_SIZE |
| #define ARRAY_SIZE(arr) (sizeof(arr) / sizeof((arr)[0])) |
| #endif |
| |
| struct test_params { |
| int recv_family; |
| int send_family; |
| int protocol; |
| size_t recv_socks; |
| uint16_t recv_port; |
| uint16_t send_port_min; |
| }; |
| |
| static size_t sockaddr_size(void) |
| { |
| return sizeof(struct sockaddr_storage); |
| } |
| |
| static struct sockaddr *new_any_sockaddr(int family, uint16_t port) |
| { |
| struct sockaddr_storage *addr; |
| struct sockaddr_in *addr4; |
| struct sockaddr_in6 *addr6; |
| |
| addr = malloc(sizeof(struct sockaddr_storage)); |
| memset(addr, 0, sizeof(struct sockaddr_storage)); |
| |
| switch (family) { |
| case AF_INET: |
| addr4 = (struct sockaddr_in *)addr; |
| addr4->sin_family = AF_INET; |
| addr4->sin_addr.s_addr = htonl(INADDR_ANY); |
| addr4->sin_port = htons(port); |
| break; |
| case AF_INET6: |
| addr6 = (struct sockaddr_in6 *)addr; |
| addr6->sin6_family = AF_INET6; |
| addr6->sin6_addr = in6addr_any; |
| addr6->sin6_port = htons(port); |
| break; |
| default: |
| error(1, 0, "Unsupported family %d", family); |
| } |
| return (struct sockaddr *)addr; |
| } |
| |
| static struct sockaddr *new_loopback_sockaddr(int family, uint16_t port) |
| { |
| struct sockaddr *addr = new_any_sockaddr(family, port); |
| struct sockaddr_in *addr4; |
| struct sockaddr_in6 *addr6; |
| |
| switch (family) { |
| case AF_INET: |
| addr4 = (struct sockaddr_in *)addr; |
| addr4->sin_addr.s_addr = htonl(INADDR_LOOPBACK); |
| break; |
| case AF_INET6: |
| addr6 = (struct sockaddr_in6 *)addr; |
| addr6->sin6_addr = in6addr_loopback; |
| break; |
| default: |
| error(1, 0, "Unsupported family %d", family); |
| } |
| return addr; |
| } |
| |
| static void attach_ebpf(int fd, uint16_t mod) |
| { |
| static char bpf_log_buf[65536]; |
| static const char bpf_license[] = "GPL"; |
| |
| int bpf_fd; |
| const struct bpf_insn prog[] = { |
| /* BPF_MOV64_REG(BPF_REG_6, BPF_REG_1) */ |
| { BPF_ALU64 | BPF_MOV | BPF_X, BPF_REG_6, BPF_REG_1, 0, 0 }, |
| /* BPF_LD_ABS(BPF_W, 0) R0 = (uint32_t)skb[0] */ |
| { BPF_LD | BPF_ABS | BPF_W, 0, 0, 0, 0 }, |
| /* BPF_ALU64_IMM(BPF_MOD, BPF_REG_0, mod) */ |
| { BPF_ALU64 | BPF_MOD | BPF_K, BPF_REG_0, 0, 0, mod }, |
| /* BPF_EXIT_INSN() */ |
| { BPF_JMP | BPF_EXIT, 0, 0, 0, 0 } |
| }; |
| union bpf_attr attr; |
| |
| memset(&attr, 0, sizeof(attr)); |
| attr.prog_type = BPF_PROG_TYPE_SOCKET_FILTER; |
| attr.insn_cnt = ARRAY_SIZE(prog); |
| attr.insns = (unsigned long) &prog; |
| attr.license = (unsigned long) &bpf_license; |
| attr.log_buf = (unsigned long) &bpf_log_buf; |
| attr.log_size = sizeof(bpf_log_buf); |
| attr.log_level = 1; |
| attr.kern_version = 0; |
| |
| bpf_fd = syscall(__NR_bpf, BPF_PROG_LOAD, &attr, sizeof(attr)); |
| if (bpf_fd < 0) |
| error(1, errno, "ebpf error. log:\n%s\n", bpf_log_buf); |
| |
| if (setsockopt(fd, SOL_SOCKET, SO_ATTACH_REUSEPORT_EBPF, &bpf_fd, |
| sizeof(bpf_fd))) |
| error(1, errno, "failed to set SO_ATTACH_REUSEPORT_EBPF"); |
| |
| close(bpf_fd); |
| } |
| |
| static void attach_cbpf(int fd, uint16_t mod) |
| { |
| struct sock_filter code[] = { |
| /* A = (uint32_t)skb[0] */ |
| { BPF_LD | BPF_W | BPF_ABS, 0, 0, 0 }, |
| /* A = A % mod */ |
| { BPF_ALU | BPF_MOD, 0, 0, mod }, |
| /* return A */ |
| { BPF_RET | BPF_A, 0, 0, 0 }, |
| }; |
| struct sock_fprog p = { |
| .len = ARRAY_SIZE(code), |
| .filter = code, |
| }; |
| |
| if (setsockopt(fd, SOL_SOCKET, SO_ATTACH_REUSEPORT_CBPF, &p, sizeof(p))) |
| error(1, errno, "failed to set SO_ATTACH_REUSEPORT_CBPF"); |
| } |
| |
| static void build_recv_group(const struct test_params p, int fd[], uint16_t mod, |
| void (*attach_bpf)(int, uint16_t)) |
| { |
| struct sockaddr * const addr = |
| new_any_sockaddr(p.recv_family, p.recv_port); |
| int i, opt; |
| |
| for (i = 0; i < p.recv_socks; ++i) { |
| fd[i] = socket(p.recv_family, p.protocol, 0); |
| if (fd[i] < 0) |
| error(1, errno, "failed to create recv %d", i); |
| |
| opt = 1; |
| if (setsockopt(fd[i], SOL_SOCKET, SO_REUSEPORT, &opt, |
| sizeof(opt))) |
| error(1, errno, "failed to set SO_REUSEPORT on %d", i); |
| |
| if (i == 0) |
| attach_bpf(fd[i], mod); |
| |
| if (bind(fd[i], addr, sockaddr_size())) |
| error(1, errno, "failed to bind recv socket %d", i); |
| |
| if (p.protocol == SOCK_STREAM) { |
| opt = 4; |
| if (setsockopt(fd[i], SOL_TCP, TCP_FASTOPEN, &opt, |
| sizeof(opt))) |
| error(1, errno, |
| "failed to set TCP_FASTOPEN on %d", i); |
| if (listen(fd[i], p.recv_socks * 10)) |
| error(1, errno, "failed to listen on socket"); |
| } |
| } |
| free(addr); |
| } |
| |
| static void send_from(struct test_params p, uint16_t sport, char *buf, |
| size_t len) |
| { |
| struct sockaddr * const saddr = new_any_sockaddr(p.send_family, sport); |
| struct sockaddr * const daddr = |
| new_loopback_sockaddr(p.send_family, p.recv_port); |
| const int fd = socket(p.send_family, p.protocol, 0); |
| |
| if (fd < 0) |
| error(1, errno, "failed to create send socket"); |
| |
| if (bind(fd, saddr, sockaddr_size())) |
| error(1, errno, "failed to bind send socket"); |
| |
| if (sendto(fd, buf, len, MSG_FASTOPEN, daddr, sockaddr_size()) < 0) |
| error(1, errno, "failed to send message"); |
| |
| close(fd); |
| free(saddr); |
| free(daddr); |
| } |
| |
| static void test_recv_order(const struct test_params p, int fd[], int mod) |
| { |
| char recv_buf[8], send_buf[8]; |
| struct msghdr msg; |
| struct iovec recv_io = { recv_buf, 8 }; |
| struct epoll_event ev; |
| int epfd, conn, i, sport, expected; |
| uint32_t data, ndata; |
| |
| epfd = epoll_create(1); |
| if (epfd < 0) |
| error(1, errno, "failed to create epoll"); |
| for (i = 0; i < p.recv_socks; ++i) { |
| ev.events = EPOLLIN; |
| ev.data.fd = fd[i]; |
| if (epoll_ctl(epfd, EPOLL_CTL_ADD, fd[i], &ev)) |
| error(1, errno, "failed to register sock %d epoll", i); |
| } |
| |
| memset(&msg, 0, sizeof(msg)); |
| msg.msg_iov = &recv_io; |
| msg.msg_iovlen = 1; |
| |
| for (data = 0; data < p.recv_socks * 2; ++data) { |
| sport = p.send_port_min + data; |
| ndata = htonl(data); |
| memcpy(send_buf, &ndata, sizeof(ndata)); |
| send_from(p, sport, send_buf, sizeof(ndata)); |
| |
| i = epoll_wait(epfd, &ev, 1, -1); |
| if (i < 0) |
| error(1, errno, "epoll wait failed"); |
| |
| if (p.protocol == SOCK_STREAM) { |
| conn = accept(ev.data.fd, NULL, NULL); |
| if (conn < 0) |
| error(1, errno, "error accepting"); |
| i = recvmsg(conn, &msg, 0); |
| close(conn); |
| } else { |
| i = recvmsg(ev.data.fd, &msg, 0); |
| } |
| if (i < 0) |
| error(1, errno, "recvmsg error"); |
| if (i != sizeof(ndata)) |
| error(1, 0, "expected size %zd got %d", |
| sizeof(ndata), i); |
| |
| for (i = 0; i < p.recv_socks; ++i) |
| if (ev.data.fd == fd[i]) |
| break; |
| memcpy(&ndata, recv_buf, sizeof(ndata)); |
| fprintf(stderr, "Socket %d: %d\n", i, ntohl(ndata)); |
| |
| expected = (sport % mod); |
| if (i != expected) |
| error(1, 0, "expected socket %d", expected); |
| } |
| } |
| |
| static void test_reuseport_ebpf(struct test_params p) |
| { |
| int i, fd[p.recv_socks]; |
| |
| fprintf(stderr, "Testing EBPF mod %zd...\n", p.recv_socks); |
| build_recv_group(p, fd, p.recv_socks, attach_ebpf); |
| test_recv_order(p, fd, p.recv_socks); |
| |
| p.send_port_min += p.recv_socks * 2; |
| fprintf(stderr, "Reprograming, testing mod %zd...\n", p.recv_socks / 2); |
| attach_ebpf(fd[0], p.recv_socks / 2); |
| test_recv_order(p, fd, p.recv_socks / 2); |
| |
| for (i = 0; i < p.recv_socks; ++i) |
| close(fd[i]); |
| } |
| |
| static void test_reuseport_cbpf(struct test_params p) |
| { |
| int i, fd[p.recv_socks]; |
| |
| fprintf(stderr, "Testing CBPF mod %zd...\n", p.recv_socks); |
| build_recv_group(p, fd, p.recv_socks, attach_cbpf); |
| test_recv_order(p, fd, p.recv_socks); |
| |
| p.send_port_min += p.recv_socks * 2; |
| fprintf(stderr, "Reprograming, testing mod %zd...\n", p.recv_socks / 2); |
| attach_cbpf(fd[0], p.recv_socks / 2); |
| test_recv_order(p, fd, p.recv_socks / 2); |
| |
| for (i = 0; i < p.recv_socks; ++i) |
| close(fd[i]); |
| } |
| |
| static void test_extra_filter(const struct test_params p) |
| { |
| struct sockaddr * const addr = |
| new_any_sockaddr(p.recv_family, p.recv_port); |
| int fd1, fd2, opt; |
| |
| fprintf(stderr, "Testing too many filters...\n"); |
| fd1 = socket(p.recv_family, p.protocol, 0); |
| if (fd1 < 0) |
| error(1, errno, "failed to create socket 1"); |
| fd2 = socket(p.recv_family, p.protocol, 0); |
| if (fd2 < 0) |
| error(1, errno, "failed to create socket 2"); |
| |
| opt = 1; |
| if (setsockopt(fd1, SOL_SOCKET, SO_REUSEPORT, &opt, sizeof(opt))) |
| error(1, errno, "failed to set SO_REUSEPORT on socket 1"); |
| if (setsockopt(fd2, SOL_SOCKET, SO_REUSEPORT, &opt, sizeof(opt))) |
| error(1, errno, "failed to set SO_REUSEPORT on socket 2"); |
| |
| attach_ebpf(fd1, 10); |
| attach_ebpf(fd2, 10); |
| |
| if (bind(fd1, addr, sockaddr_size())) |
| error(1, errno, "failed to bind recv socket 1"); |
| |
| if (!bind(fd2, addr, sockaddr_size()) && errno != EADDRINUSE) |
| error(1, errno, "bind socket 2 should fail with EADDRINUSE"); |
| |
| free(addr); |
| } |
| |
| static void test_filter_no_reuseport(const struct test_params p) |
| { |
| struct sockaddr * const addr = |
| new_any_sockaddr(p.recv_family, p.recv_port); |
| const char bpf_license[] = "GPL"; |
| struct bpf_insn ecode[] = { |
| { BPF_ALU64 | BPF_MOV | BPF_K, BPF_REG_0, 0, 0, 10 }, |
| { BPF_JMP | BPF_EXIT, 0, 0, 0, 0 } |
| }; |
| struct sock_filter ccode[] = {{ BPF_RET | BPF_A, 0, 0, 0 }}; |
| union bpf_attr eprog; |
| struct sock_fprog cprog; |
| int fd, bpf_fd; |
| |
| fprintf(stderr, "Testing filters on non-SO_REUSEPORT socket...\n"); |
| |
| memset(&eprog, 0, sizeof(eprog)); |
| eprog.prog_type = BPF_PROG_TYPE_SOCKET_FILTER; |
| eprog.insn_cnt = ARRAY_SIZE(ecode); |
| eprog.insns = (unsigned long) &ecode; |
| eprog.license = (unsigned long) &bpf_license; |
| eprog.kern_version = 0; |
| |
| memset(&cprog, 0, sizeof(cprog)); |
| cprog.len = ARRAY_SIZE(ccode); |
| cprog.filter = ccode; |
| |
| |
| bpf_fd = syscall(__NR_bpf, BPF_PROG_LOAD, &eprog, sizeof(eprog)); |
| if (bpf_fd < 0) |
| error(1, errno, "ebpf error"); |
| fd = socket(p.recv_family, p.protocol, 0); |
| if (fd < 0) |
| error(1, errno, "failed to create socket 1"); |
| |
| if (bind(fd, addr, sockaddr_size())) |
| error(1, errno, "failed to bind recv socket 1"); |
| |
| errno = 0; |
| if (!setsockopt(fd, SOL_SOCKET, SO_ATTACH_REUSEPORT_EBPF, &bpf_fd, |
| sizeof(bpf_fd)) || errno != EINVAL) |
| error(1, errno, "setsockopt should have returned EINVAL"); |
| |
| errno = 0; |
| if (!setsockopt(fd, SOL_SOCKET, SO_ATTACH_REUSEPORT_CBPF, &cprog, |
| sizeof(cprog)) || errno != EINVAL) |
| error(1, errno, "setsockopt should have returned EINVAL"); |
| |
| free(addr); |
| } |
| |
| static void test_filter_without_bind(void) |
| { |
| int fd1, fd2, opt = 1; |
| |
| fprintf(stderr, "Testing filter add without bind...\n"); |
| fd1 = socket(AF_INET, SOCK_DGRAM, 0); |
| if (fd1 < 0) |
| error(1, errno, "failed to create socket 1"); |
| fd2 = socket(AF_INET, SOCK_DGRAM, 0); |
| if (fd2 < 0) |
| error(1, errno, "failed to create socket 2"); |
| if (setsockopt(fd1, SOL_SOCKET, SO_REUSEPORT, &opt, sizeof(opt))) |
| error(1, errno, "failed to set SO_REUSEPORT on socket 1"); |
| if (setsockopt(fd2, SOL_SOCKET, SO_REUSEPORT, &opt, sizeof(opt))) |
| error(1, errno, "failed to set SO_REUSEPORT on socket 2"); |
| |
| attach_ebpf(fd1, 10); |
| attach_cbpf(fd2, 10); |
| |
| close(fd1); |
| close(fd2); |
| } |
| |
| void enable_fastopen(void) |
| { |
| int fd = open("/proc/sys/net/ipv4/tcp_fastopen", 0); |
| int rw_mask = 3; /* bit 1: client side; bit-2 server side */ |
| int val, size; |
| char buf[16]; |
| |
| if (fd < 0) |
| error(1, errno, "Unable to open tcp_fastopen sysctl"); |
| if (read(fd, buf, sizeof(buf)) <= 0) |
| error(1, errno, "Unable to read tcp_fastopen sysctl"); |
| val = atoi(buf); |
| close(fd); |
| |
| if ((val & rw_mask) != rw_mask) { |
| fd = open("/proc/sys/net/ipv4/tcp_fastopen", O_RDWR); |
| if (fd < 0) |
| error(1, errno, |
| "Unable to open tcp_fastopen sysctl for writing"); |
| val |= rw_mask; |
| size = snprintf(buf, 16, "%d", val); |
| if (write(fd, buf, size) <= 0) |
| error(1, errno, "Unable to write tcp_fastopen sysctl"); |
| close(fd); |
| } |
| } |
| |
| int main(void) |
| { |
| fprintf(stderr, "---- IPv4 UDP ----\n"); |
| /* NOTE: UDP socket lookups traverse a different code path when there |
| * are > 10 sockets in a group. Run the bpf test through both paths. |
| */ |
| test_reuseport_ebpf((struct test_params) { |
| .recv_family = AF_INET, |
| .send_family = AF_INET, |
| .protocol = SOCK_DGRAM, |
| .recv_socks = 10, |
| .recv_port = 8000, |
| .send_port_min = 9000}); |
| test_reuseport_ebpf((struct test_params) { |
| .recv_family = AF_INET, |
| .send_family = AF_INET, |
| .protocol = SOCK_DGRAM, |
| .recv_socks = 20, |
| .recv_port = 8000, |
| .send_port_min = 9000}); |
| test_reuseport_cbpf((struct test_params) { |
| .recv_family = AF_INET, |
| .send_family = AF_INET, |
| .protocol = SOCK_DGRAM, |
| .recv_socks = 10, |
| .recv_port = 8001, |
| .send_port_min = 9020}); |
| test_reuseport_cbpf((struct test_params) { |
| .recv_family = AF_INET, |
| .send_family = AF_INET, |
| .protocol = SOCK_DGRAM, |
| .recv_socks = 20, |
| .recv_port = 8001, |
| .send_port_min = 9020}); |
| test_extra_filter((struct test_params) { |
| .recv_family = AF_INET, |
| .protocol = SOCK_DGRAM, |
| .recv_port = 8002}); |
| test_filter_no_reuseport((struct test_params) { |
| .recv_family = AF_INET, |
| .protocol = SOCK_DGRAM, |
| .recv_port = 8008}); |
| |
| fprintf(stderr, "---- IPv6 UDP ----\n"); |
| test_reuseport_ebpf((struct test_params) { |
| .recv_family = AF_INET6, |
| .send_family = AF_INET6, |
| .protocol = SOCK_DGRAM, |
| .recv_socks = 10, |
| .recv_port = 8003, |
| .send_port_min = 9040}); |
| test_reuseport_ebpf((struct test_params) { |
| .recv_family = AF_INET6, |
| .send_family = AF_INET6, |
| .protocol = SOCK_DGRAM, |
| .recv_socks = 20, |
| .recv_port = 8003, |
| .send_port_min = 9040}); |
| test_reuseport_cbpf((struct test_params) { |
| .recv_family = AF_INET6, |
| .send_family = AF_INET6, |
| .protocol = SOCK_DGRAM, |
| .recv_socks = 10, |
| .recv_port = 8004, |
| .send_port_min = 9060}); |
| test_reuseport_cbpf((struct test_params) { |
| .recv_family = AF_INET6, |
| .send_family = AF_INET6, |
| .protocol = SOCK_DGRAM, |
| .recv_socks = 20, |
| .recv_port = 8004, |
| .send_port_min = 9060}); |
| test_extra_filter((struct test_params) { |
| .recv_family = AF_INET6, |
| .protocol = SOCK_DGRAM, |
| .recv_port = 8005}); |
| test_filter_no_reuseport((struct test_params) { |
| .recv_family = AF_INET6, |
| .protocol = SOCK_DGRAM, |
| .recv_port = 8009}); |
| |
| fprintf(stderr, "---- IPv6 UDP w/ mapped IPv4 ----\n"); |
| test_reuseport_ebpf((struct test_params) { |
| .recv_family = AF_INET6, |
| .send_family = AF_INET, |
| .protocol = SOCK_DGRAM, |
| .recv_socks = 20, |
| .recv_port = 8006, |
| .send_port_min = 9080}); |
| test_reuseport_ebpf((struct test_params) { |
| .recv_family = AF_INET6, |
| .send_family = AF_INET, |
| .protocol = SOCK_DGRAM, |
| .recv_socks = 10, |
| .recv_port = 8006, |
| .send_port_min = 9080}); |
| test_reuseport_cbpf((struct test_params) { |
| .recv_family = AF_INET6, |
| .send_family = AF_INET, |
| .protocol = SOCK_DGRAM, |
| .recv_socks = 10, |
| .recv_port = 8007, |
| .send_port_min = 9100}); |
| test_reuseport_cbpf((struct test_params) { |
| .recv_family = AF_INET6, |
| .send_family = AF_INET, |
| .protocol = SOCK_DGRAM, |
| .recv_socks = 20, |
| .recv_port = 8007, |
| .send_port_min = 9100}); |
| |
| /* TCP fastopen is required for the TCP tests */ |
| enable_fastopen(); |
| fprintf(stderr, "---- IPv4 TCP ----\n"); |
| test_reuseport_ebpf((struct test_params) { |
| .recv_family = AF_INET, |
| .send_family = AF_INET, |
| .protocol = SOCK_STREAM, |
| .recv_socks = 10, |
| .recv_port = 8008, |
| .send_port_min = 9120}); |
| test_reuseport_cbpf((struct test_params) { |
| .recv_family = AF_INET, |
| .send_family = AF_INET, |
| .protocol = SOCK_STREAM, |
| .recv_socks = 10, |
| .recv_port = 8009, |
| .send_port_min = 9160}); |
| test_extra_filter((struct test_params) { |
| .recv_family = AF_INET, |
| .protocol = SOCK_STREAM, |
| .recv_port = 8010}); |
| test_filter_no_reuseport((struct test_params) { |
| .recv_family = AF_INET, |
| .protocol = SOCK_STREAM, |
| .recv_port = 8011}); |
| |
| fprintf(stderr, "---- IPv6 TCP ----\n"); |
| test_reuseport_ebpf((struct test_params) { |
| .recv_family = AF_INET6, |
| .send_family = AF_INET6, |
| .protocol = SOCK_STREAM, |
| .recv_socks = 10, |
| .recv_port = 8012, |
| .send_port_min = 9200}); |
| test_reuseport_cbpf((struct test_params) { |
| .recv_family = AF_INET6, |
| .send_family = AF_INET6, |
| .protocol = SOCK_STREAM, |
| .recv_socks = 10, |
| .recv_port = 8013, |
| .send_port_min = 9240}); |
| test_extra_filter((struct test_params) { |
| .recv_family = AF_INET6, |
| .protocol = SOCK_STREAM, |
| .recv_port = 8014}); |
| test_filter_no_reuseport((struct test_params) { |
| .recv_family = AF_INET6, |
| .protocol = SOCK_STREAM, |
| .recv_port = 8015}); |
| |
| fprintf(stderr, "---- IPv6 TCP w/ mapped IPv4 ----\n"); |
| test_reuseport_ebpf((struct test_params) { |
| .recv_family = AF_INET6, |
| .send_family = AF_INET, |
| .protocol = SOCK_STREAM, |
| .recv_socks = 10, |
| .recv_port = 8016, |
| .send_port_min = 9320}); |
| test_reuseport_cbpf((struct test_params) { |
| .recv_family = AF_INET6, |
| .send_family = AF_INET, |
| .protocol = SOCK_STREAM, |
| .recv_socks = 10, |
| .recv_port = 8017, |
| .send_port_min = 9360}); |
| |
| test_filter_without_bind(); |
| |
| fprintf(stderr, "SUCCESS\n"); |
| return 0; |
| } |