| /* |
| * ldt_gdt.c - Test cases for LDT and GDT access |
| * Copyright (c) 2015 Andrew Lutomirski |
| */ |
| |
| #define _GNU_SOURCE |
| #include <err.h> |
| #include <stdio.h> |
| #include <stdint.h> |
| #include <signal.h> |
| #include <setjmp.h> |
| #include <stdlib.h> |
| #include <string.h> |
| #include <errno.h> |
| #include <unistd.h> |
| #include <sys/syscall.h> |
| #include <asm/ldt.h> |
| #include <sys/types.h> |
| #include <sys/wait.h> |
| #include <stdbool.h> |
| #include <pthread.h> |
| #include <sched.h> |
| #include <linux/futex.h> |
| #include <sys/mman.h> |
| #include <asm/prctl.h> |
| #include <sys/prctl.h> |
| |
| #define AR_ACCESSED (1<<8) |
| |
| #define AR_TYPE_RODATA (0 * (1<<9)) |
| #define AR_TYPE_RWDATA (1 * (1<<9)) |
| #define AR_TYPE_RODATA_EXPDOWN (2 * (1<<9)) |
| #define AR_TYPE_RWDATA_EXPDOWN (3 * (1<<9)) |
| #define AR_TYPE_XOCODE (4 * (1<<9)) |
| #define AR_TYPE_XRCODE (5 * (1<<9)) |
| #define AR_TYPE_XOCODE_CONF (6 * (1<<9)) |
| #define AR_TYPE_XRCODE_CONF (7 * (1<<9)) |
| |
| #define AR_DPL3 (3 * (1<<13)) |
| |
| #define AR_S (1 << 12) |
| #define AR_P (1 << 15) |
| #define AR_AVL (1 << 20) |
| #define AR_L (1 << 21) |
| #define AR_DB (1 << 22) |
| #define AR_G (1 << 23) |
| |
| #ifdef __x86_64__ |
| # define INT80_CLOBBERS "r8", "r9", "r10", "r11" |
| #else |
| # define INT80_CLOBBERS |
| #endif |
| |
| static int nerrs; |
| |
| /* Points to an array of 1024 ints, each holding its own index. */ |
| static const unsigned int *counter_page; |
| static struct user_desc *low_user_desc; |
| static struct user_desc *low_user_desc_clear; /* Use to delete GDT entry */ |
| static int gdt_entry_num; |
| |
| static void check_invalid_segment(uint16_t index, int ldt) |
| { |
| uint32_t has_limit = 0, has_ar = 0, limit, ar; |
| uint32_t selector = (index << 3) | (ldt << 2) | 3; |
| |
| asm ("lsl %[selector], %[limit]\n\t" |
| "jnz 1f\n\t" |
| "movl $1, %[has_limit]\n\t" |
| "1:" |
| : [limit] "=r" (limit), [has_limit] "+rm" (has_limit) |
| : [selector] "r" (selector)); |
| asm ("larl %[selector], %[ar]\n\t" |
| "jnz 1f\n\t" |
| "movl $1, %[has_ar]\n\t" |
| "1:" |
| : [ar] "=r" (ar), [has_ar] "+rm" (has_ar) |
| : [selector] "r" (selector)); |
| |
| if (has_limit || has_ar) { |
| printf("[FAIL]\t%s entry %hu is valid but should be invalid\n", |
| (ldt ? "LDT" : "GDT"), index); |
| nerrs++; |
| } else { |
| printf("[OK]\t%s entry %hu is invalid\n", |
| (ldt ? "LDT" : "GDT"), index); |
| } |
| } |
| |
| static void check_valid_segment(uint16_t index, int ldt, |
| uint32_t expected_ar, uint32_t expected_limit, |
| bool verbose) |
| { |
| uint32_t has_limit = 0, has_ar = 0, limit, ar; |
| uint32_t selector = (index << 3) | (ldt << 2) | 3; |
| |
| asm ("lsl %[selector], %[limit]\n\t" |
| "jnz 1f\n\t" |
| "movl $1, %[has_limit]\n\t" |
| "1:" |
| : [limit] "=r" (limit), [has_limit] "+rm" (has_limit) |
| : [selector] "r" (selector)); |
| asm ("larl %[selector], %[ar]\n\t" |
| "jnz 1f\n\t" |
| "movl $1, %[has_ar]\n\t" |
| "1:" |
| : [ar] "=r" (ar), [has_ar] "+rm" (has_ar) |
| : [selector] "r" (selector)); |
| |
| if (!has_limit || !has_ar) { |
| printf("[FAIL]\t%s entry %hu is invalid but should be valid\n", |
| (ldt ? "LDT" : "GDT"), index); |
| nerrs++; |
| return; |
| } |
| |
| if (ar != expected_ar) { |
| printf("[FAIL]\t%s entry %hu has AR 0x%08X but expected 0x%08X\n", |
| (ldt ? "LDT" : "GDT"), index, ar, expected_ar); |
| nerrs++; |
| } else if (limit != expected_limit) { |
| printf("[FAIL]\t%s entry %hu has limit 0x%08X but expected 0x%08X\n", |
| (ldt ? "LDT" : "GDT"), index, limit, expected_limit); |
| nerrs++; |
| } else if (verbose) { |
| printf("[OK]\t%s entry %hu has AR 0x%08X and limit 0x%08X\n", |
| (ldt ? "LDT" : "GDT"), index, ar, limit); |
| } |
| } |
| |
| static bool install_valid_mode(const struct user_desc *desc, uint32_t ar, |
| bool oldmode) |
| { |
| int ret = syscall(SYS_modify_ldt, oldmode ? 1 : 0x11, |
| desc, sizeof(*desc)); |
| if (ret < -1) |
| errno = -ret; |
| if (ret == 0) { |
| uint32_t limit = desc->limit; |
| if (desc->limit_in_pages) |
| limit = (limit << 12) + 4095; |
| check_valid_segment(desc->entry_number, 1, ar, limit, true); |
| return true; |
| } else if (errno == ENOSYS) { |
| printf("[OK]\tmodify_ldt returned -ENOSYS\n"); |
| return false; |
| } else { |
| if (desc->seg_32bit) { |
| printf("[FAIL]\tUnexpected modify_ldt failure %d\n", |
| errno); |
| nerrs++; |
| return false; |
| } else { |
| printf("[OK]\tmodify_ldt rejected 16 bit segment\n"); |
| return false; |
| } |
| } |
| } |
| |
| static bool install_valid(const struct user_desc *desc, uint32_t ar) |
| { |
| return install_valid_mode(desc, ar, false); |
| } |
| |
| static void install_invalid(const struct user_desc *desc, bool oldmode) |
| { |
| int ret = syscall(SYS_modify_ldt, oldmode ? 1 : 0x11, |
| desc, sizeof(*desc)); |
| if (ret < -1) |
| errno = -ret; |
| if (ret == 0) { |
| check_invalid_segment(desc->entry_number, 1); |
| } else if (errno == ENOSYS) { |
| printf("[OK]\tmodify_ldt returned -ENOSYS\n"); |
| } else { |
| if (desc->seg_32bit) { |
| printf("[FAIL]\tUnexpected modify_ldt failure %d\n", |
| errno); |
| nerrs++; |
| } else { |
| printf("[OK]\tmodify_ldt rejected 16 bit segment\n"); |
| } |
| } |
| } |
| |
| static int safe_modify_ldt(int func, struct user_desc *ptr, |
| unsigned long bytecount) |
| { |
| int ret = syscall(SYS_modify_ldt, 0x11, ptr, bytecount); |
| if (ret < -1) |
| errno = -ret; |
| return ret; |
| } |
| |
| static void fail_install(struct user_desc *desc) |
| { |
| if (safe_modify_ldt(0x11, desc, sizeof(*desc)) == 0) { |
| printf("[FAIL]\tmodify_ldt accepted a bad descriptor\n"); |
| nerrs++; |
| } else if (errno == ENOSYS) { |
| printf("[OK]\tmodify_ldt returned -ENOSYS\n"); |
| } else { |
| printf("[OK]\tmodify_ldt failure %d\n", errno); |
| } |
| } |
| |
| static void do_simple_tests(void) |
| { |
| struct user_desc desc = { |
| .entry_number = 0, |
| .base_addr = 0, |
| .limit = 10, |
| .seg_32bit = 1, |
| .contents = 2, /* Code, not conforming */ |
| .read_exec_only = 0, |
| .limit_in_pages = 0, |
| .seg_not_present = 0, |
| .useable = 0 |
| }; |
| install_valid(&desc, AR_DPL3 | AR_TYPE_XRCODE | AR_S | AR_P | AR_DB); |
| |
| desc.limit_in_pages = 1; |
| install_valid(&desc, AR_DPL3 | AR_TYPE_XRCODE | |
| AR_S | AR_P | AR_DB | AR_G); |
| |
| check_invalid_segment(1, 1); |
| |
| desc.entry_number = 2; |
| install_valid(&desc, AR_DPL3 | AR_TYPE_XRCODE | |
| AR_S | AR_P | AR_DB | AR_G); |
| |
| check_invalid_segment(1, 1); |
| |
| desc.base_addr = 0xf0000000; |
| install_valid(&desc, AR_DPL3 | AR_TYPE_XRCODE | |
| AR_S | AR_P | AR_DB | AR_G); |
| |
| desc.useable = 1; |
| install_valid(&desc, AR_DPL3 | AR_TYPE_XRCODE | |
| AR_S | AR_P | AR_DB | AR_G | AR_AVL); |
| |
| desc.seg_not_present = 1; |
| install_valid(&desc, AR_DPL3 | AR_TYPE_XRCODE | |
| AR_S | AR_DB | AR_G | AR_AVL); |
| |
| desc.seg_32bit = 0; |
| install_valid(&desc, AR_DPL3 | AR_TYPE_XRCODE | |
| AR_S | AR_G | AR_AVL); |
| |
| desc.seg_32bit = 1; |
| desc.contents = 0; |
| install_valid(&desc, AR_DPL3 | AR_TYPE_RWDATA | |
| AR_S | AR_DB | AR_G | AR_AVL); |
| |
| desc.read_exec_only = 1; |
| install_valid(&desc, AR_DPL3 | AR_TYPE_RODATA | |
| AR_S | AR_DB | AR_G | AR_AVL); |
| |
| desc.contents = 1; |
| install_valid(&desc, AR_DPL3 | AR_TYPE_RODATA_EXPDOWN | |
| AR_S | AR_DB | AR_G | AR_AVL); |
| |
| desc.read_exec_only = 0; |
| desc.limit_in_pages = 0; |
| install_valid(&desc, AR_DPL3 | AR_TYPE_RWDATA_EXPDOWN | |
| AR_S | AR_DB | AR_AVL); |
| |
| desc.contents = 3; |
| install_valid(&desc, AR_DPL3 | AR_TYPE_XRCODE_CONF | |
| AR_S | AR_DB | AR_AVL); |
| |
| desc.read_exec_only = 1; |
| install_valid(&desc, AR_DPL3 | AR_TYPE_XOCODE_CONF | |
| AR_S | AR_DB | AR_AVL); |
| |
| desc.read_exec_only = 0; |
| desc.contents = 2; |
| install_valid(&desc, AR_DPL3 | AR_TYPE_XRCODE | |
| AR_S | AR_DB | AR_AVL); |
| |
| desc.read_exec_only = 1; |
| |
| #ifdef __x86_64__ |
| desc.lm = 1; |
| install_valid(&desc, AR_DPL3 | AR_TYPE_XOCODE | |
| AR_S | AR_DB | AR_AVL); |
| desc.lm = 0; |
| #endif |
| |
| bool entry1_okay = install_valid(&desc, AR_DPL3 | AR_TYPE_XOCODE | |
| AR_S | AR_DB | AR_AVL); |
| |
| if (entry1_okay) { |
| printf("[RUN]\tTest fork\n"); |
| pid_t child = fork(); |
| if (child == 0) { |
| nerrs = 0; |
| check_valid_segment(desc.entry_number, 1, |
| AR_DPL3 | AR_TYPE_XOCODE | |
| AR_S | AR_DB | AR_AVL, desc.limit, |
| true); |
| check_invalid_segment(1, 1); |
| exit(nerrs ? 1 : 0); |
| } else { |
| int status; |
| if (waitpid(child, &status, 0) != child || |
| !WIFEXITED(status)) { |
| printf("[FAIL]\tChild died\n"); |
| nerrs++; |
| } else if (WEXITSTATUS(status) != 0) { |
| printf("[FAIL]\tChild failed\n"); |
| nerrs++; |
| } else { |
| printf("[OK]\tChild succeeded\n"); |
| } |
| } |
| |
| printf("[RUN]\tTest size\n"); |
| int i; |
| for (i = 0; i < 8192; i++) { |
| desc.entry_number = i; |
| desc.limit = i; |
| if (safe_modify_ldt(0x11, &desc, sizeof(desc)) != 0) { |
| printf("[FAIL]\tFailed to install entry %d\n", i); |
| nerrs++; |
| break; |
| } |
| } |
| for (int j = 0; j < i; j++) { |
| check_valid_segment(j, 1, AR_DPL3 | AR_TYPE_XOCODE | |
| AR_S | AR_DB | AR_AVL, j, false); |
| } |
| printf("[DONE]\tSize test\n"); |
| } else { |
| printf("[SKIP]\tSkipping fork and size tests because we have no LDT\n"); |
| } |
| |
| /* Test entry_number too high. */ |
| desc.entry_number = 8192; |
| fail_install(&desc); |
| |
| /* Test deletion and actions mistakeable for deletion. */ |
| memset(&desc, 0, sizeof(desc)); |
| install_valid(&desc, AR_DPL3 | AR_TYPE_RWDATA | AR_S | AR_P); |
| |
| desc.seg_not_present = 1; |
| install_valid(&desc, AR_DPL3 | AR_TYPE_RWDATA | AR_S); |
| |
| desc.seg_not_present = 0; |
| desc.read_exec_only = 1; |
| install_valid(&desc, AR_DPL3 | AR_TYPE_RODATA | AR_S | AR_P); |
| |
| desc.read_exec_only = 0; |
| desc.seg_not_present = 1; |
| install_valid(&desc, AR_DPL3 | AR_TYPE_RWDATA | AR_S); |
| |
| desc.read_exec_only = 1; |
| desc.limit = 1; |
| install_valid(&desc, AR_DPL3 | AR_TYPE_RODATA | AR_S); |
| |
| desc.limit = 0; |
| desc.base_addr = 1; |
| install_valid(&desc, AR_DPL3 | AR_TYPE_RODATA | AR_S); |
| |
| desc.base_addr = 0; |
| install_invalid(&desc, false); |
| |
| desc.seg_not_present = 0; |
| desc.read_exec_only = 0; |
| desc.seg_32bit = 1; |
| install_valid(&desc, AR_DPL3 | AR_TYPE_RWDATA | AR_S | AR_P | AR_DB); |
| install_invalid(&desc, true); |
| } |
| |
| /* |
| * 0: thread is idle |
| * 1: thread armed |
| * 2: thread should clear LDT entry 0 |
| * 3: thread should exit |
| */ |
| static volatile unsigned int ftx; |
| |
| static void *threadproc(void *ctx) |
| { |
| cpu_set_t cpuset; |
| CPU_ZERO(&cpuset); |
| CPU_SET(1, &cpuset); |
| if (sched_setaffinity(0, sizeof(cpuset), &cpuset) != 0) |
| err(1, "sched_setaffinity to CPU 1"); /* should never fail */ |
| |
| while (1) { |
| syscall(SYS_futex, &ftx, FUTEX_WAIT, 0, NULL, NULL, 0); |
| while (ftx != 2) { |
| if (ftx >= 3) |
| return NULL; |
| } |
| |
| /* clear LDT entry 0 */ |
| const struct user_desc desc = {}; |
| if (syscall(SYS_modify_ldt, 1, &desc, sizeof(desc)) != 0) |
| err(1, "modify_ldt"); |
| |
| /* If ftx == 2, set it to zero. If ftx == 100, quit. */ |
| unsigned int x = -2; |
| asm volatile ("lock xaddl %[x], %[ftx]" : |
| [x] "+r" (x), [ftx] "+m" (ftx)); |
| if (x != 2) |
| return NULL; |
| } |
| } |
| |
| #ifdef __i386__ |
| |
| #ifndef SA_RESTORE |
| #define SA_RESTORER 0x04000000 |
| #endif |
| |
| /* |
| * The UAPI header calls this 'struct sigaction', which conflicts with |
| * glibc. Sigh. |
| */ |
| struct fake_ksigaction { |
| void *handler; /* the real type is nasty */ |
| unsigned long sa_flags; |
| void (*sa_restorer)(void); |
| unsigned char sigset[8]; |
| }; |
| |
| static void fix_sa_restorer(int sig) |
| { |
| struct fake_ksigaction ksa; |
| |
| if (syscall(SYS_rt_sigaction, sig, NULL, &ksa, 8) == 0) { |
| /* |
| * glibc has a nasty bug: it sometimes writes garbage to |
| * sa_restorer. This interacts quite badly with anything |
| * that fiddles with SS because it can trigger legacy |
| * stack switching. Patch it up. See: |
| * |
| * https://sourceware.org/bugzilla/show_bug.cgi?id=21269 |
| */ |
| if (!(ksa.sa_flags & SA_RESTORER) && ksa.sa_restorer) { |
| ksa.sa_restorer = NULL; |
| if (syscall(SYS_rt_sigaction, sig, &ksa, NULL, |
| sizeof(ksa.sigset)) != 0) |
| err(1, "rt_sigaction"); |
| } |
| } |
| } |
| #else |
| static void fix_sa_restorer(int sig) |
| { |
| /* 64-bit glibc works fine. */ |
| } |
| #endif |
| |
| static void sethandler(int sig, void (*handler)(int, siginfo_t *, void *), |
| int flags) |
| { |
| struct sigaction sa; |
| memset(&sa, 0, sizeof(sa)); |
| sa.sa_sigaction = handler; |
| sa.sa_flags = SA_SIGINFO | flags; |
| sigemptyset(&sa.sa_mask); |
| if (sigaction(sig, &sa, 0)) |
| err(1, "sigaction"); |
| |
| fix_sa_restorer(sig); |
| } |
| |
| static jmp_buf jmpbuf; |
| |
| static void sigsegv(int sig, siginfo_t *info, void *ctx_void) |
| { |
| siglongjmp(jmpbuf, 1); |
| } |
| |
| static void do_multicpu_tests(void) |
| { |
| cpu_set_t cpuset; |
| pthread_t thread; |
| int failures = 0, iters = 5, i; |
| unsigned short orig_ss; |
| |
| CPU_ZERO(&cpuset); |
| CPU_SET(1, &cpuset); |
| if (sched_setaffinity(0, sizeof(cpuset), &cpuset) != 0) { |
| printf("[SKIP]\tCannot set affinity to CPU 1\n"); |
| return; |
| } |
| |
| CPU_ZERO(&cpuset); |
| CPU_SET(0, &cpuset); |
| if (sched_setaffinity(0, sizeof(cpuset), &cpuset) != 0) { |
| printf("[SKIP]\tCannot set affinity to CPU 0\n"); |
| return; |
| } |
| |
| sethandler(SIGSEGV, sigsegv, 0); |
| #ifdef __i386__ |
| /* True 32-bit kernels send SIGILL instead of SIGSEGV on IRET faults. */ |
| sethandler(SIGILL, sigsegv, 0); |
| #endif |
| |
| printf("[RUN]\tCross-CPU LDT invalidation\n"); |
| |
| if (pthread_create(&thread, 0, threadproc, 0) != 0) |
| err(1, "pthread_create"); |
| |
| asm volatile ("mov %%ss, %0" : "=rm" (orig_ss)); |
| |
| for (i = 0; i < 5; i++) { |
| if (sigsetjmp(jmpbuf, 1) != 0) |
| continue; |
| |
| /* Make sure the thread is ready after the last test. */ |
| while (ftx != 0) |
| ; |
| |
| struct user_desc desc = { |
| .entry_number = 0, |
| .base_addr = 0, |
| .limit = 0xfffff, |
| .seg_32bit = 1, |
| .contents = 0, /* Data */ |
| .read_exec_only = 0, |
| .limit_in_pages = 1, |
| .seg_not_present = 0, |
| .useable = 0 |
| }; |
| |
| if (safe_modify_ldt(0x11, &desc, sizeof(desc)) != 0) { |
| if (errno != ENOSYS) |
| err(1, "modify_ldt"); |
| printf("[SKIP]\tmodify_ldt unavailable\n"); |
| break; |
| } |
| |
| /* Arm the thread. */ |
| ftx = 1; |
| syscall(SYS_futex, &ftx, FUTEX_WAKE, 0, NULL, NULL, 0); |
| |
| asm volatile ("mov %0, %%ss" : : "r" (0x7)); |
| |
| /* Go! */ |
| ftx = 2; |
| |
| while (ftx != 0) |
| ; |
| |
| /* |
| * On success, modify_ldt will segfault us synchronously, |
| * and we'll escape via siglongjmp. |
| */ |
| |
| failures++; |
| asm volatile ("mov %0, %%ss" : : "rm" (orig_ss)); |
| }; |
| |
| ftx = 100; /* Kill the thread. */ |
| syscall(SYS_futex, &ftx, FUTEX_WAKE, 0, NULL, NULL, 0); |
| |
| if (pthread_join(thread, NULL) != 0) |
| err(1, "pthread_join"); |
| |
| if (failures) { |
| printf("[FAIL]\t%d of %d iterations failed\n", failures, iters); |
| nerrs++; |
| } else { |
| printf("[OK]\tAll %d iterations succeeded\n", iters); |
| } |
| } |
| |
| static int finish_exec_test(void) |
| { |
| /* |
| * In a sensible world, this would be check_invalid_segment(0, 1); |
| * For better or for worse, though, the LDT is inherited across exec. |
| * We can probably change this safely, but for now we test it. |
| */ |
| check_valid_segment(0, 1, |
| AR_DPL3 | AR_TYPE_XRCODE | AR_S | AR_P | AR_DB, |
| 42, true); |
| |
| return nerrs ? 1 : 0; |
| } |
| |
| static void do_exec_test(void) |
| { |
| printf("[RUN]\tTest exec\n"); |
| |
| struct user_desc desc = { |
| .entry_number = 0, |
| .base_addr = 0, |
| .limit = 42, |
| .seg_32bit = 1, |
| .contents = 2, /* Code, not conforming */ |
| .read_exec_only = 0, |
| .limit_in_pages = 0, |
| .seg_not_present = 0, |
| .useable = 0 |
| }; |
| install_valid(&desc, AR_DPL3 | AR_TYPE_XRCODE | AR_S | AR_P | AR_DB); |
| |
| pid_t child = fork(); |
| if (child == 0) { |
| execl("/proc/self/exe", "ldt_gdt_test_exec", NULL); |
| printf("[FAIL]\tCould not exec self\n"); |
| exit(1); /* exec failed */ |
| } else { |
| int status; |
| if (waitpid(child, &status, 0) != child || |
| !WIFEXITED(status)) { |
| printf("[FAIL]\tChild died\n"); |
| nerrs++; |
| } else if (WEXITSTATUS(status) != 0) { |
| printf("[FAIL]\tChild failed\n"); |
| nerrs++; |
| } else { |
| printf("[OK]\tChild succeeded\n"); |
| } |
| } |
| } |
| |
| static void setup_counter_page(void) |
| { |
| unsigned int *page = mmap(NULL, 4096, PROT_READ | PROT_WRITE, |
| MAP_ANONYMOUS | MAP_PRIVATE | MAP_32BIT, -1, 0); |
| if (page == MAP_FAILED) |
| err(1, "mmap"); |
| |
| for (int i = 0; i < 1024; i++) |
| page[i] = i; |
| counter_page = page; |
| } |
| |
| static int invoke_set_thread_area(void) |
| { |
| int ret; |
| asm volatile ("int $0x80" |
| : "=a" (ret), "+m" (low_user_desc) : |
| "a" (243), "b" (low_user_desc) |
| : INT80_CLOBBERS); |
| return ret; |
| } |
| |
| static void setup_low_user_desc(void) |
| { |
| low_user_desc = mmap(NULL, 2 * sizeof(struct user_desc), |
| PROT_READ | PROT_WRITE, |
| MAP_ANONYMOUS | MAP_PRIVATE | MAP_32BIT, -1, 0); |
| if (low_user_desc == MAP_FAILED) |
| err(1, "mmap"); |
| |
| low_user_desc->entry_number = -1; |
| low_user_desc->base_addr = (unsigned long)&counter_page[1]; |
| low_user_desc->limit = 0xfffff; |
| low_user_desc->seg_32bit = 1; |
| low_user_desc->contents = 0; /* Data, grow-up*/ |
| low_user_desc->read_exec_only = 0; |
| low_user_desc->limit_in_pages = 1; |
| low_user_desc->seg_not_present = 0; |
| low_user_desc->useable = 0; |
| |
| if (invoke_set_thread_area() == 0) { |
| gdt_entry_num = low_user_desc->entry_number; |
| printf("[NOTE]\tset_thread_area is available; will use GDT index %d\n", gdt_entry_num); |
| } else { |
| printf("[NOTE]\tset_thread_area is unavailable\n"); |
| } |
| |
| low_user_desc_clear = low_user_desc + 1; |
| low_user_desc_clear->entry_number = gdt_entry_num; |
| low_user_desc_clear->read_exec_only = 1; |
| low_user_desc_clear->seg_not_present = 1; |
| } |
| |
| static void test_gdt_invalidation(void) |
| { |
| if (!gdt_entry_num) |
| return; /* 64-bit only system -- we can't use set_thread_area */ |
| |
| unsigned short prev_sel; |
| unsigned short sel; |
| unsigned int eax; |
| const char *result; |
| #ifdef __x86_64__ |
| unsigned long saved_base; |
| unsigned long new_base; |
| #endif |
| |
| /* Test DS */ |
| invoke_set_thread_area(); |
| eax = 243; |
| sel = (gdt_entry_num << 3) | 3; |
| asm volatile ("movw %%ds, %[prev_sel]\n\t" |
| "movw %[sel], %%ds\n\t" |
| #ifdef __i386__ |
| "pushl %%ebx\n\t" |
| #endif |
| "movl %[arg1], %%ebx\n\t" |
| "int $0x80\n\t" /* Should invalidate ds */ |
| #ifdef __i386__ |
| "popl %%ebx\n\t" |
| #endif |
| "movw %%ds, %[sel]\n\t" |
| "movw %[prev_sel], %%ds" |
| : [prev_sel] "=&r" (prev_sel), [sel] "+r" (sel), |
| "+a" (eax) |
| : "m" (low_user_desc_clear), |
| [arg1] "r" ((unsigned int)(unsigned long)low_user_desc_clear) |
| : INT80_CLOBBERS); |
| |
| if (sel != 0) { |
| result = "FAIL"; |
| nerrs++; |
| } else { |
| result = "OK"; |
| } |
| printf("[%s]\tInvalidate DS with set_thread_area: new DS = 0x%hx\n", |
| result, sel); |
| |
| /* Test ES */ |
| invoke_set_thread_area(); |
| eax = 243; |
| sel = (gdt_entry_num << 3) | 3; |
| asm volatile ("movw %%es, %[prev_sel]\n\t" |
| "movw %[sel], %%es\n\t" |
| #ifdef __i386__ |
| "pushl %%ebx\n\t" |
| #endif |
| "movl %[arg1], %%ebx\n\t" |
| "int $0x80\n\t" /* Should invalidate es */ |
| #ifdef __i386__ |
| "popl %%ebx\n\t" |
| #endif |
| "movw %%es, %[sel]\n\t" |
| "movw %[prev_sel], %%es" |
| : [prev_sel] "=&r" (prev_sel), [sel] "+r" (sel), |
| "+a" (eax) |
| : "m" (low_user_desc_clear), |
| [arg1] "r" ((unsigned int)(unsigned long)low_user_desc_clear) |
| : INT80_CLOBBERS); |
| |
| if (sel != 0) { |
| result = "FAIL"; |
| nerrs++; |
| } else { |
| result = "OK"; |
| } |
| printf("[%s]\tInvalidate ES with set_thread_area: new ES = 0x%hx\n", |
| result, sel); |
| |
| /* Test FS */ |
| invoke_set_thread_area(); |
| eax = 243; |
| sel = (gdt_entry_num << 3) | 3; |
| #ifdef __x86_64__ |
| syscall(SYS_arch_prctl, ARCH_GET_FS, &saved_base); |
| #endif |
| asm volatile ("movw %%fs, %[prev_sel]\n\t" |
| "movw %[sel], %%fs\n\t" |
| #ifdef __i386__ |
| "pushl %%ebx\n\t" |
| #endif |
| "movl %[arg1], %%ebx\n\t" |
| "int $0x80\n\t" /* Should invalidate fs */ |
| #ifdef __i386__ |
| "popl %%ebx\n\t" |
| #endif |
| "movw %%fs, %[sel]\n\t" |
| : [prev_sel] "=&r" (prev_sel), [sel] "+r" (sel), |
| "+a" (eax) |
| : "m" (low_user_desc_clear), |
| [arg1] "r" ((unsigned int)(unsigned long)low_user_desc_clear) |
| : INT80_CLOBBERS); |
| |
| #ifdef __x86_64__ |
| syscall(SYS_arch_prctl, ARCH_GET_FS, &new_base); |
| #endif |
| |
| /* Restore FS/BASE for glibc */ |
| asm volatile ("movw %[prev_sel], %%fs" : : [prev_sel] "rm" (prev_sel)); |
| #ifdef __x86_64__ |
| if (saved_base) |
| syscall(SYS_arch_prctl, ARCH_SET_FS, saved_base); |
| #endif |
| |
| if (sel != 0) { |
| result = "FAIL"; |
| nerrs++; |
| } else { |
| result = "OK"; |
| } |
| printf("[%s]\tInvalidate FS with set_thread_area: new FS = 0x%hx\n", |
| result, sel); |
| |
| #ifdef __x86_64__ |
| if (sel == 0 && new_base != 0) { |
| nerrs++; |
| printf("[FAIL]\tNew FSBASE was 0x%lx\n", new_base); |
| } else { |
| printf("[OK]\tNew FSBASE was zero\n"); |
| } |
| #endif |
| |
| /* Test GS */ |
| invoke_set_thread_area(); |
| eax = 243; |
| sel = (gdt_entry_num << 3) | 3; |
| #ifdef __x86_64__ |
| syscall(SYS_arch_prctl, ARCH_GET_GS, &saved_base); |
| #endif |
| asm volatile ("movw %%gs, %[prev_sel]\n\t" |
| "movw %[sel], %%gs\n\t" |
| #ifdef __i386__ |
| "pushl %%ebx\n\t" |
| #endif |
| "movl %[arg1], %%ebx\n\t" |
| "int $0x80\n\t" /* Should invalidate gs */ |
| #ifdef __i386__ |
| "popl %%ebx\n\t" |
| #endif |
| "movw %%gs, %[sel]\n\t" |
| : [prev_sel] "=&r" (prev_sel), [sel] "+r" (sel), |
| "+a" (eax) |
| : "m" (low_user_desc_clear), |
| [arg1] "r" ((unsigned int)(unsigned long)low_user_desc_clear) |
| : INT80_CLOBBERS); |
| |
| #ifdef __x86_64__ |
| syscall(SYS_arch_prctl, ARCH_GET_GS, &new_base); |
| #endif |
| |
| /* Restore GS/BASE for glibc */ |
| asm volatile ("movw %[prev_sel], %%gs" : : [prev_sel] "rm" (prev_sel)); |
| #ifdef __x86_64__ |
| if (saved_base) |
| syscall(SYS_arch_prctl, ARCH_SET_GS, saved_base); |
| #endif |
| |
| if (sel != 0) { |
| result = "FAIL"; |
| nerrs++; |
| } else { |
| result = "OK"; |
| } |
| printf("[%s]\tInvalidate GS with set_thread_area: new GS = 0x%hx\n", |
| result, sel); |
| |
| #ifdef __x86_64__ |
| if (sel == 0 && new_base != 0) { |
| nerrs++; |
| printf("[FAIL]\tNew GSBASE was 0x%lx\n", new_base); |
| } else { |
| printf("[OK]\tNew GSBASE was zero\n"); |
| } |
| #endif |
| } |
| |
| int main(int argc, char **argv) |
| { |
| if (argc == 1 && !strcmp(argv[0], "ldt_gdt_test_exec")) |
| return finish_exec_test(); |
| |
| setup_counter_page(); |
| setup_low_user_desc(); |
| |
| do_simple_tests(); |
| |
| do_multicpu_tests(); |
| |
| do_exec_test(); |
| |
| test_gdt_invalidation(); |
| |
| return nerrs ? 1 : 0; |
| } |