| /* |
| * linux/drivers/mmc/host/sdhci_f_sdh30.c |
| * |
| * Copyright (C) 2013 - 2015 Fujitsu Semiconductor, Ltd |
| * Vincent Yang <vincent.yang@tw.fujitsu.com> |
| * Copyright (C) 2015 Linaro Ltd Andy Green <andy.green@linaro.org> |
| * |
| * This program is free software: you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation, version 2 of the License. |
| */ |
| |
| #include <linux/err.h> |
| #include <linux/delay.h> |
| #include <linux/module.h> |
| #include <linux/clk.h> |
| |
| #include "sdhci-pltfm.h" |
| |
| /* F_SDH30 extended Controller registers */ |
| #define F_SDH30_AHB_CONFIG 0x100 |
| #define F_SDH30_AHB_BIGED 0x00000040 |
| #define F_SDH30_BUSLOCK_DMA 0x00000020 |
| #define F_SDH30_BUSLOCK_EN 0x00000010 |
| #define F_SDH30_SIN 0x00000008 |
| #define F_SDH30_AHB_INCR_16 0x00000004 |
| #define F_SDH30_AHB_INCR_8 0x00000002 |
| #define F_SDH30_AHB_INCR_4 0x00000001 |
| |
| #define F_SDH30_TUNING_SETTING 0x108 |
| #define F_SDH30_CMD_CHK_DIS 0x00010000 |
| |
| #define F_SDH30_IO_CONTROL2 0x114 |
| #define F_SDH30_CRES_O_DN 0x00080000 |
| #define F_SDH30_MSEL_O_1_8 0x00040000 |
| |
| #define F_SDH30_ESD_CONTROL 0x124 |
| #define F_SDH30_EMMC_RST 0x00000002 |
| #define F_SDH30_EMMC_HS200 0x01000000 |
| |
| #define F_SDH30_CMD_DAT_DELAY 0x200 |
| |
| #define F_SDH30_MIN_CLOCK 400000 |
| |
| struct f_sdhost_priv { |
| struct clk *clk_iface; |
| struct clk *clk; |
| u32 vendor_hs200; |
| struct device *dev; |
| }; |
| |
| static void sdhci_f_sdh30_soft_voltage_switch(struct sdhci_host *host) |
| { |
| struct f_sdhost_priv *priv = sdhci_priv(host); |
| u32 ctrl = 0; |
| |
| usleep_range(2500, 3000); |
| ctrl = sdhci_readl(host, F_SDH30_IO_CONTROL2); |
| ctrl |= F_SDH30_CRES_O_DN; |
| sdhci_writel(host, ctrl, F_SDH30_IO_CONTROL2); |
| ctrl |= F_SDH30_MSEL_O_1_8; |
| sdhci_writel(host, ctrl, F_SDH30_IO_CONTROL2); |
| |
| ctrl &= ~F_SDH30_CRES_O_DN; |
| sdhci_writel(host, ctrl, F_SDH30_IO_CONTROL2); |
| usleep_range(2500, 3000); |
| |
| if (priv->vendor_hs200) { |
| dev_info(priv->dev, "%s: setting hs200\n", __func__); |
| ctrl = sdhci_readl(host, F_SDH30_ESD_CONTROL); |
| ctrl |= priv->vendor_hs200; |
| sdhci_writel(host, ctrl, F_SDH30_ESD_CONTROL); |
| } |
| |
| ctrl = sdhci_readl(host, F_SDH30_TUNING_SETTING); |
| ctrl |= F_SDH30_CMD_CHK_DIS; |
| sdhci_writel(host, ctrl, F_SDH30_TUNING_SETTING); |
| } |
| |
| static unsigned int sdhci_f_sdh30_get_min_clock(struct sdhci_host *host) |
| { |
| return F_SDH30_MIN_CLOCK; |
| } |
| |
| static void sdhci_f_sdh30_reset(struct sdhci_host *host, u8 mask) |
| { |
| if (sdhci_readw(host, SDHCI_CLOCK_CONTROL) == 0) |
| sdhci_writew(host, 0xBC01, SDHCI_CLOCK_CONTROL); |
| |
| sdhci_reset(host, mask); |
| } |
| |
| static const struct sdhci_ops sdhci_f_sdh30_ops = { |
| .voltage_switch = sdhci_f_sdh30_soft_voltage_switch, |
| .get_min_clock = sdhci_f_sdh30_get_min_clock, |
| .reset = sdhci_f_sdh30_reset, |
| .set_clock = sdhci_set_clock, |
| .set_bus_width = sdhci_set_bus_width, |
| .set_uhs_signaling = sdhci_set_uhs_signaling, |
| }; |
| |
| static int sdhci_f_sdh30_probe(struct platform_device *pdev) |
| { |
| struct sdhci_host *host; |
| struct device *dev = &pdev->dev; |
| struct resource *res; |
| int irq, ctrl = 0, ret = 0; |
| struct f_sdhost_priv *priv; |
| u32 reg = 0; |
| |
| irq = platform_get_irq(pdev, 0); |
| if (irq < 0) { |
| dev_err(dev, "%s: no irq specified\n", __func__); |
| return irq; |
| } |
| |
| host = sdhci_alloc_host(dev, sizeof(struct f_sdhost_priv)); |
| if (IS_ERR(host)) |
| return PTR_ERR(host); |
| |
| priv = sdhci_priv(host); |
| priv->dev = dev; |
| |
| host->quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC | |
| SDHCI_QUIRK_INVERTED_WRITE_PROTECT; |
| host->quirks2 = SDHCI_QUIRK2_SUPPORT_SINGLE | |
| SDHCI_QUIRK2_TUNING_WORK_AROUND; |
| |
| ret = mmc_of_parse(host->mmc); |
| if (ret) |
| goto err; |
| |
| platform_set_drvdata(pdev, host); |
| |
| sdhci_get_of_property(pdev); |
| host->hw_name = "f_sdh30"; |
| host->ops = &sdhci_f_sdh30_ops; |
| host->irq = irq; |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| host->ioaddr = devm_ioremap_resource(&pdev->dev, res); |
| if (IS_ERR(host->ioaddr)) { |
| ret = PTR_ERR(host->ioaddr); |
| goto err; |
| } |
| |
| priv->clk_iface = devm_clk_get(&pdev->dev, "iface"); |
| if (IS_ERR(priv->clk_iface)) { |
| ret = PTR_ERR(priv->clk_iface); |
| goto err; |
| } |
| |
| ret = clk_prepare_enable(priv->clk_iface); |
| if (ret) |
| goto err; |
| |
| priv->clk = devm_clk_get(&pdev->dev, "core"); |
| if (IS_ERR(priv->clk)) { |
| ret = PTR_ERR(priv->clk); |
| goto err_clk; |
| } |
| |
| ret = clk_prepare_enable(priv->clk); |
| if (ret) |
| goto err_clk; |
| |
| /* init vendor specific regs */ |
| ctrl = sdhci_readw(host, F_SDH30_AHB_CONFIG); |
| ctrl |= F_SDH30_SIN | F_SDH30_AHB_INCR_16 | F_SDH30_AHB_INCR_8 | |
| F_SDH30_AHB_INCR_4; |
| ctrl &= ~(F_SDH30_AHB_BIGED | F_SDH30_BUSLOCK_EN); |
| sdhci_writew(host, ctrl, F_SDH30_AHB_CONFIG); |
| |
| reg = sdhci_readl(host, F_SDH30_ESD_CONTROL); |
| sdhci_writel(host, reg & ~F_SDH30_EMMC_RST, F_SDH30_ESD_CONTROL); |
| msleep(20); |
| sdhci_writel(host, reg | F_SDH30_EMMC_RST, F_SDH30_ESD_CONTROL); |
| |
| reg = sdhci_readl(host, SDHCI_CAPABILITIES); |
| if (reg & SDHCI_CAN_DO_8BIT) |
| priv->vendor_hs200 = F_SDH30_EMMC_HS200; |
| |
| ret = sdhci_add_host(host); |
| if (ret) |
| goto err_add_host; |
| |
| return 0; |
| |
| err_add_host: |
| clk_disable_unprepare(priv->clk); |
| err_clk: |
| clk_disable_unprepare(priv->clk_iface); |
| err: |
| sdhci_free_host(host); |
| return ret; |
| } |
| |
| static int sdhci_f_sdh30_remove(struct platform_device *pdev) |
| { |
| struct sdhci_host *host = platform_get_drvdata(pdev); |
| struct f_sdhost_priv *priv = sdhci_priv(host); |
| |
| sdhci_remove_host(host, readl(host->ioaddr + SDHCI_INT_STATUS) == |
| 0xffffffff); |
| |
| clk_disable_unprepare(priv->clk_iface); |
| clk_disable_unprepare(priv->clk); |
| |
| sdhci_free_host(host); |
| platform_set_drvdata(pdev, NULL); |
| |
| return 0; |
| } |
| |
| static const struct of_device_id f_sdh30_dt_ids[] = { |
| { .compatible = "fujitsu,mb86s70-sdhci-3.0" }, |
| { /* sentinel */ } |
| }; |
| MODULE_DEVICE_TABLE(of, f_sdh30_dt_ids); |
| |
| static struct platform_driver sdhci_f_sdh30_driver = { |
| .driver = { |
| .name = "f_sdh30", |
| .of_match_table = f_sdh30_dt_ids, |
| .pm = &sdhci_pltfm_pmops, |
| }, |
| .probe = sdhci_f_sdh30_probe, |
| .remove = sdhci_f_sdh30_remove, |
| }; |
| |
| module_platform_driver(sdhci_f_sdh30_driver); |
| |
| MODULE_DESCRIPTION("F_SDH30 SD Card Controller driver"); |
| MODULE_LICENSE("GPL v2"); |
| MODULE_AUTHOR("FUJITSU SEMICONDUCTOR LTD."); |
| MODULE_ALIAS("platform:f_sdh30"); |