| /* | |
| * BSD LICENSE | |
| * | |
| * Copyright(c) 2016-2017 Broadcom. All rights reserved. | |
| * | |
| * Redistribution and use in source and binary forms, with or without | |
| * modification, are permitted provided that the following conditions | |
| * are met: | |
| * | |
| * * Redistributions of source code must retain the above copyright | |
| * notice, this list of conditions and the following disclaimer. | |
| * * Redistributions in binary form must reproduce the above copyright | |
| * notice, this list of conditions and the following disclaimer in | |
| * the documentation and/or other materials provided with the | |
| * distribution. | |
| * * Neither the name of Broadcom nor the names of its | |
| * contributors may be used to endorse or promote products derived | |
| * from this software without specific prior written permission. | |
| * | |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS | |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT | |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR | |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT | |
| * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, | |
| * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT | |
| * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, | |
| * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY | |
| * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT | |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE | |
| * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. | |
| */ | |
| sata { | |
| compatible = "simple-bus"; | |
| #address-cells = <1>; | |
| #size-cells = <1>; | |
| ranges = <0x0 0x0 0x67d00000 0x00800000>; | |
| sata0: ahci@00210000 { | |
| compatible = "brcm,iproc-ahci", "generic-ahci"; | |
| reg = <0x00210000 0x1000>; | |
| reg-names = "ahci"; | |
| interrupts = <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>; | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| status = "disabled"; | |
| sata0_port0: sata-port@0 { | |
| reg = <0>; | |
| phys = <&sata0_phy0>; | |
| phy-names = "sata-phy"; | |
| }; | |
| }; | |
| sata_phy0: sata_phy@00212100 { | |
| compatible = "brcm,iproc-sr-sata-phy"; | |
| reg = <0x00212100 0x1000>; | |
| reg-names = "phy"; | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| status = "disabled"; | |
| sata0_phy0: sata-phy@0 { | |
| reg = <0>; | |
| #phy-cells = <0>; | |
| }; | |
| }; | |
| sata1: ahci@00310000 { | |
| compatible = "brcm,iproc-ahci", "generic-ahci"; | |
| reg = <0x00310000 0x1000>; | |
| reg-names = "ahci"; | |
| interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>; | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| status = "disabled"; | |
| sata1_port0: sata-port@0 { | |
| reg = <0>; | |
| phys = <&sata1_phy0>; | |
| phy-names = "sata-phy"; | |
| }; | |
| }; | |
| sata_phy1: sata_phy@00312100 { | |
| compatible = "brcm,iproc-sr-sata-phy"; | |
| reg = <0x00312100 0x1000>; | |
| reg-names = "phy"; | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| status = "disabled"; | |
| sata1_phy0: sata-phy@0 { | |
| reg = <0>; | |
| #phy-cells = <0>; | |
| }; | |
| }; | |
| sata2: ahci@00120000 { | |
| compatible = "brcm,iproc-ahci", "generic-ahci"; | |
| reg = <0x00120000 0x1000>; | |
| reg-names = "ahci"; | |
| interrupts = <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>; | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| status = "disabled"; | |
| sata2_port0: sata-port@0 { | |
| reg = <0>; | |
| phys = <&sata2_phy0>; | |
| phy-names = "sata-phy"; | |
| }; | |
| }; | |
| sata_phy2: sata_phy@00122100 { | |
| compatible = "brcm,iproc-sr-sata-phy"; | |
| reg = <0x00122100 0x1000>; | |
| reg-names = "phy"; | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| status = "disabled"; | |
| sata2_phy0: sata-phy@0 { | |
| reg = <0>; | |
| #phy-cells = <0>; | |
| }; | |
| }; | |
| sata3: ahci@00130000 { | |
| compatible = "brcm,iproc-ahci", "generic-ahci"; | |
| reg = <0x00130000 0x1000>; | |
| reg-names = "ahci"; | |
| interrupts = <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>; | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| status = "disabled"; | |
| sata3_port0: sata-port@0 { | |
| reg = <0>; | |
| phys = <&sata3_phy0>; | |
| phy-names = "sata-phy"; | |
| }; | |
| }; | |
| sata_phy3: sata_phy@00132100 { | |
| compatible = "brcm,iproc-sr-sata-phy"; | |
| reg = <0x00132100 0x1000>; | |
| reg-names = "phy"; | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| status = "disabled"; | |
| sata3_phy0: sata-phy@0 { | |
| reg = <0>; | |
| #phy-cells = <0>; | |
| }; | |
| }; | |
| sata4: ahci@00330000 { | |
| compatible = "brcm,iproc-ahci", "generic-ahci"; | |
| reg = <0x00330000 0x1000>; | |
| reg-names = "ahci"; | |
| interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>; | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| status = "disabled"; | |
| sata4_port0: sata-port@0 { | |
| reg = <0>; | |
| phys = <&sata4_phy0>; | |
| phy-names = "sata-phy"; | |
| }; | |
| }; | |
| sata_phy4: sata_phy@00332100 { | |
| compatible = "brcm,iproc-sr-sata-phy"; | |
| reg = <0x00332100 0x1000>; | |
| reg-names = "phy"; | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| status = "disabled"; | |
| sata4_phy0: sata-phy@0 { | |
| reg = <0>; | |
| #phy-cells = <0>; | |
| }; | |
| }; | |
| sata5: ahci@00400000 { | |
| compatible = "brcm,iproc-ahci", "generic-ahci"; | |
| reg = <0x00400000 0x1000>; | |
| reg-names = "ahci"; | |
| interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| status = "disabled"; | |
| sata5_port0: sata-port@0 { | |
| reg = <0>; | |
| phys = <&sata5_phy0>; | |
| phy-names = "sata-phy"; | |
| }; | |
| }; | |
| sata_phy5: sata_phy@00402100 { | |
| compatible = "brcm,iproc-sr-sata-phy"; | |
| reg = <0x00402100 0x1000>; | |
| reg-names = "phy"; | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| status = "disabled"; | |
| sata5_phy0: sata-phy@0 { | |
| reg = <0>; | |
| #phy-cells = <0>; | |
| }; | |
| }; | |
| sata6: ahci@00410000 { | |
| compatible = "brcm,iproc-ahci", "generic-ahci"; | |
| reg = <0x00410000 0x1000>; | |
| reg-names = "ahci"; | |
| interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| status = "disabled"; | |
| sata6_port0: sata-port@0 { | |
| reg = <0>; | |
| phys = <&sata6_phy0>; | |
| phy-names = "sata-phy"; | |
| }; | |
| }; | |
| sata_phy6: sata_phy@00412100 { | |
| compatible = "brcm,iproc-sr-sata-phy"; | |
| reg = <0x00412100 0x1000>; | |
| reg-names = "phy"; | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| status = "disabled"; | |
| sata6_phy0: sata-phy@0 { | |
| reg = <0>; | |
| #phy-cells = <0>; | |
| }; | |
| }; | |
| sata7: ahci@00420000 { | |
| compatible = "brcm,iproc-ahci", "generic-ahci"; | |
| reg = <0x00420000 0x1000>; | |
| reg-names = "ahci"; | |
| interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| status = "disabled"; | |
| sata7_port0: sata-port@0 { | |
| reg = <0>; | |
| phys = <&sata7_phy0>; | |
| phy-names = "sata-phy"; | |
| }; | |
| }; | |
| sata_phy7: sata_phy@00422100 { | |
| compatible = "brcm,iproc-sr-sata-phy"; | |
| reg = <0x00422100 0x1000>; | |
| reg-names = "phy"; | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| status = "disabled"; | |
| sata7_phy0: sata-phy@0 { | |
| reg = <0>; | |
| #phy-cells = <0>; | |
| }; | |
| }; | |
| }; |