| /* |
| * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved. |
| * |
| * Authors: Shlomi Gridish <gridish@freescale.com> |
| * Li Yang <leoli@freescale.com> |
| * |
| * Description: |
| * QE UCC Fast API Set - UCC Fast specific routines implementations. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| */ |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/errno.h> |
| #include <linux/slab.h> |
| #include <linux/stddef.h> |
| #include <linux/interrupt.h> |
| #include <linux/err.h> |
| #include <linux/module.h> |
| |
| #include <asm/io.h> |
| #include <asm/immap_qe.h> |
| #include <asm/qe.h> |
| |
| #include <asm/ucc.h> |
| #include <asm/ucc_fast.h> |
| |
| void ucc_fast_dump_regs(struct ucc_fast_private * uccf) |
| { |
| printk(KERN_INFO "UCC%u Fast registers:\n", uccf->uf_info->ucc_num); |
| printk(KERN_INFO "Base address: 0x%p\n", uccf->uf_regs); |
| |
| printk(KERN_INFO "gumr : addr=0x%p, val=0x%08x\n", |
| &uccf->uf_regs->gumr, in_be32(&uccf->uf_regs->gumr)); |
| printk(KERN_INFO "upsmr : addr=0x%p, val=0x%08x\n", |
| &uccf->uf_regs->upsmr, in_be32(&uccf->uf_regs->upsmr)); |
| printk(KERN_INFO "utodr : addr=0x%p, val=0x%04x\n", |
| &uccf->uf_regs->utodr, in_be16(&uccf->uf_regs->utodr)); |
| printk(KERN_INFO "udsr : addr=0x%p, val=0x%04x\n", |
| &uccf->uf_regs->udsr, in_be16(&uccf->uf_regs->udsr)); |
| printk(KERN_INFO "ucce : addr=0x%p, val=0x%08x\n", |
| &uccf->uf_regs->ucce, in_be32(&uccf->uf_regs->ucce)); |
| printk(KERN_INFO "uccm : addr=0x%p, val=0x%08x\n", |
| &uccf->uf_regs->uccm, in_be32(&uccf->uf_regs->uccm)); |
| printk(KERN_INFO "uccs : addr=0x%p, val=0x%02x\n", |
| &uccf->uf_regs->uccs, uccf->uf_regs->uccs); |
| printk(KERN_INFO "urfb : addr=0x%p, val=0x%08x\n", |
| &uccf->uf_regs->urfb, in_be32(&uccf->uf_regs->urfb)); |
| printk(KERN_INFO "urfs : addr=0x%p, val=0x%04x\n", |
| &uccf->uf_regs->urfs, in_be16(&uccf->uf_regs->urfs)); |
| printk(KERN_INFO "urfet : addr=0x%p, val=0x%04x\n", |
| &uccf->uf_regs->urfet, in_be16(&uccf->uf_regs->urfet)); |
| printk(KERN_INFO "urfset: addr=0x%p, val=0x%04x\n", |
| &uccf->uf_regs->urfset, in_be16(&uccf->uf_regs->urfset)); |
| printk(KERN_INFO "utfb : addr=0x%p, val=0x%08x\n", |
| &uccf->uf_regs->utfb, in_be32(&uccf->uf_regs->utfb)); |
| printk(KERN_INFO "utfs : addr=0x%p, val=0x%04x\n", |
| &uccf->uf_regs->utfs, in_be16(&uccf->uf_regs->utfs)); |
| printk(KERN_INFO "utfet : addr=0x%p, val=0x%04x\n", |
| &uccf->uf_regs->utfet, in_be16(&uccf->uf_regs->utfet)); |
| printk(KERN_INFO "utftt : addr=0x%p, val=0x%04x\n", |
| &uccf->uf_regs->utftt, in_be16(&uccf->uf_regs->utftt)); |
| printk(KERN_INFO "utpt : addr=0x%p, val=0x%04x\n", |
| &uccf->uf_regs->utpt, in_be16(&uccf->uf_regs->utpt)); |
| printk(KERN_INFO "urtry : addr=0x%p, val=0x%08x\n", |
| &uccf->uf_regs->urtry, in_be32(&uccf->uf_regs->urtry)); |
| printk(KERN_INFO "guemr : addr=0x%p, val=0x%02x\n", |
| &uccf->uf_regs->guemr, uccf->uf_regs->guemr); |
| } |
| EXPORT_SYMBOL(ucc_fast_dump_regs); |
| |
| u32 ucc_fast_get_qe_cr_subblock(int uccf_num) |
| { |
| switch (uccf_num) { |
| case 0: return QE_CR_SUBBLOCK_UCCFAST1; |
| case 1: return QE_CR_SUBBLOCK_UCCFAST2; |
| case 2: return QE_CR_SUBBLOCK_UCCFAST3; |
| case 3: return QE_CR_SUBBLOCK_UCCFAST4; |
| case 4: return QE_CR_SUBBLOCK_UCCFAST5; |
| case 5: return QE_CR_SUBBLOCK_UCCFAST6; |
| case 6: return QE_CR_SUBBLOCK_UCCFAST7; |
| case 7: return QE_CR_SUBBLOCK_UCCFAST8; |
| default: return QE_CR_SUBBLOCK_INVALID; |
| } |
| } |
| EXPORT_SYMBOL(ucc_fast_get_qe_cr_subblock); |
| |
| void ucc_fast_transmit_on_demand(struct ucc_fast_private * uccf) |
| { |
| out_be16(&uccf->uf_regs->utodr, UCC_FAST_TOD); |
| } |
| EXPORT_SYMBOL(ucc_fast_transmit_on_demand); |
| |
| void ucc_fast_enable(struct ucc_fast_private * uccf, enum comm_dir mode) |
| { |
| struct ucc_fast *uf_regs; |
| u32 gumr; |
| |
| uf_regs = uccf->uf_regs; |
| |
| /* Enable reception and/or transmission on this UCC. */ |
| gumr = in_be32(&uf_regs->gumr); |
| if (mode & COMM_DIR_TX) { |
| gumr |= UCC_FAST_GUMR_ENT; |
| uccf->enabled_tx = 1; |
| } |
| if (mode & COMM_DIR_RX) { |
| gumr |= UCC_FAST_GUMR_ENR; |
| uccf->enabled_rx = 1; |
| } |
| out_be32(&uf_regs->gumr, gumr); |
| } |
| EXPORT_SYMBOL(ucc_fast_enable); |
| |
| void ucc_fast_disable(struct ucc_fast_private * uccf, enum comm_dir mode) |
| { |
| struct ucc_fast *uf_regs; |
| u32 gumr; |
| |
| uf_regs = uccf->uf_regs; |
| |
| /* Disable reception and/or transmission on this UCC. */ |
| gumr = in_be32(&uf_regs->gumr); |
| if (mode & COMM_DIR_TX) { |
| gumr &= ~UCC_FAST_GUMR_ENT; |
| uccf->enabled_tx = 0; |
| } |
| if (mode & COMM_DIR_RX) { |
| gumr &= ~UCC_FAST_GUMR_ENR; |
| uccf->enabled_rx = 0; |
| } |
| out_be32(&uf_regs->gumr, gumr); |
| } |
| EXPORT_SYMBOL(ucc_fast_disable); |
| |
| int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** uccf_ret) |
| { |
| struct ucc_fast_private *uccf; |
| struct ucc_fast *uf_regs; |
| u32 gumr; |
| int ret; |
| |
| if (!uf_info) |
| return -EINVAL; |
| |
| /* check if the UCC port number is in range. */ |
| if ((uf_info->ucc_num < 0) || (uf_info->ucc_num > UCC_MAX_NUM - 1)) { |
| printk(KERN_ERR "%s: illegal UCC number\n", __func__); |
| return -EINVAL; |
| } |
| |
| /* Check that 'max_rx_buf_length' is properly aligned (4). */ |
| if (uf_info->max_rx_buf_length & (UCC_FAST_MRBLR_ALIGNMENT - 1)) { |
| printk(KERN_ERR "%s: max_rx_buf_length not aligned\n", |
| __func__); |
| return -EINVAL; |
| } |
| |
| /* Validate Virtual Fifo register values */ |
| if (uf_info->urfs < UCC_FAST_URFS_MIN_VAL) { |
| printk(KERN_ERR "%s: urfs is too small\n", __func__); |
| return -EINVAL; |
| } |
| |
| if (uf_info->urfs & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) { |
| printk(KERN_ERR "%s: urfs is not aligned\n", __func__); |
| return -EINVAL; |
| } |
| |
| if (uf_info->urfet & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) { |
| printk(KERN_ERR "%s: urfet is not aligned.\n", __func__); |
| return -EINVAL; |
| } |
| |
| if (uf_info->urfset & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) { |
| printk(KERN_ERR "%s: urfset is not aligned\n", __func__); |
| return -EINVAL; |
| } |
| |
| if (uf_info->utfs & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) { |
| printk(KERN_ERR "%s: utfs is not aligned\n", __func__); |
| return -EINVAL; |
| } |
| |
| if (uf_info->utfet & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) { |
| printk(KERN_ERR "%s: utfet is not aligned\n", __func__); |
| return -EINVAL; |
| } |
| |
| if (uf_info->utftt & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) { |
| printk(KERN_ERR "%s: utftt is not aligned\n", __func__); |
| return -EINVAL; |
| } |
| |
| uccf = kzalloc(sizeof(struct ucc_fast_private), GFP_KERNEL); |
| if (!uccf) { |
| printk(KERN_ERR "%s: Cannot allocate private data\n", |
| __func__); |
| return -ENOMEM; |
| } |
| |
| /* Fill fast UCC structure */ |
| uccf->uf_info = uf_info; |
| /* Set the PHY base address */ |
| uccf->uf_regs = ioremap(uf_info->regs, sizeof(struct ucc_fast)); |
| if (uccf->uf_regs == NULL) { |
| printk(KERN_ERR "%s: Cannot map UCC registers\n", __func__); |
| return -ENOMEM; |
| } |
| |
| uccf->enabled_tx = 0; |
| uccf->enabled_rx = 0; |
| uccf->stopped_tx = 0; |
| uccf->stopped_rx = 0; |
| uf_regs = uccf->uf_regs; |
| uccf->p_ucce = (u32 *) & (uf_regs->ucce); |
| uccf->p_uccm = (u32 *) & (uf_regs->uccm); |
| #ifdef CONFIG_UGETH_TX_ON_DEMAND |
| uccf->p_utodr = (u16 *) & (uf_regs->utodr); |
| #endif |
| #ifdef STATISTICS |
| uccf->tx_frames = 0; |
| uccf->rx_frames = 0; |
| uccf->rx_discarded = 0; |
| #endif /* STATISTICS */ |
| |
| /* Set UCC to fast type */ |
| ret = ucc_set_type(uf_info->ucc_num, UCC_SPEED_TYPE_FAST); |
| if (ret) { |
| printk(KERN_ERR "%s: cannot set UCC type\n", __func__); |
| ucc_fast_free(uccf); |
| return ret; |
| } |
| |
| uccf->mrblr = uf_info->max_rx_buf_length; |
| |
| /* Set GUMR */ |
| /* For more details see the hardware spec. */ |
| gumr = uf_info->ttx_trx; |
| if (uf_info->tci) |
| gumr |= UCC_FAST_GUMR_TCI; |
| if (uf_info->cdp) |
| gumr |= UCC_FAST_GUMR_CDP; |
| if (uf_info->ctsp) |
| gumr |= UCC_FAST_GUMR_CTSP; |
| if (uf_info->cds) |
| gumr |= UCC_FAST_GUMR_CDS; |
| if (uf_info->ctss) |
| gumr |= UCC_FAST_GUMR_CTSS; |
| if (uf_info->txsy) |
| gumr |= UCC_FAST_GUMR_TXSY; |
| if (uf_info->rsyn) |
| gumr |= UCC_FAST_GUMR_RSYN; |
| gumr |= uf_info->synl; |
| if (uf_info->rtsm) |
| gumr |= UCC_FAST_GUMR_RTSM; |
| gumr |= uf_info->renc; |
| if (uf_info->revd) |
| gumr |= UCC_FAST_GUMR_REVD; |
| gumr |= uf_info->tenc; |
| gumr |= uf_info->tcrc; |
| gumr |= uf_info->mode; |
| out_be32(&uf_regs->gumr, gumr); |
| |
| /* Allocate memory for Tx Virtual Fifo */ |
| uccf->ucc_fast_tx_virtual_fifo_base_offset = |
| qe_muram_alloc(uf_info->utfs, UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT); |
| if (IS_ERR_VALUE(uccf->ucc_fast_tx_virtual_fifo_base_offset)) { |
| printk(KERN_ERR "%s: cannot allocate MURAM for TX FIFO\n", |
| __func__); |
| uccf->ucc_fast_tx_virtual_fifo_base_offset = 0; |
| ucc_fast_free(uccf); |
| return -ENOMEM; |
| } |
| |
| /* Allocate memory for Rx Virtual Fifo */ |
| uccf->ucc_fast_rx_virtual_fifo_base_offset = |
| qe_muram_alloc(uf_info->urfs + |
| UCC_FAST_RECEIVE_VIRTUAL_FIFO_SIZE_FUDGE_FACTOR, |
| UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT); |
| if (IS_ERR_VALUE(uccf->ucc_fast_rx_virtual_fifo_base_offset)) { |
| printk(KERN_ERR "%s: cannot allocate MURAM for RX FIFO\n", |
| __func__); |
| uccf->ucc_fast_rx_virtual_fifo_base_offset = 0; |
| ucc_fast_free(uccf); |
| return -ENOMEM; |
| } |
| |
| /* Set Virtual Fifo registers */ |
| out_be16(&uf_regs->urfs, uf_info->urfs); |
| out_be16(&uf_regs->urfet, uf_info->urfet); |
| out_be16(&uf_regs->urfset, uf_info->urfset); |
| out_be16(&uf_regs->utfs, uf_info->utfs); |
| out_be16(&uf_regs->utfet, uf_info->utfet); |
| out_be16(&uf_regs->utftt, uf_info->utftt); |
| /* utfb, urfb are offsets from MURAM base */ |
| out_be32(&uf_regs->utfb, uccf->ucc_fast_tx_virtual_fifo_base_offset); |
| out_be32(&uf_regs->urfb, uccf->ucc_fast_rx_virtual_fifo_base_offset); |
| |
| /* Mux clocking */ |
| /* Grant Support */ |
| ucc_set_qe_mux_grant(uf_info->ucc_num, uf_info->grant_support); |
| /* Breakpoint Support */ |
| ucc_set_qe_mux_bkpt(uf_info->ucc_num, uf_info->brkpt_support); |
| /* Set Tsa or NMSI mode. */ |
| ucc_set_qe_mux_tsa(uf_info->ucc_num, uf_info->tsa); |
| /* If NMSI (not Tsa), set Tx and Rx clock. */ |
| if (!uf_info->tsa) { |
| /* Rx clock routing */ |
| if ((uf_info->rx_clock != QE_CLK_NONE) && |
| ucc_set_qe_mux_rxtx(uf_info->ucc_num, uf_info->rx_clock, |
| COMM_DIR_RX)) { |
| printk(KERN_ERR "%s: illegal value for RX clock\n", |
| __func__); |
| ucc_fast_free(uccf); |
| return -EINVAL; |
| } |
| /* Tx clock routing */ |
| if ((uf_info->tx_clock != QE_CLK_NONE) && |
| ucc_set_qe_mux_rxtx(uf_info->ucc_num, uf_info->tx_clock, |
| COMM_DIR_TX)) { |
| printk(KERN_ERR "%s: illegal value for TX clock\n", |
| __func__); |
| ucc_fast_free(uccf); |
| return -EINVAL; |
| } |
| } |
| |
| /* Set interrupt mask register at UCC level. */ |
| out_be32(&uf_regs->uccm, uf_info->uccm_mask); |
| |
| /* First, clear anything pending at UCC level, |
| * otherwise, old garbage may come through |
| * as soon as the dam is opened. */ |
| |
| /* Writing '1' clears */ |
| out_be32(&uf_regs->ucce, 0xffffffff); |
| |
| *uccf_ret = uccf; |
| return 0; |
| } |
| EXPORT_SYMBOL(ucc_fast_init); |
| |
| void ucc_fast_free(struct ucc_fast_private * uccf) |
| { |
| if (!uccf) |
| return; |
| |
| if (uccf->ucc_fast_tx_virtual_fifo_base_offset) |
| qe_muram_free(uccf->ucc_fast_tx_virtual_fifo_base_offset); |
| |
| if (uccf->ucc_fast_rx_virtual_fifo_base_offset) |
| qe_muram_free(uccf->ucc_fast_rx_virtual_fifo_base_offset); |
| |
| kfree(uccf); |
| } |
| EXPORT_SYMBOL(ucc_fast_free); |