| /* |
| * MUSB OTG driver virtual root hub support |
| * |
| * Copyright 2005 Mentor Graphics Corporation |
| * Copyright (C) 2005-2006 by Texas Instruments |
| * Copyright (C) 2006-2007 Nokia Corporation |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA |
| * 02110-1301 USA |
| * |
| * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED |
| * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF |
| * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN |
| * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT, |
| * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT |
| * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF |
| * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON |
| * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF |
| * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| * |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/sched.h> |
| #include <linux/errno.h> |
| #include <linux/time.h> |
| #include <linux/timer.h> |
| |
| #include <asm/unaligned.h> |
| |
| #include "musb_core.h" |
| |
| void musb_host_finish_resume(struct work_struct *work) |
| { |
| struct musb *musb; |
| unsigned long flags; |
| u8 power; |
| |
| musb = container_of(work, struct musb, finish_resume_work.work); |
| |
| spin_lock_irqsave(&musb->lock, flags); |
| |
| power = musb_readb(musb->mregs, MUSB_POWER); |
| power &= ~MUSB_POWER_RESUME; |
| musb_dbg(musb, "root port resume stopped, power %02x", power); |
| musb_writeb(musb->mregs, MUSB_POWER, power); |
| |
| /* |
| * ISSUE: DaVinci (RTL 1.300) disconnects after |
| * resume of high speed peripherals (but not full |
| * speed ones). |
| */ |
| musb->is_active = 1; |
| musb->port1_status &= ~(USB_PORT_STAT_SUSPEND | MUSB_PORT_STAT_RESUME); |
| musb->port1_status |= USB_PORT_STAT_C_SUSPEND << 16; |
| usb_hcd_poll_rh_status(musb->hcd); |
| /* NOTE: it might really be A_WAIT_BCON ... */ |
| musb->xceiv->otg->state = OTG_STATE_A_HOST; |
| |
| spin_unlock_irqrestore(&musb->lock, flags); |
| } |
| |
| void musb_port_suspend(struct musb *musb, bool do_suspend) |
| { |
| struct usb_otg *otg = musb->xceiv->otg; |
| u8 power; |
| void __iomem *mbase = musb->mregs; |
| |
| if (!is_host_active(musb)) |
| return; |
| |
| /* NOTE: this doesn't necessarily put PHY into low power mode, |
| * turning off its clock; that's a function of PHY integration and |
| * MUSB_POWER_ENSUSPEND. PHY may need a clock (sigh) to detect |
| * SE0 changing to connect (J) or wakeup (K) states. |
| */ |
| power = musb_readb(mbase, MUSB_POWER); |
| if (do_suspend) { |
| int retries = 10000; |
| |
| power &= ~MUSB_POWER_RESUME; |
| power |= MUSB_POWER_SUSPENDM; |
| musb_writeb(mbase, MUSB_POWER, power); |
| |
| /* Needed for OPT A tests */ |
| power = musb_readb(mbase, MUSB_POWER); |
| while (power & MUSB_POWER_SUSPENDM) { |
| power = musb_readb(mbase, MUSB_POWER); |
| if (retries-- < 1) |
| break; |
| } |
| |
| musb_dbg(musb, "Root port suspended, power %02x", power); |
| |
| musb->port1_status |= USB_PORT_STAT_SUSPEND; |
| switch (musb->xceiv->otg->state) { |
| case OTG_STATE_A_HOST: |
| musb->xceiv->otg->state = OTG_STATE_A_SUSPEND; |
| musb->is_active = otg->host->b_hnp_enable; |
| if (musb->is_active) |
| mod_timer(&musb->otg_timer, jiffies |
| + msecs_to_jiffies( |
| OTG_TIME_A_AIDL_BDIS)); |
| musb_platform_try_idle(musb, 0); |
| break; |
| case OTG_STATE_B_HOST: |
| musb->xceiv->otg->state = OTG_STATE_B_WAIT_ACON; |
| musb->is_active = otg->host->b_hnp_enable; |
| musb_platform_try_idle(musb, 0); |
| break; |
| default: |
| musb_dbg(musb, "bogus rh suspend? %s", |
| usb_otg_state_string(musb->xceiv->otg->state)); |
| } |
| } else if (power & MUSB_POWER_SUSPENDM) { |
| power &= ~MUSB_POWER_SUSPENDM; |
| power |= MUSB_POWER_RESUME; |
| musb_writeb(mbase, MUSB_POWER, power); |
| |
| musb_dbg(musb, "Root port resuming, power %02x", power); |
| |
| /* later, GetPortStatus will stop RESUME signaling */ |
| musb->port1_status |= MUSB_PORT_STAT_RESUME; |
| schedule_delayed_work(&musb->finish_resume_work, |
| msecs_to_jiffies(USB_RESUME_TIMEOUT)); |
| } |
| } |
| |
| void musb_port_reset(struct musb *musb, bool do_reset) |
| { |
| u8 power; |
| void __iomem *mbase = musb->mregs; |
| |
| if (musb->xceiv->otg->state == OTG_STATE_B_IDLE) { |
| musb_dbg(musb, "HNP: Returning from HNP; no hub reset from b_idle"); |
| musb->port1_status &= ~USB_PORT_STAT_RESET; |
| return; |
| } |
| |
| if (!is_host_active(musb)) |
| return; |
| |
| /* NOTE: caller guarantees it will turn off the reset when |
| * the appropriate amount of time has passed |
| */ |
| power = musb_readb(mbase, MUSB_POWER); |
| if (do_reset) { |
| /* |
| * If RESUME is set, we must make sure it stays minimum 20 ms. |
| * Then we must clear RESUME and wait a bit to let musb start |
| * generating SOFs. If we don't do this, OPT HS A 6.8 tests |
| * fail with "Error! Did not receive an SOF before suspend |
| * detected". |
| */ |
| if (power & MUSB_POWER_RESUME) { |
| long remain = (unsigned long) musb->rh_timer - jiffies; |
| |
| if (musb->rh_timer > 0 && remain > 0) { |
| /* take into account the minimum delay after resume */ |
| schedule_delayed_work( |
| &musb->deassert_reset_work, remain); |
| return; |
| } |
| |
| musb_writeb(mbase, MUSB_POWER, |
| power & ~MUSB_POWER_RESUME); |
| |
| /* Give the core 1 ms to clear MUSB_POWER_RESUME */ |
| schedule_delayed_work(&musb->deassert_reset_work, |
| msecs_to_jiffies(1)); |
| return; |
| } |
| |
| power &= 0xf0; |
| musb_writeb(mbase, MUSB_POWER, |
| power | MUSB_POWER_RESET); |
| |
| musb->port1_status |= USB_PORT_STAT_RESET; |
| musb->port1_status &= ~USB_PORT_STAT_ENABLE; |
| schedule_delayed_work(&musb->deassert_reset_work, |
| msecs_to_jiffies(50)); |
| } else { |
| musb_dbg(musb, "root port reset stopped"); |
| musb_platform_pre_root_reset_end(musb); |
| musb_writeb(mbase, MUSB_POWER, |
| power & ~MUSB_POWER_RESET); |
| musb_platform_post_root_reset_end(musb); |
| |
| power = musb_readb(mbase, MUSB_POWER); |
| if (power & MUSB_POWER_HSMODE) { |
| musb_dbg(musb, "high-speed device connected"); |
| musb->port1_status |= USB_PORT_STAT_HIGH_SPEED; |
| } |
| |
| musb->port1_status &= ~USB_PORT_STAT_RESET; |
| musb->port1_status |= USB_PORT_STAT_ENABLE |
| | (USB_PORT_STAT_C_RESET << 16) |
| | (USB_PORT_STAT_C_ENABLE << 16); |
| usb_hcd_poll_rh_status(musb->hcd); |
| |
| musb->vbuserr_retry = VBUSERR_RETRY_COUNT; |
| } |
| } |
| |
| void musb_root_disconnect(struct musb *musb) |
| { |
| struct usb_otg *otg = musb->xceiv->otg; |
| |
| musb->port1_status = USB_PORT_STAT_POWER |
| | (USB_PORT_STAT_C_CONNECTION << 16); |
| |
| usb_hcd_poll_rh_status(musb->hcd); |
| musb->is_active = 0; |
| |
| switch (musb->xceiv->otg->state) { |
| case OTG_STATE_A_SUSPEND: |
| if (otg->host->b_hnp_enable) { |
| musb->xceiv->otg->state = OTG_STATE_A_PERIPHERAL; |
| musb->g.is_a_peripheral = 1; |
| break; |
| } |
| /* FALLTHROUGH */ |
| case OTG_STATE_A_HOST: |
| musb->xceiv->otg->state = OTG_STATE_A_WAIT_BCON; |
| musb->is_active = 0; |
| break; |
| case OTG_STATE_A_WAIT_VFALL: |
| musb->xceiv->otg->state = OTG_STATE_B_IDLE; |
| break; |
| default: |
| musb_dbg(musb, "host disconnect (%s)", |
| usb_otg_state_string(musb->xceiv->otg->state)); |
| } |
| } |
| |
| |
| /*---------------------------------------------------------------------*/ |
| |
| /* Caller may or may not hold musb->lock */ |
| int musb_hub_status_data(struct usb_hcd *hcd, char *buf) |
| { |
| struct musb *musb = hcd_to_musb(hcd); |
| int retval = 0; |
| |
| /* called in_irq() via usb_hcd_poll_rh_status() */ |
| if (musb->port1_status & 0xffff0000) { |
| *buf = 0x02; |
| retval = 1; |
| } |
| return retval; |
| } |
| |
| static int musb_has_gadget(struct musb *musb) |
| { |
| /* |
| * In host-only mode we start a connection right away. In OTG mode |
| * we have to wait until we loaded a gadget. We don't really need a |
| * gadget if we operate as a host but we should not start a session |
| * as a device without a gadget or else we explode. |
| */ |
| #ifdef CONFIG_USB_MUSB_HOST |
| return 1; |
| #else |
| return musb->port_mode == MUSB_PORT_MODE_HOST; |
| #endif |
| } |
| |
| int musb_hub_control( |
| struct usb_hcd *hcd, |
| u16 typeReq, |
| u16 wValue, |
| u16 wIndex, |
| char *buf, |
| u16 wLength) |
| { |
| struct musb *musb = hcd_to_musb(hcd); |
| u32 temp; |
| int retval = 0; |
| unsigned long flags; |
| bool start_musb = false; |
| |
| spin_lock_irqsave(&musb->lock, flags); |
| |
| if (unlikely(!HCD_HW_ACCESSIBLE(hcd))) { |
| spin_unlock_irqrestore(&musb->lock, flags); |
| return -ESHUTDOWN; |
| } |
| |
| /* hub features: always zero, setting is a NOP |
| * port features: reported, sometimes updated when host is active |
| * no indicators |
| */ |
| switch (typeReq) { |
| case ClearHubFeature: |
| case SetHubFeature: |
| switch (wValue) { |
| case C_HUB_OVER_CURRENT: |
| case C_HUB_LOCAL_POWER: |
| break; |
| default: |
| goto error; |
| } |
| break; |
| case ClearPortFeature: |
| if ((wIndex & 0xff) != 1) |
| goto error; |
| |
| switch (wValue) { |
| case USB_PORT_FEAT_ENABLE: |
| break; |
| case USB_PORT_FEAT_SUSPEND: |
| musb_port_suspend(musb, false); |
| break; |
| case USB_PORT_FEAT_POWER: |
| if (!hcd->self.is_b_host) |
| musb_platform_set_vbus(musb, 0); |
| break; |
| case USB_PORT_FEAT_C_CONNECTION: |
| case USB_PORT_FEAT_C_ENABLE: |
| case USB_PORT_FEAT_C_OVER_CURRENT: |
| case USB_PORT_FEAT_C_RESET: |
| case USB_PORT_FEAT_C_SUSPEND: |
| break; |
| default: |
| goto error; |
| } |
| musb_dbg(musb, "clear feature %d", wValue); |
| musb->port1_status &= ~(1 << wValue); |
| break; |
| case GetHubDescriptor: |
| { |
| struct usb_hub_descriptor *desc = (void *)buf; |
| |
| desc->bDescLength = 9; |
| desc->bDescriptorType = USB_DT_HUB; |
| desc->bNbrPorts = 1; |
| desc->wHubCharacteristics = cpu_to_le16( |
| HUB_CHAR_INDV_PORT_LPSM /* per-port power switching */ |
| | HUB_CHAR_NO_OCPM /* no overcurrent reporting */ |
| ); |
| desc->bPwrOn2PwrGood = 5; /* msec/2 */ |
| desc->bHubContrCurrent = 0; |
| |
| /* workaround bogus struct definition */ |
| desc->u.hs.DeviceRemovable[0] = 0x02; /* port 1 */ |
| desc->u.hs.DeviceRemovable[1] = 0xff; |
| } |
| break; |
| case GetHubStatus: |
| temp = 0; |
| *(__le32 *) buf = cpu_to_le32(temp); |
| break; |
| case GetPortStatus: |
| if (wIndex != 1) |
| goto error; |
| |
| put_unaligned(cpu_to_le32(musb->port1_status |
| & ~MUSB_PORT_STAT_RESUME), |
| (__le32 *) buf); |
| |
| /* port change status is more interesting */ |
| musb_dbg(musb, "port status %08x", musb->port1_status); |
| break; |
| case SetPortFeature: |
| if ((wIndex & 0xff) != 1) |
| goto error; |
| |
| switch (wValue) { |
| case USB_PORT_FEAT_POWER: |
| /* NOTE: this controller has a strange state machine |
| * that involves "requesting sessions" according to |
| * magic side effects from incompletely-described |
| * rules about startup... |
| * |
| * This call is what really starts the host mode; be |
| * very careful about side effects if you reorder any |
| * initialization logic, e.g. for OTG, or change any |
| * logic relating to VBUS power-up. |
| */ |
| if (!hcd->self.is_b_host && musb_has_gadget(musb)) |
| start_musb = true; |
| break; |
| case USB_PORT_FEAT_RESET: |
| musb_port_reset(musb, true); |
| break; |
| case USB_PORT_FEAT_SUSPEND: |
| musb_port_suspend(musb, true); |
| break; |
| case USB_PORT_FEAT_TEST: |
| if (unlikely(is_host_active(musb))) |
| goto error; |
| |
| wIndex >>= 8; |
| switch (wIndex) { |
| case 1: |
| pr_debug("TEST_J\n"); |
| temp = MUSB_TEST_J; |
| break; |
| case 2: |
| pr_debug("TEST_K\n"); |
| temp = MUSB_TEST_K; |
| break; |
| case 3: |
| pr_debug("TEST_SE0_NAK\n"); |
| temp = MUSB_TEST_SE0_NAK; |
| break; |
| case 4: |
| pr_debug("TEST_PACKET\n"); |
| temp = MUSB_TEST_PACKET; |
| musb_load_testpacket(musb); |
| break; |
| case 5: |
| pr_debug("TEST_FORCE_ENABLE\n"); |
| temp = MUSB_TEST_FORCE_HOST |
| | MUSB_TEST_FORCE_HS; |
| |
| musb_writeb(musb->mregs, MUSB_DEVCTL, |
| MUSB_DEVCTL_SESSION); |
| break; |
| case 6: |
| pr_debug("TEST_FIFO_ACCESS\n"); |
| temp = MUSB_TEST_FIFO_ACCESS; |
| break; |
| default: |
| goto error; |
| } |
| musb_writeb(musb->mregs, MUSB_TESTMODE, temp); |
| break; |
| default: |
| goto error; |
| } |
| musb_dbg(musb, "set feature %d", wValue); |
| musb->port1_status |= 1 << wValue; |
| break; |
| |
| default: |
| error: |
| /* "protocol stall" on error */ |
| retval = -EPIPE; |
| } |
| spin_unlock_irqrestore(&musb->lock, flags); |
| |
| if (start_musb) |
| musb_start(musb); |
| |
| return retval; |
| } |