| /** |
| * dwc3-of-simple.c - OF glue layer for simple integrations |
| * |
| * Copyright (c) 2015 Texas Instruments Incorporated - http://www.ti.com |
| * |
| * Author: Felipe Balbi <balbi@ti.com> |
| * |
| * This program is free software: you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 of |
| * the License as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * This is a combination of the old dwc3-qcom.c by Ivan T. Ivanov |
| * <iivanov@mm-sol.com> and the original patch adding support for Xilinx' SoC |
| * by Subbaraya Sundeep Bhatta <subbaraya.sundeep.bhatta@xilinx.com> |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/slab.h> |
| #include <linux/platform_device.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/clk.h> |
| #include <linux/of.h> |
| #include <linux/of_platform.h> |
| #include <linux/pm_runtime.h> |
| |
| struct dwc3_of_simple { |
| struct device *dev; |
| struct clk **clks; |
| int num_clocks; |
| }; |
| |
| static int dwc3_of_simple_clk_init(struct dwc3_of_simple *simple, int count) |
| { |
| struct device *dev = simple->dev; |
| struct device_node *np = dev->of_node; |
| int i; |
| |
| simple->num_clocks = count; |
| |
| if (!count) |
| return 0; |
| |
| simple->clks = devm_kcalloc(dev, simple->num_clocks, |
| sizeof(struct clk *), GFP_KERNEL); |
| if (!simple->clks) |
| return -ENOMEM; |
| |
| for (i = 0; i < simple->num_clocks; i++) { |
| struct clk *clk; |
| int ret; |
| |
| clk = of_clk_get(np, i); |
| if (IS_ERR(clk)) { |
| while (--i >= 0) |
| clk_put(simple->clks[i]); |
| return PTR_ERR(clk); |
| } |
| |
| ret = clk_prepare_enable(clk); |
| if (ret < 0) { |
| while (--i >= 0) { |
| clk_disable_unprepare(simple->clks[i]); |
| clk_put(simple->clks[i]); |
| } |
| clk_put(clk); |
| |
| return ret; |
| } |
| |
| simple->clks[i] = clk; |
| } |
| |
| return 0; |
| } |
| |
| static int dwc3_of_simple_probe(struct platform_device *pdev) |
| { |
| struct dwc3_of_simple *simple; |
| struct device *dev = &pdev->dev; |
| struct device_node *np = dev->of_node; |
| |
| int ret; |
| int i; |
| |
| simple = devm_kzalloc(dev, sizeof(*simple), GFP_KERNEL); |
| if (!simple) |
| return -ENOMEM; |
| |
| platform_set_drvdata(pdev, simple); |
| simple->dev = dev; |
| |
| ret = dwc3_of_simple_clk_init(simple, of_count_phandle_with_args(np, |
| "clocks", "#clock-cells")); |
| if (ret) |
| return ret; |
| |
| ret = of_platform_populate(np, NULL, NULL, dev); |
| if (ret) { |
| for (i = 0; i < simple->num_clocks; i++) { |
| clk_disable_unprepare(simple->clks[i]); |
| clk_put(simple->clks[i]); |
| } |
| |
| return ret; |
| } |
| |
| pm_runtime_set_active(dev); |
| pm_runtime_enable(dev); |
| pm_runtime_get_sync(dev); |
| |
| return 0; |
| } |
| |
| static int dwc3_of_simple_remove(struct platform_device *pdev) |
| { |
| struct dwc3_of_simple *simple = platform_get_drvdata(pdev); |
| struct device *dev = &pdev->dev; |
| int i; |
| |
| for (i = 0; i < simple->num_clocks; i++) { |
| clk_disable_unprepare(simple->clks[i]); |
| clk_put(simple->clks[i]); |
| } |
| |
| of_platform_depopulate(dev); |
| |
| pm_runtime_put_sync(dev); |
| pm_runtime_disable(dev); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM |
| static int dwc3_of_simple_runtime_suspend(struct device *dev) |
| { |
| struct dwc3_of_simple *simple = dev_get_drvdata(dev); |
| int i; |
| |
| for (i = 0; i < simple->num_clocks; i++) |
| clk_disable(simple->clks[i]); |
| |
| return 0; |
| } |
| |
| static int dwc3_of_simple_runtime_resume(struct device *dev) |
| { |
| struct dwc3_of_simple *simple = dev_get_drvdata(dev); |
| int ret; |
| int i; |
| |
| for (i = 0; i < simple->num_clocks; i++) { |
| ret = clk_enable(simple->clks[i]); |
| if (ret < 0) { |
| while (--i >= 0) |
| clk_disable(simple->clks[i]); |
| return ret; |
| } |
| } |
| |
| return 0; |
| } |
| #endif |
| |
| static const struct dev_pm_ops dwc3_of_simple_dev_pm_ops = { |
| SET_RUNTIME_PM_OPS(dwc3_of_simple_runtime_suspend, |
| dwc3_of_simple_runtime_resume, NULL) |
| }; |
| |
| static const struct of_device_id of_dwc3_simple_match[] = { |
| { .compatible = "qcom,dwc3" }, |
| { .compatible = "rockchip,rk3399-dwc3" }, |
| { .compatible = "xlnx,zynqmp-dwc3" }, |
| { .compatible = "cavium,octeon-7130-usb-uctl" }, |
| { /* Sentinel */ } |
| }; |
| MODULE_DEVICE_TABLE(of, of_dwc3_simple_match); |
| |
| static struct platform_driver dwc3_of_simple_driver = { |
| .probe = dwc3_of_simple_probe, |
| .remove = dwc3_of_simple_remove, |
| .driver = { |
| .name = "dwc3-of-simple", |
| .of_match_table = of_dwc3_simple_match, |
| }, |
| }; |
| |
| module_platform_driver(dwc3_of_simple_driver); |
| MODULE_LICENSE("GPL v2"); |
| MODULE_DESCRIPTION("DesignWare USB3 OF Simple Glue Layer"); |
| MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>"); |