| /* |
| * I2C bus driver for Conexant Digicolor SoCs |
| * |
| * Author: Baruch Siach <baruch@tkos.co.il> |
| * |
| * Copyright (C) 2015 Paradox Innovation Ltd. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/completion.h> |
| #include <linux/delay.h> |
| #include <linux/i2c.h> |
| #include <linux/interrupt.h> |
| #include <linux/io.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/platform_device.h> |
| |
| #define DEFAULT_FREQ 100000 |
| #define TIMEOUT_MS 100 |
| |
| #define II_CONTROL 0x0 |
| #define II_CONTROL_LOCAL_RESET BIT(0) |
| |
| #define II_CLOCKTIME 0x1 |
| |
| #define II_COMMAND 0x2 |
| #define II_CMD_START 1 |
| #define II_CMD_RESTART 2 |
| #define II_CMD_SEND_ACK 3 |
| #define II_CMD_GET_ACK 6 |
| #define II_CMD_GET_NOACK 7 |
| #define II_CMD_STOP 10 |
| #define II_COMMAND_GO BIT(7) |
| #define II_COMMAND_COMPLETION_STATUS(r) (((r) >> 5) & 3) |
| #define II_CMD_STATUS_NORMAL 0 |
| #define II_CMD_STATUS_ACK_GOOD 1 |
| #define II_CMD_STATUS_ACK_BAD 2 |
| #define II_CMD_STATUS_ABORT 3 |
| |
| #define II_DATA 0x3 |
| #define II_INTFLAG_CLEAR 0x8 |
| #define II_INTENABLE 0xa |
| |
| struct dc_i2c { |
| struct i2c_adapter adap; |
| struct device *dev; |
| void __iomem *regs; |
| struct clk *clk; |
| unsigned int frequency; |
| |
| struct i2c_msg *msg; |
| unsigned int msgbuf_ptr; |
| int last; |
| spinlock_t lock; |
| struct completion done; |
| int state; |
| int error; |
| }; |
| |
| enum { |
| STATE_IDLE, |
| STATE_START, |
| STATE_ADDR, |
| STATE_WRITE, |
| STATE_READ, |
| STATE_STOP, |
| }; |
| |
| static void dc_i2c_cmd(struct dc_i2c *i2c, u8 cmd) |
| { |
| writeb_relaxed(cmd | II_COMMAND_GO, i2c->regs + II_COMMAND); |
| } |
| |
| static u8 dc_i2c_addr_cmd(struct i2c_msg *msg) |
| { |
| u8 addr = (msg->addr & 0x7f) << 1; |
| |
| if (msg->flags & I2C_M_RD) |
| addr |= 1; |
| |
| return addr; |
| } |
| |
| static void dc_i2c_data(struct dc_i2c *i2c, u8 data) |
| { |
| writeb_relaxed(data, i2c->regs + II_DATA); |
| } |
| |
| static void dc_i2c_write_byte(struct dc_i2c *i2c, u8 byte) |
| { |
| dc_i2c_data(i2c, byte); |
| dc_i2c_cmd(i2c, II_CMD_SEND_ACK); |
| } |
| |
| static void dc_i2c_write_buf(struct dc_i2c *i2c) |
| { |
| dc_i2c_write_byte(i2c, i2c->msg->buf[i2c->msgbuf_ptr++]); |
| } |
| |
| static void dc_i2c_next_read(struct dc_i2c *i2c) |
| { |
| bool last = (i2c->msgbuf_ptr + 1 == i2c->msg->len); |
| |
| dc_i2c_cmd(i2c, last ? II_CMD_GET_NOACK : II_CMD_GET_ACK); |
| } |
| |
| static void dc_i2c_stop(struct dc_i2c *i2c) |
| { |
| i2c->state = STATE_STOP; |
| if (i2c->last) |
| dc_i2c_cmd(i2c, II_CMD_STOP); |
| else |
| complete(&i2c->done); |
| } |
| |
| static u8 dc_i2c_read_byte(struct dc_i2c *i2c) |
| { |
| return readb_relaxed(i2c->regs + II_DATA); |
| } |
| |
| static void dc_i2c_read_buf(struct dc_i2c *i2c) |
| { |
| i2c->msg->buf[i2c->msgbuf_ptr++] = dc_i2c_read_byte(i2c); |
| dc_i2c_next_read(i2c); |
| } |
| |
| static void dc_i2c_set_irq(struct dc_i2c *i2c, int enable) |
| { |
| if (enable) |
| writeb_relaxed(1, i2c->regs + II_INTFLAG_CLEAR); |
| writeb_relaxed(!!enable, i2c->regs + II_INTENABLE); |
| } |
| |
| static int dc_i2c_cmd_status(struct dc_i2c *i2c) |
| { |
| u8 cmd = readb_relaxed(i2c->regs + II_COMMAND); |
| |
| return II_COMMAND_COMPLETION_STATUS(cmd); |
| } |
| |
| static void dc_i2c_start_msg(struct dc_i2c *i2c, int first) |
| { |
| struct i2c_msg *msg = i2c->msg; |
| |
| if (!(msg->flags & I2C_M_NOSTART)) { |
| i2c->state = STATE_START; |
| dc_i2c_cmd(i2c, first ? II_CMD_START : II_CMD_RESTART); |
| } else if (msg->flags & I2C_M_RD) { |
| i2c->state = STATE_READ; |
| dc_i2c_next_read(i2c); |
| } else { |
| i2c->state = STATE_WRITE; |
| dc_i2c_write_buf(i2c); |
| } |
| } |
| |
| static irqreturn_t dc_i2c_irq(int irq, void *dev_id) |
| { |
| struct dc_i2c *i2c = dev_id; |
| int cmd_status = dc_i2c_cmd_status(i2c); |
| unsigned long flags; |
| u8 addr_cmd; |
| |
| writeb_relaxed(1, i2c->regs + II_INTFLAG_CLEAR); |
| |
| spin_lock_irqsave(&i2c->lock, flags); |
| |
| if (cmd_status == II_CMD_STATUS_ACK_BAD |
| || cmd_status == II_CMD_STATUS_ABORT) { |
| i2c->error = -EIO; |
| complete(&i2c->done); |
| goto out; |
| } |
| |
| switch (i2c->state) { |
| case STATE_START: |
| addr_cmd = dc_i2c_addr_cmd(i2c->msg); |
| dc_i2c_write_byte(i2c, addr_cmd); |
| i2c->state = STATE_ADDR; |
| break; |
| case STATE_ADDR: |
| if (i2c->msg->flags & I2C_M_RD) { |
| dc_i2c_next_read(i2c); |
| i2c->state = STATE_READ; |
| break; |
| } |
| i2c->state = STATE_WRITE; |
| /* fall through */ |
| case STATE_WRITE: |
| if (i2c->msgbuf_ptr < i2c->msg->len) |
| dc_i2c_write_buf(i2c); |
| else |
| dc_i2c_stop(i2c); |
| break; |
| case STATE_READ: |
| if (i2c->msgbuf_ptr < i2c->msg->len) |
| dc_i2c_read_buf(i2c); |
| else |
| dc_i2c_stop(i2c); |
| break; |
| case STATE_STOP: |
| i2c->state = STATE_IDLE; |
| complete(&i2c->done); |
| break; |
| } |
| |
| out: |
| spin_unlock_irqrestore(&i2c->lock, flags); |
| return IRQ_HANDLED; |
| } |
| |
| static int dc_i2c_xfer_msg(struct dc_i2c *i2c, struct i2c_msg *msg, int first, |
| int last) |
| { |
| unsigned long timeout = msecs_to_jiffies(TIMEOUT_MS); |
| unsigned long flags; |
| |
| spin_lock_irqsave(&i2c->lock, flags); |
| i2c->msg = msg; |
| i2c->msgbuf_ptr = 0; |
| i2c->last = last; |
| i2c->error = 0; |
| |
| reinit_completion(&i2c->done); |
| dc_i2c_set_irq(i2c, 1); |
| dc_i2c_start_msg(i2c, first); |
| spin_unlock_irqrestore(&i2c->lock, flags); |
| |
| timeout = wait_for_completion_timeout(&i2c->done, timeout); |
| dc_i2c_set_irq(i2c, 0); |
| if (timeout == 0) { |
| i2c->state = STATE_IDLE; |
| return -ETIMEDOUT; |
| } |
| |
| if (i2c->error) |
| return i2c->error; |
| |
| return 0; |
| } |
| |
| static int dc_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num) |
| { |
| struct dc_i2c *i2c = adap->algo_data; |
| int i, ret; |
| |
| for (i = 0; i < num; i++) { |
| ret = dc_i2c_xfer_msg(i2c, &msgs[i], i == 0, i == num - 1); |
| if (ret) |
| return ret; |
| } |
| |
| return num; |
| } |
| |
| static int dc_i2c_init_hw(struct dc_i2c *i2c) |
| { |
| unsigned long clk_rate = clk_get_rate(i2c->clk); |
| unsigned int clocktime; |
| |
| writeb_relaxed(II_CONTROL_LOCAL_RESET, i2c->regs + II_CONTROL); |
| udelay(100); |
| writeb_relaxed(0, i2c->regs + II_CONTROL); |
| udelay(100); |
| |
| clocktime = DIV_ROUND_UP(clk_rate, 64 * i2c->frequency); |
| if (clocktime < 1 || clocktime > 0xff) { |
| dev_err(i2c->dev, "can't set bus speed of %u Hz\n", |
| i2c->frequency); |
| return -EINVAL; |
| } |
| writeb_relaxed(clocktime - 1, i2c->regs + II_CLOCKTIME); |
| |
| return 0; |
| } |
| |
| static u32 dc_i2c_func(struct i2c_adapter *adap) |
| { |
| return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_NOSTART; |
| } |
| |
| static const struct i2c_algorithm dc_i2c_algorithm = { |
| .master_xfer = dc_i2c_xfer, |
| .functionality = dc_i2c_func, |
| }; |
| |
| static int dc_i2c_probe(struct platform_device *pdev) |
| { |
| struct device_node *np = pdev->dev.of_node; |
| struct dc_i2c *i2c; |
| struct resource *r; |
| int ret = 0, irq; |
| |
| i2c = devm_kzalloc(&pdev->dev, sizeof(struct dc_i2c), GFP_KERNEL); |
| if (!i2c) |
| return -ENOMEM; |
| |
| if (of_property_read_u32(pdev->dev.of_node, "clock-frequency", |
| &i2c->frequency)) |
| i2c->frequency = DEFAULT_FREQ; |
| |
| i2c->dev = &pdev->dev; |
| platform_set_drvdata(pdev, i2c); |
| |
| spin_lock_init(&i2c->lock); |
| init_completion(&i2c->done); |
| |
| i2c->clk = devm_clk_get(&pdev->dev, NULL); |
| if (IS_ERR(i2c->clk)) |
| return PTR_ERR(i2c->clk); |
| |
| r = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| i2c->regs = devm_ioremap_resource(&pdev->dev, r); |
| if (IS_ERR(i2c->regs)) |
| return PTR_ERR(i2c->regs); |
| |
| irq = platform_get_irq(pdev, 0); |
| if (irq < 0) |
| return irq; |
| |
| ret = devm_request_irq(&pdev->dev, irq, dc_i2c_irq, 0, |
| dev_name(&pdev->dev), i2c); |
| if (ret < 0) |
| return ret; |
| |
| strlcpy(i2c->adap.name, "Conexant Digicolor I2C adapter", |
| sizeof(i2c->adap.name)); |
| i2c->adap.owner = THIS_MODULE; |
| i2c->adap.algo = &dc_i2c_algorithm; |
| i2c->adap.dev.parent = &pdev->dev; |
| i2c->adap.dev.of_node = np; |
| i2c->adap.algo_data = i2c; |
| |
| ret = dc_i2c_init_hw(i2c); |
| if (ret) |
| return ret; |
| |
| ret = clk_prepare_enable(i2c->clk); |
| if (ret < 0) |
| return ret; |
| |
| ret = i2c_add_adapter(&i2c->adap); |
| if (ret < 0) { |
| clk_unprepare(i2c->clk); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int dc_i2c_remove(struct platform_device *pdev) |
| { |
| struct dc_i2c *i2c = platform_get_drvdata(pdev); |
| |
| i2c_del_adapter(&i2c->adap); |
| clk_disable_unprepare(i2c->clk); |
| |
| return 0; |
| } |
| |
| static const struct of_device_id dc_i2c_match[] = { |
| { .compatible = "cnxt,cx92755-i2c" }, |
| { }, |
| }; |
| |
| static struct platform_driver dc_i2c_driver = { |
| .probe = dc_i2c_probe, |
| .remove = dc_i2c_remove, |
| .driver = { |
| .name = "digicolor-i2c", |
| .of_match_table = dc_i2c_match, |
| }, |
| }; |
| module_platform_driver(dc_i2c_driver); |
| |
| MODULE_AUTHOR("Baruch Siach <baruch@tkos.co.il>"); |
| MODULE_DESCRIPTION("Conexant Digicolor I2C master driver"); |
| MODULE_LICENSE("GPL v2"); |