| /* | |
| * sh7724 MMCIF loader | |
| * | |
| * Copyright (C) 2010 Magnus Damm | |
| * | |
| * This file is subject to the terms and conditions of the GNU General Public | |
| * License. See the file "COPYING" in the main directory of this archive | |
| * for more details. | |
| */ | |
| #include <linux/mmc/sh_mmcif.h> | |
| #include <mach/romimage.h> | |
| #define MMCIF_BASE (void __iomem *)0xa4ca0000 | |
| #define MSTPCR2 0xa4150038 | |
| #define PTWCR 0xa4050146 | |
| #define PTXCR 0xa4050148 | |
| #define PSELA 0xa405014e | |
| #define PSELE 0xa4050156 | |
| #define HIZCRC 0xa405015c | |
| #define DRVCRA 0xa405018a | |
| enum { | |
| MMCIF_PROGRESS_ENTER, | |
| MMCIF_PROGRESS_INIT, | |
| MMCIF_PROGRESS_LOAD, | |
| MMCIF_PROGRESS_DONE | |
| }; | |
| /* SH7724 specific MMCIF loader | |
| * | |
| * loads the romImage from an MMC card starting from block 512 | |
| * use the following line to write the romImage to an MMC card | |
| * # dd if=arch/sh/boot/romImage of=/dev/sdx bs=512 seek=512 | |
| */ | |
| asmlinkage void mmcif_loader(unsigned char *buf, unsigned long no_bytes) | |
| { | |
| mmcif_update_progress(MMCIF_PROGRESS_ENTER); | |
| /* enable clock to the MMCIF hardware block */ | |
| __raw_writel(__raw_readl(MSTPCR2) & ~0x20000000, MSTPCR2); | |
| /* setup pins D7-D0 */ | |
| __raw_writew(0x0000, PTWCR); | |
| /* setup pins MMC_CLK, MMC_CMD */ | |
| __raw_writew(__raw_readw(PTXCR) & ~0x000f, PTXCR); | |
| /* select D3-D0 pin function */ | |
| __raw_writew(__raw_readw(PSELA) & ~0x2000, PSELA); | |
| /* select D7-D4 pin function */ | |
| __raw_writew(__raw_readw(PSELE) & ~0x3000, PSELE); | |
| /* disable Hi-Z for the MMC pins */ | |
| __raw_writew(__raw_readw(HIZCRC) & ~0x0620, HIZCRC); | |
| /* high drive capability for MMC pins */ | |
| __raw_writew(__raw_readw(DRVCRA) | 0x3000, DRVCRA); | |
| mmcif_update_progress(MMCIF_PROGRESS_INIT); | |
| /* setup MMCIF hardware */ | |
| sh_mmcif_boot_init(MMCIF_BASE); | |
| mmcif_update_progress(MMCIF_PROGRESS_LOAD); | |
| /* load kernel via MMCIF interface */ | |
| sh_mmcif_boot_do_read(MMCIF_BASE, 512, | |
| (no_bytes + SH_MMCIF_BBS - 1) / SH_MMCIF_BBS, | |
| buf); | |
| /* disable clock to the MMCIF hardware block */ | |
| __raw_writel(__raw_readl(MSTPCR2) | 0x20000000, MSTPCR2); | |
| mmcif_update_progress(MMCIF_PROGRESS_DONE); | |
| } |