| /* |
| * Copyright 2017 Benjamin Herrenschmidt, IBM Corporation |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License, version 2, as |
| * published by the Free Software Foundation. |
| */ |
| |
| /* File to be included by other .c files */ |
| |
| #define XGLUE(a,b) a##b |
| #define GLUE(a,b) XGLUE(a,b) |
| |
| static void GLUE(X_PFX,ack_pending)(struct kvmppc_xive_vcpu *xc) |
| { |
| u8 cppr; |
| u16 ack; |
| |
| /* |
| * Ensure any previous store to CPPR is ordered vs. |
| * the subsequent loads from PIPR or ACK. |
| */ |
| eieio(); |
| |
| /* |
| * DD1 bug workaround: If PIPR is less favored than CPPR |
| * ignore the interrupt or we might incorrectly lose an IPB |
| * bit. |
| */ |
| if (cpu_has_feature(CPU_FTR_POWER9_DD1)) { |
| __be64 qw1 = __x_readq(__x_tima + TM_QW1_OS); |
| u8 pipr = be64_to_cpu(qw1) & 0xff; |
| if (pipr >= xc->hw_cppr) |
| return; |
| } |
| |
| /* Perform the acknowledge OS to register cycle. */ |
| ack = be16_to_cpu(__x_readw(__x_tima + TM_SPC_ACK_OS_REG)); |
| |
| /* Synchronize subsequent queue accesses */ |
| mb(); |
| |
| /* XXX Check grouping level */ |
| |
| /* Anything ? */ |
| if (!((ack >> 8) & TM_QW1_NSR_EO)) |
| return; |
| |
| /* Grab CPPR of the most favored pending interrupt */ |
| cppr = ack & 0xff; |
| if (cppr < 8) |
| xc->pending |= 1 << cppr; |
| |
| #ifdef XIVE_RUNTIME_CHECKS |
| /* Check consistency */ |
| if (cppr >= xc->hw_cppr) |
| pr_warn("KVM-XIVE: CPU %d odd ack CPPR, got %d at %d\n", |
| smp_processor_id(), cppr, xc->hw_cppr); |
| #endif |
| |
| /* |
| * Update our image of the HW CPPR. We don't yet modify |
| * xc->cppr, this will be done as we scan for interrupts |
| * in the queues. |
| */ |
| xc->hw_cppr = cppr; |
| } |
| |
| static u8 GLUE(X_PFX,esb_load)(struct xive_irq_data *xd, u32 offset) |
| { |
| u64 val; |
| |
| if (xd->flags & XIVE_IRQ_FLAG_SHIFT_BUG) |
| offset |= offset << 4; |
| |
| val =__x_readq(__x_eoi_page(xd) + offset); |
| #ifdef __LITTLE_ENDIAN__ |
| val >>= 64-8; |
| #endif |
| return (u8)val; |
| } |
| |
| |
| static void GLUE(X_PFX,source_eoi)(u32 hw_irq, struct xive_irq_data *xd) |
| { |
| /* If the XIVE supports the new "store EOI facility, use it */ |
| if (xd->flags & XIVE_IRQ_FLAG_STORE_EOI) |
| __x_writeq(0, __x_eoi_page(xd) + XIVE_ESB_STORE_EOI); |
| else if (hw_irq && xd->flags & XIVE_IRQ_FLAG_EOI_FW) { |
| opal_int_eoi(hw_irq); |
| } else { |
| uint64_t eoi_val; |
| |
| /* |
| * Otherwise for EOI, we use the special MMIO that does |
| * a clear of both P and Q and returns the old Q, |
| * except for LSIs where we use the "EOI cycle" special |
| * load. |
| * |
| * This allows us to then do a re-trigger if Q was set |
| * rather than synthetizing an interrupt in software |
| * |
| * For LSIs, using the HW EOI cycle works around a problem |
| * on P9 DD1 PHBs where the other ESB accesses don't work |
| * properly. |
| */ |
| if (xd->flags & XIVE_IRQ_FLAG_LSI) |
| __x_readq(__x_eoi_page(xd) + XIVE_ESB_LOAD_EOI); |
| else { |
| eoi_val = GLUE(X_PFX,esb_load)(xd, XIVE_ESB_SET_PQ_00); |
| |
| /* Re-trigger if needed */ |
| if ((eoi_val & 1) && __x_trig_page(xd)) |
| __x_writeq(0, __x_trig_page(xd)); |
| } |
| } |
| } |
| |
| enum { |
| scan_fetch, |
| scan_poll, |
| scan_eoi, |
| }; |
| |
| static u32 GLUE(X_PFX,scan_interrupts)(struct kvmppc_xive_vcpu *xc, |
| u8 pending, int scan_type) |
| { |
| u32 hirq = 0; |
| u8 prio = 0xff; |
| |
| /* Find highest pending priority */ |
| while ((xc->mfrr != 0xff || pending != 0) && hirq == 0) { |
| struct xive_q *q; |
| u32 idx, toggle; |
| __be32 *qpage; |
| |
| /* |
| * If pending is 0 this will return 0xff which is what |
| * we want |
| */ |
| prio = ffs(pending) - 1; |
| |
| /* |
| * If the most favoured prio we found pending is less |
| * favored (or equal) than a pending IPI, we return |
| * the IPI instead. |
| * |
| * Note: If pending was 0 and mfrr is 0xff, we will |
| * not spurriously take an IPI because mfrr cannot |
| * then be smaller than cppr. |
| */ |
| if (prio >= xc->mfrr && xc->mfrr < xc->cppr) { |
| prio = xc->mfrr; |
| hirq = XICS_IPI; |
| break; |
| } |
| |
| /* Don't scan past the guest cppr */ |
| if (prio >= xc->cppr || prio > 7) |
| break; |
| |
| /* Grab queue and pointers */ |
| q = &xc->queues[prio]; |
| idx = q->idx; |
| toggle = q->toggle; |
| |
| /* |
| * Snapshot the queue page. The test further down for EOI |
| * must use the same "copy" that was used by __xive_read_eq |
| * since qpage can be set concurrently and we don't want |
| * to miss an EOI. |
| */ |
| qpage = READ_ONCE(q->qpage); |
| |
| skip_ipi: |
| /* |
| * Try to fetch from the queue. Will return 0 for a |
| * non-queueing priority (ie, qpage = 0). |
| */ |
| hirq = __xive_read_eq(qpage, q->msk, &idx, &toggle); |
| |
| /* |
| * If this was a signal for an MFFR change done by |
| * H_IPI we skip it. Additionally, if we were fetching |
| * we EOI it now, thus re-enabling reception of a new |
| * such signal. |
| * |
| * We also need to do that if prio is 0 and we had no |
| * page for the queue. In this case, we have non-queued |
| * IPI that needs to be EOId. |
| * |
| * This is safe because if we have another pending MFRR |
| * change that wasn't observed above, the Q bit will have |
| * been set and another occurrence of the IPI will trigger. |
| */ |
| if (hirq == XICS_IPI || (prio == 0 && !qpage)) { |
| if (scan_type == scan_fetch) |
| GLUE(X_PFX,source_eoi)(xc->vp_ipi, |
| &xc->vp_ipi_data); |
| /* Loop back on same queue with updated idx/toggle */ |
| #ifdef XIVE_RUNTIME_CHECKS |
| WARN_ON(hirq && hirq != XICS_IPI); |
| #endif |
| if (hirq) |
| goto skip_ipi; |
| } |
| |
| /* If fetching, update queue pointers */ |
| if (scan_type == scan_fetch) { |
| q->idx = idx; |
| q->toggle = toggle; |
| } |
| |
| /* Something found, stop searching */ |
| if (hirq) |
| break; |
| |
| /* Clear the pending bit on the now empty queue */ |
| pending &= ~(1 << prio); |
| |
| /* |
| * Check if the queue count needs adjusting due to |
| * interrupts being moved away. |
| */ |
| if (atomic_read(&q->pending_count)) { |
| int p = atomic_xchg(&q->pending_count, 0); |
| if (p) { |
| #ifdef XIVE_RUNTIME_CHECKS |
| WARN_ON(p > atomic_read(&q->count)); |
| #endif |
| atomic_sub(p, &q->count); |
| } |
| } |
| } |
| |
| /* If we are just taking a "peek", do nothing else */ |
| if (scan_type == scan_poll) |
| return hirq; |
| |
| /* Update the pending bits */ |
| xc->pending = pending; |
| |
| /* |
| * If this is an EOI that's it, no CPPR adjustment done here, |
| * all we needed was cleanup the stale pending bits and check |
| * if there's anything left. |
| */ |
| if (scan_type == scan_eoi) |
| return hirq; |
| |
| /* |
| * If we found an interrupt, adjust what the guest CPPR should |
| * be as if we had just fetched that interrupt from HW. |
| * |
| * Note: This can only make xc->cppr smaller as the previous |
| * loop will only exit with hirq != 0 if prio is lower than |
| * the current xc->cppr. Thus we don't need to re-check xc->mfrr |
| * for pending IPIs. |
| */ |
| if (hirq) |
| xc->cppr = prio; |
| /* |
| * If it was an IPI the HW CPPR might have been lowered too much |
| * as the HW interrupt we use for IPIs is routed to priority 0. |
| * |
| * We re-sync it here. |
| */ |
| if (xc->cppr != xc->hw_cppr) { |
| xc->hw_cppr = xc->cppr; |
| __x_writeb(xc->cppr, __x_tima + TM_QW1_OS + TM_CPPR); |
| } |
| |
| return hirq; |
| } |
| |
| X_STATIC unsigned long GLUE(X_PFX,h_xirr)(struct kvm_vcpu *vcpu) |
| { |
| struct kvmppc_xive_vcpu *xc = vcpu->arch.xive_vcpu; |
| u8 old_cppr; |
| u32 hirq; |
| |
| pr_devel("H_XIRR\n"); |
| |
| xc->GLUE(X_STAT_PFX,h_xirr)++; |
| |
| /* First collect pending bits from HW */ |
| GLUE(X_PFX,ack_pending)(xc); |
| |
| /* |
| * Cleanup the old-style bits if needed (they may have been |
| * set by pull or an escalation interrupts). |
| */ |
| if (test_bit(BOOK3S_IRQPRIO_EXTERNAL, &vcpu->arch.pending_exceptions)) |
| clear_bit(BOOK3S_IRQPRIO_EXTERNAL_LEVEL, |
| &vcpu->arch.pending_exceptions); |
| |
| pr_devel(" new pending=0x%02x hw_cppr=%d cppr=%d\n", |
| xc->pending, xc->hw_cppr, xc->cppr); |
| |
| /* Grab previous CPPR and reverse map it */ |
| old_cppr = xive_prio_to_guest(xc->cppr); |
| |
| /* Scan for actual interrupts */ |
| hirq = GLUE(X_PFX,scan_interrupts)(xc, xc->pending, scan_fetch); |
| |
| pr_devel(" got hirq=0x%x hw_cppr=%d cppr=%d\n", |
| hirq, xc->hw_cppr, xc->cppr); |
| |
| #ifdef XIVE_RUNTIME_CHECKS |
| /* That should never hit */ |
| if (hirq & 0xff000000) |
| pr_warn("XIVE: Weird guest interrupt number 0x%08x\n", hirq); |
| #endif |
| |
| /* |
| * XXX We could check if the interrupt is masked here and |
| * filter it. If we chose to do so, we would need to do: |
| * |
| * if (masked) { |
| * lock(); |
| * if (masked) { |
| * old_Q = true; |
| * hirq = 0; |
| * } |
| * unlock(); |
| * } |
| */ |
| |
| /* Return interrupt and old CPPR in GPR4 */ |
| vcpu->arch.gpr[4] = hirq | (old_cppr << 24); |
| |
| return H_SUCCESS; |
| } |
| |
| X_STATIC unsigned long GLUE(X_PFX,h_ipoll)(struct kvm_vcpu *vcpu, unsigned long server) |
| { |
| struct kvmppc_xive_vcpu *xc = vcpu->arch.xive_vcpu; |
| u8 pending = xc->pending; |
| u32 hirq; |
| |
| pr_devel("H_IPOLL(server=%ld)\n", server); |
| |
| xc->GLUE(X_STAT_PFX,h_ipoll)++; |
| |
| /* Grab the target VCPU if not the current one */ |
| if (xc->server_num != server) { |
| vcpu = kvmppc_xive_find_server(vcpu->kvm, server); |
| if (!vcpu) |
| return H_PARAMETER; |
| xc = vcpu->arch.xive_vcpu; |
| |
| /* Scan all priorities */ |
| pending = 0xff; |
| } else { |
| /* Grab pending interrupt if any */ |
| __be64 qw1 = __x_readq(__x_tima + TM_QW1_OS); |
| u8 pipr = be64_to_cpu(qw1) & 0xff; |
| if (pipr < 8) |
| pending |= 1 << pipr; |
| } |
| |
| hirq = GLUE(X_PFX,scan_interrupts)(xc, pending, scan_poll); |
| |
| /* Return interrupt and old CPPR in GPR4 */ |
| vcpu->arch.gpr[4] = hirq | (xc->cppr << 24); |
| |
| return H_SUCCESS; |
| } |
| |
| static void GLUE(X_PFX,push_pending_to_hw)(struct kvmppc_xive_vcpu *xc) |
| { |
| u8 pending, prio; |
| |
| pending = xc->pending; |
| if (xc->mfrr != 0xff) { |
| if (xc->mfrr < 8) |
| pending |= 1 << xc->mfrr; |
| else |
| pending |= 0x80; |
| } |
| if (!pending) |
| return; |
| prio = ffs(pending) - 1; |
| |
| __x_writeb(prio, __x_tima + TM_SPC_SET_OS_PENDING); |
| } |
| |
| X_STATIC int GLUE(X_PFX,h_cppr)(struct kvm_vcpu *vcpu, unsigned long cppr) |
| { |
| struct kvmppc_xive_vcpu *xc = vcpu->arch.xive_vcpu; |
| u8 old_cppr; |
| |
| pr_devel("H_CPPR(cppr=%ld)\n", cppr); |
| |
| xc->GLUE(X_STAT_PFX,h_cppr)++; |
| |
| /* Map CPPR */ |
| cppr = xive_prio_from_guest(cppr); |
| |
| /* Remember old and update SW state */ |
| old_cppr = xc->cppr; |
| xc->cppr = cppr; |
| |
| /* |
| * Order the above update of xc->cppr with the subsequent |
| * read of xc->mfrr inside push_pending_to_hw() |
| */ |
| smp_mb(); |
| |
| /* |
| * We are masking less, we need to look for pending things |
| * to deliver and set VP pending bits accordingly to trigger |
| * a new interrupt otherwise we might miss MFRR changes for |
| * which we have optimized out sending an IPI signal. |
| */ |
| if (cppr > old_cppr) |
| GLUE(X_PFX,push_pending_to_hw)(xc); |
| |
| /* Apply new CPPR */ |
| xc->hw_cppr = cppr; |
| __x_writeb(cppr, __x_tima + TM_QW1_OS + TM_CPPR); |
| |
| return H_SUCCESS; |
| } |
| |
| X_STATIC int GLUE(X_PFX,h_eoi)(struct kvm_vcpu *vcpu, unsigned long xirr) |
| { |
| struct kvmppc_xive *xive = vcpu->kvm->arch.xive; |
| struct kvmppc_xive_src_block *sb; |
| struct kvmppc_xive_irq_state *state; |
| struct kvmppc_xive_vcpu *xc = vcpu->arch.xive_vcpu; |
| struct xive_irq_data *xd; |
| u8 new_cppr = xirr >> 24; |
| u32 irq = xirr & 0x00ffffff, hw_num; |
| u16 src; |
| int rc = 0; |
| |
| pr_devel("H_EOI(xirr=%08lx)\n", xirr); |
| |
| xc->GLUE(X_STAT_PFX,h_eoi)++; |
| |
| xc->cppr = xive_prio_from_guest(new_cppr); |
| |
| /* |
| * IPIs are synthetized from MFRR and thus don't need |
| * any special EOI handling. The underlying interrupt |
| * used to signal MFRR changes is EOId when fetched from |
| * the queue. |
| */ |
| if (irq == XICS_IPI || irq == 0) { |
| /* |
| * This barrier orders the setting of xc->cppr vs. |
| * subsquent test of xc->mfrr done inside |
| * scan_interrupts and push_pending_to_hw |
| */ |
| smp_mb(); |
| goto bail; |
| } |
| |
| /* Find interrupt source */ |
| sb = kvmppc_xive_find_source(xive, irq, &src); |
| if (!sb) { |
| pr_devel(" source not found !\n"); |
| rc = H_PARAMETER; |
| /* Same as above */ |
| smp_mb(); |
| goto bail; |
| } |
| state = &sb->irq_state[src]; |
| kvmppc_xive_select_irq(state, &hw_num, &xd); |
| |
| state->in_eoi = true; |
| |
| /* |
| * This barrier orders both setting of in_eoi above vs, |
| * subsequent test of guest_priority, and the setting |
| * of xc->cppr vs. subsquent test of xc->mfrr done inside |
| * scan_interrupts and push_pending_to_hw |
| */ |
| smp_mb(); |
| |
| again: |
| if (state->guest_priority == MASKED) { |
| arch_spin_lock(&sb->lock); |
| if (state->guest_priority != MASKED) { |
| arch_spin_unlock(&sb->lock); |
| goto again; |
| } |
| pr_devel(" EOI on saved P...\n"); |
| |
| /* Clear old_p, that will cause unmask to perform an EOI */ |
| state->old_p = false; |
| |
| arch_spin_unlock(&sb->lock); |
| } else { |
| pr_devel(" EOI on source...\n"); |
| |
| /* Perform EOI on the source */ |
| GLUE(X_PFX,source_eoi)(hw_num, xd); |
| |
| /* If it's an emulated LSI, check level and resend */ |
| if (state->lsi && state->asserted) |
| __x_writeq(0, __x_trig_page(xd)); |
| |
| } |
| |
| /* |
| * This barrier orders the above guest_priority check |
| * and spin_lock/unlock with clearing in_eoi below. |
| * |
| * It also has to be a full mb() as it must ensure |
| * the MMIOs done in source_eoi() are completed before |
| * state->in_eoi is visible. |
| */ |
| mb(); |
| state->in_eoi = false; |
| bail: |
| |
| /* Re-evaluate pending IRQs and update HW */ |
| GLUE(X_PFX,scan_interrupts)(xc, xc->pending, scan_eoi); |
| GLUE(X_PFX,push_pending_to_hw)(xc); |
| pr_devel(" after scan pending=%02x\n", xc->pending); |
| |
| /* Apply new CPPR */ |
| xc->hw_cppr = xc->cppr; |
| __x_writeb(xc->cppr, __x_tima + TM_QW1_OS + TM_CPPR); |
| |
| return rc; |
| } |
| |
| X_STATIC int GLUE(X_PFX,h_ipi)(struct kvm_vcpu *vcpu, unsigned long server, |
| unsigned long mfrr) |
| { |
| struct kvmppc_xive_vcpu *xc = vcpu->arch.xive_vcpu; |
| |
| pr_devel("H_IPI(server=%08lx,mfrr=%ld)\n", server, mfrr); |
| |
| xc->GLUE(X_STAT_PFX,h_ipi)++; |
| |
| /* Find target */ |
| vcpu = kvmppc_xive_find_server(vcpu->kvm, server); |
| if (!vcpu) |
| return H_PARAMETER; |
| xc = vcpu->arch.xive_vcpu; |
| |
| /* Locklessly write over MFRR */ |
| xc->mfrr = mfrr; |
| |
| /* |
| * The load of xc->cppr below and the subsequent MMIO store |
| * to the IPI must happen after the above mfrr update is |
| * globally visible so that: |
| * |
| * - Synchronize with another CPU doing an H_EOI or a H_CPPR |
| * updating xc->cppr then reading xc->mfrr. |
| * |
| * - The target of the IPI sees the xc->mfrr update |
| */ |
| mb(); |
| |
| /* Shoot the IPI if most favored than target cppr */ |
| if (mfrr < xc->cppr) |
| __x_writeq(0, __x_trig_page(&xc->vp_ipi_data)); |
| |
| return H_SUCCESS; |
| } |