| # |
| # PHY |
| # |
| |
| menu "PHY Subsystem" |
| |
| config GENERIC_PHY |
| bool "PHY Core" |
| help |
| Generic PHY support. |
| |
| This framework is designed to provide a generic interface for PHY |
| devices present in the kernel. This layer will have the generic |
| API by which phy drivers can create PHY using the phy framework and |
| phy users can obtain reference to the PHY. All the users of this |
| framework should select this config. |
| |
| config PHY_BCM_NS_USB2 |
| tristate "Broadcom Northstar USB 2.0 PHY Driver" |
| depends on ARCH_BCM_IPROC || COMPILE_TEST |
| depends on HAS_IOMEM && OF |
| select GENERIC_PHY |
| help |
| Enable this to support Broadcom USB 2.0 PHY connected to the USB |
| controller on Northstar family. |
| |
| config PHY_BCM_NS_USB3 |
| tristate "Broadcom Northstar USB 3.0 PHY Driver" |
| depends on ARCH_BCM_IPROC || COMPILE_TEST |
| depends on HAS_IOMEM && OF |
| select GENERIC_PHY |
| help |
| Enable this to support Broadcom USB 3.0 PHY connected to the USB |
| controller on Northstar family. |
| |
| config PHY_BERLIN_USB |
| tristate "Marvell Berlin USB PHY Driver" |
| depends on ARCH_BERLIN && RESET_CONTROLLER && HAS_IOMEM && OF |
| select GENERIC_PHY |
| help |
| Enable this to support the USB PHY on Marvell Berlin SoCs. |
| |
| config PHY_BERLIN_SATA |
| tristate "Marvell Berlin SATA PHY driver" |
| depends on ARCH_BERLIN && HAS_IOMEM && OF |
| select GENERIC_PHY |
| help |
| Enable this to support the SATA PHY on Marvell Berlin SoCs. |
| |
| config ARMADA375_USBCLUSTER_PHY |
| def_bool y |
| depends on MACH_ARMADA_375 || COMPILE_TEST |
| depends on OF && HAS_IOMEM |
| select GENERIC_PHY |
| |
| config PHY_DA8XX_USB |
| tristate "TI DA8xx USB PHY Driver" |
| depends on ARCH_DAVINCI_DA8XX |
| select GENERIC_PHY |
| select MFD_SYSCON |
| help |
| Enable this to support the USB PHY on DA8xx SoCs. |
| |
| This driver controls both the USB 1.1 PHY and the USB 2.0 PHY. |
| |
| config PHY_DM816X_USB |
| tristate "TI dm816x USB PHY driver" |
| depends on ARCH_OMAP2PLUS |
| depends on USB_SUPPORT |
| select GENERIC_PHY |
| select USB_PHY |
| help |
| Enable this for dm816x USB to work. |
| |
| config PHY_EXYNOS_MIPI_VIDEO |
| tristate "S5P/EXYNOS SoC series MIPI CSI-2/DSI PHY driver" |
| depends on HAS_IOMEM |
| depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST |
| select GENERIC_PHY |
| default y if ARCH_S5PV210 || ARCH_EXYNOS |
| help |
| Support for MIPI CSI-2 and MIPI DSI DPHY found on Samsung S5P |
| and EXYNOS SoCs. |
| |
| config PHY_LPC18XX_USB_OTG |
| tristate "NXP LPC18xx/43xx SoC USB OTG PHY driver" |
| depends on OF && (ARCH_LPC18XX || COMPILE_TEST) |
| depends on MFD_SYSCON |
| select GENERIC_PHY |
| help |
| Enable this to support NXP LPC18xx/43xx internal USB OTG PHY. |
| |
| This driver is need for USB0 support on LPC18xx/43xx and takes |
| care of enabling and clock setup. |
| |
| config PHY_PXA_28NM_HSIC |
| tristate "Marvell USB HSIC 28nm PHY Driver" |
| depends on HAS_IOMEM |
| select GENERIC_PHY |
| help |
| Enable this to support Marvell USB HSIC PHY driver for Marvell |
| SoC. This driver will do the PHY initialization and shutdown. |
| The PHY driver will be used by Marvell ehci driver. |
| |
| To compile this driver as a module, choose M here. |
| |
| config PHY_PXA_28NM_USB2 |
| tristate "Marvell USB 2.0 28nm PHY Driver" |
| depends on HAS_IOMEM |
| select GENERIC_PHY |
| help |
| Enable this to support Marvell USB 2.0 PHY driver for Marvell |
| SoC. This driver will do the PHY initialization and shutdown. |
| The PHY driver will be used by Marvell udc/ehci/otg driver. |
| |
| To compile this driver as a module, choose M here. |
| |
| config PHY_MVEBU_SATA |
| def_bool y |
| depends on ARCH_DOVE || MACH_DOVE || MACH_KIRKWOOD |
| depends on OF |
| select GENERIC_PHY |
| |
| config PHY_MIPHY28LP |
| tristate "STMicroelectronics MIPHY28LP PHY driver for STiH407" |
| depends on ARCH_STI |
| select GENERIC_PHY |
| help |
| Enable this to support the miphy transceiver (for SATA/PCIE/USB3) |
| that is part of STMicroelectronics STiH407 SoC. |
| |
| config PHY_RCAR_GEN2 |
| tristate "Renesas R-Car generation 2 USB PHY driver" |
| depends on ARCH_RENESAS |
| depends on GENERIC_PHY |
| help |
| Support for USB PHY found on Renesas R-Car generation 2 SoCs. |
| |
| config PHY_RCAR_GEN3_USB2 |
| tristate "Renesas R-Car generation 3 USB 2.0 PHY driver" |
| depends on ARCH_RENESAS |
| depends on EXTCON |
| select GENERIC_PHY |
| help |
| Support for USB 2.0 PHY found on Renesas R-Car generation 3 SoCs. |
| |
| config OMAP_CONTROL_PHY |
| tristate "OMAP CONTROL PHY Driver" |
| depends on ARCH_OMAP2PLUS || COMPILE_TEST |
| help |
| Enable this to add support for the PHY part present in the control |
| module. This driver has API to power on the USB2 PHY and to write to |
| the mailbox. The mailbox is present only in omap4 and the register to |
| power on the USB2 PHY is present in OMAP4 and OMAP5. OMAP5 has an |
| additional register to power on USB3 PHY/SATA PHY/PCIE PHY |
| (PIPE3 PHY). |
| |
| config OMAP_USB2 |
| tristate "OMAP USB2 PHY Driver" |
| depends on ARCH_OMAP2PLUS |
| depends on USB_SUPPORT |
| select GENERIC_PHY |
| select USB_PHY |
| select OMAP_CONTROL_PHY |
| depends on OMAP_OCP2SCP |
| help |
| Enable this to support the transceiver that is part of SOC. This |
| driver takes care of all the PHY functionality apart from comparator. |
| The USB OTG controller communicates with the comparator using this |
| driver. |
| |
| config TI_PIPE3 |
| tristate "TI PIPE3 PHY Driver" |
| depends on ARCH_OMAP2PLUS || COMPILE_TEST |
| select GENERIC_PHY |
| select OMAP_CONTROL_PHY |
| depends on OMAP_OCP2SCP |
| help |
| Enable this to support the PIPE3 PHY that is part of TI SOCs. This |
| driver takes care of all the PHY functionality apart from comparator. |
| This driver interacts with the "OMAP Control PHY Driver" to power |
| on/off the PHY. |
| |
| config TWL4030_USB |
| tristate "TWL4030 USB Transceiver Driver" |
| depends on TWL4030_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS |
| depends on USB_SUPPORT |
| depends on USB_GADGET || !USB_GADGET # if USB_GADGET=m, this can't 'y' |
| select GENERIC_PHY |
| select USB_PHY |
| help |
| Enable this to support the USB OTG transceiver on TWL4030 |
| family chips (including the TWL5030 and TPS659x0 devices). |
| This transceiver supports high and full speed devices plus, |
| in host mode, low speed. |
| |
| config PHY_EXYNOS_DP_VIDEO |
| tristate "EXYNOS SoC series Display Port PHY driver" |
| depends on OF |
| depends on ARCH_EXYNOS || COMPILE_TEST |
| default ARCH_EXYNOS |
| select GENERIC_PHY |
| help |
| Support for Display Port PHY found on Samsung EXYNOS SoCs. |
| |
| config BCM_KONA_USB2_PHY |
| tristate "Broadcom Kona USB2 PHY Driver" |
| depends on HAS_IOMEM |
| select GENERIC_PHY |
| help |
| Enable this to support the Broadcom Kona USB 2.0 PHY. |
| |
| config PHY_EXYNOS5250_SATA |
| tristate "Exynos5250 Sata SerDes/PHY driver" |
| depends on SOC_EXYNOS5250 |
| depends on HAS_IOMEM |
| depends on OF |
| select GENERIC_PHY |
| select I2C |
| select I2C_S3C2410 |
| select MFD_SYSCON |
| help |
| Enable this to support SATA SerDes/Phy found on Samsung's |
| Exynos5250 based SoCs.This SerDes/Phy supports SATA 1.5 Gb/s, |
| SATA 3.0 Gb/s, SATA 6.0 Gb/s speeds. It supports one SATA host |
| port to accept one SATA device. |
| |
| config PHY_HIX5HD2_SATA |
| tristate "HIX5HD2 SATA PHY Driver" |
| depends on ARCH_HIX5HD2 && OF && HAS_IOMEM |
| select GENERIC_PHY |
| select MFD_SYSCON |
| help |
| Support for SATA PHY on Hisilicon hix5hd2 Soc. |
| |
| config PHY_MT65XX_USB3 |
| tristate "Mediatek USB3.0 PHY Driver" |
| depends on ARCH_MEDIATEK && OF |
| select GENERIC_PHY |
| help |
| Say 'Y' here to add support for Mediatek USB3.0 PHY driver, |
| it supports multiple usb2.0 and usb3.0 ports. |
| |
| config PHY_HI6220_USB |
| tristate "hi6220 USB PHY support" |
| depends on (ARCH_HISI && ARM64) || COMPILE_TEST |
| select GENERIC_PHY |
| select MFD_SYSCON |
| help |
| Enable this to support the HISILICON HI6220 USB PHY. |
| |
| To compile this driver as a module, choose M here. |
| |
| config PHY_SUN4I_USB |
| tristate "Allwinner sunxi SoC USB PHY driver" |
| depends on ARCH_SUNXI && HAS_IOMEM && OF |
| depends on RESET_CONTROLLER |
| depends on EXTCON |
| depends on POWER_SUPPLY |
| depends on USB_SUPPORT |
| select GENERIC_PHY |
| select USB_COMMON |
| help |
| Enable this to support the transceiver that is part of Allwinner |
| sunxi SoCs. |
| |
| This driver controls the entire USB PHY block, both the USB OTG |
| parts, as well as the 2 regular USB 2 host PHYs. |
| |
| config PHY_SUN9I_USB |
| tristate "Allwinner sun9i SoC USB PHY driver" |
| depends on ARCH_SUNXI && HAS_IOMEM && OF |
| depends on RESET_CONTROLLER |
| depends on USB_SUPPORT |
| select USB_COMMON |
| select GENERIC_PHY |
| help |
| Enable this to support the transceiver that is part of Allwinner |
| sun9i SoCs. |
| |
| This driver controls each individual USB 2 host PHY. |
| |
| config PHY_SAMSUNG_USB2 |
| tristate "Samsung USB 2.0 PHY driver" |
| depends on HAS_IOMEM |
| depends on USB_EHCI_EXYNOS || USB_OHCI_EXYNOS || USB_DWC2 |
| select GENERIC_PHY |
| select MFD_SYSCON |
| default ARCH_EXYNOS |
| help |
| Enable this to support the Samsung USB 2.0 PHY driver for Samsung |
| SoCs. This driver provides the interface for USB 2.0 PHY. Support |
| for particular PHYs will be enabled based on the SoC type in addition |
| to this driver. |
| |
| config PHY_S5PV210_USB2 |
| bool "Support for S5PV210" |
| depends on PHY_SAMSUNG_USB2 |
| depends on ARCH_S5PV210 |
| help |
| Enable USB PHY support for S5PV210. This option requires that Samsung |
| USB 2.0 PHY driver is enabled and means that support for this |
| particular SoC is compiled in the driver. In case of S5PV210 two phys |
| are available - device and host. |
| |
| config PHY_EXYNOS4210_USB2 |
| bool |
| depends on PHY_SAMSUNG_USB2 |
| default CPU_EXYNOS4210 |
| |
| config PHY_EXYNOS4X12_USB2 |
| bool |
| depends on PHY_SAMSUNG_USB2 |
| default SOC_EXYNOS3250 || SOC_EXYNOS4212 || SOC_EXYNOS4412 |
| |
| config PHY_EXYNOS5250_USB2 |
| bool |
| depends on PHY_SAMSUNG_USB2 |
| default SOC_EXYNOS5250 || SOC_EXYNOS5420 |
| |
| config PHY_EXYNOS5_USBDRD |
| tristate "Exynos5 SoC series USB DRD PHY driver" |
| depends on ARCH_EXYNOS && OF |
| depends on HAS_IOMEM |
| depends on USB_DWC3_EXYNOS |
| select GENERIC_PHY |
| select MFD_SYSCON |
| default y |
| help |
| Enable USB DRD PHY support for Exynos 5 SoC series. |
| This driver provides PHY interface for USB 3.0 DRD controller |
| present on Exynos5 SoC series. |
| |
| config PHY_EXYNOS_PCIE |
| bool "Exynos PCIe PHY driver" |
| depends on OF && (ARCH_EXYNOS || COMPILE_TEST) |
| select GENERIC_PHY |
| help |
| Enable PCIe PHY support for Exynos SoC series. |
| This driver provides PHY interface for Exynos PCIe controller. |
| |
| config PHY_PISTACHIO_USB |
| tristate "IMG Pistachio USB2.0 PHY driver" |
| depends on MACH_PISTACHIO |
| select GENERIC_PHY |
| help |
| Enable this to support the USB2.0 PHY on the IMG Pistachio SoC. |
| |
| config PHY_QCOM_APQ8064_SATA |
| tristate "Qualcomm APQ8064 SATA SerDes/PHY driver" |
| depends on ARCH_QCOM |
| depends on HAS_IOMEM |
| depends on OF |
| select GENERIC_PHY |
| |
| config PHY_QCOM_IPQ806X_SATA |
| tristate "Qualcomm IPQ806x SATA SerDes/PHY driver" |
| depends on ARCH_QCOM |
| depends on HAS_IOMEM |
| depends on OF |
| select GENERIC_PHY |
| |
| config PHY_ROCKCHIP_USB |
| tristate "Rockchip USB2 PHY Driver" |
| depends on ARCH_ROCKCHIP && OF |
| select GENERIC_PHY |
| help |
| Enable this to support the Rockchip USB 2.0 PHY. |
| |
| config PHY_ROCKCHIP_INNO_USB2 |
| tristate "Rockchip INNO USB2PHY Driver" |
| depends on (ARCH_ROCKCHIP || COMPILE_TEST) && OF |
| depends on COMMON_CLK |
| depends on EXTCON |
| depends on USB_SUPPORT |
| select GENERIC_PHY |
| select USB_COMMON |
| help |
| Support for Rockchip USB2.0 PHY with Innosilicon IP block. |
| |
| config PHY_ROCKCHIP_EMMC |
| tristate "Rockchip EMMC PHY Driver" |
| depends on ARCH_ROCKCHIP && OF |
| select GENERIC_PHY |
| help |
| Enable this to support the Rockchip EMMC PHY. |
| |
| config PHY_ROCKCHIP_DP |
| tristate "Rockchip Display Port PHY Driver" |
| depends on ARCH_ROCKCHIP && OF |
| select GENERIC_PHY |
| help |
| Enable this to support the Rockchip Display Port PHY. |
| |
| config PHY_ROCKCHIP_PCIE |
| tristate "Rockchip PCIe PHY Driver" |
| depends on (ARCH_ROCKCHIP && OF) || COMPILE_TEST |
| select GENERIC_PHY |
| select MFD_SYSCON |
| help |
| Enable this to support the Rockchip PCIe PHY. |
| |
| config PHY_ROCKCHIP_TYPEC |
| tristate "Rockchip TYPEC PHY Driver" |
| depends on OF && (ARCH_ROCKCHIP || COMPILE_TEST) |
| select EXTCON |
| select GENERIC_PHY |
| select RESET_CONTROLLER |
| help |
| Enable this to support the Rockchip USB TYPEC PHY. |
| |
| config PHY_ST_SPEAR1310_MIPHY |
| tristate "ST SPEAR1310-MIPHY driver" |
| select GENERIC_PHY |
| depends on MACH_SPEAR1310 || COMPILE_TEST |
| help |
| Support for ST SPEAr1310 MIPHY which can be used for PCIe and SATA. |
| |
| config PHY_ST_SPEAR1340_MIPHY |
| tristate "ST SPEAR1340-MIPHY driver" |
| select GENERIC_PHY |
| depends on MACH_SPEAR1340 || COMPILE_TEST |
| help |
| Support for ST SPEAr1340 MIPHY which can be used for PCIe and SATA. |
| |
| config PHY_XGENE |
| tristate "APM X-Gene 15Gbps PHY support" |
| depends on HAS_IOMEM && OF && (ARM64 || COMPILE_TEST) |
| select GENERIC_PHY |
| help |
| This option enables support for APM X-Gene SoC multi-purpose PHY. |
| |
| config PHY_STIH407_USB |
| tristate "STMicroelectronics USB2 picoPHY driver for STiH407 family" |
| depends on RESET_CONTROLLER |
| depends on ARCH_STI || COMPILE_TEST |
| select GENERIC_PHY |
| help |
| Enable this support to enable the picoPHY device used by USB2 |
| and USB3 controllers on STMicroelectronics STiH407 SoC families. |
| |
| config PHY_QCOM_QMP |
| tristate "Qualcomm QMP PHY Driver" |
| depends on OF && COMMON_CLK && (ARCH_QCOM || COMPILE_TEST) |
| select GENERIC_PHY |
| help |
| Enable this to support the QMP PHY transceiver that is used |
| with controllers such as PCIe, UFS, and USB on Qualcomm chips. |
| |
| config PHY_QCOM_QUSB2 |
| tristate "Qualcomm QUSB2 PHY Driver" |
| depends on OF && (ARCH_QCOM || COMPILE_TEST) |
| depends on NVMEM || !NVMEM |
| select GENERIC_PHY |
| help |
| Enable this to support the HighSpeed QUSB2 PHY transceiver for USB |
| controllers on Qualcomm chips. This driver supports the high-speed |
| PHY which is usually paired with either the ChipIdea or Synopsys DWC3 |
| USB IPs on MSM SOCs. |
| |
| config PHY_QCOM_UFS |
| tristate "Qualcomm UFS PHY driver" |
| depends on OF && ARCH_QCOM |
| select GENERIC_PHY |
| help |
| Support for UFS PHY on QCOM chipsets. |
| |
| config PHY_QCOM_USB_HS |
| tristate "Qualcomm USB HS PHY module" |
| depends on USB_ULPI_BUS |
| depends on EXTCON || !EXTCON # if EXTCON=m, this cannot be built-in |
| select GENERIC_PHY |
| help |
| Support for the USB high-speed ULPI compliant phy on Qualcomm |
| chipsets. |
| |
| config PHY_QCOM_USB_HSIC |
| tristate "Qualcomm USB HSIC ULPI PHY module" |
| depends on USB_ULPI_BUS |
| select GENERIC_PHY |
| help |
| Support for the USB HSIC ULPI compliant PHY on QCOM chipsets. |
| |
| config PHY_TUSB1210 |
| tristate "TI TUSB1210 ULPI PHY module" |
| depends on USB_ULPI_BUS |
| select GENERIC_PHY |
| help |
| Support for TI TUSB1210 USB ULPI PHY. |
| |
| config PHY_BRCM_SATA |
| tristate "Broadcom SATA PHY driver" |
| depends on ARCH_BRCMSTB || ARCH_BCM_IPROC || BMIPS_GENERIC || COMPILE_TEST |
| depends on OF |
| select GENERIC_PHY |
| default ARCH_BCM_IPROC |
| help |
| Enable this to support the Broadcom SATA PHY. |
| If unsure, say N. |
| |
| config PHY_CYGNUS_PCIE |
| tristate "Broadcom Cygnus PCIe PHY driver" |
| depends on OF && (ARCH_BCM_CYGNUS || COMPILE_TEST) |
| select GENERIC_PHY |
| default ARCH_BCM_CYGNUS |
| help |
| Enable this to support the Broadcom Cygnus PCIe PHY. |
| If unsure, say N. |
| |
| source "drivers/phy/tegra/Kconfig" |
| |
| config PHY_NS2_PCIE |
| tristate "Broadcom Northstar2 PCIe PHY driver" |
| depends on OF && MDIO_BUS_MUX_BCM_IPROC |
| select GENERIC_PHY |
| default ARCH_BCM_IPROC |
| help |
| Enable this to support the Broadcom Northstar2 PCIe PHY. |
| If unsure, say N. |
| |
| config PHY_MESON8B_USB2 |
| tristate "Meson8b and GXBB USB2 PHY driver" |
| default ARCH_MESON |
| depends on OF && (ARCH_MESON || COMPILE_TEST) |
| depends on USB_SUPPORT |
| select USB_COMMON |
| select GENERIC_PHY |
| help |
| Enable this to support the Meson USB2 PHYs found in Meson8b |
| and GXBB SoCs. |
| If unsure, say N. |
| |
| endmenu |
