|  | /* | 
|  | * Copyright(c) 2008 - 2009 Atheros Corporation. All rights reserved. | 
|  | * | 
|  | * Derived from Intel e1000 driver | 
|  | * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved. | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify it | 
|  | * under the terms of the GNU General Public License as published by the Free | 
|  | * Software Foundation; either version 2 of the License, or (at your option) | 
|  | * any later version. | 
|  | * | 
|  | * This program is distributed in the hope that it will be useful, but WITHOUT | 
|  | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or | 
|  | * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for | 
|  | * more details. | 
|  | * | 
|  | * You should have received a copy of the GNU General Public License along with | 
|  | * this program; if not, write to the Free Software Foundation, Inc., 59 | 
|  | * Temple Place - Suite 330, Boston, MA  02111-1307, USA. | 
|  | */ | 
|  |  | 
|  | #include "atl1c.h" | 
|  |  | 
|  | #define ATL1C_DRV_VERSION "1.0.1.0-NAPI" | 
|  | char atl1c_driver_name[] = "atl1c"; | 
|  | char atl1c_driver_version[] = ATL1C_DRV_VERSION; | 
|  | #define PCI_DEVICE_ID_ATTANSIC_L2C      0x1062 | 
|  | #define PCI_DEVICE_ID_ATTANSIC_L1C      0x1063 | 
|  | #define PCI_DEVICE_ID_ATHEROS_L2C_B	0x2060 /* AR8152 v1.1 Fast 10/100 */ | 
|  | #define PCI_DEVICE_ID_ATHEROS_L2C_B2	0x2062 /* AR8152 v2.0 Fast 10/100 */ | 
|  | #define PCI_DEVICE_ID_ATHEROS_L1D	0x1073 /* AR8151 v1.0 Gigabit 1000 */ | 
|  | #define PCI_DEVICE_ID_ATHEROS_L1D_2_0	0x1083 /* AR8151 v2.0 Gigabit 1000 */ | 
|  | #define L2CB_V10			0xc0 | 
|  | #define L2CB_V11			0xc1 | 
|  |  | 
|  | /* | 
|  | * atl1c_pci_tbl - PCI Device ID Table | 
|  | * | 
|  | * Wildcard entries (PCI_ANY_ID) should come last | 
|  | * Last entry must be all 0s | 
|  | * | 
|  | * { Vendor ID, Device ID, SubVendor ID, SubDevice ID, | 
|  | *   Class, Class Mask, private data (not used) } | 
|  | */ | 
|  | static DEFINE_PCI_DEVICE_TABLE(atl1c_pci_tbl) = { | 
|  | {PCI_DEVICE(PCI_VENDOR_ID_ATTANSIC, PCI_DEVICE_ID_ATTANSIC_L1C)}, | 
|  | {PCI_DEVICE(PCI_VENDOR_ID_ATTANSIC, PCI_DEVICE_ID_ATTANSIC_L2C)}, | 
|  | {PCI_DEVICE(PCI_VENDOR_ID_ATTANSIC, PCI_DEVICE_ID_ATHEROS_L2C_B)}, | 
|  | {PCI_DEVICE(PCI_VENDOR_ID_ATTANSIC, PCI_DEVICE_ID_ATHEROS_L2C_B2)}, | 
|  | {PCI_DEVICE(PCI_VENDOR_ID_ATTANSIC, PCI_DEVICE_ID_ATHEROS_L1D)}, | 
|  | {PCI_DEVICE(PCI_VENDOR_ID_ATTANSIC, PCI_DEVICE_ID_ATHEROS_L1D_2_0)}, | 
|  | /* required last entry */ | 
|  | { 0 } | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(pci, atl1c_pci_tbl); | 
|  |  | 
|  | MODULE_AUTHOR("Jie Yang <jie.yang@atheros.com>"); | 
|  | MODULE_DESCRIPTION("Atheros 1000M Ethernet Network Driver"); | 
|  | MODULE_LICENSE("GPL"); | 
|  | MODULE_VERSION(ATL1C_DRV_VERSION); | 
|  |  | 
|  | static int atl1c_stop_mac(struct atl1c_hw *hw); | 
|  | static void atl1c_enable_rx_ctrl(struct atl1c_hw *hw); | 
|  | static void atl1c_enable_tx_ctrl(struct atl1c_hw *hw); | 
|  | static void atl1c_disable_l0s_l1(struct atl1c_hw *hw); | 
|  | static void atl1c_set_aspm(struct atl1c_hw *hw, bool linkup); | 
|  | static void atl1c_setup_mac_ctrl(struct atl1c_adapter *adapter); | 
|  | static void atl1c_clean_rx_irq(struct atl1c_adapter *adapter, u8 que, | 
|  | int *work_done, int work_to_do); | 
|  | static int atl1c_up(struct atl1c_adapter *adapter); | 
|  | static void atl1c_down(struct atl1c_adapter *adapter); | 
|  |  | 
|  | static const u16 atl1c_pay_load_size[] = { | 
|  | 128, 256, 512, 1024, 2048, 4096, | 
|  | }; | 
|  |  | 
|  | static const u16 atl1c_rfd_prod_idx_regs[AT_MAX_RECEIVE_QUEUE] = | 
|  | { | 
|  | REG_MB_RFD0_PROD_IDX, | 
|  | REG_MB_RFD1_PROD_IDX, | 
|  | REG_MB_RFD2_PROD_IDX, | 
|  | REG_MB_RFD3_PROD_IDX | 
|  | }; | 
|  |  | 
|  | static const u16 atl1c_rfd_addr_lo_regs[AT_MAX_RECEIVE_QUEUE] = | 
|  | { | 
|  | REG_RFD0_HEAD_ADDR_LO, | 
|  | REG_RFD1_HEAD_ADDR_LO, | 
|  | REG_RFD2_HEAD_ADDR_LO, | 
|  | REG_RFD3_HEAD_ADDR_LO | 
|  | }; | 
|  |  | 
|  | static const u16 atl1c_rrd_addr_lo_regs[AT_MAX_RECEIVE_QUEUE] = | 
|  | { | 
|  | REG_RRD0_HEAD_ADDR_LO, | 
|  | REG_RRD1_HEAD_ADDR_LO, | 
|  | REG_RRD2_HEAD_ADDR_LO, | 
|  | REG_RRD3_HEAD_ADDR_LO | 
|  | }; | 
|  |  | 
|  | static const u32 atl1c_default_msg = NETIF_MSG_DRV | NETIF_MSG_PROBE | | 
|  | NETIF_MSG_LINK | NETIF_MSG_TIMER | NETIF_MSG_IFDOWN | NETIF_MSG_IFUP; | 
|  | static void atl1c_pcie_patch(struct atl1c_hw *hw) | 
|  | { | 
|  | u32 data; | 
|  |  | 
|  | AT_READ_REG(hw, REG_PCIE_PHYMISC, &data); | 
|  | data |= PCIE_PHYMISC_FORCE_RCV_DET; | 
|  | AT_WRITE_REG(hw, REG_PCIE_PHYMISC, data); | 
|  |  | 
|  | if (hw->nic_type == athr_l2c_b && hw->revision_id == L2CB_V10) { | 
|  | AT_READ_REG(hw, REG_PCIE_PHYMISC2, &data); | 
|  |  | 
|  | data &= ~(PCIE_PHYMISC2_SERDES_CDR_MASK << | 
|  | PCIE_PHYMISC2_SERDES_CDR_SHIFT); | 
|  | data |= 3 << PCIE_PHYMISC2_SERDES_CDR_SHIFT; | 
|  | data &= ~(PCIE_PHYMISC2_SERDES_TH_MASK << | 
|  | PCIE_PHYMISC2_SERDES_TH_SHIFT); | 
|  | data |= 3 << PCIE_PHYMISC2_SERDES_TH_SHIFT; | 
|  | AT_WRITE_REG(hw, REG_PCIE_PHYMISC2, data); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* FIXME: no need any more ? */ | 
|  | /* | 
|  | * atl1c_init_pcie - init PCIE module | 
|  | */ | 
|  | static void atl1c_reset_pcie(struct atl1c_hw *hw, u32 flag) | 
|  | { | 
|  | u32 data; | 
|  | u32 pci_cmd; | 
|  | struct pci_dev *pdev = hw->adapter->pdev; | 
|  |  | 
|  | AT_READ_REG(hw, PCI_COMMAND, &pci_cmd); | 
|  | pci_cmd &= ~PCI_COMMAND_INTX_DISABLE; | 
|  | pci_cmd |= (PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | | 
|  | PCI_COMMAND_IO); | 
|  | AT_WRITE_REG(hw, PCI_COMMAND, pci_cmd); | 
|  |  | 
|  | /* | 
|  | * Clear any PowerSaveing Settings | 
|  | */ | 
|  | pci_enable_wake(pdev, PCI_D3hot, 0); | 
|  | pci_enable_wake(pdev, PCI_D3cold, 0); | 
|  |  | 
|  | /* | 
|  | * Mask some pcie error bits | 
|  | */ | 
|  | AT_READ_REG(hw, REG_PCIE_UC_SEVERITY, &data); | 
|  | data &= ~PCIE_UC_SERVRITY_DLP; | 
|  | data &= ~PCIE_UC_SERVRITY_FCP; | 
|  | AT_WRITE_REG(hw, REG_PCIE_UC_SEVERITY, data); | 
|  |  | 
|  | AT_READ_REG(hw, REG_LTSSM_ID_CTRL, &data); | 
|  | data &= ~LTSSM_ID_EN_WRO; | 
|  | AT_WRITE_REG(hw, REG_LTSSM_ID_CTRL, data); | 
|  |  | 
|  | atl1c_pcie_patch(hw); | 
|  | if (flag & ATL1C_PCIE_L0S_L1_DISABLE) | 
|  | atl1c_disable_l0s_l1(hw); | 
|  | if (flag & ATL1C_PCIE_PHY_RESET) | 
|  | AT_WRITE_REG(hw, REG_GPHY_CTRL, GPHY_CTRL_DEFAULT); | 
|  | else | 
|  | AT_WRITE_REG(hw, REG_GPHY_CTRL, | 
|  | GPHY_CTRL_DEFAULT | GPHY_CTRL_EXT_RESET); | 
|  |  | 
|  | msleep(5); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * atl1c_irq_enable - Enable default interrupt generation settings | 
|  | * @adapter: board private structure | 
|  | */ | 
|  | static inline void atl1c_irq_enable(struct atl1c_adapter *adapter) | 
|  | { | 
|  | if (likely(atomic_dec_and_test(&adapter->irq_sem))) { | 
|  | AT_WRITE_REG(&adapter->hw, REG_ISR, 0x7FFFFFFF); | 
|  | AT_WRITE_REG(&adapter->hw, REG_IMR, adapter->hw.intr_mask); | 
|  | AT_WRITE_FLUSH(&adapter->hw); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * atl1c_irq_disable - Mask off interrupt generation on the NIC | 
|  | * @adapter: board private structure | 
|  | */ | 
|  | static inline void atl1c_irq_disable(struct atl1c_adapter *adapter) | 
|  | { | 
|  | atomic_inc(&adapter->irq_sem); | 
|  | AT_WRITE_REG(&adapter->hw, REG_IMR, 0); | 
|  | AT_WRITE_REG(&adapter->hw, REG_ISR, ISR_DIS_INT); | 
|  | AT_WRITE_FLUSH(&adapter->hw); | 
|  | synchronize_irq(adapter->pdev->irq); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * atl1c_irq_reset - reset interrupt confiure on the NIC | 
|  | * @adapter: board private structure | 
|  | */ | 
|  | static inline void atl1c_irq_reset(struct atl1c_adapter *adapter) | 
|  | { | 
|  | atomic_set(&adapter->irq_sem, 1); | 
|  | atl1c_irq_enable(adapter); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * atl1c_wait_until_idle - wait up to AT_HW_MAX_IDLE_DELAY reads | 
|  | * of the idle status register until the device is actually idle | 
|  | */ | 
|  | static u32 atl1c_wait_until_idle(struct atl1c_hw *hw) | 
|  | { | 
|  | int timeout; | 
|  | u32 data; | 
|  |  | 
|  | for (timeout = 0; timeout < AT_HW_MAX_IDLE_DELAY; timeout++) { | 
|  | AT_READ_REG(hw, REG_IDLE_STATUS, &data); | 
|  | if ((data & IDLE_STATUS_MASK) == 0) | 
|  | return 0; | 
|  | msleep(1); | 
|  | } | 
|  | return data; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * atl1c_phy_config - Timer Call-back | 
|  | * @data: pointer to netdev cast into an unsigned long | 
|  | */ | 
|  | static void atl1c_phy_config(unsigned long data) | 
|  | { | 
|  | struct atl1c_adapter *adapter = (struct atl1c_adapter *) data; | 
|  | struct atl1c_hw *hw = &adapter->hw; | 
|  | unsigned long flags; | 
|  |  | 
|  | spin_lock_irqsave(&adapter->mdio_lock, flags); | 
|  | atl1c_restart_autoneg(hw); | 
|  | spin_unlock_irqrestore(&adapter->mdio_lock, flags); | 
|  | } | 
|  |  | 
|  | void atl1c_reinit_locked(struct atl1c_adapter *adapter) | 
|  | { | 
|  | WARN_ON(in_interrupt()); | 
|  | atl1c_down(adapter); | 
|  | atl1c_up(adapter); | 
|  | clear_bit(__AT_RESETTING, &adapter->flags); | 
|  | } | 
|  |  | 
|  | static void atl1c_check_link_status(struct atl1c_adapter *adapter) | 
|  | { | 
|  | struct atl1c_hw *hw = &adapter->hw; | 
|  | struct net_device *netdev = adapter->netdev; | 
|  | struct pci_dev    *pdev   = adapter->pdev; | 
|  | int err; | 
|  | unsigned long flags; | 
|  | u16 speed, duplex, phy_data; | 
|  |  | 
|  | spin_lock_irqsave(&adapter->mdio_lock, flags); | 
|  | /* MII_BMSR must read twise */ | 
|  | atl1c_read_phy_reg(hw, MII_BMSR, &phy_data); | 
|  | atl1c_read_phy_reg(hw, MII_BMSR, &phy_data); | 
|  | spin_unlock_irqrestore(&adapter->mdio_lock, flags); | 
|  |  | 
|  | if ((phy_data & BMSR_LSTATUS) == 0) { | 
|  | /* link down */ | 
|  | hw->hibernate = true; | 
|  | if (atl1c_stop_mac(hw) != 0) | 
|  | if (netif_msg_hw(adapter)) | 
|  | dev_warn(&pdev->dev, "stop mac failed\n"); | 
|  | atl1c_set_aspm(hw, false); | 
|  | netif_carrier_off(netdev); | 
|  | netif_stop_queue(netdev); | 
|  | atl1c_phy_reset(hw); | 
|  | atl1c_phy_init(&adapter->hw); | 
|  | } else { | 
|  | /* Link Up */ | 
|  | hw->hibernate = false; | 
|  | spin_lock_irqsave(&adapter->mdio_lock, flags); | 
|  | err = atl1c_get_speed_and_duplex(hw, &speed, &duplex); | 
|  | spin_unlock_irqrestore(&adapter->mdio_lock, flags); | 
|  | if (unlikely(err)) | 
|  | return; | 
|  | /* link result is our setting */ | 
|  | if (adapter->link_speed != speed || | 
|  | adapter->link_duplex != duplex) { | 
|  | adapter->link_speed  = speed; | 
|  | adapter->link_duplex = duplex; | 
|  | atl1c_set_aspm(hw, true); | 
|  | atl1c_enable_tx_ctrl(hw); | 
|  | atl1c_enable_rx_ctrl(hw); | 
|  | atl1c_setup_mac_ctrl(adapter); | 
|  | if (netif_msg_link(adapter)) | 
|  | dev_info(&pdev->dev, | 
|  | "%s: %s NIC Link is Up<%d Mbps %s>\n", | 
|  | atl1c_driver_name, netdev->name, | 
|  | adapter->link_speed, | 
|  | adapter->link_duplex == FULL_DUPLEX ? | 
|  | "Full Duplex" : "Half Duplex"); | 
|  | } | 
|  | if (!netif_carrier_ok(netdev)) | 
|  | netif_carrier_on(netdev); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void atl1c_link_chg_event(struct atl1c_adapter *adapter) | 
|  | { | 
|  | struct net_device *netdev = adapter->netdev; | 
|  | struct pci_dev    *pdev   = adapter->pdev; | 
|  | u16 phy_data; | 
|  | u16 link_up; | 
|  |  | 
|  | spin_lock(&adapter->mdio_lock); | 
|  | atl1c_read_phy_reg(&adapter->hw, MII_BMSR, &phy_data); | 
|  | atl1c_read_phy_reg(&adapter->hw, MII_BMSR, &phy_data); | 
|  | spin_unlock(&adapter->mdio_lock); | 
|  | link_up = phy_data & BMSR_LSTATUS; | 
|  | /* notify upper layer link down ASAP */ | 
|  | if (!link_up) { | 
|  | if (netif_carrier_ok(netdev)) { | 
|  | /* old link state: Up */ | 
|  | netif_carrier_off(netdev); | 
|  | if (netif_msg_link(adapter)) | 
|  | dev_info(&pdev->dev, | 
|  | "%s: %s NIC Link is Down\n", | 
|  | atl1c_driver_name, netdev->name); | 
|  | adapter->link_speed = SPEED_0; | 
|  | } | 
|  | } | 
|  |  | 
|  | set_bit(ATL1C_WORK_EVENT_LINK_CHANGE, &adapter->work_event); | 
|  | schedule_work(&adapter->common_task); | 
|  | } | 
|  |  | 
|  | static void atl1c_common_task(struct work_struct *work) | 
|  | { | 
|  | struct atl1c_adapter *adapter; | 
|  | struct net_device *netdev; | 
|  |  | 
|  | adapter = container_of(work, struct atl1c_adapter, common_task); | 
|  | netdev = adapter->netdev; | 
|  |  | 
|  | if (test_and_clear_bit(ATL1C_WORK_EVENT_RESET, &adapter->work_event)) { | 
|  | netif_device_detach(netdev); | 
|  | atl1c_down(adapter); | 
|  | atl1c_up(adapter); | 
|  | netif_device_attach(netdev); | 
|  | } | 
|  |  | 
|  | if (test_and_clear_bit(ATL1C_WORK_EVENT_LINK_CHANGE, | 
|  | &adapter->work_event)) | 
|  | atl1c_check_link_status(adapter); | 
|  | } | 
|  |  | 
|  |  | 
|  | static void atl1c_del_timer(struct atl1c_adapter *adapter) | 
|  | { | 
|  | del_timer_sync(&adapter->phy_config_timer); | 
|  | } | 
|  |  | 
|  |  | 
|  | /* | 
|  | * atl1c_tx_timeout - Respond to a Tx Hang | 
|  | * @netdev: network interface device structure | 
|  | */ | 
|  | static void atl1c_tx_timeout(struct net_device *netdev) | 
|  | { | 
|  | struct atl1c_adapter *adapter = netdev_priv(netdev); | 
|  |  | 
|  | /* Do the reset outside of interrupt context */ | 
|  | set_bit(ATL1C_WORK_EVENT_RESET, &adapter->work_event); | 
|  | schedule_work(&adapter->common_task); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * atl1c_set_multi - Multicast and Promiscuous mode set | 
|  | * @netdev: network interface device structure | 
|  | * | 
|  | * The set_multi entry point is called whenever the multicast address | 
|  | * list or the network interface flags are updated.  This routine is | 
|  | * responsible for configuring the hardware for proper multicast, | 
|  | * promiscuous mode, and all-multi behavior. | 
|  | */ | 
|  | static void atl1c_set_multi(struct net_device *netdev) | 
|  | { | 
|  | struct atl1c_adapter *adapter = netdev_priv(netdev); | 
|  | struct atl1c_hw *hw = &adapter->hw; | 
|  | struct netdev_hw_addr *ha; | 
|  | u32 mac_ctrl_data; | 
|  | u32 hash_value; | 
|  |  | 
|  | /* Check for Promiscuous and All Multicast modes */ | 
|  | AT_READ_REG(hw, REG_MAC_CTRL, &mac_ctrl_data); | 
|  |  | 
|  | if (netdev->flags & IFF_PROMISC) { | 
|  | mac_ctrl_data |= MAC_CTRL_PROMIS_EN; | 
|  | } else if (netdev->flags & IFF_ALLMULTI) { | 
|  | mac_ctrl_data |= MAC_CTRL_MC_ALL_EN; | 
|  | mac_ctrl_data &= ~MAC_CTRL_PROMIS_EN; | 
|  | } else { | 
|  | mac_ctrl_data &= ~(MAC_CTRL_PROMIS_EN | MAC_CTRL_MC_ALL_EN); | 
|  | } | 
|  |  | 
|  | AT_WRITE_REG(hw, REG_MAC_CTRL, mac_ctrl_data); | 
|  |  | 
|  | /* clear the old settings from the multicast hash table */ | 
|  | AT_WRITE_REG(hw, REG_RX_HASH_TABLE, 0); | 
|  | AT_WRITE_REG_ARRAY(hw, REG_RX_HASH_TABLE, 1, 0); | 
|  |  | 
|  | /* comoute mc addresses' hash value ,and put it into hash table */ | 
|  | netdev_for_each_mc_addr(ha, netdev) { | 
|  | hash_value = atl1c_hash_mc_addr(hw, ha->addr); | 
|  | atl1c_hash_set(hw, hash_value); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void __atl1c_vlan_mode(u32 features, u32 *mac_ctrl_data) | 
|  | { | 
|  | if (features & NETIF_F_HW_VLAN_RX) { | 
|  | /* enable VLAN tag insert/strip */ | 
|  | *mac_ctrl_data |= MAC_CTRL_RMV_VLAN; | 
|  | } else { | 
|  | /* disable VLAN tag insert/strip */ | 
|  | *mac_ctrl_data &= ~MAC_CTRL_RMV_VLAN; | 
|  | } | 
|  | } | 
|  |  | 
|  | static void atl1c_vlan_mode(struct net_device *netdev, u32 features) | 
|  | { | 
|  | struct atl1c_adapter *adapter = netdev_priv(netdev); | 
|  | struct pci_dev *pdev = adapter->pdev; | 
|  | u32 mac_ctrl_data = 0; | 
|  |  | 
|  | if (netif_msg_pktdata(adapter)) | 
|  | dev_dbg(&pdev->dev, "atl1c_vlan_mode\n"); | 
|  |  | 
|  | atl1c_irq_disable(adapter); | 
|  | AT_READ_REG(&adapter->hw, REG_MAC_CTRL, &mac_ctrl_data); | 
|  | __atl1c_vlan_mode(features, &mac_ctrl_data); | 
|  | AT_WRITE_REG(&adapter->hw, REG_MAC_CTRL, mac_ctrl_data); | 
|  | atl1c_irq_enable(adapter); | 
|  | } | 
|  |  | 
|  | static void atl1c_restore_vlan(struct atl1c_adapter *adapter) | 
|  | { | 
|  | struct pci_dev *pdev = adapter->pdev; | 
|  |  | 
|  | if (netif_msg_pktdata(adapter)) | 
|  | dev_dbg(&pdev->dev, "atl1c_restore_vlan\n"); | 
|  | atl1c_vlan_mode(adapter->netdev, adapter->netdev->features); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * atl1c_set_mac - Change the Ethernet Address of the NIC | 
|  | * @netdev: network interface device structure | 
|  | * @p: pointer to an address structure | 
|  | * | 
|  | * Returns 0 on success, negative on failure | 
|  | */ | 
|  | static int atl1c_set_mac_addr(struct net_device *netdev, void *p) | 
|  | { | 
|  | struct atl1c_adapter *adapter = netdev_priv(netdev); | 
|  | struct sockaddr *addr = p; | 
|  |  | 
|  | if (!is_valid_ether_addr(addr->sa_data)) | 
|  | return -EADDRNOTAVAIL; | 
|  |  | 
|  | if (netif_running(netdev)) | 
|  | return -EBUSY; | 
|  |  | 
|  | memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len); | 
|  | memcpy(adapter->hw.mac_addr, addr->sa_data, netdev->addr_len); | 
|  |  | 
|  | atl1c_hw_set_mac_addr(&adapter->hw); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void atl1c_set_rxbufsize(struct atl1c_adapter *adapter, | 
|  | struct net_device *dev) | 
|  | { | 
|  | int mtu = dev->mtu; | 
|  |  | 
|  | adapter->rx_buffer_len = mtu > AT_RX_BUF_SIZE ? | 
|  | roundup(mtu + ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN, 8) : AT_RX_BUF_SIZE; | 
|  | } | 
|  |  | 
|  | static u32 atl1c_fix_features(struct net_device *netdev, u32 features) | 
|  | { | 
|  | /* | 
|  | * Since there is no support for separate rx/tx vlan accel | 
|  | * enable/disable make sure tx flag is always in same state as rx. | 
|  | */ | 
|  | if (features & NETIF_F_HW_VLAN_RX) | 
|  | features |= NETIF_F_HW_VLAN_TX; | 
|  | else | 
|  | features &= ~NETIF_F_HW_VLAN_TX; | 
|  |  | 
|  | if (netdev->mtu > MAX_TSO_FRAME_SIZE) | 
|  | features &= ~(NETIF_F_TSO | NETIF_F_TSO6); | 
|  |  | 
|  | return features; | 
|  | } | 
|  |  | 
|  | static int atl1c_set_features(struct net_device *netdev, u32 features) | 
|  | { | 
|  | u32 changed = netdev->features ^ features; | 
|  |  | 
|  | if (changed & NETIF_F_HW_VLAN_RX) | 
|  | atl1c_vlan_mode(netdev, features); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * atl1c_change_mtu - Change the Maximum Transfer Unit | 
|  | * @netdev: network interface device structure | 
|  | * @new_mtu: new value for maximum frame size | 
|  | * | 
|  | * Returns 0 on success, negative on failure | 
|  | */ | 
|  | static int atl1c_change_mtu(struct net_device *netdev, int new_mtu) | 
|  | { | 
|  | struct atl1c_adapter *adapter = netdev_priv(netdev); | 
|  | int old_mtu   = netdev->mtu; | 
|  | int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN; | 
|  |  | 
|  | if ((max_frame < ETH_ZLEN + ETH_FCS_LEN) || | 
|  | (max_frame > MAX_JUMBO_FRAME_SIZE)) { | 
|  | if (netif_msg_link(adapter)) | 
|  | dev_warn(&adapter->pdev->dev, "invalid MTU setting\n"); | 
|  | return -EINVAL; | 
|  | } | 
|  | /* set MTU */ | 
|  | if (old_mtu != new_mtu && netif_running(netdev)) { | 
|  | while (test_and_set_bit(__AT_RESETTING, &adapter->flags)) | 
|  | msleep(1); | 
|  | netdev->mtu = new_mtu; | 
|  | adapter->hw.max_frame_size = new_mtu; | 
|  | atl1c_set_rxbufsize(adapter, netdev); | 
|  | atl1c_down(adapter); | 
|  | netdev_update_features(netdev); | 
|  | atl1c_up(adapter); | 
|  | clear_bit(__AT_RESETTING, &adapter->flags); | 
|  | if (adapter->hw.ctrl_flags & ATL1C_FPGA_VERSION) { | 
|  | u32 phy_data; | 
|  |  | 
|  | AT_READ_REG(&adapter->hw, 0x1414, &phy_data); | 
|  | phy_data |= 0x10000000; | 
|  | AT_WRITE_REG(&adapter->hw, 0x1414, phy_data); | 
|  | } | 
|  |  | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | *  caller should hold mdio_lock | 
|  | */ | 
|  | static int atl1c_mdio_read(struct net_device *netdev, int phy_id, int reg_num) | 
|  | { | 
|  | struct atl1c_adapter *adapter = netdev_priv(netdev); | 
|  | u16 result; | 
|  |  | 
|  | atl1c_read_phy_reg(&adapter->hw, reg_num & MDIO_REG_ADDR_MASK, &result); | 
|  | return result; | 
|  | } | 
|  |  | 
|  | static void atl1c_mdio_write(struct net_device *netdev, int phy_id, | 
|  | int reg_num, int val) | 
|  | { | 
|  | struct atl1c_adapter *adapter = netdev_priv(netdev); | 
|  |  | 
|  | atl1c_write_phy_reg(&adapter->hw, reg_num & MDIO_REG_ADDR_MASK, val); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * atl1c_mii_ioctl - | 
|  | * @netdev: | 
|  | * @ifreq: | 
|  | * @cmd: | 
|  | */ | 
|  | static int atl1c_mii_ioctl(struct net_device *netdev, | 
|  | struct ifreq *ifr, int cmd) | 
|  | { | 
|  | struct atl1c_adapter *adapter = netdev_priv(netdev); | 
|  | struct pci_dev *pdev = adapter->pdev; | 
|  | struct mii_ioctl_data *data = if_mii(ifr); | 
|  | unsigned long flags; | 
|  | int retval = 0; | 
|  |  | 
|  | if (!netif_running(netdev)) | 
|  | return -EINVAL; | 
|  |  | 
|  | spin_lock_irqsave(&adapter->mdio_lock, flags); | 
|  | switch (cmd) { | 
|  | case SIOCGMIIPHY: | 
|  | data->phy_id = 0; | 
|  | break; | 
|  |  | 
|  | case SIOCGMIIREG: | 
|  | if (atl1c_read_phy_reg(&adapter->hw, data->reg_num & 0x1F, | 
|  | &data->val_out)) { | 
|  | retval = -EIO; | 
|  | goto out; | 
|  | } | 
|  | break; | 
|  |  | 
|  | case SIOCSMIIREG: | 
|  | if (data->reg_num & ~(0x1F)) { | 
|  | retval = -EFAULT; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | dev_dbg(&pdev->dev, "<atl1c_mii_ioctl> write %x %x", | 
|  | data->reg_num, data->val_in); | 
|  | if (atl1c_write_phy_reg(&adapter->hw, | 
|  | data->reg_num, data->val_in)) { | 
|  | retval = -EIO; | 
|  | goto out; | 
|  | } | 
|  | break; | 
|  |  | 
|  | default: | 
|  | retval = -EOPNOTSUPP; | 
|  | break; | 
|  | } | 
|  | out: | 
|  | spin_unlock_irqrestore(&adapter->mdio_lock, flags); | 
|  | return retval; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * atl1c_ioctl - | 
|  | * @netdev: | 
|  | * @ifreq: | 
|  | * @cmd: | 
|  | */ | 
|  | static int atl1c_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) | 
|  | { | 
|  | switch (cmd) { | 
|  | case SIOCGMIIPHY: | 
|  | case SIOCGMIIREG: | 
|  | case SIOCSMIIREG: | 
|  | return atl1c_mii_ioctl(netdev, ifr, cmd); | 
|  | default: | 
|  | return -EOPNOTSUPP; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * atl1c_alloc_queues - Allocate memory for all rings | 
|  | * @adapter: board private structure to initialize | 
|  | * | 
|  | */ | 
|  | static int __devinit atl1c_alloc_queues(struct atl1c_adapter *adapter) | 
|  | { | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void atl1c_set_mac_type(struct atl1c_hw *hw) | 
|  | { | 
|  | switch (hw->device_id) { | 
|  | case PCI_DEVICE_ID_ATTANSIC_L2C: | 
|  | hw->nic_type = athr_l2c; | 
|  | break; | 
|  | case PCI_DEVICE_ID_ATTANSIC_L1C: | 
|  | hw->nic_type = athr_l1c; | 
|  | break; | 
|  | case PCI_DEVICE_ID_ATHEROS_L2C_B: | 
|  | hw->nic_type = athr_l2c_b; | 
|  | break; | 
|  | case PCI_DEVICE_ID_ATHEROS_L2C_B2: | 
|  | hw->nic_type = athr_l2c_b2; | 
|  | break; | 
|  | case PCI_DEVICE_ID_ATHEROS_L1D: | 
|  | hw->nic_type = athr_l1d; | 
|  | break; | 
|  | case PCI_DEVICE_ID_ATHEROS_L1D_2_0: | 
|  | hw->nic_type = athr_l1d_2; | 
|  | break; | 
|  | default: | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | static int atl1c_setup_mac_funcs(struct atl1c_hw *hw) | 
|  | { | 
|  | u32 phy_status_data; | 
|  | u32 link_ctrl_data; | 
|  |  | 
|  | atl1c_set_mac_type(hw); | 
|  | AT_READ_REG(hw, REG_PHY_STATUS, &phy_status_data); | 
|  | AT_READ_REG(hw, REG_LINK_CTRL, &link_ctrl_data); | 
|  |  | 
|  | hw->ctrl_flags = ATL1C_INTR_MODRT_ENABLE  | | 
|  | ATL1C_TXQ_MODE_ENHANCE; | 
|  | if (link_ctrl_data & LINK_CTRL_L0S_EN) | 
|  | hw->ctrl_flags |= ATL1C_ASPM_L0S_SUPPORT; | 
|  | if (link_ctrl_data & LINK_CTRL_L1_EN) | 
|  | hw->ctrl_flags |= ATL1C_ASPM_L1_SUPPORT; | 
|  | if (link_ctrl_data & LINK_CTRL_EXT_SYNC) | 
|  | hw->ctrl_flags |= ATL1C_LINK_EXT_SYNC; | 
|  | hw->ctrl_flags |= ATL1C_ASPM_CTRL_MON; | 
|  |  | 
|  | if (hw->nic_type == athr_l1c || | 
|  | hw->nic_type == athr_l1d || | 
|  | hw->nic_type == athr_l1d_2) | 
|  | hw->link_cap_flags |= ATL1C_LINK_CAP_1000M; | 
|  | return 0; | 
|  | } | 
|  | /* | 
|  | * atl1c_sw_init - Initialize general software structures (struct atl1c_adapter) | 
|  | * @adapter: board private structure to initialize | 
|  | * | 
|  | * atl1c_sw_init initializes the Adapter private data structure. | 
|  | * Fields are initialized based on PCI device information and | 
|  | * OS network device settings (MTU size). | 
|  | */ | 
|  | static int __devinit atl1c_sw_init(struct atl1c_adapter *adapter) | 
|  | { | 
|  | struct atl1c_hw *hw   = &adapter->hw; | 
|  | struct pci_dev	*pdev = adapter->pdev; | 
|  | u32 revision; | 
|  |  | 
|  |  | 
|  | adapter->wol = 0; | 
|  | device_set_wakeup_enable(&pdev->dev, false); | 
|  | adapter->link_speed = SPEED_0; | 
|  | adapter->link_duplex = FULL_DUPLEX; | 
|  | adapter->num_rx_queues = AT_DEF_RECEIVE_QUEUE; | 
|  | adapter->tpd_ring[0].count = 1024; | 
|  | adapter->rfd_ring[0].count = 512; | 
|  |  | 
|  | hw->vendor_id = pdev->vendor; | 
|  | hw->device_id = pdev->device; | 
|  | hw->subsystem_vendor_id = pdev->subsystem_vendor; | 
|  | hw->subsystem_id = pdev->subsystem_device; | 
|  | AT_READ_REG(hw, PCI_CLASS_REVISION, &revision); | 
|  | hw->revision_id = revision & 0xFF; | 
|  | /* before link up, we assume hibernate is true */ | 
|  | hw->hibernate = true; | 
|  | hw->media_type = MEDIA_TYPE_AUTO_SENSOR; | 
|  | if (atl1c_setup_mac_funcs(hw) != 0) { | 
|  | dev_err(&pdev->dev, "set mac function pointers failed\n"); | 
|  | return -1; | 
|  | } | 
|  | hw->intr_mask = IMR_NORMAL_MASK; | 
|  | hw->phy_configured = false; | 
|  | hw->preamble_len = 7; | 
|  | hw->max_frame_size = adapter->netdev->mtu; | 
|  | if (adapter->num_rx_queues < 2) { | 
|  | hw->rss_type = atl1c_rss_disable; | 
|  | hw->rss_mode = atl1c_rss_mode_disable; | 
|  | } else { | 
|  | hw->rss_type = atl1c_rss_ipv4; | 
|  | hw->rss_mode = atl1c_rss_mul_que_mul_int; | 
|  | hw->rss_hash_bits = 16; | 
|  | } | 
|  | hw->autoneg_advertised = ADVERTISED_Autoneg; | 
|  | hw->indirect_tab = 0xE4E4E4E4; | 
|  | hw->base_cpu = 0; | 
|  |  | 
|  | hw->ict = 50000;		/* 100ms */ | 
|  | hw->smb_timer = 200000;	  	/* 400ms */ | 
|  | hw->cmb_tpd = 4; | 
|  | hw->cmb_tx_timer = 1;		/* 2 us  */ | 
|  | hw->rx_imt = 200; | 
|  | hw->tx_imt = 1000; | 
|  |  | 
|  | hw->tpd_burst = 5; | 
|  | hw->rfd_burst = 8; | 
|  | hw->dma_order = atl1c_dma_ord_out; | 
|  | hw->dmar_block = atl1c_dma_req_1024; | 
|  | hw->dmaw_block = atl1c_dma_req_1024; | 
|  | hw->dmar_dly_cnt = 15; | 
|  | hw->dmaw_dly_cnt = 4; | 
|  |  | 
|  | if (atl1c_alloc_queues(adapter)) { | 
|  | dev_err(&pdev->dev, "Unable to allocate memory for queues\n"); | 
|  | return -ENOMEM; | 
|  | } | 
|  | /* TODO */ | 
|  | atl1c_set_rxbufsize(adapter, adapter->netdev); | 
|  | atomic_set(&adapter->irq_sem, 1); | 
|  | spin_lock_init(&adapter->mdio_lock); | 
|  | spin_lock_init(&adapter->tx_lock); | 
|  | set_bit(__AT_DOWN, &adapter->flags); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static inline void atl1c_clean_buffer(struct pci_dev *pdev, | 
|  | struct atl1c_buffer *buffer_info, int in_irq) | 
|  | { | 
|  | u16 pci_driection; | 
|  | if (buffer_info->flags & ATL1C_BUFFER_FREE) | 
|  | return; | 
|  | if (buffer_info->dma) { | 
|  | if (buffer_info->flags & ATL1C_PCIMAP_FROMDEVICE) | 
|  | pci_driection = PCI_DMA_FROMDEVICE; | 
|  | else | 
|  | pci_driection = PCI_DMA_TODEVICE; | 
|  |  | 
|  | if (buffer_info->flags & ATL1C_PCIMAP_SINGLE) | 
|  | pci_unmap_single(pdev, buffer_info->dma, | 
|  | buffer_info->length, pci_driection); | 
|  | else if (buffer_info->flags & ATL1C_PCIMAP_PAGE) | 
|  | pci_unmap_page(pdev, buffer_info->dma, | 
|  | buffer_info->length, pci_driection); | 
|  | } | 
|  | if (buffer_info->skb) { | 
|  | if (in_irq) | 
|  | dev_kfree_skb_irq(buffer_info->skb); | 
|  | else | 
|  | dev_kfree_skb(buffer_info->skb); | 
|  | } | 
|  | buffer_info->dma = 0; | 
|  | buffer_info->skb = NULL; | 
|  | ATL1C_SET_BUFFER_STATE(buffer_info, ATL1C_BUFFER_FREE); | 
|  | } | 
|  | /* | 
|  | * atl1c_clean_tx_ring - Free Tx-skb | 
|  | * @adapter: board private structure | 
|  | */ | 
|  | static void atl1c_clean_tx_ring(struct atl1c_adapter *adapter, | 
|  | enum atl1c_trans_queue type) | 
|  | { | 
|  | struct atl1c_tpd_ring *tpd_ring = &adapter->tpd_ring[type]; | 
|  | struct atl1c_buffer *buffer_info; | 
|  | struct pci_dev *pdev = adapter->pdev; | 
|  | u16 index, ring_count; | 
|  |  | 
|  | ring_count = tpd_ring->count; | 
|  | for (index = 0; index < ring_count; index++) { | 
|  | buffer_info = &tpd_ring->buffer_info[index]; | 
|  | atl1c_clean_buffer(pdev, buffer_info, 0); | 
|  | } | 
|  |  | 
|  | /* Zero out Tx-buffers */ | 
|  | memset(tpd_ring->desc, 0, sizeof(struct atl1c_tpd_desc) * | 
|  | ring_count); | 
|  | atomic_set(&tpd_ring->next_to_clean, 0); | 
|  | tpd_ring->next_to_use = 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * atl1c_clean_rx_ring - Free rx-reservation skbs | 
|  | * @adapter: board private structure | 
|  | */ | 
|  | static void atl1c_clean_rx_ring(struct atl1c_adapter *adapter) | 
|  | { | 
|  | struct atl1c_rfd_ring *rfd_ring = adapter->rfd_ring; | 
|  | struct atl1c_rrd_ring *rrd_ring = adapter->rrd_ring; | 
|  | struct atl1c_buffer *buffer_info; | 
|  | struct pci_dev *pdev = adapter->pdev; | 
|  | int i, j; | 
|  |  | 
|  | for (i = 0; i < adapter->num_rx_queues; i++) { | 
|  | for (j = 0; j < rfd_ring[i].count; j++) { | 
|  | buffer_info = &rfd_ring[i].buffer_info[j]; | 
|  | atl1c_clean_buffer(pdev, buffer_info, 0); | 
|  | } | 
|  | /* zero out the descriptor ring */ | 
|  | memset(rfd_ring[i].desc, 0, rfd_ring[i].size); | 
|  | rfd_ring[i].next_to_clean = 0; | 
|  | rfd_ring[i].next_to_use = 0; | 
|  | rrd_ring[i].next_to_use = 0; | 
|  | rrd_ring[i].next_to_clean = 0; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Read / Write Ptr Initialize: | 
|  | */ | 
|  | static void atl1c_init_ring_ptrs(struct atl1c_adapter *adapter) | 
|  | { | 
|  | struct atl1c_tpd_ring *tpd_ring = adapter->tpd_ring; | 
|  | struct atl1c_rfd_ring *rfd_ring = adapter->rfd_ring; | 
|  | struct atl1c_rrd_ring *rrd_ring = adapter->rrd_ring; | 
|  | struct atl1c_buffer *buffer_info; | 
|  | int i, j; | 
|  |  | 
|  | for (i = 0; i < AT_MAX_TRANSMIT_QUEUE; i++) { | 
|  | tpd_ring[i].next_to_use = 0; | 
|  | atomic_set(&tpd_ring[i].next_to_clean, 0); | 
|  | buffer_info = tpd_ring[i].buffer_info; | 
|  | for (j = 0; j < tpd_ring->count; j++) | 
|  | ATL1C_SET_BUFFER_STATE(&buffer_info[i], | 
|  | ATL1C_BUFFER_FREE); | 
|  | } | 
|  | for (i = 0; i < adapter->num_rx_queues; i++) { | 
|  | rfd_ring[i].next_to_use = 0; | 
|  | rfd_ring[i].next_to_clean = 0; | 
|  | rrd_ring[i].next_to_use = 0; | 
|  | rrd_ring[i].next_to_clean = 0; | 
|  | for (j = 0; j < rfd_ring[i].count; j++) { | 
|  | buffer_info = &rfd_ring[i].buffer_info[j]; | 
|  | ATL1C_SET_BUFFER_STATE(buffer_info, ATL1C_BUFFER_FREE); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * atl1c_free_ring_resources - Free Tx / RX descriptor Resources | 
|  | * @adapter: board private structure | 
|  | * | 
|  | * Free all transmit software resources | 
|  | */ | 
|  | static void atl1c_free_ring_resources(struct atl1c_adapter *adapter) | 
|  | { | 
|  | struct pci_dev *pdev = adapter->pdev; | 
|  |  | 
|  | pci_free_consistent(pdev, adapter->ring_header.size, | 
|  | adapter->ring_header.desc, | 
|  | adapter->ring_header.dma); | 
|  | adapter->ring_header.desc = NULL; | 
|  |  | 
|  | /* Note: just free tdp_ring.buffer_info, | 
|  | *  it contain rfd_ring.buffer_info, do not double free */ | 
|  | if (adapter->tpd_ring[0].buffer_info) { | 
|  | kfree(adapter->tpd_ring[0].buffer_info); | 
|  | adapter->tpd_ring[0].buffer_info = NULL; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * atl1c_setup_mem_resources - allocate Tx / RX descriptor resources | 
|  | * @adapter: board private structure | 
|  | * | 
|  | * Return 0 on success, negative on failure | 
|  | */ | 
|  | static int atl1c_setup_ring_resources(struct atl1c_adapter *adapter) | 
|  | { | 
|  | struct pci_dev *pdev = adapter->pdev; | 
|  | struct atl1c_tpd_ring *tpd_ring = adapter->tpd_ring; | 
|  | struct atl1c_rfd_ring *rfd_ring = adapter->rfd_ring; | 
|  | struct atl1c_rrd_ring *rrd_ring = adapter->rrd_ring; | 
|  | struct atl1c_ring_header *ring_header = &adapter->ring_header; | 
|  | int num_rx_queues = adapter->num_rx_queues; | 
|  | int size; | 
|  | int i; | 
|  | int count = 0; | 
|  | int rx_desc_count = 0; | 
|  | u32 offset = 0; | 
|  |  | 
|  | rrd_ring[0].count = rfd_ring[0].count; | 
|  | for (i = 1; i < AT_MAX_TRANSMIT_QUEUE; i++) | 
|  | tpd_ring[i].count = tpd_ring[0].count; | 
|  |  | 
|  | for (i = 1; i < adapter->num_rx_queues; i++) | 
|  | rfd_ring[i].count = rrd_ring[i].count = rfd_ring[0].count; | 
|  |  | 
|  | /* 2 tpd queue, one high priority queue, | 
|  | * another normal priority queue */ | 
|  | size = sizeof(struct atl1c_buffer) * (tpd_ring->count * 2 + | 
|  | rfd_ring->count * num_rx_queues); | 
|  | tpd_ring->buffer_info = kzalloc(size, GFP_KERNEL); | 
|  | if (unlikely(!tpd_ring->buffer_info)) { | 
|  | dev_err(&pdev->dev, "kzalloc failed, size = %d\n", | 
|  | size); | 
|  | goto err_nomem; | 
|  | } | 
|  | for (i = 0; i < AT_MAX_TRANSMIT_QUEUE; i++) { | 
|  | tpd_ring[i].buffer_info = | 
|  | (struct atl1c_buffer *) (tpd_ring->buffer_info + count); | 
|  | count += tpd_ring[i].count; | 
|  | } | 
|  |  | 
|  | for (i = 0; i < num_rx_queues; i++) { | 
|  | rfd_ring[i].buffer_info = | 
|  | (struct atl1c_buffer *) (tpd_ring->buffer_info + count); | 
|  | count += rfd_ring[i].count; | 
|  | rx_desc_count += rfd_ring[i].count; | 
|  | } | 
|  | /* | 
|  | * real ring DMA buffer | 
|  | * each ring/block may need up to 8 bytes for alignment, hence the | 
|  | * additional bytes tacked onto the end. | 
|  | */ | 
|  | ring_header->size = size = | 
|  | sizeof(struct atl1c_tpd_desc) * tpd_ring->count * 2 + | 
|  | sizeof(struct atl1c_rx_free_desc) * rx_desc_count + | 
|  | sizeof(struct atl1c_recv_ret_status) * rx_desc_count + | 
|  | sizeof(struct atl1c_hw_stats) + | 
|  | 8 * 4 + 8 * 2 * num_rx_queues; | 
|  |  | 
|  | ring_header->desc = pci_alloc_consistent(pdev, ring_header->size, | 
|  | &ring_header->dma); | 
|  | if (unlikely(!ring_header->desc)) { | 
|  | dev_err(&pdev->dev, "pci_alloc_consistend failed\n"); | 
|  | goto err_nomem; | 
|  | } | 
|  | memset(ring_header->desc, 0, ring_header->size); | 
|  | /* init TPD ring */ | 
|  |  | 
|  | tpd_ring[0].dma = roundup(ring_header->dma, 8); | 
|  | offset = tpd_ring[0].dma - ring_header->dma; | 
|  | for (i = 0; i < AT_MAX_TRANSMIT_QUEUE; i++) { | 
|  | tpd_ring[i].dma = ring_header->dma + offset; | 
|  | tpd_ring[i].desc = (u8 *) ring_header->desc + offset; | 
|  | tpd_ring[i].size = | 
|  | sizeof(struct atl1c_tpd_desc) * tpd_ring[i].count; | 
|  | offset += roundup(tpd_ring[i].size, 8); | 
|  | } | 
|  | /* init RFD ring */ | 
|  | for (i = 0; i < num_rx_queues; i++) { | 
|  | rfd_ring[i].dma = ring_header->dma + offset; | 
|  | rfd_ring[i].desc = (u8 *) ring_header->desc + offset; | 
|  | rfd_ring[i].size = sizeof(struct atl1c_rx_free_desc) * | 
|  | rfd_ring[i].count; | 
|  | offset += roundup(rfd_ring[i].size, 8); | 
|  | } | 
|  |  | 
|  | /* init RRD ring */ | 
|  | for (i = 0; i < num_rx_queues; i++) { | 
|  | rrd_ring[i].dma = ring_header->dma + offset; | 
|  | rrd_ring[i].desc = (u8 *) ring_header->desc + offset; | 
|  | rrd_ring[i].size = sizeof(struct atl1c_recv_ret_status) * | 
|  | rrd_ring[i].count; | 
|  | offset += roundup(rrd_ring[i].size, 8); | 
|  | } | 
|  |  | 
|  | adapter->smb.dma = ring_header->dma + offset; | 
|  | adapter->smb.smb = (u8 *)ring_header->desc + offset; | 
|  | return 0; | 
|  |  | 
|  | err_nomem: | 
|  | kfree(tpd_ring->buffer_info); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | static void atl1c_configure_des_ring(struct atl1c_adapter *adapter) | 
|  | { | 
|  | struct atl1c_hw *hw = &adapter->hw; | 
|  | struct atl1c_rfd_ring *rfd_ring = (struct atl1c_rfd_ring *) | 
|  | adapter->rfd_ring; | 
|  | struct atl1c_rrd_ring *rrd_ring = (struct atl1c_rrd_ring *) | 
|  | adapter->rrd_ring; | 
|  | struct atl1c_tpd_ring *tpd_ring = (struct atl1c_tpd_ring *) | 
|  | adapter->tpd_ring; | 
|  | struct atl1c_cmb *cmb = (struct atl1c_cmb *) &adapter->cmb; | 
|  | struct atl1c_smb *smb = (struct atl1c_smb *) &adapter->smb; | 
|  | int i; | 
|  | u32 data; | 
|  |  | 
|  | /* TPD */ | 
|  | AT_WRITE_REG(hw, REG_TX_BASE_ADDR_HI, | 
|  | (u32)((tpd_ring[atl1c_trans_normal].dma & | 
|  | AT_DMA_HI_ADDR_MASK) >> 32)); | 
|  | /* just enable normal priority TX queue */ | 
|  | AT_WRITE_REG(hw, REG_NTPD_HEAD_ADDR_LO, | 
|  | (u32)(tpd_ring[atl1c_trans_normal].dma & | 
|  | AT_DMA_LO_ADDR_MASK)); | 
|  | AT_WRITE_REG(hw, REG_HTPD_HEAD_ADDR_LO, | 
|  | (u32)(tpd_ring[atl1c_trans_high].dma & | 
|  | AT_DMA_LO_ADDR_MASK)); | 
|  | AT_WRITE_REG(hw, REG_TPD_RING_SIZE, | 
|  | (u32)(tpd_ring[0].count & TPD_RING_SIZE_MASK)); | 
|  |  | 
|  |  | 
|  | /* RFD */ | 
|  | AT_WRITE_REG(hw, REG_RX_BASE_ADDR_HI, | 
|  | (u32)((rfd_ring[0].dma & AT_DMA_HI_ADDR_MASK) >> 32)); | 
|  | for (i = 0; i < adapter->num_rx_queues; i++) | 
|  | AT_WRITE_REG(hw, atl1c_rfd_addr_lo_regs[i], | 
|  | (u32)(rfd_ring[i].dma & AT_DMA_LO_ADDR_MASK)); | 
|  |  | 
|  | AT_WRITE_REG(hw, REG_RFD_RING_SIZE, | 
|  | rfd_ring[0].count & RFD_RING_SIZE_MASK); | 
|  | AT_WRITE_REG(hw, REG_RX_BUF_SIZE, | 
|  | adapter->rx_buffer_len & RX_BUF_SIZE_MASK); | 
|  |  | 
|  | /* RRD */ | 
|  | for (i = 0; i < adapter->num_rx_queues; i++) | 
|  | AT_WRITE_REG(hw, atl1c_rrd_addr_lo_regs[i], | 
|  | (u32)(rrd_ring[i].dma & AT_DMA_LO_ADDR_MASK)); | 
|  | AT_WRITE_REG(hw, REG_RRD_RING_SIZE, | 
|  | (rrd_ring[0].count & RRD_RING_SIZE_MASK)); | 
|  |  | 
|  | /* CMB */ | 
|  | AT_WRITE_REG(hw, REG_CMB_BASE_ADDR_LO, cmb->dma & AT_DMA_LO_ADDR_MASK); | 
|  |  | 
|  | /* SMB */ | 
|  | AT_WRITE_REG(hw, REG_SMB_BASE_ADDR_HI, | 
|  | (u32)((smb->dma & AT_DMA_HI_ADDR_MASK) >> 32)); | 
|  | AT_WRITE_REG(hw, REG_SMB_BASE_ADDR_LO, | 
|  | (u32)(smb->dma & AT_DMA_LO_ADDR_MASK)); | 
|  | if (hw->nic_type == athr_l2c_b) { | 
|  | AT_WRITE_REG(hw, REG_SRAM_RXF_LEN, 0x02a0L); | 
|  | AT_WRITE_REG(hw, REG_SRAM_TXF_LEN, 0x0100L); | 
|  | AT_WRITE_REG(hw, REG_SRAM_RXF_ADDR, 0x029f0000L); | 
|  | AT_WRITE_REG(hw, REG_SRAM_RFD0_INFO, 0x02bf02a0L); | 
|  | AT_WRITE_REG(hw, REG_SRAM_TXF_ADDR, 0x03bf02c0L); | 
|  | AT_WRITE_REG(hw, REG_SRAM_TRD_ADDR, 0x03df03c0L); | 
|  | AT_WRITE_REG(hw, REG_TXF_WATER_MARK, 0);	/* TX watermark, to enter l1 state.*/ | 
|  | AT_WRITE_REG(hw, REG_RXD_DMA_CTRL, 0);		/* RXD threshold.*/ | 
|  | } | 
|  | if (hw->nic_type == athr_l2c_b || hw->nic_type == athr_l1d_2) { | 
|  | /* Power Saving for L2c_B */ | 
|  | AT_READ_REG(hw, REG_SERDES_LOCK, &data); | 
|  | data |= SERDES_MAC_CLK_SLOWDOWN; | 
|  | data |= SERDES_PYH_CLK_SLOWDOWN; | 
|  | AT_WRITE_REG(hw, REG_SERDES_LOCK, data); | 
|  | } | 
|  | /* Load all of base address above */ | 
|  | AT_WRITE_REG(hw, REG_LOAD_PTR, 1); | 
|  | } | 
|  |  | 
|  | static void atl1c_configure_tx(struct atl1c_adapter *adapter) | 
|  | { | 
|  | struct atl1c_hw *hw = &adapter->hw; | 
|  | u32 dev_ctrl_data; | 
|  | u32 max_pay_load; | 
|  | u16 tx_offload_thresh; | 
|  | u32 txq_ctrl_data; | 
|  | u32 max_pay_load_data; | 
|  |  | 
|  | tx_offload_thresh = MAX_TX_OFFLOAD_THRESH; | 
|  | AT_WRITE_REG(hw, REG_TX_TSO_OFFLOAD_THRESH, | 
|  | (tx_offload_thresh >> 3) & TX_TSO_OFFLOAD_THRESH_MASK); | 
|  | AT_READ_REG(hw, REG_DEVICE_CTRL, &dev_ctrl_data); | 
|  | max_pay_load  = (dev_ctrl_data >> DEVICE_CTRL_MAX_PAYLOAD_SHIFT) & | 
|  | DEVICE_CTRL_MAX_PAYLOAD_MASK; | 
|  | hw->dmaw_block = min_t(u32, max_pay_load, hw->dmaw_block); | 
|  | max_pay_load  = (dev_ctrl_data >> DEVICE_CTRL_MAX_RREQ_SZ_SHIFT) & | 
|  | DEVICE_CTRL_MAX_RREQ_SZ_MASK; | 
|  | hw->dmar_block = min_t(u32, max_pay_load, hw->dmar_block); | 
|  |  | 
|  | txq_ctrl_data = (hw->tpd_burst & TXQ_NUM_TPD_BURST_MASK) << | 
|  | TXQ_NUM_TPD_BURST_SHIFT; | 
|  | if (hw->ctrl_flags & ATL1C_TXQ_MODE_ENHANCE) | 
|  | txq_ctrl_data |= TXQ_CTRL_ENH_MODE; | 
|  | max_pay_load_data = (atl1c_pay_load_size[hw->dmar_block] & | 
|  | TXQ_TXF_BURST_NUM_MASK) << TXQ_TXF_BURST_NUM_SHIFT; | 
|  | if (hw->nic_type == athr_l2c_b || hw->nic_type == athr_l2c_b2) | 
|  | max_pay_load_data >>= 1; | 
|  | txq_ctrl_data |= max_pay_load_data; | 
|  |  | 
|  | AT_WRITE_REG(hw, REG_TXQ_CTRL, txq_ctrl_data); | 
|  | } | 
|  |  | 
|  | static void atl1c_configure_rx(struct atl1c_adapter *adapter) | 
|  | { | 
|  | struct atl1c_hw *hw = &adapter->hw; | 
|  | u32 rxq_ctrl_data; | 
|  |  | 
|  | rxq_ctrl_data = (hw->rfd_burst & RXQ_RFD_BURST_NUM_MASK) << | 
|  | RXQ_RFD_BURST_NUM_SHIFT; | 
|  |  | 
|  | if (hw->ctrl_flags & ATL1C_RX_IPV6_CHKSUM) | 
|  | rxq_ctrl_data |= IPV6_CHKSUM_CTRL_EN; | 
|  | if (hw->rss_type == atl1c_rss_ipv4) | 
|  | rxq_ctrl_data |= RSS_HASH_IPV4; | 
|  | if (hw->rss_type == atl1c_rss_ipv4_tcp) | 
|  | rxq_ctrl_data |= RSS_HASH_IPV4_TCP; | 
|  | if (hw->rss_type == atl1c_rss_ipv6) | 
|  | rxq_ctrl_data |= RSS_HASH_IPV6; | 
|  | if (hw->rss_type == atl1c_rss_ipv6_tcp) | 
|  | rxq_ctrl_data |= RSS_HASH_IPV6_TCP; | 
|  | if (hw->rss_type != atl1c_rss_disable) | 
|  | rxq_ctrl_data |= RRS_HASH_CTRL_EN; | 
|  |  | 
|  | rxq_ctrl_data |= (hw->rss_mode & RSS_MODE_MASK) << | 
|  | RSS_MODE_SHIFT; | 
|  | rxq_ctrl_data |= (hw->rss_hash_bits & RSS_HASH_BITS_MASK) << | 
|  | RSS_HASH_BITS_SHIFT; | 
|  | if (hw->ctrl_flags & ATL1C_ASPM_CTRL_MON) | 
|  | rxq_ctrl_data |= (ASPM_THRUPUT_LIMIT_1M & | 
|  | ASPM_THRUPUT_LIMIT_MASK) << ASPM_THRUPUT_LIMIT_SHIFT; | 
|  |  | 
|  | AT_WRITE_REG(hw, REG_RXQ_CTRL, rxq_ctrl_data); | 
|  | } | 
|  |  | 
|  | static void atl1c_configure_rss(struct atl1c_adapter *adapter) | 
|  | { | 
|  | struct atl1c_hw *hw = &adapter->hw; | 
|  |  | 
|  | AT_WRITE_REG(hw, REG_IDT_TABLE, hw->indirect_tab); | 
|  | AT_WRITE_REG(hw, REG_BASE_CPU_NUMBER, hw->base_cpu); | 
|  | } | 
|  |  | 
|  | static void atl1c_configure_dma(struct atl1c_adapter *adapter) | 
|  | { | 
|  | struct atl1c_hw *hw = &adapter->hw; | 
|  | u32 dma_ctrl_data; | 
|  |  | 
|  | dma_ctrl_data = DMA_CTRL_DMAR_REQ_PRI; | 
|  | if (hw->ctrl_flags & ATL1C_CMB_ENABLE) | 
|  | dma_ctrl_data |= DMA_CTRL_CMB_EN; | 
|  | if (hw->ctrl_flags & ATL1C_SMB_ENABLE) | 
|  | dma_ctrl_data |= DMA_CTRL_SMB_EN; | 
|  | else | 
|  | dma_ctrl_data |= MAC_CTRL_SMB_DIS; | 
|  |  | 
|  | switch (hw->dma_order) { | 
|  | case atl1c_dma_ord_in: | 
|  | dma_ctrl_data |= DMA_CTRL_DMAR_IN_ORDER; | 
|  | break; | 
|  | case atl1c_dma_ord_enh: | 
|  | dma_ctrl_data |= DMA_CTRL_DMAR_ENH_ORDER; | 
|  | break; | 
|  | case atl1c_dma_ord_out: | 
|  | dma_ctrl_data |= DMA_CTRL_DMAR_OUT_ORDER; | 
|  | break; | 
|  | default: | 
|  | break; | 
|  | } | 
|  |  | 
|  | dma_ctrl_data |= (((u32)hw->dmar_block) & DMA_CTRL_DMAR_BURST_LEN_MASK) | 
|  | << DMA_CTRL_DMAR_BURST_LEN_SHIFT; | 
|  | dma_ctrl_data |= (((u32)hw->dmaw_block) & DMA_CTRL_DMAW_BURST_LEN_MASK) | 
|  | << DMA_CTRL_DMAW_BURST_LEN_SHIFT; | 
|  | dma_ctrl_data |= (((u32)hw->dmar_dly_cnt) & DMA_CTRL_DMAR_DLY_CNT_MASK) | 
|  | << DMA_CTRL_DMAR_DLY_CNT_SHIFT; | 
|  | dma_ctrl_data |= (((u32)hw->dmaw_dly_cnt) & DMA_CTRL_DMAW_DLY_CNT_MASK) | 
|  | << DMA_CTRL_DMAW_DLY_CNT_SHIFT; | 
|  |  | 
|  | AT_WRITE_REG(hw, REG_DMA_CTRL, dma_ctrl_data); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Stop the mac, transmit and receive units | 
|  | * hw - Struct containing variables accessed by shared code | 
|  | * return : 0  or  idle status (if error) | 
|  | */ | 
|  | static int atl1c_stop_mac(struct atl1c_hw *hw) | 
|  | { | 
|  | u32 data; | 
|  |  | 
|  | AT_READ_REG(hw, REG_RXQ_CTRL, &data); | 
|  | data &= ~(RXQ1_CTRL_EN | RXQ2_CTRL_EN | | 
|  | RXQ3_CTRL_EN | RXQ_CTRL_EN); | 
|  | AT_WRITE_REG(hw, REG_RXQ_CTRL, data); | 
|  |  | 
|  | AT_READ_REG(hw, REG_TXQ_CTRL, &data); | 
|  | data &= ~TXQ_CTRL_EN; | 
|  | AT_WRITE_REG(hw, REG_TWSI_CTRL, data); | 
|  |  | 
|  | atl1c_wait_until_idle(hw); | 
|  |  | 
|  | AT_READ_REG(hw, REG_MAC_CTRL, &data); | 
|  | data &= ~(MAC_CTRL_TX_EN | MAC_CTRL_RX_EN); | 
|  | AT_WRITE_REG(hw, REG_MAC_CTRL, data); | 
|  |  | 
|  | return (int)atl1c_wait_until_idle(hw); | 
|  | } | 
|  |  | 
|  | static void atl1c_enable_rx_ctrl(struct atl1c_hw *hw) | 
|  | { | 
|  | u32 data; | 
|  |  | 
|  | AT_READ_REG(hw, REG_RXQ_CTRL, &data); | 
|  | switch (hw->adapter->num_rx_queues) { | 
|  | case 4: | 
|  | data |= (RXQ3_CTRL_EN | RXQ2_CTRL_EN | RXQ1_CTRL_EN); | 
|  | break; | 
|  | case 3: | 
|  | data |= (RXQ2_CTRL_EN | RXQ1_CTRL_EN); | 
|  | break; | 
|  | case 2: | 
|  | data |= RXQ1_CTRL_EN; | 
|  | break; | 
|  | default: | 
|  | break; | 
|  | } | 
|  | data |= RXQ_CTRL_EN; | 
|  | AT_WRITE_REG(hw, REG_RXQ_CTRL, data); | 
|  | } | 
|  |  | 
|  | static void atl1c_enable_tx_ctrl(struct atl1c_hw *hw) | 
|  | { | 
|  | u32 data; | 
|  |  | 
|  | AT_READ_REG(hw, REG_TXQ_CTRL, &data); | 
|  | data |= TXQ_CTRL_EN; | 
|  | AT_WRITE_REG(hw, REG_TXQ_CTRL, data); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Reset the transmit and receive units; mask and clear all interrupts. | 
|  | * hw - Struct containing variables accessed by shared code | 
|  | * return : 0  or  idle status (if error) | 
|  | */ | 
|  | static int atl1c_reset_mac(struct atl1c_hw *hw) | 
|  | { | 
|  | struct atl1c_adapter *adapter = (struct atl1c_adapter *)hw->adapter; | 
|  | struct pci_dev *pdev = adapter->pdev; | 
|  | u32 master_ctrl_data = 0; | 
|  |  | 
|  | AT_WRITE_REG(hw, REG_IMR, 0); | 
|  | AT_WRITE_REG(hw, REG_ISR, ISR_DIS_INT); | 
|  |  | 
|  | atl1c_stop_mac(hw); | 
|  | /* | 
|  | * Issue Soft Reset to the MAC.  This will reset the chip's | 
|  | * transmit, receive, DMA.  It will not effect | 
|  | * the current PCI configuration.  The global reset bit is self- | 
|  | * clearing, and should clear within a microsecond. | 
|  | */ | 
|  | AT_READ_REG(hw, REG_MASTER_CTRL, &master_ctrl_data); | 
|  | master_ctrl_data |= MASTER_CTRL_OOB_DIS_OFF; | 
|  | AT_WRITE_REGW(hw, REG_MASTER_CTRL, ((master_ctrl_data | MASTER_CTRL_SOFT_RST) | 
|  | & 0xFFFF)); | 
|  |  | 
|  | AT_WRITE_FLUSH(hw); | 
|  | msleep(10); | 
|  | /* Wait at least 10ms for All module to be Idle */ | 
|  |  | 
|  | if (atl1c_wait_until_idle(hw)) { | 
|  | dev_err(&pdev->dev, | 
|  | "MAC state machine can't be idle since" | 
|  | " disabled for 10ms second\n"); | 
|  | return -1; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void atl1c_disable_l0s_l1(struct atl1c_hw *hw) | 
|  | { | 
|  | u32 pm_ctrl_data; | 
|  |  | 
|  | AT_READ_REG(hw, REG_PM_CTRL, &pm_ctrl_data); | 
|  | pm_ctrl_data &= ~(PM_CTRL_L1_ENTRY_TIMER_MASK << | 
|  | PM_CTRL_L1_ENTRY_TIMER_SHIFT); | 
|  | pm_ctrl_data &= ~PM_CTRL_CLK_SWH_L1; | 
|  | pm_ctrl_data &= ~PM_CTRL_ASPM_L0S_EN; | 
|  | pm_ctrl_data &= ~PM_CTRL_ASPM_L1_EN; | 
|  | pm_ctrl_data &= ~PM_CTRL_MAC_ASPM_CHK; | 
|  | pm_ctrl_data &= ~PM_CTRL_SERDES_PD_EX_L1; | 
|  |  | 
|  | pm_ctrl_data |= PM_CTRL_SERDES_BUDS_RX_L1_EN; | 
|  | pm_ctrl_data |= PM_CTRL_SERDES_PLL_L1_EN; | 
|  | pm_ctrl_data |=	PM_CTRL_SERDES_L1_EN; | 
|  | AT_WRITE_REG(hw, REG_PM_CTRL, pm_ctrl_data); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Set ASPM state. | 
|  | * Enable/disable L0s/L1 depend on link state. | 
|  | */ | 
|  | static void atl1c_set_aspm(struct atl1c_hw *hw, bool linkup) | 
|  | { | 
|  | u32 pm_ctrl_data; | 
|  | u32 link_ctrl_data; | 
|  | u32 link_l1_timer = 0xF; | 
|  |  | 
|  | AT_READ_REG(hw, REG_PM_CTRL, &pm_ctrl_data); | 
|  | AT_READ_REG(hw, REG_LINK_CTRL, &link_ctrl_data); | 
|  |  | 
|  | pm_ctrl_data &= ~PM_CTRL_SERDES_PD_EX_L1; | 
|  | pm_ctrl_data &=  ~(PM_CTRL_L1_ENTRY_TIMER_MASK << | 
|  | PM_CTRL_L1_ENTRY_TIMER_SHIFT); | 
|  | pm_ctrl_data &= ~(PM_CTRL_LCKDET_TIMER_MASK << | 
|  | PM_CTRL_LCKDET_TIMER_SHIFT); | 
|  | pm_ctrl_data |= AT_LCKDET_TIMER	<< PM_CTRL_LCKDET_TIMER_SHIFT; | 
|  |  | 
|  | if (hw->nic_type == athr_l2c_b || hw->nic_type == athr_l1d || | 
|  | hw->nic_type == athr_l2c_b2 || hw->nic_type == athr_l1d_2) { | 
|  | link_ctrl_data &= ~LINK_CTRL_EXT_SYNC; | 
|  | if (!(hw->ctrl_flags & ATL1C_APS_MODE_ENABLE)) { | 
|  | if (hw->nic_type == athr_l2c_b && hw->revision_id == L2CB_V10) | 
|  | link_ctrl_data |= LINK_CTRL_EXT_SYNC; | 
|  | } | 
|  |  | 
|  | AT_WRITE_REG(hw, REG_LINK_CTRL, link_ctrl_data); | 
|  |  | 
|  | pm_ctrl_data |= PM_CTRL_RCVR_WT_TIMER; | 
|  | pm_ctrl_data &= ~(PM_CTRL_PM_REQ_TIMER_MASK << | 
|  | PM_CTRL_PM_REQ_TIMER_SHIFT); | 
|  | pm_ctrl_data |= AT_ASPM_L1_TIMER << | 
|  | PM_CTRL_PM_REQ_TIMER_SHIFT; | 
|  | pm_ctrl_data &= ~PM_CTRL_SA_DLY_EN; | 
|  | pm_ctrl_data &= ~PM_CTRL_HOTRST; | 
|  | pm_ctrl_data |= 1 << PM_CTRL_L1_ENTRY_TIMER_SHIFT; | 
|  | pm_ctrl_data |= PM_CTRL_SERDES_PD_EX_L1; | 
|  | } | 
|  | pm_ctrl_data |= PM_CTRL_MAC_ASPM_CHK; | 
|  | if (linkup) { | 
|  | pm_ctrl_data &= ~PM_CTRL_ASPM_L1_EN; | 
|  | pm_ctrl_data &= ~PM_CTRL_ASPM_L0S_EN; | 
|  | if (hw->ctrl_flags & ATL1C_ASPM_L1_SUPPORT) | 
|  | pm_ctrl_data |= PM_CTRL_ASPM_L1_EN; | 
|  | if (hw->ctrl_flags & ATL1C_ASPM_L0S_SUPPORT) | 
|  | pm_ctrl_data |= PM_CTRL_ASPM_L0S_EN; | 
|  |  | 
|  | if (hw->nic_type == athr_l2c_b || hw->nic_type == athr_l1d || | 
|  | hw->nic_type == athr_l2c_b2 || hw->nic_type == athr_l1d_2) { | 
|  | if (hw->nic_type == athr_l2c_b) | 
|  | if (!(hw->ctrl_flags & ATL1C_APS_MODE_ENABLE)) | 
|  | pm_ctrl_data &= ~PM_CTRL_ASPM_L0S_EN; | 
|  | pm_ctrl_data &= ~PM_CTRL_SERDES_L1_EN; | 
|  | pm_ctrl_data &= ~PM_CTRL_SERDES_PLL_L1_EN; | 
|  | pm_ctrl_data &= ~PM_CTRL_SERDES_BUDS_RX_L1_EN; | 
|  | pm_ctrl_data |= PM_CTRL_CLK_SWH_L1; | 
|  | if (hw->adapter->link_speed == SPEED_100 || | 
|  | hw->adapter->link_speed == SPEED_1000) { | 
|  | pm_ctrl_data &=  ~(PM_CTRL_L1_ENTRY_TIMER_MASK << | 
|  | PM_CTRL_L1_ENTRY_TIMER_SHIFT); | 
|  | if (hw->nic_type == athr_l2c_b) | 
|  | link_l1_timer = 7; | 
|  | else if (hw->nic_type == athr_l2c_b2 || | 
|  | hw->nic_type == athr_l1d_2) | 
|  | link_l1_timer = 4; | 
|  | pm_ctrl_data |= link_l1_timer << | 
|  | PM_CTRL_L1_ENTRY_TIMER_SHIFT; | 
|  | } | 
|  | } else { | 
|  | pm_ctrl_data |= PM_CTRL_SERDES_L1_EN; | 
|  | pm_ctrl_data |= PM_CTRL_SERDES_PLL_L1_EN; | 
|  | pm_ctrl_data |= PM_CTRL_SERDES_BUDS_RX_L1_EN; | 
|  | pm_ctrl_data &= ~PM_CTRL_CLK_SWH_L1; | 
|  | pm_ctrl_data &= ~PM_CTRL_ASPM_L0S_EN; | 
|  | pm_ctrl_data &= ~PM_CTRL_ASPM_L1_EN; | 
|  |  | 
|  | } | 
|  | } else { | 
|  | pm_ctrl_data &= ~PM_CTRL_SERDES_L1_EN; | 
|  | pm_ctrl_data &= ~PM_CTRL_ASPM_L0S_EN; | 
|  | pm_ctrl_data &= ~PM_CTRL_SERDES_PLL_L1_EN; | 
|  | pm_ctrl_data |= PM_CTRL_CLK_SWH_L1; | 
|  |  | 
|  | if (hw->ctrl_flags & ATL1C_ASPM_L1_SUPPORT) | 
|  | pm_ctrl_data |= PM_CTRL_ASPM_L1_EN; | 
|  | else | 
|  | pm_ctrl_data &= ~PM_CTRL_ASPM_L1_EN; | 
|  | } | 
|  | AT_WRITE_REG(hw, REG_PM_CTRL, pm_ctrl_data); | 
|  |  | 
|  | return; | 
|  | } | 
|  |  | 
|  | static void atl1c_setup_mac_ctrl(struct atl1c_adapter *adapter) | 
|  | { | 
|  | struct atl1c_hw *hw = &adapter->hw; | 
|  | struct net_device *netdev = adapter->netdev; | 
|  | u32 mac_ctrl_data; | 
|  |  | 
|  | mac_ctrl_data = MAC_CTRL_TX_EN | MAC_CTRL_RX_EN; | 
|  | mac_ctrl_data |= (MAC_CTRL_TX_FLOW | MAC_CTRL_RX_FLOW); | 
|  |  | 
|  | if (adapter->link_duplex == FULL_DUPLEX) { | 
|  | hw->mac_duplex = true; | 
|  | mac_ctrl_data |= MAC_CTRL_DUPLX; | 
|  | } | 
|  |  | 
|  | if (adapter->link_speed == SPEED_1000) | 
|  | hw->mac_speed = atl1c_mac_speed_1000; | 
|  | else | 
|  | hw->mac_speed = atl1c_mac_speed_10_100; | 
|  |  | 
|  | mac_ctrl_data |= (hw->mac_speed & MAC_CTRL_SPEED_MASK) << | 
|  | MAC_CTRL_SPEED_SHIFT; | 
|  |  | 
|  | mac_ctrl_data |= (MAC_CTRL_ADD_CRC | MAC_CTRL_PAD); | 
|  | mac_ctrl_data |= ((hw->preamble_len & MAC_CTRL_PRMLEN_MASK) << | 
|  | MAC_CTRL_PRMLEN_SHIFT); | 
|  |  | 
|  | __atl1c_vlan_mode(netdev->features, &mac_ctrl_data); | 
|  |  | 
|  | mac_ctrl_data |= MAC_CTRL_BC_EN; | 
|  | if (netdev->flags & IFF_PROMISC) | 
|  | mac_ctrl_data |= MAC_CTRL_PROMIS_EN; | 
|  | if (netdev->flags & IFF_ALLMULTI) | 
|  | mac_ctrl_data |= MAC_CTRL_MC_ALL_EN; | 
|  |  | 
|  | mac_ctrl_data |= MAC_CTRL_SINGLE_PAUSE_EN; | 
|  | if (hw->nic_type == athr_l1d || hw->nic_type == athr_l2c_b2 || | 
|  | hw->nic_type == athr_l1d_2) { | 
|  | mac_ctrl_data |= MAC_CTRL_SPEED_MODE_SW; | 
|  | mac_ctrl_data |= MAC_CTRL_HASH_ALG_CRC32; | 
|  | } | 
|  | AT_WRITE_REG(hw, REG_MAC_CTRL, mac_ctrl_data); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * atl1c_configure - Configure Transmit&Receive Unit after Reset | 
|  | * @adapter: board private structure | 
|  | * | 
|  | * Configure the Tx /Rx unit of the MAC after a reset. | 
|  | */ | 
|  | static int atl1c_configure(struct atl1c_adapter *adapter) | 
|  | { | 
|  | struct atl1c_hw *hw = &adapter->hw; | 
|  | u32 master_ctrl_data = 0; | 
|  | u32 intr_modrt_data; | 
|  | u32 data; | 
|  |  | 
|  | /* clear interrupt status */ | 
|  | AT_WRITE_REG(hw, REG_ISR, 0xFFFFFFFF); | 
|  | /*  Clear any WOL status */ | 
|  | AT_WRITE_REG(hw, REG_WOL_CTRL, 0); | 
|  | /* set Interrupt Clear Timer | 
|  | * HW will enable self to assert interrupt event to system after | 
|  | * waiting x-time for software to notify it accept interrupt. | 
|  | */ | 
|  |  | 
|  | data = CLK_GATING_EN_ALL; | 
|  | if (hw->ctrl_flags & ATL1C_CLK_GATING_EN) { | 
|  | if (hw->nic_type == athr_l2c_b) | 
|  | data &= ~CLK_GATING_RXMAC_EN; | 
|  | } else | 
|  | data = 0; | 
|  | AT_WRITE_REG(hw, REG_CLK_GATING_CTRL, data); | 
|  |  | 
|  | AT_WRITE_REG(hw, REG_INT_RETRIG_TIMER, | 
|  | hw->ict & INT_RETRIG_TIMER_MASK); | 
|  |  | 
|  | atl1c_configure_des_ring(adapter); | 
|  |  | 
|  | if (hw->ctrl_flags & ATL1C_INTR_MODRT_ENABLE) { | 
|  | intr_modrt_data = (hw->tx_imt & IRQ_MODRT_TIMER_MASK) << | 
|  | IRQ_MODRT_TX_TIMER_SHIFT; | 
|  | intr_modrt_data |= (hw->rx_imt & IRQ_MODRT_TIMER_MASK) << | 
|  | IRQ_MODRT_RX_TIMER_SHIFT; | 
|  | AT_WRITE_REG(hw, REG_IRQ_MODRT_TIMER_INIT, intr_modrt_data); | 
|  | master_ctrl_data |= | 
|  | MASTER_CTRL_TX_ITIMER_EN | MASTER_CTRL_RX_ITIMER_EN; | 
|  | } | 
|  |  | 
|  | if (hw->ctrl_flags & ATL1C_INTR_CLEAR_ON_READ) | 
|  | master_ctrl_data |= MASTER_CTRL_INT_RDCLR; | 
|  |  | 
|  | master_ctrl_data |= MASTER_CTRL_SA_TIMER_EN; | 
|  | AT_WRITE_REG(hw, REG_MASTER_CTRL, master_ctrl_data); | 
|  |  | 
|  | if (hw->ctrl_flags & ATL1C_CMB_ENABLE) { | 
|  | AT_WRITE_REG(hw, REG_CMB_TPD_THRESH, | 
|  | hw->cmb_tpd & CMB_TPD_THRESH_MASK); | 
|  | AT_WRITE_REG(hw, REG_CMB_TX_TIMER, | 
|  | hw->cmb_tx_timer & CMB_TX_TIMER_MASK); | 
|  | } | 
|  |  | 
|  | if (hw->ctrl_flags & ATL1C_SMB_ENABLE) | 
|  | AT_WRITE_REG(hw, REG_SMB_STAT_TIMER, | 
|  | hw->smb_timer & SMB_STAT_TIMER_MASK); | 
|  | /* set MTU */ | 
|  | AT_WRITE_REG(hw, REG_MTU, hw->max_frame_size + ETH_HLEN + | 
|  | VLAN_HLEN + ETH_FCS_LEN); | 
|  | /* HDS, disable */ | 
|  | AT_WRITE_REG(hw, REG_HDS_CTRL, 0); | 
|  |  | 
|  | atl1c_configure_tx(adapter); | 
|  | atl1c_configure_rx(adapter); | 
|  | atl1c_configure_rss(adapter); | 
|  | atl1c_configure_dma(adapter); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void atl1c_update_hw_stats(struct atl1c_adapter *adapter) | 
|  | { | 
|  | u16 hw_reg_addr = 0; | 
|  | unsigned long *stats_item = NULL; | 
|  | u32 data; | 
|  |  | 
|  | /* update rx status */ | 
|  | hw_reg_addr = REG_MAC_RX_STATUS_BIN; | 
|  | stats_item  = &adapter->hw_stats.rx_ok; | 
|  | while (hw_reg_addr <= REG_MAC_RX_STATUS_END) { | 
|  | AT_READ_REG(&adapter->hw, hw_reg_addr, &data); | 
|  | *stats_item += data; | 
|  | stats_item++; | 
|  | hw_reg_addr += 4; | 
|  | } | 
|  | /* update tx status */ | 
|  | hw_reg_addr = REG_MAC_TX_STATUS_BIN; | 
|  | stats_item  = &adapter->hw_stats.tx_ok; | 
|  | while (hw_reg_addr <= REG_MAC_TX_STATUS_END) { | 
|  | AT_READ_REG(&adapter->hw, hw_reg_addr, &data); | 
|  | *stats_item += data; | 
|  | stats_item++; | 
|  | hw_reg_addr += 4; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * atl1c_get_stats - Get System Network Statistics | 
|  | * @netdev: network interface device structure | 
|  | * | 
|  | * Returns the address of the device statistics structure. | 
|  | * The statistics are actually updated from the timer callback. | 
|  | */ | 
|  | static struct net_device_stats *atl1c_get_stats(struct net_device *netdev) | 
|  | { | 
|  | struct atl1c_adapter *adapter = netdev_priv(netdev); | 
|  | struct atl1c_hw_stats  *hw_stats = &adapter->hw_stats; | 
|  | struct net_device_stats *net_stats = &netdev->stats; | 
|  |  | 
|  | atl1c_update_hw_stats(adapter); | 
|  | net_stats->rx_packets = hw_stats->rx_ok; | 
|  | net_stats->tx_packets = hw_stats->tx_ok; | 
|  | net_stats->rx_bytes   = hw_stats->rx_byte_cnt; | 
|  | net_stats->tx_bytes   = hw_stats->tx_byte_cnt; | 
|  | net_stats->multicast  = hw_stats->rx_mcast; | 
|  | net_stats->collisions = hw_stats->tx_1_col + | 
|  | hw_stats->tx_2_col * 2 + | 
|  | hw_stats->tx_late_col + hw_stats->tx_abort_col; | 
|  | net_stats->rx_errors  = hw_stats->rx_frag + hw_stats->rx_fcs_err + | 
|  | hw_stats->rx_len_err + hw_stats->rx_sz_ov + | 
|  | hw_stats->rx_rrd_ov + hw_stats->rx_align_err; | 
|  | net_stats->rx_fifo_errors   = hw_stats->rx_rxf_ov; | 
|  | net_stats->rx_length_errors = hw_stats->rx_len_err; | 
|  | net_stats->rx_crc_errors    = hw_stats->rx_fcs_err; | 
|  | net_stats->rx_frame_errors  = hw_stats->rx_align_err; | 
|  | net_stats->rx_over_errors   = hw_stats->rx_rrd_ov + hw_stats->rx_rxf_ov; | 
|  |  | 
|  | net_stats->rx_missed_errors = hw_stats->rx_rrd_ov + hw_stats->rx_rxf_ov; | 
|  |  | 
|  | net_stats->tx_errors = hw_stats->tx_late_col + hw_stats->tx_abort_col + | 
|  | hw_stats->tx_underrun + hw_stats->tx_trunc; | 
|  | net_stats->tx_fifo_errors    = hw_stats->tx_underrun; | 
|  | net_stats->tx_aborted_errors = hw_stats->tx_abort_col; | 
|  | net_stats->tx_window_errors  = hw_stats->tx_late_col; | 
|  |  | 
|  | return net_stats; | 
|  | } | 
|  |  | 
|  | static inline void atl1c_clear_phy_int(struct atl1c_adapter *adapter) | 
|  | { | 
|  | u16 phy_data; | 
|  |  | 
|  | spin_lock(&adapter->mdio_lock); | 
|  | atl1c_read_phy_reg(&adapter->hw, MII_ISR, &phy_data); | 
|  | spin_unlock(&adapter->mdio_lock); | 
|  | } | 
|  |  | 
|  | static bool atl1c_clean_tx_irq(struct atl1c_adapter *adapter, | 
|  | enum atl1c_trans_queue type) | 
|  | { | 
|  | struct atl1c_tpd_ring *tpd_ring = (struct atl1c_tpd_ring *) | 
|  | &adapter->tpd_ring[type]; | 
|  | struct atl1c_buffer *buffer_info; | 
|  | struct pci_dev *pdev = adapter->pdev; | 
|  | u16 next_to_clean = atomic_read(&tpd_ring->next_to_clean); | 
|  | u16 hw_next_to_clean; | 
|  | u16 shift; | 
|  | u32 data; | 
|  |  | 
|  | if (type == atl1c_trans_high) | 
|  | shift = MB_HTPD_CONS_IDX_SHIFT; | 
|  | else | 
|  | shift = MB_NTPD_CONS_IDX_SHIFT; | 
|  |  | 
|  | AT_READ_REG(&adapter->hw, REG_MB_PRIO_CONS_IDX, &data); | 
|  | hw_next_to_clean = (data >> shift) & MB_PRIO_PROD_IDX_MASK; | 
|  |  | 
|  | while (next_to_clean != hw_next_to_clean) { | 
|  | buffer_info = &tpd_ring->buffer_info[next_to_clean]; | 
|  | atl1c_clean_buffer(pdev, buffer_info, 1); | 
|  | if (++next_to_clean == tpd_ring->count) | 
|  | next_to_clean = 0; | 
|  | atomic_set(&tpd_ring->next_to_clean, next_to_clean); | 
|  | } | 
|  |  | 
|  | if (netif_queue_stopped(adapter->netdev) && | 
|  | netif_carrier_ok(adapter->netdev)) { | 
|  | netif_wake_queue(adapter->netdev); | 
|  | } | 
|  |  | 
|  | return true; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * atl1c_intr - Interrupt Handler | 
|  | * @irq: interrupt number | 
|  | * @data: pointer to a network interface device structure | 
|  | * @pt_regs: CPU registers structure | 
|  | */ | 
|  | static irqreturn_t atl1c_intr(int irq, void *data) | 
|  | { | 
|  | struct net_device *netdev  = data; | 
|  | struct atl1c_adapter *adapter = netdev_priv(netdev); | 
|  | struct pci_dev *pdev = adapter->pdev; | 
|  | struct atl1c_hw *hw = &adapter->hw; | 
|  | int max_ints = AT_MAX_INT_WORK; | 
|  | int handled = IRQ_NONE; | 
|  | u32 status; | 
|  | u32 reg_data; | 
|  |  | 
|  | do { | 
|  | AT_READ_REG(hw, REG_ISR, ®_data); | 
|  | status = reg_data & hw->intr_mask; | 
|  |  | 
|  | if (status == 0 || (status & ISR_DIS_INT) != 0) { | 
|  | if (max_ints != AT_MAX_INT_WORK) | 
|  | handled = IRQ_HANDLED; | 
|  | break; | 
|  | } | 
|  | /* link event */ | 
|  | if (status & ISR_GPHY) | 
|  | atl1c_clear_phy_int(adapter); | 
|  | /* Ack ISR */ | 
|  | AT_WRITE_REG(hw, REG_ISR, status | ISR_DIS_INT); | 
|  | if (status & ISR_RX_PKT) { | 
|  | if (likely(napi_schedule_prep(&adapter->napi))) { | 
|  | hw->intr_mask &= ~ISR_RX_PKT; | 
|  | AT_WRITE_REG(hw, REG_IMR, hw->intr_mask); | 
|  | __napi_schedule(&adapter->napi); | 
|  | } | 
|  | } | 
|  | if (status & ISR_TX_PKT) | 
|  | atl1c_clean_tx_irq(adapter, atl1c_trans_normal); | 
|  |  | 
|  | handled = IRQ_HANDLED; | 
|  | /* check if PCIE PHY Link down */ | 
|  | if (status & ISR_ERROR) { | 
|  | if (netif_msg_hw(adapter)) | 
|  | dev_err(&pdev->dev, | 
|  | "atl1c hardware error (status = 0x%x)\n", | 
|  | status & ISR_ERROR); | 
|  | /* reset MAC */ | 
|  | adapter->work_event |= ATL1C_WORK_EVENT_RESET; | 
|  | schedule_work(&adapter->common_task); | 
|  | return IRQ_HANDLED; | 
|  | } | 
|  |  | 
|  | if (status & ISR_OVER) | 
|  | if (netif_msg_intr(adapter)) | 
|  | dev_warn(&pdev->dev, | 
|  | "TX/RX overflow (status = 0x%x)\n", | 
|  | status & ISR_OVER); | 
|  |  | 
|  | /* link event */ | 
|  | if (status & (ISR_GPHY | ISR_MANUAL)) { | 
|  | netdev->stats.tx_carrier_errors++; | 
|  | atl1c_link_chg_event(adapter); | 
|  | break; | 
|  | } | 
|  |  | 
|  | } while (--max_ints > 0); | 
|  | /* re-enable Interrupt*/ | 
|  | AT_WRITE_REG(&adapter->hw, REG_ISR, 0); | 
|  | return handled; | 
|  | } | 
|  |  | 
|  | static inline void atl1c_rx_checksum(struct atl1c_adapter *adapter, | 
|  | struct sk_buff *skb, struct atl1c_recv_ret_status *prrs) | 
|  | { | 
|  | /* | 
|  | * The pid field in RRS in not correct sometimes, so we | 
|  | * cannot figure out if the packet is fragmented or not, | 
|  | * so we tell the KERNEL CHECKSUM_NONE | 
|  | */ | 
|  | skb_checksum_none_assert(skb); | 
|  | } | 
|  |  | 
|  | static int atl1c_alloc_rx_buffer(struct atl1c_adapter *adapter, const int ringid) | 
|  | { | 
|  | struct atl1c_rfd_ring *rfd_ring = &adapter->rfd_ring[ringid]; | 
|  | struct pci_dev *pdev = adapter->pdev; | 
|  | struct atl1c_buffer *buffer_info, *next_info; | 
|  | struct sk_buff *skb; | 
|  | void *vir_addr = NULL; | 
|  | u16 num_alloc = 0; | 
|  | u16 rfd_next_to_use, next_next; | 
|  | struct atl1c_rx_free_desc *rfd_desc; | 
|  |  | 
|  | next_next = rfd_next_to_use = rfd_ring->next_to_use; | 
|  | if (++next_next == rfd_ring->count) | 
|  | next_next = 0; | 
|  | buffer_info = &rfd_ring->buffer_info[rfd_next_to_use]; | 
|  | next_info = &rfd_ring->buffer_info[next_next]; | 
|  |  | 
|  | while (next_info->flags & ATL1C_BUFFER_FREE) { | 
|  | rfd_desc = ATL1C_RFD_DESC(rfd_ring, rfd_next_to_use); | 
|  |  | 
|  | skb = dev_alloc_skb(adapter->rx_buffer_len); | 
|  | if (unlikely(!skb)) { | 
|  | if (netif_msg_rx_err(adapter)) | 
|  | dev_warn(&pdev->dev, "alloc rx buffer failed\n"); | 
|  | break; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Make buffer alignment 2 beyond a 16 byte boundary | 
|  | * this will result in a 16 byte aligned IP header after | 
|  | * the 14 byte MAC header is removed | 
|  | */ | 
|  | vir_addr = skb->data; | 
|  | ATL1C_SET_BUFFER_STATE(buffer_info, ATL1C_BUFFER_BUSY); | 
|  | buffer_info->skb = skb; | 
|  | buffer_info->length = adapter->rx_buffer_len; | 
|  | buffer_info->dma = pci_map_single(pdev, vir_addr, | 
|  | buffer_info->length, | 
|  | PCI_DMA_FROMDEVICE); | 
|  | ATL1C_SET_PCIMAP_TYPE(buffer_info, ATL1C_PCIMAP_SINGLE, | 
|  | ATL1C_PCIMAP_FROMDEVICE); | 
|  | rfd_desc->buffer_addr = cpu_to_le64(buffer_info->dma); | 
|  | rfd_next_to_use = next_next; | 
|  | if (++next_next == rfd_ring->count) | 
|  | next_next = 0; | 
|  | buffer_info = &rfd_ring->buffer_info[rfd_next_to_use]; | 
|  | next_info = &rfd_ring->buffer_info[next_next]; | 
|  | num_alloc++; | 
|  | } | 
|  |  | 
|  | if (num_alloc) { | 
|  | /* TODO: update mailbox here */ | 
|  | wmb(); | 
|  | rfd_ring->next_to_use = rfd_next_to_use; | 
|  | AT_WRITE_REG(&adapter->hw, atl1c_rfd_prod_idx_regs[ringid], | 
|  | rfd_ring->next_to_use & MB_RFDX_PROD_IDX_MASK); | 
|  | } | 
|  |  | 
|  | return num_alloc; | 
|  | } | 
|  |  | 
|  | static void atl1c_clean_rrd(struct atl1c_rrd_ring *rrd_ring, | 
|  | struct	atl1c_recv_ret_status *rrs, u16 num) | 
|  | { | 
|  | u16 i; | 
|  | /* the relationship between rrd and rfd is one map one */ | 
|  | for (i = 0; i < num; i++, rrs = ATL1C_RRD_DESC(rrd_ring, | 
|  | rrd_ring->next_to_clean)) { | 
|  | rrs->word3 &= ~RRS_RXD_UPDATED; | 
|  | if (++rrd_ring->next_to_clean == rrd_ring->count) | 
|  | rrd_ring->next_to_clean = 0; | 
|  | } | 
|  | } | 
|  |  | 
|  | static void atl1c_clean_rfd(struct atl1c_rfd_ring *rfd_ring, | 
|  | struct atl1c_recv_ret_status *rrs, u16 num) | 
|  | { | 
|  | u16 i; | 
|  | u16 rfd_index; | 
|  | struct atl1c_buffer *buffer_info = rfd_ring->buffer_info; | 
|  |  | 
|  | rfd_index = (rrs->word0 >> RRS_RX_RFD_INDEX_SHIFT) & | 
|  | RRS_RX_RFD_INDEX_MASK; | 
|  | for (i = 0; i < num; i++) { | 
|  | buffer_info[rfd_index].skb = NULL; | 
|  | ATL1C_SET_BUFFER_STATE(&buffer_info[rfd_index], | 
|  | ATL1C_BUFFER_FREE); | 
|  | if (++rfd_index == rfd_ring->count) | 
|  | rfd_index = 0; | 
|  | } | 
|  | rfd_ring->next_to_clean = rfd_index; | 
|  | } | 
|  |  | 
|  | static void atl1c_clean_rx_irq(struct atl1c_adapter *adapter, u8 que, | 
|  | int *work_done, int work_to_do) | 
|  | { | 
|  | u16 rfd_num, rfd_index; | 
|  | u16 count = 0; | 
|  | u16 length; | 
|  | struct pci_dev *pdev = adapter->pdev; | 
|  | struct net_device *netdev  = adapter->netdev; | 
|  | struct atl1c_rfd_ring *rfd_ring = &adapter->rfd_ring[que]; | 
|  | struct atl1c_rrd_ring *rrd_ring = &adapter->rrd_ring[que]; | 
|  | struct sk_buff *skb; | 
|  | struct atl1c_recv_ret_status *rrs; | 
|  | struct atl1c_buffer *buffer_info; | 
|  |  | 
|  | while (1) { | 
|  | if (*work_done >= work_to_do) | 
|  | break; | 
|  | rrs = ATL1C_RRD_DESC(rrd_ring, rrd_ring->next_to_clean); | 
|  | if (likely(RRS_RXD_IS_VALID(rrs->word3))) { | 
|  | rfd_num = (rrs->word0 >> RRS_RX_RFD_CNT_SHIFT) & | 
|  | RRS_RX_RFD_CNT_MASK; | 
|  | if (unlikely(rfd_num != 1)) | 
|  | /* TODO support mul rfd*/ | 
|  | if (netif_msg_rx_err(adapter)) | 
|  | dev_warn(&pdev->dev, | 
|  | "Multi rfd not support yet!\n"); | 
|  | goto rrs_checked; | 
|  | } else { | 
|  | break; | 
|  | } | 
|  | rrs_checked: | 
|  | atl1c_clean_rrd(rrd_ring, rrs, rfd_num); | 
|  | if (rrs->word3 & (RRS_RX_ERR_SUM | RRS_802_3_LEN_ERR)) { | 
|  | atl1c_clean_rfd(rfd_ring, rrs, rfd_num); | 
|  | if (netif_msg_rx_err(adapter)) | 
|  | dev_warn(&pdev->dev, | 
|  | "wrong packet! rrs word3 is %x\n", | 
|  | rrs->word3); | 
|  | continue; | 
|  | } | 
|  |  | 
|  | length = le16_to_cpu((rrs->word3 >> RRS_PKT_SIZE_SHIFT) & | 
|  | RRS_PKT_SIZE_MASK); | 
|  | /* Good Receive */ | 
|  | if (likely(rfd_num == 1)) { | 
|  | rfd_index = (rrs->word0 >> RRS_RX_RFD_INDEX_SHIFT) & | 
|  | RRS_RX_RFD_INDEX_MASK; | 
|  | buffer_info = &rfd_ring->buffer_info[rfd_index]; | 
|  | pci_unmap_single(pdev, buffer_info->dma, | 
|  | buffer_info->length, PCI_DMA_FROMDEVICE); | 
|  | skb = buffer_info->skb; | 
|  | } else { | 
|  | /* TODO */ | 
|  | if (netif_msg_rx_err(adapter)) | 
|  | dev_warn(&pdev->dev, | 
|  | "Multi rfd not support yet!\n"); | 
|  | break; | 
|  | } | 
|  | atl1c_clean_rfd(rfd_ring, rrs, rfd_num); | 
|  | skb_put(skb, length - ETH_FCS_LEN); | 
|  | skb->protocol = eth_type_trans(skb, netdev); | 
|  | atl1c_rx_checksum(adapter, skb, rrs); | 
|  | if (rrs->word3 & RRS_VLAN_INS) { | 
|  | u16 vlan; | 
|  |  | 
|  | AT_TAG_TO_VLAN(rrs->vlan_tag, vlan); | 
|  | vlan = le16_to_cpu(vlan); | 
|  | __vlan_hwaccel_put_tag(skb, vlan); | 
|  | } | 
|  | netif_receive_skb(skb); | 
|  |  | 
|  | (*work_done)++; | 
|  | count++; | 
|  | } | 
|  | if (count) | 
|  | atl1c_alloc_rx_buffer(adapter, que); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * atl1c_clean - NAPI Rx polling callback | 
|  | * @adapter: board private structure | 
|  | */ | 
|  | static int atl1c_clean(struct napi_struct *napi, int budget) | 
|  | { | 
|  | struct atl1c_adapter *adapter = | 
|  | container_of(napi, struct atl1c_adapter, napi); | 
|  | int work_done = 0; | 
|  |  | 
|  | /* Keep link state information with original netdev */ | 
|  | if (!netif_carrier_ok(adapter->netdev)) | 
|  | goto quit_polling; | 
|  | /* just enable one RXQ */ | 
|  | atl1c_clean_rx_irq(adapter, 0, &work_done, budget); | 
|  |  | 
|  | if (work_done < budget) { | 
|  | quit_polling: | 
|  | napi_complete(napi); | 
|  | adapter->hw.intr_mask |= ISR_RX_PKT; | 
|  | AT_WRITE_REG(&adapter->hw, REG_IMR, adapter->hw.intr_mask); | 
|  | } | 
|  | return work_done; | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_NET_POLL_CONTROLLER | 
|  |  | 
|  | /* | 
|  | * Polling 'interrupt' - used by things like netconsole to send skbs | 
|  | * without having to re-enable interrupts. It's not called while | 
|  | * the interrupt routine is executing. | 
|  | */ | 
|  | static void atl1c_netpoll(struct net_device *netdev) | 
|  | { | 
|  | struct atl1c_adapter *adapter = netdev_priv(netdev); | 
|  |  | 
|  | disable_irq(adapter->pdev->irq); | 
|  | atl1c_intr(adapter->pdev->irq, netdev); | 
|  | enable_irq(adapter->pdev->irq); | 
|  | } | 
|  | #endif | 
|  |  | 
|  | static inline u16 atl1c_tpd_avail(struct atl1c_adapter *adapter, enum atl1c_trans_queue type) | 
|  | { | 
|  | struct atl1c_tpd_ring *tpd_ring = &adapter->tpd_ring[type]; | 
|  | u16 next_to_use = 0; | 
|  | u16 next_to_clean = 0; | 
|  |  | 
|  | next_to_clean = atomic_read(&tpd_ring->next_to_clean); | 
|  | next_to_use   = tpd_ring->next_to_use; | 
|  |  | 
|  | return (u16)(next_to_clean > next_to_use) ? | 
|  | (next_to_clean - next_to_use - 1) : | 
|  | (tpd_ring->count + next_to_clean - next_to_use - 1); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * get next usable tpd | 
|  | * Note: should call atl1c_tdp_avail to make sure | 
|  | * there is enough tpd to use | 
|  | */ | 
|  | static struct atl1c_tpd_desc *atl1c_get_tpd(struct atl1c_adapter *adapter, | 
|  | enum atl1c_trans_queue type) | 
|  | { | 
|  | struct atl1c_tpd_ring *tpd_ring = &adapter->tpd_ring[type]; | 
|  | struct atl1c_tpd_desc *tpd_desc; | 
|  | u16 next_to_use = 0; | 
|  |  | 
|  | next_to_use = tpd_ring->next_to_use; | 
|  | if (++tpd_ring->next_to_use == tpd_ring->count) | 
|  | tpd_ring->next_to_use = 0; | 
|  | tpd_desc = ATL1C_TPD_DESC(tpd_ring, next_to_use); | 
|  | memset(tpd_desc, 0, sizeof(struct atl1c_tpd_desc)); | 
|  | return	tpd_desc; | 
|  | } | 
|  |  | 
|  | static struct atl1c_buffer * | 
|  | atl1c_get_tx_buffer(struct atl1c_adapter *adapter, struct atl1c_tpd_desc *tpd) | 
|  | { | 
|  | struct atl1c_tpd_ring *tpd_ring = adapter->tpd_ring; | 
|  |  | 
|  | return &tpd_ring->buffer_info[tpd - | 
|  | (struct atl1c_tpd_desc *)tpd_ring->desc]; | 
|  | } | 
|  |  | 
|  | /* Calculate the transmit packet descript needed*/ | 
|  | static u16 atl1c_cal_tpd_req(const struct sk_buff *skb) | 
|  | { | 
|  | u16 tpd_req; | 
|  | u16 proto_hdr_len = 0; | 
|  |  | 
|  | tpd_req = skb_shinfo(skb)->nr_frags + 1; | 
|  |  | 
|  | if (skb_is_gso(skb)) { | 
|  | proto_hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb); | 
|  | if (proto_hdr_len < skb_headlen(skb)) | 
|  | tpd_req++; | 
|  | if (skb_shinfo(skb)->gso_type & SKB_GSO_TCPV6) | 
|  | tpd_req++; | 
|  | } | 
|  | return tpd_req; | 
|  | } | 
|  |  | 
|  | static int atl1c_tso_csum(struct atl1c_adapter *adapter, | 
|  | struct sk_buff *skb, | 
|  | struct atl1c_tpd_desc **tpd, | 
|  | enum atl1c_trans_queue type) | 
|  | { | 
|  | struct pci_dev *pdev = adapter->pdev; | 
|  | u8 hdr_len; | 
|  | u32 real_len; | 
|  | unsigned short offload_type; | 
|  | int err; | 
|  |  | 
|  | if (skb_is_gso(skb)) { | 
|  | if (skb_header_cloned(skb)) { | 
|  | err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC); | 
|  | if (unlikely(err)) | 
|  | return -1; | 
|  | } | 
|  | offload_type = skb_shinfo(skb)->gso_type; | 
|  |  | 
|  | if (offload_type & SKB_GSO_TCPV4) { | 
|  | real_len = (((unsigned char *)ip_hdr(skb) - skb->data) | 
|  | + ntohs(ip_hdr(skb)->tot_len)); | 
|  |  | 
|  | if (real_len < skb->len) | 
|  | pskb_trim(skb, real_len); | 
|  |  | 
|  | hdr_len = (skb_transport_offset(skb) + tcp_hdrlen(skb)); | 
|  | if (unlikely(skb->len == hdr_len)) { | 
|  | /* only xsum need */ | 
|  | if (netif_msg_tx_queued(adapter)) | 
|  | dev_warn(&pdev->dev, | 
|  | "IPV4 tso with zero data??\n"); | 
|  | goto check_sum; | 
|  | } else { | 
|  | ip_hdr(skb)->check = 0; | 
|  | tcp_hdr(skb)->check = ~csum_tcpudp_magic( | 
|  | ip_hdr(skb)->saddr, | 
|  | ip_hdr(skb)->daddr, | 
|  | 0, IPPROTO_TCP, 0); | 
|  | (*tpd)->word1 |= 1 << TPD_IPV4_PACKET_SHIFT; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (offload_type & SKB_GSO_TCPV6) { | 
|  | struct atl1c_tpd_ext_desc *etpd = | 
|  | *(struct atl1c_tpd_ext_desc **)(tpd); | 
|  |  | 
|  | memset(etpd, 0, sizeof(struct atl1c_tpd_ext_desc)); | 
|  | *tpd = atl1c_get_tpd(adapter, type); | 
|  | ipv6_hdr(skb)->payload_len = 0; | 
|  | /* check payload == 0 byte ? */ | 
|  | hdr_len = (skb_transport_offset(skb) + tcp_hdrlen(skb)); | 
|  | if (unlikely(skb->len == hdr_len)) { | 
|  | /* only xsum need */ | 
|  | if (netif_msg_tx_queued(adapter)) | 
|  | dev_warn(&pdev->dev, | 
|  | "IPV6 tso with zero data??\n"); | 
|  | goto check_sum; | 
|  | } else | 
|  | tcp_hdr(skb)->check = ~csum_ipv6_magic( | 
|  | &ipv6_hdr(skb)->saddr, | 
|  | &ipv6_hdr(skb)->daddr, | 
|  | 0, IPPROTO_TCP, 0); | 
|  | etpd->word1 |= 1 << TPD_LSO_EN_SHIFT; | 
|  | etpd->word1 |= 1 << TPD_LSO_VER_SHIFT; | 
|  | etpd->pkt_len = cpu_to_le32(skb->len); | 
|  | (*tpd)->word1 |= 1 << TPD_LSO_VER_SHIFT; | 
|  | } | 
|  |  | 
|  | (*tpd)->word1 |= 1 << TPD_LSO_EN_SHIFT; | 
|  | (*tpd)->word1 |= (skb_transport_offset(skb) & TPD_TCPHDR_OFFSET_MASK) << | 
|  | TPD_TCPHDR_OFFSET_SHIFT; | 
|  | (*tpd)->word1 |= (skb_shinfo(skb)->gso_size & TPD_MSS_MASK) << | 
|  | TPD_MSS_SHIFT; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | check_sum: | 
|  | if (likely(skb->ip_summed == CHECKSUM_PARTIAL)) { | 
|  | u8 css, cso; | 
|  | cso = skb_checksum_start_offset(skb); | 
|  |  | 
|  | if (unlikely(cso & 0x1)) { | 
|  | if (netif_msg_tx_err(adapter)) | 
|  | dev_err(&adapter->pdev->dev, | 
|  | "payload offset should not an event number\n"); | 
|  | return -1; | 
|  | } else { | 
|  | css = cso + skb->csum_offset; | 
|  |  | 
|  | (*tpd)->word1 |= ((cso >> 1) & TPD_PLOADOFFSET_MASK) << | 
|  | TPD_PLOADOFFSET_SHIFT; | 
|  | (*tpd)->word1 |= ((css >> 1) & TPD_CCSUM_OFFSET_MASK) << | 
|  | TPD_CCSUM_OFFSET_SHIFT; | 
|  | (*tpd)->word1 |= 1 << TPD_CCSUM_EN_SHIFT; | 
|  | } | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void atl1c_tx_map(struct atl1c_adapter *adapter, | 
|  | struct sk_buff *skb, struct atl1c_tpd_desc *tpd, | 
|  | enum atl1c_trans_queue type) | 
|  | { | 
|  | struct atl1c_tpd_desc *use_tpd = NULL; | 
|  | struct atl1c_buffer *buffer_info = NULL; | 
|  | u16 buf_len = skb_headlen(skb); | 
|  | u16 map_len = 0; | 
|  | u16 mapped_len = 0; | 
|  | u16 hdr_len = 0; | 
|  | u16 nr_frags; | 
|  | u16 f; | 
|  | int tso; | 
|  |  | 
|  | nr_frags = skb_shinfo(skb)->nr_frags; | 
|  | tso = (tpd->word1 >> TPD_LSO_EN_SHIFT) & TPD_LSO_EN_MASK; | 
|  | if (tso) { | 
|  | /* TSO */ | 
|  | map_len = hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb); | 
|  | use_tpd = tpd; | 
|  |  | 
|  | buffer_info = atl1c_get_tx_buffer(adapter, use_tpd); | 
|  | buffer_info->length = map_len; | 
|  | buffer_info->dma = pci_map_single(adapter->pdev, | 
|  | skb->data, hdr_len, PCI_DMA_TODEVICE); | 
|  | ATL1C_SET_BUFFER_STATE(buffer_info, ATL1C_BUFFER_BUSY); | 
|  | ATL1C_SET_PCIMAP_TYPE(buffer_info, ATL1C_PCIMAP_SINGLE, | 
|  | ATL1C_PCIMAP_TODEVICE); | 
|  | mapped_len += map_len; | 
|  | use_tpd->buffer_addr = cpu_to_le64(buffer_info->dma); | 
|  | use_tpd->buffer_len = cpu_to_le16(buffer_info->length); | 
|  | } | 
|  |  | 
|  | if (mapped_len < buf_len) { | 
|  | /* mapped_len == 0, means we should use the first tpd, | 
|  | which is given by caller  */ | 
|  | if (mapped_len == 0) | 
|  | use_tpd = tpd; | 
|  | else { | 
|  | use_tpd = atl1c_get_tpd(adapter, type); | 
|  | memcpy(use_tpd, tpd, sizeof(struct atl1c_tpd_desc)); | 
|  | } | 
|  | buffer_info = atl1c_get_tx_buffer(adapter, use_tpd); | 
|  | buffer_info->length = buf_len - mapped_len; | 
|  | buffer_info->dma = | 
|  | pci_map_single(adapter->pdev, skb->data + mapped_len, | 
|  | buffer_info->length, PCI_DMA_TODEVICE); | 
|  | ATL1C_SET_BUFFER_STATE(buffer_info, ATL1C_BUFFER_BUSY); | 
|  | ATL1C_SET_PCIMAP_TYPE(buffer_info, ATL1C_PCIMAP_SINGLE, | 
|  | ATL1C_PCIMAP_TODEVICE); | 
|  | use_tpd->buffer_addr = cpu_to_le64(buffer_info->dma); | 
|  | use_tpd->buffer_len  = cpu_to_le16(buffer_info->length); | 
|  | } | 
|  |  | 
|  | for (f = 0; f < nr_frags; f++) { | 
|  | struct skb_frag_struct *frag; | 
|  |  | 
|  | frag = &skb_shinfo(skb)->frags[f]; | 
|  |  | 
|  | use_tpd = atl1c_get_tpd(adapter, type); | 
|  | memcpy(use_tpd, tpd, sizeof(struct atl1c_tpd_desc)); | 
|  |  | 
|  | buffer_info = atl1c_get_tx_buffer(adapter, use_tpd); | 
|  | buffer_info->length = frag->size; | 
|  | buffer_info->dma = | 
|  | pci_map_page(adapter->pdev, frag->page, | 
|  | frag->page_offset, | 
|  | buffer_info->length, | 
|  | PCI_DMA_TODEVICE); | 
|  | ATL1C_SET_BUFFER_STATE(buffer_info, ATL1C_BUFFER_BUSY); | 
|  | ATL1C_SET_PCIMAP_TYPE(buffer_info, ATL1C_PCIMAP_PAGE, | 
|  | ATL1C_PCIMAP_TODEVICE); | 
|  | use_tpd->buffer_addr = cpu_to_le64(buffer_info->dma); | 
|  | use_tpd->buffer_len  = cpu_to_le16(buffer_info->length); | 
|  | } | 
|  |  | 
|  | /* The last tpd */ | 
|  | use_tpd->word1 |= 1 << TPD_EOP_SHIFT; | 
|  | /* The last buffer info contain the skb address, | 
|  | so it will be free after unmap */ | 
|  | buffer_info->skb = skb; | 
|  | } | 
|  |  | 
|  | static void atl1c_tx_queue(struct atl1c_adapter *adapter, struct sk_buff *skb, | 
|  | struct atl1c_tpd_desc *tpd, enum atl1c_trans_queue type) | 
|  | { | 
|  | struct atl1c_tpd_ring *tpd_ring = &adapter->tpd_ring[type]; | 
|  | u32 prod_data; | 
|  |  | 
|  | AT_READ_REG(&adapter->hw, REG_MB_PRIO_PROD_IDX, &prod_data); | 
|  | switch (type) { | 
|  | case atl1c_trans_high: | 
|  | prod_data &= 0xFFFF0000; | 
|  | prod_data |= tpd_ring->next_to_use & 0xFFFF; | 
|  | break; | 
|  | case atl1c_trans_normal: | 
|  | prod_data &= 0x0000FFFF; | 
|  | prod_data |= (tpd_ring->next_to_use & 0xFFFF) << 16; | 
|  | break; | 
|  | default: | 
|  | break; | 
|  | } | 
|  | wmb(); | 
|  | AT_WRITE_REG(&adapter->hw, REG_MB_PRIO_PROD_IDX, prod_data); | 
|  | } | 
|  |  | 
|  | static netdev_tx_t atl1c_xmit_frame(struct sk_buff *skb, | 
|  | struct net_device *netdev) | 
|  | { | 
|  | struct atl1c_adapter *adapter = netdev_priv(netdev); | 
|  | unsigned long flags; | 
|  | u16 tpd_req = 1; | 
|  | struct atl1c_tpd_desc *tpd; | 
|  | enum atl1c_trans_queue type = atl1c_trans_normal; | 
|  |  | 
|  | if (test_bit(__AT_DOWN, &adapter->flags)) { | 
|  | dev_kfree_skb_any(skb); | 
|  | return NETDEV_TX_OK; | 
|  | } | 
|  |  | 
|  | tpd_req = atl1c_cal_tpd_req(skb); | 
|  | if (!spin_trylock_irqsave(&adapter->tx_lock, flags)) { | 
|  | if (netif_msg_pktdata(adapter)) | 
|  | dev_info(&adapter->pdev->dev, "tx locked\n"); | 
|  | return NETDEV_TX_LOCKED; | 
|  | } | 
|  | if (skb->mark == 0x01) | 
|  | type = atl1c_trans_high; | 
|  | else | 
|  | type = atl1c_trans_normal; | 
|  |  | 
|  | if (atl1c_tpd_avail(adapter, type) < tpd_req) { | 
|  | /* no enough descriptor, just stop queue */ | 
|  | netif_stop_queue(netdev); | 
|  | spin_unlock_irqrestore(&adapter->tx_lock, flags); | 
|  | return NETDEV_TX_BUSY; | 
|  | } | 
|  |  | 
|  | tpd = atl1c_get_tpd(adapter, type); | 
|  |  | 
|  | /* do TSO and check sum */ | 
|  | if (atl1c_tso_csum(adapter, skb, &tpd, type) != 0) { | 
|  | spin_unlock_irqrestore(&adapter->tx_lock, flags); | 
|  | dev_kfree_skb_any(skb); | 
|  | return NETDEV_TX_OK; | 
|  | } | 
|  |  | 
|  | if (unlikely(vlan_tx_tag_present(skb))) { | 
|  | u16 vlan = vlan_tx_tag_get(skb); | 
|  | __le16 tag; | 
|  |  | 
|  | vlan = cpu_to_le16(vlan); | 
|  | AT_VLAN_TO_TAG(vlan, tag); | 
|  | tpd->word1 |= 1 << TPD_INS_VTAG_SHIFT; | 
|  | tpd->vlan_tag = tag; | 
|  | } | 
|  |  | 
|  | if (skb_network_offset(skb) != ETH_HLEN) | 
|  | tpd->word1 |= 1 << TPD_ETH_TYPE_SHIFT; /* Ethernet frame */ | 
|  |  | 
|  | atl1c_tx_map(adapter, skb, tpd, type); | 
|  | atl1c_tx_queue(adapter, skb, tpd, type); | 
|  |  | 
|  | spin_unlock_irqrestore(&adapter->tx_lock, flags); | 
|  | return NETDEV_TX_OK; | 
|  | } | 
|  |  | 
|  | static void atl1c_free_irq(struct atl1c_adapter *adapter) | 
|  | { | 
|  | struct net_device *netdev = adapter->netdev; | 
|  |  | 
|  | free_irq(adapter->pdev->irq, netdev); | 
|  |  | 
|  | if (adapter->have_msi) | 
|  | pci_disable_msi(adapter->pdev); | 
|  | } | 
|  |  | 
|  | static int atl1c_request_irq(struct atl1c_adapter *adapter) | 
|  | { | 
|  | struct pci_dev    *pdev   = adapter->pdev; | 
|  | struct net_device *netdev = adapter->netdev; | 
|  | int flags = 0; | 
|  | int err = 0; | 
|  |  | 
|  | adapter->have_msi = true; | 
|  | err = pci_enable_msi(adapter->pdev); | 
|  | if (err) { | 
|  | if (netif_msg_ifup(adapter)) | 
|  | dev_err(&pdev->dev, | 
|  | "Unable to allocate MSI interrupt Error: %d\n", | 
|  | err); | 
|  | adapter->have_msi = false; | 
|  | } else | 
|  | netdev->irq = pdev->irq; | 
|  |  | 
|  | if (!adapter->have_msi) | 
|  | flags |= IRQF_SHARED; | 
|  | err = request_irq(adapter->pdev->irq, atl1c_intr, flags, | 
|  | netdev->name, netdev); | 
|  | if (err) { | 
|  | if (netif_msg_ifup(adapter)) | 
|  | dev_err(&pdev->dev, | 
|  | "Unable to allocate interrupt Error: %d\n", | 
|  | err); | 
|  | if (adapter->have_msi) | 
|  | pci_disable_msi(adapter->pdev); | 
|  | return err; | 
|  | } | 
|  | if (netif_msg_ifup(adapter)) | 
|  | dev_dbg(&pdev->dev, "atl1c_request_irq OK\n"); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static int atl1c_up(struct atl1c_adapter *adapter) | 
|  | { | 
|  | struct net_device *netdev = adapter->netdev; | 
|  | int num; | 
|  | int err; | 
|  | int i; | 
|  |  | 
|  | netif_carrier_off(netdev); | 
|  | atl1c_init_ring_ptrs(adapter); | 
|  | atl1c_set_multi(netdev); | 
|  | atl1c_restore_vlan(adapter); | 
|  |  | 
|  | for (i = 0; i < adapter->num_rx_queues; i++) { | 
|  | num = atl1c_alloc_rx_buffer(adapter, i); | 
|  | if (unlikely(num == 0)) { | 
|  | err = -ENOMEM; | 
|  | goto err_alloc_rx; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (atl1c_configure(adapter)) { | 
|  | err = -EIO; | 
|  | goto err_up; | 
|  | } | 
|  |  | 
|  | err = atl1c_request_irq(adapter); | 
|  | if (unlikely(err)) | 
|  | goto err_up; | 
|  |  | 
|  | clear_bit(__AT_DOWN, &adapter->flags); | 
|  | napi_enable(&adapter->napi); | 
|  | atl1c_irq_enable(adapter); | 
|  | atl1c_check_link_status(adapter); | 
|  | netif_start_queue(netdev); | 
|  | return err; | 
|  |  | 
|  | err_up: | 
|  | err_alloc_rx: | 
|  | atl1c_clean_rx_ring(adapter); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static void atl1c_down(struct atl1c_adapter *adapter) | 
|  | { | 
|  | struct net_device *netdev = adapter->netdev; | 
|  |  | 
|  | atl1c_del_timer(adapter); | 
|  | adapter->work_event = 0; /* clear all event */ | 
|  | /* signal that we're down so the interrupt handler does not | 
|  | * reschedule our watchdog timer */ | 
|  | set_bit(__AT_DOWN, &adapter->flags); | 
|  | netif_carrier_off(netdev); | 
|  | napi_disable(&adapter->napi); | 
|  | atl1c_irq_disable(adapter); | 
|  | atl1c_free_irq(adapter); | 
|  | /* reset MAC to disable all RX/TX */ | 
|  | atl1c_reset_mac(&adapter->hw); | 
|  | msleep(1); | 
|  |  | 
|  | adapter->link_speed = SPEED_0; | 
|  | adapter->link_duplex = -1; | 
|  | atl1c_clean_tx_ring(adapter, atl1c_trans_normal); | 
|  | atl1c_clean_tx_ring(adapter, atl1c_trans_high); | 
|  | atl1c_clean_rx_ring(adapter); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * atl1c_open - Called when a network interface is made active | 
|  | * @netdev: network interface device structure | 
|  | * | 
|  | * Returns 0 on success, negative value on failure | 
|  | * | 
|  | * The open entry point is called when a network interface is made | 
|  | * active by the system (IFF_UP).  At this point all resources needed | 
|  | * for transmit and receive operations are allocated, the interrupt | 
|  | * handler is registered with the OS, the watchdog timer is started, | 
|  | * and the stack is notified that the interface is ready. | 
|  | */ | 
|  | static int atl1c_open(struct net_device *netdev) | 
|  | { | 
|  | struct atl1c_adapter *adapter = netdev_priv(netdev); | 
|  | int err; | 
|  |  | 
|  | /* disallow open during test */ | 
|  | if (test_bit(__AT_TESTING, &adapter->flags)) | 
|  | return -EBUSY; | 
|  |  | 
|  | /* allocate rx/tx dma buffer & descriptors */ | 
|  | err = atl1c_setup_ring_resources(adapter); | 
|  | if (unlikely(err)) | 
|  | return err; | 
|  |  | 
|  | err = atl1c_up(adapter); | 
|  | if (unlikely(err)) | 
|  | goto err_up; | 
|  |  | 
|  | if (adapter->hw.ctrl_flags & ATL1C_FPGA_VERSION) { | 
|  | u32 phy_data; | 
|  |  | 
|  | AT_READ_REG(&adapter->hw, REG_MDIO_CTRL, &phy_data); | 
|  | phy_data |= MDIO_AP_EN; | 
|  | AT_WRITE_REG(&adapter->hw, REG_MDIO_CTRL, phy_data); | 
|  | } | 
|  | return 0; | 
|  |  | 
|  | err_up: | 
|  | atl1c_free_irq(adapter); | 
|  | atl1c_free_ring_resources(adapter); | 
|  | atl1c_reset_mac(&adapter->hw); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * atl1c_close - Disables a network interface | 
|  | * @netdev: network interface device structure | 
|  | * | 
|  | * Returns 0, this is not allowed to fail | 
|  | * | 
|  | * The close entry point is called when an interface is de-activated | 
|  | * by the OS.  The hardware is still under the drivers control, but | 
|  | * needs to be disabled.  A global MAC reset is issued to stop the | 
|  | * hardware, and all transmit and receive resources are freed. | 
|  | */ | 
|  | static int atl1c_close(struct net_device *netdev) | 
|  | { | 
|  | struct atl1c_adapter *adapter = netdev_priv(netdev); | 
|  |  | 
|  | WARN_ON(test_bit(__AT_RESETTING, &adapter->flags)); | 
|  | atl1c_down(adapter); | 
|  | atl1c_free_ring_resources(adapter); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int atl1c_suspend(struct device *dev) | 
|  | { | 
|  | struct pci_dev *pdev = to_pci_dev(dev); | 
|  | struct net_device *netdev = pci_get_drvdata(pdev); | 
|  | struct atl1c_adapter *adapter = netdev_priv(netdev); | 
|  | struct atl1c_hw *hw = &adapter->hw; | 
|  | u32 mac_ctrl_data = 0; | 
|  | u32 master_ctrl_data = 0; | 
|  | u32 wol_ctrl_data = 0; | 
|  | u16 mii_intr_status_data = 0; | 
|  | u32 wufc = adapter->wol; | 
|  |  | 
|  | atl1c_disable_l0s_l1(hw); | 
|  | if (netif_running(netdev)) { | 
|  | WARN_ON(test_bit(__AT_RESETTING, &adapter->flags)); | 
|  | atl1c_down(adapter); | 
|  | } | 
|  | netif_device_detach(netdev); | 
|  |  | 
|  | if (wufc) | 
|  | if (atl1c_phy_power_saving(hw) != 0) | 
|  | dev_dbg(&pdev->dev, "phy power saving failed"); | 
|  |  | 
|  | AT_READ_REG(hw, REG_MASTER_CTRL, &master_ctrl_data); | 
|  | AT_READ_REG(hw, REG_MAC_CTRL, &mac_ctrl_data); | 
|  |  | 
|  | master_ctrl_data &= ~MASTER_CTRL_CLK_SEL_DIS; | 
|  | mac_ctrl_data &= ~(MAC_CTRL_PRMLEN_MASK << MAC_CTRL_PRMLEN_SHIFT); | 
|  | mac_ctrl_data |= (((u32)adapter->hw.preamble_len & | 
|  | MAC_CTRL_PRMLEN_MASK) << | 
|  | MAC_CTRL_PRMLEN_SHIFT); | 
|  | mac_ctrl_data &= ~(MAC_CTRL_SPEED_MASK << MAC_CTRL_SPEED_SHIFT); | 
|  | mac_ctrl_data &= ~MAC_CTRL_DUPLX; | 
|  |  | 
|  | if (wufc) { | 
|  | mac_ctrl_data |= MAC_CTRL_RX_EN; | 
|  | if (adapter->link_speed == SPEED_1000 || | 
|  | adapter->link_speed == SPEED_0) { | 
|  | mac_ctrl_data |= atl1c_mac_speed_1000 << | 
|  | MAC_CTRL_SPEED_SHIFT; | 
|  | mac_ctrl_data |= MAC_CTRL_DUPLX; | 
|  | } else | 
|  | mac_ctrl_data |= atl1c_mac_speed_10_100 << | 
|  | MAC_CTRL_SPEED_SHIFT; | 
|  |  | 
|  | if (adapter->link_duplex == DUPLEX_FULL) | 
|  | mac_ctrl_data |= MAC_CTRL_DUPLX; | 
|  |  | 
|  | /* turn on magic packet wol */ | 
|  | if (wufc & AT_WUFC_MAG) | 
|  | wol_ctrl_data |= WOL_MAGIC_EN | WOL_MAGIC_PME_EN; | 
|  |  | 
|  | if (wufc & AT_WUFC_LNKC) { | 
|  | wol_ctrl_data |=  WOL_LINK_CHG_EN | WOL_LINK_CHG_PME_EN; | 
|  | /* only link up can wake up */ | 
|  | if (atl1c_write_phy_reg(hw, MII_IER, IER_LINK_UP) != 0) { | 
|  | dev_dbg(&pdev->dev, "%s: read write phy " | 
|  | "register failed.\n", | 
|  | atl1c_driver_name); | 
|  | } | 
|  | } | 
|  | /* clear phy interrupt */ | 
|  | atl1c_read_phy_reg(hw, MII_ISR, &mii_intr_status_data); | 
|  | /* Config MAC Ctrl register */ | 
|  | __atl1c_vlan_mode(netdev->features, &mac_ctrl_data); | 
|  |  | 
|  | /* magic packet maybe Broadcast&multicast&Unicast frame */ | 
|  | if (wufc & AT_WUFC_MAG) | 
|  | mac_ctrl_data |= MAC_CTRL_BC_EN; | 
|  |  | 
|  | dev_dbg(&pdev->dev, | 
|  | "%s: suspend MAC=0x%x\n", | 
|  | atl1c_driver_name, mac_ctrl_data); | 
|  | AT_WRITE_REG(hw, REG_MASTER_CTRL, master_ctrl_data); | 
|  | AT_WRITE_REG(hw, REG_WOL_CTRL, wol_ctrl_data); | 
|  | AT_WRITE_REG(hw, REG_MAC_CTRL, mac_ctrl_data); | 
|  |  | 
|  | AT_WRITE_REG(hw, REG_GPHY_CTRL, GPHY_CTRL_DEFAULT | | 
|  | GPHY_CTRL_EXT_RESET); | 
|  | } else { | 
|  | AT_WRITE_REG(hw, REG_GPHY_CTRL, GPHY_CTRL_POWER_SAVING); | 
|  | master_ctrl_data |= MASTER_CTRL_CLK_SEL_DIS; | 
|  | mac_ctrl_data |= atl1c_mac_speed_10_100 << MAC_CTRL_SPEED_SHIFT; | 
|  | mac_ctrl_data |= MAC_CTRL_DUPLX; | 
|  | AT_WRITE_REG(hw, REG_MASTER_CTRL, master_ctrl_data); | 
|  | AT_WRITE_REG(hw, REG_MAC_CTRL, mac_ctrl_data); | 
|  | AT_WRITE_REG(hw, REG_WOL_CTRL, 0); | 
|  | hw->phy_configured = false; /* re-init PHY when resume */ | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_PM_SLEEP | 
|  | static int atl1c_resume(struct device *dev) | 
|  | { | 
|  | struct pci_dev *pdev = to_pci_dev(dev); | 
|  | struct net_device *netdev = pci_get_drvdata(pdev); | 
|  | struct atl1c_adapter *adapter = netdev_priv(netdev); | 
|  |  | 
|  | AT_WRITE_REG(&adapter->hw, REG_WOL_CTRL, 0); | 
|  | atl1c_reset_pcie(&adapter->hw, ATL1C_PCIE_L0S_L1_DISABLE | | 
|  | ATL1C_PCIE_PHY_RESET); | 
|  |  | 
|  | atl1c_phy_reset(&adapter->hw); | 
|  | atl1c_reset_mac(&adapter->hw); | 
|  | atl1c_phy_init(&adapter->hw); | 
|  |  | 
|  | #if 0 | 
|  | AT_READ_REG(&adapter->hw, REG_PM_CTRLSTAT, &pm_data); | 
|  | pm_data &= ~PM_CTRLSTAT_PME_EN; | 
|  | AT_WRITE_REG(&adapter->hw, REG_PM_CTRLSTAT, pm_data); | 
|  | #endif | 
|  |  | 
|  | netif_device_attach(netdev); | 
|  | if (netif_running(netdev)) | 
|  | atl1c_up(adapter); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | static void atl1c_shutdown(struct pci_dev *pdev) | 
|  | { | 
|  | struct net_device *netdev = pci_get_drvdata(pdev); | 
|  | struct atl1c_adapter *adapter = netdev_priv(netdev); | 
|  |  | 
|  | atl1c_suspend(&pdev->dev); | 
|  | pci_wake_from_d3(pdev, adapter->wol); | 
|  | pci_set_power_state(pdev, PCI_D3hot); | 
|  | } | 
|  |  | 
|  | static const struct net_device_ops atl1c_netdev_ops = { | 
|  | .ndo_open		= atl1c_open, | 
|  | .ndo_stop		= atl1c_close, | 
|  | .ndo_validate_addr	= eth_validate_addr, | 
|  | .ndo_start_xmit		= atl1c_xmit_frame, | 
|  | .ndo_set_mac_address	= atl1c_set_mac_addr, | 
|  | .ndo_set_multicast_list = atl1c_set_multi, | 
|  | .ndo_change_mtu		= atl1c_change_mtu, | 
|  | .ndo_fix_features	= atl1c_fix_features, | 
|  | .ndo_set_features	= atl1c_set_features, | 
|  | .ndo_do_ioctl		= atl1c_ioctl, | 
|  | .ndo_tx_timeout		= atl1c_tx_timeout, | 
|  | .ndo_get_stats		= atl1c_get_stats, | 
|  | #ifdef CONFIG_NET_POLL_CONTROLLER | 
|  | .ndo_poll_controller	= atl1c_netpoll, | 
|  | #endif | 
|  | }; | 
|  |  | 
|  | static int atl1c_init_netdev(struct net_device *netdev, struct pci_dev *pdev) | 
|  | { | 
|  | SET_NETDEV_DEV(netdev, &pdev->dev); | 
|  | pci_set_drvdata(pdev, netdev); | 
|  |  | 
|  | netdev->irq  = pdev->irq; | 
|  | netdev->netdev_ops = &atl1c_netdev_ops; | 
|  | netdev->watchdog_timeo = AT_TX_WATCHDOG; | 
|  | atl1c_set_ethtool_ops(netdev); | 
|  |  | 
|  | /* TODO: add when ready */ | 
|  | netdev->hw_features =	NETIF_F_SG	   | | 
|  | NETIF_F_HW_CSUM	   | | 
|  | NETIF_F_HW_VLAN_RX | | 
|  | NETIF_F_TSO	   | | 
|  | NETIF_F_TSO6; | 
|  | netdev->features =	netdev->hw_features | | 
|  | NETIF_F_HW_VLAN_TX; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * atl1c_probe - Device Initialization Routine | 
|  | * @pdev: PCI device information struct | 
|  | * @ent: entry in atl1c_pci_tbl | 
|  | * | 
|  | * Returns 0 on success, negative on failure | 
|  | * | 
|  | * atl1c_probe initializes an adapter identified by a pci_dev structure. | 
|  | * The OS initialization, configuring of the adapter private structure, | 
|  | * and a hardware reset occur. | 
|  | */ | 
|  | static int __devinit atl1c_probe(struct pci_dev *pdev, | 
|  | const struct pci_device_id *ent) | 
|  | { | 
|  | struct net_device *netdev; | 
|  | struct atl1c_adapter *adapter; | 
|  | static int cards_found; | 
|  |  | 
|  | int err = 0; | 
|  |  | 
|  | /* enable device (incl. PCI PM wakeup and hotplug setup) */ | 
|  | err = pci_enable_device_mem(pdev); | 
|  | if (err) { | 
|  | dev_err(&pdev->dev, "cannot enable PCI device\n"); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * The atl1c chip can DMA to 64-bit addresses, but it uses a single | 
|  | * shared register for the high 32 bits, so only a single, aligned, | 
|  | * 4 GB physical address range can be used at a time. | 
|  | * | 
|  | * Supporting 64-bit DMA on this hardware is more trouble than it's | 
|  | * worth.  It is far easier to limit to 32-bit DMA than update | 
|  | * various kernel subsystems to support the mechanics required by a | 
|  | * fixed-high-32-bit system. | 
|  | */ | 
|  | if ((pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) != 0) || | 
|  | (pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)) != 0)) { | 
|  | dev_err(&pdev->dev, "No usable DMA configuration,aborting\n"); | 
|  | goto err_dma; | 
|  | } | 
|  |  | 
|  | err = pci_request_regions(pdev, atl1c_driver_name); | 
|  | if (err) { | 
|  | dev_err(&pdev->dev, "cannot obtain PCI resources\n"); | 
|  | goto err_pci_reg; | 
|  | } | 
|  |  | 
|  | pci_set_master(pdev); | 
|  |  | 
|  | netdev = alloc_etherdev(sizeof(struct atl1c_adapter)); | 
|  | if (netdev == NULL) { | 
|  | err = -ENOMEM; | 
|  | dev_err(&pdev->dev, "etherdev alloc failed\n"); | 
|  | goto err_alloc_etherdev; | 
|  | } | 
|  |  | 
|  | err = atl1c_init_netdev(netdev, pdev); | 
|  | if (err) { | 
|  | dev_err(&pdev->dev, "init netdevice failed\n"); | 
|  | goto err_init_netdev; | 
|  | } | 
|  | adapter = netdev_priv(netdev); | 
|  | adapter->bd_number = cards_found; | 
|  | adapter->netdev = netdev; | 
|  | adapter->pdev = pdev; | 
|  | adapter->hw.adapter = adapter; | 
|  | adapter->msg_enable = netif_msg_init(-1, atl1c_default_msg); | 
|  | adapter->hw.hw_addr = ioremap(pci_resource_start(pdev, 0), pci_resource_len(pdev, 0)); | 
|  | if (!adapter->hw.hw_addr) { | 
|  | err = -EIO; | 
|  | dev_err(&pdev->dev, "cannot map device registers\n"); | 
|  | goto err_ioremap; | 
|  | } | 
|  | netdev->base_addr = (unsigned long)adapter->hw.hw_addr; | 
|  |  | 
|  | /* init mii data */ | 
|  | adapter->mii.dev = netdev; | 
|  | adapter->mii.mdio_read  = atl1c_mdio_read; | 
|  | adapter->mii.mdio_write = atl1c_mdio_write; | 
|  | adapter->mii.phy_id_mask = 0x1f; | 
|  | adapter->mii.reg_num_mask = MDIO_REG_ADDR_MASK; | 
|  | netif_napi_add(netdev, &adapter->napi, atl1c_clean, 64); | 
|  | setup_timer(&adapter->phy_config_timer, atl1c_phy_config, | 
|  | (unsigned long)adapter); | 
|  | /* setup the private structure */ | 
|  | err = atl1c_sw_init(adapter); | 
|  | if (err) { | 
|  | dev_err(&pdev->dev, "net device private data init failed\n"); | 
|  | goto err_sw_init; | 
|  | } | 
|  | atl1c_reset_pcie(&adapter->hw, ATL1C_PCIE_L0S_L1_DISABLE | | 
|  | ATL1C_PCIE_PHY_RESET); | 
|  |  | 
|  | /* Init GPHY as early as possible due to power saving issue  */ | 
|  | atl1c_phy_reset(&adapter->hw); | 
|  |  | 
|  | err = atl1c_reset_mac(&adapter->hw); | 
|  | if (err) { | 
|  | err = -EIO; | 
|  | goto err_reset; | 
|  | } | 
|  |  | 
|  | /* reset the controller to | 
|  | * put the device in a known good starting state */ | 
|  | err = atl1c_phy_init(&adapter->hw); | 
|  | if (err) { | 
|  | err = -EIO; | 
|  | goto err_reset; | 
|  | } | 
|  | if (atl1c_read_mac_addr(&adapter->hw) != 0) { | 
|  | err = -EIO; | 
|  | dev_err(&pdev->dev, "get mac address failed\n"); | 
|  | goto err_eeprom; | 
|  | } | 
|  | memcpy(netdev->dev_addr, adapter->hw.mac_addr, netdev->addr_len); | 
|  | memcpy(netdev->perm_addr, adapter->hw.mac_addr, netdev->addr_len); | 
|  | if (netif_msg_probe(adapter)) | 
|  | dev_dbg(&pdev->dev, "mac address : %pM\n", | 
|  | adapter->hw.mac_addr); | 
|  |  | 
|  | atl1c_hw_set_mac_addr(&adapter->hw); | 
|  | INIT_WORK(&adapter->common_task, atl1c_common_task); | 
|  | adapter->work_event = 0; | 
|  | err = register_netdev(netdev); | 
|  | if (err) { | 
|  | dev_err(&pdev->dev, "register netdevice failed\n"); | 
|  | goto err_register; | 
|  | } | 
|  |  | 
|  | if (netif_msg_probe(adapter)) | 
|  | dev_info(&pdev->dev, "version %s\n", ATL1C_DRV_VERSION); | 
|  | cards_found++; | 
|  | return 0; | 
|  |  | 
|  | err_reset: | 
|  | err_register: | 
|  | err_sw_init: | 
|  | err_eeprom: | 
|  | iounmap(adapter->hw.hw_addr); | 
|  | err_init_netdev: | 
|  | err_ioremap: | 
|  | free_netdev(netdev); | 
|  | err_alloc_etherdev: | 
|  | pci_release_regions(pdev); | 
|  | err_pci_reg: | 
|  | err_dma: | 
|  | pci_disable_device(pdev); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * atl1c_remove - Device Removal Routine | 
|  | * @pdev: PCI device information struct | 
|  | * | 
|  | * atl1c_remove is called by the PCI subsystem to alert the driver | 
|  | * that it should release a PCI device.  The could be caused by a | 
|  | * Hot-Plug event, or because the driver is going to be removed from | 
|  | * memory. | 
|  | */ | 
|  | static void __devexit atl1c_remove(struct pci_dev *pdev) | 
|  | { | 
|  | struct net_device *netdev = pci_get_drvdata(pdev); | 
|  | struct atl1c_adapter *adapter = netdev_priv(netdev); | 
|  |  | 
|  | unregister_netdev(netdev); | 
|  | atl1c_phy_disable(&adapter->hw); | 
|  |  | 
|  | iounmap(adapter->hw.hw_addr); | 
|  |  | 
|  | pci_release_regions(pdev); | 
|  | pci_disable_device(pdev); | 
|  | free_netdev(netdev); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * atl1c_io_error_detected - called when PCI error is detected | 
|  | * @pdev: Pointer to PCI device | 
|  | * @state: The current pci connection state | 
|  | * | 
|  | * This function is called after a PCI bus error affecting | 
|  | * this device has been detected. | 
|  | */ | 
|  | static pci_ers_result_t atl1c_io_error_detected(struct pci_dev *pdev, | 
|  | pci_channel_state_t state) | 
|  | { | 
|  | struct net_device *netdev = pci_get_drvdata(pdev); | 
|  | struct atl1c_adapter *adapter = netdev_priv(netdev); | 
|  |  | 
|  | netif_device_detach(netdev); | 
|  |  | 
|  | if (state == pci_channel_io_perm_failure) | 
|  | return PCI_ERS_RESULT_DISCONNECT; | 
|  |  | 
|  | if (netif_running(netdev)) | 
|  | atl1c_down(adapter); | 
|  |  | 
|  | pci_disable_device(pdev); | 
|  |  | 
|  | /* Request a slot slot reset. */ | 
|  | return PCI_ERS_RESULT_NEED_RESET; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * atl1c_io_slot_reset - called after the pci bus has been reset. | 
|  | * @pdev: Pointer to PCI device | 
|  | * | 
|  | * Restart the card from scratch, as if from a cold-boot. Implementation | 
|  | * resembles the first-half of the e1000_resume routine. | 
|  | */ | 
|  | static pci_ers_result_t atl1c_io_slot_reset(struct pci_dev *pdev) | 
|  | { | 
|  | struct net_device *netdev = pci_get_drvdata(pdev); | 
|  | struct atl1c_adapter *adapter = netdev_priv(netdev); | 
|  |  | 
|  | if (pci_enable_device(pdev)) { | 
|  | if (netif_msg_hw(adapter)) | 
|  | dev_err(&pdev->dev, | 
|  | "Cannot re-enable PCI device after reset\n"); | 
|  | return PCI_ERS_RESULT_DISCONNECT; | 
|  | } | 
|  | pci_set_master(pdev); | 
|  |  | 
|  | pci_enable_wake(pdev, PCI_D3hot, 0); | 
|  | pci_enable_wake(pdev, PCI_D3cold, 0); | 
|  |  | 
|  | atl1c_reset_mac(&adapter->hw); | 
|  |  | 
|  | return PCI_ERS_RESULT_RECOVERED; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * atl1c_io_resume - called when traffic can start flowing again. | 
|  | * @pdev: Pointer to PCI device | 
|  | * | 
|  | * This callback is called when the error recovery driver tells us that | 
|  | * its OK to resume normal operation. Implementation resembles the | 
|  | * second-half of the atl1c_resume routine. | 
|  | */ | 
|  | static void atl1c_io_resume(struct pci_dev *pdev) | 
|  | { | 
|  | struct net_device *netdev = pci_get_drvdata(pdev); | 
|  | struct atl1c_adapter *adapter = netdev_priv(netdev); | 
|  |  | 
|  | if (netif_running(netdev)) { | 
|  | if (atl1c_up(adapter)) { | 
|  | if (netif_msg_hw(adapter)) | 
|  | dev_err(&pdev->dev, | 
|  | "Cannot bring device back up after reset\n"); | 
|  | return; | 
|  | } | 
|  | } | 
|  |  | 
|  | netif_device_attach(netdev); | 
|  | } | 
|  |  | 
|  | static struct pci_error_handlers atl1c_err_handler = { | 
|  | .error_detected = atl1c_io_error_detected, | 
|  | .slot_reset = atl1c_io_slot_reset, | 
|  | .resume = atl1c_io_resume, | 
|  | }; | 
|  |  | 
|  | static SIMPLE_DEV_PM_OPS(atl1c_pm_ops, atl1c_suspend, atl1c_resume); | 
|  |  | 
|  | static struct pci_driver atl1c_driver = { | 
|  | .name     = atl1c_driver_name, | 
|  | .id_table = atl1c_pci_tbl, | 
|  | .probe    = atl1c_probe, | 
|  | .remove   = __devexit_p(atl1c_remove), | 
|  | .shutdown = atl1c_shutdown, | 
|  | .err_handler = &atl1c_err_handler, | 
|  | .driver.pm = &atl1c_pm_ops, | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * atl1c_init_module - Driver Registration Routine | 
|  | * | 
|  | * atl1c_init_module is the first routine called when the driver is | 
|  | * loaded. All it does is register with the PCI subsystem. | 
|  | */ | 
|  | static int __init atl1c_init_module(void) | 
|  | { | 
|  | return pci_register_driver(&atl1c_driver); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * atl1c_exit_module - Driver Exit Cleanup Routine | 
|  | * | 
|  | * atl1c_exit_module is called just before the driver is removed | 
|  | * from memory. | 
|  | */ | 
|  | static void __exit atl1c_exit_module(void) | 
|  | { | 
|  | pci_unregister_driver(&atl1c_driver); | 
|  | } | 
|  |  | 
|  | module_init(atl1c_init_module); | 
|  | module_exit(atl1c_exit_module); |