| /* |
| * QLogic Fibre Channel HBA Driver |
| * Copyright (c) 2003-2014 QLogic Corporation |
| * |
| * See LICENSE.qla2xxx for copyright and licensing details. |
| */ |
| |
| #include <linux/vmalloc.h> |
| #include <linux/delay.h> |
| |
| #include "qla_def.h" |
| #include "qla_gbl.h" |
| |
| #include <linux/delay.h> |
| |
| #define TIMEOUT_100_MS 100 |
| |
| static const uint32_t qla8044_reg_tbl[] = { |
| QLA8044_PEG_HALT_STATUS1, |
| QLA8044_PEG_HALT_STATUS2, |
| QLA8044_PEG_ALIVE_COUNTER, |
| QLA8044_CRB_DRV_ACTIVE, |
| QLA8044_CRB_DEV_STATE, |
| QLA8044_CRB_DRV_STATE, |
| QLA8044_CRB_DRV_SCRATCH, |
| QLA8044_CRB_DEV_PART_INFO1, |
| QLA8044_CRB_IDC_VER_MAJOR, |
| QLA8044_FW_VER_MAJOR, |
| QLA8044_FW_VER_MINOR, |
| QLA8044_FW_VER_SUB, |
| QLA8044_CMDPEG_STATE, |
| QLA8044_ASIC_TEMP, |
| }; |
| |
| /* 8044 Flash Read/Write functions */ |
| uint32_t |
| qla8044_rd_reg(struct qla_hw_data *ha, ulong addr) |
| { |
| return readl((void __iomem *) (ha->nx_pcibase + addr)); |
| } |
| |
| void |
| qla8044_wr_reg(struct qla_hw_data *ha, ulong addr, uint32_t val) |
| { |
| writel(val, (void __iomem *)((ha)->nx_pcibase + addr)); |
| } |
| |
| int |
| qla8044_rd_direct(struct scsi_qla_host *vha, |
| const uint32_t crb_reg) |
| { |
| struct qla_hw_data *ha = vha->hw; |
| |
| if (crb_reg < CRB_REG_INDEX_MAX) |
| return qla8044_rd_reg(ha, qla8044_reg_tbl[crb_reg]); |
| else |
| return QLA_FUNCTION_FAILED; |
| } |
| |
| void |
| qla8044_wr_direct(struct scsi_qla_host *vha, |
| const uint32_t crb_reg, |
| const uint32_t value) |
| { |
| struct qla_hw_data *ha = vha->hw; |
| |
| if (crb_reg < CRB_REG_INDEX_MAX) |
| qla8044_wr_reg(ha, qla8044_reg_tbl[crb_reg], value); |
| } |
| |
| static int |
| qla8044_set_win_base(scsi_qla_host_t *vha, uint32_t addr) |
| { |
| uint32_t val; |
| int ret_val = QLA_SUCCESS; |
| struct qla_hw_data *ha = vha->hw; |
| |
| qla8044_wr_reg(ha, QLA8044_CRB_WIN_FUNC(ha->portnum), addr); |
| val = qla8044_rd_reg(ha, QLA8044_CRB_WIN_FUNC(ha->portnum)); |
| |
| if (val != addr) { |
| ql_log(ql_log_warn, vha, 0xb087, |
| "%s: Failed to set register window : " |
| "addr written 0x%x, read 0x%x!\n", |
| __func__, addr, val); |
| ret_val = QLA_FUNCTION_FAILED; |
| } |
| return ret_val; |
| } |
| |
| static int |
| qla8044_rd_reg_indirect(scsi_qla_host_t *vha, uint32_t addr, uint32_t *data) |
| { |
| int ret_val = QLA_SUCCESS; |
| struct qla_hw_data *ha = vha->hw; |
| |
| ret_val = qla8044_set_win_base(vha, addr); |
| if (!ret_val) |
| *data = qla8044_rd_reg(ha, QLA8044_WILDCARD); |
| else |
| ql_log(ql_log_warn, vha, 0xb088, |
| "%s: failed read of addr 0x%x!\n", __func__, addr); |
| return ret_val; |
| } |
| |
| static int |
| qla8044_wr_reg_indirect(scsi_qla_host_t *vha, uint32_t addr, uint32_t data) |
| { |
| int ret_val = QLA_SUCCESS; |
| struct qla_hw_data *ha = vha->hw; |
| |
| ret_val = qla8044_set_win_base(vha, addr); |
| if (!ret_val) |
| qla8044_wr_reg(ha, QLA8044_WILDCARD, data); |
| else |
| ql_log(ql_log_warn, vha, 0xb089, |
| "%s: failed wrt to addr 0x%x, data 0x%x\n", |
| __func__, addr, data); |
| return ret_val; |
| } |
| |
| /* |
| * qla8044_read_write_crb_reg - Read from raddr and write value to waddr. |
| * |
| * @ha : Pointer to adapter structure |
| * @raddr : CRB address to read from |
| * @waddr : CRB address to write to |
| * |
| */ |
| static void |
| qla8044_read_write_crb_reg(struct scsi_qla_host *vha, |
| uint32_t raddr, uint32_t waddr) |
| { |
| uint32_t value; |
| |
| qla8044_rd_reg_indirect(vha, raddr, &value); |
| qla8044_wr_reg_indirect(vha, waddr, value); |
| } |
| |
| static int |
| qla8044_poll_wait_for_ready(struct scsi_qla_host *vha, uint32_t addr1, |
| uint32_t mask) |
| { |
| unsigned long timeout; |
| uint32_t temp; |
| |
| /* jiffies after 100ms */ |
| timeout = jiffies + msecs_to_jiffies(TIMEOUT_100_MS); |
| do { |
| qla8044_rd_reg_indirect(vha, addr1, &temp); |
| if ((temp & mask) != 0) |
| break; |
| if (time_after_eq(jiffies, timeout)) { |
| ql_log(ql_log_warn, vha, 0xb151, |
| "Error in processing rdmdio entry\n"); |
| return -1; |
| } |
| } while (1); |
| |
| return 0; |
| } |
| |
| static uint32_t |
| qla8044_ipmdio_rd_reg(struct scsi_qla_host *vha, |
| uint32_t addr1, uint32_t addr3, uint32_t mask, uint32_t addr) |
| { |
| uint32_t temp; |
| int ret = 0; |
| |
| ret = qla8044_poll_wait_for_ready(vha, addr1, mask); |
| if (ret == -1) |
| return -1; |
| |
| temp = (0x40000000 | addr); |
| qla8044_wr_reg_indirect(vha, addr1, temp); |
| |
| ret = qla8044_poll_wait_for_ready(vha, addr1, mask); |
| if (ret == -1) |
| return 0; |
| |
| qla8044_rd_reg_indirect(vha, addr3, &ret); |
| |
| return ret; |
| } |
| |
| |
| static int |
| qla8044_poll_wait_ipmdio_bus_idle(struct scsi_qla_host *vha, |
| uint32_t addr1, uint32_t addr2, uint32_t addr3, uint32_t mask) |
| { |
| unsigned long timeout; |
| uint32_t temp; |
| |
| /* jiffies after 100 msecs */ |
| timeout = jiffies + msecs_to_jiffies(TIMEOUT_100_MS); |
| do { |
| temp = qla8044_ipmdio_rd_reg(vha, addr1, addr3, mask, addr2); |
| if ((temp & 0x1) != 1) |
| break; |
| if (time_after_eq(jiffies, timeout)) { |
| ql_log(ql_log_warn, vha, 0xb152, |
| "Error in processing mdiobus idle\n"); |
| return -1; |
| } |
| } while (1); |
| |
| return 0; |
| } |
| |
| static int |
| qla8044_ipmdio_wr_reg(struct scsi_qla_host *vha, uint32_t addr1, |
| uint32_t addr3, uint32_t mask, uint32_t addr, uint32_t value) |
| { |
| int ret = 0; |
| |
| ret = qla8044_poll_wait_for_ready(vha, addr1, mask); |
| if (ret == -1) |
| return -1; |
| |
| qla8044_wr_reg_indirect(vha, addr3, value); |
| qla8044_wr_reg_indirect(vha, addr1, addr); |
| |
| ret = qla8044_poll_wait_for_ready(vha, addr1, mask); |
| if (ret == -1) |
| return -1; |
| |
| return 0; |
| } |
| /* |
| * qla8044_rmw_crb_reg - Read value from raddr, AND with test_mask, |
| * Shift Left,Right/OR/XOR with values RMW header and write value to waddr. |
| * |
| * @vha : Pointer to adapter structure |
| * @raddr : CRB address to read from |
| * @waddr : CRB address to write to |
| * @p_rmw_hdr : header with shift/or/xor values. |
| * |
| */ |
| static void |
| qla8044_rmw_crb_reg(struct scsi_qla_host *vha, |
| uint32_t raddr, uint32_t waddr, struct qla8044_rmw *p_rmw_hdr) |
| { |
| uint32_t value; |
| |
| if (p_rmw_hdr->index_a) |
| value = vha->reset_tmplt.array[p_rmw_hdr->index_a]; |
| else |
| qla8044_rd_reg_indirect(vha, raddr, &value); |
| value &= p_rmw_hdr->test_mask; |
| value <<= p_rmw_hdr->shl; |
| value >>= p_rmw_hdr->shr; |
| value |= p_rmw_hdr->or_value; |
| value ^= p_rmw_hdr->xor_value; |
| qla8044_wr_reg_indirect(vha, waddr, value); |
| return; |
| } |
| |
| static inline void |
| qla8044_set_qsnt_ready(struct scsi_qla_host *vha) |
| { |
| uint32_t qsnt_state; |
| struct qla_hw_data *ha = vha->hw; |
| |
| qsnt_state = qla8044_rd_direct(vha, QLA8044_CRB_DRV_STATE_INDEX); |
| qsnt_state |= (1 << ha->portnum); |
| qla8044_wr_direct(vha, QLA8044_CRB_DRV_STATE_INDEX, qsnt_state); |
| ql_log(ql_log_info, vha, 0xb08e, "%s(%ld): qsnt_state: 0x%08x\n", |
| __func__, vha->host_no, qsnt_state); |
| } |
| |
| void |
| qla8044_clear_qsnt_ready(struct scsi_qla_host *vha) |
| { |
| uint32_t qsnt_state; |
| struct qla_hw_data *ha = vha->hw; |
| |
| qsnt_state = qla8044_rd_direct(vha, QLA8044_CRB_DRV_STATE_INDEX); |
| qsnt_state &= ~(1 << ha->portnum); |
| qla8044_wr_direct(vha, QLA8044_CRB_DRV_STATE_INDEX, qsnt_state); |
| ql_log(ql_log_info, vha, 0xb08f, "%s(%ld): qsnt_state: 0x%08x\n", |
| __func__, vha->host_no, qsnt_state); |
| } |
| |
| /** |
| * |
| * qla8044_lock_recovery - Recovers the idc_lock. |
| * @ha : Pointer to adapter structure |
| * |
| * Lock Recovery Register |
| * 5-2 Lock recovery owner: Function ID of driver doing lock recovery, |
| * valid if bits 1..0 are set by driver doing lock recovery. |
| * 1-0 1 - Driver intends to force unlock the IDC lock. |
| * 2 - Driver is moving forward to unlock the IDC lock. Driver clears |
| * this field after force unlocking the IDC lock. |
| * |
| * Lock Recovery process |
| * a. Read the IDC_LOCK_RECOVERY register. If the value in bits 1..0 is |
| * greater than 0, then wait for the other driver to unlock otherwise |
| * move to the next step. |
| * b. Indicate intent to force-unlock by writing 1h to the IDC_LOCK_RECOVERY |
| * register bits 1..0 and also set the function# in bits 5..2. |
| * c. Read the IDC_LOCK_RECOVERY register again after a delay of 200ms. |
| * Wait for the other driver to perform lock recovery if the function |
| * number in bits 5..2 has changed, otherwise move to the next step. |
| * d. Write a value of 2h to the IDC_LOCK_RECOVERY register bits 1..0 |
| * leaving your function# in bits 5..2. |
| * e. Force unlock using the DRIVER_UNLOCK register and immediately clear |
| * the IDC_LOCK_RECOVERY bits 5..0 by writing 0. |
| **/ |
| static int |
| qla8044_lock_recovery(struct scsi_qla_host *vha) |
| { |
| uint32_t lock = 0, lockid; |
| struct qla_hw_data *ha = vha->hw; |
| |
| lockid = qla8044_rd_reg(ha, QLA8044_DRV_LOCKRECOVERY); |
| |
| /* Check for other Recovery in progress, go wait */ |
| if ((lockid & IDC_LOCK_RECOVERY_STATE_MASK) != 0) |
| return QLA_FUNCTION_FAILED; |
| |
| /* Intent to Recover */ |
| qla8044_wr_reg(ha, QLA8044_DRV_LOCKRECOVERY, |
| (ha->portnum << |
| IDC_LOCK_RECOVERY_STATE_SHIFT_BITS) | INTENT_TO_RECOVER); |
| msleep(200); |
| |
| /* Check Intent to Recover is advertised */ |
| lockid = qla8044_rd_reg(ha, QLA8044_DRV_LOCKRECOVERY); |
| if ((lockid & IDC_LOCK_RECOVERY_OWNER_MASK) != (ha->portnum << |
| IDC_LOCK_RECOVERY_STATE_SHIFT_BITS)) |
| return QLA_FUNCTION_FAILED; |
| |
| ql_dbg(ql_dbg_p3p, vha, 0xb08B, "%s:%d: IDC Lock recovery initiated\n" |
| , __func__, ha->portnum); |
| |
| /* Proceed to Recover */ |
| qla8044_wr_reg(ha, QLA8044_DRV_LOCKRECOVERY, |
| (ha->portnum << IDC_LOCK_RECOVERY_STATE_SHIFT_BITS) | |
| PROCEED_TO_RECOVER); |
| |
| /* Force Unlock() */ |
| qla8044_wr_reg(ha, QLA8044_DRV_LOCK_ID, 0xFF); |
| qla8044_rd_reg(ha, QLA8044_DRV_UNLOCK); |
| |
| /* Clear bits 0-5 in IDC_RECOVERY register*/ |
| qla8044_wr_reg(ha, QLA8044_DRV_LOCKRECOVERY, 0); |
| |
| /* Get lock() */ |
| lock = qla8044_rd_reg(ha, QLA8044_DRV_LOCK); |
| if (lock) { |
| lockid = qla8044_rd_reg(ha, QLA8044_DRV_LOCK_ID); |
| lockid = ((lockid + (1 << 8)) & ~0xFF) | ha->portnum; |
| qla8044_wr_reg(ha, QLA8044_DRV_LOCK_ID, lockid); |
| return QLA_SUCCESS; |
| } else |
| return QLA_FUNCTION_FAILED; |
| } |
| |
| int |
| qla8044_idc_lock(struct qla_hw_data *ha) |
| { |
| uint32_t ret_val = QLA_SUCCESS, timeout = 0, status = 0; |
| uint32_t lock_id, lock_cnt, func_num, tmo_owner = 0, first_owner = 0; |
| scsi_qla_host_t *vha = pci_get_drvdata(ha->pdev); |
| |
| while (status == 0) { |
| /* acquire semaphore5 from PCI HW block */ |
| status = qla8044_rd_reg(ha, QLA8044_DRV_LOCK); |
| |
| if (status) { |
| /* Increment Counter (8-31) and update func_num (0-7) on |
| * getting a successful lock */ |
| lock_id = qla8044_rd_reg(ha, QLA8044_DRV_LOCK_ID); |
| lock_id = ((lock_id + (1 << 8)) & ~0xFF) | ha->portnum; |
| qla8044_wr_reg(ha, QLA8044_DRV_LOCK_ID, lock_id); |
| break; |
| } |
| |
| if (timeout == 0) |
| first_owner = qla8044_rd_reg(ha, QLA8044_DRV_LOCK_ID); |
| |
| if (++timeout >= |
| (QLA8044_DRV_LOCK_TIMEOUT / QLA8044_DRV_LOCK_MSLEEP)) { |
| tmo_owner = qla8044_rd_reg(ha, QLA8044_DRV_LOCK_ID); |
| func_num = tmo_owner & 0xFF; |
| lock_cnt = tmo_owner >> 8; |
| ql_log(ql_log_warn, vha, 0xb114, |
| "%s: Lock by func %d failed after 2s, lock held " |
| "by func %d, lock count %d, first_owner %d\n", |
| __func__, ha->portnum, func_num, lock_cnt, |
| (first_owner & 0xFF)); |
| if (first_owner != tmo_owner) { |
| /* Some other driver got lock, |
| * OR same driver got lock again (counter |
| * value changed), when we were waiting for |
| * lock. Retry for another 2 sec */ |
| ql_dbg(ql_dbg_p3p, vha, 0xb115, |
| "%s: %d: IDC lock failed\n", |
| __func__, ha->portnum); |
| timeout = 0; |
| } else { |
| /* Same driver holding lock > 2sec. |
| * Force Recovery */ |
| if (qla8044_lock_recovery(vha) == QLA_SUCCESS) { |
| /* Recovered and got lock */ |
| ret_val = QLA_SUCCESS; |
| ql_dbg(ql_dbg_p3p, vha, 0xb116, |
| "%s:IDC lock Recovery by %d" |
| "successful...\n", __func__, |
| ha->portnum); |
| } |
| /* Recovery Failed, some other function |
| * has the lock, wait for 2secs |
| * and retry |
| */ |
| ql_dbg(ql_dbg_p3p, vha, 0xb08a, |
| "%s: IDC lock Recovery by %d " |
| "failed, Retrying timeout\n", __func__, |
| ha->portnum); |
| timeout = 0; |
| } |
| } |
| msleep(QLA8044_DRV_LOCK_MSLEEP); |
| } |
| return ret_val; |
| } |
| |
| void |
| qla8044_idc_unlock(struct qla_hw_data *ha) |
| { |
| int id; |
| scsi_qla_host_t *vha = pci_get_drvdata(ha->pdev); |
| |
| id = qla8044_rd_reg(ha, QLA8044_DRV_LOCK_ID); |
| |
| if ((id & 0xFF) != ha->portnum) { |
| ql_log(ql_log_warn, vha, 0xb118, |
| "%s: IDC Unlock by %d failed, lock owner is %d!\n", |
| __func__, ha->portnum, (id & 0xFF)); |
| return; |
| } |
| |
| /* Keep lock counter value, update the ha->func_num to 0xFF */ |
| qla8044_wr_reg(ha, QLA8044_DRV_LOCK_ID, (id | 0xFF)); |
| qla8044_rd_reg(ha, QLA8044_DRV_UNLOCK); |
| } |
| |
| /* 8044 Flash Lock/Unlock functions */ |
| static int |
| qla8044_flash_lock(scsi_qla_host_t *vha) |
| { |
| int lock_owner; |
| int timeout = 0; |
| uint32_t lock_status = 0; |
| int ret_val = QLA_SUCCESS; |
| struct qla_hw_data *ha = vha->hw; |
| |
| while (lock_status == 0) { |
| lock_status = qla8044_rd_reg(ha, QLA8044_FLASH_LOCK); |
| if (lock_status) |
| break; |
| |
| if (++timeout >= QLA8044_FLASH_LOCK_TIMEOUT / 20) { |
| lock_owner = qla8044_rd_reg(ha, |
| QLA8044_FLASH_LOCK_ID); |
| ql_log(ql_log_warn, vha, 0xb113, |
| "%s: Simultaneous flash access by following ports, active port = %d: accessing port = %d", |
| __func__, ha->portnum, lock_owner); |
| ret_val = QLA_FUNCTION_FAILED; |
| break; |
| } |
| msleep(20); |
| } |
| qla8044_wr_reg(ha, QLA8044_FLASH_LOCK_ID, ha->portnum); |
| return ret_val; |
| } |
| |
| static void |
| qla8044_flash_unlock(scsi_qla_host_t *vha) |
| { |
| struct qla_hw_data *ha = vha->hw; |
| |
| /* Reading FLASH_UNLOCK register unlocks the Flash */ |
| qla8044_wr_reg(ha, QLA8044_FLASH_LOCK_ID, 0xFF); |
| qla8044_rd_reg(ha, QLA8044_FLASH_UNLOCK); |
| } |
| |
| |
| static |
| void qla8044_flash_lock_recovery(struct scsi_qla_host *vha) |
| { |
| |
| if (qla8044_flash_lock(vha)) { |
| /* Someone else is holding the lock. */ |
| ql_log(ql_log_warn, vha, 0xb120, "Resetting flash_lock\n"); |
| } |
| |
| /* |
| * Either we got the lock, or someone |
| * else died while holding it. |
| * In either case, unlock. |
| */ |
| qla8044_flash_unlock(vha); |
| } |
| |
| /* |
| * Address and length are byte address |
| */ |
| static int |
| qla8044_read_flash_data(scsi_qla_host_t *vha, uint8_t *p_data, |
| uint32_t flash_addr, int u32_word_count) |
| { |
| int i, ret_val = QLA_SUCCESS; |
| uint32_t u32_word; |
| |
| if (qla8044_flash_lock(vha) != QLA_SUCCESS) { |
| ret_val = QLA_FUNCTION_FAILED; |
| goto exit_lock_error; |
| } |
| |
| if (flash_addr & 0x03) { |
| ql_log(ql_log_warn, vha, 0xb117, |
| "%s: Illegal addr = 0x%x\n", __func__, flash_addr); |
| ret_val = QLA_FUNCTION_FAILED; |
| goto exit_flash_read; |
| } |
| |
| for (i = 0; i < u32_word_count; i++) { |
| if (qla8044_wr_reg_indirect(vha, QLA8044_FLASH_DIRECT_WINDOW, |
| (flash_addr & 0xFFFF0000))) { |
| ql_log(ql_log_warn, vha, 0xb119, |
| "%s: failed to write addr 0x%x to " |
| "FLASH_DIRECT_WINDOW\n! ", |
| __func__, flash_addr); |
| ret_val = QLA_FUNCTION_FAILED; |
| goto exit_flash_read; |
| } |
| |
| ret_val = qla8044_rd_reg_indirect(vha, |
| QLA8044_FLASH_DIRECT_DATA(flash_addr), |
| &u32_word); |
| if (ret_val != QLA_SUCCESS) { |
| ql_log(ql_log_warn, vha, 0xb08c, |
| "%s: failed to read addr 0x%x!\n", |
| __func__, flash_addr); |
| goto exit_flash_read; |
| } |
| |
| *(uint32_t *)p_data = u32_word; |
| p_data = p_data + 4; |
| flash_addr = flash_addr + 4; |
| } |
| |
| exit_flash_read: |
| qla8044_flash_unlock(vha); |
| |
| exit_lock_error: |
| return ret_val; |
| } |
| |
| /* |
| * Address and length are byte address |
| */ |
| uint8_t * |
| qla8044_read_optrom_data(struct scsi_qla_host *vha, uint8_t *buf, |
| uint32_t offset, uint32_t length) |
| { |
| scsi_block_requests(vha->host); |
| if (qla8044_read_flash_data(vha, (uint8_t *)buf, offset, length / 4) |
| != QLA_SUCCESS) { |
| ql_log(ql_log_warn, vha, 0xb08d, |
| "%s: Failed to read from flash\n", |
| __func__); |
| } |
| scsi_unblock_requests(vha->host); |
| return buf; |
| } |
| |
| static inline int |
| qla8044_need_reset(struct scsi_qla_host *vha) |
| { |
| uint32_t drv_state, drv_active; |
| int rval; |
| struct qla_hw_data *ha = vha->hw; |
| |
| drv_active = qla8044_rd_direct(vha, QLA8044_CRB_DRV_ACTIVE_INDEX); |
| drv_state = qla8044_rd_direct(vha, QLA8044_CRB_DRV_STATE_INDEX); |
| |
| rval = drv_state & (1 << ha->portnum); |
| |
| if (ha->flags.eeh_busy && drv_active) |
| rval = 1; |
| return rval; |
| } |
| |
| /* |
| * qla8044_write_list - Write the value (p_entry->arg2) to address specified |
| * by p_entry->arg1 for all entries in header with delay of p_hdr->delay between |
| * entries. |
| * |
| * @vha : Pointer to adapter structure |
| * @p_hdr : reset_entry header for WRITE_LIST opcode. |
| * |
| */ |
| static void |
| qla8044_write_list(struct scsi_qla_host *vha, |
| struct qla8044_reset_entry_hdr *p_hdr) |
| { |
| struct qla8044_entry *p_entry; |
| uint32_t i; |
| |
| p_entry = (struct qla8044_entry *)((char *)p_hdr + |
| sizeof(struct qla8044_reset_entry_hdr)); |
| |
| for (i = 0; i < p_hdr->count; i++, p_entry++) { |
| qla8044_wr_reg_indirect(vha, p_entry->arg1, p_entry->arg2); |
| if (p_hdr->delay) |
| udelay((uint32_t)(p_hdr->delay)); |
| } |
| } |
| |
| /* |
| * qla8044_read_write_list - Read from address specified by p_entry->arg1, |
| * write value read to address specified by p_entry->arg2, for all entries in |
| * header with delay of p_hdr->delay between entries. |
| * |
| * @vha : Pointer to adapter structure |
| * @p_hdr : reset_entry header for READ_WRITE_LIST opcode. |
| * |
| */ |
| static void |
| qla8044_read_write_list(struct scsi_qla_host *vha, |
| struct qla8044_reset_entry_hdr *p_hdr) |
| { |
| struct qla8044_entry *p_entry; |
| uint32_t i; |
| |
| p_entry = (struct qla8044_entry *)((char *)p_hdr + |
| sizeof(struct qla8044_reset_entry_hdr)); |
| |
| for (i = 0; i < p_hdr->count; i++, p_entry++) { |
| qla8044_read_write_crb_reg(vha, p_entry->arg1, |
| p_entry->arg2); |
| if (p_hdr->delay) |
| udelay((uint32_t)(p_hdr->delay)); |
| } |
| } |
| |
| /* |
| * qla8044_poll_reg - Poll the given CRB addr for duration msecs till |
| * value read ANDed with test_mask is equal to test_result. |
| * |
| * @ha : Pointer to adapter structure |
| * @addr : CRB register address |
| * @duration : Poll for total of "duration" msecs |
| * @test_mask : Mask value read with "test_mask" |
| * @test_result : Compare (value&test_mask) with test_result. |
| * |
| * Return Value - QLA_SUCCESS/QLA_FUNCTION_FAILED |
| */ |
| static int |
| qla8044_poll_reg(struct scsi_qla_host *vha, uint32_t addr, |
| int duration, uint32_t test_mask, uint32_t test_result) |
| { |
| uint32_t value; |
| int timeout_error; |
| uint8_t retries; |
| int ret_val = QLA_SUCCESS; |
| |
| ret_val = qla8044_rd_reg_indirect(vha, addr, &value); |
| if (ret_val == QLA_FUNCTION_FAILED) { |
| timeout_error = 1; |
| goto exit_poll_reg; |
| } |
| |
| /* poll every 1/10 of the total duration */ |
| retries = duration/10; |
| |
| do { |
| if ((value & test_mask) != test_result) { |
| timeout_error = 1; |
| msleep(duration/10); |
| ret_val = qla8044_rd_reg_indirect(vha, addr, &value); |
| if (ret_val == QLA_FUNCTION_FAILED) { |
| timeout_error = 1; |
| goto exit_poll_reg; |
| } |
| } else { |
| timeout_error = 0; |
| break; |
| } |
| } while (retries--); |
| |
| exit_poll_reg: |
| if (timeout_error) { |
| vha->reset_tmplt.seq_error++; |
| ql_log(ql_log_fatal, vha, 0xb090, |
| "%s: Poll Failed: 0x%08x 0x%08x 0x%08x\n", |
| __func__, value, test_mask, test_result); |
| } |
| |
| return timeout_error; |
| } |
| |
| /* |
| * qla8044_poll_list - For all entries in the POLL_LIST header, poll read CRB |
| * register specified by p_entry->arg1 and compare (value AND test_mask) with |
| * test_result to validate it. Wait for p_hdr->delay between processing entries. |
| * |
| * @ha : Pointer to adapter structure |
| * @p_hdr : reset_entry header for POLL_LIST opcode. |
| * |
| */ |
| static void |
| qla8044_poll_list(struct scsi_qla_host *vha, |
| struct qla8044_reset_entry_hdr *p_hdr) |
| { |
| long delay; |
| struct qla8044_entry *p_entry; |
| struct qla8044_poll *p_poll; |
| uint32_t i; |
| uint32_t value; |
| |
| p_poll = (struct qla8044_poll *) |
| ((char *)p_hdr + sizeof(struct qla8044_reset_entry_hdr)); |
| |
| /* Entries start after 8 byte qla8044_poll, poll header contains |
| * the test_mask, test_value. |
| */ |
| p_entry = (struct qla8044_entry *)((char *)p_poll + |
| sizeof(struct qla8044_poll)); |
| |
| delay = (long)p_hdr->delay; |
| |
| if (!delay) { |
| for (i = 0; i < p_hdr->count; i++, p_entry++) |
| qla8044_poll_reg(vha, p_entry->arg1, |
| delay, p_poll->test_mask, p_poll->test_value); |
| } else { |
| for (i = 0; i < p_hdr->count; i++, p_entry++) { |
| if (delay) { |
| if (qla8044_poll_reg(vha, |
| p_entry->arg1, delay, |
| p_poll->test_mask, |
| p_poll->test_value)) { |
| /*If |
| * (data_read&test_mask != test_value) |
| * read TIMEOUT_ADDR (arg1) and |
| * ADDR (arg2) registers |
| */ |
| qla8044_rd_reg_indirect(vha, |
| p_entry->arg1, &value); |
| qla8044_rd_reg_indirect(vha, |
| p_entry->arg2, &value); |
| } |
| } |
| } |
| } |
| } |
| |
| /* |
| * qla8044_poll_write_list - Write dr_value, ar_value to dr_addr/ar_addr, |
| * read ar_addr, if (value& test_mask != test_mask) re-read till timeout |
| * expires. |
| * |
| * @vha : Pointer to adapter structure |
| * @p_hdr : reset entry header for POLL_WRITE_LIST opcode. |
| * |
| */ |
| static void |
| qla8044_poll_write_list(struct scsi_qla_host *vha, |
| struct qla8044_reset_entry_hdr *p_hdr) |
| { |
| long delay; |
| struct qla8044_quad_entry *p_entry; |
| struct qla8044_poll *p_poll; |
| uint32_t i; |
| |
| p_poll = (struct qla8044_poll *)((char *)p_hdr + |
| sizeof(struct qla8044_reset_entry_hdr)); |
| |
| p_entry = (struct qla8044_quad_entry *)((char *)p_poll + |
| sizeof(struct qla8044_poll)); |
| |
| delay = (long)p_hdr->delay; |
| |
| for (i = 0; i < p_hdr->count; i++, p_entry++) { |
| qla8044_wr_reg_indirect(vha, |
| p_entry->dr_addr, p_entry->dr_value); |
| qla8044_wr_reg_indirect(vha, |
| p_entry->ar_addr, p_entry->ar_value); |
| if (delay) { |
| if (qla8044_poll_reg(vha, |
| p_entry->ar_addr, delay, |
| p_poll->test_mask, |
| p_poll->test_value)) { |
| ql_dbg(ql_dbg_p3p, vha, 0xb091, |
| "%s: Timeout Error: poll list, ", |
| __func__); |
| ql_dbg(ql_dbg_p3p, vha, 0xb092, |
| "item_num %d, entry_num %d\n", i, |
| vha->reset_tmplt.seq_index); |
| } |
| } |
| } |
| } |
| |
| /* |
| * qla8044_read_modify_write - Read value from p_entry->arg1, modify the |
| * value, write value to p_entry->arg2. Process entries with p_hdr->delay |
| * between entries. |
| * |
| * @vha : Pointer to adapter structure |
| * @p_hdr : header with shift/or/xor values. |
| * |
| */ |
| static void |
| qla8044_read_modify_write(struct scsi_qla_host *vha, |
| struct qla8044_reset_entry_hdr *p_hdr) |
| { |
| struct qla8044_entry *p_entry; |
| struct qla8044_rmw *p_rmw_hdr; |
| uint32_t i; |
| |
| p_rmw_hdr = (struct qla8044_rmw *)((char *)p_hdr + |
| sizeof(struct qla8044_reset_entry_hdr)); |
| |
| p_entry = (struct qla8044_entry *)((char *)p_rmw_hdr + |
| sizeof(struct qla8044_rmw)); |
| |
| for (i = 0; i < p_hdr->count; i++, p_entry++) { |
| qla8044_rmw_crb_reg(vha, p_entry->arg1, |
| p_entry->arg2, p_rmw_hdr); |
| if (p_hdr->delay) |
| udelay((uint32_t)(p_hdr->delay)); |
| } |
| } |
| |
| /* |
| * qla8044_pause - Wait for p_hdr->delay msecs, called between processing |
| * two entries of a sequence. |
| * |
| * @vha : Pointer to adapter structure |
| * @p_hdr : Common reset entry header. |
| * |
| */ |
| static |
| void qla8044_pause(struct scsi_qla_host *vha, |
| struct qla8044_reset_entry_hdr *p_hdr) |
| { |
| if (p_hdr->delay) |
| mdelay((uint32_t)((long)p_hdr->delay)); |
| } |
| |
| /* |
| * qla8044_template_end - Indicates end of reset sequence processing. |
| * |
| * @vha : Pointer to adapter structure |
| * @p_hdr : Common reset entry header. |
| * |
| */ |
| static void |
| qla8044_template_end(struct scsi_qla_host *vha, |
| struct qla8044_reset_entry_hdr *p_hdr) |
| { |
| vha->reset_tmplt.template_end = 1; |
| |
| if (vha->reset_tmplt.seq_error == 0) { |
| ql_dbg(ql_dbg_p3p, vha, 0xb093, |
| "%s: Reset sequence completed SUCCESSFULLY.\n", __func__); |
| } else { |
| ql_log(ql_log_fatal, vha, 0xb094, |
| "%s: Reset sequence completed with some timeout " |
| "errors.\n", __func__); |
| } |
| } |
| |
| /* |
| * qla8044_poll_read_list - Write ar_value to ar_addr register, read ar_addr, |
| * if (value & test_mask != test_value) re-read till timeout value expires, |
| * read dr_addr register and assign to reset_tmplt.array. |
| * |
| * @vha : Pointer to adapter structure |
| * @p_hdr : Common reset entry header. |
| * |
| */ |
| static void |
| qla8044_poll_read_list(struct scsi_qla_host *vha, |
| struct qla8044_reset_entry_hdr *p_hdr) |
| { |
| long delay; |
| int index; |
| struct qla8044_quad_entry *p_entry; |
| struct qla8044_poll *p_poll; |
| uint32_t i; |
| uint32_t value; |
| |
| p_poll = (struct qla8044_poll *) |
| ((char *)p_hdr + sizeof(struct qla8044_reset_entry_hdr)); |
| |
| p_entry = (struct qla8044_quad_entry *) |
| ((char *)p_poll + sizeof(struct qla8044_poll)); |
| |
| delay = (long)p_hdr->delay; |
| |
| for (i = 0; i < p_hdr->count; i++, p_entry++) { |
| qla8044_wr_reg_indirect(vha, p_entry->ar_addr, |
| p_entry->ar_value); |
| if (delay) { |
| if (qla8044_poll_reg(vha, p_entry->ar_addr, delay, |
| p_poll->test_mask, p_poll->test_value)) { |
| ql_dbg(ql_dbg_p3p, vha, 0xb095, |
| "%s: Timeout Error: poll " |
| "list, ", __func__); |
| ql_dbg(ql_dbg_p3p, vha, 0xb096, |
| "Item_num %d, " |
| "entry_num %d\n", i, |
| vha->reset_tmplt.seq_index); |
| } else { |
| index = vha->reset_tmplt.array_index; |
| qla8044_rd_reg_indirect(vha, |
| p_entry->dr_addr, &value); |
| vha->reset_tmplt.array[index++] = value; |
| if (index == QLA8044_MAX_RESET_SEQ_ENTRIES) |
| vha->reset_tmplt.array_index = 1; |
| } |
| } |
| } |
| } |
| |
| /* |
| * qla8031_process_reset_template - Process all entries in reset template |
| * till entry with SEQ_END opcode, which indicates end of the reset template |
| * processing. Each entry has a Reset Entry header, entry opcode/command, with |
| * size of the entry, number of entries in sub-sequence and delay in microsecs |
| * or timeout in millisecs. |
| * |
| * @ha : Pointer to adapter structure |
| * @p_buff : Common reset entry header. |
| * |
| */ |
| static void |
| qla8044_process_reset_template(struct scsi_qla_host *vha, |
| char *p_buff) |
| { |
| int index, entries; |
| struct qla8044_reset_entry_hdr *p_hdr; |
| char *p_entry = p_buff; |
| |
| vha->reset_tmplt.seq_end = 0; |
| vha->reset_tmplt.template_end = 0; |
| entries = vha->reset_tmplt.hdr->entries; |
| index = vha->reset_tmplt.seq_index; |
| |
| for (; (!vha->reset_tmplt.seq_end) && (index < entries); index++) { |
| p_hdr = (struct qla8044_reset_entry_hdr *)p_entry; |
| switch (p_hdr->cmd) { |
| case OPCODE_NOP: |
| break; |
| case OPCODE_WRITE_LIST: |
| qla8044_write_list(vha, p_hdr); |
| break; |
| case OPCODE_READ_WRITE_LIST: |
| qla8044_read_write_list(vha, p_hdr); |
| break; |
| case OPCODE_POLL_LIST: |
| qla8044_poll_list(vha, p_hdr); |
| break; |
| case OPCODE_POLL_WRITE_LIST: |
| qla8044_poll_write_list(vha, p_hdr); |
| break; |
| case OPCODE_READ_MODIFY_WRITE: |
| qla8044_read_modify_write(vha, p_hdr); |
| break; |
| case OPCODE_SEQ_PAUSE: |
| qla8044_pause(vha, p_hdr); |
| break; |
| case OPCODE_SEQ_END: |
| vha->reset_tmplt.seq_end = 1; |
| break; |
| case OPCODE_TMPL_END: |
| qla8044_template_end(vha, p_hdr); |
| break; |
| case OPCODE_POLL_READ_LIST: |
| qla8044_poll_read_list(vha, p_hdr); |
| break; |
| default: |
| ql_log(ql_log_fatal, vha, 0xb097, |
| "%s: Unknown command ==> 0x%04x on " |
| "entry = %d\n", __func__, p_hdr->cmd, index); |
| break; |
| } |
| /* |
| *Set pointer to next entry in the sequence. |
| */ |
| p_entry += p_hdr->size; |
| } |
| vha->reset_tmplt.seq_index = index; |
| } |
| |
| static void |
| qla8044_process_init_seq(struct scsi_qla_host *vha) |
| { |
| qla8044_process_reset_template(vha, |
| vha->reset_tmplt.init_offset); |
| if (vha->reset_tmplt.seq_end != 1) |
| ql_log(ql_log_fatal, vha, 0xb098, |
| "%s: Abrupt INIT Sub-Sequence end.\n", |
| __func__); |
| } |
| |
| static void |
| qla8044_process_stop_seq(struct scsi_qla_host *vha) |
| { |
| vha->reset_tmplt.seq_index = 0; |
| qla8044_process_reset_template(vha, vha->reset_tmplt.stop_offset); |
| if (vha->reset_tmplt.seq_end != 1) |
| ql_log(ql_log_fatal, vha, 0xb099, |
| "%s: Abrupt STOP Sub-Sequence end.\n", __func__); |
| } |
| |
| static void |
| qla8044_process_start_seq(struct scsi_qla_host *vha) |
| { |
| qla8044_process_reset_template(vha, vha->reset_tmplt.start_offset); |
| if (vha->reset_tmplt.template_end != 1) |
| ql_log(ql_log_fatal, vha, 0xb09a, |
| "%s: Abrupt START Sub-Sequence end.\n", |
| __func__); |
| } |
| |
| static int |
| qla8044_lockless_flash_read_u32(struct scsi_qla_host *vha, |
| uint32_t flash_addr, uint8_t *p_data, int u32_word_count) |
| { |
| uint32_t i; |
| uint32_t u32_word; |
| uint32_t flash_offset; |
| uint32_t addr = flash_addr; |
| int ret_val = QLA_SUCCESS; |
| |
| flash_offset = addr & (QLA8044_FLASH_SECTOR_SIZE - 1); |
| |
| if (addr & 0x3) { |
| ql_log(ql_log_fatal, vha, 0xb09b, "%s: Illegal addr = 0x%x\n", |
| __func__, addr); |
| ret_val = QLA_FUNCTION_FAILED; |
| goto exit_lockless_read; |
| } |
| |
| ret_val = qla8044_wr_reg_indirect(vha, |
| QLA8044_FLASH_DIRECT_WINDOW, (addr)); |
| |
| if (ret_val != QLA_SUCCESS) { |
| ql_log(ql_log_fatal, vha, 0xb09c, |
| "%s: failed to write addr 0x%x to FLASH_DIRECT_WINDOW!\n", |
| __func__, addr); |
| goto exit_lockless_read; |
| } |
| |
| /* Check if data is spread across multiple sectors */ |
| if ((flash_offset + (u32_word_count * sizeof(uint32_t))) > |
| (QLA8044_FLASH_SECTOR_SIZE - 1)) { |
| /* Multi sector read */ |
| for (i = 0; i < u32_word_count; i++) { |
| ret_val = qla8044_rd_reg_indirect(vha, |
| QLA8044_FLASH_DIRECT_DATA(addr), &u32_word); |
| if (ret_val != QLA_SUCCESS) { |
| ql_log(ql_log_fatal, vha, 0xb09d, |
| "%s: failed to read addr 0x%x!\n", |
| __func__, addr); |
| goto exit_lockless_read; |
| } |
| *(uint32_t *)p_data = u32_word; |
| p_data = p_data + 4; |
| addr = addr + 4; |
| flash_offset = flash_offset + 4; |
| if (flash_offset > (QLA8044_FLASH_SECTOR_SIZE - 1)) { |
| /* This write is needed once for each sector */ |
| ret_val = qla8044_wr_reg_indirect(vha, |
| QLA8044_FLASH_DIRECT_WINDOW, (addr)); |
| if (ret_val != QLA_SUCCESS) { |
| ql_log(ql_log_fatal, vha, 0xb09f, |
| "%s: failed to write addr " |
| "0x%x to FLASH_DIRECT_WINDOW!\n", |
| __func__, addr); |
| goto exit_lockless_read; |
| } |
| flash_offset = 0; |
| } |
| } |
| } else { |
| /* Single sector read */ |
| for (i = 0; i < u32_word_count; i++) { |
| ret_val = qla8044_rd_reg_indirect(vha, |
| QLA8044_FLASH_DIRECT_DATA(addr), &u32_word); |
| if (ret_val != QLA_SUCCESS) { |
| ql_log(ql_log_fatal, vha, 0xb0a0, |
| "%s: failed to read addr 0x%x!\n", |
| __func__, addr); |
| goto exit_lockless_read; |
| } |
| *(uint32_t *)p_data = u32_word; |
| p_data = p_data + 4; |
| addr = addr + 4; |
| } |
| } |
| |
| exit_lockless_read: |
| return ret_val; |
| } |
| |
| /* |
| * qla8044_ms_mem_write_128b - Writes data to MS/off-chip memory |
| * |
| * @vha : Pointer to adapter structure |
| * addr : Flash address to write to |
| * data : Data to be written |
| * count : word_count to be written |
| * |
| * Return Value - QLA_SUCCESS/QLA_FUNCTION_FAILED |
| */ |
| static int |
| qla8044_ms_mem_write_128b(struct scsi_qla_host *vha, |
| uint64_t addr, uint32_t *data, uint32_t count) |
| { |
| int i, j, ret_val = QLA_SUCCESS; |
| uint32_t agt_ctrl; |
| unsigned long flags; |
| struct qla_hw_data *ha = vha->hw; |
| |
| /* Only 128-bit aligned access */ |
| if (addr & 0xF) { |
| ret_val = QLA_FUNCTION_FAILED; |
| goto exit_ms_mem_write; |
| } |
| write_lock_irqsave(&ha->hw_lock, flags); |
| |
| /* Write address */ |
| ret_val = qla8044_wr_reg_indirect(vha, MD_MIU_TEST_AGT_ADDR_HI, 0); |
| if (ret_val == QLA_FUNCTION_FAILED) { |
| ql_log(ql_log_fatal, vha, 0xb0a1, |
| "%s: write to AGT_ADDR_HI failed!\n", __func__); |
| goto exit_ms_mem_write_unlock; |
| } |
| |
| for (i = 0; i < count; i++, addr += 16) { |
| if (!((addr_in_range(addr, QLA8044_ADDR_QDR_NET, |
| QLA8044_ADDR_QDR_NET_MAX)) || |
| (addr_in_range(addr, QLA8044_ADDR_DDR_NET, |
| QLA8044_ADDR_DDR_NET_MAX)))) { |
| ret_val = QLA_FUNCTION_FAILED; |
| goto exit_ms_mem_write_unlock; |
| } |
| |
| ret_val = qla8044_wr_reg_indirect(vha, |
| MD_MIU_TEST_AGT_ADDR_LO, addr); |
| |
| /* Write data */ |
| ret_val += qla8044_wr_reg_indirect(vha, |
| MD_MIU_TEST_AGT_WRDATA_LO, *data++); |
| ret_val += qla8044_wr_reg_indirect(vha, |
| MD_MIU_TEST_AGT_WRDATA_HI, *data++); |
| ret_val += qla8044_wr_reg_indirect(vha, |
| MD_MIU_TEST_AGT_WRDATA_ULO, *data++); |
| ret_val += qla8044_wr_reg_indirect(vha, |
| MD_MIU_TEST_AGT_WRDATA_UHI, *data++); |
| if (ret_val == QLA_FUNCTION_FAILED) { |
| ql_log(ql_log_fatal, vha, 0xb0a2, |
| "%s: write to AGT_WRDATA failed!\n", |
| __func__); |
| goto exit_ms_mem_write_unlock; |
| } |
| |
| /* Check write status */ |
| ret_val = qla8044_wr_reg_indirect(vha, MD_MIU_TEST_AGT_CTRL, |
| MIU_TA_CTL_WRITE_ENABLE); |
| ret_val += qla8044_wr_reg_indirect(vha, MD_MIU_TEST_AGT_CTRL, |
| MIU_TA_CTL_WRITE_START); |
| if (ret_val == QLA_FUNCTION_FAILED) { |
| ql_log(ql_log_fatal, vha, 0xb0a3, |
| "%s: write to AGT_CTRL failed!\n", __func__); |
| goto exit_ms_mem_write_unlock; |
| } |
| |
| for (j = 0; j < MAX_CTL_CHECK; j++) { |
| ret_val = qla8044_rd_reg_indirect(vha, |
| MD_MIU_TEST_AGT_CTRL, &agt_ctrl); |
| if (ret_val == QLA_FUNCTION_FAILED) { |
| ql_log(ql_log_fatal, vha, 0xb0a4, |
| "%s: failed to read " |
| "MD_MIU_TEST_AGT_CTRL!\n", __func__); |
| goto exit_ms_mem_write_unlock; |
| } |
| if ((agt_ctrl & MIU_TA_CTL_BUSY) == 0) |
| break; |
| } |
| |
| /* Status check failed */ |
| if (j >= MAX_CTL_CHECK) { |
| ql_log(ql_log_fatal, vha, 0xb0a5, |
| "%s: MS memory write failed!\n", |
| __func__); |
| ret_val = QLA_FUNCTION_FAILED; |
| goto exit_ms_mem_write_unlock; |
| } |
| } |
| |
| exit_ms_mem_write_unlock: |
| write_unlock_irqrestore(&ha->hw_lock, flags); |
| |
| exit_ms_mem_write: |
| return ret_val; |
| } |
| |
| static int |
| qla8044_copy_bootloader(struct scsi_qla_host *vha) |
| { |
| uint8_t *p_cache; |
| uint32_t src, count, size; |
| uint64_t dest; |
| int ret_val = QLA_SUCCESS; |
| struct qla_hw_data *ha = vha->hw; |
| |
| src = QLA8044_BOOTLOADER_FLASH_ADDR; |
| dest = qla8044_rd_reg(ha, QLA8044_BOOTLOADER_ADDR); |
| size = qla8044_rd_reg(ha, QLA8044_BOOTLOADER_SIZE); |
| |
| /* 128 bit alignment check */ |
| if (size & 0xF) |
| size = (size + 16) & ~0xF; |
| |
| /* 16 byte count */ |
| count = size/16; |
| |
| p_cache = vmalloc(size); |
| if (p_cache == NULL) { |
| ql_log(ql_log_fatal, vha, 0xb0a6, |
| "%s: Failed to allocate memory for " |
| "boot loader cache\n", __func__); |
| ret_val = QLA_FUNCTION_FAILED; |
| goto exit_copy_bootloader; |
| } |
| |
| ret_val = qla8044_lockless_flash_read_u32(vha, src, |
| p_cache, size/sizeof(uint32_t)); |
| if (ret_val == QLA_FUNCTION_FAILED) { |
| ql_log(ql_log_fatal, vha, 0xb0a7, |
| "%s: Error reading F/W from flash!!!\n", __func__); |
| goto exit_copy_error; |
| } |
| ql_dbg(ql_dbg_p3p, vha, 0xb0a8, "%s: Read F/W from flash!\n", |
| __func__); |
| |
| /* 128 bit/16 byte write to MS memory */ |
| ret_val = qla8044_ms_mem_write_128b(vha, dest, |
| (uint32_t *)p_cache, count); |
| if (ret_val == QLA_FUNCTION_FAILED) { |
| ql_log(ql_log_fatal, vha, 0xb0a9, |
| "%s: Error writing F/W to MS !!!\n", __func__); |
| goto exit_copy_error; |
| } |
| ql_dbg(ql_dbg_p3p, vha, 0xb0aa, |
| "%s: Wrote F/W (size %d) to MS !!!\n", |
| __func__, size); |
| |
| exit_copy_error: |
| vfree(p_cache); |
| |
| exit_copy_bootloader: |
| return ret_val; |
| } |
| |
| static int |
| qla8044_restart(struct scsi_qla_host *vha) |
| { |
| int ret_val = QLA_SUCCESS; |
| struct qla_hw_data *ha = vha->hw; |
| |
| qla8044_process_stop_seq(vha); |
| |
| /* Collect minidump */ |
| if (ql2xmdenable) |
| qla8044_get_minidump(vha); |
| else |
| ql_log(ql_log_fatal, vha, 0xb14c, |
| "Minidump disabled.\n"); |
| |
| qla8044_process_init_seq(vha); |
| |
| if (qla8044_copy_bootloader(vha)) { |
| ql_log(ql_log_fatal, vha, 0xb0ab, |
| "%s: Copy bootloader, firmware restart failed!\n", |
| __func__); |
| ret_val = QLA_FUNCTION_FAILED; |
| goto exit_restart; |
| } |
| |
| /* |
| * Loads F/W from flash |
| */ |
| qla8044_wr_reg(ha, QLA8044_FW_IMAGE_VALID, QLA8044_BOOT_FROM_FLASH); |
| |
| qla8044_process_start_seq(vha); |
| |
| exit_restart: |
| return ret_val; |
| } |
| |
| /* |
| * qla8044_check_cmd_peg_status - Check peg status to see if Peg is |
| * initialized. |
| * |
| * @ha : Pointer to adapter structure |
| * |
| * Return Value - QLA_SUCCESS/QLA_FUNCTION_FAILED |
| */ |
| static int |
| qla8044_check_cmd_peg_status(struct scsi_qla_host *vha) |
| { |
| uint32_t val, ret_val = QLA_FUNCTION_FAILED; |
| int retries = CRB_CMDPEG_CHECK_RETRY_COUNT; |
| struct qla_hw_data *ha = vha->hw; |
| |
| do { |
| val = qla8044_rd_reg(ha, QLA8044_CMDPEG_STATE); |
| if (val == PHAN_INITIALIZE_COMPLETE) { |
| ql_dbg(ql_dbg_p3p, vha, 0xb0ac, |
| "%s: Command Peg initialization " |
| "complete! state=0x%x\n", __func__, val); |
| ret_val = QLA_SUCCESS; |
| break; |
| } |
| msleep(CRB_CMDPEG_CHECK_DELAY); |
| } while (--retries); |
| |
| return ret_val; |
| } |
| |
| static int |
| qla8044_start_firmware(struct scsi_qla_host *vha) |
| { |
| int ret_val = QLA_SUCCESS; |
| |
| if (qla8044_restart(vha)) { |
| ql_log(ql_log_fatal, vha, 0xb0ad, |
| "%s: Restart Error!!!, Need Reset!!!\n", |
| __func__); |
| ret_val = QLA_FUNCTION_FAILED; |
| goto exit_start_fw; |
| } else |
| ql_dbg(ql_dbg_p3p, vha, 0xb0af, |
| "%s: Restart done!\n", __func__); |
| |
| ret_val = qla8044_check_cmd_peg_status(vha); |
| if (ret_val) { |
| ql_log(ql_log_fatal, vha, 0xb0b0, |
| "%s: Peg not initialized!\n", __func__); |
| ret_val = QLA_FUNCTION_FAILED; |
| } |
| |
| exit_start_fw: |
| return ret_val; |
| } |
| |
| void |
| qla8044_clear_drv_active(struct qla_hw_data *ha) |
| { |
| uint32_t drv_active; |
| struct scsi_qla_host *vha = pci_get_drvdata(ha->pdev); |
| |
| drv_active = qla8044_rd_direct(vha, QLA8044_CRB_DRV_ACTIVE_INDEX); |
| drv_active &= ~(1 << (ha->portnum)); |
| |
| ql_log(ql_log_info, vha, 0xb0b1, |
| "%s(%ld): drv_active: 0x%08x\n", |
| __func__, vha->host_no, drv_active); |
| |
| qla8044_wr_direct(vha, QLA8044_CRB_DRV_ACTIVE_INDEX, drv_active); |
| } |
| |
| /* |
| * qla8044_device_bootstrap - Initialize device, set DEV_READY, start fw |
| * @ha: pointer to adapter structure |
| * |
| * Note: IDC lock must be held upon entry |
| **/ |
| static int |
| qla8044_device_bootstrap(struct scsi_qla_host *vha) |
| { |
| int rval = QLA_FUNCTION_FAILED; |
| int i; |
| uint32_t old_count = 0, count = 0; |
| int need_reset = 0; |
| uint32_t idc_ctrl; |
| struct qla_hw_data *ha = vha->hw; |
| |
| need_reset = qla8044_need_reset(vha); |
| |
| if (!need_reset) { |
| old_count = qla8044_rd_direct(vha, |
| QLA8044_PEG_ALIVE_COUNTER_INDEX); |
| |
| for (i = 0; i < 10; i++) { |
| msleep(200); |
| |
| count = qla8044_rd_direct(vha, |
| QLA8044_PEG_ALIVE_COUNTER_INDEX); |
| if (count != old_count) { |
| rval = QLA_SUCCESS; |
| goto dev_ready; |
| } |
| } |
| qla8044_flash_lock_recovery(vha); |
| } else { |
| /* We are trying to perform a recovery here. */ |
| if (ha->flags.isp82xx_fw_hung) |
| qla8044_flash_lock_recovery(vha); |
| } |
| |
| /* set to DEV_INITIALIZING */ |
| ql_log(ql_log_info, vha, 0xb0b2, |
| "%s: HW State: INITIALIZING\n", __func__); |
| qla8044_wr_direct(vha, QLA8044_CRB_DEV_STATE_INDEX, |
| QLA8XXX_DEV_INITIALIZING); |
| |
| qla8044_idc_unlock(ha); |
| rval = qla8044_start_firmware(vha); |
| qla8044_idc_lock(ha); |
| |
| if (rval != QLA_SUCCESS) { |
| ql_log(ql_log_info, vha, 0xb0b3, |
| "%s: HW State: FAILED\n", __func__); |
| qla8044_clear_drv_active(ha); |
| qla8044_wr_direct(vha, QLA8044_CRB_DEV_STATE_INDEX, |
| QLA8XXX_DEV_FAILED); |
| return rval; |
| } |
| |
| /* For ISP8044, If IDC_CTRL GRACEFUL_RESET_BIT1 is set , reset it after |
| * device goes to INIT state. */ |
| idc_ctrl = qla8044_rd_reg(ha, QLA8044_IDC_DRV_CTRL); |
| if (idc_ctrl & GRACEFUL_RESET_BIT1) { |
| qla8044_wr_reg(ha, QLA8044_IDC_DRV_CTRL, |
| (idc_ctrl & ~GRACEFUL_RESET_BIT1)); |
| ha->fw_dumped = 0; |
| } |
| |
| dev_ready: |
| ql_log(ql_log_info, vha, 0xb0b4, |
| "%s: HW State: READY\n", __func__); |
| qla8044_wr_direct(vha, QLA8044_CRB_DEV_STATE_INDEX, QLA8XXX_DEV_READY); |
| |
| return rval; |
| } |
| |
| /*-------------------------Reset Sequence Functions-----------------------*/ |
| static void |
| qla8044_dump_reset_seq_hdr(struct scsi_qla_host *vha) |
| { |
| u8 *phdr; |
| |
| if (!vha->reset_tmplt.buff) { |
| ql_log(ql_log_fatal, vha, 0xb0b5, |
| "%s: Error Invalid reset_seq_template\n", __func__); |
| return; |
| } |
| |
| phdr = vha->reset_tmplt.buff; |
| ql_dbg(ql_dbg_p3p, vha, 0xb0b6, |
| "Reset Template :\n\t0x%X 0x%X 0x%X 0x%X" |
| "0x%X 0x%X 0x%X 0x%X 0x%X 0x%X\n" |
| "\t0x%X 0x%X 0x%X 0x%X 0x%X 0x%X\n\n", |
| *phdr, *(phdr+1), *(phdr+2), *(phdr+3), *(phdr+4), |
| *(phdr+5), *(phdr+6), *(phdr+7), *(phdr + 8), |
| *(phdr+9), *(phdr+10), *(phdr+11), *(phdr+12), |
| *(phdr+13), *(phdr+14), *(phdr+15)); |
| } |
| |
| /* |
| * qla8044_reset_seq_checksum_test - Validate Reset Sequence template. |
| * |
| * @ha : Pointer to adapter structure |
| * |
| * Return Value - QLA_SUCCESS/QLA_FUNCTION_FAILED |
| */ |
| static int |
| qla8044_reset_seq_checksum_test(struct scsi_qla_host *vha) |
| { |
| uint32_t sum = 0; |
| uint16_t *buff = (uint16_t *)vha->reset_tmplt.buff; |
| int u16_count = vha->reset_tmplt.hdr->size / sizeof(uint16_t); |
| |
| while (u16_count-- > 0) |
| sum += *buff++; |
| |
| while (sum >> 16) |
| sum = (sum & 0xFFFF) + (sum >> 16); |
| |
| /* checksum of 0 indicates a valid template */ |
| if (~sum) { |
| return QLA_SUCCESS; |
| } else { |
| ql_log(ql_log_fatal, vha, 0xb0b7, |
| "%s: Reset seq checksum failed\n", __func__); |
| return QLA_FUNCTION_FAILED; |
| } |
| } |
| |
| /* |
| * qla8044_read_reset_template - Read Reset Template from Flash, validate |
| * the template and store offsets of stop/start/init offsets in ha->reset_tmplt. |
| * |
| * @ha : Pointer to adapter structure |
| */ |
| void |
| qla8044_read_reset_template(struct scsi_qla_host *vha) |
| { |
| uint8_t *p_buff; |
| uint32_t addr, tmplt_hdr_def_size, tmplt_hdr_size; |
| |
| vha->reset_tmplt.seq_error = 0; |
| vha->reset_tmplt.buff = vmalloc(QLA8044_RESTART_TEMPLATE_SIZE); |
| if (vha->reset_tmplt.buff == NULL) { |
| ql_log(ql_log_fatal, vha, 0xb0b8, |
| "%s: Failed to allocate reset template resources\n", |
| __func__); |
| goto exit_read_reset_template; |
| } |
| |
| p_buff = vha->reset_tmplt.buff; |
| addr = QLA8044_RESET_TEMPLATE_ADDR; |
| |
| tmplt_hdr_def_size = |
| sizeof(struct qla8044_reset_template_hdr) / sizeof(uint32_t); |
| |
| ql_dbg(ql_dbg_p3p, vha, 0xb0b9, |
| "%s: Read template hdr size %d from Flash\n", |
| __func__, tmplt_hdr_def_size); |
| |
| /* Copy template header from flash */ |
| if (qla8044_read_flash_data(vha, p_buff, addr, tmplt_hdr_def_size)) { |
| ql_log(ql_log_fatal, vha, 0xb0ba, |
| "%s: Failed to read reset template\n", __func__); |
| goto exit_read_template_error; |
| } |
| |
| vha->reset_tmplt.hdr = |
| (struct qla8044_reset_template_hdr *) vha->reset_tmplt.buff; |
| |
| /* Validate the template header size and signature */ |
| tmplt_hdr_size = vha->reset_tmplt.hdr->hdr_size/sizeof(uint32_t); |
| if ((tmplt_hdr_size != tmplt_hdr_def_size) || |
| (vha->reset_tmplt.hdr->signature != RESET_TMPLT_HDR_SIGNATURE)) { |
| ql_log(ql_log_fatal, vha, 0xb0bb, |
| "%s: Template Header size invalid %d " |
| "tmplt_hdr_def_size %d!!!\n", __func__, |
| tmplt_hdr_size, tmplt_hdr_def_size); |
| goto exit_read_template_error; |
| } |
| |
| addr = QLA8044_RESET_TEMPLATE_ADDR + vha->reset_tmplt.hdr->hdr_size; |
| p_buff = vha->reset_tmplt.buff + vha->reset_tmplt.hdr->hdr_size; |
| tmplt_hdr_def_size = (vha->reset_tmplt.hdr->size - |
| vha->reset_tmplt.hdr->hdr_size)/sizeof(uint32_t); |
| |
| ql_dbg(ql_dbg_p3p, vha, 0xb0bc, |
| "%s: Read rest of the template size %d\n", |
| __func__, vha->reset_tmplt.hdr->size); |
| |
| /* Copy rest of the template */ |
| if (qla8044_read_flash_data(vha, p_buff, addr, tmplt_hdr_def_size)) { |
| ql_log(ql_log_fatal, vha, 0xb0bd, |
| "%s: Failed to read reset template\n", __func__); |
| goto exit_read_template_error; |
| } |
| |
| /* Integrity check */ |
| if (qla8044_reset_seq_checksum_test(vha)) { |
| ql_log(ql_log_fatal, vha, 0xb0be, |
| "%s: Reset Seq checksum failed!\n", __func__); |
| goto exit_read_template_error; |
| } |
| |
| ql_dbg(ql_dbg_p3p, vha, 0xb0bf, |
| "%s: Reset Seq checksum passed! Get stop, " |
| "start and init seq offsets\n", __func__); |
| |
| /* Get STOP, START, INIT sequence offsets */ |
| vha->reset_tmplt.init_offset = vha->reset_tmplt.buff + |
| vha->reset_tmplt.hdr->init_seq_offset; |
| |
| vha->reset_tmplt.start_offset = vha->reset_tmplt.buff + |
| vha->reset_tmplt.hdr->start_seq_offset; |
| |
| vha->reset_tmplt.stop_offset = vha->reset_tmplt.buff + |
| vha->reset_tmplt.hdr->hdr_size; |
| |
| qla8044_dump_reset_seq_hdr(vha); |
| |
| goto exit_read_reset_template; |
| |
| exit_read_template_error: |
| vfree(vha->reset_tmplt.buff); |
| |
| exit_read_reset_template: |
| return; |
| } |
| |
| void |
| qla8044_set_idc_dontreset(struct scsi_qla_host *vha) |
| { |
| uint32_t idc_ctrl; |
| struct qla_hw_data *ha = vha->hw; |
| |
| idc_ctrl = qla8044_rd_reg(ha, QLA8044_IDC_DRV_CTRL); |
| idc_ctrl |= DONTRESET_BIT0; |
| ql_dbg(ql_dbg_p3p, vha, 0xb0c0, |
| "%s: idc_ctrl = %d\n", __func__, idc_ctrl); |
| qla8044_wr_reg(ha, QLA8044_IDC_DRV_CTRL, idc_ctrl); |
| } |
| |
| static inline void |
| qla8044_set_rst_ready(struct scsi_qla_host *vha) |
| { |
| uint32_t drv_state; |
| struct qla_hw_data *ha = vha->hw; |
| |
| drv_state = qla8044_rd_direct(vha, QLA8044_CRB_DRV_STATE_INDEX); |
| |
| /* For ISP8044, drv_active register has 1 bit per function, |
| * shift 1 by func_num to set a bit for the function.*/ |
| drv_state |= (1 << ha->portnum); |
| |
| ql_log(ql_log_info, vha, 0xb0c1, |
| "%s(%ld): drv_state: 0x%08x\n", |
| __func__, vha->host_no, drv_state); |
| qla8044_wr_direct(vha, QLA8044_CRB_DRV_STATE_INDEX, drv_state); |
| } |
| |
| /** |
| * qla8044_need_reset_handler - Code to start reset sequence |
| * @ha: pointer to adapter structure |
| * |
| * Note: IDC lock must be held upon entry |
| **/ |
| static void |
| qla8044_need_reset_handler(struct scsi_qla_host *vha) |
| { |
| uint32_t dev_state = 0, drv_state, drv_active; |
| unsigned long reset_timeout; |
| struct qla_hw_data *ha = vha->hw; |
| |
| ql_log(ql_log_fatal, vha, 0xb0c2, |
| "%s: Performing ISP error recovery\n", __func__); |
| |
| if (vha->flags.online) { |
| qla8044_idc_unlock(ha); |
| qla2x00_abort_isp_cleanup(vha); |
| ha->isp_ops->get_flash_version(vha, vha->req->ring); |
| ha->isp_ops->nvram_config(vha); |
| qla8044_idc_lock(ha); |
| } |
| |
| dev_state = qla8044_rd_direct(vha, |
| QLA8044_CRB_DEV_STATE_INDEX); |
| drv_state = qla8044_rd_direct(vha, |
| QLA8044_CRB_DRV_STATE_INDEX); |
| drv_active = qla8044_rd_direct(vha, |
| QLA8044_CRB_DRV_ACTIVE_INDEX); |
| |
| ql_log(ql_log_info, vha, 0xb0c5, |
| "%s(%ld): drv_state = 0x%x, drv_active = 0x%x dev_state = 0x%x\n", |
| __func__, vha->host_no, drv_state, drv_active, dev_state); |
| |
| qla8044_set_rst_ready(vha); |
| |
| /* wait for 10 seconds for reset ack from all functions */ |
| reset_timeout = jiffies + (ha->fcoe_reset_timeout * HZ); |
| |
| do { |
| if (time_after_eq(jiffies, reset_timeout)) { |
| ql_log(ql_log_info, vha, 0xb0c4, |
| "%s: Function %d: Reset Ack Timeout!, drv_state: 0x%08x, drv_active: 0x%08x\n", |
| __func__, ha->portnum, drv_state, drv_active); |
| break; |
| } |
| |
| qla8044_idc_unlock(ha); |
| msleep(1000); |
| qla8044_idc_lock(ha); |
| |
| dev_state = qla8044_rd_direct(vha, |
| QLA8044_CRB_DEV_STATE_INDEX); |
| drv_state = qla8044_rd_direct(vha, |
| QLA8044_CRB_DRV_STATE_INDEX); |
| drv_active = qla8044_rd_direct(vha, |
| QLA8044_CRB_DRV_ACTIVE_INDEX); |
| } while (((drv_state & drv_active) != drv_active) && |
| (dev_state == QLA8XXX_DEV_NEED_RESET)); |
| |
| /* Remove IDC participation of functions not acknowledging */ |
| if (drv_state != drv_active) { |
| ql_log(ql_log_info, vha, 0xb0c7, |
| "%s(%ld): Function %d turning off drv_active of non-acking function 0x%x\n", |
| __func__, vha->host_no, ha->portnum, |
| (drv_active ^ drv_state)); |
| drv_active = drv_active & drv_state; |
| qla8044_wr_direct(vha, QLA8044_CRB_DRV_ACTIVE_INDEX, |
| drv_active); |
| } else { |
| /* |
| * Reset owner should execute reset recovery, |
| * if all functions acknowledged |
| */ |
| if ((ha->flags.nic_core_reset_owner) && |
| (dev_state == QLA8XXX_DEV_NEED_RESET)) { |
| ha->flags.nic_core_reset_owner = 0; |
| qla8044_device_bootstrap(vha); |
| return; |
| } |
| } |
| |
| /* Exit if non active function */ |
| if (!(drv_active & (1 << ha->portnum))) { |
| ha->flags.nic_core_reset_owner = 0; |
| return; |
| } |
| |
| /* |
| * Execute Reset Recovery if Reset Owner or Function 7 |
| * is the only active function |
| */ |
| if (ha->flags.nic_core_reset_owner || |
| ((drv_state & drv_active) == QLA8044_FUN7_ACTIVE_INDEX)) { |
| ha->flags.nic_core_reset_owner = 0; |
| qla8044_device_bootstrap(vha); |
| } |
| } |
| |
| static void |
| qla8044_set_drv_active(struct scsi_qla_host *vha) |
| { |
| uint32_t drv_active; |
| struct qla_hw_data *ha = vha->hw; |
| |
| drv_active = qla8044_rd_direct(vha, QLA8044_CRB_DRV_ACTIVE_INDEX); |
| |
| /* For ISP8044, drv_active register has 1 bit per function, |
| * shift 1 by func_num to set a bit for the function.*/ |
| drv_active |= (1 << ha->portnum); |
| |
| ql_log(ql_log_info, vha, 0xb0c8, |
| "%s(%ld): drv_active: 0x%08x\n", |
| __func__, vha->host_no, drv_active); |
| qla8044_wr_direct(vha, QLA8044_CRB_DRV_ACTIVE_INDEX, drv_active); |
| } |
| |
| static int |
| qla8044_check_drv_active(struct scsi_qla_host *vha) |
| { |
| uint32_t drv_active; |
| struct qla_hw_data *ha = vha->hw; |
| |
| drv_active = qla8044_rd_direct(vha, QLA8044_CRB_DRV_ACTIVE_INDEX); |
| if (drv_active & (1 << ha->portnum)) |
| return QLA_SUCCESS; |
| else |
| return QLA_TEST_FAILED; |
| } |
| |
| static void |
| qla8044_clear_idc_dontreset(struct scsi_qla_host *vha) |
| { |
| uint32_t idc_ctrl; |
| struct qla_hw_data *ha = vha->hw; |
| |
| idc_ctrl = qla8044_rd_reg(ha, QLA8044_IDC_DRV_CTRL); |
| idc_ctrl &= ~DONTRESET_BIT0; |
| ql_log(ql_log_info, vha, 0xb0c9, |
| "%s: idc_ctrl = %d\n", __func__, |
| idc_ctrl); |
| qla8044_wr_reg(ha, QLA8044_IDC_DRV_CTRL, idc_ctrl); |
| } |
| |
| static int |
| qla8044_set_idc_ver(struct scsi_qla_host *vha) |
| { |
| int idc_ver; |
| uint32_t drv_active; |
| int rval = QLA_SUCCESS; |
| struct qla_hw_data *ha = vha->hw; |
| |
| drv_active = qla8044_rd_direct(vha, QLA8044_CRB_DRV_ACTIVE_INDEX); |
| if (drv_active == (1 << ha->portnum)) { |
| idc_ver = qla8044_rd_direct(vha, |
| QLA8044_CRB_DRV_IDC_VERSION_INDEX); |
| idc_ver &= (~0xFF); |
| idc_ver |= QLA8044_IDC_VER_MAJ_VALUE; |
| qla8044_wr_direct(vha, QLA8044_CRB_DRV_IDC_VERSION_INDEX, |
| idc_ver); |
| ql_log(ql_log_info, vha, 0xb0ca, |
| "%s: IDC version updated to %d\n", |
| __func__, idc_ver); |
| } else { |
| idc_ver = qla8044_rd_direct(vha, |
| QLA8044_CRB_DRV_IDC_VERSION_INDEX); |
| idc_ver &= 0xFF; |
| if (QLA8044_IDC_VER_MAJ_VALUE != idc_ver) { |
| ql_log(ql_log_info, vha, 0xb0cb, |
| "%s: qla4xxx driver IDC version %d " |
| "is not compatible with IDC version %d " |
| "of other drivers!\n", |
| __func__, QLA8044_IDC_VER_MAJ_VALUE, |
| idc_ver); |
| rval = QLA_FUNCTION_FAILED; |
| goto exit_set_idc_ver; |
| } |
| } |
| |
| /* Update IDC_MINOR_VERSION */ |
| idc_ver = qla8044_rd_reg(ha, QLA8044_CRB_IDC_VER_MINOR); |
| idc_ver &= ~(0x03 << (ha->portnum * 2)); |
| idc_ver |= (QLA8044_IDC_VER_MIN_VALUE << (ha->portnum * 2)); |
| qla8044_wr_reg(ha, QLA8044_CRB_IDC_VER_MINOR, idc_ver); |
| |
| exit_set_idc_ver: |
| return rval; |
| } |
| |
| static int |
| qla8044_update_idc_reg(struct scsi_qla_host *vha) |
| { |
| uint32_t drv_active; |
| int rval = QLA_SUCCESS; |
| struct qla_hw_data *ha = vha->hw; |
| |
| if (vha->flags.init_done) |
| goto exit_update_idc_reg; |
| |
| qla8044_idc_lock(ha); |
| qla8044_set_drv_active(vha); |
| |
| drv_active = qla8044_rd_direct(vha, |
| QLA8044_CRB_DRV_ACTIVE_INDEX); |
| |
| /* If we are the first driver to load and |
| * ql2xdontresethba is not set, clear IDC_CTRL BIT0. */ |
| if ((drv_active == (1 << ha->portnum)) && !ql2xdontresethba) |
| qla8044_clear_idc_dontreset(vha); |
| |
| rval = qla8044_set_idc_ver(vha); |
| if (rval == QLA_FUNCTION_FAILED) |
| qla8044_clear_drv_active(ha); |
| qla8044_idc_unlock(ha); |
| |
| exit_update_idc_reg: |
| return rval; |
| } |
| |
| /** |
| * qla8044_need_qsnt_handler - Code to start qsnt |
| * @ha: pointer to adapter structure |
| **/ |
| static void |
| qla8044_need_qsnt_handler(struct scsi_qla_host *vha) |
| { |
| unsigned long qsnt_timeout; |
| uint32_t drv_state, drv_active, dev_state; |
| struct qla_hw_data *ha = vha->hw; |
| |
| if (vha->flags.online) |
| qla2x00_quiesce_io(vha); |
| else |
| return; |
| |
| qla8044_set_qsnt_ready(vha); |
| |
| /* Wait for 30 secs for all functions to ack qsnt mode */ |
| qsnt_timeout = jiffies + (QSNT_ACK_TOV * HZ); |
| drv_state = qla8044_rd_direct(vha, QLA8044_CRB_DRV_STATE_INDEX); |
| drv_active = qla8044_rd_direct(vha, QLA8044_CRB_DRV_ACTIVE_INDEX); |
| |
| /* Shift drv_active by 1 to match drv_state. As quiescent ready bit |
| position is at bit 1 and drv active is at bit 0 */ |
| drv_active = drv_active << 1; |
| |
| while (drv_state != drv_active) { |
| if (time_after_eq(jiffies, qsnt_timeout)) { |
| /* Other functions did not ack, changing state to |
| * DEV_READY |
| */ |
| clear_bit(ISP_QUIESCE_NEEDED, &vha->dpc_flags); |
| qla8044_wr_direct(vha, QLA8044_CRB_DEV_STATE_INDEX, |
| QLA8XXX_DEV_READY); |
| qla8044_clear_qsnt_ready(vha); |
| ql_log(ql_log_info, vha, 0xb0cc, |
| "Timeout waiting for quiescent ack!!!\n"); |
| return; |
| } |
| qla8044_idc_unlock(ha); |
| msleep(1000); |
| qla8044_idc_lock(ha); |
| |
| drv_state = qla8044_rd_direct(vha, |
| QLA8044_CRB_DRV_STATE_INDEX); |
| drv_active = qla8044_rd_direct(vha, |
| QLA8044_CRB_DRV_ACTIVE_INDEX); |
| drv_active = drv_active << 1; |
| } |
| |
| /* All functions have Acked. Set quiescent state */ |
| dev_state = qla8044_rd_direct(vha, QLA8044_CRB_DEV_STATE_INDEX); |
| |
| if (dev_state == QLA8XXX_DEV_NEED_QUIESCENT) { |
| qla8044_wr_direct(vha, QLA8044_CRB_DEV_STATE_INDEX, |
| QLA8XXX_DEV_QUIESCENT); |
| ql_log(ql_log_info, vha, 0xb0cd, |
| "%s: HW State: QUIESCENT\n", __func__); |
| } |
| } |
| |
| /* |
| * qla8044_device_state_handler - Adapter state machine |
| * @ha: pointer to host adapter structure. |
| * |
| * Note: IDC lock must be UNLOCKED upon entry |
| **/ |
| int |
| qla8044_device_state_handler(struct scsi_qla_host *vha) |
| { |
| uint32_t dev_state; |
| int rval = QLA_SUCCESS; |
| unsigned long dev_init_timeout; |
| struct qla_hw_data *ha = vha->hw; |
| |
| rval = qla8044_update_idc_reg(vha); |
| if (rval == QLA_FUNCTION_FAILED) |
| goto exit_error; |
| |
| dev_state = qla8044_rd_direct(vha, QLA8044_CRB_DEV_STATE_INDEX); |
| ql_dbg(ql_dbg_p3p, vha, 0xb0ce, |
| "Device state is 0x%x = %s\n", |
| dev_state, dev_state < MAX_STATES ? |
| qdev_state(dev_state) : "Unknown"); |
| |
| /* wait for 30 seconds for device to go ready */ |
| dev_init_timeout = jiffies + (ha->fcoe_dev_init_timeout * HZ); |
| |
| qla8044_idc_lock(ha); |
| |
| while (1) { |
| if (time_after_eq(jiffies, dev_init_timeout)) { |
| if (qla8044_check_drv_active(vha) == QLA_SUCCESS) { |
| ql_log(ql_log_warn, vha, 0xb0cf, |
| "%s: Device Init Failed 0x%x = %s\n", |
| QLA2XXX_DRIVER_NAME, dev_state, |
| dev_state < MAX_STATES ? |
| qdev_state(dev_state) : "Unknown"); |
| qla8044_wr_direct(vha, |
| QLA8044_CRB_DEV_STATE_INDEX, |
| QLA8XXX_DEV_FAILED); |
| } |
| } |
| |
| dev_state = qla8044_rd_direct(vha, QLA8044_CRB_DEV_STATE_INDEX); |
| ql_log(ql_log_info, vha, 0xb0d0, |
| "Device state is 0x%x = %s\n", |
| dev_state, dev_state < MAX_STATES ? |
| qdev_state(dev_state) : "Unknown"); |
| |
| /* NOTE: Make sure idc unlocked upon exit of switch statement */ |
| switch (dev_state) { |
| case QLA8XXX_DEV_READY: |
| ha->flags.nic_core_reset_owner = 0; |
| goto exit; |
| case QLA8XXX_DEV_COLD: |
| rval = qla8044_device_bootstrap(vha); |
| break; |
| case QLA8XXX_DEV_INITIALIZING: |
| qla8044_idc_unlock(ha); |
| msleep(1000); |
| qla8044_idc_lock(ha); |
| break; |
| case QLA8XXX_DEV_NEED_RESET: |
| /* For ISP8044, if NEED_RESET is set by any driver, |
| * it should be honored, irrespective of IDC_CTRL |
| * DONTRESET_BIT0 */ |
| qla8044_need_reset_handler(vha); |
| break; |
| case QLA8XXX_DEV_NEED_QUIESCENT: |
| /* idc locked/unlocked in handler */ |
| qla8044_need_qsnt_handler(vha); |
| |
| /* Reset the init timeout after qsnt handler */ |
| dev_init_timeout = jiffies + |
| (ha->fcoe_reset_timeout * HZ); |
| break; |
| case QLA8XXX_DEV_QUIESCENT: |
| ql_log(ql_log_info, vha, 0xb0d1, |
| "HW State: QUIESCENT\n"); |
| |
| qla8044_idc_unlock(ha); |
| msleep(1000); |
| qla8044_idc_lock(ha); |
| |
| /* Reset the init timeout after qsnt handler */ |
| dev_init_timeout = jiffies + |
| (ha->fcoe_reset_timeout * HZ); |
| break; |
| case QLA8XXX_DEV_FAILED: |
| ha->flags.nic_core_reset_owner = 0; |
| qla8044_idc_unlock(ha); |
| qla8xxx_dev_failed_handler(vha); |
| rval = QLA_FUNCTION_FAILED; |
| qla8044_idc_lock(ha); |
| goto exit; |
| default: |
| qla8044_idc_unlock(ha); |
| qla8xxx_dev_failed_handler(vha); |
| rval = QLA_FUNCTION_FAILED; |
| qla8044_idc_lock(ha); |
| goto exit; |
| } |
| } |
| exit: |
| qla8044_idc_unlock(ha); |
| |
| exit_error: |
| return rval; |
| } |
| |
| /** |
| * qla4_8xxx_check_temp - Check the ISP82XX temperature. |
| * @ha: adapter block pointer. |
| * |
| * Note: The caller should not hold the idc lock. |
| **/ |
| static int |
| qla8044_check_temp(struct scsi_qla_host *vha) |
| { |
| uint32_t temp, temp_state, temp_val; |
| int status = QLA_SUCCESS; |
| |
| temp = qla8044_rd_direct(vha, QLA8044_CRB_TEMP_STATE_INDEX); |
| temp_state = qla82xx_get_temp_state(temp); |
| temp_val = qla82xx_get_temp_val(temp); |
| |
| if (temp_state == QLA82XX_TEMP_PANIC) { |
| ql_log(ql_log_warn, vha, 0xb0d2, |
| "Device temperature %d degrees C" |
| " exceeds maximum allowed. Hardware has been shut" |
| " down\n", temp_val); |
| status = QLA_FUNCTION_FAILED; |
| return status; |
| } else if (temp_state == QLA82XX_TEMP_WARN) { |
| ql_log(ql_log_warn, vha, 0xb0d3, |
| "Device temperature %d" |
| " degrees C exceeds operating range." |
| " Immediate action needed.\n", temp_val); |
| } |
| return 0; |
| } |
| |
| int qla8044_read_temperature(scsi_qla_host_t *vha) |
| { |
| uint32_t temp; |
| |
| temp = qla8044_rd_direct(vha, QLA8044_CRB_TEMP_STATE_INDEX); |
| return qla82xx_get_temp_val(temp); |
| } |
| |
| /** |
| * qla8044_check_fw_alive - Check firmware health |
| * @ha: Pointer to host adapter structure. |
| * |
| * Context: Interrupt |
| **/ |
| int |
| qla8044_check_fw_alive(struct scsi_qla_host *vha) |
| { |
| uint32_t fw_heartbeat_counter; |
| uint32_t halt_status1, halt_status2; |
| int status = QLA_SUCCESS; |
| |
| fw_heartbeat_counter = qla8044_rd_direct(vha, |
| QLA8044_PEG_ALIVE_COUNTER_INDEX); |
| |
| /* If PEG_ALIVE_COUNTER is 0xffffffff, AER/EEH is in progress, ignore */ |
| if (fw_heartbeat_counter == 0xffffffff) { |
| ql_dbg(ql_dbg_p3p, vha, 0xb0d4, |
| "scsi%ld: %s: Device in frozen " |
| "state, QLA82XX_PEG_ALIVE_COUNTER is 0xffffffff\n", |
| vha->host_no, __func__); |
| return status; |
| } |
| |
| if (vha->fw_heartbeat_counter == fw_heartbeat_counter) { |
| vha->seconds_since_last_heartbeat++; |
| /* FW not alive after 2 seconds */ |
| if (vha->seconds_since_last_heartbeat == 2) { |
| vha->seconds_since_last_heartbeat = 0; |
| halt_status1 = qla8044_rd_direct(vha, |
| QLA8044_PEG_HALT_STATUS1_INDEX); |
| halt_status2 = qla8044_rd_direct(vha, |
| QLA8044_PEG_HALT_STATUS2_INDEX); |
| |
| ql_log(ql_log_info, vha, 0xb0d5, |
| "scsi(%ld): %s, ISP8044 " |
| "Dumping hw/fw registers:\n" |
| " PEG_HALT_STATUS1: 0x%x, " |
| "PEG_HALT_STATUS2: 0x%x,\n", |
| vha->host_no, __func__, halt_status1, |
| halt_status2); |
| status = QLA_FUNCTION_FAILED; |
| } |
| } else |
| vha->seconds_since_last_heartbeat = 0; |
| |
| vha->fw_heartbeat_counter = fw_heartbeat_counter; |
| return status; |
| } |
| |
| void |
| qla8044_watchdog(struct scsi_qla_host *vha) |
| { |
| uint32_t dev_state, halt_status; |
| int halt_status_unrecoverable = 0; |
| struct qla_hw_data *ha = vha->hw; |
| |
| /* don't poll if reset is going on or FW hang in quiescent state */ |
| if (!(test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags) || |
| test_bit(FCOE_CTX_RESET_NEEDED, &vha->dpc_flags))) { |
| dev_state = qla8044_rd_direct(vha, QLA8044_CRB_DEV_STATE_INDEX); |
| |
| if (qla8044_check_fw_alive(vha)) { |
| ha->flags.isp82xx_fw_hung = 1; |
| ql_log(ql_log_warn, vha, 0xb10a, |
| "Firmware hung.\n"); |
| qla82xx_clear_pending_mbx(vha); |
| } |
| |
| if (qla8044_check_temp(vha)) { |
| set_bit(ISP_UNRECOVERABLE, &vha->dpc_flags); |
| ha->flags.isp82xx_fw_hung = 1; |
| qla2xxx_wake_dpc(vha); |
| } else if (dev_state == QLA8XXX_DEV_NEED_RESET && |
| !test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags)) { |
| ql_log(ql_log_info, vha, 0xb0d6, |
| "%s: HW State: NEED RESET!\n", |
| __func__); |
| set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags); |
| qla2xxx_wake_dpc(vha); |
| } else if (dev_state == QLA8XXX_DEV_NEED_QUIESCENT && |
| !test_bit(ISP_QUIESCE_NEEDED, &vha->dpc_flags)) { |
| ql_log(ql_log_info, vha, 0xb0d7, |
| "%s: HW State: NEED QUIES detected!\n", |
| __func__); |
| set_bit(ISP_QUIESCE_NEEDED, &vha->dpc_flags); |
| qla2xxx_wake_dpc(vha); |
| } else { |
| /* Check firmware health */ |
| if (ha->flags.isp82xx_fw_hung) { |
| halt_status = qla8044_rd_direct(vha, |
| QLA8044_PEG_HALT_STATUS1_INDEX); |
| if (halt_status & |
| QLA8044_HALT_STATUS_FW_RESET) { |
| ql_log(ql_log_fatal, vha, |
| 0xb0d8, "%s: Firmware " |
| "error detected device " |
| "is being reset\n", |
| __func__); |
| } else if (halt_status & |
| QLA8044_HALT_STATUS_UNRECOVERABLE) { |
| halt_status_unrecoverable = 1; |
| } |
| |
| /* Since we cannot change dev_state in interrupt |
| * context, set appropriate DPC flag then wakeup |
| * DPC */ |
| if (halt_status_unrecoverable) { |
| set_bit(ISP_UNRECOVERABLE, |
| &vha->dpc_flags); |
| } else { |
| if (dev_state == |
| QLA8XXX_DEV_QUIESCENT) { |
| set_bit(FCOE_CTX_RESET_NEEDED, |
| &vha->dpc_flags); |
| ql_log(ql_log_info, vha, 0xb0d9, |
| "%s: FW CONTEXT Reset " |
| "needed!\n", __func__); |
| } else { |
| ql_log(ql_log_info, vha, |
| 0xb0da, "%s: " |
| "detect abort needed\n", |
| __func__); |
| set_bit(ISP_ABORT_NEEDED, |
| &vha->dpc_flags); |
| } |
| } |
| qla2xxx_wake_dpc(vha); |
| } |
| } |
| |
| } |
| } |
| |
| static int |
| qla8044_minidump_process_control(struct scsi_qla_host *vha, |
| struct qla8044_minidump_entry_hdr *entry_hdr) |
| { |
| struct qla8044_minidump_entry_crb *crb_entry; |
| uint32_t read_value, opcode, poll_time, addr, index; |
| uint32_t crb_addr, rval = QLA_SUCCESS; |
| unsigned long wtime; |
| struct qla8044_minidump_template_hdr *tmplt_hdr; |
| int i; |
| struct qla_hw_data *ha = vha->hw; |
| |
| ql_dbg(ql_dbg_p3p, vha, 0xb0dd, "Entering fn: %s\n", __func__); |
| tmplt_hdr = (struct qla8044_minidump_template_hdr *) |
| ha->md_tmplt_hdr; |
| crb_entry = (struct qla8044_minidump_entry_crb *)entry_hdr; |
| |
| crb_addr = crb_entry->addr; |
| for (i = 0; i < crb_entry->op_count; i++) { |
| opcode = crb_entry->crb_ctrl.opcode; |
| |
| if (opcode & QLA82XX_DBG_OPCODE_WR) { |
| qla8044_wr_reg_indirect(vha, crb_addr, |
| crb_entry->value_1); |
| opcode &= ~QLA82XX_DBG_OPCODE_WR; |
| } |
| |
| if (opcode & QLA82XX_DBG_OPCODE_RW) { |
| qla8044_rd_reg_indirect(vha, crb_addr, &read_value); |
| qla8044_wr_reg_indirect(vha, crb_addr, read_value); |
| opcode &= ~QLA82XX_DBG_OPCODE_RW; |
| } |
| |
| if (opcode & QLA82XX_DBG_OPCODE_AND) { |
| qla8044_rd_reg_indirect(vha, crb_addr, &read_value); |
| read_value &= crb_entry->value_2; |
| opcode &= ~QLA82XX_DBG_OPCODE_AND; |
| if (opcode & QLA82XX_DBG_OPCODE_OR) { |
| read_value |= crb_entry->value_3; |
| opcode &= ~QLA82XX_DBG_OPCODE_OR; |
| } |
| qla8044_wr_reg_indirect(vha, crb_addr, read_value); |
| } |
| if (opcode & QLA82XX_DBG_OPCODE_OR) { |
| qla8044_rd_reg_indirect(vha, crb_addr, &read_value); |
| read_value |= crb_entry->value_3; |
| qla8044_wr_reg_indirect(vha, crb_addr, read_value); |
| opcode &= ~QLA82XX_DBG_OPCODE_OR; |
| } |
| if (opcode & QLA82XX_DBG_OPCODE_POLL) { |
| poll_time = crb_entry->crb_strd.poll_timeout; |
| wtime = jiffies + poll_time; |
| qla8044_rd_reg_indirect(vha, crb_addr, &read_value); |
| |
| do { |
| if ((read_value & crb_entry->value_2) == |
| crb_entry->value_1) { |
| break; |
| } else if (time_after_eq(jiffies, wtime)) { |
| /* capturing dump failed */ |
| rval = QLA_FUNCTION_FAILED; |
| break; |
| } else { |
| qla8044_rd_reg_indirect(vha, |
| crb_addr, &read_value); |
| } |
| } while (1); |
| opcode &= ~QLA82XX_DBG_OPCODE_POLL; |
| } |
| |
| if (opcode & QLA82XX_DBG_OPCODE_RDSTATE) { |
| if (crb_entry->crb_strd.state_index_a) { |
| index = crb_entry->crb_strd.state_index_a; |
| addr = tmplt_hdr->saved_state_array[index]; |
| } else { |
| addr = crb_addr; |
| } |
| |
| qla8044_rd_reg_indirect(vha, addr, &read_value); |
| index = crb_entry->crb_ctrl.state_index_v; |
| tmplt_hdr->saved_state_array[index] = read_value; |
| opcode &= ~QLA82XX_DBG_OPCODE_RDSTATE; |
| } |
| |
| if (opcode & QLA82XX_DBG_OPCODE_WRSTATE) { |
| if (crb_entry->crb_strd.state_index_a) { |
| index = crb_entry->crb_strd.state_index_a; |
| addr = tmplt_hdr->saved_state_array[index]; |
| } else { |
| addr = crb_addr; |
| } |
| |
| if (crb_entry->crb_ctrl.state_index_v) { |
| index = crb_entry->crb_ctrl.state_index_v; |
| read_value = |
| tmplt_hdr->saved_state_array[index]; |
| } else { |
| read_value = crb_entry->value_1; |
| } |
| |
| qla8044_wr_reg_indirect(vha, addr, read_value); |
| opcode &= ~QLA82XX_DBG_OPCODE_WRSTATE; |
| } |
| |
| if (opcode & QLA82XX_DBG_OPCODE_MDSTATE) { |
| index = crb_entry->crb_ctrl.state_index_v; |
| read_value = tmplt_hdr->saved_state_array[index]; |
| read_value <<= crb_entry->crb_ctrl.shl; |
| read_value >>= crb_entry->crb_ctrl.shr; |
| if (crb_entry->value_2) |
| read_value &= crb_entry->value_2; |
| read_value |= crb_entry->value_3; |
| read_value += crb_entry->value_1; |
| tmplt_hdr->saved_state_array[index] = read_value; |
| opcode &= ~QLA82XX_DBG_OPCODE_MDSTATE; |
| } |
| crb_addr += crb_entry->crb_strd.addr_stride; |
| } |
| return rval; |
| } |
| |
| static void |
| qla8044_minidump_process_rdcrb(struct scsi_qla_host *vha, |
| struct qla8044_minidump_entry_hdr *entry_hdr, uint32_t **d_ptr) |
| { |
| uint32_t r_addr, r_stride, loop_cnt, i, r_value; |
| struct qla8044_minidump_entry_crb *crb_hdr; |
| uint32_t *data_ptr = *d_ptr; |
| |
| ql_dbg(ql_dbg_p3p, vha, 0xb0de, "Entering fn: %s\n", __func__); |
| crb_hdr = (struct qla8044_minidump_entry_crb *)entry_hdr; |
| r_addr = crb_hdr->addr; |
| r_stride = crb_hdr->crb_strd.addr_stride; |
| loop_cnt = crb_hdr->op_count; |
| |
| for (i = 0; i < loop_cnt; i++) { |
| qla8044_rd_reg_indirect(vha, r_addr, &r_value); |
| *data_ptr++ = r_addr; |
| *data_ptr++ = r_value; |
| r_addr += r_stride; |
| } |
| *d_ptr = data_ptr; |
| } |
| |
| static int |
| qla8044_minidump_process_rdmem(struct scsi_qla_host *vha, |
| struct qla8044_minidump_entry_hdr *entry_hdr, uint32_t **d_ptr) |
| { |
| uint32_t r_addr, r_value, r_data; |
| uint32_t i, j, loop_cnt; |
| struct qla8044_minidump_entry_rdmem *m_hdr; |
| unsigned long flags; |
| uint32_t *data_ptr = *d_ptr; |
| struct qla_hw_data *ha = vha->hw; |
| |
| ql_dbg(ql_dbg_p3p, vha, 0xb0df, "Entering fn: %s\n", __func__); |
| m_hdr = (struct qla8044_minidump_entry_rdmem *)entry_hdr; |
| r_addr = m_hdr->read_addr; |
| loop_cnt = m_hdr->read_data_size/16; |
| |
| ql_dbg(ql_dbg_p3p, vha, 0xb0f0, |
| "[%s]: Read addr: 0x%x, read_data_size: 0x%x\n", |
| __func__, r_addr, m_hdr->read_data_size); |
| |
| if (r_addr & 0xf) { |
| ql_dbg(ql_dbg_p3p, vha, 0xb0f1, |
| "[%s]: Read addr 0x%x not 16 bytes aligned\n", |
| __func__, r_addr); |
| return QLA_FUNCTION_FAILED; |
| } |
| |
| if (m_hdr->read_data_size % 16) { |
| ql_dbg(ql_dbg_p3p, vha, 0xb0f2, |
| "[%s]: Read data[0x%x] not multiple of 16 bytes\n", |
| __func__, m_hdr->read_data_size); |
| return QLA_FUNCTION_FAILED; |
| } |
| |
| ql_dbg(ql_dbg_p3p, vha, 0xb0f3, |
| "[%s]: rdmem_addr: 0x%x, read_data_size: 0x%x, loop_cnt: 0x%x\n", |
| __func__, r_addr, m_hdr->read_data_size, loop_cnt); |
| |
| write_lock_irqsave(&ha->hw_lock, flags); |
| for (i = 0; i < loop_cnt; i++) { |
| qla8044_wr_reg_indirect(vha, MD_MIU_TEST_AGT_ADDR_LO, r_addr); |
| r_value = 0; |
| qla8044_wr_reg_indirect(vha, MD_MIU_TEST_AGT_ADDR_HI, r_value); |
| r_value = MIU_TA_CTL_ENABLE; |
| qla8044_wr_reg_indirect(vha, MD_MIU_TEST_AGT_CTRL, r_value); |
| r_value = MIU_TA_CTL_START_ENABLE; |
| qla8044_wr_reg_indirect(vha, MD_MIU_TEST_AGT_CTRL, r_value); |
| |
| for (j = 0; j < MAX_CTL_CHECK; j++) { |
| qla8044_rd_reg_indirect(vha, MD_MIU_TEST_AGT_CTRL, |
| &r_value); |
| if ((r_value & MIU_TA_CTL_BUSY) == 0) |
| break; |
| } |
| |
| if (j >= MAX_CTL_CHECK) { |
| write_unlock_irqrestore(&ha->hw_lock, flags); |
| return QLA_SUCCESS; |
| } |
| |
| for (j = 0; j < 4; j++) { |
| qla8044_rd_reg_indirect(vha, MD_MIU_TEST_AGT_RDDATA[j], |
| &r_data); |
| *data_ptr++ = r_data; |
| } |
| |
| r_addr += 16; |
| } |
| write_unlock_irqrestore(&ha->hw_lock, flags); |
| |
| ql_dbg(ql_dbg_p3p, vha, 0xb0f4, |
| "Leaving fn: %s datacount: 0x%x\n", |
| __func__, (loop_cnt * 16)); |
| |
| *d_ptr = data_ptr; |
| return QLA_SUCCESS; |
| } |
| |
| /* ISP83xx flash read for _RDROM _BOARD */ |
| static uint32_t |
| qla8044_minidump_process_rdrom(struct scsi_qla_host *vha, |
| struct qla8044_minidump_entry_hdr *entry_hdr, uint32_t **d_ptr) |
| { |
| uint32_t fl_addr, u32_count, rval; |
| struct qla8044_minidump_entry_rdrom *rom_hdr; |
| uint32_t *data_ptr = *d_ptr; |
| |
| rom_hdr = (struct qla8044_minidump_entry_rdrom *)entry_hdr; |
| fl_addr = rom_hdr->read_addr; |
| u32_count = (rom_hdr->read_data_size)/sizeof(uint32_t); |
| |
| ql_dbg(ql_dbg_p3p, vha, 0xb0f5, "[%s]: fl_addr: 0x%x, count: 0x%x\n", |
| __func__, fl_addr, u32_count); |
| |
| rval = qla8044_lockless_flash_read_u32(vha, fl_addr, |
| (u8 *)(data_ptr), u32_count); |
| |
| if (rval != QLA_SUCCESS) { |
| ql_log(ql_log_fatal, vha, 0xb0f6, |
| "%s: Flash Read Error,Count=%d\n", __func__, u32_count); |
| return QLA_FUNCTION_FAILED; |
| } else { |
| data_ptr += u32_count; |
| *d_ptr = data_ptr; |
| return QLA_SUCCESS; |
| } |
| } |
| |
| static void |
| qla8044_mark_entry_skipped(struct scsi_qla_host *vha, |
| struct qla8044_minidump_entry_hdr *entry_hdr, int index) |
| { |
| entry_hdr->d_ctrl.driver_flags |= QLA82XX_DBG_SKIPPED_FLAG; |
| |
| ql_log(ql_log_info, vha, 0xb0f7, |
| "scsi(%ld): Skipping entry[%d]: ETYPE[0x%x]-ELEVEL[0x%x]\n", |
| vha->host_no, index, entry_hdr->entry_type, |
| entry_hdr->d_ctrl.entry_capture_mask); |
| } |
| |
| static int |
| qla8044_minidump_process_l2tag(struct scsi_qla_host *vha, |
| struct qla8044_minidump_entry_hdr *entry_hdr, |
| uint32_t **d_ptr) |
| { |
| uint32_t addr, r_addr, c_addr, t_r_addr; |
| uint32_t i, k, loop_count, t_value, r_cnt, r_value; |
| unsigned long p_wait, w_time, p_mask; |
| uint32_t c_value_w, c_value_r; |
| struct qla8044_minidump_entry_cache *cache_hdr; |
| int rval = QLA_FUNCTION_FAILED; |
| uint32_t *data_ptr = *d_ptr; |
| |
| ql_dbg(ql_dbg_p3p, vha, 0xb0f8, "Entering fn: %s\n", __func__); |
| cache_hdr = (struct qla8044_minidump_entry_cache *)entry_hdr; |
| |
| loop_count = cache_hdr->op_count; |
| r_addr = cache_hdr->read_addr; |
| c_addr = cache_hdr->control_addr; |
| c_value_w = cache_hdr->cache_ctrl.write_value; |
| |
| t_r_addr = cache_hdr->tag_reg_addr; |
| t_value = cache_hdr->addr_ctrl.init_tag_value; |
| r_cnt = cache_hdr->read_ctrl.read_addr_cnt; |
| p_wait = cache_hdr->cache_ctrl.poll_wait; |
| p_mask = cache_hdr->cache_ctrl.poll_mask; |
| |
| for (i = 0; i < loop_count; i++) { |
| qla8044_wr_reg_indirect(vha, t_r_addr, t_value); |
| if (c_value_w) |
| qla8044_wr_reg_indirect(vha, c_addr, c_value_w); |
| |
| if (p_mask) { |
| w_time = jiffies + p_wait; |
| do { |
| qla8044_rd_reg_indirect(vha, c_addr, |
| &c_value_r); |
| if ((c_value_r & p_mask) == 0) { |
| break; |
| } else if (time_after_eq(jiffies, w_time)) { |
| /* capturing dump failed */ |
| return rval; |
| } |
| } while (1); |
| } |
| |
| addr = r_addr; |
| for (k = 0; k < r_cnt; k++) { |
| qla8044_rd_reg_indirect(vha, addr, &r_value); |
| *data_ptr++ = r_value; |
| addr += cache_hdr->read_ctrl.read_addr_stride; |
| } |
| t_value += cache_hdr->addr_ctrl.tag_value_stride; |
| } |
| *d_ptr = data_ptr; |
| return QLA_SUCCESS; |
| } |
| |
| static void |
| qla8044_minidump_process_l1cache(struct scsi_qla_host *vha, |
| struct qla8044_minidump_entry_hdr *entry_hdr, uint32_t **d_ptr) |
| { |
| uint32_t addr, r_addr, c_addr, t_r_addr; |
| uint32_t i, k, loop_count, t_value, r_cnt, r_value; |
| uint32_t c_value_w; |
| struct qla8044_minidump_entry_cache *cache_hdr; |
| uint32_t *data_ptr = *d_ptr; |
| |
| cache_hdr = (struct qla8044_minidump_entry_cache *)entry_hdr; |
| loop_count = cache_hdr->op_count; |
| r_addr = cache_hdr->read_addr; |
| c_addr = cache_hdr->control_addr; |
| c_value_w = cache_hdr->cache_ctrl.write_value; |
| |
| t_r_addr = cache_hdr->tag_reg_addr; |
| t_value = cache_hdr->addr_ctrl.init_tag_value; |
| r_cnt = cache_hdr->read_ctrl.read_addr_cnt; |
| |
| for (i = 0; i < loop_count; i++) { |
| qla8044_wr_reg_indirect(vha, t_r_addr, t_value); |
| qla8044_wr_reg_indirect(vha, c_addr, c_value_w); |
| addr = r_addr; |
| for (k = 0; k < r_cnt; k++) { |
| qla8044_rd_reg_indirect(vha, addr, &r_value); |
| *data_ptr++ = r_value; |
| addr += cache_hdr->read_ctrl.read_addr_stride; |
| } |
| t_value += cache_hdr->addr_ctrl.tag_value_stride; |
| } |
| *d_ptr = data_ptr; |
| } |
| |
| static void |
| qla8044_minidump_process_rdocm(struct scsi_qla_host *vha, |
| struct qla8044_minidump_entry_hdr *entry_hdr, uint32_t **d_ptr) |
| { |
| uint32_t r_addr, r_stride, loop_cnt, i, r_value; |
| struct qla8044_minidump_entry_rdocm *ocm_hdr; |
| uint32_t *data_ptr = *d_ptr; |
| struct qla_hw_data *ha = vha->hw; |
| |
| ql_dbg(ql_dbg_p3p, vha, 0xb0f9, "Entering fn: %s\n", __func__); |
| |
| ocm_hdr = (struct qla8044_minidump_entry_rdocm *)entry_hdr; |
| r_addr = ocm_hdr->read_addr; |
| r_stride = ocm_hdr->read_addr_stride; |
| loop_cnt = ocm_hdr->op_count; |
| |
| ql_dbg(ql_dbg_p3p, vha, 0xb0fa, |
| "[%s]: r_addr: 0x%x, r_stride: 0x%x, loop_cnt: 0x%x\n", |
| __func__, r_addr, r_stride, loop_cnt); |
| |
| for (i = 0; i < loop_cnt; i++) { |
| r_value = readl((void __iomem *)(r_addr + ha->nx_pcibase)); |
| *data_ptr++ = r_value; |
| r_addr += r_stride; |
| } |
| ql_dbg(ql_dbg_p3p, vha, 0xb0fb, "Leaving fn: %s datacount: 0x%lx\n", |
| __func__, (long unsigned int) (loop_cnt * sizeof(uint32_t))); |
| |
| *d_ptr = data_ptr; |
| } |
| |
| static void |
| qla8044_minidump_process_rdmux(struct scsi_qla_host *vha, |
| struct qla8044_minidump_entry_hdr *entry_hdr, |
| uint32_t **d_ptr) |
| { |
| uint32_t r_addr, s_stride, s_addr, s_value, loop_cnt, i, r_value; |
| struct qla8044_minidump_entry_mux *mux_hdr; |
| uint32_t *data_ptr = *d_ptr; |
| |
| ql_dbg(ql_dbg_p3p, vha, 0xb0fc, "Entering fn: %s\n", __func__); |
| |
| mux_hdr = (struct qla8044_minidump_entry_mux *)entry_hdr; |
| r_addr = mux_hdr->read_addr; |
| s_addr = mux_hdr->select_addr; |
| s_stride = mux_hdr->select_value_stride; |
| s_value = mux_hdr->select_value; |
| loop_cnt = mux_hdr->op_count; |
| |
| for (i = 0; i < loop_cnt; i++) { |
| qla8044_wr_reg_indirect(vha, s_addr, s_value); |
| qla8044_rd_reg_indirect(vha, r_addr, &r_value); |
| *data_ptr++ = s_value; |
| *data_ptr++ = r_value; |
| s_value += s_stride; |
| } |
| *d_ptr = data_ptr; |
| } |
| |
| static void |
| qla8044_minidump_process_queue(struct scsi_qla_host *vha, |
| struct qla8044_minidump_entry_hdr *entry_hdr, |
| uint32_t **d_ptr) |
| { |
| uint32_t s_addr, r_addr; |
| uint32_t r_stride, r_value, r_cnt, qid = 0; |
| uint32_t i, k, loop_cnt; |
| struct qla8044_minidump_entry_queue *q_hdr; |
| uint32_t *data_ptr = *d_ptr; |
| |
| ql_dbg(ql_dbg_p3p, vha, 0xb0fd, "Entering fn: %s\n", __func__); |
| q_hdr = (struct qla8044_minidump_entry_queue *)entry_hdr; |
| s_addr = q_hdr->select_addr; |
| r_cnt = q_hdr->rd_strd.read_addr_cnt; |
| r_stride = q_hdr->rd_strd.read_addr_stride; |
| loop_cnt = q_hdr->op_count; |
| |
| for (i = 0; i < loop_cnt; i++) { |
| qla8044_wr_reg_indirect(vha, s_addr, qid); |
| r_addr = q_hdr->read_addr; |
| for (k = 0; k < r_cnt; k++) { |
| qla8044_rd_reg_indirect(vha, r_addr, &r_value); |
| *data_ptr++ = r_value; |
| r_addr += r_stride; |
| } |
| qid += q_hdr->q_strd.queue_id_stride; |
| } |
| *d_ptr = data_ptr; |
| } |
| |
| /* ISP83xx functions to process new minidump entries... */ |
| static uint32_t |
| qla8044_minidump_process_pollrd(struct scsi_qla_host *vha, |
| struct qla8044_minidump_entry_hdr *entry_hdr, |
| uint32_t **d_ptr) |
| { |
| uint32_t r_addr, s_addr, s_value, r_value, poll_wait, poll_mask; |
| uint16_t s_stride, i; |
| struct qla8044_minidump_entry_pollrd *pollrd_hdr; |
| uint32_t *data_ptr = *d_ptr; |
| |
| pollrd_hdr = (struct qla8044_minidump_entry_pollrd *) entry_hdr; |
| s_addr = pollrd_hdr->select_addr; |
| r_addr = pollrd_hdr->read_addr; |
| s_value = pollrd_hdr->select_value; |
| s_stride = pollrd_hdr->select_value_stride; |
| |
| poll_wait = pollrd_hdr->poll_wait; |
| poll_mask = pollrd_hdr->poll_mask; |
| |
| for (i = 0; i < pollrd_hdr->op_count; i++) { |
| qla8044_wr_reg_indirect(vha, s_addr, s_value); |
| poll_wait = pollrd_hdr->poll_wait; |
| while (1) { |
| qla8044_rd_reg_indirect(vha, s_addr, &r_value); |
| if ((r_value & poll_mask) != 0) { |
| break; |
| } else { |
| usleep_range(1000, 1100); |
| if (--poll_wait == 0) { |
| ql_log(ql_log_fatal, vha, 0xb0fe, |
| "%s: TIMEOUT\n", __func__); |
| goto error; |
| } |
| } |
| } |
| qla8044_rd_reg_indirect(vha, r_addr, &r_value); |
| *data_ptr++ = s_value; |
| *data_ptr++ = r_value; |
| |
| s_value += s_stride; |
| } |
| *d_ptr = data_ptr; |
| return QLA_SUCCESS; |
| |
| error: |
| return QLA_FUNCTION_FAILED; |
| } |
| |
| static void |
| qla8044_minidump_process_rdmux2(struct scsi_qla_host *vha, |
| struct qla8044_minidump_entry_hdr *entry_hdr, uint32_t **d_ptr) |
| { |
| uint32_t sel_val1, sel_val2, t_sel_val, data, i; |
| uint32_t sel_addr1, sel_addr2, sel_val_mask, read_addr; |
| struct qla8044_minidump_entry_rdmux2 *rdmux2_hdr; |
| uint32_t *data_ptr = *d_ptr; |
| |
| rdmux2_hdr = (struct qla8044_minidump_entry_rdmux2 *) entry_hdr; |
| sel_val1 = rdmux2_hdr->select_value_1; |
| sel_val2 = rdmux2_hdr->select_value_2; |
| sel_addr1 = rdmux2_hdr->select_addr_1; |
| sel_addr2 = rdmux2_hdr->select_addr_2; |
| sel_val_mask = rdmux2_hdr->select_value_mask; |
| read_addr = rdmux2_hdr->read_addr; |
| |
| for (i = 0; i < rdmux2_hdr->op_count; i++) { |
| qla8044_wr_reg_indirect(vha, sel_addr1, sel_val1); |
| t_sel_val = sel_val1 & sel_val_mask; |
| *data_ptr++ = t_sel_val; |
| |
| qla8044_wr_reg_indirect(vha, sel_addr2, t_sel_val); |
| qla8044_rd_reg_indirect(vha, read_addr, &data); |
| |
| *data_ptr++ = data; |
| |
| qla8044_wr_reg_indirect(vha, sel_addr1, sel_val2); |
| t_sel_val = sel_val2 & sel_val_mask; |
| *data_ptr++ = t_sel_val; |
| |
| qla8044_wr_reg_indirect(vha, sel_addr2, t_sel_val); |
| qla8044_rd_reg_indirect(vha, read_addr, &data); |
| |
| *data_ptr++ = data; |
| |
| sel_val1 += rdmux2_hdr->select_value_stride; |
| sel_val2 += rdmux2_hdr->select_value_stride; |
| } |
| |
| *d_ptr = data_ptr; |
| } |
| |
| static uint32_t |
| qla8044_minidump_process_pollrdmwr(struct scsi_qla_host *vha, |
| struct qla8044_minidump_entry_hdr *entry_hdr, |
| uint32_t **d_ptr) |
| { |
| uint32_t poll_wait, poll_mask, r_value, data; |
| uint32_t addr_1, addr_2, value_1, value_2; |
| struct qla8044_minidump_entry_pollrdmwr *poll_hdr; |
| uint32_t *data_ptr = *d_ptr; |
| |
| poll_hdr = (struct qla8044_minidump_entry_pollrdmwr *) entry_hdr; |
| addr_1 = poll_hdr->addr_1; |
| addr_2 = poll_hdr->addr_2; |
| value_1 = poll_hdr->value_1; |
| value_2 = poll_hdr->value_2; |
| poll_mask = poll_hdr->poll_mask; |
| |
| qla8044_wr_reg_indirect(vha, addr_1, value_1); |
| |
| poll_wait = poll_hdr->poll_wait; |
| while (1) { |
| qla8044_rd_reg_indirect(vha, addr_1, &r_value); |
| |
| if ((r_value & poll_mask) != 0) { |
| break; |
| } else { |
| usleep_range(1000, 1100); |
| if (--poll_wait == 0) { |
| ql_log(ql_log_fatal, vha, 0xb0ff, |
| "%s: TIMEOUT\n", __func__); |
| goto error; |
| } |
| } |
| } |
| |
| qla8044_rd_reg_indirect(vha, addr_2, &data); |
| data &= poll_hdr->modify_mask; |
| qla8044_wr_reg_indirect(vha, addr_2, data); |
| qla8044_wr_reg_indirect(vha, addr_1, value_2); |
| |
| poll_wait = poll_hdr->poll_wait; |
| while (1) { |
| qla8044_rd_reg_indirect(vha, addr_1, &r_value); |
| |
| if ((r_value & poll_mask) != 0) { |
| break; |
| } else { |
| usleep_range(1000, 1100); |
| if (--poll_wait == 0) { |
| ql_log(ql_log_fatal, vha, 0xb100, |
| "%s: TIMEOUT2\n", __func__); |
| goto error; |
| } |
| } |
| } |
| |
| *data_ptr++ = addr_2; |
| *data_ptr++ = data; |
| |
| *d_ptr = data_ptr; |
| |
| return QLA_SUCCESS; |
| |
| error: |
| return QLA_FUNCTION_FAILED; |
| } |
| |
| #define ISP8044_PEX_DMA_ENGINE_INDEX 8 |
| #define ISP8044_PEX_DMA_BASE_ADDRESS 0x77320000 |
| #define ISP8044_PEX_DMA_NUM_OFFSET 0x10000 |
| #define ISP8044_PEX_DMA_CMD_ADDR_LOW 0x0 |
| #define ISP8044_PEX_DMA_CMD_ADDR_HIGH 0x04 |
| #define ISP8044_PEX_DMA_CMD_STS_AND_CNTRL 0x08 |
| |
| #define ISP8044_PEX_DMA_READ_SIZE (16 * 1024) |
| #define ISP8044_PEX_DMA_MAX_WAIT (100 * 100) /* Max wait of 100 msecs */ |
| |
| static int |
| qla8044_check_dma_engine_state(struct scsi_qla_host *vha) |
| { |
| struct qla_hw_data *ha = vha->hw; |
| int rval = QLA_SUCCESS; |
| uint32_t dma_eng_num = 0, cmd_sts_and_cntrl = 0; |
| uint64_t dma_base_addr = 0; |
| struct qla8044_minidump_template_hdr *tmplt_hdr = NULL; |
| |
| tmplt_hdr = ha->md_tmplt_hdr; |
| dma_eng_num = |
| tmplt_hdr->saved_state_array[ISP8044_PEX_DMA_ENGINE_INDEX]; |
| dma_base_addr = ISP8044_PEX_DMA_BASE_ADDRESS + |
| (dma_eng_num * ISP8044_PEX_DMA_NUM_OFFSET); |
| |
| /* Read the pex-dma's command-status-and-control register. */ |
| rval = qla8044_rd_reg_indirect(vha, |
| (dma_base_addr + ISP8044_PEX_DMA_CMD_STS_AND_CNTRL), |
| &cmd_sts_and_cntrl); |
| if (rval) |
| return QLA_FUNCTION_FAILED; |
| |
| /* Check if requested pex-dma engine is available. */ |
| if (cmd_sts_and_cntrl & BIT_31) |
| return QLA_SUCCESS; |
| |
| return QLA_FUNCTION_FAILED; |
| } |
| |
| static int |
| qla8044_start_pex_dma(struct scsi_qla_host *vha, |
| struct qla8044_minidump_entry_rdmem_pex_dma *m_hdr) |
| { |
| struct qla_hw_data *ha = vha->hw; |
| int rval = QLA_SUCCESS, wait = 0; |
| uint32_t dma_eng_num = 0, cmd_sts_and_cntrl = 0; |
| uint64_t dma_base_addr = 0; |
| struct qla8044_minidump_template_hdr *tmplt_hdr = NULL; |
| |
| tmplt_hdr = ha->md_tmplt_hdr; |
| dma_eng_num = |
| tmplt_hdr->saved_state_array[ISP8044_PEX_DMA_ENGINE_INDEX]; |
| dma_base_addr = ISP8044_PEX_DMA_BASE_ADDRESS + |
| (dma_eng_num * ISP8044_PEX_DMA_NUM_OFFSET); |
| |
| rval = qla8044_wr_reg_indirect(vha, |
| dma_base_addr + ISP8044_PEX_DMA_CMD_ADDR_LOW, |
| m_hdr->desc_card_addr); |
| if (rval) |
| goto error_exit; |
| |
| rval = qla8044_wr_reg_indirect(vha, |
| dma_base_addr + ISP8044_PEX_DMA_CMD_ADDR_HIGH, 0); |
| if (rval) |
| goto error_exit; |
| |
| rval = qla8044_wr_reg_indirect(vha, |
| dma_base_addr + ISP8044_PEX_DMA_CMD_STS_AND_CNTRL, |
| m_hdr->start_dma_cmd); |
| if (rval) |
| goto error_exit; |
| |
| /* Wait for dma operation to complete. */ |
| for (wait = 0; wait < ISP8044_PEX_DMA_MAX_WAIT; wait++) { |
| rval = qla8044_rd_reg_indirect(vha, |
| (dma_base_addr + ISP8044_PEX_DMA_CMD_STS_AND_CNTRL), |
| &cmd_sts_and_cntrl); |
| if (rval) |
| goto error_exit; |
| |
| if ((cmd_sts_and_cntrl & BIT_1) == 0) |
| break; |
| |
| udelay(10); |
| } |
| |
| /* Wait a max of 100 ms, otherwise fallback to rdmem entry read */ |
| if (wait >= ISP8044_PEX_DMA_MAX_WAIT) { |
| rval = QLA_FUNCTION_FAILED; |
| goto error_exit; |
| } |
| |
| error_exit: |
| return rval; |
| } |
| |
| static int |
| qla8044_minidump_pex_dma_read(struct scsi_qla_host *vha, |
| struct qla8044_minidump_entry_hdr *entry_hdr, uint32_t **d_ptr) |
| { |
| struct qla_hw_data *ha = vha->hw; |
| int rval = QLA_SUCCESS; |
| struct qla8044_minidump_entry_rdmem_pex_dma *m_hdr = NULL; |
| uint32_t chunk_size, read_size; |
| uint8_t *data_ptr = (uint8_t *)*d_ptr; |
| void *rdmem_buffer = NULL; |
| dma_addr_t rdmem_dma; |
| struct qla8044_pex_dma_descriptor dma_desc; |
| |
| rval = qla8044_check_dma_engine_state(vha); |
| if (rval != QLA_SUCCESS) { |
| ql_dbg(ql_dbg_p3p, vha, 0xb147, |
| "DMA engine not available. Fallback to rdmem-read.\n"); |
| return QLA_FUNCTION_FAILED; |
| } |
| |
| m_hdr = (void *)entry_hdr; |
| |
| rdmem_buffer = dma_alloc_coherent(&ha->pdev->dev, |
| ISP8044_PEX_DMA_READ_SIZE, &rdmem_dma, GFP_KERNEL); |
| if (!rdmem_buffer) { |
| ql_dbg(ql_dbg_p3p, vha, 0xb148, |
| "Unable to allocate rdmem dma buffer\n"); |
| return QLA_FUNCTION_FAILED; |
| } |
| |
| /* Prepare pex-dma descriptor to be written to MS memory. */ |
| /* dma-desc-cmd layout: |
| * 0-3: dma-desc-cmd 0-3 |
| * 4-7: pcid function number |
| * 8-15: dma-desc-cmd 8-15 |
| * dma_bus_addr: dma buffer address |
| * cmd.read_data_size: amount of data-chunk to be read. |
| */ |
| dma_desc.cmd.dma_desc_cmd = (m_hdr->dma_desc_cmd & 0xff0f); |
| dma_desc.cmd.dma_desc_cmd |= |
| ((PCI_FUNC(ha->pdev->devfn) & 0xf) << 0x4); |
| |
| dma_desc.dma_bus_addr = rdmem_dma; |
| dma_desc.cmd.read_data_size = chunk_size = ISP8044_PEX_DMA_READ_SIZE; |
| read_size = 0; |
| |
| /* |
| * Perform rdmem operation using pex-dma. |
| * Prepare dma in chunks of ISP8044_PEX_DMA_READ_SIZE. |
| */ |
| while (read_size < m_hdr->read_data_size) { |
| if (m_hdr->read_data_size - read_size < |
| ISP8044_PEX_DMA_READ_SIZE) { |
| chunk_size = (m_hdr->read_data_size - read_size); |
| dma_desc.cmd.read_data_size = chunk_size; |
| } |
| |
| dma_desc.src_addr = m_hdr->read_addr + read_size; |
| |
| /* Prepare: Write pex-dma descriptor to MS memory. */ |
| rval = qla8044_ms_mem_write_128b(vha, |
| m_hdr->desc_card_addr, (void *)&dma_desc, |
| (sizeof(struct qla8044_pex_dma_descriptor)/16)); |
| if (rval) { |
| ql_log(ql_log_warn, vha, 0xb14a, |
| "%s: Error writing rdmem-dma-init to MS !!!\n", |
| __func__); |
| goto error_exit; |
| } |
| ql_dbg(ql_dbg_p3p, vha, 0xb14b, |
| "%s: Dma-descriptor: Instruct for rdmem dma " |
| "(chunk_size 0x%x).\n", __func__, chunk_size); |
| |
| /* Execute: Start pex-dma operation. */ |
| rval = qla8044_start_pex_dma(vha, m_hdr); |
| if (rval) |
| goto error_exit; |
| |
| memcpy(data_ptr, rdmem_buffer, chunk_size); |
| data_ptr += chunk_size; |
| read_size += chunk_size; |
| } |
| |
| *d_ptr = (void *)data_ptr; |
| |
| error_exit: |
| if (rdmem_buffer) |
| dma_free_coherent(&ha->pdev->dev, ISP8044_PEX_DMA_READ_SIZE, |
| rdmem_buffer, rdmem_dma); |
| |
| return rval; |
| } |
| |
| static uint32_t |
| qla8044_minidump_process_rddfe(struct scsi_qla_host *vha, |
| struct qla8044_minidump_entry_hdr *entry_hdr, uint32_t **d_ptr) |
| { |
| int loop_cnt; |
| uint32_t addr1, addr2, value, data, temp, wrVal; |
| uint8_t stride, stride2; |
| uint16_t count; |
| uint32_t poll, mask, modify_mask; |
| uint32_t wait_count = 0; |
| |
| uint32_t *data_ptr = *d_ptr; |
| |
| struct qla8044_minidump_entry_rddfe *rddfe; |
| rddfe = (struct qla8044_minidump_entry_rddfe *) entry_hdr; |
| |
| addr1 = rddfe->addr_1; |
| value = rddfe->value; |
| stride = rddfe->stride; |
| stride2 = rddfe->stride2; |
| count = rddfe->count; |
| |
| poll = rddfe->poll; |
| mask = rddfe->mask; |
| modify_mask = rddfe->modify_mask; |
| |
| addr2 = addr1 + stride; |
| |
| for (loop_cnt = 0x0; loop_cnt < count; loop_cnt++) { |
| qla8044_wr_reg_indirect(vha, addr1, (0x40000000 | value)); |
| |
| wait_count = 0; |
| while (wait_count < poll) { |
| qla8044_rd_reg_indirect(vha, addr1, &temp); |
| if ((temp & mask) != 0) |
| break; |
| wait_count++; |
| } |
| |
| if (wait_count == poll) { |
| ql_log(ql_log_warn, vha, 0xb153, |
| "%s: TIMEOUT\n", __func__); |
| goto error; |
| } else { |
| qla8044_rd_reg_indirect(vha, addr2, &temp); |
| temp = temp & modify_mask; |
| temp = (temp | ((loop_cnt << 16) | loop_cnt)); |
| wrVal = ((temp << 16) | temp); |
| |
| qla8044_wr_reg_indirect(vha, addr2, wrVal); |
| qla8044_wr_reg_indirect(vha, addr1, value); |
| |
| wait_count = 0; |
| while (wait_count < poll) { |
| qla8044_rd_reg_indirect(vha, addr1, &temp); |
| if ((temp & mask) != 0) |
| break; |
| wait_count++; |
| } |
| if (wait_count == poll) { |
| ql_log(ql_log_warn, vha, 0xb154, |
| "%s: TIMEOUT\n", __func__); |
| goto error; |
| } |
| |
| qla8044_wr_reg_indirect(vha, addr1, |
| ((0x40000000 | value) + stride2)); |
| wait_count = 0; |
| while (wait_count < poll) { |
| qla8044_rd_reg_indirect(vha, addr1, &temp); |
| if ((temp & mask) != 0) |
| break; |
| wait_count++; |
| } |
| |
| if (wait_count == poll) { |
| ql_log(ql_log_warn, vha, 0xb155, |
| "%s: TIMEOUT\n", __func__); |
| goto error; |
| } |
| |
| qla8044_rd_reg_indirect(vha, addr2, &data); |
| |
| *data_ptr++ = wrVal; |
| *data_ptr++ = data; |
| } |
| |
| } |
| |
| *d_ptr = data_ptr; |
| return QLA_SUCCESS; |
| |
| error: |
| return -1; |
| |
| } |
| |
| static uint32_t |
| qla8044_minidump_process_rdmdio(struct scsi_qla_host *vha, |
| struct qla8044_minidump_entry_hdr *entry_hdr, uint32_t **d_ptr) |
| { |
| int ret = 0; |
| uint32_t addr1, addr2, value1, value2, data, selVal; |
| uint8_t stride1, stride2; |
| uint32_t addr3, addr4, addr5, addr6, addr7; |
| uint16_t count, loop_cnt; |
| uint32_t mask; |
| uint32_t *data_ptr = *d_ptr; |
| |
| struct qla8044_minidump_entry_rdmdio *rdmdio; |
| |
| rdmdio = (struct qla8044_minidump_entry_rdmdio *) entry_hdr; |
| |
| addr1 = rdmdio->addr_1; |
| addr2 = rdmdio->addr_2; |
| value1 = rdmdio->value_1; |
| stride1 = rdmdio->stride_1; |
| stride2 = rdmdio->stride_2; |
| count = rdmdio->count; |
| |
| mask = rdmdio->mask; |
| value2 = rdmdio->value_2; |
| |
| addr3 = addr1 + stride1; |
| |
| for (loop_cnt = 0; loop_cnt < count; loop_cnt++) { |
| ret = qla8044_poll_wait_ipmdio_bus_idle(vha, addr1, addr2, |
| addr3, mask); |
| if (ret == -1) |
| goto error; |
| |
| addr4 = addr2 - stride1; |
| ret = qla8044_ipmdio_wr_reg(vha, addr1, addr3, mask, addr4, |
| value2); |
| if (ret == -1) |
| goto error; |
| |
| addr5 = addr2 - (2 * stride1); |
| ret = qla8044_ipmdio_wr_reg(vha, addr1, addr3, mask, addr5, |
| value1); |
| if (ret == -1) |
| goto error; |
| |
| addr6 = addr2 - (3 * stride1); |
| ret = qla8044_ipmdio_wr_reg(vha, addr1, addr3, mask, |
| addr6, 0x2); |
| if (ret == -1) |
| goto error; |
| |
| ret = qla8044_poll_wait_ipmdio_bus_idle(vha, addr1, addr2, |
| addr3, mask); |
| if (ret == -1) |
| goto error; |
| |
| addr7 = addr2 - (4 * stride1); |
| data = qla8044_ipmdio_rd_reg(vha, addr1, addr3, mask, addr7); |
| if (data == -1) |
| goto error; |
| |
| selVal = (value2 << 18) | (value1 << 2) | 2; |
| |
| stride2 = rdmdio->stride_2; |
| *data_ptr++ = selVal; |
| *data_ptr++ = data; |
| |
| value1 = value1 + stride2; |
| *d_ptr = data_ptr; |
| } |
| |
| return 0; |
| |
| error: |
| return -1; |
| } |
| |
| static uint32_t qla8044_minidump_process_pollwr(struct scsi_qla_host *vha, |
| struct qla8044_minidump_entry_hdr *entry_hdr, uint32_t **d_ptr) |
| { |
| uint32_t addr1, addr2, value1, value2, poll, r_value; |
| uint32_t wait_count = 0; |
| struct qla8044_minidump_entry_pollwr *pollwr_hdr; |
| |
| pollwr_hdr = (struct qla8044_minidump_entry_pollwr *)entry_hdr; |
| addr1 = pollwr_hdr->addr_1; |
| addr2 = pollwr_hdr->addr_2; |
| value1 = pollwr_hdr->value_1; |
| value2 = pollwr_hdr->value_2; |
| |
| poll = pollwr_hdr->poll; |
| |
| while (wait_count < poll) { |
| qla8044_rd_reg_indirect(vha, addr1, &r_value); |
| |
| if ((r_value & poll) != 0) |
| break; |
| wait_count++; |
| } |
| |
| if (wait_count == poll) { |
| ql_log(ql_log_warn, vha, 0xb156, "%s: TIMEOUT\n", __func__); |
| goto error; |
| } |
| |
| qla8044_wr_reg_indirect(vha, addr2, value2); |
| qla8044_wr_reg_indirect(vha, addr1, value1); |
| |
| wait_count = 0; |
| while (wait_count < poll) { |
| qla8044_rd_reg_indirect(vha, addr1, &r_value); |
| |
| if ((r_value & poll) != 0) |
| break; |
| wait_count++; |
| } |
| |
| return QLA_SUCCESS; |
| |
| error: |
| return -1; |
| } |
| |
| /* |
| * |
| * qla8044_collect_md_data - Retrieve firmware minidump data. |
| * @ha: pointer to adapter structure |
| **/ |
| int |
| qla8044_collect_md_data(struct scsi_qla_host *vha) |
| { |
| int num_entry_hdr = 0; |
| struct qla8044_minidump_entry_hdr *entry_hdr; |
| struct qla8044_minidump_template_hdr *tmplt_hdr; |
| uint32_t *data_ptr; |
| uint32_t data_collected = 0, f_capture_mask; |
| int i, rval = QLA_FUNCTION_FAILED; |
| uint64_t now; |
| uint32_t timestamp, idc_control; |
| struct qla_hw_data *ha = vha->hw; |
| |
| if (!ha->md_dump) { |
| ql_log(ql_log_info, vha, 0xb101, |
| "%s(%ld) No buffer to dump\n", |
| __func__, vha->host_no); |
| return rval; |
| } |
| |
| if (ha->fw_dumped) { |
| ql_log(ql_log_warn, vha, 0xb10d, |
| "Firmware has been previously dumped (%p) " |
| "-- ignoring request.\n", ha->fw_dump); |
| goto md_failed; |
| } |
| |
| ha->fw_dumped = 0; |
| |
| if (!ha->md_tmplt_hdr || !ha->md_dump) { |
| ql_log(ql_log_warn, vha, 0xb10e, |
| "Memory not allocated for minidump capture\n"); |
| goto md_failed; |
| } |
| |
| qla8044_idc_lock(ha); |
| idc_control = qla8044_rd_reg(ha, QLA8044_IDC_DRV_CTRL); |
| if (idc_control & GRACEFUL_RESET_BIT1) { |
| ql_log(ql_log_warn, vha, 0xb112, |
| "Forced reset from application, " |
| "ignore minidump capture\n"); |
| qla8044_wr_reg(ha, QLA8044_IDC_DRV_CTRL, |
| (idc_control & ~GRACEFUL_RESET_BIT1)); |
| qla8044_idc_unlock(ha); |
| |
| goto md_failed; |
| } |
| qla8044_idc_unlock(ha); |
| |
| if (qla82xx_validate_template_chksum(vha)) { |
| ql_log(ql_log_info, vha, 0xb109, |
| "Template checksum validation error\n"); |
| goto md_failed; |
| } |
| |
| tmplt_hdr = (struct qla8044_minidump_template_hdr *) |
| ha->md_tmplt_hdr; |
| data_ptr = (uint32_t *)((uint8_t *)ha->md_dump); |
| num_entry_hdr = tmplt_hdr->num_of_entries; |
| |
| ql_dbg(ql_dbg_p3p, vha, 0xb11a, |
| "Capture Mask obtained: 0x%x\n", tmplt_hdr->capture_debug_level); |
| |
| f_capture_mask = tmplt_hdr->capture_debug_level & 0xFF; |
| |
| /* Validate whether required debug level is set */ |
| if ((f_capture_mask & 0x3) != 0x3) { |
| ql_log(ql_log_warn, vha, 0xb10f, |
| "Minimum required capture mask[0x%x] level not set\n", |
| f_capture_mask); |
| |
| } |
| tmplt_hdr->driver_capture_mask = ql2xmdcapmask; |
| ql_log(ql_log_info, vha, 0xb102, |
| "[%s]: starting data ptr: %p\n", |
| __func__, data_ptr); |
| ql_log(ql_log_info, vha, 0xb10b, |
| "[%s]: no of entry headers in Template: 0x%x\n", |
| __func__, num_entry_hdr); |
| ql_log(ql_log_info, vha, 0xb10c, |
| "[%s]: Total_data_size 0x%x, %d obtained\n", |
| __func__, ha->md_dump_size, ha->md_dump_size); |
| |
| /* Update current timestamp before taking dump */ |
| now = get_jiffies_64(); |
| timestamp = (u32)(jiffies_to_msecs(now) / 1000); |
| tmplt_hdr->driver_timestamp = timestamp; |
| |
| entry_hdr = (struct qla8044_minidump_entry_hdr *) |
| (((uint8_t *)ha->md_tmplt_hdr) + tmplt_hdr->first_entry_offset); |
| tmplt_hdr->saved_state_array[QLA8044_SS_OCM_WNDREG_INDEX] = |
| tmplt_hdr->ocm_window_reg[ha->portnum]; |
| |
| /* Walk through the entry headers - validate/perform required action */ |
| for (i = 0; i < num_entry_hdr; i++) { |
| if (data_collected > ha->md_dump_size) { |
| ql_log(ql_log_info, vha, 0xb103, |
| "Data collected: [0x%x], " |
| "Total Dump size: [0x%x]\n", |
| data_collected, ha->md_dump_size); |
| return rval; |
| } |
| |
| if (!(entry_hdr->d_ctrl.entry_capture_mask & |
| ql2xmdcapmask)) { |
| entry_hdr->d_ctrl.driver_flags |= |
| QLA82XX_DBG_SKIPPED_FLAG; |
| goto skip_nxt_entry; |
| } |
| |
| ql_dbg(ql_dbg_p3p, vha, 0xb104, |
| "Data collected: [0x%x], Dump size left:[0x%x]\n", |
| data_collected, |
| (ha->md_dump_size - data_collected)); |
| |
| /* Decode the entry type and take required action to capture |
| * debug data |
| */ |
| switch (entry_hdr->entry_type) { |
| case QLA82XX_RDEND: |
| qla8044_mark_entry_skipped(vha, entry_hdr, i); |
| break; |
| case QLA82XX_CNTRL: |
| rval = qla8044_minidump_process_control(vha, |
| entry_hdr); |
| if (rval != QLA_SUCCESS) { |
| qla8044_mark_entry_skipped(vha, entry_hdr, i); |
| goto md_failed; |
| } |
| break; |
| case QLA82XX_RDCRB: |
| qla8044_minidump_process_rdcrb(vha, |
| entry_hdr, &data_ptr); |
| break; |
| case QLA82XX_RDMEM: |
| rval = qla8044_minidump_pex_dma_read(vha, |
| entry_hdr, &data_ptr); |
| if (rval != QLA_SUCCESS) { |
| rval = qla8044_minidump_process_rdmem(vha, |
| entry_hdr, &data_ptr); |
| if (rval != QLA_SUCCESS) { |
| qla8044_mark_entry_skipped(vha, |
| entry_hdr, i); |
| goto md_failed; |
| } |
| } |
| break; |
| case QLA82XX_BOARD: |
| case QLA82XX_RDROM: |
| rval = qla8044_minidump_process_rdrom(vha, |
| entry_hdr, &data_ptr); |
| if (rval != QLA_SUCCESS) { |
| qla8044_mark_entry_skipped(vha, |
| entry_hdr, i); |
| } |
| break; |
| case QLA82XX_L2DTG: |
| case QLA82XX_L2ITG: |
| case QLA82XX_L2DAT: |
| case QLA82XX_L2INS: |
| rval = qla8044_minidump_process_l2tag(vha, |
| entry_hdr, &data_ptr); |
| if (rval != QLA_SUCCESS) { |
| qla8044_mark_entry_skipped(vha, entry_hdr, i); |
| goto md_failed; |
| } |
| break; |
| case QLA8044_L1DTG: |
| case QLA8044_L1ITG: |
| case QLA82XX_L1DAT: |
| case QLA82XX_L1INS: |
| qla8044_minidump_process_l1cache(vha, |
| entry_hdr, &data_ptr); |
| break; |
| case QLA82XX_RDOCM: |
| qla8044_minidump_process_rdocm(vha, |
| entry_hdr, &data_ptr); |
| break; |
| case QLA82XX_RDMUX: |
| qla8044_minidump_process_rdmux(vha, |
| entry_hdr, &data_ptr); |
| break; |
| case QLA82XX_QUEUE: |
| qla8044_minidump_process_queue(vha, |
| entry_hdr, &data_ptr); |
| break; |
| case QLA8044_POLLRD: |
| rval = qla8044_minidump_process_pollrd(vha, |
| entry_hdr, &data_ptr); |
| if (rval != QLA_SUCCESS) |
| qla8044_mark_entry_skipped(vha, entry_hdr, i); |
| break; |
| case QLA8044_RDMUX2: |
| qla8044_minidump_process_rdmux2(vha, |
| entry_hdr, &data_ptr); |
| break; |
| case QLA8044_POLLRDMWR: |
| rval = qla8044_minidump_process_pollrdmwr(vha, |
| entry_hdr, &data_ptr); |
| if (rval != QLA_SUCCESS) |
| qla8044_mark_entry_skipped(vha, entry_hdr, i); |
| break; |
| case QLA8044_RDDFE: |
| rval = qla8044_minidump_process_rddfe(vha, entry_hdr, |
| &data_ptr); |
| if (rval != QLA_SUCCESS) |
| qla8044_mark_entry_skipped(vha, entry_hdr, i); |
| break; |
| case QLA8044_RDMDIO: |
| rval = qla8044_minidump_process_rdmdio(vha, entry_hdr, |
| &data_ptr); |
| if (rval != QLA_SUCCESS) |
| qla8044_mark_entry_skipped(vha, entry_hdr, i); |
| break; |
| case QLA8044_POLLWR: |
| rval = qla8044_minidump_process_pollwr(vha, entry_hdr, |
| &data_ptr); |
| if (rval != QLA_SUCCESS) |
| qla8044_mark_entry_skipped(vha, entry_hdr, i); |
| break; |
| case QLA82XX_RDNOP: |
| default: |
| qla8044_mark_entry_skipped(vha, entry_hdr, i); |
| break; |
| } |
| |
| data_collected = (uint8_t *)data_ptr - |
| (uint8_t *)((uint8_t *)ha->md_dump); |
| skip_nxt_entry: |
| /* |
| * next entry in the template |
| */ |
| entry_hdr = (struct qla8044_minidump_entry_hdr *) |
| (((uint8_t *)entry_hdr) + entry_hdr->entry_size); |
| } |
| |
| if (data_collected != ha->md_dump_size) { |
| ql_log(ql_log_info, vha, 0xb105, |
| "Dump data mismatch: Data collected: " |
| "[0x%x], total_data_size:[0x%x]\n", |
| data_collected, ha->md_dump_size); |
| rval = QLA_FUNCTION_FAILED; |
| goto md_failed; |
| } |
| |
| ql_log(ql_log_info, vha, 0xb110, |
| "Firmware dump saved to temp buffer (%ld/%p %ld/%p).\n", |
| vha->host_no, ha->md_tmplt_hdr, vha->host_no, ha->md_dump); |
| ha->fw_dumped = 1; |
| qla2x00_post_uevent_work(vha, QLA_UEVENT_CODE_FW_DUMP); |
| |
| |
| ql_log(ql_log_info, vha, 0xb106, |
| "Leaving fn: %s Last entry: 0x%x\n", |
| __func__, i); |
| md_failed: |
| return rval; |
| } |
| |
| void |
| qla8044_get_minidump(struct scsi_qla_host *vha) |
| { |
| struct qla_hw_data *ha = vha->hw; |
| |
| if (!qla8044_collect_md_data(vha)) { |
| ha->fw_dumped = 1; |
| ha->prev_minidump_failed = 0; |
| } else { |
| ql_log(ql_log_fatal, vha, 0xb0db, |
| "%s: Unable to collect minidump\n", |
| __func__); |
| ha->prev_minidump_failed = 1; |
| } |
| } |
| |
| static int |
| qla8044_poll_flash_status_reg(struct scsi_qla_host *vha) |
| { |
| uint32_t flash_status; |
| int retries = QLA8044_FLASH_READ_RETRY_COUNT; |
| int ret_val = QLA_SUCCESS; |
| |
| while (retries--) { |
| ret_val = qla8044_rd_reg_indirect(vha, QLA8044_FLASH_STATUS, |
| &flash_status); |
| if (ret_val) { |
| ql_log(ql_log_warn, vha, 0xb13c, |
| "%s: Failed to read FLASH_STATUS reg.\n", |
| __func__); |
| break; |
| } |
| if ((flash_status & QLA8044_FLASH_STATUS_READY) == |
| QLA8044_FLASH_STATUS_READY) |
| break; |
| msleep(QLA8044_FLASH_STATUS_REG_POLL_DELAY); |
| } |
| |
| if (!retries) |
| ret_val = QLA_FUNCTION_FAILED; |
| |
| return ret_val; |
| } |
| |
| static int |
| qla8044_write_flash_status_reg(struct scsi_qla_host *vha, |
| uint32_t data) |
| { |
| int ret_val = QLA_SUCCESS; |
| uint32_t cmd; |
| |
| cmd = vha->hw->fdt_wrt_sts_reg_cmd; |
| |
| ret_val = qla8044_wr_reg_indirect(vha, QLA8044_FLASH_ADDR, |
| QLA8044_FLASH_STATUS_WRITE_DEF_SIG | cmd); |
| if (ret_val) { |
| ql_log(ql_log_warn, vha, 0xb125, |
| "%s: Failed to write to FLASH_ADDR.\n", __func__); |
| goto exit_func; |
| } |
| |
| ret_val = qla8044_wr_reg_indirect(vha, QLA8044_FLASH_WRDATA, data); |
| if (ret_val) { |
| ql_log(ql_log_warn, vha, 0xb126, |
| "%s: Failed to write to FLASH_WRDATA.\n", __func__); |
| goto exit_func; |
| } |
| |
| ret_val = qla8044_wr_reg_indirect(vha, QLA8044_FLASH_CONTROL, |
| QLA8044_FLASH_SECOND_ERASE_MS_VAL); |
| if (ret_val) { |
| ql_log(ql_log_warn, vha, 0xb127, |
| "%s: Failed to write to FLASH_CONTROL.\n", __func__); |
| goto exit_func; |
| } |
| |
| ret_val = qla8044_poll_flash_status_reg(vha); |
| if (ret_val) |
| ql_log(ql_log_warn, vha, 0xb128, |
| "%s: Error polling flash status reg.\n", __func__); |
| |
| exit_func: |
| return ret_val; |
| } |
| |
| /* |
| * This function assumes that the flash lock is held. |
| */ |
| static int |
| qla8044_unprotect_flash(scsi_qla_host_t *vha) |
| { |
| int ret_val; |
| struct qla_hw_data *ha = vha->hw; |
| |
| ret_val = qla8044_write_flash_status_reg(vha, ha->fdt_wrt_enable); |
| if (ret_val) |
| ql_log(ql_log_warn, vha, 0xb139, |
| "%s: Write flash status failed.\n", __func__); |
| |
| return ret_val; |
| } |
| |
| /* |
| * This function assumes that the flash lock is held. |
| */ |
| static int |
| qla8044_protect_flash(scsi_qla_host_t *vha) |
| { |
| int ret_val; |
| struct qla_hw_data *ha = vha->hw; |
| |
| ret_val = qla8044_write_flash_status_reg(vha, ha->fdt_wrt_disable); |
| if (ret_val) |
| ql_log(ql_log_warn, vha, 0xb13b, |
| "%s: Write flash status failed.\n", __func__); |
| |
| return ret_val; |
| } |
| |
| |
| static int |
| qla8044_erase_flash_sector(struct scsi_qla_host *vha, |
| uint32_t sector_start_addr) |
| { |
| uint32_t reversed_addr; |
| int ret_val = QLA_SUCCESS; |
| |
| ret_val = qla8044_poll_flash_status_reg(vha); |
| if (ret_val) { |
| ql_log(ql_log_warn, vha, 0xb12e, |
| "%s: Poll flash status after erase failed..\n", __func__); |
| } |
| |
| reversed_addr = (((sector_start_addr & 0xFF) << 16) | |
| (sector_start_addr & 0xFF00) | |
| ((sector_start_addr & 0xFF0000) >> 16)); |
| |
| ret_val = qla8044_wr_reg_indirect(vha, |
| QLA8044_FLASH_WRDATA, reversed_addr); |
| if (ret_val) { |
| ql_log(ql_log_warn, vha, 0xb12f, |
| "%s: Failed to write to FLASH_WRDATA.\n", __func__); |
| } |
| ret_val = qla8044_wr_reg_indirect(vha, QLA8044_FLASH_ADDR, |
| QLA8044_FLASH_ERASE_SIG | vha->hw->fdt_erase_cmd); |
| if (ret_val) { |
| ql_log(ql_log_warn, vha, 0xb130, |
| "%s: Failed to write to FLASH_ADDR.\n", __func__); |
| } |
| ret_val = qla8044_wr_reg_indirect(vha, QLA8044_FLASH_CONTROL, |
| QLA8044_FLASH_LAST_ERASE_MS_VAL); |
| if (ret_val) { |
| ql_log(ql_log_warn, vha, 0xb131, |
| "%s: Failed write to FLASH_CONTROL.\n", __func__); |
| } |
| ret_val = qla8044_poll_flash_status_reg(vha); |
| if (ret_val) { |
| ql_log(ql_log_warn, vha, 0xb132, |
| "%s: Poll flash status failed.\n", __func__); |
| } |
| |
| |
| return ret_val; |
| } |
| |
| /* |
| * qla8044_flash_write_u32 - Write data to flash |
| * |
| * @ha : Pointer to adapter structure |
| * addr : Flash address to write to |
| * p_data : Data to be written |
| * |
| * Return Value - QLA_SUCCESS/QLA_FUNCTION_FAILED |
| * |
| * NOTE: Lock should be held on entry |
| */ |
| static int |
| qla8044_flash_write_u32(struct scsi_qla_host *vha, uint32_t addr, |
| uint32_t *p_data) |
| { |
| int ret_val = QLA_SUCCESS; |
| |
| ret_val = qla8044_wr_reg_indirect(vha, QLA8044_FLASH_ADDR, |
| 0x00800000 | (addr >> 2)); |
| if (ret_val) { |
| ql_log(ql_log_warn, vha, 0xb134, |
| "%s: Failed write to FLASH_ADDR.\n", __func__); |
| goto exit_func; |
| } |
| ret_val = qla8044_wr_reg_indirect(vha, QLA8044_FLASH_WRDATA, *p_data); |
| if (ret_val) { |
| ql_log(ql_log_warn, vha, 0xb135, |
| "%s: Failed write to FLASH_WRDATA.\n", __func__); |
| goto exit_func; |
| } |
| ret_val = qla8044_wr_reg_indirect(vha, QLA8044_FLASH_CONTROL, 0x3D); |
| if (ret_val) { |
| ql_log(ql_log_warn, vha, 0xb136, |
| "%s: Failed write to FLASH_CONTROL.\n", __func__); |
| goto exit_func; |
| } |
| ret_val = qla8044_poll_flash_status_reg(vha); |
| if (ret_val) { |
| ql_log(ql_log_warn, vha, 0xb137, |
| "%s: Poll flash status failed.\n", __func__); |
| } |
| |
| exit_func: |
| return ret_val; |
| } |
| |
| static int |
| qla8044_write_flash_buffer_mode(scsi_qla_host_t *vha, uint32_t *dwptr, |
| uint32_t faddr, uint32_t dwords) |
| { |
| int ret = QLA_FUNCTION_FAILED; |
| uint32_t spi_val; |
| |
| if (dwords < QLA8044_MIN_OPTROM_BURST_DWORDS || |
| dwords > QLA8044_MAX_OPTROM_BURST_DWORDS) { |
| ql_dbg(ql_dbg_user, vha, 0xb123, |
| "Got unsupported dwords = 0x%x.\n", |
| dwords); |
| return QLA_FUNCTION_FAILED; |
| } |
| |
| qla8044_rd_reg_indirect(vha, QLA8044_FLASH_SPI_CONTROL, &spi_val); |
| qla8044_wr_reg_indirect(vha, QLA8044_FLASH_SPI_CONTROL, |
| spi_val | QLA8044_FLASH_SPI_CTL); |
| qla8044_wr_reg_indirect(vha, QLA8044_FLASH_ADDR, |
| QLA8044_FLASH_FIRST_TEMP_VAL); |
| |
| /* First DWORD write to FLASH_WRDATA */ |
| ret = qla8044_wr_reg_indirect(vha, QLA8044_FLASH_WRDATA, |
| *dwptr++); |
| qla8044_wr_reg_indirect(vha, QLA8044_FLASH_CONTROL, |
| QLA8044_FLASH_FIRST_MS_PATTERN); |
| |
| ret = qla8044_poll_flash_status_reg(vha); |
| if (ret) { |
| ql_log(ql_log_warn, vha, 0xb124, |
| "%s: Failed.\n", __func__); |
| goto exit_func; |
| } |
| |
| dwords--; |
| |
| qla8044_wr_reg_indirect(vha, QLA8044_FLASH_ADDR, |
| QLA8044_FLASH_SECOND_TEMP_VAL); |
| |
| |
| /* Second to N-1 DWORDS writes */ |
| while (dwords != 1) { |
| qla8044_wr_reg_indirect(vha, QLA8044_FLASH_WRDATA, *dwptr++); |
| qla8044_wr_reg_indirect(vha, QLA8044_FLASH_CONTROL, |
| QLA8044_FLASH_SECOND_MS_PATTERN); |
| ret = qla8044_poll_flash_status_reg(vha); |
| if (ret) { |
| ql_log(ql_log_warn, vha, 0xb129, |
| "%s: Failed.\n", __func__); |
| goto exit_func; |
| } |
| dwords--; |
| } |
| |
| qla8044_wr_reg_indirect(vha, QLA8044_FLASH_ADDR, |
| QLA8044_FLASH_FIRST_TEMP_VAL | (faddr >> 2)); |
| |
| /* Last DWORD write */ |
| qla8044_wr_reg_indirect(vha, QLA8044_FLASH_WRDATA, *dwptr++); |
| qla8044_wr_reg_indirect(vha, QLA8044_FLASH_CONTROL, |
| QLA8044_FLASH_LAST_MS_PATTERN); |
| ret = qla8044_poll_flash_status_reg(vha); |
| if (ret) { |
| ql_log(ql_log_warn, vha, 0xb12a, |
| "%s: Failed.\n", __func__); |
| goto exit_func; |
| } |
| qla8044_rd_reg_indirect(vha, QLA8044_FLASH_SPI_STATUS, &spi_val); |
| |
| if ((spi_val & QLA8044_FLASH_SPI_CTL) == QLA8044_FLASH_SPI_CTL) { |
| ql_log(ql_log_warn, vha, 0xb12b, |
| "%s: Failed.\n", __func__); |
| spi_val = 0; |
| /* Operation failed, clear error bit. */ |
| qla8044_rd_reg_indirect(vha, QLA8044_FLASH_SPI_CONTROL, |
| &spi_val); |
| qla8044_wr_reg_indirect(vha, QLA8044_FLASH_SPI_CONTROL, |
| spi_val | QLA8044_FLASH_SPI_CTL); |
| } |
| exit_func: |
| return ret; |
| } |
| |
| static int |
| qla8044_write_flash_dword_mode(scsi_qla_host_t *vha, uint32_t *dwptr, |
| uint32_t faddr, uint32_t dwords) |
| { |
| int ret = QLA_FUNCTION_FAILED; |
| uint32_t liter; |
| |
| for (liter = 0; liter < dwords; liter++, faddr += 4, dwptr++) { |
| ret = qla8044_flash_write_u32(vha, faddr, dwptr); |
| if (ret) { |
| ql_dbg(ql_dbg_p3p, vha, 0xb141, |
| "%s: flash address=%x data=%x.\n", __func__, |
| faddr, *dwptr); |
| break; |
| } |
| } |
| |
| return ret; |
| } |
| |
| int |
| qla8044_write_optrom_data(struct scsi_qla_host *vha, uint8_t *buf, |
| uint32_t offset, uint32_t length) |
| { |
| int rval = QLA_FUNCTION_FAILED, i, burst_iter_count; |
| int dword_count, erase_sec_count; |
| uint32_t erase_offset; |
| uint8_t *p_cache, *p_src; |
| |
| erase_offset = offset; |
| |
| p_cache = kcalloc(length, sizeof(uint8_t), GFP_KERNEL); |
| if (!p_cache) |
| return QLA_FUNCTION_FAILED; |
| |
| memcpy(p_cache, buf, length); |
| p_src = p_cache; |
| dword_count = length / sizeof(uint32_t); |
| /* Since the offset and legth are sector aligned, it will be always |
| * multiple of burst_iter_count (64) |
| */ |
| burst_iter_count = dword_count / QLA8044_MAX_OPTROM_BURST_DWORDS; |
| erase_sec_count = length / QLA8044_SECTOR_SIZE; |
| |
| /* Suspend HBA. */ |
| scsi_block_requests(vha->host); |
| /* Lock and enable write for whole operation. */ |
| qla8044_flash_lock(vha); |
| qla8044_unprotect_flash(vha); |
| |
| /* Erasing the sectors */ |
| for (i = 0; i < erase_sec_count; i++) { |
| rval = qla8044_erase_flash_sector(vha, erase_offset); |
| ql_dbg(ql_dbg_user, vha, 0xb138, |
| "Done erase of sector=0x%x.\n", |
| erase_offset); |
| if (rval) { |
| ql_log(ql_log_warn, vha, 0xb121, |
| "Failed to erase the sector having address: " |
| "0x%x.\n", erase_offset); |
| goto out; |
| } |
| erase_offset += QLA8044_SECTOR_SIZE; |
| } |
| ql_dbg(ql_dbg_user, vha, 0xb13f, |
| "Got write for addr = 0x%x length=0x%x.\n", |
| offset, length); |
| |
| for (i = 0; i < burst_iter_count; i++) { |
| |
| /* Go with write. */ |
| rval = qla8044_write_flash_buffer_mode(vha, (uint32_t *)p_src, |
| offset, QLA8044_MAX_OPTROM_BURST_DWORDS); |
| if (rval) { |
| /* Buffer Mode failed skip to dword mode */ |
| ql_log(ql_log_warn, vha, 0xb122, |
| "Failed to write flash in buffer mode, " |
| "Reverting to slow-write.\n"); |
| rval = qla8044_write_flash_dword_mode(vha, |
| (uint32_t *)p_src, offset, |
| QLA8044_MAX_OPTROM_BURST_DWORDS); |
| } |
| p_src += sizeof(uint32_t) * QLA8044_MAX_OPTROM_BURST_DWORDS; |
| offset += sizeof(uint32_t) * QLA8044_MAX_OPTROM_BURST_DWORDS; |
| } |
| ql_dbg(ql_dbg_user, vha, 0xb133, |
| "Done writing.\n"); |
| |
| out: |
| qla8044_protect_flash(vha); |
| qla8044_flash_unlock(vha); |
| scsi_unblock_requests(vha->host); |
| kfree(p_cache); |
| |
| return rval; |
| } |
| |
| #define LEG_INT_PTR_B31 (1 << 31) |
| #define LEG_INT_PTR_B30 (1 << 30) |
| #define PF_BITS_MASK (0xF << 16) |
| /** |
| * qla8044_intr_handler() - Process interrupts for the ISP8044 |
| * @irq: |
| * @dev_id: SCSI driver HA context |
| * |
| * Called by system whenever the host adapter generates an interrupt. |
| * |
| * Returns handled flag. |
| */ |
| irqreturn_t |
| qla8044_intr_handler(int irq, void *dev_id) |
| { |
| scsi_qla_host_t *vha; |
| struct qla_hw_data *ha; |
| struct rsp_que *rsp; |
| struct device_reg_82xx __iomem *reg; |
| int status = 0; |
| unsigned long flags; |
| unsigned long iter; |
| uint32_t stat; |
| uint16_t mb[4]; |
| uint32_t leg_int_ptr = 0, pf_bit; |
| |
| rsp = (struct rsp_que *) dev_id; |
| if (!rsp) { |
| ql_log(ql_log_info, NULL, 0xb143, |
| "%s(): NULL response queue pointer\n", __func__); |
| return IRQ_NONE; |
| } |
| ha = rsp->hw; |
| vha = pci_get_drvdata(ha->pdev); |
| |
| if (unlikely(pci_channel_offline(ha->pdev))) |
| return IRQ_HANDLED; |
| |
| leg_int_ptr = qla8044_rd_reg(ha, LEG_INTR_PTR_OFFSET); |
| |
| /* Legacy interrupt is valid if bit31 of leg_int_ptr is set */ |
| if (!(leg_int_ptr & (LEG_INT_PTR_B31))) { |
| ql_dbg(ql_dbg_p3p, vha, 0xb144, |
| "%s: Legacy Interrupt Bit 31 not set, " |
| "spurious interrupt!\n", __func__); |
| return IRQ_NONE; |
| } |
| |
| pf_bit = ha->portnum << 16; |
| /* Validate the PCIE function ID set in leg_int_ptr bits [19..16] */ |
| if ((leg_int_ptr & (PF_BITS_MASK)) != pf_bit) { |
| ql_dbg(ql_dbg_p3p, vha, 0xb145, |
| "%s: Incorrect function ID 0x%x in " |
| "legacy interrupt register, " |
| "ha->pf_bit = 0x%x\n", __func__, |
| (leg_int_ptr & (PF_BITS_MASK)), pf_bit); |
| return IRQ_NONE; |
| } |
| |
| /* To de-assert legacy interrupt, write 0 to Legacy Interrupt Trigger |
| * Control register and poll till Legacy Interrupt Pointer register |
| * bit32 is 0. |
| */ |
| qla8044_wr_reg(ha, LEG_INTR_TRIG_OFFSET, 0); |
| do { |
| leg_int_ptr = qla8044_rd_reg(ha, LEG_INTR_PTR_OFFSET); |
| if ((leg_int_ptr & (PF_BITS_MASK)) != pf_bit) |
| break; |
| } while (leg_int_ptr & (LEG_INT_PTR_B30)); |
| |
| reg = &ha->iobase->isp82; |
| spin_lock_irqsave(&ha->hardware_lock, flags); |
| for (iter = 1; iter--; ) { |
| |
| if (RD_REG_DWORD(®->host_int)) { |
| stat = RD_REG_DWORD(®->host_status); |
| if ((stat & HSRX_RISC_INT) == 0) |
| break; |
| |
| switch (stat & 0xff) { |
| case 0x1: |
| case 0x2: |
| case 0x10: |
| case 0x11: |
| qla82xx_mbx_completion(vha, MSW(stat)); |
| status |= MBX_INTERRUPT; |
| break; |
| case 0x12: |
| mb[0] = MSW(stat); |
| mb[1] = RD_REG_WORD(®->mailbox_out[1]); |
| mb[2] = RD_REG_WORD(®->mailbox_out[2]); |
| mb[3] = RD_REG_WORD(®->mailbox_out[3]); |
| qla2x00_async_event(vha, rsp, mb); |
| break; |
| case 0x13: |
| qla24xx_process_response_queue(vha, rsp); |
| break; |
| default: |
| ql_dbg(ql_dbg_p3p, vha, 0xb146, |
| "Unrecognized interrupt type " |
| "(%d).\n", stat & 0xff); |
| break; |
| } |
| } |
| WRT_REG_DWORD(®->host_int, 0); |
| } |
| |
| qla2x00_handle_mbx_completion(ha, status); |
| spin_unlock_irqrestore(&ha->hardware_lock, flags); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int |
| qla8044_idc_dontreset(struct qla_hw_data *ha) |
| { |
| uint32_t idc_ctrl; |
| |
| idc_ctrl = qla8044_rd_reg(ha, QLA8044_IDC_DRV_CTRL); |
| return idc_ctrl & DONTRESET_BIT0; |
| } |
| |
| static void |
| qla8044_clear_rst_ready(scsi_qla_host_t *vha) |
| { |
| uint32_t drv_state; |
| |
| drv_state = qla8044_rd_direct(vha, QLA8044_CRB_DRV_STATE_INDEX); |
| |
| /* |
| * For ISP8044, drv_active register has 1 bit per function, |
| * shift 1 by func_num to set a bit for the function. |
| * For ISP82xx, drv_active has 4 bits per function |
| */ |
| drv_state &= ~(1 << vha->hw->portnum); |
| |
| ql_dbg(ql_dbg_p3p, vha, 0xb13d, |
| "drv_state: 0x%08x\n", drv_state); |
| qla8044_wr_direct(vha, QLA8044_CRB_DRV_STATE_INDEX, drv_state); |
| } |
| |
| int |
| qla8044_abort_isp(scsi_qla_host_t *vha) |
| { |
| int rval; |
| uint32_t dev_state; |
| struct qla_hw_data *ha = vha->hw; |
| |
| qla8044_idc_lock(ha); |
| dev_state = qla8044_rd_direct(vha, QLA8044_CRB_DEV_STATE_INDEX); |
| |
| if (ql2xdontresethba) |
| qla8044_set_idc_dontreset(vha); |
| |
| /* If device_state is NEED_RESET, go ahead with |
| * Reset,irrespective of ql2xdontresethba. This is to allow a |
| * non-reset-owner to force a reset. Non-reset-owner sets |
| * the IDC_CTRL BIT0 to prevent Reset-owner from doing a Reset |
| * and then forces a Reset by setting device_state to |
| * NEED_RESET. */ |
| if (dev_state == QLA8XXX_DEV_READY) { |
| /* If IDC_CTRL DONTRESETHBA_BIT0 is set don't do reset |
| * recovery */ |
| if (qla8044_idc_dontreset(ha) == DONTRESET_BIT0) { |
| ql_dbg(ql_dbg_p3p, vha, 0xb13e, |
| "Reset recovery disabled\n"); |
| rval = QLA_FUNCTION_FAILED; |
| goto exit_isp_reset; |
| } |
| |
| ql_dbg(ql_dbg_p3p, vha, 0xb140, |
| "HW State: NEED RESET\n"); |
| qla8044_wr_direct(vha, QLA8044_CRB_DEV_STATE_INDEX, |
| QLA8XXX_DEV_NEED_RESET); |
| } |
| |
| /* For ISP8044, Reset owner is NIC, iSCSI or FCOE based on priority |
| * and which drivers are present. Unlike ISP82XX, the function setting |
| * NEED_RESET, may not be the Reset owner. */ |
| qla83xx_reset_ownership(vha); |
| |
| qla8044_idc_unlock(ha); |
| rval = qla8044_device_state_handler(vha); |
| qla8044_idc_lock(ha); |
| qla8044_clear_rst_ready(vha); |
| |
| exit_isp_reset: |
| qla8044_idc_unlock(ha); |
| if (rval == QLA_SUCCESS) { |
| ha->flags.isp82xx_fw_hung = 0; |
| ha->flags.nic_core_reset_hdlr_active = 0; |
| rval = qla82xx_restart_isp(vha); |
| } |
| |
| return rval; |
| } |
| |
| void |
| qla8044_fw_dump(scsi_qla_host_t *vha, int hardware_locked) |
| { |
| struct qla_hw_data *ha = vha->hw; |
| |
| if (!ha->allow_cna_fw_dump) |
| return; |
| |
| scsi_block_requests(vha->host); |
| ha->flags.isp82xx_no_md_cap = 1; |
| qla8044_idc_lock(ha); |
| qla82xx_set_reset_owner(vha); |
| qla8044_idc_unlock(ha); |
| qla2x00_wait_for_chip_reset(vha); |
| scsi_unblock_requests(vha->host); |
| } |