Documentation/devicetree/bindings/display/bridge/ti,tfp410.txt

TFP410 DPI to DVI encoder
=========================

Required properties:
- compatible: "ti,tfp410"

Optional properties:
- powerdown-gpios: power-down gpio
- reg: I2C address. If and only if present the device node
       should be placed into the i2c controller node where the
       tfp410 i2c is connected to.

Required nodes:
- Video port 0 for DPI input [1].
- Video port 1 for DVI output [1].

[1]: Documentation/devicetree/bindings/media/video-interfaces.txt

Example
-------

tfp410: encoder@0 {
	compatible = "ti,tfp410";
	powerdown-gpios = <&twl_gpio 2 GPIO_ACTIVE_LOW>;

	ports {
		#address-cells = <1>;
		#size-cells = <0>;

		port@0 {
			reg = <0>;

			tfp410_in: endpoint@0 {
				remote-endpoint = <&dpi_out>;
			};
		};

		port@1 {
			reg = <1>;

			tfp410_out: endpoint@0 {
				remote-endpoint = <&dvi_connector_in>;
			};
		};
	};
};