| * SPEAr SMI |
| |
| Required properties: |
| - compatible : "st,spear600-smi" |
| - reg : Address range of the mtd chip |
| - #address-cells, #size-cells : Must be present if the device has sub-nodes |
| representing partitions. |
| - interrupt-parent: Should be the phandle for the interrupt controller |
| that services interrupts for this device |
| - interrupts: Should contain the STMMAC interrupts |
| - clock-rate : Functional clock rate of SMI in Hz |
| |
| Optional properties: |
| - st,smi-fast-mode : Flash supports read in fast mode |
| |
| Example: |
| |
| smi: flash@fc000000 { |
| compatible = "st,spear600-smi"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0xfc000000 0x1000>; |
| interrupt-parent = <&vic1>; |
| interrupts = <12>; |
| clock-rate = <50000000>; /* 50MHz */ |
| |
| flash@f8000000 { |
| st,smi-fast-mode; |
| ... |
| }; |
| }; |
