| Binding for Broadcom BCM6328 High Speed SPI controller |
| |
| Required properties: |
| - compatible: must contain of "brcm,bcm6328-hsspi". |
| - reg: Base address and size of the controllers memory area. |
| - interrupts: Interrupt for the SPI block. |
| - clocks: phandles of the SPI clock and the PLL clock. |
| - clock-names: must be "hsspi", "pll". |
| - #address-cells: <1>, as required by generic SPI binding. |
| - #size-cells: <0>, also as required by generic SPI binding. |
| |
| Optional properties: |
| - num-cs: some controllers have less than 8 cs signals. Defaults to 8 |
| if absent. |
| |
| Child nodes as per the generic SPI binding. |
| |
| Example: |
| |
| spi@10001000 { |
| compatible = "brcm,bcm6328-hsspi"; |
| reg = <0x10001000 0x600>; |
| |
| interrupts = <29>; |
| |
| clocks = <&clkctl 9>, <&hsspi_pll>; |
| clock-names = "hsspi", "pll"; |
| |
| num-cs = <2>; |
| |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
