| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright IBM Corp. 2000, 2006 |
| * Author(s): Denis Joseph Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com) |
| * Gerhard Tonn (ton@de.ibm.com) |
| * |
| * Copyright (C) 1991, 1992 Linus Torvalds |
| * |
| * 1997-11-28 Modified for POSIX.1b signals by Richard Henderson |
| */ |
| |
| #include <linux/compat.h> |
| #include <linux/sched.h> |
| #include <linux/sched/task_stack.h> |
| #include <linux/mm.h> |
| #include <linux/smp.h> |
| #include <linux/kernel.h> |
| #include <linux/signal.h> |
| #include <linux/errno.h> |
| #include <linux/wait.h> |
| #include <linux/ptrace.h> |
| #include <linux/unistd.h> |
| #include <linux/stddef.h> |
| #include <linux/tty.h> |
| #include <linux/personality.h> |
| #include <linux/binfmts.h> |
| #include <asm/ucontext.h> |
| #include <linux/uaccess.h> |
| #include <asm/lowcore.h> |
| #include <asm/switch_to.h> |
| #include "compat_linux.h" |
| #include "compat_ptrace.h" |
| #include "entry.h" |
| |
| typedef struct |
| { |
| __u8 callee_used_stack[__SIGNAL_FRAMESIZE32]; |
| struct sigcontext32 sc; |
| _sigregs32 sregs; |
| int signo; |
| _sigregs_ext32 sregs_ext; |
| __u16 svc_insn; /* Offset of svc_insn is NOT fixed! */ |
| } sigframe32; |
| |
| typedef struct |
| { |
| __u8 callee_used_stack[__SIGNAL_FRAMESIZE32]; |
| __u16 svc_insn; |
| compat_siginfo_t info; |
| struct ucontext32 uc; |
| } rt_sigframe32; |
| |
| static inline void sigset_to_sigset32(unsigned long *set64, |
| compat_sigset_word *set32) |
| { |
| set32[0] = (compat_sigset_word) set64[0]; |
| set32[1] = (compat_sigset_word)(set64[0] >> 32); |
| } |
| |
| static inline void sigset32_to_sigset(compat_sigset_word *set32, |
| unsigned long *set64) |
| { |
| set64[0] = (unsigned long) set32[0] | ((unsigned long) set32[1] << 32); |
| } |
| |
| int copy_siginfo_to_user32(compat_siginfo_t __user *to, const siginfo_t *from) |
| { |
| int err; |
| |
| /* If you change siginfo_t structure, please be sure |
| this code is fixed accordingly. |
| It should never copy any pad contained in the structure |
| to avoid security leaks, but must copy the generic |
| 3 ints plus the relevant union member. |
| This routine must convert siginfo from 64bit to 32bit as well |
| at the same time. */ |
| err = __put_user(from->si_signo, &to->si_signo); |
| err |= __put_user(from->si_errno, &to->si_errno); |
| err |= __put_user(from->si_code, &to->si_code); |
| if (from->si_code < 0) |
| err |= __copy_to_user(&to->_sifields._pad, &from->_sifields._pad, SI_PAD_SIZE); |
| else { |
| switch (siginfo_layout(from->si_signo, from->si_code)) { |
| case SIL_RT: |
| err |= __put_user(from->si_int, &to->si_int); |
| /* fallthrough */ |
| case SIL_KILL: |
| err |= __put_user(from->si_pid, &to->si_pid); |
| err |= __put_user(from->si_uid, &to->si_uid); |
| break; |
| case SIL_CHLD: |
| err |= __put_user(from->si_pid, &to->si_pid); |
| err |= __put_user(from->si_uid, &to->si_uid); |
| err |= __put_user(from->si_utime, &to->si_utime); |
| err |= __put_user(from->si_stime, &to->si_stime); |
| err |= __put_user(from->si_status, &to->si_status); |
| break; |
| case SIL_FAULT: |
| err |= __put_user((unsigned long) from->si_addr, |
| &to->si_addr); |
| break; |
| case SIL_POLL: |
| err |= __put_user(from->si_band, &to->si_band); |
| err |= __put_user(from->si_fd, &to->si_fd); |
| break; |
| case SIL_TIMER: |
| err |= __put_user(from->si_tid, &to->si_tid); |
| err |= __put_user(from->si_overrun, &to->si_overrun); |
| err |= __put_user(from->si_int, &to->si_int); |
| break; |
| default: |
| break; |
| } |
| } |
| return err ? -EFAULT : 0; |
| } |
| |
| int copy_siginfo_from_user32(siginfo_t *to, compat_siginfo_t __user *from) |
| { |
| int err; |
| u32 tmp; |
| |
| err = __get_user(to->si_signo, &from->si_signo); |
| err |= __get_user(to->si_errno, &from->si_errno); |
| err |= __get_user(to->si_code, &from->si_code); |
| |
| if (to->si_code < 0) |
| err |= __copy_from_user(&to->_sifields._pad, &from->_sifields._pad, SI_PAD_SIZE); |
| else { |
| switch (siginfo_layout(to->si_signo, to->si_code)) { |
| case SIL_RT: |
| err |= __get_user(to->si_int, &from->si_int); |
| /* fallthrough */ |
| case SIL_KILL: |
| err |= __get_user(to->si_pid, &from->si_pid); |
| err |= __get_user(to->si_uid, &from->si_uid); |
| break; |
| case SIL_CHLD: |
| err |= __get_user(to->si_pid, &from->si_pid); |
| err |= __get_user(to->si_uid, &from->si_uid); |
| err |= __get_user(to->si_utime, &from->si_utime); |
| err |= __get_user(to->si_stime, &from->si_stime); |
| err |= __get_user(to->si_status, &from->si_status); |
| break; |
| case SIL_FAULT: |
| err |= __get_user(tmp, &from->si_addr); |
| to->si_addr = (void __force __user *) |
| (u64) (tmp & PSW32_ADDR_INSN); |
| break; |
| case SIL_POLL: |
| err |= __get_user(to->si_band, &from->si_band); |
| err |= __get_user(to->si_fd, &from->si_fd); |
| break; |
| case SIL_TIMER: |
| err |= __get_user(to->si_tid, &from->si_tid); |
| err |= __get_user(to->si_overrun, &from->si_overrun); |
| err |= __get_user(to->si_int, &from->si_int); |
| break; |
| default: |
| break; |
| } |
| } |
| return err ? -EFAULT : 0; |
| } |
| |
| /* Store registers needed to create the signal frame */ |
| static void store_sigregs(void) |
| { |
| save_access_regs(current->thread.acrs); |
| save_fpu_regs(); |
| } |
| |
| /* Load registers after signal return */ |
| static void load_sigregs(void) |
| { |
| restore_access_regs(current->thread.acrs); |
| } |
| |
| static int save_sigregs32(struct pt_regs *regs, _sigregs32 __user *sregs) |
| { |
| _sigregs32 user_sregs; |
| int i; |
| |
| user_sregs.regs.psw.mask = (__u32)(regs->psw.mask >> 32); |
| user_sregs.regs.psw.mask &= PSW32_MASK_USER | PSW32_MASK_RI; |
| user_sregs.regs.psw.mask |= PSW32_USER_BITS; |
| user_sregs.regs.psw.addr = (__u32) regs->psw.addr | |
| (__u32)(regs->psw.mask & PSW_MASK_BA); |
| for (i = 0; i < NUM_GPRS; i++) |
| user_sregs.regs.gprs[i] = (__u32) regs->gprs[i]; |
| memcpy(&user_sregs.regs.acrs, current->thread.acrs, |
| sizeof(user_sregs.regs.acrs)); |
| fpregs_store((_s390_fp_regs *) &user_sregs.fpregs, ¤t->thread.fpu); |
| if (__copy_to_user(sregs, &user_sregs, sizeof(_sigregs32))) |
| return -EFAULT; |
| return 0; |
| } |
| |
| static int restore_sigregs32(struct pt_regs *regs,_sigregs32 __user *sregs) |
| { |
| _sigregs32 user_sregs; |
| int i; |
| |
| /* Alwys make any pending restarted system call return -EINTR */ |
| current->restart_block.fn = do_no_restart_syscall; |
| |
| if (__copy_from_user(&user_sregs, &sregs->regs, sizeof(user_sregs))) |
| return -EFAULT; |
| |
| if (!is_ri_task(current) && (user_sregs.regs.psw.mask & PSW32_MASK_RI)) |
| return -EINVAL; |
| |
| /* Test the floating-point-control word. */ |
| if (test_fp_ctl(user_sregs.fpregs.fpc)) |
| return -EINVAL; |
| |
| /* Use regs->psw.mask instead of PSW_USER_BITS to preserve PER bit. */ |
| regs->psw.mask = (regs->psw.mask & ~(PSW_MASK_USER | PSW_MASK_RI)) | |
| (__u64)(user_sregs.regs.psw.mask & PSW32_MASK_USER) << 32 | |
| (__u64)(user_sregs.regs.psw.mask & PSW32_MASK_RI) << 32 | |
| (__u64)(user_sregs.regs.psw.addr & PSW32_ADDR_AMODE); |
| /* Check for invalid user address space control. */ |
| if ((regs->psw.mask & PSW_MASK_ASC) == PSW_ASC_HOME) |
| regs->psw.mask = PSW_ASC_PRIMARY | |
| (regs->psw.mask & ~PSW_MASK_ASC); |
| regs->psw.addr = (__u64)(user_sregs.regs.psw.addr & PSW32_ADDR_INSN); |
| for (i = 0; i < NUM_GPRS; i++) |
| regs->gprs[i] = (__u64) user_sregs.regs.gprs[i]; |
| memcpy(¤t->thread.acrs, &user_sregs.regs.acrs, |
| sizeof(current->thread.acrs)); |
| fpregs_load((_s390_fp_regs *) &user_sregs.fpregs, ¤t->thread.fpu); |
| |
| clear_pt_regs_flag(regs, PIF_SYSCALL); /* No longer in a system call */ |
| return 0; |
| } |
| |
| static int save_sigregs_ext32(struct pt_regs *regs, |
| _sigregs_ext32 __user *sregs_ext) |
| { |
| __u32 gprs_high[NUM_GPRS]; |
| __u64 vxrs[__NUM_VXRS_LOW]; |
| int i; |
| |
| /* Save high gprs to signal stack */ |
| for (i = 0; i < NUM_GPRS; i++) |
| gprs_high[i] = regs->gprs[i] >> 32; |
| if (__copy_to_user(&sregs_ext->gprs_high, &gprs_high, |
| sizeof(sregs_ext->gprs_high))) |
| return -EFAULT; |
| |
| /* Save vector registers to signal stack */ |
| if (MACHINE_HAS_VX) { |
| for (i = 0; i < __NUM_VXRS_LOW; i++) |
| vxrs[i] = *((__u64 *)(current->thread.fpu.vxrs + i) + 1); |
| if (__copy_to_user(&sregs_ext->vxrs_low, vxrs, |
| sizeof(sregs_ext->vxrs_low)) || |
| __copy_to_user(&sregs_ext->vxrs_high, |
| current->thread.fpu.vxrs + __NUM_VXRS_LOW, |
| sizeof(sregs_ext->vxrs_high))) |
| return -EFAULT; |
| } |
| return 0; |
| } |
| |
| static int restore_sigregs_ext32(struct pt_regs *regs, |
| _sigregs_ext32 __user *sregs_ext) |
| { |
| __u32 gprs_high[NUM_GPRS]; |
| __u64 vxrs[__NUM_VXRS_LOW]; |
| int i; |
| |
| /* Restore high gprs from signal stack */ |
| if (__copy_from_user(&gprs_high, &sregs_ext->gprs_high, |
| sizeof(sregs_ext->gprs_high))) |
| return -EFAULT; |
| for (i = 0; i < NUM_GPRS; i++) |
| *(__u32 *)®s->gprs[i] = gprs_high[i]; |
| |
| /* Restore vector registers from signal stack */ |
| if (MACHINE_HAS_VX) { |
| if (__copy_from_user(vxrs, &sregs_ext->vxrs_low, |
| sizeof(sregs_ext->vxrs_low)) || |
| __copy_from_user(current->thread.fpu.vxrs + __NUM_VXRS_LOW, |
| &sregs_ext->vxrs_high, |
| sizeof(sregs_ext->vxrs_high))) |
| return -EFAULT; |
| for (i = 0; i < __NUM_VXRS_LOW; i++) |
| *((__u64 *)(current->thread.fpu.vxrs + i) + 1) = vxrs[i]; |
| } |
| return 0; |
| } |
| |
| COMPAT_SYSCALL_DEFINE0(sigreturn) |
| { |
| struct pt_regs *regs = task_pt_regs(current); |
| sigframe32 __user *frame = (sigframe32 __user *)regs->gprs[15]; |
| compat_sigset_t cset; |
| sigset_t set; |
| |
| if (__copy_from_user(&cset.sig, &frame->sc.oldmask, _SIGMASK_COPY_SIZE32)) |
| goto badframe; |
| sigset32_to_sigset(cset.sig, set.sig); |
| set_current_blocked(&set); |
| save_fpu_regs(); |
| if (restore_sigregs32(regs, &frame->sregs)) |
| goto badframe; |
| if (restore_sigregs_ext32(regs, &frame->sregs_ext)) |
| goto badframe; |
| load_sigregs(); |
| return regs->gprs[2]; |
| badframe: |
| force_sig(SIGSEGV, current); |
| return 0; |
| } |
| |
| COMPAT_SYSCALL_DEFINE0(rt_sigreturn) |
| { |
| struct pt_regs *regs = task_pt_regs(current); |
| rt_sigframe32 __user *frame = (rt_sigframe32 __user *)regs->gprs[15]; |
| compat_sigset_t cset; |
| sigset_t set; |
| |
| if (__copy_from_user(&cset, &frame->uc.uc_sigmask, sizeof(cset))) |
| goto badframe; |
| sigset32_to_sigset(cset.sig, set.sig); |
| set_current_blocked(&set); |
| if (compat_restore_altstack(&frame->uc.uc_stack)) |
| goto badframe; |
| save_fpu_regs(); |
| if (restore_sigregs32(regs, &frame->uc.uc_mcontext)) |
| goto badframe; |
| if (restore_sigregs_ext32(regs, &frame->uc.uc_mcontext_ext)) |
| goto badframe; |
| load_sigregs(); |
| return regs->gprs[2]; |
| badframe: |
| force_sig(SIGSEGV, current); |
| return 0; |
| } |
| |
| /* |
| * Set up a signal frame. |
| */ |
| |
| |
| /* |
| * Determine which stack to use.. |
| */ |
| static inline void __user * |
| get_sigframe(struct k_sigaction *ka, struct pt_regs * regs, size_t frame_size) |
| { |
| unsigned long sp; |
| |
| /* Default to using normal stack */ |
| sp = (unsigned long) A(regs->gprs[15]); |
| |
| /* Overflow on alternate signal stack gives SIGSEGV. */ |
| if (on_sig_stack(sp) && !on_sig_stack((sp - frame_size) & -8UL)) |
| return (void __user *) -1UL; |
| |
| /* This is the X/Open sanctioned signal stack switching. */ |
| if (ka->sa.sa_flags & SA_ONSTACK) { |
| if (! sas_ss_flags(sp)) |
| sp = current->sas_ss_sp + current->sas_ss_size; |
| } |
| |
| return (void __user *)((sp - frame_size) & -8ul); |
| } |
| |
| static int setup_frame32(struct ksignal *ksig, sigset_t *set, |
| struct pt_regs *regs) |
| { |
| int sig = ksig->sig; |
| sigframe32 __user *frame; |
| struct sigcontext32 sc; |
| unsigned long restorer; |
| size_t frame_size; |
| |
| /* |
| * gprs_high are always present for 31-bit compat tasks. |
| * The space for vector registers is only allocated if |
| * the machine supports it |
| */ |
| frame_size = sizeof(*frame) - sizeof(frame->sregs_ext.__reserved); |
| if (!MACHINE_HAS_VX) |
| frame_size -= sizeof(frame->sregs_ext.vxrs_low) + |
| sizeof(frame->sregs_ext.vxrs_high); |
| frame = get_sigframe(&ksig->ka, regs, frame_size); |
| if (frame == (void __user *) -1UL) |
| return -EFAULT; |
| |
| /* Set up backchain. */ |
| if (__put_user(regs->gprs[15], (unsigned int __user *) frame)) |
| return -EFAULT; |
| |
| /* Create struct sigcontext32 on the signal stack */ |
| sigset_to_sigset32(set->sig, sc.oldmask); |
| sc.sregs = (__u32)(unsigned long __force) &frame->sregs; |
| if (__copy_to_user(&frame->sc, &sc, sizeof(frame->sc))) |
| return -EFAULT; |
| |
| /* Store registers needed to create the signal frame */ |
| store_sigregs(); |
| |
| /* Create _sigregs32 on the signal stack */ |
| if (save_sigregs32(regs, &frame->sregs)) |
| return -EFAULT; |
| |
| /* Place signal number on stack to allow backtrace from handler. */ |
| if (__put_user(regs->gprs[2], (int __force __user *) &frame->signo)) |
| return -EFAULT; |
| |
| /* Create _sigregs_ext32 on the signal stack */ |
| if (save_sigregs_ext32(regs, &frame->sregs_ext)) |
| return -EFAULT; |
| |
| /* Set up to return from userspace. If provided, use a stub |
| already in userspace. */ |
| if (ksig->ka.sa.sa_flags & SA_RESTORER) { |
| restorer = (unsigned long __force) |
| ksig->ka.sa.sa_restorer | PSW32_ADDR_AMODE; |
| } else { |
| /* Signal frames without vectors registers are short ! */ |
| __u16 __user *svc = (void __user *) frame + frame_size - 2; |
| if (__put_user(S390_SYSCALL_OPCODE | __NR_sigreturn, svc)) |
| return -EFAULT; |
| restorer = (unsigned long __force) svc | PSW32_ADDR_AMODE; |
| } |
| |
| /* Set up registers for signal handler */ |
| regs->gprs[14] = restorer; |
| regs->gprs[15] = (__force __u64) frame; |
| /* Force 31 bit amode and default user address space control. */ |
| regs->psw.mask = PSW_MASK_BA | |
| (PSW_USER_BITS & PSW_MASK_ASC) | |
| (regs->psw.mask & ~PSW_MASK_ASC); |
| regs->psw.addr = (__force __u64) ksig->ka.sa.sa_handler; |
| |
| regs->gprs[2] = sig; |
| regs->gprs[3] = (__force __u64) &frame->sc; |
| |
| /* We forgot to include these in the sigcontext. |
| To avoid breaking binary compatibility, they are passed as args. */ |
| if (sig == SIGSEGV || sig == SIGBUS || sig == SIGILL || |
| sig == SIGTRAP || sig == SIGFPE) { |
| /* set extra registers only for synchronous signals */ |
| regs->gprs[4] = regs->int_code & 127; |
| regs->gprs[5] = regs->int_parm_long; |
| regs->gprs[6] = current->thread.last_break; |
| } |
| |
| return 0; |
| } |
| |
| static int setup_rt_frame32(struct ksignal *ksig, sigset_t *set, |
| struct pt_regs *regs) |
| { |
| compat_sigset_t cset; |
| rt_sigframe32 __user *frame; |
| unsigned long restorer; |
| size_t frame_size; |
| u32 uc_flags; |
| |
| frame_size = sizeof(*frame) - |
| sizeof(frame->uc.uc_mcontext_ext.__reserved); |
| /* |
| * gprs_high are always present for 31-bit compat tasks. |
| * The space for vector registers is only allocated if |
| * the machine supports it |
| */ |
| uc_flags = UC_GPRS_HIGH; |
| if (MACHINE_HAS_VX) { |
| uc_flags |= UC_VXRS; |
| } else |
| frame_size -= sizeof(frame->uc.uc_mcontext_ext.vxrs_low) + |
| sizeof(frame->uc.uc_mcontext_ext.vxrs_high); |
| frame = get_sigframe(&ksig->ka, regs, frame_size); |
| if (frame == (void __user *) -1UL) |
| return -EFAULT; |
| |
| /* Set up backchain. */ |
| if (__put_user(regs->gprs[15], (unsigned int __force __user *) frame)) |
| return -EFAULT; |
| |
| /* Set up to return from userspace. If provided, use a stub |
| already in userspace. */ |
| if (ksig->ka.sa.sa_flags & SA_RESTORER) { |
| restorer = (unsigned long __force) |
| ksig->ka.sa.sa_restorer | PSW32_ADDR_AMODE; |
| } else { |
| __u16 __user *svc = &frame->svc_insn; |
| if (__put_user(S390_SYSCALL_OPCODE | __NR_rt_sigreturn, svc)) |
| return -EFAULT; |
| restorer = (unsigned long __force) svc | PSW32_ADDR_AMODE; |
| } |
| |
| /* Create siginfo on the signal stack */ |
| if (copy_siginfo_to_user32(&frame->info, &ksig->info)) |
| return -EFAULT; |
| |
| /* Store registers needed to create the signal frame */ |
| store_sigregs(); |
| |
| /* Create ucontext on the signal stack. */ |
| sigset_to_sigset32(set->sig, cset.sig); |
| if (__put_user(uc_flags, &frame->uc.uc_flags) || |
| __put_user(0, &frame->uc.uc_link) || |
| __compat_save_altstack(&frame->uc.uc_stack, regs->gprs[15]) || |
| save_sigregs32(regs, &frame->uc.uc_mcontext) || |
| __copy_to_user(&frame->uc.uc_sigmask, &cset, sizeof(cset)) || |
| save_sigregs_ext32(regs, &frame->uc.uc_mcontext_ext)) |
| return -EFAULT; |
| |
| /* Set up registers for signal handler */ |
| regs->gprs[14] = restorer; |
| regs->gprs[15] = (__force __u64) frame; |
| /* Force 31 bit amode and default user address space control. */ |
| regs->psw.mask = PSW_MASK_BA | |
| (PSW_USER_BITS & PSW_MASK_ASC) | |
| (regs->psw.mask & ~PSW_MASK_ASC); |
| regs->psw.addr = (__u64 __force) ksig->ka.sa.sa_handler; |
| |
| regs->gprs[2] = ksig->sig; |
| regs->gprs[3] = (__force __u64) &frame->info; |
| regs->gprs[4] = (__force __u64) &frame->uc; |
| regs->gprs[5] = current->thread.last_break; |
| return 0; |
| } |
| |
| /* |
| * OK, we're invoking a handler |
| */ |
| |
| void handle_signal32(struct ksignal *ksig, sigset_t *oldset, |
| struct pt_regs *regs) |
| { |
| int ret; |
| |
| /* Set up the stack frame */ |
| if (ksig->ka.sa.sa_flags & SA_SIGINFO) |
| ret = setup_rt_frame32(ksig, oldset, regs); |
| else |
| ret = setup_frame32(ksig, oldset, regs); |
| |
| signal_setup_done(ret, ksig, test_thread_flag(TIF_SINGLE_STEP)); |
| } |
| |