| /* |
| * Driver for EIP97 cryptographic accelerator. |
| * |
| * Copyright (c) 2016 Ryder Lee <ryder.lee@mediatek.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/init.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/pm_runtime.h> |
| #include "mtk-platform.h" |
| |
| #define MTK_BURST_SIZE_MSK GENMASK(7, 4) |
| #define MTK_BURST_SIZE(x) ((x) << 4) |
| #define MTK_DESC_SIZE(x) ((x) << 0) |
| #define MTK_DESC_OFFSET(x) ((x) << 16) |
| #define MTK_DESC_FETCH_SIZE(x) ((x) << 0) |
| #define MTK_DESC_FETCH_THRESH(x) ((x) << 16) |
| #define MTK_DESC_OVL_IRQ_EN BIT(25) |
| #define MTK_DESC_ATP_PRESENT BIT(30) |
| |
| #define MTK_DFSE_IDLE GENMASK(3, 0) |
| #define MTK_DFSE_THR_CTRL_EN BIT(30) |
| #define MTK_DFSE_THR_CTRL_RESET BIT(31) |
| #define MTK_DFSE_RING_ID(x) (((x) >> 12) & GENMASK(3, 0)) |
| #define MTK_DFSE_MIN_DATA(x) ((x) << 0) |
| #define MTK_DFSE_MAX_DATA(x) ((x) << 8) |
| #define MTK_DFE_MIN_CTRL(x) ((x) << 16) |
| #define MTK_DFE_MAX_CTRL(x) ((x) << 24) |
| |
| #define MTK_IN_BUF_MIN_THRESH(x) ((x) << 8) |
| #define MTK_IN_BUF_MAX_THRESH(x) ((x) << 12) |
| #define MTK_OUT_BUF_MIN_THRESH(x) ((x) << 0) |
| #define MTK_OUT_BUF_MAX_THRESH(x) ((x) << 4) |
| #define MTK_IN_TBUF_SIZE(x) (((x) >> 4) & GENMASK(3, 0)) |
| #define MTK_IN_DBUF_SIZE(x) (((x) >> 8) & GENMASK(3, 0)) |
| #define MTK_OUT_DBUF_SIZE(x) (((x) >> 16) & GENMASK(3, 0)) |
| #define MTK_CMD_FIFO_SIZE(x) (((x) >> 8) & GENMASK(3, 0)) |
| #define MTK_RES_FIFO_SIZE(x) (((x) >> 12) & GENMASK(3, 0)) |
| |
| #define MTK_PE_TK_LOC_AVL BIT(2) |
| #define MTK_PE_PROC_HELD BIT(14) |
| #define MTK_PE_TK_TIMEOUT_EN BIT(22) |
| #define MTK_PE_INPUT_DMA_ERR BIT(0) |
| #define MTK_PE_OUTPUT_DMA_ERR BIT(1) |
| #define MTK_PE_PKT_PORC_ERR BIT(2) |
| #define MTK_PE_PKT_TIMEOUT BIT(3) |
| #define MTK_PE_FATAL_ERR BIT(14) |
| #define MTK_PE_INPUT_DMA_ERR_EN BIT(16) |
| #define MTK_PE_OUTPUT_DMA_ERR_EN BIT(17) |
| #define MTK_PE_PKT_PORC_ERR_EN BIT(18) |
| #define MTK_PE_PKT_TIMEOUT_EN BIT(19) |
| #define MTK_PE_FATAL_ERR_EN BIT(30) |
| #define MTK_PE_INT_OUT_EN BIT(31) |
| |
| #define MTK_HIA_SIGNATURE ((u16)0x35ca) |
| #define MTK_HIA_DATA_WIDTH(x) (((x) >> 25) & GENMASK(1, 0)) |
| #define MTK_HIA_DMA_LENGTH(x) (((x) >> 20) & GENMASK(4, 0)) |
| #define MTK_CDR_STAT_CLR GENMASK(4, 0) |
| #define MTK_RDR_STAT_CLR GENMASK(7, 0) |
| |
| #define MTK_AIC_INT_MSK GENMASK(5, 0) |
| #define MTK_AIC_VER_MSK (GENMASK(15, 0) | GENMASK(27, 20)) |
| #define MTK_AIC_VER11 0x011036c9 |
| #define MTK_AIC_VER12 0x012036c9 |
| #define MTK_AIC_G_CLR GENMASK(30, 20) |
| |
| /** |
| * EIP97 is an integrated security subsystem to accelerate cryptographic |
| * functions and protocols to offload the host processor. |
| * Some important hardware modules are briefly introduced below: |
| * |
| * Host Interface Adapter(HIA) - the main interface between the host |
| * system and the hardware subsystem. It is responsible for attaching |
| * processing engine to the specific host bus interface and provides a |
| * standardized software view for off loading tasks to the engine. |
| * |
| * Command Descriptor Ring Manager(CDR Manager) - keeps track of how many |
| * CD the host has prepared in the CDR. It monitors the fill level of its |
| * CD-FIFO and if there's sufficient space for the next block of descriptors, |
| * then it fires off a DMA request to fetch a block of CDs. |
| * |
| * Data fetch engine(DFE) - It is responsible for parsing the CD and |
| * setting up the required control and packet data DMA transfers from |
| * system memory to the processing engine. |
| * |
| * Result Descriptor Ring Manager(RDR Manager) - same as CDR Manager, |
| * but target is result descriptors, Moreover, it also handles the RD |
| * updates under control of the DSE. For each packet data segment |
| * processed, the DSE triggers the RDR Manager to write the updated RD. |
| * If triggered to update, the RDR Manager sets up a DMA operation to |
| * copy the RD from the DSE to the correct location in the RDR. |
| * |
| * Data Store Engine(DSE) - It is responsible for parsing the prepared RD |
| * and setting up the required control and packet data DMA transfers from |
| * the processing engine to system memory. |
| * |
| * Advanced Interrupt Controllers(AICs) - receive interrupt request signals |
| * from various sources and combine them into one interrupt output. |
| * The AICs are used by: |
| * - One for the HIA global and processing engine interrupts. |
| * - The others for the descriptor ring interrupts. |
| */ |
| |
| /* Cryptographic engine capabilities */ |
| struct mtk_sys_cap { |
| /* host interface adapter */ |
| u32 hia_ver; |
| u32 hia_opt; |
| /* packet engine */ |
| u32 pkt_eng_opt; |
| /* global hardware */ |
| u32 hw_opt; |
| }; |
| |
| static void mtk_desc_ring_link(struct mtk_cryp *cryp, u32 mask) |
| { |
| /* Assign rings to DFE/DSE thread and enable it */ |
| writel(MTK_DFSE_THR_CTRL_EN | mask, cryp->base + DFE_THR_CTRL); |
| writel(MTK_DFSE_THR_CTRL_EN | mask, cryp->base + DSE_THR_CTRL); |
| } |
| |
| static void mtk_dfe_dse_buf_setup(struct mtk_cryp *cryp, |
| struct mtk_sys_cap *cap) |
| { |
| u32 width = MTK_HIA_DATA_WIDTH(cap->hia_opt) + 2; |
| u32 len = MTK_HIA_DMA_LENGTH(cap->hia_opt) - 1; |
| u32 ipbuf = min((u32)MTK_IN_DBUF_SIZE(cap->hw_opt) + width, len); |
| u32 opbuf = min((u32)MTK_OUT_DBUF_SIZE(cap->hw_opt) + width, len); |
| u32 itbuf = min((u32)MTK_IN_TBUF_SIZE(cap->hw_opt) + width, len); |
| |
| writel(MTK_DFSE_MIN_DATA(ipbuf - 1) | |
| MTK_DFSE_MAX_DATA(ipbuf) | |
| MTK_DFE_MIN_CTRL(itbuf - 1) | |
| MTK_DFE_MAX_CTRL(itbuf), |
| cryp->base + DFE_CFG); |
| |
| writel(MTK_DFSE_MIN_DATA(opbuf - 1) | |
| MTK_DFSE_MAX_DATA(opbuf), |
| cryp->base + DSE_CFG); |
| |
| writel(MTK_IN_BUF_MIN_THRESH(ipbuf - 1) | |
| MTK_IN_BUF_MAX_THRESH(ipbuf), |
| cryp->base + PE_IN_DBUF_THRESH); |
| |
| writel(MTK_IN_BUF_MIN_THRESH(itbuf - 1) | |
| MTK_IN_BUF_MAX_THRESH(itbuf), |
| cryp->base + PE_IN_TBUF_THRESH); |
| |
| writel(MTK_OUT_BUF_MIN_THRESH(opbuf - 1) | |
| MTK_OUT_BUF_MAX_THRESH(opbuf), |
| cryp->base + PE_OUT_DBUF_THRESH); |
| |
| writel(0, cryp->base + PE_OUT_TBUF_THRESH); |
| writel(0, cryp->base + PE_OUT_BUF_CTRL); |
| } |
| |
| static int mtk_dfe_dse_state_check(struct mtk_cryp *cryp) |
| { |
| int ret = -EINVAL; |
| u32 val; |
| |
| /* Check for completion of all DMA transfers */ |
| val = readl(cryp->base + DFE_THR_STAT); |
| if (MTK_DFSE_RING_ID(val) == MTK_DFSE_IDLE) { |
| val = readl(cryp->base + DSE_THR_STAT); |
| if (MTK_DFSE_RING_ID(val) == MTK_DFSE_IDLE) |
| ret = 0; |
| } |
| |
| if (!ret) { |
| /* Take DFE/DSE thread out of reset */ |
| writel(0, cryp->base + DFE_THR_CTRL); |
| writel(0, cryp->base + DSE_THR_CTRL); |
| } else { |
| return -EBUSY; |
| } |
| |
| return 0; |
| } |
| |
| static int mtk_dfe_dse_reset(struct mtk_cryp *cryp) |
| { |
| int err; |
| |
| /* Reset DSE/DFE and correct system priorities for all rings. */ |
| writel(MTK_DFSE_THR_CTRL_RESET, cryp->base + DFE_THR_CTRL); |
| writel(0, cryp->base + DFE_PRIO_0); |
| writel(0, cryp->base + DFE_PRIO_1); |
| writel(0, cryp->base + DFE_PRIO_2); |
| writel(0, cryp->base + DFE_PRIO_3); |
| |
| writel(MTK_DFSE_THR_CTRL_RESET, cryp->base + DSE_THR_CTRL); |
| writel(0, cryp->base + DSE_PRIO_0); |
| writel(0, cryp->base + DSE_PRIO_1); |
| writel(0, cryp->base + DSE_PRIO_2); |
| writel(0, cryp->base + DSE_PRIO_3); |
| |
| err = mtk_dfe_dse_state_check(cryp); |
| if (err) |
| return err; |
| |
| return 0; |
| } |
| |
| static void mtk_cmd_desc_ring_setup(struct mtk_cryp *cryp, |
| int i, struct mtk_sys_cap *cap) |
| { |
| /* Full descriptor that fits FIFO minus one */ |
| u32 count = |
| ((1 << MTK_CMD_FIFO_SIZE(cap->hia_opt)) / MTK_DESC_SZ) - 1; |
| |
| /* Temporarily disable external triggering */ |
| writel(0, cryp->base + CDR_CFG(i)); |
| |
| /* Clear CDR count */ |
| writel(MTK_CNT_RST, cryp->base + CDR_PREP_COUNT(i)); |
| writel(MTK_CNT_RST, cryp->base + CDR_PROC_COUNT(i)); |
| |
| writel(0, cryp->base + CDR_PREP_PNTR(i)); |
| writel(0, cryp->base + CDR_PROC_PNTR(i)); |
| writel(0, cryp->base + CDR_DMA_CFG(i)); |
| |
| /* Configure CDR host address space */ |
| writel(0, cryp->base + CDR_BASE_ADDR_HI(i)); |
| writel(cryp->ring[i]->cmd_dma, cryp->base + CDR_BASE_ADDR_LO(i)); |
| |
| writel(MTK_DESC_RING_SZ, cryp->base + CDR_RING_SIZE(i)); |
| |
| /* Clear and disable all CDR interrupts */ |
| writel(MTK_CDR_STAT_CLR, cryp->base + CDR_STAT(i)); |
| |
| /* |
| * Set command descriptor offset and enable additional |
| * token present in descriptor. |
| */ |
| writel(MTK_DESC_SIZE(MTK_DESC_SZ) | |
| MTK_DESC_OFFSET(MTK_DESC_OFF) | |
| MTK_DESC_ATP_PRESENT, |
| cryp->base + CDR_DESC_SIZE(i)); |
| |
| writel(MTK_DESC_FETCH_SIZE(count * MTK_DESC_OFF) | |
| MTK_DESC_FETCH_THRESH(count * MTK_DESC_SZ), |
| cryp->base + CDR_CFG(i)); |
| } |
| |
| static void mtk_res_desc_ring_setup(struct mtk_cryp *cryp, |
| int i, struct mtk_sys_cap *cap) |
| { |
| u32 rndup = 2; |
| u32 count = ((1 << MTK_RES_FIFO_SIZE(cap->hia_opt)) / rndup) - 1; |
| |
| /* Temporarily disable external triggering */ |
| writel(0, cryp->base + RDR_CFG(i)); |
| |
| /* Clear RDR count */ |
| writel(MTK_CNT_RST, cryp->base + RDR_PREP_COUNT(i)); |
| writel(MTK_CNT_RST, cryp->base + RDR_PROC_COUNT(i)); |
| |
| writel(0, cryp->base + RDR_PREP_PNTR(i)); |
| writel(0, cryp->base + RDR_PROC_PNTR(i)); |
| writel(0, cryp->base + RDR_DMA_CFG(i)); |
| |
| /* Configure RDR host address space */ |
| writel(0, cryp->base + RDR_BASE_ADDR_HI(i)); |
| writel(cryp->ring[i]->res_dma, cryp->base + RDR_BASE_ADDR_LO(i)); |
| |
| writel(MTK_DESC_RING_SZ, cryp->base + RDR_RING_SIZE(i)); |
| writel(MTK_RDR_STAT_CLR, cryp->base + RDR_STAT(i)); |
| |
| /* |
| * RDR manager generates update interrupts on a per-completed-packet, |
| * and the rd_proc_thresh_irq interrupt is fired when proc_pkt_count |
| * for the RDR exceeds the number of packets. |
| */ |
| writel(MTK_RDR_PROC_THRESH | MTK_RDR_PROC_MODE, |
| cryp->base + RDR_THRESH(i)); |
| |
| /* |
| * Configure a threshold and time-out value for the processed |
| * result descriptors (or complete packets) that are written to |
| * the RDR. |
| */ |
| writel(MTK_DESC_SIZE(MTK_DESC_SZ) | MTK_DESC_OFFSET(MTK_DESC_OFF), |
| cryp->base + RDR_DESC_SIZE(i)); |
| |
| /* |
| * Configure HIA fetch size and fetch threshold that are used to |
| * fetch blocks of multiple descriptors. |
| */ |
| writel(MTK_DESC_FETCH_SIZE(count * MTK_DESC_OFF) | |
| MTK_DESC_FETCH_THRESH(count * rndup) | |
| MTK_DESC_OVL_IRQ_EN, |
| cryp->base + RDR_CFG(i)); |
| } |
| |
| static int mtk_packet_engine_setup(struct mtk_cryp *cryp) |
| { |
| struct mtk_sys_cap cap; |
| int i, err; |
| u32 val; |
| |
| cap.hia_ver = readl(cryp->base + HIA_VERSION); |
| cap.hia_opt = readl(cryp->base + HIA_OPTIONS); |
| cap.hw_opt = readl(cryp->base + EIP97_OPTIONS); |
| |
| if (!(((u16)cap.hia_ver) == MTK_HIA_SIGNATURE)) |
| return -EINVAL; |
| |
| /* Configure endianness conversion method for master (DMA) interface */ |
| writel(0, cryp->base + EIP97_MST_CTRL); |
| |
| /* Set HIA burst size */ |
| val = readl(cryp->base + HIA_MST_CTRL); |
| val &= ~MTK_BURST_SIZE_MSK; |
| val |= MTK_BURST_SIZE(5); |
| writel(val, cryp->base + HIA_MST_CTRL); |
| |
| err = mtk_dfe_dse_reset(cryp); |
| if (err) { |
| dev_err(cryp->dev, "Failed to reset DFE and DSE.\n"); |
| return err; |
| } |
| |
| mtk_dfe_dse_buf_setup(cryp, &cap); |
| |
| /* Enable the 4 rings for the packet engines. */ |
| mtk_desc_ring_link(cryp, 0xf); |
| |
| for (i = 0; i < MTK_RING_MAX; i++) { |
| mtk_cmd_desc_ring_setup(cryp, i, &cap); |
| mtk_res_desc_ring_setup(cryp, i, &cap); |
| } |
| |
| writel(MTK_PE_TK_LOC_AVL | MTK_PE_PROC_HELD | MTK_PE_TK_TIMEOUT_EN, |
| cryp->base + PE_TOKEN_CTRL_STAT); |
| |
| /* Clear all pending interrupts */ |
| writel(MTK_AIC_G_CLR, cryp->base + AIC_G_ACK); |
| writel(MTK_PE_INPUT_DMA_ERR | MTK_PE_OUTPUT_DMA_ERR | |
| MTK_PE_PKT_PORC_ERR | MTK_PE_PKT_TIMEOUT | |
| MTK_PE_FATAL_ERR | MTK_PE_INPUT_DMA_ERR_EN | |
| MTK_PE_OUTPUT_DMA_ERR_EN | MTK_PE_PKT_PORC_ERR_EN | |
| MTK_PE_PKT_TIMEOUT_EN | MTK_PE_FATAL_ERR_EN | |
| MTK_PE_INT_OUT_EN, |
| cryp->base + PE_INTERRUPT_CTRL_STAT); |
| |
| return 0; |
| } |
| |
| static int mtk_aic_cap_check(struct mtk_cryp *cryp, int hw) |
| { |
| u32 val; |
| |
| if (hw == MTK_RING_MAX) |
| val = readl(cryp->base + AIC_G_VERSION); |
| else |
| val = readl(cryp->base + AIC_VERSION(hw)); |
| |
| val &= MTK_AIC_VER_MSK; |
| if (val != MTK_AIC_VER11 && val != MTK_AIC_VER12) |
| return -ENXIO; |
| |
| if (hw == MTK_RING_MAX) |
| val = readl(cryp->base + AIC_G_OPTIONS); |
| else |
| val = readl(cryp->base + AIC_OPTIONS(hw)); |
| |
| val &= MTK_AIC_INT_MSK; |
| if (!val || val > 32) |
| return -ENXIO; |
| |
| return 0; |
| } |
| |
| static int mtk_aic_init(struct mtk_cryp *cryp, int hw) |
| { |
| int err; |
| |
| err = mtk_aic_cap_check(cryp, hw); |
| if (err) |
| return err; |
| |
| /* Disable all interrupts and set initial configuration */ |
| if (hw == MTK_RING_MAX) { |
| writel(0, cryp->base + AIC_G_ENABLE_CTRL); |
| writel(0, cryp->base + AIC_G_POL_CTRL); |
| writel(0, cryp->base + AIC_G_TYPE_CTRL); |
| writel(0, cryp->base + AIC_G_ENABLE_SET); |
| } else { |
| writel(0, cryp->base + AIC_ENABLE_CTRL(hw)); |
| writel(0, cryp->base + AIC_POL_CTRL(hw)); |
| writel(0, cryp->base + AIC_TYPE_CTRL(hw)); |
| writel(0, cryp->base + AIC_ENABLE_SET(hw)); |
| } |
| |
| return 0; |
| } |
| |
| static int mtk_accelerator_init(struct mtk_cryp *cryp) |
| { |
| int i, err; |
| |
| /* Initialize advanced interrupt controller(AIC) */ |
| for (i = 0; i < MTK_IRQ_NUM; i++) { |
| err = mtk_aic_init(cryp, i); |
| if (err) { |
| dev_err(cryp->dev, "Failed to initialize AIC.\n"); |
| return err; |
| } |
| } |
| |
| /* Initialize packet engine */ |
| err = mtk_packet_engine_setup(cryp); |
| if (err) { |
| dev_err(cryp->dev, "Failed to configure packet engine.\n"); |
| return err; |
| } |
| |
| return 0; |
| } |
| |
| static void mtk_desc_dma_free(struct mtk_cryp *cryp) |
| { |
| int i; |
| |
| for (i = 0; i < MTK_RING_MAX; i++) { |
| dma_free_coherent(cryp->dev, MTK_DESC_RING_SZ, |
| cryp->ring[i]->res_base, |
| cryp->ring[i]->res_dma); |
| dma_free_coherent(cryp->dev, MTK_DESC_RING_SZ, |
| cryp->ring[i]->cmd_base, |
| cryp->ring[i]->cmd_dma); |
| kfree(cryp->ring[i]); |
| } |
| } |
| |
| static int mtk_desc_ring_alloc(struct mtk_cryp *cryp) |
| { |
| struct mtk_ring **ring = cryp->ring; |
| int i, err = ENOMEM; |
| |
| for (i = 0; i < MTK_RING_MAX; i++) { |
| ring[i] = kzalloc(sizeof(**ring), GFP_KERNEL); |
| if (!ring[i]) |
| goto err_cleanup; |
| |
| ring[i]->cmd_base = dma_zalloc_coherent(cryp->dev, |
| MTK_DESC_RING_SZ, |
| &ring[i]->cmd_dma, |
| GFP_KERNEL); |
| if (!ring[i]->cmd_base) |
| goto err_cleanup; |
| |
| ring[i]->res_base = dma_zalloc_coherent(cryp->dev, |
| MTK_DESC_RING_SZ, |
| &ring[i]->res_dma, |
| GFP_KERNEL); |
| if (!ring[i]->res_base) |
| goto err_cleanup; |
| |
| ring[i]->cmd_next = ring[i]->cmd_base; |
| ring[i]->res_next = ring[i]->res_base; |
| } |
| return 0; |
| |
| err_cleanup: |
| for (; i--; ) { |
| dma_free_coherent(cryp->dev, MTK_DESC_RING_SZ, |
| ring[i]->res_base, ring[i]->res_dma); |
| dma_free_coherent(cryp->dev, MTK_DESC_RING_SZ, |
| ring[i]->cmd_base, ring[i]->cmd_dma); |
| kfree(ring[i]); |
| } |
| return err; |
| } |
| |
| static int mtk_crypto_probe(struct platform_device *pdev) |
| { |
| struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| struct mtk_cryp *cryp; |
| int i, err; |
| |
| cryp = devm_kzalloc(&pdev->dev, sizeof(*cryp), GFP_KERNEL); |
| if (!cryp) |
| return -ENOMEM; |
| |
| cryp->base = devm_ioremap_resource(&pdev->dev, res); |
| if (IS_ERR(cryp->base)) |
| return PTR_ERR(cryp->base); |
| |
| for (i = 0; i < MTK_IRQ_NUM; i++) { |
| cryp->irq[i] = platform_get_irq(pdev, i); |
| if (cryp->irq[i] < 0) { |
| dev_err(cryp->dev, "no IRQ:%d resource info\n", i); |
| return cryp->irq[i]; |
| } |
| } |
| |
| cryp->clk_cryp = devm_clk_get(&pdev->dev, "cryp"); |
| if (IS_ERR(cryp->clk_cryp)) |
| return -EPROBE_DEFER; |
| |
| cryp->dev = &pdev->dev; |
| pm_runtime_enable(cryp->dev); |
| pm_runtime_get_sync(cryp->dev); |
| |
| err = clk_prepare_enable(cryp->clk_cryp); |
| if (err) |
| goto err_clk_cryp; |
| |
| /* Allocate four command/result descriptor rings */ |
| err = mtk_desc_ring_alloc(cryp); |
| if (err) { |
| dev_err(cryp->dev, "Unable to allocate descriptor rings.\n"); |
| goto err_resource; |
| } |
| |
| /* Initialize hardware modules */ |
| err = mtk_accelerator_init(cryp); |
| if (err) { |
| dev_err(cryp->dev, "Failed to initialize cryptographic engine.\n"); |
| goto err_engine; |
| } |
| |
| err = mtk_cipher_alg_register(cryp); |
| if (err) { |
| dev_err(cryp->dev, "Unable to register cipher algorithm.\n"); |
| goto err_cipher; |
| } |
| |
| err = mtk_hash_alg_register(cryp); |
| if (err) { |
| dev_err(cryp->dev, "Unable to register hash algorithm.\n"); |
| goto err_hash; |
| } |
| |
| platform_set_drvdata(pdev, cryp); |
| return 0; |
| |
| err_hash: |
| mtk_cipher_alg_release(cryp); |
| err_cipher: |
| mtk_dfe_dse_reset(cryp); |
| err_engine: |
| mtk_desc_dma_free(cryp); |
| err_resource: |
| clk_disable_unprepare(cryp->clk_cryp); |
| err_clk_cryp: |
| pm_runtime_put_sync(cryp->dev); |
| pm_runtime_disable(cryp->dev); |
| |
| return err; |
| } |
| |
| static int mtk_crypto_remove(struct platform_device *pdev) |
| { |
| struct mtk_cryp *cryp = platform_get_drvdata(pdev); |
| |
| mtk_hash_alg_release(cryp); |
| mtk_cipher_alg_release(cryp); |
| mtk_desc_dma_free(cryp); |
| |
| clk_disable_unprepare(cryp->clk_cryp); |
| |
| pm_runtime_put_sync(cryp->dev); |
| pm_runtime_disable(cryp->dev); |
| platform_set_drvdata(pdev, NULL); |
| |
| return 0; |
| } |
| |
| static const struct of_device_id of_crypto_id[] = { |
| { .compatible = "mediatek,eip97-crypto" }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, of_crypto_id); |
| |
| static struct platform_driver mtk_crypto_driver = { |
| .probe = mtk_crypto_probe, |
| .remove = mtk_crypto_remove, |
| .driver = { |
| .name = "mtk-crypto", |
| .of_match_table = of_crypto_id, |
| }, |
| }; |
| module_platform_driver(mtk_crypto_driver); |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_AUTHOR("Ryder Lee <ryder.lee@mediatek.com>"); |
| MODULE_DESCRIPTION("Cryptographic accelerator driver for EIP97"); |