|  | /* | 
|  | * TI DaVinci GPIO Support | 
|  | * | 
|  | * Copyright (c) 2006-2007 David Brownell | 
|  | * Copyright (c) 2007, MontaVista Software, Inc. <source@mvista.com> | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License as published by | 
|  | * the Free Software Foundation; either version 2 of the License, or | 
|  | * (at your option) any later version. | 
|  | */ | 
|  | #include <linux/gpio.h> | 
|  | #include <linux/errno.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/clk.h> | 
|  | #include <linux/err.h> | 
|  | #include <linux/io.h> | 
|  | #include <linux/irq.h> | 
|  | #include <linux/irqdomain.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/of.h> | 
|  | #include <linux/of_device.h> | 
|  | #include <linux/platform_device.h> | 
|  | #include <linux/platform_data/gpio-davinci.h> | 
|  | #include <linux/irqchip/chained_irq.h> | 
|  |  | 
|  | struct davinci_gpio_regs { | 
|  | u32	dir; | 
|  | u32	out_data; | 
|  | u32	set_data; | 
|  | u32	clr_data; | 
|  | u32	in_data; | 
|  | u32	set_rising; | 
|  | u32	clr_rising; | 
|  | u32	set_falling; | 
|  | u32	clr_falling; | 
|  | u32	intstat; | 
|  | }; | 
|  |  | 
|  | typedef struct irq_chip *(*gpio_get_irq_chip_cb_t)(unsigned int irq); | 
|  |  | 
|  | #define BINTEN	0x8 /* GPIO Interrupt Per-Bank Enable Register */ | 
|  |  | 
|  | static void __iomem *gpio_base; | 
|  |  | 
|  | static struct davinci_gpio_regs __iomem *gpio2regs(unsigned gpio) | 
|  | { | 
|  | void __iomem *ptr; | 
|  |  | 
|  | if (gpio < 32 * 1) | 
|  | ptr = gpio_base + 0x10; | 
|  | else if (gpio < 32 * 2) | 
|  | ptr = gpio_base + 0x38; | 
|  | else if (gpio < 32 * 3) | 
|  | ptr = gpio_base + 0x60; | 
|  | else if (gpio < 32 * 4) | 
|  | ptr = gpio_base + 0x88; | 
|  | else if (gpio < 32 * 5) | 
|  | ptr = gpio_base + 0xb0; | 
|  | else | 
|  | ptr = NULL; | 
|  | return ptr; | 
|  | } | 
|  |  | 
|  | static inline struct davinci_gpio_regs __iomem *irq2regs(struct irq_data *d) | 
|  | { | 
|  | struct davinci_gpio_regs __iomem *g; | 
|  |  | 
|  | g = (__force struct davinci_gpio_regs __iomem *)irq_data_get_irq_chip_data(d); | 
|  |  | 
|  | return g; | 
|  | } | 
|  |  | 
|  | static int davinci_gpio_irq_setup(struct platform_device *pdev); | 
|  |  | 
|  | /*--------------------------------------------------------------------------*/ | 
|  |  | 
|  | /* board setup code *MUST* setup pinmux and enable the GPIO clock. */ | 
|  | static inline int __davinci_direction(struct gpio_chip *chip, | 
|  | unsigned offset, bool out, int value) | 
|  | { | 
|  | struct davinci_gpio_controller *d = gpiochip_get_data(chip); | 
|  | struct davinci_gpio_regs __iomem *g = d->regs; | 
|  | unsigned long flags; | 
|  | u32 temp; | 
|  | u32 mask = 1 << offset; | 
|  |  | 
|  | spin_lock_irqsave(&d->lock, flags); | 
|  | temp = readl_relaxed(&g->dir); | 
|  | if (out) { | 
|  | temp &= ~mask; | 
|  | writel_relaxed(mask, value ? &g->set_data : &g->clr_data); | 
|  | } else { | 
|  | temp |= mask; | 
|  | } | 
|  | writel_relaxed(temp, &g->dir); | 
|  | spin_unlock_irqrestore(&d->lock, flags); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int davinci_direction_in(struct gpio_chip *chip, unsigned offset) | 
|  | { | 
|  | return __davinci_direction(chip, offset, false, 0); | 
|  | } | 
|  |  | 
|  | static int | 
|  | davinci_direction_out(struct gpio_chip *chip, unsigned offset, int value) | 
|  | { | 
|  | return __davinci_direction(chip, offset, true, value); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Read the pin's value (works even if it's set up as output); | 
|  | * returns zero/nonzero. | 
|  | * | 
|  | * Note that changes are synched to the GPIO clock, so reading values back | 
|  | * right after you've set them may give old values. | 
|  | */ | 
|  | static int davinci_gpio_get(struct gpio_chip *chip, unsigned offset) | 
|  | { | 
|  | struct davinci_gpio_controller *d = gpiochip_get_data(chip); | 
|  | struct davinci_gpio_regs __iomem *g = d->regs; | 
|  |  | 
|  | return !!((1 << offset) & readl_relaxed(&g->in_data)); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Assuming the pin is muxed as a gpio output, set its output value. | 
|  | */ | 
|  | static void | 
|  | davinci_gpio_set(struct gpio_chip *chip, unsigned offset, int value) | 
|  | { | 
|  | struct davinci_gpio_controller *d = gpiochip_get_data(chip); | 
|  | struct davinci_gpio_regs __iomem *g = d->regs; | 
|  |  | 
|  | writel_relaxed((1 << offset), value ? &g->set_data : &g->clr_data); | 
|  | } | 
|  |  | 
|  | static struct davinci_gpio_platform_data * | 
|  | davinci_gpio_get_pdata(struct platform_device *pdev) | 
|  | { | 
|  | struct device_node *dn = pdev->dev.of_node; | 
|  | struct davinci_gpio_platform_data *pdata; | 
|  | int ret; | 
|  | u32 val; | 
|  |  | 
|  | if (!IS_ENABLED(CONFIG_OF) || !pdev->dev.of_node) | 
|  | return dev_get_platdata(&pdev->dev); | 
|  |  | 
|  | pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); | 
|  | if (!pdata) | 
|  | return NULL; | 
|  |  | 
|  | ret = of_property_read_u32(dn, "ti,ngpio", &val); | 
|  | if (ret) | 
|  | goto of_err; | 
|  |  | 
|  | pdata->ngpio = val; | 
|  |  | 
|  | ret = of_property_read_u32(dn, "ti,davinci-gpio-unbanked", &val); | 
|  | if (ret) | 
|  | goto of_err; | 
|  |  | 
|  | pdata->gpio_unbanked = val; | 
|  |  | 
|  | return pdata; | 
|  |  | 
|  | of_err: | 
|  | dev_err(&pdev->dev, "Populating pdata from DT failed: err %d\n", ret); | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_OF_GPIO | 
|  | static int davinci_gpio_of_xlate(struct gpio_chip *gc, | 
|  | const struct of_phandle_args *gpiospec, | 
|  | u32 *flags) | 
|  | { | 
|  | struct davinci_gpio_controller *chips = dev_get_drvdata(gc->parent); | 
|  | struct davinci_gpio_platform_data *pdata = dev_get_platdata(gc->parent); | 
|  |  | 
|  | if (gpiospec->args[0] > pdata->ngpio) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (gc != &chips[gpiospec->args[0] / 32].chip) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (flags) | 
|  | *flags = gpiospec->args[1]; | 
|  |  | 
|  | return gpiospec->args[0] % 32; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | static int davinci_gpio_probe(struct platform_device *pdev) | 
|  | { | 
|  | int i, base; | 
|  | unsigned ngpio, nbank; | 
|  | struct davinci_gpio_controller *chips; | 
|  | struct davinci_gpio_platform_data *pdata; | 
|  | struct davinci_gpio_regs __iomem *regs; | 
|  | struct device *dev = &pdev->dev; | 
|  | struct resource *res; | 
|  |  | 
|  | pdata = davinci_gpio_get_pdata(pdev); | 
|  | if (!pdata) { | 
|  | dev_err(dev, "No platform data found\n"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | dev->platform_data = pdata; | 
|  |  | 
|  | /* | 
|  | * The gpio banks conceptually expose a segmented bitmap, | 
|  | * and "ngpio" is one more than the largest zero-based | 
|  | * bit index that's valid. | 
|  | */ | 
|  | ngpio = pdata->ngpio; | 
|  | if (ngpio == 0) { | 
|  | dev_err(dev, "How many GPIOs?\n"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | if (WARN_ON(ARCH_NR_GPIOS < ngpio)) | 
|  | ngpio = ARCH_NR_GPIOS; | 
|  |  | 
|  | nbank = DIV_ROUND_UP(ngpio, 32); | 
|  | chips = devm_kzalloc(dev, | 
|  | nbank * sizeof(struct davinci_gpio_controller), | 
|  | GFP_KERNEL); | 
|  | if (!chips) | 
|  | return -ENOMEM; | 
|  |  | 
|  | res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | 
|  | gpio_base = devm_ioremap_resource(dev, res); | 
|  | if (IS_ERR(gpio_base)) | 
|  | return PTR_ERR(gpio_base); | 
|  |  | 
|  | for (i = 0, base = 0; base < ngpio; i++, base += 32) { | 
|  | chips[i].chip.label = "DaVinci"; | 
|  |  | 
|  | chips[i].chip.direction_input = davinci_direction_in; | 
|  | chips[i].chip.get = davinci_gpio_get; | 
|  | chips[i].chip.direction_output = davinci_direction_out; | 
|  | chips[i].chip.set = davinci_gpio_set; | 
|  |  | 
|  | chips[i].chip.base = base; | 
|  | chips[i].chip.ngpio = ngpio - base; | 
|  | if (chips[i].chip.ngpio > 32) | 
|  | chips[i].chip.ngpio = 32; | 
|  |  | 
|  | #ifdef CONFIG_OF_GPIO | 
|  | chips[i].chip.of_gpio_n_cells = 2; | 
|  | chips[i].chip.of_xlate = davinci_gpio_of_xlate; | 
|  | chips[i].chip.parent = dev; | 
|  | chips[i].chip.of_node = dev->of_node; | 
|  | #endif | 
|  | spin_lock_init(&chips[i].lock); | 
|  |  | 
|  | regs = gpio2regs(base); | 
|  | if (!regs) | 
|  | return -ENXIO; | 
|  | chips[i].regs = regs; | 
|  | chips[i].set_data = ®s->set_data; | 
|  | chips[i].clr_data = ®s->clr_data; | 
|  | chips[i].in_data = ®s->in_data; | 
|  |  | 
|  | gpiochip_add_data(&chips[i].chip, &chips[i]); | 
|  | } | 
|  |  | 
|  | platform_set_drvdata(pdev, chips); | 
|  | davinci_gpio_irq_setup(pdev); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /*--------------------------------------------------------------------------*/ | 
|  | /* | 
|  | * We expect irqs will normally be set up as input pins, but they can also be | 
|  | * used as output pins ... which is convenient for testing. | 
|  | * | 
|  | * NOTE:  The first few GPIOs also have direct INTC hookups in addition | 
|  | * to their GPIOBNK0 irq, with a bit less overhead. | 
|  | * | 
|  | * All those INTC hookups (direct, plus several IRQ banks) can also | 
|  | * serve as EDMA event triggers. | 
|  | */ | 
|  |  | 
|  | static void gpio_irq_disable(struct irq_data *d) | 
|  | { | 
|  | struct davinci_gpio_regs __iomem *g = irq2regs(d); | 
|  | u32 mask = (u32) irq_data_get_irq_handler_data(d); | 
|  |  | 
|  | writel_relaxed(mask, &g->clr_falling); | 
|  | writel_relaxed(mask, &g->clr_rising); | 
|  | } | 
|  |  | 
|  | static void gpio_irq_enable(struct irq_data *d) | 
|  | { | 
|  | struct davinci_gpio_regs __iomem *g = irq2regs(d); | 
|  | u32 mask = (u32) irq_data_get_irq_handler_data(d); | 
|  | unsigned status = irqd_get_trigger_type(d); | 
|  |  | 
|  | status &= IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING; | 
|  | if (!status) | 
|  | status = IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING; | 
|  |  | 
|  | if (status & IRQ_TYPE_EDGE_FALLING) | 
|  | writel_relaxed(mask, &g->set_falling); | 
|  | if (status & IRQ_TYPE_EDGE_RISING) | 
|  | writel_relaxed(mask, &g->set_rising); | 
|  | } | 
|  |  | 
|  | static int gpio_irq_type(struct irq_data *d, unsigned trigger) | 
|  | { | 
|  | if (trigger & ~(IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING)) | 
|  | return -EINVAL; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static struct irq_chip gpio_irqchip = { | 
|  | .name		= "GPIO", | 
|  | .irq_enable	= gpio_irq_enable, | 
|  | .irq_disable	= gpio_irq_disable, | 
|  | .irq_set_type	= gpio_irq_type, | 
|  | .flags		= IRQCHIP_SET_TYPE_MASKED, | 
|  | }; | 
|  |  | 
|  | static void gpio_irq_handler(struct irq_desc *desc) | 
|  | { | 
|  | unsigned int irq = irq_desc_get_irq(desc); | 
|  | struct davinci_gpio_regs __iomem *g; | 
|  | u32 mask = 0xffff; | 
|  | struct davinci_gpio_controller *d; | 
|  |  | 
|  | d = (struct davinci_gpio_controller *)irq_desc_get_handler_data(desc); | 
|  | g = (struct davinci_gpio_regs __iomem *)d->regs; | 
|  |  | 
|  | /* we only care about one bank */ | 
|  | if (irq & 1) | 
|  | mask <<= 16; | 
|  |  | 
|  | /* temporarily mask (level sensitive) parent IRQ */ | 
|  | chained_irq_enter(irq_desc_get_chip(desc), desc); | 
|  | while (1) { | 
|  | u32		status; | 
|  | int		bit; | 
|  |  | 
|  | /* ack any irqs */ | 
|  | status = readl_relaxed(&g->intstat) & mask; | 
|  | if (!status) | 
|  | break; | 
|  | writel_relaxed(status, &g->intstat); | 
|  |  | 
|  | /* now demux them to the right lowlevel handler */ | 
|  |  | 
|  | while (status) { | 
|  | bit = __ffs(status); | 
|  | status &= ~BIT(bit); | 
|  | generic_handle_irq( | 
|  | irq_find_mapping(d->irq_domain, | 
|  | d->chip.base + bit)); | 
|  | } | 
|  | } | 
|  | chained_irq_exit(irq_desc_get_chip(desc), desc); | 
|  | /* now it may re-trigger */ | 
|  | } | 
|  |  | 
|  | static int gpio_to_irq_banked(struct gpio_chip *chip, unsigned offset) | 
|  | { | 
|  | struct davinci_gpio_controller *d = gpiochip_get_data(chip); | 
|  |  | 
|  | if (d->irq_domain) | 
|  | return irq_create_mapping(d->irq_domain, d->chip.base + offset); | 
|  | else | 
|  | return -ENXIO; | 
|  | } | 
|  |  | 
|  | static int gpio_to_irq_unbanked(struct gpio_chip *chip, unsigned offset) | 
|  | { | 
|  | struct davinci_gpio_controller *d = gpiochip_get_data(chip); | 
|  |  | 
|  | /* | 
|  | * NOTE:  we assume for now that only irqs in the first gpio_chip | 
|  | * can provide direct-mapped IRQs to AINTC (up to 32 GPIOs). | 
|  | */ | 
|  | if (offset < d->gpio_unbanked) | 
|  | return d->gpio_irq + offset; | 
|  | else | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | static int gpio_irq_type_unbanked(struct irq_data *data, unsigned trigger) | 
|  | { | 
|  | struct davinci_gpio_controller *d; | 
|  | struct davinci_gpio_regs __iomem *g; | 
|  | u32 mask; | 
|  |  | 
|  | d = (struct davinci_gpio_controller *)irq_data_get_irq_handler_data(data); | 
|  | g = (struct davinci_gpio_regs __iomem *)d->regs; | 
|  | mask = __gpio_mask(data->irq - d->gpio_irq); | 
|  |  | 
|  | if (trigger & ~(IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING)) | 
|  | return -EINVAL; | 
|  |  | 
|  | writel_relaxed(mask, (trigger & IRQ_TYPE_EDGE_FALLING) | 
|  | ? &g->set_falling : &g->clr_falling); | 
|  | writel_relaxed(mask, (trigger & IRQ_TYPE_EDGE_RISING) | 
|  | ? &g->set_rising : &g->clr_rising); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int | 
|  | davinci_gpio_irq_map(struct irq_domain *d, unsigned int irq, | 
|  | irq_hw_number_t hw) | 
|  | { | 
|  | struct davinci_gpio_regs __iomem *g = gpio2regs(hw); | 
|  |  | 
|  | irq_set_chip_and_handler_name(irq, &gpio_irqchip, handle_simple_irq, | 
|  | "davinci_gpio"); | 
|  | irq_set_irq_type(irq, IRQ_TYPE_NONE); | 
|  | irq_set_chip_data(irq, (__force void *)g); | 
|  | irq_set_handler_data(irq, (void *)__gpio_mask(hw)); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const struct irq_domain_ops davinci_gpio_irq_ops = { | 
|  | .map = davinci_gpio_irq_map, | 
|  | .xlate = irq_domain_xlate_onetwocell, | 
|  | }; | 
|  |  | 
|  | static struct irq_chip *davinci_gpio_get_irq_chip(unsigned int irq) | 
|  | { | 
|  | static struct irq_chip_type gpio_unbanked; | 
|  |  | 
|  | gpio_unbanked = *irq_data_get_chip_type(irq_get_irq_data(irq)); | 
|  |  | 
|  | return &gpio_unbanked.chip; | 
|  | }; | 
|  |  | 
|  | static struct irq_chip *keystone_gpio_get_irq_chip(unsigned int irq) | 
|  | { | 
|  | static struct irq_chip gpio_unbanked; | 
|  |  | 
|  | gpio_unbanked = *irq_get_chip(irq); | 
|  | return &gpio_unbanked; | 
|  | }; | 
|  |  | 
|  | static const struct of_device_id davinci_gpio_ids[]; | 
|  |  | 
|  | /* | 
|  | * NOTE:  for suspend/resume, probably best to make a platform_device with | 
|  | * suspend_late/resume_resume calls hooking into results of the set_wake() | 
|  | * calls ... so if no gpios are wakeup events the clock can be disabled, | 
|  | * with outputs left at previously set levels, and so that VDD3P3V.IOPWDN0 | 
|  | * (dm6446) can be set appropriately for GPIOV33 pins. | 
|  | */ | 
|  |  | 
|  | static int davinci_gpio_irq_setup(struct platform_device *pdev) | 
|  | { | 
|  | unsigned	gpio, bank; | 
|  | int		irq; | 
|  | struct clk	*clk; | 
|  | u32		binten = 0; | 
|  | unsigned	ngpio, bank_irq; | 
|  | struct device *dev = &pdev->dev; | 
|  | struct resource	*res; | 
|  | struct davinci_gpio_controller *chips = platform_get_drvdata(pdev); | 
|  | struct davinci_gpio_platform_data *pdata = dev->platform_data; | 
|  | struct davinci_gpio_regs __iomem *g; | 
|  | struct irq_domain	*irq_domain = NULL; | 
|  | const struct of_device_id *match; | 
|  | struct irq_chip *irq_chip; | 
|  | gpio_get_irq_chip_cb_t gpio_get_irq_chip; | 
|  |  | 
|  | /* | 
|  | * Use davinci_gpio_get_irq_chip by default to handle non DT cases | 
|  | */ | 
|  | gpio_get_irq_chip = davinci_gpio_get_irq_chip; | 
|  | match = of_match_device(of_match_ptr(davinci_gpio_ids), | 
|  | dev); | 
|  | if (match) | 
|  | gpio_get_irq_chip = (gpio_get_irq_chip_cb_t)match->data; | 
|  |  | 
|  | ngpio = pdata->ngpio; | 
|  | res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); | 
|  | if (!res) { | 
|  | dev_err(dev, "Invalid IRQ resource\n"); | 
|  | return -EBUSY; | 
|  | } | 
|  |  | 
|  | bank_irq = res->start; | 
|  |  | 
|  | if (!bank_irq) { | 
|  | dev_err(dev, "Invalid IRQ resource\n"); | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | clk = devm_clk_get(dev, "gpio"); | 
|  | if (IS_ERR(clk)) { | 
|  | printk(KERN_ERR "Error %ld getting gpio clock?\n", | 
|  | PTR_ERR(clk)); | 
|  | return PTR_ERR(clk); | 
|  | } | 
|  | clk_prepare_enable(clk); | 
|  |  | 
|  | if (!pdata->gpio_unbanked) { | 
|  | irq = irq_alloc_descs(-1, 0, ngpio, 0); | 
|  | if (irq < 0) { | 
|  | dev_err(dev, "Couldn't allocate IRQ numbers\n"); | 
|  | return irq; | 
|  | } | 
|  |  | 
|  | irq_domain = irq_domain_add_legacy(dev->of_node, ngpio, irq, 0, | 
|  | &davinci_gpio_irq_ops, | 
|  | chips); | 
|  | if (!irq_domain) { | 
|  | dev_err(dev, "Couldn't register an IRQ domain\n"); | 
|  | return -ENODEV; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Arrange gpio_to_irq() support, handling either direct IRQs or | 
|  | * banked IRQs.  Having GPIOs in the first GPIO bank use direct | 
|  | * IRQs, while the others use banked IRQs, would need some setup | 
|  | * tweaks to recognize hardware which can do that. | 
|  | */ | 
|  | for (gpio = 0, bank = 0; gpio < ngpio; bank++, gpio += 32) { | 
|  | chips[bank].chip.to_irq = gpio_to_irq_banked; | 
|  | chips[bank].irq_domain = irq_domain; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * AINTC can handle direct/unbanked IRQs for GPIOs, with the GPIO | 
|  | * controller only handling trigger modes.  We currently assume no | 
|  | * IRQ mux conflicts; gpio_irq_type_unbanked() is only for GPIOs. | 
|  | */ | 
|  | if (pdata->gpio_unbanked) { | 
|  | /* pass "bank 0" GPIO IRQs to AINTC */ | 
|  | chips[0].chip.to_irq = gpio_to_irq_unbanked; | 
|  | chips[0].gpio_irq = bank_irq; | 
|  | chips[0].gpio_unbanked = pdata->gpio_unbanked; | 
|  | binten = GENMASK(pdata->gpio_unbanked / 16, 0); | 
|  |  | 
|  | /* AINTC handles mask/unmask; GPIO handles triggering */ | 
|  | irq = bank_irq; | 
|  | irq_chip = gpio_get_irq_chip(irq); | 
|  | irq_chip->name = "GPIO-AINTC"; | 
|  | irq_chip->irq_set_type = gpio_irq_type_unbanked; | 
|  |  | 
|  | /* default trigger: both edges */ | 
|  | g = gpio2regs(0); | 
|  | writel_relaxed(~0, &g->set_falling); | 
|  | writel_relaxed(~0, &g->set_rising); | 
|  |  | 
|  | /* set the direct IRQs up to use that irqchip */ | 
|  | for (gpio = 0; gpio < pdata->gpio_unbanked; gpio++, irq++) { | 
|  | irq_set_chip(irq, irq_chip); | 
|  | irq_set_handler_data(irq, &chips[gpio / 32]); | 
|  | irq_set_status_flags(irq, IRQ_TYPE_EDGE_BOTH); | 
|  | } | 
|  |  | 
|  | goto done; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Or, AINTC can handle IRQs for banks of 16 GPIO IRQs, which we | 
|  | * then chain through our own handler. | 
|  | */ | 
|  | for (gpio = 0, bank = 0; gpio < ngpio; bank++, bank_irq++, gpio += 16) { | 
|  | /* disabled by default, enabled only as needed */ | 
|  | g = gpio2regs(gpio); | 
|  | writel_relaxed(~0, &g->clr_falling); | 
|  | writel_relaxed(~0, &g->clr_rising); | 
|  |  | 
|  | /* | 
|  | * Each chip handles 32 gpios, and each irq bank consists of 16 | 
|  | * gpio irqs. Pass the irq bank's corresponding controller to | 
|  | * the chained irq handler. | 
|  | */ | 
|  | irq_set_chained_handler_and_data(bank_irq, gpio_irq_handler, | 
|  | &chips[gpio / 32]); | 
|  |  | 
|  | binten |= BIT(bank); | 
|  | } | 
|  |  | 
|  | done: | 
|  | /* | 
|  | * BINTEN -- per-bank interrupt enable. genirq would also let these | 
|  | * bits be set/cleared dynamically. | 
|  | */ | 
|  | writel_relaxed(binten, gpio_base + BINTEN); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | #if IS_ENABLED(CONFIG_OF) | 
|  | static const struct of_device_id davinci_gpio_ids[] = { | 
|  | { .compatible = "ti,keystone-gpio", keystone_gpio_get_irq_chip}, | 
|  | { .compatible = "ti,dm6441-gpio", davinci_gpio_get_irq_chip}, | 
|  | { /* sentinel */ }, | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(of, davinci_gpio_ids); | 
|  | #endif | 
|  |  | 
|  | static struct platform_driver davinci_gpio_driver = { | 
|  | .probe		= davinci_gpio_probe, | 
|  | .driver		= { | 
|  | .name		= "davinci_gpio", | 
|  | .of_match_table	= of_match_ptr(davinci_gpio_ids), | 
|  | }, | 
|  | }; | 
|  |  | 
|  | /** | 
|  | * GPIO driver registration needs to be done before machine_init functions | 
|  | * access GPIO. Hence davinci_gpio_drv_reg() is a postcore_initcall. | 
|  | */ | 
|  | static int __init davinci_gpio_drv_reg(void) | 
|  | { | 
|  | return platform_driver_register(&davinci_gpio_driver); | 
|  | } | 
|  | postcore_initcall(davinci_gpio_drv_reg); |