|  | /****************************************************************************** | 
|  | * | 
|  | * Copyright(c) 2005 - 2014 Intel Corporation. All rights reserved. | 
|  | * Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH | 
|  | * Copyright(c) 2016 Intel Deutschland GmbH | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify it | 
|  | * under the terms of version 2 of the GNU General Public License as | 
|  | * published by the Free Software Foundation. | 
|  | * | 
|  | * This program is distributed in the hope that it will be useful, but WITHOUT | 
|  | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or | 
|  | * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for | 
|  | * more details. | 
|  | * | 
|  | * You should have received a copy of the GNU General Public License along with | 
|  | * this program; if not, write to the Free Software Foundation, Inc., | 
|  | * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA | 
|  | * | 
|  | * The full GNU General Public License is included in this distribution in the | 
|  | * file called LICENSE. | 
|  | * | 
|  | * Contact Information: | 
|  | *  Intel Linux Wireless <linuxwifi@intel.com> | 
|  | * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 | 
|  | * | 
|  | *****************************************************************************/ | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/skbuff.h> | 
|  | #include <linux/slab.h> | 
|  | #include <net/mac80211.h> | 
|  |  | 
|  | #include <linux/netdevice.h> | 
|  | #include <linux/etherdevice.h> | 
|  | #include <linux/delay.h> | 
|  |  | 
|  | #include <linux/workqueue.h> | 
|  | #include "rs.h" | 
|  | #include "fw-api.h" | 
|  | #include "sta.h" | 
|  | #include "iwl-op-mode.h" | 
|  | #include "mvm.h" | 
|  | #include "debugfs.h" | 
|  |  | 
|  | #define RS_NAME "iwl-mvm-rs" | 
|  |  | 
|  | #define IWL_RATE_MAX_WINDOW		62	/* # tx in history window */ | 
|  |  | 
|  | /* Calculations of success ratio are done in fixed point where 12800 is 100%. | 
|  | * Use this macro when dealing with thresholds consts set as a percentage | 
|  | */ | 
|  | #define RS_PERCENT(x) (128 * x) | 
|  |  | 
|  | static u8 rs_ht_to_legacy[] = { | 
|  | [IWL_RATE_MCS_0_INDEX] = IWL_RATE_6M_INDEX, | 
|  | [IWL_RATE_MCS_1_INDEX] = IWL_RATE_9M_INDEX, | 
|  | [IWL_RATE_MCS_2_INDEX] = IWL_RATE_12M_INDEX, | 
|  | [IWL_RATE_MCS_3_INDEX] = IWL_RATE_18M_INDEX, | 
|  | [IWL_RATE_MCS_4_INDEX] = IWL_RATE_24M_INDEX, | 
|  | [IWL_RATE_MCS_5_INDEX] = IWL_RATE_36M_INDEX, | 
|  | [IWL_RATE_MCS_6_INDEX] = IWL_RATE_48M_INDEX, | 
|  | [IWL_RATE_MCS_7_INDEX] = IWL_RATE_54M_INDEX, | 
|  | [IWL_RATE_MCS_8_INDEX] = IWL_RATE_54M_INDEX, | 
|  | [IWL_RATE_MCS_9_INDEX] = IWL_RATE_54M_INDEX, | 
|  | }; | 
|  |  | 
|  | static const u8 ant_toggle_lookup[] = { | 
|  | [ANT_NONE] = ANT_NONE, | 
|  | [ANT_A] = ANT_B, | 
|  | [ANT_B] = ANT_C, | 
|  | [ANT_AB] = ANT_BC, | 
|  | [ANT_C] = ANT_A, | 
|  | [ANT_AC] = ANT_AB, | 
|  | [ANT_BC] = ANT_AC, | 
|  | [ANT_ABC] = ANT_ABC, | 
|  | }; | 
|  |  | 
|  | #define IWL_DECLARE_RATE_INFO(r, s, rp, rn)			      \ | 
|  | [IWL_RATE_##r##M_INDEX] = { IWL_RATE_##r##M_PLCP,	      \ | 
|  | IWL_RATE_HT_SISO_MCS_##s##_PLCP,  \ | 
|  | IWL_RATE_HT_MIMO2_MCS_##s##_PLCP, \ | 
|  | IWL_RATE_VHT_SISO_MCS_##s##_PLCP, \ | 
|  | IWL_RATE_VHT_MIMO2_MCS_##s##_PLCP,\ | 
|  | IWL_RATE_##rp##M_INDEX,	      \ | 
|  | IWL_RATE_##rn##M_INDEX } | 
|  |  | 
|  | #define IWL_DECLARE_MCS_RATE(s)						  \ | 
|  | [IWL_RATE_MCS_##s##_INDEX] = { IWL_RATE_INVM_PLCP,		  \ | 
|  | IWL_RATE_HT_SISO_MCS_##s##_PLCP,	  \ | 
|  | IWL_RATE_HT_MIMO2_MCS_##s##_PLCP,  \ | 
|  | IWL_RATE_VHT_SISO_MCS_##s##_PLCP,  \ | 
|  | IWL_RATE_VHT_MIMO2_MCS_##s##_PLCP, \ | 
|  | IWL_RATE_INVM_INDEX,	          \ | 
|  | IWL_RATE_INVM_INDEX } | 
|  |  | 
|  | /* | 
|  | * Parameter order: | 
|  | *   rate, ht rate, prev rate, next rate | 
|  | * | 
|  | * If there isn't a valid next or previous rate then INV is used which | 
|  | * maps to IWL_RATE_INVALID | 
|  | * | 
|  | */ | 
|  | static const struct iwl_rs_rate_info iwl_rates[IWL_RATE_COUNT] = { | 
|  | IWL_DECLARE_RATE_INFO(1, INV, INV, 2),   /*  1mbps */ | 
|  | IWL_DECLARE_RATE_INFO(2, INV, 1, 5),     /*  2mbps */ | 
|  | IWL_DECLARE_RATE_INFO(5, INV, 2, 11),    /*5.5mbps */ | 
|  | IWL_DECLARE_RATE_INFO(11, INV, 9, 12),   /* 11mbps */ | 
|  | IWL_DECLARE_RATE_INFO(6, 0, 5, 11),      /*  6mbps ; MCS 0 */ | 
|  | IWL_DECLARE_RATE_INFO(9, INV, 6, 11),    /*  9mbps */ | 
|  | IWL_DECLARE_RATE_INFO(12, 1, 11, 18),    /* 12mbps ; MCS 1 */ | 
|  | IWL_DECLARE_RATE_INFO(18, 2, 12, 24),    /* 18mbps ; MCS 2 */ | 
|  | IWL_DECLARE_RATE_INFO(24, 3, 18, 36),    /* 24mbps ; MCS 3 */ | 
|  | IWL_DECLARE_RATE_INFO(36, 4, 24, 48),    /* 36mbps ; MCS 4 */ | 
|  | IWL_DECLARE_RATE_INFO(48, 5, 36, 54),    /* 48mbps ; MCS 5 */ | 
|  | IWL_DECLARE_RATE_INFO(54, 6, 48, INV),   /* 54mbps ; MCS 6 */ | 
|  | IWL_DECLARE_MCS_RATE(7),                 /* MCS 7 */ | 
|  | IWL_DECLARE_MCS_RATE(8),                 /* MCS 8 */ | 
|  | IWL_DECLARE_MCS_RATE(9),                 /* MCS 9 */ | 
|  | }; | 
|  |  | 
|  | enum rs_action { | 
|  | RS_ACTION_STAY = 0, | 
|  | RS_ACTION_DOWNSCALE = -1, | 
|  | RS_ACTION_UPSCALE = 1, | 
|  | }; | 
|  |  | 
|  | enum rs_column_mode { | 
|  | RS_INVALID = 0, | 
|  | RS_LEGACY, | 
|  | RS_SISO, | 
|  | RS_MIMO2, | 
|  | }; | 
|  |  | 
|  | #define MAX_NEXT_COLUMNS 7 | 
|  | #define MAX_COLUMN_CHECKS 3 | 
|  |  | 
|  | struct rs_tx_column; | 
|  |  | 
|  | typedef bool (*allow_column_func_t) (struct iwl_mvm *mvm, | 
|  | struct ieee80211_sta *sta, | 
|  | struct rs_rate *rate, | 
|  | const struct rs_tx_column *next_col); | 
|  |  | 
|  | struct rs_tx_column { | 
|  | enum rs_column_mode mode; | 
|  | u8 ant; | 
|  | bool sgi; | 
|  | enum rs_column next_columns[MAX_NEXT_COLUMNS]; | 
|  | allow_column_func_t checks[MAX_COLUMN_CHECKS]; | 
|  | }; | 
|  |  | 
|  | static bool rs_ant_allow(struct iwl_mvm *mvm, struct ieee80211_sta *sta, | 
|  | struct rs_rate *rate, | 
|  | const struct rs_tx_column *next_col) | 
|  | { | 
|  | return iwl_mvm_bt_coex_is_ant_avail(mvm, next_col->ant); | 
|  | } | 
|  |  | 
|  | static bool rs_mimo_allow(struct iwl_mvm *mvm, struct ieee80211_sta *sta, | 
|  | struct rs_rate *rate, | 
|  | const struct rs_tx_column *next_col) | 
|  | { | 
|  | struct iwl_mvm_sta *mvmsta; | 
|  | struct iwl_mvm_vif *mvmvif; | 
|  |  | 
|  | if (!sta->ht_cap.ht_supported) | 
|  | return false; | 
|  |  | 
|  | if (sta->smps_mode == IEEE80211_SMPS_STATIC) | 
|  | return false; | 
|  |  | 
|  | if (num_of_ant(iwl_mvm_get_valid_tx_ant(mvm)) < 2) | 
|  | return false; | 
|  |  | 
|  | if (!iwl_mvm_bt_coex_is_mimo_allowed(mvm, sta)) | 
|  | return false; | 
|  |  | 
|  | mvmsta = iwl_mvm_sta_from_mac80211(sta); | 
|  | mvmvif = iwl_mvm_vif_from_mac80211(mvmsta->vif); | 
|  |  | 
|  | if (mvm->nvm_data->sku_cap_mimo_disabled) | 
|  | return false; | 
|  |  | 
|  | return true; | 
|  | } | 
|  |  | 
|  | static bool rs_siso_allow(struct iwl_mvm *mvm, struct ieee80211_sta *sta, | 
|  | struct rs_rate *rate, | 
|  | const struct rs_tx_column *next_col) | 
|  | { | 
|  | if (!sta->ht_cap.ht_supported) | 
|  | return false; | 
|  |  | 
|  | return true; | 
|  | } | 
|  |  | 
|  | static bool rs_sgi_allow(struct iwl_mvm *mvm, struct ieee80211_sta *sta, | 
|  | struct rs_rate *rate, | 
|  | const struct rs_tx_column *next_col) | 
|  | { | 
|  | struct ieee80211_sta_ht_cap *ht_cap = &sta->ht_cap; | 
|  | struct ieee80211_sta_vht_cap *vht_cap = &sta->vht_cap; | 
|  |  | 
|  | if (is_ht20(rate) && (ht_cap->cap & | 
|  | IEEE80211_HT_CAP_SGI_20)) | 
|  | return true; | 
|  | if (is_ht40(rate) && (ht_cap->cap & | 
|  | IEEE80211_HT_CAP_SGI_40)) | 
|  | return true; | 
|  | if (is_ht80(rate) && (vht_cap->cap & | 
|  | IEEE80211_VHT_CAP_SHORT_GI_80)) | 
|  | return true; | 
|  | if (is_ht160(rate) && (vht_cap->cap & | 
|  | IEEE80211_VHT_CAP_SHORT_GI_160)) | 
|  | return true; | 
|  |  | 
|  | return false; | 
|  | } | 
|  |  | 
|  | static const struct rs_tx_column rs_tx_columns[] = { | 
|  | [RS_COLUMN_LEGACY_ANT_A] = { | 
|  | .mode = RS_LEGACY, | 
|  | .ant = ANT_A, | 
|  | .next_columns = { | 
|  | RS_COLUMN_LEGACY_ANT_B, | 
|  | RS_COLUMN_SISO_ANT_A, | 
|  | RS_COLUMN_MIMO2, | 
|  | RS_COLUMN_INVALID, | 
|  | RS_COLUMN_INVALID, | 
|  | RS_COLUMN_INVALID, | 
|  | RS_COLUMN_INVALID, | 
|  | }, | 
|  | .checks = { | 
|  | rs_ant_allow, | 
|  | }, | 
|  | }, | 
|  | [RS_COLUMN_LEGACY_ANT_B] = { | 
|  | .mode = RS_LEGACY, | 
|  | .ant = ANT_B, | 
|  | .next_columns = { | 
|  | RS_COLUMN_LEGACY_ANT_A, | 
|  | RS_COLUMN_SISO_ANT_B, | 
|  | RS_COLUMN_MIMO2, | 
|  | RS_COLUMN_INVALID, | 
|  | RS_COLUMN_INVALID, | 
|  | RS_COLUMN_INVALID, | 
|  | RS_COLUMN_INVALID, | 
|  | }, | 
|  | .checks = { | 
|  | rs_ant_allow, | 
|  | }, | 
|  | }, | 
|  | [RS_COLUMN_SISO_ANT_A] = { | 
|  | .mode = RS_SISO, | 
|  | .ant = ANT_A, | 
|  | .next_columns = { | 
|  | RS_COLUMN_SISO_ANT_B, | 
|  | RS_COLUMN_MIMO2, | 
|  | RS_COLUMN_SISO_ANT_A_SGI, | 
|  | RS_COLUMN_LEGACY_ANT_A, | 
|  | RS_COLUMN_LEGACY_ANT_B, | 
|  | RS_COLUMN_INVALID, | 
|  | RS_COLUMN_INVALID, | 
|  | }, | 
|  | .checks = { | 
|  | rs_siso_allow, | 
|  | rs_ant_allow, | 
|  | }, | 
|  | }, | 
|  | [RS_COLUMN_SISO_ANT_B] = { | 
|  | .mode = RS_SISO, | 
|  | .ant = ANT_B, | 
|  | .next_columns = { | 
|  | RS_COLUMN_SISO_ANT_A, | 
|  | RS_COLUMN_MIMO2, | 
|  | RS_COLUMN_SISO_ANT_B_SGI, | 
|  | RS_COLUMN_LEGACY_ANT_A, | 
|  | RS_COLUMN_LEGACY_ANT_B, | 
|  | RS_COLUMN_INVALID, | 
|  | RS_COLUMN_INVALID, | 
|  | }, | 
|  | .checks = { | 
|  | rs_siso_allow, | 
|  | rs_ant_allow, | 
|  | }, | 
|  | }, | 
|  | [RS_COLUMN_SISO_ANT_A_SGI] = { | 
|  | .mode = RS_SISO, | 
|  | .ant = ANT_A, | 
|  | .sgi = true, | 
|  | .next_columns = { | 
|  | RS_COLUMN_SISO_ANT_B_SGI, | 
|  | RS_COLUMN_MIMO2_SGI, | 
|  | RS_COLUMN_SISO_ANT_A, | 
|  | RS_COLUMN_LEGACY_ANT_A, | 
|  | RS_COLUMN_LEGACY_ANT_B, | 
|  | RS_COLUMN_INVALID, | 
|  | RS_COLUMN_INVALID, | 
|  | }, | 
|  | .checks = { | 
|  | rs_siso_allow, | 
|  | rs_ant_allow, | 
|  | rs_sgi_allow, | 
|  | }, | 
|  | }, | 
|  | [RS_COLUMN_SISO_ANT_B_SGI] = { | 
|  | .mode = RS_SISO, | 
|  | .ant = ANT_B, | 
|  | .sgi = true, | 
|  | .next_columns = { | 
|  | RS_COLUMN_SISO_ANT_A_SGI, | 
|  | RS_COLUMN_MIMO2_SGI, | 
|  | RS_COLUMN_SISO_ANT_B, | 
|  | RS_COLUMN_LEGACY_ANT_A, | 
|  | RS_COLUMN_LEGACY_ANT_B, | 
|  | RS_COLUMN_INVALID, | 
|  | RS_COLUMN_INVALID, | 
|  | }, | 
|  | .checks = { | 
|  | rs_siso_allow, | 
|  | rs_ant_allow, | 
|  | rs_sgi_allow, | 
|  | }, | 
|  | }, | 
|  | [RS_COLUMN_MIMO2] = { | 
|  | .mode = RS_MIMO2, | 
|  | .ant = ANT_AB, | 
|  | .next_columns = { | 
|  | RS_COLUMN_SISO_ANT_A, | 
|  | RS_COLUMN_MIMO2_SGI, | 
|  | RS_COLUMN_LEGACY_ANT_A, | 
|  | RS_COLUMN_LEGACY_ANT_B, | 
|  | RS_COLUMN_INVALID, | 
|  | RS_COLUMN_INVALID, | 
|  | RS_COLUMN_INVALID, | 
|  | }, | 
|  | .checks = { | 
|  | rs_mimo_allow, | 
|  | }, | 
|  | }, | 
|  | [RS_COLUMN_MIMO2_SGI] = { | 
|  | .mode = RS_MIMO2, | 
|  | .ant = ANT_AB, | 
|  | .sgi = true, | 
|  | .next_columns = { | 
|  | RS_COLUMN_SISO_ANT_A_SGI, | 
|  | RS_COLUMN_MIMO2, | 
|  | RS_COLUMN_LEGACY_ANT_A, | 
|  | RS_COLUMN_LEGACY_ANT_B, | 
|  | RS_COLUMN_INVALID, | 
|  | RS_COLUMN_INVALID, | 
|  | RS_COLUMN_INVALID, | 
|  | }, | 
|  | .checks = { | 
|  | rs_mimo_allow, | 
|  | rs_sgi_allow, | 
|  | }, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static inline u8 rs_extract_rate(u32 rate_n_flags) | 
|  | { | 
|  | /* also works for HT because bits 7:6 are zero there */ | 
|  | return (u8)(rate_n_flags & RATE_LEGACY_RATE_MSK); | 
|  | } | 
|  |  | 
|  | static int iwl_hwrate_to_plcp_idx(u32 rate_n_flags) | 
|  | { | 
|  | int idx = 0; | 
|  |  | 
|  | if (rate_n_flags & RATE_MCS_HT_MSK) { | 
|  | idx = rate_n_flags & RATE_HT_MCS_RATE_CODE_MSK; | 
|  | idx += IWL_RATE_MCS_0_INDEX; | 
|  |  | 
|  | /* skip 9M not supported in HT*/ | 
|  | if (idx >= IWL_RATE_9M_INDEX) | 
|  | idx += 1; | 
|  | if ((idx >= IWL_FIRST_HT_RATE) && (idx <= IWL_LAST_HT_RATE)) | 
|  | return idx; | 
|  | } else if (rate_n_flags & RATE_MCS_VHT_MSK) { | 
|  | idx = rate_n_flags & RATE_VHT_MCS_RATE_CODE_MSK; | 
|  | idx += IWL_RATE_MCS_0_INDEX; | 
|  |  | 
|  | /* skip 9M not supported in VHT*/ | 
|  | if (idx >= IWL_RATE_9M_INDEX) | 
|  | idx++; | 
|  | if ((idx >= IWL_FIRST_VHT_RATE) && (idx <= IWL_LAST_VHT_RATE)) | 
|  | return idx; | 
|  | } else { | 
|  | /* legacy rate format, search for match in table */ | 
|  |  | 
|  | u8 legacy_rate = rs_extract_rate(rate_n_flags); | 
|  | for (idx = 0; idx < ARRAY_SIZE(iwl_rates); idx++) | 
|  | if (iwl_rates[idx].plcp == legacy_rate) | 
|  | return idx; | 
|  | } | 
|  |  | 
|  | return IWL_RATE_INVALID; | 
|  | } | 
|  |  | 
|  | static void rs_rate_scale_perform(struct iwl_mvm *mvm, | 
|  | struct ieee80211_sta *sta, | 
|  | struct iwl_lq_sta *lq_sta, | 
|  | int tid, bool ndp); | 
|  | static void rs_fill_lq_cmd(struct iwl_mvm *mvm, | 
|  | struct ieee80211_sta *sta, | 
|  | struct iwl_lq_sta *lq_sta, | 
|  | const struct rs_rate *initial_rate); | 
|  | static void rs_stay_in_table(struct iwl_lq_sta *lq_sta, bool force_search); | 
|  |  | 
|  | /** | 
|  | * The following tables contain the expected throughput metrics for all rates | 
|  | * | 
|  | *	1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, 54, 60 MBits | 
|  | * | 
|  | * where invalid entries are zeros. | 
|  | * | 
|  | * CCK rates are only valid in legacy table and will only be used in G | 
|  | * (2.4 GHz) band. | 
|  | */ | 
|  |  | 
|  | static const u16 expected_tpt_legacy[IWL_RATE_COUNT] = { | 
|  | 7, 13, 35, 58, 40, 57, 72, 98, 121, 154, 177, 186, 0, 0, 0 | 
|  | }; | 
|  |  | 
|  | /* Expected TpT tables. 4 indexes: | 
|  | * 0 - NGI, 1 - SGI, 2 - AGG+NGI, 3 - AGG+SGI | 
|  | */ | 
|  | static const u16 expected_tpt_siso_20MHz[4][IWL_RATE_COUNT] = { | 
|  | {0, 0, 0, 0, 42, 0,  76, 102, 124, 159, 183, 193, 202, 216, 0}, | 
|  | {0, 0, 0, 0, 46, 0,  82, 110, 132, 168, 192, 202, 210, 225, 0}, | 
|  | {0, 0, 0, 0, 49, 0,  97, 145, 192, 285, 375, 420, 464, 551, 0}, | 
|  | {0, 0, 0, 0, 54, 0, 108, 160, 213, 315, 415, 465, 513, 608, 0}, | 
|  | }; | 
|  |  | 
|  | static const u16 expected_tpt_siso_40MHz[4][IWL_RATE_COUNT] = { | 
|  | {0, 0, 0, 0,  77, 0, 127, 160, 184, 220, 242, 250,  257,  269,  275}, | 
|  | {0, 0, 0, 0,  83, 0, 135, 169, 193, 229, 250, 257,  264,  275,  280}, | 
|  | {0, 0, 0, 0, 101, 0, 199, 295, 389, 570, 744, 828,  911, 1070, 1173}, | 
|  | {0, 0, 0, 0, 112, 0, 220, 326, 429, 629, 819, 912, 1000, 1173, 1284}, | 
|  | }; | 
|  |  | 
|  | static const u16 expected_tpt_siso_80MHz[4][IWL_RATE_COUNT] = { | 
|  | {0, 0, 0, 0, 130, 0, 191, 223, 244,  273,  288,  294,  298,  305,  308}, | 
|  | {0, 0, 0, 0, 138, 0, 200, 231, 251,  279,  293,  298,  302,  308,  312}, | 
|  | {0, 0, 0, 0, 217, 0, 429, 634, 834, 1220, 1585, 1760, 1931, 2258, 2466}, | 
|  | {0, 0, 0, 0, 241, 0, 475, 701, 921, 1343, 1741, 1931, 2117, 2468, 2691}, | 
|  | }; | 
|  |  | 
|  | static const u16 expected_tpt_siso_160MHz[4][IWL_RATE_COUNT] = { | 
|  | {0, 0, 0, 0, 191, 0, 244, 288,  298,  308,  313,  318,  323,  328,  330}, | 
|  | {0, 0, 0, 0, 200, 0, 251, 293,  302,  312,  317,  322,  327,  332,  334}, | 
|  | {0, 0, 0, 0, 439, 0, 875, 1307, 1736, 2584, 3419, 3831, 4240, 5049, 5581}, | 
|  | {0, 0, 0, 0, 488, 0, 972, 1451, 1925, 2864, 3785, 4240, 4691, 5581, 6165}, | 
|  | }; | 
|  |  | 
|  | static const u16 expected_tpt_mimo2_20MHz[4][IWL_RATE_COUNT] = { | 
|  | {0, 0, 0, 0,  74, 0, 123, 155, 179, 213, 235, 243, 250,  261, 0}, | 
|  | {0, 0, 0, 0,  81, 0, 131, 164, 187, 221, 242, 250, 256,  267, 0}, | 
|  | {0, 0, 0, 0,  98, 0, 193, 286, 375, 550, 718, 799, 878, 1032, 0}, | 
|  | {0, 0, 0, 0, 109, 0, 214, 316, 414, 607, 790, 879, 965, 1132, 0}, | 
|  | }; | 
|  |  | 
|  | static const u16 expected_tpt_mimo2_40MHz[4][IWL_RATE_COUNT] = { | 
|  | {0, 0, 0, 0, 123, 0, 182, 214, 235,  264,  279,  285,  289,  296,  300}, | 
|  | {0, 0, 0, 0, 131, 0, 191, 222, 242,  270,  284,  289,  293,  300,  303}, | 
|  | {0, 0, 0, 0, 200, 0, 390, 571, 741, 1067, 1365, 1505, 1640, 1894, 2053}, | 
|  | {0, 0, 0, 0, 221, 0, 430, 630, 816, 1169, 1490, 1641, 1784, 2053, 2221}, | 
|  | }; | 
|  |  | 
|  | static const u16 expected_tpt_mimo2_80MHz[4][IWL_RATE_COUNT] = { | 
|  | {0, 0, 0, 0, 182, 0, 240,  264,  278,  299,  308,  311,  313,  317,  319}, | 
|  | {0, 0, 0, 0, 190, 0, 247,  269,  282,  302,  310,  313,  315,  319,  320}, | 
|  | {0, 0, 0, 0, 428, 0, 833, 1215, 1577, 2254, 2863, 3147, 3418, 3913, 4219}, | 
|  | {0, 0, 0, 0, 474, 0, 920, 1338, 1732, 2464, 3116, 3418, 3705, 4225, 4545}, | 
|  | }; | 
|  |  | 
|  | static const u16 expected_tpt_mimo2_160MHz[4][IWL_RATE_COUNT] = { | 
|  | {0, 0, 0, 0, 240, 0, 278,  308,  313,  319,  322,  324,  328,  330,   334}, | 
|  | {0, 0, 0, 0, 247, 0, 282,  310,  315,  320,  323,  325,  329,  332,   338}, | 
|  | {0, 0, 0, 0, 875, 0, 1735, 2582, 3414, 5043, 6619, 7389, 8147, 9629,  10592}, | 
|  | {0, 0, 0, 0, 971, 0, 1925, 2861, 3779, 5574, 7304, 8147, 8976, 10592, 11640}, | 
|  | }; | 
|  |  | 
|  | /* mbps, mcs */ | 
|  | static const struct iwl_rate_mcs_info iwl_rate_mcs[IWL_RATE_COUNT] = { | 
|  | {  "1", "BPSK DSSS"}, | 
|  | {  "2", "QPSK DSSS"}, | 
|  | {"5.5", "BPSK CCK"}, | 
|  | { "11", "QPSK CCK"}, | 
|  | {  "6", "BPSK 1/2"}, | 
|  | {  "9", "BPSK 1/2"}, | 
|  | { "12", "QPSK 1/2"}, | 
|  | { "18", "QPSK 3/4"}, | 
|  | { "24", "16QAM 1/2"}, | 
|  | { "36", "16QAM 3/4"}, | 
|  | { "48", "64QAM 2/3"}, | 
|  | { "54", "64QAM 3/4"}, | 
|  | { "60", "64QAM 5/6"}, | 
|  | }; | 
|  |  | 
|  | #define MCS_INDEX_PER_STREAM	(8) | 
|  |  | 
|  | static const char *rs_pretty_ant(u8 ant) | 
|  | { | 
|  | static const char * const ant_name[] = { | 
|  | [ANT_NONE] = "None", | 
|  | [ANT_A]    = "A", | 
|  | [ANT_B]    = "B", | 
|  | [ANT_AB]   = "AB", | 
|  | [ANT_C]    = "C", | 
|  | [ANT_AC]   = "AC", | 
|  | [ANT_BC]   = "BC", | 
|  | [ANT_ABC]  = "ABC", | 
|  | }; | 
|  |  | 
|  | if (ant > ANT_ABC) | 
|  | return "UNKNOWN"; | 
|  |  | 
|  | return ant_name[ant]; | 
|  | } | 
|  |  | 
|  | static const char *rs_pretty_lq_type(enum iwl_table_type type) | 
|  | { | 
|  | static const char * const lq_types[] = { | 
|  | [LQ_NONE] = "NONE", | 
|  | [LQ_LEGACY_A] = "LEGACY_A", | 
|  | [LQ_LEGACY_G] = "LEGACY_G", | 
|  | [LQ_HT_SISO] = "HT SISO", | 
|  | [LQ_HT_MIMO2] = "HT MIMO", | 
|  | [LQ_VHT_SISO] = "VHT SISO", | 
|  | [LQ_VHT_MIMO2] = "VHT MIMO", | 
|  | }; | 
|  |  | 
|  | if (type < LQ_NONE || type >= LQ_MAX) | 
|  | return "UNKNOWN"; | 
|  |  | 
|  | return lq_types[type]; | 
|  | } | 
|  |  | 
|  | static char *rs_pretty_rate(const struct rs_rate *rate) | 
|  | { | 
|  | static char buf[40]; | 
|  | static const char * const legacy_rates[] = { | 
|  | [IWL_RATE_1M_INDEX] = "1M", | 
|  | [IWL_RATE_2M_INDEX] = "2M", | 
|  | [IWL_RATE_5M_INDEX] = "5.5M", | 
|  | [IWL_RATE_11M_INDEX] = "11M", | 
|  | [IWL_RATE_6M_INDEX] = "6M", | 
|  | [IWL_RATE_9M_INDEX] = "9M", | 
|  | [IWL_RATE_12M_INDEX] = "12M", | 
|  | [IWL_RATE_18M_INDEX] = "18M", | 
|  | [IWL_RATE_24M_INDEX] = "24M", | 
|  | [IWL_RATE_36M_INDEX] = "36M", | 
|  | [IWL_RATE_48M_INDEX] = "48M", | 
|  | [IWL_RATE_54M_INDEX] = "54M", | 
|  | }; | 
|  | static const char *const ht_vht_rates[] = { | 
|  | [IWL_RATE_MCS_0_INDEX] = "MCS0", | 
|  | [IWL_RATE_MCS_1_INDEX] = "MCS1", | 
|  | [IWL_RATE_MCS_2_INDEX] = "MCS2", | 
|  | [IWL_RATE_MCS_3_INDEX] = "MCS3", | 
|  | [IWL_RATE_MCS_4_INDEX] = "MCS4", | 
|  | [IWL_RATE_MCS_5_INDEX] = "MCS5", | 
|  | [IWL_RATE_MCS_6_INDEX] = "MCS6", | 
|  | [IWL_RATE_MCS_7_INDEX] = "MCS7", | 
|  | [IWL_RATE_MCS_8_INDEX] = "MCS8", | 
|  | [IWL_RATE_MCS_9_INDEX] = "MCS9", | 
|  | }; | 
|  | const char *rate_str; | 
|  |  | 
|  | if (is_type_legacy(rate->type) && (rate->index <= IWL_RATE_54M_INDEX)) | 
|  | rate_str = legacy_rates[rate->index]; | 
|  | else if ((is_type_ht(rate->type) || is_type_vht(rate->type)) && | 
|  | (rate->index >= IWL_RATE_MCS_0_INDEX) && | 
|  | (rate->index <= IWL_RATE_MCS_9_INDEX)) | 
|  | rate_str = ht_vht_rates[rate->index]; | 
|  | else | 
|  | rate_str = "BAD_RATE"; | 
|  |  | 
|  | sprintf(buf, "(%s|%s|%s)", rs_pretty_lq_type(rate->type), | 
|  | rs_pretty_ant(rate->ant), rate_str); | 
|  | return buf; | 
|  | } | 
|  |  | 
|  | static inline void rs_dump_rate(struct iwl_mvm *mvm, const struct rs_rate *rate, | 
|  | const char *prefix) | 
|  | { | 
|  | IWL_DEBUG_RATE(mvm, | 
|  | "%s: %s BW: %d SGI: %d LDPC: %d STBC: %d\n", | 
|  | prefix, rs_pretty_rate(rate), rate->bw, | 
|  | rate->sgi, rate->ldpc, rate->stbc); | 
|  | } | 
|  |  | 
|  | static void rs_rate_scale_clear_window(struct iwl_rate_scale_data *window) | 
|  | { | 
|  | window->data = 0; | 
|  | window->success_counter = 0; | 
|  | window->success_ratio = IWL_INVALID_VALUE; | 
|  | window->counter = 0; | 
|  | window->average_tpt = IWL_INVALID_VALUE; | 
|  | } | 
|  |  | 
|  | static void rs_rate_scale_clear_tbl_windows(struct iwl_mvm *mvm, | 
|  | struct iwl_scale_tbl_info *tbl) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | IWL_DEBUG_RATE(mvm, "Clearing up window stats\n"); | 
|  | for (i = 0; i < IWL_RATE_COUNT; i++) | 
|  | rs_rate_scale_clear_window(&tbl->win[i]); | 
|  |  | 
|  | for (i = 0; i < ARRAY_SIZE(tbl->tpc_win); i++) | 
|  | rs_rate_scale_clear_window(&tbl->tpc_win[i]); | 
|  | } | 
|  |  | 
|  | static inline u8 rs_is_valid_ant(u8 valid_antenna, u8 ant_type) | 
|  | { | 
|  | return (ant_type & valid_antenna) == ant_type; | 
|  | } | 
|  |  | 
|  | static int rs_tl_turn_on_agg_for_tid(struct iwl_mvm *mvm, | 
|  | struct iwl_lq_sta *lq_data, u8 tid, | 
|  | struct ieee80211_sta *sta) | 
|  | { | 
|  | int ret = -EAGAIN; | 
|  |  | 
|  | IWL_DEBUG_HT(mvm, "Starting Tx agg: STA: %pM tid: %d\n", | 
|  | sta->addr, tid); | 
|  | ret = ieee80211_start_tx_ba_session(sta, tid, 5000); | 
|  | if (ret == -EAGAIN) { | 
|  | /* | 
|  | * driver and mac80211 is out of sync | 
|  | * this might be cause by reloading firmware | 
|  | * stop the tx ba session here | 
|  | */ | 
|  | IWL_ERR(mvm, "Fail start Tx agg on tid: %d\n", | 
|  | tid); | 
|  | ieee80211_stop_tx_ba_session(sta, tid); | 
|  | } | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void rs_tl_turn_on_agg(struct iwl_mvm *mvm, u8 tid, | 
|  | struct iwl_lq_sta *lq_data, | 
|  | struct ieee80211_sta *sta) | 
|  | { | 
|  | if (tid < IWL_MAX_TID_COUNT) | 
|  | rs_tl_turn_on_agg_for_tid(mvm, lq_data, tid, sta); | 
|  | else | 
|  | IWL_ERR(mvm, "tid exceeds max TID count: %d/%d\n", | 
|  | tid, IWL_MAX_TID_COUNT); | 
|  | } | 
|  |  | 
|  | static inline int get_num_of_ant_from_rate(u32 rate_n_flags) | 
|  | { | 
|  | return !!(rate_n_flags & RATE_MCS_ANT_A_MSK) + | 
|  | !!(rate_n_flags & RATE_MCS_ANT_B_MSK) + | 
|  | !!(rate_n_flags & RATE_MCS_ANT_C_MSK); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Static function to get the expected throughput from an iwl_scale_tbl_info | 
|  | * that wraps a NULL pointer check | 
|  | */ | 
|  | static s32 get_expected_tpt(struct iwl_scale_tbl_info *tbl, int rs_index) | 
|  | { | 
|  | if (tbl->expected_tpt) | 
|  | return tbl->expected_tpt[rs_index]; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * rs_collect_tx_data - Update the success/failure sliding window | 
|  | * | 
|  | * We keep a sliding window of the last 62 packets transmitted | 
|  | * at this rate.  window->data contains the bitmask of successful | 
|  | * packets. | 
|  | */ | 
|  | static int _rs_collect_tx_data(struct iwl_mvm *mvm, | 
|  | struct iwl_scale_tbl_info *tbl, | 
|  | int scale_index, int attempts, int successes, | 
|  | struct iwl_rate_scale_data *window) | 
|  | { | 
|  | static const u64 mask = (((u64)1) << (IWL_RATE_MAX_WINDOW - 1)); | 
|  | s32 fail_count, tpt; | 
|  |  | 
|  | /* Get expected throughput */ | 
|  | tpt = get_expected_tpt(tbl, scale_index); | 
|  |  | 
|  | /* | 
|  | * Keep track of only the latest 62 tx frame attempts in this rate's | 
|  | * history window; anything older isn't really relevant any more. | 
|  | * If we have filled up the sliding window, drop the oldest attempt; | 
|  | * if the oldest attempt (highest bit in bitmap) shows "success", | 
|  | * subtract "1" from the success counter (this is the main reason | 
|  | * we keep these bitmaps!). | 
|  | */ | 
|  | while (attempts > 0) { | 
|  | if (window->counter >= IWL_RATE_MAX_WINDOW) { | 
|  | /* remove earliest */ | 
|  | window->counter = IWL_RATE_MAX_WINDOW - 1; | 
|  |  | 
|  | if (window->data & mask) { | 
|  | window->data &= ~mask; | 
|  | window->success_counter--; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Increment frames-attempted counter */ | 
|  | window->counter++; | 
|  |  | 
|  | /* Shift bitmap by one frame to throw away oldest history */ | 
|  | window->data <<= 1; | 
|  |  | 
|  | /* Mark the most recent #successes attempts as successful */ | 
|  | if (successes > 0) { | 
|  | window->success_counter++; | 
|  | window->data |= 0x1; | 
|  | successes--; | 
|  | } | 
|  |  | 
|  | attempts--; | 
|  | } | 
|  |  | 
|  | /* Calculate current success ratio, avoid divide-by-0! */ | 
|  | if (window->counter > 0) | 
|  | window->success_ratio = 128 * (100 * window->success_counter) | 
|  | / window->counter; | 
|  | else | 
|  | window->success_ratio = IWL_INVALID_VALUE; | 
|  |  | 
|  | fail_count = window->counter - window->success_counter; | 
|  |  | 
|  | /* Calculate average throughput, if we have enough history. */ | 
|  | if ((fail_count >= IWL_MVM_RS_RATE_MIN_FAILURE_TH) || | 
|  | (window->success_counter >= IWL_MVM_RS_RATE_MIN_SUCCESS_TH)) | 
|  | window->average_tpt = (window->success_ratio * tpt + 64) / 128; | 
|  | else | 
|  | window->average_tpt = IWL_INVALID_VALUE; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int rs_collect_tpc_data(struct iwl_mvm *mvm, | 
|  | struct iwl_lq_sta *lq_sta, | 
|  | struct iwl_scale_tbl_info *tbl, | 
|  | int scale_index, int attempts, int successes, | 
|  | u8 reduced_txp) | 
|  | { | 
|  | struct iwl_rate_scale_data *window = NULL; | 
|  |  | 
|  | if (WARN_ON_ONCE(reduced_txp > TPC_MAX_REDUCTION)) | 
|  | return -EINVAL; | 
|  |  | 
|  | window = &tbl->tpc_win[reduced_txp]; | 
|  | return  _rs_collect_tx_data(mvm, tbl, scale_index, attempts, successes, | 
|  | window); | 
|  | } | 
|  |  | 
|  | static int rs_collect_tlc_data(struct iwl_mvm *mvm, | 
|  | struct iwl_lq_sta *lq_sta, | 
|  | struct iwl_scale_tbl_info *tbl, | 
|  | int scale_index, int attempts, int successes) | 
|  | { | 
|  | struct iwl_rate_scale_data *window = NULL; | 
|  |  | 
|  | if (scale_index < 0 || scale_index >= IWL_RATE_COUNT) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (tbl->column != RS_COLUMN_INVALID) { | 
|  | struct lq_sta_pers *pers = &lq_sta->pers; | 
|  |  | 
|  | pers->tx_stats[tbl->column][scale_index].total += attempts; | 
|  | pers->tx_stats[tbl->column][scale_index].success += successes; | 
|  | } | 
|  |  | 
|  | /* Select window for current tx bit rate */ | 
|  | window = &(tbl->win[scale_index]); | 
|  | return _rs_collect_tx_data(mvm, tbl, scale_index, attempts, successes, | 
|  | window); | 
|  | } | 
|  |  | 
|  | /* Convert rs_rate object into ucode rate bitmask */ | 
|  | static u32 ucode_rate_from_rs_rate(struct iwl_mvm *mvm, | 
|  | struct rs_rate *rate) | 
|  | { | 
|  | u32 ucode_rate = 0; | 
|  | int index = rate->index; | 
|  |  | 
|  | ucode_rate |= ((rate->ant << RATE_MCS_ANT_POS) & | 
|  | RATE_MCS_ANT_ABC_MSK); | 
|  |  | 
|  | if (is_legacy(rate)) { | 
|  | ucode_rate |= iwl_rates[index].plcp; | 
|  | if (index >= IWL_FIRST_CCK_RATE && index <= IWL_LAST_CCK_RATE) | 
|  | ucode_rate |= RATE_MCS_CCK_MSK; | 
|  | return ucode_rate; | 
|  | } | 
|  |  | 
|  | if (is_ht(rate)) { | 
|  | if (index < IWL_FIRST_HT_RATE || index > IWL_LAST_HT_RATE) { | 
|  | IWL_ERR(mvm, "Invalid HT rate index %d\n", index); | 
|  | index = IWL_LAST_HT_RATE; | 
|  | } | 
|  | ucode_rate |= RATE_MCS_HT_MSK; | 
|  |  | 
|  | if (is_ht_siso(rate)) | 
|  | ucode_rate |= iwl_rates[index].plcp_ht_siso; | 
|  | else if (is_ht_mimo2(rate)) | 
|  | ucode_rate |= iwl_rates[index].plcp_ht_mimo2; | 
|  | else | 
|  | WARN_ON_ONCE(1); | 
|  | } else if (is_vht(rate)) { | 
|  | if (index < IWL_FIRST_VHT_RATE || index > IWL_LAST_VHT_RATE) { | 
|  | IWL_ERR(mvm, "Invalid VHT rate index %d\n", index); | 
|  | index = IWL_LAST_VHT_RATE; | 
|  | } | 
|  | ucode_rate |= RATE_MCS_VHT_MSK; | 
|  | if (is_vht_siso(rate)) | 
|  | ucode_rate |= iwl_rates[index].plcp_vht_siso; | 
|  | else if (is_vht_mimo2(rate)) | 
|  | ucode_rate |= iwl_rates[index].plcp_vht_mimo2; | 
|  | else | 
|  | WARN_ON_ONCE(1); | 
|  |  | 
|  | } else { | 
|  | IWL_ERR(mvm, "Invalid rate->type %d\n", rate->type); | 
|  | } | 
|  |  | 
|  | if (is_siso(rate) && rate->stbc) { | 
|  | /* To enable STBC we need to set both a flag and ANT_AB */ | 
|  | ucode_rate |= RATE_MCS_ANT_AB_MSK; | 
|  | ucode_rate |= RATE_MCS_VHT_STBC_MSK; | 
|  | } | 
|  |  | 
|  | ucode_rate |= rate->bw; | 
|  | if (rate->sgi) | 
|  | ucode_rate |= RATE_MCS_SGI_MSK; | 
|  | if (rate->ldpc) | 
|  | ucode_rate |= RATE_MCS_LDPC_MSK; | 
|  |  | 
|  | return ucode_rate; | 
|  | } | 
|  |  | 
|  | /* Convert a ucode rate into an rs_rate object */ | 
|  | static int rs_rate_from_ucode_rate(const u32 ucode_rate, | 
|  | enum nl80211_band band, | 
|  | struct rs_rate *rate) | 
|  | { | 
|  | u32 ant_msk = ucode_rate & RATE_MCS_ANT_ABC_MSK; | 
|  | u8 num_of_ant = get_num_of_ant_from_rate(ucode_rate); | 
|  | u8 nss; | 
|  |  | 
|  | memset(rate, 0, sizeof(*rate)); | 
|  | rate->index = iwl_hwrate_to_plcp_idx(ucode_rate); | 
|  |  | 
|  | if (rate->index == IWL_RATE_INVALID) | 
|  | return -EINVAL; | 
|  |  | 
|  | rate->ant = (ant_msk >> RATE_MCS_ANT_POS); | 
|  |  | 
|  | /* Legacy */ | 
|  | if (!(ucode_rate & RATE_MCS_HT_MSK) && | 
|  | !(ucode_rate & RATE_MCS_VHT_MSK)) { | 
|  | if (num_of_ant == 1) { | 
|  | if (band == NL80211_BAND_5GHZ) | 
|  | rate->type = LQ_LEGACY_A; | 
|  | else | 
|  | rate->type = LQ_LEGACY_G; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* HT or VHT */ | 
|  | if (ucode_rate & RATE_MCS_SGI_MSK) | 
|  | rate->sgi = true; | 
|  | if (ucode_rate & RATE_MCS_LDPC_MSK) | 
|  | rate->ldpc = true; | 
|  | if (ucode_rate & RATE_MCS_VHT_STBC_MSK) | 
|  | rate->stbc = true; | 
|  | if (ucode_rate & RATE_MCS_BF_MSK) | 
|  | rate->bfer = true; | 
|  |  | 
|  | rate->bw = ucode_rate & RATE_MCS_CHAN_WIDTH_MSK; | 
|  |  | 
|  | if (ucode_rate & RATE_MCS_HT_MSK) { | 
|  | nss = ((ucode_rate & RATE_HT_MCS_NSS_MSK) >> | 
|  | RATE_HT_MCS_NSS_POS) + 1; | 
|  |  | 
|  | if (nss == 1) { | 
|  | rate->type = LQ_HT_SISO; | 
|  | WARN_ONCE(!rate->stbc && !rate->bfer && num_of_ant != 1, | 
|  | "stbc %d bfer %d", | 
|  | rate->stbc, rate->bfer); | 
|  | } else if (nss == 2) { | 
|  | rate->type = LQ_HT_MIMO2; | 
|  | WARN_ON_ONCE(num_of_ant != 2); | 
|  | } else { | 
|  | WARN_ON_ONCE(1); | 
|  | } | 
|  | } else if (ucode_rate & RATE_MCS_VHT_MSK) { | 
|  | nss = ((ucode_rate & RATE_VHT_MCS_NSS_MSK) >> | 
|  | RATE_VHT_MCS_NSS_POS) + 1; | 
|  |  | 
|  | if (nss == 1) { | 
|  | rate->type = LQ_VHT_SISO; | 
|  | WARN_ONCE(!rate->stbc && !rate->bfer && num_of_ant != 1, | 
|  | "stbc %d bfer %d", | 
|  | rate->stbc, rate->bfer); | 
|  | } else if (nss == 2) { | 
|  | rate->type = LQ_VHT_MIMO2; | 
|  | WARN_ON_ONCE(num_of_ant != 2); | 
|  | } else { | 
|  | WARN_ON_ONCE(1); | 
|  | } | 
|  | } | 
|  |  | 
|  | WARN_ON_ONCE(rate->bw == RATE_MCS_CHAN_WIDTH_80 && | 
|  | !is_vht(rate)); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* switch to another antenna/antennas and return 1 */ | 
|  | /* if no other valid antenna found, return 0 */ | 
|  | static int rs_toggle_antenna(u32 valid_ant, struct rs_rate *rate) | 
|  | { | 
|  | u8 new_ant_type; | 
|  |  | 
|  | if (!rate->ant || rate->ant > ANT_ABC) | 
|  | return 0; | 
|  |  | 
|  | if (!rs_is_valid_ant(valid_ant, rate->ant)) | 
|  | return 0; | 
|  |  | 
|  | new_ant_type = ant_toggle_lookup[rate->ant]; | 
|  |  | 
|  | while ((new_ant_type != rate->ant) && | 
|  | !rs_is_valid_ant(valid_ant, new_ant_type)) | 
|  | new_ant_type = ant_toggle_lookup[new_ant_type]; | 
|  |  | 
|  | if (new_ant_type == rate->ant) | 
|  | return 0; | 
|  |  | 
|  | rate->ant = new_ant_type; | 
|  |  | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | static u16 rs_get_supported_rates(struct iwl_lq_sta *lq_sta, | 
|  | struct rs_rate *rate) | 
|  | { | 
|  | if (is_legacy(rate)) | 
|  | return lq_sta->active_legacy_rate; | 
|  | else if (is_siso(rate)) | 
|  | return lq_sta->active_siso_rate; | 
|  | else if (is_mimo2(rate)) | 
|  | return lq_sta->active_mimo2_rate; | 
|  |  | 
|  | WARN_ON_ONCE(1); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static u16 rs_get_adjacent_rate(struct iwl_mvm *mvm, u8 index, u16 rate_mask, | 
|  | int rate_type) | 
|  | { | 
|  | u8 high = IWL_RATE_INVALID; | 
|  | u8 low = IWL_RATE_INVALID; | 
|  |  | 
|  | /* 802.11A or ht walks to the next literal adjacent rate in | 
|  | * the rate table */ | 
|  | if (is_type_a_band(rate_type) || !is_type_legacy(rate_type)) { | 
|  | int i; | 
|  | u32 mask; | 
|  |  | 
|  | /* Find the previous rate that is in the rate mask */ | 
|  | i = index - 1; | 
|  | for (mask = (1 << i); i >= 0; i--, mask >>= 1) { | 
|  | if (rate_mask & mask) { | 
|  | low = i; | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Find the next rate that is in the rate mask */ | 
|  | i = index + 1; | 
|  | for (mask = (1 << i); i < IWL_RATE_COUNT; i++, mask <<= 1) { | 
|  | if (rate_mask & mask) { | 
|  | high = i; | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | return (high << 8) | low; | 
|  | } | 
|  |  | 
|  | low = index; | 
|  | while (low != IWL_RATE_INVALID) { | 
|  | low = iwl_rates[low].prev_rs; | 
|  | if (low == IWL_RATE_INVALID) | 
|  | break; | 
|  | if (rate_mask & (1 << low)) | 
|  | break; | 
|  | } | 
|  |  | 
|  | high = index; | 
|  | while (high != IWL_RATE_INVALID) { | 
|  | high = iwl_rates[high].next_rs; | 
|  | if (high == IWL_RATE_INVALID) | 
|  | break; | 
|  | if (rate_mask & (1 << high)) | 
|  | break; | 
|  | } | 
|  |  | 
|  | return (high << 8) | low; | 
|  | } | 
|  |  | 
|  | static inline bool rs_rate_supported(struct iwl_lq_sta *lq_sta, | 
|  | struct rs_rate *rate) | 
|  | { | 
|  | return BIT(rate->index) & rs_get_supported_rates(lq_sta, rate); | 
|  | } | 
|  |  | 
|  | /* Get the next supported lower rate in the current column. | 
|  | * Return true if bottom rate in the current column was reached | 
|  | */ | 
|  | static bool rs_get_lower_rate_in_column(struct iwl_lq_sta *lq_sta, | 
|  | struct rs_rate *rate) | 
|  | { | 
|  | u8 low; | 
|  | u16 high_low; | 
|  | u16 rate_mask; | 
|  | struct iwl_mvm *mvm = lq_sta->pers.drv; | 
|  |  | 
|  | rate_mask = rs_get_supported_rates(lq_sta, rate); | 
|  | high_low = rs_get_adjacent_rate(mvm, rate->index, rate_mask, | 
|  | rate->type); | 
|  | low = high_low & 0xff; | 
|  |  | 
|  | /* Bottom rate of column reached */ | 
|  | if (low == IWL_RATE_INVALID) | 
|  | return true; | 
|  |  | 
|  | rate->index = low; | 
|  | return false; | 
|  | } | 
|  |  | 
|  | /* Get the next rate to use following a column downgrade */ | 
|  | static void rs_get_lower_rate_down_column(struct iwl_lq_sta *lq_sta, | 
|  | struct rs_rate *rate) | 
|  | { | 
|  | struct iwl_mvm *mvm = lq_sta->pers.drv; | 
|  |  | 
|  | if (is_legacy(rate)) { | 
|  | /* No column to downgrade from Legacy */ | 
|  | return; | 
|  | } else if (is_siso(rate)) { | 
|  | /* Downgrade to Legacy if we were in SISO */ | 
|  | if (lq_sta->band == NL80211_BAND_5GHZ) | 
|  | rate->type = LQ_LEGACY_A; | 
|  | else | 
|  | rate->type = LQ_LEGACY_G; | 
|  |  | 
|  | rate->bw = RATE_MCS_CHAN_WIDTH_20; | 
|  |  | 
|  | WARN_ON_ONCE(rate->index < IWL_RATE_MCS_0_INDEX || | 
|  | rate->index > IWL_RATE_MCS_9_INDEX); | 
|  |  | 
|  | rate->index = rs_ht_to_legacy[rate->index]; | 
|  | rate->ldpc = false; | 
|  | } else { | 
|  | /* Downgrade to SISO with same MCS if in MIMO  */ | 
|  | rate->type = is_vht_mimo2(rate) ? | 
|  | LQ_VHT_SISO : LQ_HT_SISO; | 
|  | } | 
|  |  | 
|  | if (num_of_ant(rate->ant) > 1) | 
|  | rate->ant = first_antenna(iwl_mvm_get_valid_tx_ant(mvm)); | 
|  |  | 
|  | /* Relevant in both switching to SISO or Legacy */ | 
|  | rate->sgi = false; | 
|  |  | 
|  | if (!rs_rate_supported(lq_sta, rate)) | 
|  | rs_get_lower_rate_in_column(lq_sta, rate); | 
|  | } | 
|  |  | 
|  | /* Check if both rates are identical | 
|  | * allow_ant_mismatch enables matching a SISO rate on ANT_A or ANT_B | 
|  | * with a rate indicating STBC/BFER and ANT_AB. | 
|  | */ | 
|  | static inline bool rs_rate_equal(struct rs_rate *a, | 
|  | struct rs_rate *b, | 
|  | bool allow_ant_mismatch) | 
|  |  | 
|  | { | 
|  | bool ant_match = (a->ant == b->ant) && (a->stbc == b->stbc) && | 
|  | (a->bfer == b->bfer); | 
|  |  | 
|  | if (allow_ant_mismatch) { | 
|  | if (a->stbc || a->bfer) { | 
|  | WARN_ONCE(a->ant != ANT_AB, "stbc %d bfer %d ant %d", | 
|  | a->stbc, a->bfer, a->ant); | 
|  | ant_match |= (b->ant == ANT_A || b->ant == ANT_B); | 
|  | } else if (b->stbc || b->bfer) { | 
|  | WARN_ONCE(b->ant != ANT_AB, "stbc %d bfer %d ant %d", | 
|  | b->stbc, b->bfer, b->ant); | 
|  | ant_match |= (a->ant == ANT_A || a->ant == ANT_B); | 
|  | } | 
|  | } | 
|  |  | 
|  | return (a->type == b->type) && (a->bw == b->bw) && (a->sgi == b->sgi) && | 
|  | (a->ldpc == b->ldpc) && (a->index == b->index) && ant_match; | 
|  | } | 
|  |  | 
|  | /* Check if both rates share the same column */ | 
|  | static inline bool rs_rate_column_match(struct rs_rate *a, | 
|  | struct rs_rate *b) | 
|  | { | 
|  | bool ant_match; | 
|  |  | 
|  | if (a->stbc || a->bfer) | 
|  | ant_match = (b->ant == ANT_A || b->ant == ANT_B); | 
|  | else | 
|  | ant_match = (a->ant == b->ant); | 
|  |  | 
|  | return (a->type == b->type) && (a->bw == b->bw) && (a->sgi == b->sgi) | 
|  | && ant_match; | 
|  | } | 
|  |  | 
|  | static inline enum rs_column rs_get_column_from_rate(struct rs_rate *rate) | 
|  | { | 
|  | if (is_legacy(rate)) { | 
|  | if (rate->ant == ANT_A) | 
|  | return RS_COLUMN_LEGACY_ANT_A; | 
|  |  | 
|  | if (rate->ant == ANT_B) | 
|  | return RS_COLUMN_LEGACY_ANT_B; | 
|  |  | 
|  | goto err; | 
|  | } | 
|  |  | 
|  | if (is_siso(rate)) { | 
|  | if (rate->ant == ANT_A || rate->stbc || rate->bfer) | 
|  | return rate->sgi ? RS_COLUMN_SISO_ANT_A_SGI : | 
|  | RS_COLUMN_SISO_ANT_A; | 
|  |  | 
|  | if (rate->ant == ANT_B) | 
|  | return rate->sgi ? RS_COLUMN_SISO_ANT_B_SGI : | 
|  | RS_COLUMN_SISO_ANT_B; | 
|  |  | 
|  | goto err; | 
|  | } | 
|  |  | 
|  | if (is_mimo(rate)) | 
|  | return rate->sgi ? RS_COLUMN_MIMO2_SGI : RS_COLUMN_MIMO2; | 
|  |  | 
|  | err: | 
|  | return RS_COLUMN_INVALID; | 
|  | } | 
|  |  | 
|  | static u8 rs_get_tid(struct ieee80211_hdr *hdr) | 
|  | { | 
|  | u8 tid = IWL_MAX_TID_COUNT; | 
|  |  | 
|  | if (ieee80211_is_data_qos(hdr->frame_control)) { | 
|  | u8 *qc = ieee80211_get_qos_ctl(hdr); | 
|  | tid = qc[0] & 0xf; | 
|  | } | 
|  |  | 
|  | if (unlikely(tid > IWL_MAX_TID_COUNT)) | 
|  | tid = IWL_MAX_TID_COUNT; | 
|  |  | 
|  | return tid; | 
|  | } | 
|  |  | 
|  | void iwl_mvm_rs_tx_status(struct iwl_mvm *mvm, struct ieee80211_sta *sta, | 
|  | int tid, struct ieee80211_tx_info *info, bool ndp) | 
|  | { | 
|  | int legacy_success; | 
|  | int retries; | 
|  | int i; | 
|  | struct iwl_lq_cmd *table; | 
|  | u32 lq_hwrate; | 
|  | struct rs_rate lq_rate, tx_resp_rate; | 
|  | struct iwl_scale_tbl_info *curr_tbl, *other_tbl, *tmp_tbl; | 
|  | u8 reduced_txp = (uintptr_t)info->status.status_driver_data[0]; | 
|  | u32 tx_resp_hwrate = (uintptr_t)info->status.status_driver_data[1]; | 
|  | struct iwl_mvm_sta *mvmsta = iwl_mvm_sta_from_mac80211(sta); | 
|  | struct iwl_lq_sta *lq_sta = &mvmsta->lq_sta; | 
|  | bool allow_ant_mismatch = fw_has_api(&mvm->fw->ucode_capa, | 
|  | IWL_UCODE_TLV_API_LQ_SS_PARAMS); | 
|  |  | 
|  | /* Treat uninitialized rate scaling data same as non-existing. */ | 
|  | if (!lq_sta) { | 
|  | IWL_DEBUG_RATE(mvm, "Station rate scaling not created yet.\n"); | 
|  | return; | 
|  | } else if (!lq_sta->pers.drv) { | 
|  | IWL_DEBUG_RATE(mvm, "Rate scaling not initialized yet.\n"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* This packet was aggregated but doesn't carry status info */ | 
|  | if ((info->flags & IEEE80211_TX_CTL_AMPDU) && | 
|  | !(info->flags & IEEE80211_TX_STAT_AMPDU)) | 
|  | return; | 
|  |  | 
|  | rs_rate_from_ucode_rate(tx_resp_hwrate, info->band, &tx_resp_rate); | 
|  |  | 
|  | #ifdef CONFIG_MAC80211_DEBUGFS | 
|  | /* Disable last tx check if we are debugging with fixed rate but | 
|  | * update tx stats */ | 
|  | if (lq_sta->pers.dbg_fixed_rate) { | 
|  | int index = tx_resp_rate.index; | 
|  | enum rs_column column; | 
|  | int attempts, success; | 
|  |  | 
|  | column = rs_get_column_from_rate(&tx_resp_rate); | 
|  | if (WARN_ONCE(column == RS_COLUMN_INVALID, | 
|  | "Can't map rate 0x%x to column", | 
|  | tx_resp_hwrate)) | 
|  | return; | 
|  |  | 
|  | if (info->flags & IEEE80211_TX_STAT_AMPDU) { | 
|  | attempts = info->status.ampdu_len; | 
|  | success = info->status.ampdu_ack_len; | 
|  | } else { | 
|  | attempts = info->status.rates[0].count; | 
|  | success = !!(info->flags & IEEE80211_TX_STAT_ACK); | 
|  | } | 
|  |  | 
|  | lq_sta->pers.tx_stats[column][index].total += attempts; | 
|  | lq_sta->pers.tx_stats[column][index].success += success; | 
|  |  | 
|  | IWL_DEBUG_RATE(mvm, "Fixed rate 0x%x success %d attempts %d\n", | 
|  | tx_resp_hwrate, success, attempts); | 
|  | return; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | if (time_after(jiffies, | 
|  | (unsigned long)(lq_sta->last_tx + | 
|  | (IWL_MVM_RS_IDLE_TIMEOUT * HZ)))) { | 
|  | int t; | 
|  |  | 
|  | IWL_DEBUG_RATE(mvm, "Tx idle for too long. reinit rs\n"); | 
|  | for (t = 0; t < IWL_MAX_TID_COUNT; t++) | 
|  | ieee80211_stop_tx_ba_session(sta, t); | 
|  |  | 
|  | iwl_mvm_rs_rate_init(mvm, sta, info->band, false); | 
|  | return; | 
|  | } | 
|  | lq_sta->last_tx = jiffies; | 
|  |  | 
|  | /* Ignore this Tx frame response if its initial rate doesn't match | 
|  | * that of latest Link Quality command.  There may be stragglers | 
|  | * from a previous Link Quality command, but we're no longer interested | 
|  | * in those; they're either from the "active" mode while we're trying | 
|  | * to check "search" mode, or a prior "search" mode after we've moved | 
|  | * to a new "search" mode (which might become the new "active" mode). | 
|  | */ | 
|  | table = &lq_sta->lq; | 
|  | lq_hwrate = le32_to_cpu(table->rs_table[0]); | 
|  | rs_rate_from_ucode_rate(lq_hwrate, info->band, &lq_rate); | 
|  |  | 
|  | /* Here we actually compare this rate to the latest LQ command */ | 
|  | if (!rs_rate_equal(&tx_resp_rate, &lq_rate, allow_ant_mismatch)) { | 
|  | IWL_DEBUG_RATE(mvm, | 
|  | "initial tx resp rate 0x%x does not match 0x%x\n", | 
|  | tx_resp_hwrate, lq_hwrate); | 
|  |  | 
|  | /* | 
|  | * Since rates mis-match, the last LQ command may have failed. | 
|  | * After IWL_MISSED_RATE_MAX mis-matches, resync the uCode with | 
|  | * ... driver. | 
|  | */ | 
|  | lq_sta->missed_rate_counter++; | 
|  | if (lq_sta->missed_rate_counter > IWL_MVM_RS_MISSED_RATE_MAX) { | 
|  | lq_sta->missed_rate_counter = 0; | 
|  | IWL_DEBUG_RATE(mvm, | 
|  | "Too many rates mismatch. Send sync LQ. rs_state %d\n", | 
|  | lq_sta->rs_state); | 
|  | iwl_mvm_send_lq_cmd(mvm, &lq_sta->lq, false); | 
|  | } | 
|  | /* Regardless, ignore this status info for outdated rate */ | 
|  | return; | 
|  | } else | 
|  | /* Rate did match, so reset the missed_rate_counter */ | 
|  | lq_sta->missed_rate_counter = 0; | 
|  |  | 
|  | if (!lq_sta->search_better_tbl) { | 
|  | curr_tbl = &(lq_sta->lq_info[lq_sta->active_tbl]); | 
|  | other_tbl = &(lq_sta->lq_info[1 - lq_sta->active_tbl]); | 
|  | } else { | 
|  | curr_tbl = &(lq_sta->lq_info[1 - lq_sta->active_tbl]); | 
|  | other_tbl = &(lq_sta->lq_info[lq_sta->active_tbl]); | 
|  | } | 
|  |  | 
|  | if (WARN_ON_ONCE(!rs_rate_column_match(&lq_rate, &curr_tbl->rate))) { | 
|  | IWL_DEBUG_RATE(mvm, | 
|  | "Neither active nor search matches tx rate\n"); | 
|  | tmp_tbl = &(lq_sta->lq_info[lq_sta->active_tbl]); | 
|  | rs_dump_rate(mvm, &tmp_tbl->rate, "ACTIVE"); | 
|  | tmp_tbl = &(lq_sta->lq_info[1 - lq_sta->active_tbl]); | 
|  | rs_dump_rate(mvm, &tmp_tbl->rate, "SEARCH"); | 
|  | rs_dump_rate(mvm, &lq_rate, "ACTUAL"); | 
|  |  | 
|  | /* | 
|  | * no matching table found, let's by-pass the data collection | 
|  | * and continue to perform rate scale to find the rate table | 
|  | */ | 
|  | rs_stay_in_table(lq_sta, true); | 
|  | goto done; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Updating the frame history depends on whether packets were | 
|  | * aggregated. | 
|  | * | 
|  | * For aggregation, all packets were transmitted at the same rate, the | 
|  | * first index into rate scale table. | 
|  | */ | 
|  | if (info->flags & IEEE80211_TX_STAT_AMPDU) { | 
|  | rs_collect_tpc_data(mvm, lq_sta, curr_tbl, lq_rate.index, | 
|  | info->status.ampdu_len, | 
|  | info->status.ampdu_ack_len, | 
|  | reduced_txp); | 
|  |  | 
|  | /* ampdu_ack_len = 0 marks no BA was received. For TLC, treat | 
|  | * it as a single frame loss as we don't want the success ratio | 
|  | * to dip too quickly because a BA wasn't received. | 
|  | * For TPC, there's no need for this optimisation since we want | 
|  | * to recover very quickly from a bad power reduction and, | 
|  | * therefore we'd like the success ratio to get an immediate hit | 
|  | * when failing to get a BA, so we'd switch back to a lower or | 
|  | * zero power reduction. When FW transmits agg with a rate | 
|  | * different from the initial rate, it will not use reduced txp | 
|  | * and will send BA notification twice (one empty with reduced | 
|  | * txp equal to the value from LQ and one with reduced txp 0). | 
|  | * We need to update counters for each txp level accordingly. | 
|  | */ | 
|  | if (info->status.ampdu_ack_len == 0) | 
|  | info->status.ampdu_len = 1; | 
|  |  | 
|  | rs_collect_tlc_data(mvm, lq_sta, curr_tbl, lq_rate.index, | 
|  | info->status.ampdu_len, | 
|  | info->status.ampdu_ack_len); | 
|  |  | 
|  | /* Update success/fail counts if not searching for new mode */ | 
|  | if (lq_sta->rs_state == RS_STATE_STAY_IN_COLUMN) { | 
|  | lq_sta->total_success += info->status.ampdu_ack_len; | 
|  | lq_sta->total_failed += (info->status.ampdu_len - | 
|  | info->status.ampdu_ack_len); | 
|  | } | 
|  | } else { | 
|  | /* For legacy, update frame history with for each Tx retry. */ | 
|  | retries = info->status.rates[0].count - 1; | 
|  | /* HW doesn't send more than 15 retries */ | 
|  | retries = min(retries, 15); | 
|  |  | 
|  | /* The last transmission may have been successful */ | 
|  | legacy_success = !!(info->flags & IEEE80211_TX_STAT_ACK); | 
|  | /* Collect data for each rate used during failed TX attempts */ | 
|  | for (i = 0; i <= retries; ++i) { | 
|  | lq_hwrate = le32_to_cpu(table->rs_table[i]); | 
|  | rs_rate_from_ucode_rate(lq_hwrate, info->band, | 
|  | &lq_rate); | 
|  | /* | 
|  | * Only collect stats if retried rate is in the same RS | 
|  | * table as active/search. | 
|  | */ | 
|  | if (rs_rate_column_match(&lq_rate, &curr_tbl->rate)) | 
|  | tmp_tbl = curr_tbl; | 
|  | else if (rs_rate_column_match(&lq_rate, | 
|  | &other_tbl->rate)) | 
|  | tmp_tbl = other_tbl; | 
|  | else | 
|  | continue; | 
|  |  | 
|  | rs_collect_tpc_data(mvm, lq_sta, tmp_tbl, | 
|  | lq_rate.index, 1, | 
|  | i < retries ? 0 : legacy_success, | 
|  | reduced_txp); | 
|  | rs_collect_tlc_data(mvm, lq_sta, tmp_tbl, | 
|  | lq_rate.index, 1, | 
|  | i < retries ? 0 : legacy_success); | 
|  | } | 
|  |  | 
|  | /* Update success/fail counts if not searching for new mode */ | 
|  | if (lq_sta->rs_state == RS_STATE_STAY_IN_COLUMN) { | 
|  | lq_sta->total_success += legacy_success; | 
|  | lq_sta->total_failed += retries + (1 - legacy_success); | 
|  | } | 
|  | } | 
|  | /* The last TX rate is cached in lq_sta; it's set in if/else above */ | 
|  | lq_sta->last_rate_n_flags = lq_hwrate; | 
|  | IWL_DEBUG_RATE(mvm, "reduced txpower: %d\n", reduced_txp); | 
|  | done: | 
|  | /* See if there's a better rate or modulation mode to try. */ | 
|  | if (sta->supp_rates[info->band]) | 
|  | rs_rate_scale_perform(mvm, sta, lq_sta, tid, ndp); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * mac80211 sends us Tx status | 
|  | */ | 
|  | static void rs_mac80211_tx_status(void *mvm_r, | 
|  | struct ieee80211_supported_band *sband, | 
|  | struct ieee80211_sta *sta, void *priv_sta, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; | 
|  | struct iwl_op_mode *op_mode = (struct iwl_op_mode *)mvm_r; | 
|  | struct iwl_mvm *mvm = IWL_OP_MODE_GET_MVM(op_mode); | 
|  | struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); | 
|  |  | 
|  | if (!iwl_mvm_sta_from_mac80211(sta)->vif) | 
|  | return; | 
|  |  | 
|  | if (!ieee80211_is_data(hdr->frame_control) || | 
|  | info->flags & IEEE80211_TX_CTL_NO_ACK) | 
|  | return; | 
|  |  | 
|  | iwl_mvm_rs_tx_status(mvm, sta, rs_get_tid(hdr), info, | 
|  | ieee80211_is_qos_nullfunc(hdr->frame_control)); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Begin a period of staying with a selected modulation mode. | 
|  | * Set "stay_in_tbl" flag to prevent any mode switches. | 
|  | * Set frame tx success limits according to legacy vs. high-throughput, | 
|  | * and reset overall (spanning all rates) tx success history statistics. | 
|  | * These control how long we stay using same modulation mode before | 
|  | * searching for a new mode. | 
|  | */ | 
|  | static void rs_set_stay_in_table(struct iwl_mvm *mvm, u8 is_legacy, | 
|  | struct iwl_lq_sta *lq_sta) | 
|  | { | 
|  | IWL_DEBUG_RATE(mvm, "Moving to RS_STATE_STAY_IN_COLUMN\n"); | 
|  | lq_sta->rs_state = RS_STATE_STAY_IN_COLUMN; | 
|  | if (is_legacy) { | 
|  | lq_sta->table_count_limit = IWL_MVM_RS_LEGACY_TABLE_COUNT; | 
|  | lq_sta->max_failure_limit = IWL_MVM_RS_LEGACY_FAILURE_LIMIT; | 
|  | lq_sta->max_success_limit = IWL_MVM_RS_LEGACY_SUCCESS_LIMIT; | 
|  | } else { | 
|  | lq_sta->table_count_limit = IWL_MVM_RS_NON_LEGACY_TABLE_COUNT; | 
|  | lq_sta->max_failure_limit = IWL_MVM_RS_NON_LEGACY_FAILURE_LIMIT; | 
|  | lq_sta->max_success_limit = IWL_MVM_RS_NON_LEGACY_SUCCESS_LIMIT; | 
|  | } | 
|  | lq_sta->table_count = 0; | 
|  | lq_sta->total_failed = 0; | 
|  | lq_sta->total_success = 0; | 
|  | lq_sta->flush_timer = jiffies; | 
|  | lq_sta->visited_columns = 0; | 
|  | } | 
|  |  | 
|  | static inline int rs_get_max_rate_from_mask(unsigned long rate_mask) | 
|  | { | 
|  | if (rate_mask) | 
|  | return find_last_bit(&rate_mask, BITS_PER_LONG); | 
|  | return IWL_RATE_INVALID; | 
|  | } | 
|  |  | 
|  | static int rs_get_max_allowed_rate(struct iwl_lq_sta *lq_sta, | 
|  | const struct rs_tx_column *column) | 
|  | { | 
|  | switch (column->mode) { | 
|  | case RS_LEGACY: | 
|  | return lq_sta->max_legacy_rate_idx; | 
|  | case RS_SISO: | 
|  | return lq_sta->max_siso_rate_idx; | 
|  | case RS_MIMO2: | 
|  | return lq_sta->max_mimo2_rate_idx; | 
|  | default: | 
|  | WARN_ON_ONCE(1); | 
|  | } | 
|  |  | 
|  | return lq_sta->max_legacy_rate_idx; | 
|  | } | 
|  |  | 
|  | static const u16 *rs_get_expected_tpt_table(struct iwl_lq_sta *lq_sta, | 
|  | const struct rs_tx_column *column, | 
|  | u32 bw) | 
|  | { | 
|  | /* Used to choose among HT tables */ | 
|  | const u16 (*ht_tbl_pointer)[IWL_RATE_COUNT]; | 
|  |  | 
|  | if (WARN_ON_ONCE(column->mode != RS_LEGACY && | 
|  | column->mode != RS_SISO && | 
|  | column->mode != RS_MIMO2)) | 
|  | return expected_tpt_legacy; | 
|  |  | 
|  | /* Legacy rates have only one table */ | 
|  | if (column->mode == RS_LEGACY) | 
|  | return expected_tpt_legacy; | 
|  |  | 
|  | ht_tbl_pointer = expected_tpt_mimo2_20MHz; | 
|  | /* Choose among many HT tables depending on number of streams | 
|  | * (SISO/MIMO2), channel width (20/40/80), SGI, and aggregation | 
|  | * status */ | 
|  | if (column->mode == RS_SISO) { | 
|  | switch (bw) { | 
|  | case RATE_MCS_CHAN_WIDTH_20: | 
|  | ht_tbl_pointer = expected_tpt_siso_20MHz; | 
|  | break; | 
|  | case RATE_MCS_CHAN_WIDTH_40: | 
|  | ht_tbl_pointer = expected_tpt_siso_40MHz; | 
|  | break; | 
|  | case RATE_MCS_CHAN_WIDTH_80: | 
|  | ht_tbl_pointer = expected_tpt_siso_80MHz; | 
|  | break; | 
|  | case RATE_MCS_CHAN_WIDTH_160: | 
|  | ht_tbl_pointer = expected_tpt_siso_160MHz; | 
|  | break; | 
|  | default: | 
|  | WARN_ON_ONCE(1); | 
|  | } | 
|  | } else if (column->mode == RS_MIMO2) { | 
|  | switch (bw) { | 
|  | case RATE_MCS_CHAN_WIDTH_20: | 
|  | ht_tbl_pointer = expected_tpt_mimo2_20MHz; | 
|  | break; | 
|  | case RATE_MCS_CHAN_WIDTH_40: | 
|  | ht_tbl_pointer = expected_tpt_mimo2_40MHz; | 
|  | break; | 
|  | case RATE_MCS_CHAN_WIDTH_80: | 
|  | ht_tbl_pointer = expected_tpt_mimo2_80MHz; | 
|  | break; | 
|  | case RATE_MCS_CHAN_WIDTH_160: | 
|  | ht_tbl_pointer = expected_tpt_mimo2_160MHz; | 
|  | break; | 
|  | default: | 
|  | WARN_ON_ONCE(1); | 
|  | } | 
|  | } else { | 
|  | WARN_ON_ONCE(1); | 
|  | } | 
|  |  | 
|  | if (!column->sgi && !lq_sta->is_agg)		/* Normal */ | 
|  | return ht_tbl_pointer[0]; | 
|  | else if (column->sgi && !lq_sta->is_agg)        /* SGI */ | 
|  | return ht_tbl_pointer[1]; | 
|  | else if (!column->sgi && lq_sta->is_agg)        /* AGG */ | 
|  | return ht_tbl_pointer[2]; | 
|  | else						/* AGG+SGI */ | 
|  | return ht_tbl_pointer[3]; | 
|  | } | 
|  |  | 
|  | static void rs_set_expected_tpt_table(struct iwl_lq_sta *lq_sta, | 
|  | struct iwl_scale_tbl_info *tbl) | 
|  | { | 
|  | struct rs_rate *rate = &tbl->rate; | 
|  | const struct rs_tx_column *column = &rs_tx_columns[tbl->column]; | 
|  |  | 
|  | tbl->expected_tpt = rs_get_expected_tpt_table(lq_sta, column, rate->bw); | 
|  | } | 
|  |  | 
|  | static s32 rs_get_best_rate(struct iwl_mvm *mvm, | 
|  | struct iwl_lq_sta *lq_sta, | 
|  | struct iwl_scale_tbl_info *tbl,	/* "search" */ | 
|  | unsigned long rate_mask, s8 index) | 
|  | { | 
|  | struct iwl_scale_tbl_info *active_tbl = | 
|  | &(lq_sta->lq_info[lq_sta->active_tbl]); | 
|  | s32 success_ratio = active_tbl->win[index].success_ratio; | 
|  | u16 expected_current_tpt = active_tbl->expected_tpt[index]; | 
|  | const u16 *tpt_tbl = tbl->expected_tpt; | 
|  | u16 high_low; | 
|  | u32 target_tpt; | 
|  | int rate_idx; | 
|  |  | 
|  | if (success_ratio >= RS_PERCENT(IWL_MVM_RS_SR_NO_DECREASE)) { | 
|  | target_tpt = 100 * expected_current_tpt; | 
|  | IWL_DEBUG_RATE(mvm, | 
|  | "SR %d high. Find rate exceeding EXPECTED_CURRENT %d\n", | 
|  | success_ratio, target_tpt); | 
|  | } else { | 
|  | target_tpt = lq_sta->last_tpt; | 
|  | IWL_DEBUG_RATE(mvm, | 
|  | "SR %d not that good. Find rate exceeding ACTUAL_TPT %d\n", | 
|  | success_ratio, target_tpt); | 
|  | } | 
|  |  | 
|  | rate_idx = find_first_bit(&rate_mask, BITS_PER_LONG); | 
|  |  | 
|  | while (rate_idx != IWL_RATE_INVALID) { | 
|  | if (target_tpt < (100 * tpt_tbl[rate_idx])) | 
|  | break; | 
|  |  | 
|  | high_low = rs_get_adjacent_rate(mvm, rate_idx, rate_mask, | 
|  | tbl->rate.type); | 
|  |  | 
|  | rate_idx = (high_low >> 8) & 0xff; | 
|  | } | 
|  |  | 
|  | IWL_DEBUG_RATE(mvm, "Best rate found %d target_tp %d expected_new %d\n", | 
|  | rate_idx, target_tpt, | 
|  | rate_idx != IWL_RATE_INVALID ? | 
|  | 100 * tpt_tbl[rate_idx] : IWL_INVALID_VALUE); | 
|  |  | 
|  | return rate_idx; | 
|  | } | 
|  |  | 
|  | static u32 rs_bw_from_sta_bw(struct ieee80211_sta *sta) | 
|  | { | 
|  | switch (sta->bandwidth) { | 
|  | case IEEE80211_STA_RX_BW_160: | 
|  | return RATE_MCS_CHAN_WIDTH_160; | 
|  | case IEEE80211_STA_RX_BW_80: | 
|  | return RATE_MCS_CHAN_WIDTH_80; | 
|  | case IEEE80211_STA_RX_BW_40: | 
|  | return RATE_MCS_CHAN_WIDTH_40; | 
|  | case IEEE80211_STA_RX_BW_20: | 
|  | default: | 
|  | return RATE_MCS_CHAN_WIDTH_20; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Check whether we should continue using same modulation mode, or | 
|  | * begin search for a new mode, based on: | 
|  | * 1) # tx successes or failures while using this mode | 
|  | * 2) # times calling this function | 
|  | * 3) elapsed time in this mode (not used, for now) | 
|  | */ | 
|  | static void rs_stay_in_table(struct iwl_lq_sta *lq_sta, bool force_search) | 
|  | { | 
|  | struct iwl_scale_tbl_info *tbl; | 
|  | int active_tbl; | 
|  | int flush_interval_passed = 0; | 
|  | struct iwl_mvm *mvm; | 
|  |  | 
|  | mvm = lq_sta->pers.drv; | 
|  | active_tbl = lq_sta->active_tbl; | 
|  |  | 
|  | tbl = &(lq_sta->lq_info[active_tbl]); | 
|  |  | 
|  | /* If we've been disallowing search, see if we should now allow it */ | 
|  | if (lq_sta->rs_state == RS_STATE_STAY_IN_COLUMN) { | 
|  | /* Elapsed time using current modulation mode */ | 
|  | if (lq_sta->flush_timer) | 
|  | flush_interval_passed = | 
|  | time_after(jiffies, | 
|  | (unsigned long)(lq_sta->flush_timer + | 
|  | (IWL_MVM_RS_STAY_IN_COLUMN_TIMEOUT * HZ))); | 
|  |  | 
|  | /* | 
|  | * Check if we should allow search for new modulation mode. | 
|  | * If many frames have failed or succeeded, or we've used | 
|  | * this same modulation for a long time, allow search, and | 
|  | * reset history stats that keep track of whether we should | 
|  | * allow a new search.  Also (below) reset all bitmaps and | 
|  | * stats in active history. | 
|  | */ | 
|  | if (force_search || | 
|  | (lq_sta->total_failed > lq_sta->max_failure_limit) || | 
|  | (lq_sta->total_success > lq_sta->max_success_limit) || | 
|  | ((!lq_sta->search_better_tbl) && | 
|  | (lq_sta->flush_timer) && (flush_interval_passed))) { | 
|  | IWL_DEBUG_RATE(mvm, | 
|  | "LQ: stay is expired %d %d %d\n", | 
|  | lq_sta->total_failed, | 
|  | lq_sta->total_success, | 
|  | flush_interval_passed); | 
|  |  | 
|  | /* Allow search for new mode */ | 
|  | lq_sta->rs_state = RS_STATE_SEARCH_CYCLE_STARTED; | 
|  | IWL_DEBUG_RATE(mvm, | 
|  | "Moving to RS_STATE_SEARCH_CYCLE_STARTED\n"); | 
|  | lq_sta->total_failed = 0; | 
|  | lq_sta->total_success = 0; | 
|  | lq_sta->flush_timer = 0; | 
|  | /* mark the current column as visited */ | 
|  | lq_sta->visited_columns = BIT(tbl->column); | 
|  | /* | 
|  | * Else if we've used this modulation mode enough repetitions | 
|  | * (regardless of elapsed time or success/failure), reset | 
|  | * history bitmaps and rate-specific stats for all rates in | 
|  | * active table. | 
|  | */ | 
|  | } else { | 
|  | lq_sta->table_count++; | 
|  | if (lq_sta->table_count >= | 
|  | lq_sta->table_count_limit) { | 
|  | lq_sta->table_count = 0; | 
|  |  | 
|  | IWL_DEBUG_RATE(mvm, | 
|  | "LQ: stay in table clear win\n"); | 
|  | rs_rate_scale_clear_tbl_windows(mvm, tbl); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* If transitioning to allow "search", reset all history | 
|  | * bitmaps and stats in active table (this will become the new | 
|  | * "search" table). */ | 
|  | if (lq_sta->rs_state == RS_STATE_SEARCH_CYCLE_STARTED) { | 
|  | rs_rate_scale_clear_tbl_windows(mvm, tbl); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | static void rs_set_amsdu_len(struct iwl_mvm *mvm, struct ieee80211_sta *sta, | 
|  | struct iwl_scale_tbl_info *tbl, | 
|  | enum rs_action scale_action) | 
|  | { | 
|  | struct iwl_mvm_sta *sta_priv = iwl_mvm_sta_from_mac80211(sta); | 
|  |  | 
|  | if ((!is_vht(&tbl->rate) && !is_ht(&tbl->rate)) || | 
|  | tbl->rate.index < IWL_RATE_MCS_5_INDEX || | 
|  | scale_action == RS_ACTION_DOWNSCALE) | 
|  | sta_priv->tlc_amsdu = false; | 
|  | else | 
|  | sta_priv->tlc_amsdu = true; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * setup rate table in uCode | 
|  | */ | 
|  | static void rs_update_rate_tbl(struct iwl_mvm *mvm, | 
|  | struct ieee80211_sta *sta, | 
|  | struct iwl_lq_sta *lq_sta, | 
|  | struct iwl_scale_tbl_info *tbl) | 
|  | { | 
|  | rs_fill_lq_cmd(mvm, sta, lq_sta, &tbl->rate); | 
|  | iwl_mvm_send_lq_cmd(mvm, &lq_sta->lq, false); | 
|  | } | 
|  |  | 
|  | static bool rs_tweak_rate_tbl(struct iwl_mvm *mvm, | 
|  | struct ieee80211_sta *sta, | 
|  | struct iwl_lq_sta *lq_sta, | 
|  | struct iwl_scale_tbl_info *tbl, | 
|  | enum rs_action scale_action) | 
|  | { | 
|  | if (sta->bandwidth != IEEE80211_STA_RX_BW_80) | 
|  | return false; | 
|  |  | 
|  | if (!is_vht_siso(&tbl->rate)) | 
|  | return false; | 
|  |  | 
|  | if ((tbl->rate.bw == RATE_MCS_CHAN_WIDTH_80) && | 
|  | (tbl->rate.index == IWL_RATE_MCS_0_INDEX) && | 
|  | (scale_action == RS_ACTION_DOWNSCALE)) { | 
|  | tbl->rate.bw = RATE_MCS_CHAN_WIDTH_20; | 
|  | tbl->rate.index = IWL_RATE_MCS_4_INDEX; | 
|  | IWL_DEBUG_RATE(mvm, "Switch 80Mhz SISO MCS0 -> 20Mhz MCS4\n"); | 
|  | goto tweaked; | 
|  | } | 
|  |  | 
|  | /* Go back to 80Mhz MCS1 only if we've established that 20Mhz MCS5 is | 
|  | * sustainable, i.e. we're past the test window. We can't go back | 
|  | * if MCS5 is just tested as this will happen always after switching | 
|  | * to 20Mhz MCS4 because the rate stats are cleared. | 
|  | */ | 
|  | if ((tbl->rate.bw == RATE_MCS_CHAN_WIDTH_20) && | 
|  | (((tbl->rate.index == IWL_RATE_MCS_5_INDEX) && | 
|  | (scale_action == RS_ACTION_STAY)) || | 
|  | ((tbl->rate.index > IWL_RATE_MCS_5_INDEX) && | 
|  | (scale_action == RS_ACTION_UPSCALE)))) { | 
|  | tbl->rate.bw = RATE_MCS_CHAN_WIDTH_80; | 
|  | tbl->rate.index = IWL_RATE_MCS_1_INDEX; | 
|  | IWL_DEBUG_RATE(mvm, "Switch 20Mhz SISO MCS5 -> 80Mhz MCS1\n"); | 
|  | goto tweaked; | 
|  | } | 
|  |  | 
|  | return false; | 
|  |  | 
|  | tweaked: | 
|  | rs_set_expected_tpt_table(lq_sta, tbl); | 
|  | rs_rate_scale_clear_tbl_windows(mvm, tbl); | 
|  | return true; | 
|  | } | 
|  |  | 
|  | static enum rs_column rs_get_next_column(struct iwl_mvm *mvm, | 
|  | struct iwl_lq_sta *lq_sta, | 
|  | struct ieee80211_sta *sta, | 
|  | struct iwl_scale_tbl_info *tbl) | 
|  | { | 
|  | int i, j, max_rate; | 
|  | enum rs_column next_col_id; | 
|  | const struct rs_tx_column *curr_col = &rs_tx_columns[tbl->column]; | 
|  | const struct rs_tx_column *next_col; | 
|  | allow_column_func_t allow_func; | 
|  | u8 valid_ants = iwl_mvm_get_valid_tx_ant(mvm); | 
|  | const u16 *expected_tpt_tbl; | 
|  | u16 tpt, max_expected_tpt; | 
|  |  | 
|  | for (i = 0; i < MAX_NEXT_COLUMNS; i++) { | 
|  | next_col_id = curr_col->next_columns[i]; | 
|  |  | 
|  | if (next_col_id == RS_COLUMN_INVALID) | 
|  | continue; | 
|  |  | 
|  | if (lq_sta->visited_columns & BIT(next_col_id)) { | 
|  | IWL_DEBUG_RATE(mvm, "Skip already visited column %d\n", | 
|  | next_col_id); | 
|  | continue; | 
|  | } | 
|  |  | 
|  | next_col = &rs_tx_columns[next_col_id]; | 
|  |  | 
|  | if (!rs_is_valid_ant(valid_ants, next_col->ant)) { | 
|  | IWL_DEBUG_RATE(mvm, | 
|  | "Skip column %d as ANT config isn't supported by chip. valid_ants 0x%x column ant 0x%x\n", | 
|  | next_col_id, valid_ants, next_col->ant); | 
|  | continue; | 
|  | } | 
|  |  | 
|  | for (j = 0; j < MAX_COLUMN_CHECKS; j++) { | 
|  | allow_func = next_col->checks[j]; | 
|  | if (allow_func && !allow_func(mvm, sta, &tbl->rate, | 
|  | next_col)) | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (j != MAX_COLUMN_CHECKS) { | 
|  | IWL_DEBUG_RATE(mvm, | 
|  | "Skip column %d: not allowed (check %d failed)\n", | 
|  | next_col_id, j); | 
|  |  | 
|  | continue; | 
|  | } | 
|  |  | 
|  | tpt = lq_sta->last_tpt / 100; | 
|  | expected_tpt_tbl = rs_get_expected_tpt_table(lq_sta, next_col, | 
|  | rs_bw_from_sta_bw(sta)); | 
|  | if (WARN_ON_ONCE(!expected_tpt_tbl)) | 
|  | continue; | 
|  |  | 
|  | max_rate = rs_get_max_allowed_rate(lq_sta, next_col); | 
|  | if (max_rate == IWL_RATE_INVALID) { | 
|  | IWL_DEBUG_RATE(mvm, | 
|  | "Skip column %d: no rate is allowed in this column\n", | 
|  | next_col_id); | 
|  | continue; | 
|  | } | 
|  |  | 
|  | max_expected_tpt = expected_tpt_tbl[max_rate]; | 
|  | if (tpt >= max_expected_tpt) { | 
|  | IWL_DEBUG_RATE(mvm, | 
|  | "Skip column %d: can't beat current TPT. Max expected %d current %d\n", | 
|  | next_col_id, max_expected_tpt, tpt); | 
|  | continue; | 
|  | } | 
|  |  | 
|  | IWL_DEBUG_RATE(mvm, | 
|  | "Found potential column %d. Max expected %d current %d\n", | 
|  | next_col_id, max_expected_tpt, tpt); | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (i == MAX_NEXT_COLUMNS) | 
|  | return RS_COLUMN_INVALID; | 
|  |  | 
|  | return next_col_id; | 
|  | } | 
|  |  | 
|  | static int rs_switch_to_column(struct iwl_mvm *mvm, | 
|  | struct iwl_lq_sta *lq_sta, | 
|  | struct ieee80211_sta *sta, | 
|  | enum rs_column col_id) | 
|  | { | 
|  | struct iwl_scale_tbl_info *tbl = &(lq_sta->lq_info[lq_sta->active_tbl]); | 
|  | struct iwl_scale_tbl_info *search_tbl = | 
|  | &(lq_sta->lq_info[(1 - lq_sta->active_tbl)]); | 
|  | struct rs_rate *rate = &search_tbl->rate; | 
|  | const struct rs_tx_column *column = &rs_tx_columns[col_id]; | 
|  | const struct rs_tx_column *curr_column = &rs_tx_columns[tbl->column]; | 
|  | u32 sz = (sizeof(struct iwl_scale_tbl_info) - | 
|  | (sizeof(struct iwl_rate_scale_data) * IWL_RATE_COUNT)); | 
|  | unsigned long rate_mask = 0; | 
|  | u32 rate_idx = 0; | 
|  |  | 
|  | memcpy(search_tbl, tbl, sz); | 
|  |  | 
|  | rate->sgi = column->sgi; | 
|  | rate->ant = column->ant; | 
|  |  | 
|  | if (column->mode == RS_LEGACY) { | 
|  | if (lq_sta->band == NL80211_BAND_5GHZ) | 
|  | rate->type = LQ_LEGACY_A; | 
|  | else | 
|  | rate->type = LQ_LEGACY_G; | 
|  |  | 
|  | rate->bw = RATE_MCS_CHAN_WIDTH_20; | 
|  | rate->ldpc = false; | 
|  | rate_mask = lq_sta->active_legacy_rate; | 
|  | } else if (column->mode == RS_SISO) { | 
|  | rate->type = lq_sta->is_vht ? LQ_VHT_SISO : LQ_HT_SISO; | 
|  | rate_mask = lq_sta->active_siso_rate; | 
|  | } else if (column->mode == RS_MIMO2) { | 
|  | rate->type = lq_sta->is_vht ? LQ_VHT_MIMO2 : LQ_HT_MIMO2; | 
|  | rate_mask = lq_sta->active_mimo2_rate; | 
|  | } else { | 
|  | WARN_ONCE(1, "Bad column mode"); | 
|  | } | 
|  |  | 
|  | if (column->mode != RS_LEGACY) { | 
|  | rate->bw = rs_bw_from_sta_bw(sta); | 
|  | rate->ldpc = lq_sta->ldpc; | 
|  | } | 
|  |  | 
|  | search_tbl->column = col_id; | 
|  | rs_set_expected_tpt_table(lq_sta, search_tbl); | 
|  |  | 
|  | lq_sta->visited_columns |= BIT(col_id); | 
|  |  | 
|  | /* Get the best matching rate if we're changing modes. e.g. | 
|  | * SISO->MIMO, LEGACY->SISO, MIMO->SISO | 
|  | */ | 
|  | if (curr_column->mode != column->mode) { | 
|  | rate_idx = rs_get_best_rate(mvm, lq_sta, search_tbl, | 
|  | rate_mask, rate->index); | 
|  |  | 
|  | if ((rate_idx == IWL_RATE_INVALID) || | 
|  | !(BIT(rate_idx) & rate_mask)) { | 
|  | IWL_DEBUG_RATE(mvm, | 
|  | "can not switch with index %d" | 
|  | " rate mask %lx\n", | 
|  | rate_idx, rate_mask); | 
|  |  | 
|  | goto err; | 
|  | } | 
|  |  | 
|  | rate->index = rate_idx; | 
|  | } | 
|  |  | 
|  | IWL_DEBUG_RATE(mvm, "Switched to column %d: Index %d\n", | 
|  | col_id, rate->index); | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | err: | 
|  | rate->type = LQ_NONE; | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | static enum rs_action rs_get_rate_action(struct iwl_mvm *mvm, | 
|  | struct iwl_scale_tbl_info *tbl, | 
|  | s32 sr, int low, int high, | 
|  | int current_tpt, | 
|  | int low_tpt, int high_tpt) | 
|  | { | 
|  | enum rs_action action = RS_ACTION_STAY; | 
|  |  | 
|  | if ((sr <= RS_PERCENT(IWL_MVM_RS_SR_FORCE_DECREASE)) || | 
|  | (current_tpt == 0)) { | 
|  | IWL_DEBUG_RATE(mvm, | 
|  | "Decrease rate because of low SR\n"); | 
|  | return RS_ACTION_DOWNSCALE; | 
|  | } | 
|  |  | 
|  | if ((low_tpt == IWL_INVALID_VALUE) && | 
|  | (high_tpt == IWL_INVALID_VALUE) && | 
|  | (high != IWL_RATE_INVALID)) { | 
|  | IWL_DEBUG_RATE(mvm, | 
|  | "No data about high/low rates. Increase rate\n"); | 
|  | return RS_ACTION_UPSCALE; | 
|  | } | 
|  |  | 
|  | if ((high_tpt == IWL_INVALID_VALUE) && | 
|  | (high != IWL_RATE_INVALID) && | 
|  | (low_tpt != IWL_INVALID_VALUE) && | 
|  | (low_tpt < current_tpt)) { | 
|  | IWL_DEBUG_RATE(mvm, | 
|  | "No data about high rate and low rate is worse. Increase rate\n"); | 
|  | return RS_ACTION_UPSCALE; | 
|  | } | 
|  |  | 
|  | if ((high_tpt != IWL_INVALID_VALUE) && | 
|  | (high_tpt > current_tpt)) { | 
|  | IWL_DEBUG_RATE(mvm, | 
|  | "Higher rate is better. Increate rate\n"); | 
|  | return RS_ACTION_UPSCALE; | 
|  | } | 
|  |  | 
|  | if ((low_tpt != IWL_INVALID_VALUE) && | 
|  | (high_tpt != IWL_INVALID_VALUE) && | 
|  | (low_tpt < current_tpt) && | 
|  | (high_tpt < current_tpt)) { | 
|  | IWL_DEBUG_RATE(mvm, | 
|  | "Both high and low are worse. Maintain rate\n"); | 
|  | return RS_ACTION_STAY; | 
|  | } | 
|  |  | 
|  | if ((low_tpt != IWL_INVALID_VALUE) && | 
|  | (low_tpt > current_tpt)) { | 
|  | IWL_DEBUG_RATE(mvm, | 
|  | "Lower rate is better\n"); | 
|  | action = RS_ACTION_DOWNSCALE; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | if ((low_tpt == IWL_INVALID_VALUE) && | 
|  | (low != IWL_RATE_INVALID)) { | 
|  | IWL_DEBUG_RATE(mvm, | 
|  | "No data about lower rate\n"); | 
|  | action = RS_ACTION_DOWNSCALE; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | IWL_DEBUG_RATE(mvm, "Maintain rate\n"); | 
|  |  | 
|  | out: | 
|  | if ((action == RS_ACTION_DOWNSCALE) && (low != IWL_RATE_INVALID)) { | 
|  | if (sr >= RS_PERCENT(IWL_MVM_RS_SR_NO_DECREASE)) { | 
|  | IWL_DEBUG_RATE(mvm, | 
|  | "SR is above NO DECREASE. Avoid downscale\n"); | 
|  | action = RS_ACTION_STAY; | 
|  | } else if (current_tpt > (100 * tbl->expected_tpt[low])) { | 
|  | IWL_DEBUG_RATE(mvm, | 
|  | "Current TPT is higher than max expected in low rate. Avoid downscale\n"); | 
|  | action = RS_ACTION_STAY; | 
|  | } else { | 
|  | IWL_DEBUG_RATE(mvm, "Decrease rate\n"); | 
|  | } | 
|  | } | 
|  |  | 
|  | return action; | 
|  | } | 
|  |  | 
|  | static bool rs_stbc_allow(struct iwl_mvm *mvm, struct ieee80211_sta *sta, | 
|  | struct iwl_lq_sta *lq_sta) | 
|  | { | 
|  | /* Our chip supports Tx STBC and the peer is an HT/VHT STA which | 
|  | * supports STBC of at least 1*SS | 
|  | */ | 
|  | if (!lq_sta->stbc_capable) | 
|  | return false; | 
|  |  | 
|  | if (!iwl_mvm_bt_coex_is_mimo_allowed(mvm, sta)) | 
|  | return false; | 
|  |  | 
|  | return true; | 
|  | } | 
|  |  | 
|  | static void rs_get_adjacent_txp(struct iwl_mvm *mvm, int index, | 
|  | int *weaker, int *stronger) | 
|  | { | 
|  | *weaker = index + IWL_MVM_RS_TPC_TX_POWER_STEP; | 
|  | if (*weaker > TPC_MAX_REDUCTION) | 
|  | *weaker = TPC_INVALID; | 
|  |  | 
|  | *stronger = index - IWL_MVM_RS_TPC_TX_POWER_STEP; | 
|  | if (*stronger < 0) | 
|  | *stronger = TPC_INVALID; | 
|  | } | 
|  |  | 
|  | static bool rs_tpc_allowed(struct iwl_mvm *mvm, struct ieee80211_vif *vif, | 
|  | struct rs_rate *rate, enum nl80211_band band) | 
|  | { | 
|  | int index = rate->index; | 
|  | bool cam = (iwlmvm_mod_params.power_scheme == IWL_POWER_SCHEME_CAM); | 
|  | bool sta_ps_disabled = (vif->type == NL80211_IFTYPE_STATION && | 
|  | !vif->bss_conf.ps); | 
|  |  | 
|  | IWL_DEBUG_RATE(mvm, "cam: %d sta_ps_disabled %d\n", | 
|  | cam, sta_ps_disabled); | 
|  | /* | 
|  | * allow tpc only if power management is enabled, or bt coex | 
|  | * activity grade allows it and we are on 2.4Ghz. | 
|  | */ | 
|  | if ((cam || sta_ps_disabled) && | 
|  | !iwl_mvm_bt_coex_is_tpc_allowed(mvm, band)) | 
|  | return false; | 
|  |  | 
|  | IWL_DEBUG_RATE(mvm, "check rate, table type: %d\n", rate->type); | 
|  | if (is_legacy(rate)) | 
|  | return index == IWL_RATE_54M_INDEX; | 
|  | if (is_ht(rate)) | 
|  | return index == IWL_RATE_MCS_7_INDEX; | 
|  | if (is_vht(rate)) | 
|  | return index == IWL_RATE_MCS_7_INDEX || | 
|  | index == IWL_RATE_MCS_8_INDEX || | 
|  | index == IWL_RATE_MCS_9_INDEX; | 
|  |  | 
|  | WARN_ON_ONCE(1); | 
|  | return false; | 
|  | } | 
|  |  | 
|  | enum tpc_action { | 
|  | TPC_ACTION_STAY, | 
|  | TPC_ACTION_DECREASE, | 
|  | TPC_ACTION_INCREASE, | 
|  | TPC_ACTION_NO_RESTIRCTION, | 
|  | }; | 
|  |  | 
|  | static enum tpc_action rs_get_tpc_action(struct iwl_mvm *mvm, | 
|  | s32 sr, int weak, int strong, | 
|  | int current_tpt, | 
|  | int weak_tpt, int strong_tpt) | 
|  | { | 
|  | /* stay until we have valid tpt */ | 
|  | if (current_tpt == IWL_INVALID_VALUE) { | 
|  | IWL_DEBUG_RATE(mvm, "no current tpt. stay.\n"); | 
|  | return TPC_ACTION_STAY; | 
|  | } | 
|  |  | 
|  | /* Too many failures, increase txp */ | 
|  | if (sr <= RS_PERCENT(IWL_MVM_RS_TPC_SR_FORCE_INCREASE) || | 
|  | current_tpt == 0) { | 
|  | IWL_DEBUG_RATE(mvm, "increase txp because of weak SR\n"); | 
|  | return TPC_ACTION_NO_RESTIRCTION; | 
|  | } | 
|  |  | 
|  | /* try decreasing first if applicable */ | 
|  | if (sr >= RS_PERCENT(IWL_MVM_RS_TPC_SR_NO_INCREASE) && | 
|  | weak != TPC_INVALID) { | 
|  | if (weak_tpt == IWL_INVALID_VALUE && | 
|  | (strong_tpt == IWL_INVALID_VALUE || | 
|  | current_tpt >= strong_tpt)) { | 
|  | IWL_DEBUG_RATE(mvm, | 
|  | "no weak txp measurement. decrease txp\n"); | 
|  | return TPC_ACTION_DECREASE; | 
|  | } | 
|  |  | 
|  | if (weak_tpt > current_tpt) { | 
|  | IWL_DEBUG_RATE(mvm, | 
|  | "lower txp has better tpt. decrease txp\n"); | 
|  | return TPC_ACTION_DECREASE; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* next, increase if needed */ | 
|  | if (sr < RS_PERCENT(IWL_MVM_RS_TPC_SR_NO_INCREASE) && | 
|  | strong != TPC_INVALID) { | 
|  | if (weak_tpt == IWL_INVALID_VALUE && | 
|  | strong_tpt != IWL_INVALID_VALUE && | 
|  | current_tpt < strong_tpt) { | 
|  | IWL_DEBUG_RATE(mvm, | 
|  | "higher txp has better tpt. increase txp\n"); | 
|  | return TPC_ACTION_INCREASE; | 
|  | } | 
|  |  | 
|  | if (weak_tpt < current_tpt && | 
|  | (strong_tpt == IWL_INVALID_VALUE || | 
|  | strong_tpt > current_tpt)) { | 
|  | IWL_DEBUG_RATE(mvm, | 
|  | "lower txp has worse tpt. increase txp\n"); | 
|  | return TPC_ACTION_INCREASE; | 
|  | } | 
|  | } | 
|  |  | 
|  | IWL_DEBUG_RATE(mvm, "no need to increase or decrease txp - stay\n"); | 
|  | return TPC_ACTION_STAY; | 
|  | } | 
|  |  | 
|  | static bool rs_tpc_perform(struct iwl_mvm *mvm, | 
|  | struct ieee80211_sta *sta, | 
|  | struct iwl_lq_sta *lq_sta, | 
|  | struct iwl_scale_tbl_info *tbl) | 
|  | { | 
|  | struct iwl_mvm_sta *mvm_sta = iwl_mvm_sta_from_mac80211(sta); | 
|  | struct ieee80211_vif *vif = mvm_sta->vif; | 
|  | struct ieee80211_chanctx_conf *chanctx_conf; | 
|  | enum nl80211_band band; | 
|  | struct iwl_rate_scale_data *window; | 
|  | struct rs_rate *rate = &tbl->rate; | 
|  | enum tpc_action action; | 
|  | s32 sr; | 
|  | u8 cur = lq_sta->lq.reduced_tpc; | 
|  | int current_tpt; | 
|  | int weak, strong; | 
|  | int weak_tpt = IWL_INVALID_VALUE, strong_tpt = IWL_INVALID_VALUE; | 
|  |  | 
|  | #ifdef CONFIG_MAC80211_DEBUGFS | 
|  | if (lq_sta->pers.dbg_fixed_txp_reduction <= TPC_MAX_REDUCTION) { | 
|  | IWL_DEBUG_RATE(mvm, "fixed tpc: %d\n", | 
|  | lq_sta->pers.dbg_fixed_txp_reduction); | 
|  | lq_sta->lq.reduced_tpc = lq_sta->pers.dbg_fixed_txp_reduction; | 
|  | return cur != lq_sta->pers.dbg_fixed_txp_reduction; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | rcu_read_lock(); | 
|  | chanctx_conf = rcu_dereference(vif->chanctx_conf); | 
|  | if (WARN_ON(!chanctx_conf)) | 
|  | band = NUM_NL80211_BANDS; | 
|  | else | 
|  | band = chanctx_conf->def.chan->band; | 
|  | rcu_read_unlock(); | 
|  |  | 
|  | if (!rs_tpc_allowed(mvm, vif, rate, band)) { | 
|  | IWL_DEBUG_RATE(mvm, | 
|  | "tpc is not allowed. remove txp restrictions\n"); | 
|  | lq_sta->lq.reduced_tpc = TPC_NO_REDUCTION; | 
|  | return cur != TPC_NO_REDUCTION; | 
|  | } | 
|  |  | 
|  | rs_get_adjacent_txp(mvm, cur, &weak, &strong); | 
|  |  | 
|  | /* Collect measured throughputs for current and adjacent rates */ | 
|  | window = tbl->tpc_win; | 
|  | sr = window[cur].success_ratio; | 
|  | current_tpt = window[cur].average_tpt; | 
|  | if (weak != TPC_INVALID) | 
|  | weak_tpt = window[weak].average_tpt; | 
|  | if (strong != TPC_INVALID) | 
|  | strong_tpt = window[strong].average_tpt; | 
|  |  | 
|  | IWL_DEBUG_RATE(mvm, | 
|  | "(TPC: %d): cur_tpt %d SR %d weak %d strong %d weak_tpt %d strong_tpt %d\n", | 
|  | cur, current_tpt, sr, weak, strong, | 
|  | weak_tpt, strong_tpt); | 
|  |  | 
|  | action = rs_get_tpc_action(mvm, sr, weak, strong, | 
|  | current_tpt, weak_tpt, strong_tpt); | 
|  |  | 
|  | /* override actions if we are on the edge */ | 
|  | if (weak == TPC_INVALID && action == TPC_ACTION_DECREASE) { | 
|  | IWL_DEBUG_RATE(mvm, "already in lowest txp, stay\n"); | 
|  | action = TPC_ACTION_STAY; | 
|  | } else if (strong == TPC_INVALID && | 
|  | (action == TPC_ACTION_INCREASE || | 
|  | action == TPC_ACTION_NO_RESTIRCTION)) { | 
|  | IWL_DEBUG_RATE(mvm, "already in highest txp, stay\n"); | 
|  | action = TPC_ACTION_STAY; | 
|  | } | 
|  |  | 
|  | switch (action) { | 
|  | case TPC_ACTION_DECREASE: | 
|  | lq_sta->lq.reduced_tpc = weak; | 
|  | return true; | 
|  | case TPC_ACTION_INCREASE: | 
|  | lq_sta->lq.reduced_tpc = strong; | 
|  | return true; | 
|  | case TPC_ACTION_NO_RESTIRCTION: | 
|  | lq_sta->lq.reduced_tpc = TPC_NO_REDUCTION; | 
|  | return true; | 
|  | case TPC_ACTION_STAY: | 
|  | /* do nothing */ | 
|  | break; | 
|  | } | 
|  | return false; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Do rate scaling and search for new modulation mode. | 
|  | */ | 
|  | static void rs_rate_scale_perform(struct iwl_mvm *mvm, | 
|  | struct ieee80211_sta *sta, | 
|  | struct iwl_lq_sta *lq_sta, | 
|  | int tid, bool ndp) | 
|  | { | 
|  | int low = IWL_RATE_INVALID; | 
|  | int high = IWL_RATE_INVALID; | 
|  | int index; | 
|  | struct iwl_rate_scale_data *window = NULL; | 
|  | int current_tpt = IWL_INVALID_VALUE; | 
|  | int low_tpt = IWL_INVALID_VALUE; | 
|  | int high_tpt = IWL_INVALID_VALUE; | 
|  | u32 fail_count; | 
|  | enum rs_action scale_action = RS_ACTION_STAY; | 
|  | u16 rate_mask; | 
|  | u8 update_lq = 0; | 
|  | struct iwl_scale_tbl_info *tbl, *tbl1; | 
|  | u8 active_tbl = 0; | 
|  | u8 done_search = 0; | 
|  | u16 high_low; | 
|  | s32 sr; | 
|  | u8 prev_agg = lq_sta->is_agg; | 
|  | struct iwl_mvm_sta *sta_priv = iwl_mvm_sta_from_mac80211(sta); | 
|  | struct iwl_mvm_tid_data *tid_data; | 
|  | struct rs_rate *rate; | 
|  |  | 
|  | lq_sta->is_agg = !!sta_priv->agg_tids; | 
|  |  | 
|  | /* | 
|  | * Select rate-scale / modulation-mode table to work with in | 
|  | * the rest of this function:  "search" if searching for better | 
|  | * modulation mode, or "active" if doing rate scaling within a mode. | 
|  | */ | 
|  | if (!lq_sta->search_better_tbl) | 
|  | active_tbl = lq_sta->active_tbl; | 
|  | else | 
|  | active_tbl = 1 - lq_sta->active_tbl; | 
|  |  | 
|  | tbl = &(lq_sta->lq_info[active_tbl]); | 
|  | rate = &tbl->rate; | 
|  |  | 
|  | if (prev_agg != lq_sta->is_agg) { | 
|  | IWL_DEBUG_RATE(mvm, | 
|  | "Aggregation changed: prev %d current %d. Update expected TPT table\n", | 
|  | prev_agg, lq_sta->is_agg); | 
|  | rs_set_expected_tpt_table(lq_sta, tbl); | 
|  | rs_rate_scale_clear_tbl_windows(mvm, tbl); | 
|  | } | 
|  |  | 
|  | /* current tx rate */ | 
|  | index = rate->index; | 
|  |  | 
|  | /* rates available for this association, and for modulation mode */ | 
|  | rate_mask = rs_get_supported_rates(lq_sta, rate); | 
|  |  | 
|  | if (!(BIT(index) & rate_mask)) { | 
|  | IWL_ERR(mvm, "Current Rate is not valid\n"); | 
|  | if (lq_sta->search_better_tbl) { | 
|  | /* revert to active table if search table is not valid*/ | 
|  | rate->type = LQ_NONE; | 
|  | lq_sta->search_better_tbl = 0; | 
|  | tbl = &(lq_sta->lq_info[lq_sta->active_tbl]); | 
|  | rs_update_rate_tbl(mvm, sta, lq_sta, tbl); | 
|  | } | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* Get expected throughput table and history window for current rate */ | 
|  | if (!tbl->expected_tpt) { | 
|  | IWL_ERR(mvm, "tbl->expected_tpt is NULL\n"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* TODO: handle rate_idx_mask and rate_idx_mcs_mask */ | 
|  | window = &(tbl->win[index]); | 
|  |  | 
|  | /* | 
|  | * If there is not enough history to calculate actual average | 
|  | * throughput, keep analyzing results of more tx frames, without | 
|  | * changing rate or mode (bypass most of the rest of this function). | 
|  | * Set up new rate table in uCode only if old rate is not supported | 
|  | * in current association (use new rate found above). | 
|  | */ | 
|  | fail_count = window->counter - window->success_counter; | 
|  | if ((fail_count < IWL_MVM_RS_RATE_MIN_FAILURE_TH) && | 
|  | (window->success_counter < IWL_MVM_RS_RATE_MIN_SUCCESS_TH)) { | 
|  | IWL_DEBUG_RATE(mvm, | 
|  | "%s: Test Window: succ %d total %d\n", | 
|  | rs_pretty_rate(rate), | 
|  | window->success_counter, window->counter); | 
|  |  | 
|  | /* Can't calculate this yet; not enough history */ | 
|  | window->average_tpt = IWL_INVALID_VALUE; | 
|  |  | 
|  | /* Should we stay with this modulation mode, | 
|  | * or search for a new one? */ | 
|  | rs_stay_in_table(lq_sta, false); | 
|  |  | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* If we are searching for better modulation mode, check success. */ | 
|  | if (lq_sta->search_better_tbl) { | 
|  | /* If good success, continue using the "search" mode; | 
|  | * no need to send new link quality command, since we're | 
|  | * continuing to use the setup that we've been trying. */ | 
|  | if (window->average_tpt > lq_sta->last_tpt) { | 
|  | IWL_DEBUG_RATE(mvm, | 
|  | "SWITCHING TO NEW TABLE SR: %d " | 
|  | "cur-tpt %d old-tpt %d\n", | 
|  | window->success_ratio, | 
|  | window->average_tpt, | 
|  | lq_sta->last_tpt); | 
|  |  | 
|  | /* Swap tables; "search" becomes "active" */ | 
|  | lq_sta->active_tbl = active_tbl; | 
|  | current_tpt = window->average_tpt; | 
|  | /* Else poor success; go back to mode in "active" table */ | 
|  | } else { | 
|  | IWL_DEBUG_RATE(mvm, | 
|  | "GOING BACK TO THE OLD TABLE: SR %d " | 
|  | "cur-tpt %d old-tpt %d\n", | 
|  | window->success_ratio, | 
|  | window->average_tpt, | 
|  | lq_sta->last_tpt); | 
|  |  | 
|  | /* Nullify "search" table */ | 
|  | rate->type = LQ_NONE; | 
|  |  | 
|  | /* Revert to "active" table */ | 
|  | active_tbl = lq_sta->active_tbl; | 
|  | tbl = &(lq_sta->lq_info[active_tbl]); | 
|  |  | 
|  | /* Revert to "active" rate and throughput info */ | 
|  | index = tbl->rate.index; | 
|  | current_tpt = lq_sta->last_tpt; | 
|  |  | 
|  | /* Need to set up a new rate table in uCode */ | 
|  | update_lq = 1; | 
|  | } | 
|  |  | 
|  | /* Either way, we've made a decision; modulation mode | 
|  | * search is done, allow rate adjustment next time. */ | 
|  | lq_sta->search_better_tbl = 0; | 
|  | done_search = 1;	/* Don't switch modes below! */ | 
|  | goto lq_update; | 
|  | } | 
|  |  | 
|  | /* (Else) not in search of better modulation mode, try for better | 
|  | * starting rate, while staying in this mode. */ | 
|  | high_low = rs_get_adjacent_rate(mvm, index, rate_mask, rate->type); | 
|  | low = high_low & 0xff; | 
|  | high = (high_low >> 8) & 0xff; | 
|  |  | 
|  | /* TODO: handle rate_idx_mask and rate_idx_mcs_mask */ | 
|  |  | 
|  | sr = window->success_ratio; | 
|  |  | 
|  | /* Collect measured throughputs for current and adjacent rates */ | 
|  | current_tpt = window->average_tpt; | 
|  | if (low != IWL_RATE_INVALID) | 
|  | low_tpt = tbl->win[low].average_tpt; | 
|  | if (high != IWL_RATE_INVALID) | 
|  | high_tpt = tbl->win[high].average_tpt; | 
|  |  | 
|  | IWL_DEBUG_RATE(mvm, | 
|  | "%s: cur_tpt %d SR %d low %d high %d low_tpt %d high_tpt %d\n", | 
|  | rs_pretty_rate(rate), current_tpt, sr, | 
|  | low, high, low_tpt, high_tpt); | 
|  |  | 
|  | scale_action = rs_get_rate_action(mvm, tbl, sr, low, high, | 
|  | current_tpt, low_tpt, high_tpt); | 
|  |  | 
|  | /* Force a search in case BT doesn't like us being in MIMO */ | 
|  | if (is_mimo(rate) && | 
|  | !iwl_mvm_bt_coex_is_mimo_allowed(mvm, sta)) { | 
|  | IWL_DEBUG_RATE(mvm, | 
|  | "BT Coex forbids MIMO. Search for new config\n"); | 
|  | rs_stay_in_table(lq_sta, true); | 
|  | goto lq_update; | 
|  | } | 
|  |  | 
|  | switch (scale_action) { | 
|  | case RS_ACTION_DOWNSCALE: | 
|  | /* Decrease starting rate, update uCode's rate table */ | 
|  | if (low != IWL_RATE_INVALID) { | 
|  | update_lq = 1; | 
|  | index = low; | 
|  | } else { | 
|  | IWL_DEBUG_RATE(mvm, | 
|  | "At the bottom rate. Can't decrease\n"); | 
|  | } | 
|  |  | 
|  | break; | 
|  | case RS_ACTION_UPSCALE: | 
|  | /* Increase starting rate, update uCode's rate table */ | 
|  | if (high != IWL_RATE_INVALID) { | 
|  | update_lq = 1; | 
|  | index = high; | 
|  | } else { | 
|  | IWL_DEBUG_RATE(mvm, | 
|  | "At the top rate. Can't increase\n"); | 
|  | } | 
|  |  | 
|  | break; | 
|  | case RS_ACTION_STAY: | 
|  | /* No change */ | 
|  | if (lq_sta->rs_state == RS_STATE_STAY_IN_COLUMN) | 
|  | update_lq = rs_tpc_perform(mvm, sta, lq_sta, tbl); | 
|  | break; | 
|  | default: | 
|  | break; | 
|  | } | 
|  |  | 
|  | lq_update: | 
|  | /* Replace uCode's rate table for the destination station. */ | 
|  | if (update_lq) { | 
|  | tbl->rate.index = index; | 
|  | if (IWL_MVM_RS_80_20_FAR_RANGE_TWEAK) | 
|  | rs_tweak_rate_tbl(mvm, sta, lq_sta, tbl, scale_action); | 
|  | rs_set_amsdu_len(mvm, sta, tbl, scale_action); | 
|  | rs_update_rate_tbl(mvm, sta, lq_sta, tbl); | 
|  | } | 
|  |  | 
|  | rs_stay_in_table(lq_sta, false); | 
|  |  | 
|  | /* | 
|  | * Search for new modulation mode if we're: | 
|  | * 1)  Not changing rates right now | 
|  | * 2)  Not just finishing up a search | 
|  | * 3)  Allowing a new search | 
|  | */ | 
|  | if (!update_lq && !done_search && | 
|  | lq_sta->rs_state == RS_STATE_SEARCH_CYCLE_STARTED | 
|  | && window->counter) { | 
|  | enum rs_column next_column; | 
|  |  | 
|  | /* Save current throughput to compare with "search" throughput*/ | 
|  | lq_sta->last_tpt = current_tpt; | 
|  |  | 
|  | IWL_DEBUG_RATE(mvm, | 
|  | "Start Search: update_lq %d done_search %d rs_state %d win->counter %d\n", | 
|  | update_lq, done_search, lq_sta->rs_state, | 
|  | window->counter); | 
|  |  | 
|  | next_column = rs_get_next_column(mvm, lq_sta, sta, tbl); | 
|  | if (next_column != RS_COLUMN_INVALID) { | 
|  | int ret = rs_switch_to_column(mvm, lq_sta, sta, | 
|  | next_column); | 
|  | if (!ret) | 
|  | lq_sta->search_better_tbl = 1; | 
|  | } else { | 
|  | IWL_DEBUG_RATE(mvm, | 
|  | "No more columns to explore in search cycle. Go to RS_STATE_SEARCH_CYCLE_ENDED\n"); | 
|  | lq_sta->rs_state = RS_STATE_SEARCH_CYCLE_ENDED; | 
|  | } | 
|  |  | 
|  | /* If new "search" mode was selected, set up in uCode table */ | 
|  | if (lq_sta->search_better_tbl) { | 
|  | /* Access the "search" table, clear its history. */ | 
|  | tbl = &(lq_sta->lq_info[(1 - lq_sta->active_tbl)]); | 
|  | rs_rate_scale_clear_tbl_windows(mvm, tbl); | 
|  |  | 
|  | /* Use new "search" start rate */ | 
|  | index = tbl->rate.index; | 
|  |  | 
|  | rs_dump_rate(mvm, &tbl->rate, | 
|  | "Switch to SEARCH TABLE:"); | 
|  | rs_update_rate_tbl(mvm, sta, lq_sta, tbl); | 
|  | } else { | 
|  | done_search = 1; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (done_search && lq_sta->rs_state == RS_STATE_SEARCH_CYCLE_ENDED) { | 
|  | /* If the "active" (non-search) mode was legacy, | 
|  | * and we've tried switching antennas, | 
|  | * but we haven't been able to try HT modes (not available), | 
|  | * stay with best antenna legacy modulation for a while | 
|  | * before next round of mode comparisons. */ | 
|  | tbl1 = &(lq_sta->lq_info[lq_sta->active_tbl]); | 
|  | if (is_legacy(&tbl1->rate)) { | 
|  | IWL_DEBUG_RATE(mvm, "LQ: STAY in legacy table\n"); | 
|  |  | 
|  | if (tid != IWL_MAX_TID_COUNT) { | 
|  | tid_data = &sta_priv->tid_data[tid]; | 
|  | if (tid_data->state != IWL_AGG_OFF) { | 
|  | IWL_DEBUG_RATE(mvm, | 
|  | "Stop aggregation on tid %d\n", | 
|  | tid); | 
|  | ieee80211_stop_tx_ba_session(sta, tid); | 
|  | } | 
|  | } | 
|  | rs_set_stay_in_table(mvm, 1, lq_sta); | 
|  | } else { | 
|  | /* If we're in an HT mode, and all 3 mode switch actions | 
|  | * have been tried and compared, stay in this best modulation | 
|  | * mode for a while before next round of mode comparisons. */ | 
|  | if ((lq_sta->last_tpt > IWL_AGG_TPT_THREHOLD) && | 
|  | (lq_sta->tx_agg_tid_en & (1 << tid)) && | 
|  | (tid != IWL_MAX_TID_COUNT)) { | 
|  | tid_data = &sta_priv->tid_data[tid]; | 
|  | if (tid_data->state == IWL_AGG_OFF && !ndp) { | 
|  | IWL_DEBUG_RATE(mvm, | 
|  | "try to aggregate tid %d\n", | 
|  | tid); | 
|  | rs_tl_turn_on_agg(mvm, tid, | 
|  | lq_sta, sta); | 
|  | } | 
|  | } | 
|  | rs_set_stay_in_table(mvm, 0, lq_sta); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | struct rs_init_rate_info { | 
|  | s8 rssi; | 
|  | u8 rate_idx; | 
|  | }; | 
|  |  | 
|  | static const struct rs_init_rate_info rs_optimal_rates_24ghz_legacy[] = { | 
|  | { -60, IWL_RATE_54M_INDEX }, | 
|  | { -64, IWL_RATE_48M_INDEX }, | 
|  | { -68, IWL_RATE_36M_INDEX }, | 
|  | { -80, IWL_RATE_24M_INDEX }, | 
|  | { -84, IWL_RATE_18M_INDEX }, | 
|  | { -85, IWL_RATE_12M_INDEX }, | 
|  | { -86, IWL_RATE_11M_INDEX }, | 
|  | { -88, IWL_RATE_5M_INDEX  }, | 
|  | { -90, IWL_RATE_2M_INDEX  }, | 
|  | { S8_MIN, IWL_RATE_1M_INDEX }, | 
|  | }; | 
|  |  | 
|  | static const struct rs_init_rate_info rs_optimal_rates_5ghz_legacy[] = { | 
|  | { -60, IWL_RATE_54M_INDEX }, | 
|  | { -64, IWL_RATE_48M_INDEX }, | 
|  | { -72, IWL_RATE_36M_INDEX }, | 
|  | { -80, IWL_RATE_24M_INDEX }, | 
|  | { -84, IWL_RATE_18M_INDEX }, | 
|  | { -85, IWL_RATE_12M_INDEX }, | 
|  | { -87, IWL_RATE_9M_INDEX  }, | 
|  | { S8_MIN, IWL_RATE_6M_INDEX }, | 
|  | }; | 
|  |  | 
|  | static const struct rs_init_rate_info rs_optimal_rates_ht[] = { | 
|  | { -60, IWL_RATE_MCS_7_INDEX }, | 
|  | { -64, IWL_RATE_MCS_6_INDEX }, | 
|  | { -68, IWL_RATE_MCS_5_INDEX }, | 
|  | { -72, IWL_RATE_MCS_4_INDEX }, | 
|  | { -80, IWL_RATE_MCS_3_INDEX }, | 
|  | { -84, IWL_RATE_MCS_2_INDEX }, | 
|  | { -85, IWL_RATE_MCS_1_INDEX }, | 
|  | { S8_MIN, IWL_RATE_MCS_0_INDEX}, | 
|  | }; | 
|  |  | 
|  | /* MCS index 9 is not valid for 20MHz VHT channel width, | 
|  | * but is ok for 40, 80 and 160MHz channels. | 
|  | */ | 
|  | static const struct rs_init_rate_info rs_optimal_rates_vht_20mhz[] = { | 
|  | { -60, IWL_RATE_MCS_8_INDEX }, | 
|  | { -64, IWL_RATE_MCS_7_INDEX }, | 
|  | { -68, IWL_RATE_MCS_6_INDEX }, | 
|  | { -72, IWL_RATE_MCS_5_INDEX }, | 
|  | { -80, IWL_RATE_MCS_4_INDEX }, | 
|  | { -84, IWL_RATE_MCS_3_INDEX }, | 
|  | { -85, IWL_RATE_MCS_2_INDEX }, | 
|  | { -87, IWL_RATE_MCS_1_INDEX }, | 
|  | { S8_MIN, IWL_RATE_MCS_0_INDEX}, | 
|  | }; | 
|  |  | 
|  | static const struct rs_init_rate_info rs_optimal_rates_vht[] = { | 
|  | { -60, IWL_RATE_MCS_9_INDEX }, | 
|  | { -64, IWL_RATE_MCS_8_INDEX }, | 
|  | { -68, IWL_RATE_MCS_7_INDEX }, | 
|  | { -72, IWL_RATE_MCS_6_INDEX }, | 
|  | { -80, IWL_RATE_MCS_5_INDEX }, | 
|  | { -84, IWL_RATE_MCS_4_INDEX }, | 
|  | { -85, IWL_RATE_MCS_3_INDEX }, | 
|  | { -87, IWL_RATE_MCS_2_INDEX }, | 
|  | { -88, IWL_RATE_MCS_1_INDEX }, | 
|  | { S8_MIN, IWL_RATE_MCS_0_INDEX }, | 
|  | }; | 
|  |  | 
|  | #define IWL_RS_LOW_RSSI_THRESHOLD (-76) /* dBm */ | 
|  |  | 
|  | /* Init the optimal rate based on STA caps | 
|  | * This combined with rssi is used to report the last tx rate | 
|  | * to userspace when we haven't transmitted enough frames. | 
|  | */ | 
|  | static void rs_init_optimal_rate(struct iwl_mvm *mvm, | 
|  | struct ieee80211_sta *sta, | 
|  | struct iwl_lq_sta *lq_sta) | 
|  | { | 
|  | struct rs_rate *rate = &lq_sta->optimal_rate; | 
|  |  | 
|  | if (lq_sta->max_mimo2_rate_idx != IWL_RATE_INVALID) | 
|  | rate->type = lq_sta->is_vht ? LQ_VHT_MIMO2 : LQ_HT_MIMO2; | 
|  | else if (lq_sta->max_siso_rate_idx != IWL_RATE_INVALID) | 
|  | rate->type = lq_sta->is_vht ? LQ_VHT_SISO : LQ_HT_SISO; | 
|  | else if (lq_sta->band == NL80211_BAND_5GHZ) | 
|  | rate->type = LQ_LEGACY_A; | 
|  | else | 
|  | rate->type = LQ_LEGACY_G; | 
|  |  | 
|  | rate->bw = rs_bw_from_sta_bw(sta); | 
|  | rate->sgi = rs_sgi_allow(mvm, sta, rate, NULL); | 
|  |  | 
|  | /* ANT/LDPC/STBC aren't relevant for the rate reported to userspace */ | 
|  |  | 
|  | if (is_mimo(rate)) { | 
|  | lq_sta->optimal_rate_mask = lq_sta->active_mimo2_rate; | 
|  | } else if (is_siso(rate)) { | 
|  | lq_sta->optimal_rate_mask = lq_sta->active_siso_rate; | 
|  | } else { | 
|  | lq_sta->optimal_rate_mask = lq_sta->active_legacy_rate; | 
|  |  | 
|  | if (lq_sta->band == NL80211_BAND_5GHZ) { | 
|  | lq_sta->optimal_rates = rs_optimal_rates_5ghz_legacy; | 
|  | lq_sta->optimal_nentries = | 
|  | ARRAY_SIZE(rs_optimal_rates_5ghz_legacy); | 
|  | } else { | 
|  | lq_sta->optimal_rates = rs_optimal_rates_24ghz_legacy; | 
|  | lq_sta->optimal_nentries = | 
|  | ARRAY_SIZE(rs_optimal_rates_24ghz_legacy); | 
|  | } | 
|  | } | 
|  |  | 
|  | if (is_vht(rate)) { | 
|  | if (rate->bw == RATE_MCS_CHAN_WIDTH_20) { | 
|  | lq_sta->optimal_rates = rs_optimal_rates_vht_20mhz; | 
|  | lq_sta->optimal_nentries = | 
|  | ARRAY_SIZE(rs_optimal_rates_vht_20mhz); | 
|  | } else { | 
|  | lq_sta->optimal_rates = rs_optimal_rates_vht; | 
|  | lq_sta->optimal_nentries = | 
|  | ARRAY_SIZE(rs_optimal_rates_vht); | 
|  | } | 
|  | } else if (is_ht(rate)) { | 
|  | lq_sta->optimal_rates = rs_optimal_rates_ht; | 
|  | lq_sta->optimal_nentries = ARRAY_SIZE(rs_optimal_rates_ht); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Compute the optimal rate index based on RSSI */ | 
|  | static struct rs_rate *rs_get_optimal_rate(struct iwl_mvm *mvm, | 
|  | struct iwl_lq_sta *lq_sta) | 
|  | { | 
|  | struct rs_rate *rate = &lq_sta->optimal_rate; | 
|  | int i; | 
|  |  | 
|  | rate->index = find_first_bit(&lq_sta->optimal_rate_mask, | 
|  | BITS_PER_LONG); | 
|  |  | 
|  | for (i = 0; i < lq_sta->optimal_nentries; i++) { | 
|  | int rate_idx = lq_sta->optimal_rates[i].rate_idx; | 
|  |  | 
|  | if ((lq_sta->pers.last_rssi >= lq_sta->optimal_rates[i].rssi) && | 
|  | (BIT(rate_idx) & lq_sta->optimal_rate_mask)) { | 
|  | rate->index = rate_idx; | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | return rate; | 
|  | } | 
|  |  | 
|  | /* Choose an initial legacy rate and antenna to use based on the RSSI | 
|  | * of last Rx | 
|  | */ | 
|  | static void rs_get_initial_rate(struct iwl_mvm *mvm, | 
|  | struct ieee80211_sta *sta, | 
|  | struct iwl_lq_sta *lq_sta, | 
|  | enum nl80211_band band, | 
|  | struct rs_rate *rate) | 
|  | { | 
|  | int i, nentries; | 
|  | unsigned long active_rate; | 
|  | s8 best_rssi = S8_MIN; | 
|  | u8 best_ant = ANT_NONE; | 
|  | u8 valid_tx_ant = iwl_mvm_get_valid_tx_ant(mvm); | 
|  | const struct rs_init_rate_info *initial_rates; | 
|  |  | 
|  | for (i = 0; i < ARRAY_SIZE(lq_sta->pers.chain_signal); i++) { | 
|  | if (!(lq_sta->pers.chains & BIT(i))) | 
|  | continue; | 
|  |  | 
|  | if (lq_sta->pers.chain_signal[i] > best_rssi) { | 
|  | best_rssi = lq_sta->pers.chain_signal[i]; | 
|  | best_ant = BIT(i); | 
|  | } | 
|  | } | 
|  |  | 
|  | IWL_DEBUG_RATE(mvm, "Best ANT: %s Best RSSI: %d\n", | 
|  | rs_pretty_ant(best_ant), best_rssi); | 
|  |  | 
|  | if (best_ant != ANT_A && best_ant != ANT_B) | 
|  | rate->ant = first_antenna(valid_tx_ant); | 
|  | else | 
|  | rate->ant = best_ant; | 
|  |  | 
|  | rate->sgi = false; | 
|  | rate->ldpc = false; | 
|  | rate->bw = RATE_MCS_CHAN_WIDTH_20; | 
|  |  | 
|  | rate->index = find_first_bit(&lq_sta->active_legacy_rate, | 
|  | BITS_PER_LONG); | 
|  |  | 
|  | if (band == NL80211_BAND_5GHZ) { | 
|  | rate->type = LQ_LEGACY_A; | 
|  | initial_rates = rs_optimal_rates_5ghz_legacy; | 
|  | nentries = ARRAY_SIZE(rs_optimal_rates_5ghz_legacy); | 
|  | } else { | 
|  | rate->type = LQ_LEGACY_G; | 
|  | initial_rates = rs_optimal_rates_24ghz_legacy; | 
|  | nentries = ARRAY_SIZE(rs_optimal_rates_24ghz_legacy); | 
|  | } | 
|  |  | 
|  | if (!IWL_MVM_RS_RSSI_BASED_INIT_RATE) | 
|  | goto out; | 
|  |  | 
|  | /* Start from a higher rate if the corresponding debug capability | 
|  | * is enabled. The rate is chosen according to AP capabilities. | 
|  | * In case of VHT/HT when the rssi is low fallback to the case of | 
|  | * legacy rates. | 
|  | */ | 
|  | if (sta->vht_cap.vht_supported && | 
|  | best_rssi > IWL_RS_LOW_RSSI_THRESHOLD) { | 
|  | switch (sta->bandwidth) { | 
|  | case IEEE80211_STA_RX_BW_160: | 
|  | case IEEE80211_STA_RX_BW_80: | 
|  | case IEEE80211_STA_RX_BW_40: | 
|  | initial_rates = rs_optimal_rates_vht; | 
|  | nentries = ARRAY_SIZE(rs_optimal_rates_vht); | 
|  | break; | 
|  | case IEEE80211_STA_RX_BW_20: | 
|  | initial_rates = rs_optimal_rates_vht_20mhz; | 
|  | nentries = ARRAY_SIZE(rs_optimal_rates_vht_20mhz); | 
|  | break; | 
|  | default: | 
|  | IWL_ERR(mvm, "Invalid BW %d\n", sta->bandwidth); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | active_rate = lq_sta->active_siso_rate; | 
|  | rate->type = LQ_VHT_SISO; | 
|  | rate->bw = rs_bw_from_sta_bw(sta); | 
|  | } else if (sta->ht_cap.ht_supported && | 
|  | best_rssi > IWL_RS_LOW_RSSI_THRESHOLD) { | 
|  | initial_rates = rs_optimal_rates_ht; | 
|  | nentries = ARRAY_SIZE(rs_optimal_rates_ht); | 
|  | active_rate = lq_sta->active_siso_rate; | 
|  | rate->type = LQ_HT_SISO; | 
|  | } else { | 
|  | active_rate = lq_sta->active_legacy_rate; | 
|  | } | 
|  |  | 
|  | for (i = 0; i < nentries; i++) { | 
|  | int rate_idx = initial_rates[i].rate_idx; | 
|  |  | 
|  | if ((best_rssi >= initial_rates[i].rssi) && | 
|  | (BIT(rate_idx) & active_rate)) { | 
|  | rate->index = rate_idx; | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | out: | 
|  | rs_dump_rate(mvm, rate, "INITIAL"); | 
|  | } | 
|  |  | 
|  | /* Save info about RSSI of last Rx */ | 
|  | void rs_update_last_rssi(struct iwl_mvm *mvm, | 
|  | struct iwl_lq_sta *lq_sta, | 
|  | struct ieee80211_rx_status *rx_status) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | lq_sta->pers.chains = rx_status->chains; | 
|  | lq_sta->pers.chain_signal[0] = rx_status->chain_signal[0]; | 
|  | lq_sta->pers.chain_signal[1] = rx_status->chain_signal[1]; | 
|  | lq_sta->pers.chain_signal[2] = rx_status->chain_signal[2]; | 
|  | lq_sta->pers.last_rssi = S8_MIN; | 
|  |  | 
|  | for (i = 0; i < ARRAY_SIZE(lq_sta->pers.chain_signal); i++) { | 
|  | if (!(lq_sta->pers.chains & BIT(i))) | 
|  | continue; | 
|  |  | 
|  | if (lq_sta->pers.chain_signal[i] > lq_sta->pers.last_rssi) | 
|  | lq_sta->pers.last_rssi = lq_sta->pers.chain_signal[i]; | 
|  | } | 
|  | } | 
|  |  | 
|  | /** | 
|  | * rs_initialize_lq - Initialize a station's hardware rate table | 
|  | * | 
|  | * The uCode's station table contains a table of fallback rates | 
|  | * for automatic fallback during transmission. | 
|  | * | 
|  | * NOTE: This sets up a default set of values.  These will be replaced later | 
|  | *       if the driver's iwl-agn-rs rate scaling algorithm is used, instead of | 
|  | *       rc80211_simple. | 
|  | * | 
|  | * NOTE: Run REPLY_ADD_STA command to set up station table entry, before | 
|  | *       calling this function (which runs REPLY_TX_LINK_QUALITY_CMD, | 
|  | *       which requires station table entry to exist). | 
|  | */ | 
|  | static void rs_initialize_lq(struct iwl_mvm *mvm, | 
|  | struct ieee80211_sta *sta, | 
|  | struct iwl_lq_sta *lq_sta, | 
|  | enum nl80211_band band, | 
|  | bool init) | 
|  | { | 
|  | struct iwl_scale_tbl_info *tbl; | 
|  | struct rs_rate *rate; | 
|  | u8 active_tbl = 0; | 
|  |  | 
|  | if (!sta || !lq_sta) | 
|  | return; | 
|  |  | 
|  | if (!lq_sta->search_better_tbl) | 
|  | active_tbl = lq_sta->active_tbl; | 
|  | else | 
|  | active_tbl = 1 - lq_sta->active_tbl; | 
|  |  | 
|  | tbl = &(lq_sta->lq_info[active_tbl]); | 
|  | rate = &tbl->rate; | 
|  |  | 
|  | rs_get_initial_rate(mvm, sta, lq_sta, band, rate); | 
|  | rs_init_optimal_rate(mvm, sta, lq_sta); | 
|  |  | 
|  | WARN_ON_ONCE(rate->ant != ANT_A && rate->ant != ANT_B); | 
|  | tbl->column = rs_get_column_from_rate(rate); | 
|  |  | 
|  | rs_set_expected_tpt_table(lq_sta, tbl); | 
|  | rs_fill_lq_cmd(mvm, sta, lq_sta, rate); | 
|  | /* TODO restore station should remember the lq cmd */ | 
|  | iwl_mvm_send_lq_cmd(mvm, &lq_sta->lq, init); | 
|  | } | 
|  |  | 
|  | static void rs_get_rate(void *mvm_r, struct ieee80211_sta *sta, void *mvm_sta, | 
|  | struct ieee80211_tx_rate_control *txrc) | 
|  | { | 
|  | struct sk_buff *skb = txrc->skb; | 
|  | struct iwl_op_mode *op_mode __maybe_unused = | 
|  | (struct iwl_op_mode *)mvm_r; | 
|  | struct iwl_mvm *mvm __maybe_unused = IWL_OP_MODE_GET_MVM(op_mode); | 
|  | struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); | 
|  | struct iwl_lq_sta *lq_sta = mvm_sta; | 
|  | struct rs_rate *optimal_rate; | 
|  | u32 last_ucode_rate; | 
|  |  | 
|  | if (sta && !iwl_mvm_sta_from_mac80211(sta)->vif) { | 
|  | /* if vif isn't initialized mvm doesn't know about | 
|  | * this station, so don't do anything with the it | 
|  | */ | 
|  | sta = NULL; | 
|  | mvm_sta = NULL; | 
|  | } | 
|  |  | 
|  | /* TODO: handle rate_idx_mask and rate_idx_mcs_mask */ | 
|  |  | 
|  | /* Treat uninitialized rate scaling data same as non-existing. */ | 
|  | if (lq_sta && !lq_sta->pers.drv) { | 
|  | IWL_DEBUG_RATE(mvm, "Rate scaling not initialized yet.\n"); | 
|  | mvm_sta = NULL; | 
|  | } | 
|  |  | 
|  | /* Send management frames and NO_ACK data using lowest rate. */ | 
|  | if (rate_control_send_low(sta, mvm_sta, txrc)) | 
|  | return; | 
|  |  | 
|  | iwl_mvm_hwrate_to_tx_rate(lq_sta->last_rate_n_flags, | 
|  | info->band, &info->control.rates[0]); | 
|  | info->control.rates[0].count = 1; | 
|  |  | 
|  | /* Report the optimal rate based on rssi and STA caps if we haven't | 
|  | * converged yet (too little traffic) or exploring other modulations | 
|  | */ | 
|  | if (lq_sta->rs_state != RS_STATE_STAY_IN_COLUMN) { | 
|  | optimal_rate = rs_get_optimal_rate(mvm, lq_sta); | 
|  | last_ucode_rate = ucode_rate_from_rs_rate(mvm, | 
|  | optimal_rate); | 
|  | iwl_mvm_hwrate_to_tx_rate(last_ucode_rate, info->band, | 
|  | &txrc->reported_rate); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void *rs_alloc_sta(void *mvm_rate, struct ieee80211_sta *sta, | 
|  | gfp_t gfp) | 
|  | { | 
|  | struct iwl_mvm_sta *sta_priv = iwl_mvm_sta_from_mac80211(sta); | 
|  | struct iwl_op_mode *op_mode = (struct iwl_op_mode *)mvm_rate; | 
|  | struct iwl_mvm *mvm  = IWL_OP_MODE_GET_MVM(op_mode); | 
|  | struct iwl_lq_sta *lq_sta = &sta_priv->lq_sta; | 
|  |  | 
|  | IWL_DEBUG_RATE(mvm, "create station rate scale window\n"); | 
|  |  | 
|  | lq_sta->pers.drv = mvm; | 
|  | #ifdef CONFIG_MAC80211_DEBUGFS | 
|  | lq_sta->pers.dbg_fixed_rate = 0; | 
|  | lq_sta->pers.dbg_fixed_txp_reduction = TPC_INVALID; | 
|  | lq_sta->pers.ss_force = RS_SS_FORCE_NONE; | 
|  | #endif | 
|  | lq_sta->pers.chains = 0; | 
|  | memset(lq_sta->pers.chain_signal, 0, sizeof(lq_sta->pers.chain_signal)); | 
|  | lq_sta->pers.last_rssi = S8_MIN; | 
|  |  | 
|  | return &sta_priv->lq_sta; | 
|  | } | 
|  |  | 
|  | static int rs_vht_highest_rx_mcs_index(struct ieee80211_sta_vht_cap *vht_cap, | 
|  | int nss) | 
|  | { | 
|  | u16 rx_mcs = le16_to_cpu(vht_cap->vht_mcs.rx_mcs_map) & | 
|  | (0x3 << (2 * (nss - 1))); | 
|  | rx_mcs >>= (2 * (nss - 1)); | 
|  |  | 
|  | if (rx_mcs == IEEE80211_VHT_MCS_SUPPORT_0_7) | 
|  | return IWL_RATE_MCS_7_INDEX; | 
|  | else if (rx_mcs == IEEE80211_VHT_MCS_SUPPORT_0_8) | 
|  | return IWL_RATE_MCS_8_INDEX; | 
|  | else if (rx_mcs == IEEE80211_VHT_MCS_SUPPORT_0_9) | 
|  | return IWL_RATE_MCS_9_INDEX; | 
|  |  | 
|  | WARN_ON_ONCE(rx_mcs != IEEE80211_VHT_MCS_NOT_SUPPORTED); | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | static void rs_vht_set_enabled_rates(struct ieee80211_sta *sta, | 
|  | struct ieee80211_sta_vht_cap *vht_cap, | 
|  | struct iwl_lq_sta *lq_sta) | 
|  | { | 
|  | int i; | 
|  | int highest_mcs = rs_vht_highest_rx_mcs_index(vht_cap, 1); | 
|  |  | 
|  | if (highest_mcs >= IWL_RATE_MCS_0_INDEX) { | 
|  | for (i = IWL_RATE_MCS_0_INDEX; i <= highest_mcs; i++) { | 
|  | if (i == IWL_RATE_9M_INDEX) | 
|  | continue; | 
|  |  | 
|  | /* VHT MCS9 isn't valid for 20Mhz for NSS=1,2 */ | 
|  | if (i == IWL_RATE_MCS_9_INDEX && | 
|  | sta->bandwidth == IEEE80211_STA_RX_BW_20) | 
|  | continue; | 
|  |  | 
|  | lq_sta->active_siso_rate |= BIT(i); | 
|  | } | 
|  | } | 
|  |  | 
|  | if (sta->rx_nss < 2) | 
|  | return; | 
|  |  | 
|  | highest_mcs = rs_vht_highest_rx_mcs_index(vht_cap, 2); | 
|  | if (highest_mcs >= IWL_RATE_MCS_0_INDEX) { | 
|  | for (i = IWL_RATE_MCS_0_INDEX; i <= highest_mcs; i++) { | 
|  | if (i == IWL_RATE_9M_INDEX) | 
|  | continue; | 
|  |  | 
|  | /* VHT MCS9 isn't valid for 20Mhz for NSS=1,2 */ | 
|  | if (i == IWL_RATE_MCS_9_INDEX && | 
|  | sta->bandwidth == IEEE80211_STA_RX_BW_20) | 
|  | continue; | 
|  |  | 
|  | lq_sta->active_mimo2_rate |= BIT(i); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | static void rs_ht_init(struct iwl_mvm *mvm, | 
|  | struct ieee80211_sta *sta, | 
|  | struct iwl_lq_sta *lq_sta, | 
|  | struct ieee80211_sta_ht_cap *ht_cap) | 
|  | { | 
|  | /* active_siso_rate mask includes 9 MBits (bit 5), | 
|  | * and CCK (bits 0-3), supp_rates[] does not; | 
|  | * shift to convert format, force 9 MBits off. | 
|  | */ | 
|  | lq_sta->active_siso_rate = ht_cap->mcs.rx_mask[0] << 1; | 
|  | lq_sta->active_siso_rate |= ht_cap->mcs.rx_mask[0] & 0x1; | 
|  | lq_sta->active_siso_rate &= ~((u16)0x2); | 
|  | lq_sta->active_siso_rate <<= IWL_FIRST_OFDM_RATE; | 
|  |  | 
|  | lq_sta->active_mimo2_rate = ht_cap->mcs.rx_mask[1] << 1; | 
|  | lq_sta->active_mimo2_rate |= ht_cap->mcs.rx_mask[1] & 0x1; | 
|  | lq_sta->active_mimo2_rate &= ~((u16)0x2); | 
|  | lq_sta->active_mimo2_rate <<= IWL_FIRST_OFDM_RATE; | 
|  |  | 
|  | if (mvm->cfg->ht_params->ldpc && | 
|  | (ht_cap->cap & IEEE80211_HT_CAP_LDPC_CODING)) | 
|  | lq_sta->ldpc = true; | 
|  |  | 
|  | if (mvm->cfg->ht_params->stbc && | 
|  | (num_of_ant(iwl_mvm_get_valid_tx_ant(mvm)) > 1) && | 
|  | (ht_cap->cap & IEEE80211_HT_CAP_RX_STBC)) | 
|  | lq_sta->stbc_capable = true; | 
|  |  | 
|  | lq_sta->is_vht = false; | 
|  | } | 
|  |  | 
|  | static void rs_vht_init(struct iwl_mvm *mvm, | 
|  | struct ieee80211_sta *sta, | 
|  | struct iwl_lq_sta *lq_sta, | 
|  | struct ieee80211_sta_vht_cap *vht_cap) | 
|  | { | 
|  | rs_vht_set_enabled_rates(sta, vht_cap, lq_sta); | 
|  |  | 
|  | if (mvm->cfg->ht_params->ldpc && | 
|  | (vht_cap->cap & IEEE80211_VHT_CAP_RXLDPC)) | 
|  | lq_sta->ldpc = true; | 
|  |  | 
|  | if (mvm->cfg->ht_params->stbc && | 
|  | (num_of_ant(iwl_mvm_get_valid_tx_ant(mvm)) > 1) && | 
|  | (vht_cap->cap & IEEE80211_VHT_CAP_RXSTBC_MASK)) | 
|  | lq_sta->stbc_capable = true; | 
|  |  | 
|  | if (fw_has_capa(&mvm->fw->ucode_capa, IWL_UCODE_TLV_CAPA_BEAMFORMER) && | 
|  | (num_of_ant(iwl_mvm_get_valid_tx_ant(mvm)) > 1) && | 
|  | (vht_cap->cap & IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE)) | 
|  | lq_sta->bfer_capable = true; | 
|  |  | 
|  | lq_sta->is_vht = true; | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_IWLWIFI_DEBUGFS | 
|  | static void iwl_mvm_reset_frame_stats(struct iwl_mvm *mvm) | 
|  | { | 
|  | spin_lock_bh(&mvm->drv_stats_lock); | 
|  | memset(&mvm->drv_rx_stats, 0, sizeof(mvm->drv_rx_stats)); | 
|  | spin_unlock_bh(&mvm->drv_stats_lock); | 
|  | } | 
|  |  | 
|  | void iwl_mvm_update_frame_stats(struct iwl_mvm *mvm, u32 rate, bool agg) | 
|  | { | 
|  | u8 nss = 0, mcs = 0; | 
|  |  | 
|  | spin_lock(&mvm->drv_stats_lock); | 
|  |  | 
|  | if (agg) | 
|  | mvm->drv_rx_stats.agg_frames++; | 
|  |  | 
|  | mvm->drv_rx_stats.success_frames++; | 
|  |  | 
|  | switch (rate & RATE_MCS_CHAN_WIDTH_MSK) { | 
|  | case RATE_MCS_CHAN_WIDTH_20: | 
|  | mvm->drv_rx_stats.bw_20_frames++; | 
|  | break; | 
|  | case RATE_MCS_CHAN_WIDTH_40: | 
|  | mvm->drv_rx_stats.bw_40_frames++; | 
|  | break; | 
|  | case RATE_MCS_CHAN_WIDTH_80: | 
|  | mvm->drv_rx_stats.bw_80_frames++; | 
|  | break; | 
|  | case RATE_MCS_CHAN_WIDTH_160: | 
|  | mvm->drv_rx_stats.bw_160_frames++; | 
|  | break; | 
|  | default: | 
|  | WARN_ONCE(1, "bad BW. rate 0x%x", rate); | 
|  | } | 
|  |  | 
|  | if (rate & RATE_MCS_HT_MSK) { | 
|  | mvm->drv_rx_stats.ht_frames++; | 
|  | mcs = rate & RATE_HT_MCS_RATE_CODE_MSK; | 
|  | nss = ((rate & RATE_HT_MCS_NSS_MSK) >> RATE_HT_MCS_NSS_POS) + 1; | 
|  | } else if (rate & RATE_MCS_VHT_MSK) { | 
|  | mvm->drv_rx_stats.vht_frames++; | 
|  | mcs = rate & RATE_VHT_MCS_RATE_CODE_MSK; | 
|  | nss = ((rate & RATE_VHT_MCS_NSS_MSK) >> | 
|  | RATE_VHT_MCS_NSS_POS) + 1; | 
|  | } else { | 
|  | mvm->drv_rx_stats.legacy_frames++; | 
|  | } | 
|  |  | 
|  | if (nss == 1) | 
|  | mvm->drv_rx_stats.siso_frames++; | 
|  | else if (nss == 2) | 
|  | mvm->drv_rx_stats.mimo2_frames++; | 
|  |  | 
|  | if (rate & RATE_MCS_SGI_MSK) | 
|  | mvm->drv_rx_stats.sgi_frames++; | 
|  | else | 
|  | mvm->drv_rx_stats.ngi_frames++; | 
|  |  | 
|  | mvm->drv_rx_stats.last_rates[mvm->drv_rx_stats.last_frame_idx] = rate; | 
|  | mvm->drv_rx_stats.last_frame_idx = | 
|  | (mvm->drv_rx_stats.last_frame_idx + 1) % | 
|  | ARRAY_SIZE(mvm->drv_rx_stats.last_rates); | 
|  |  | 
|  | spin_unlock(&mvm->drv_stats_lock); | 
|  | } | 
|  | #endif | 
|  |  | 
|  | /* | 
|  | * Called after adding a new station to initialize rate scaling | 
|  | */ | 
|  | void iwl_mvm_rs_rate_init(struct iwl_mvm *mvm, struct ieee80211_sta *sta, | 
|  | enum nl80211_band band, bool init) | 
|  | { | 
|  | int i, j; | 
|  | struct ieee80211_hw *hw = mvm->hw; | 
|  | struct ieee80211_sta_ht_cap *ht_cap = &sta->ht_cap; | 
|  | struct ieee80211_sta_vht_cap *vht_cap = &sta->vht_cap; | 
|  | struct iwl_mvm_sta *sta_priv = iwl_mvm_sta_from_mac80211(sta); | 
|  | struct iwl_lq_sta *lq_sta = &sta_priv->lq_sta; | 
|  | struct ieee80211_supported_band *sband; | 
|  | unsigned long supp; /* must be unsigned long for for_each_set_bit */ | 
|  |  | 
|  | /* clear all non-persistent lq data */ | 
|  | memset(lq_sta, 0, offsetof(typeof(*lq_sta), pers)); | 
|  |  | 
|  | sband = hw->wiphy->bands[band]; | 
|  |  | 
|  | lq_sta->lq.sta_id = sta_priv->sta_id; | 
|  | sta_priv->tlc_amsdu = false; | 
|  |  | 
|  | for (j = 0; j < LQ_SIZE; j++) | 
|  | rs_rate_scale_clear_tbl_windows(mvm, &lq_sta->lq_info[j]); | 
|  |  | 
|  | lq_sta->flush_timer = 0; | 
|  | lq_sta->last_tx = jiffies; | 
|  |  | 
|  | IWL_DEBUG_RATE(mvm, | 
|  | "LQ: *** rate scale station global init for station %d ***\n", | 
|  | sta_priv->sta_id); | 
|  | /* TODO: what is a good starting rate for STA? About middle? Maybe not | 
|  | * the lowest or the highest rate.. Could consider using RSSI from | 
|  | * previous packets? Need to have IEEE 802.1X auth succeed immediately | 
|  | * after assoc.. */ | 
|  |  | 
|  | lq_sta->missed_rate_counter = IWL_MVM_RS_MISSED_RATE_MAX; | 
|  | lq_sta->band = sband->band; | 
|  | /* | 
|  | * active legacy rates as per supported rates bitmap | 
|  | */ | 
|  | supp = sta->supp_rates[sband->band]; | 
|  | lq_sta->active_legacy_rate = 0; | 
|  | for_each_set_bit(i, &supp, BITS_PER_LONG) | 
|  | lq_sta->active_legacy_rate |= BIT(sband->bitrates[i].hw_value); | 
|  |  | 
|  | /* TODO: should probably account for rx_highest for both HT/VHT */ | 
|  | if (!vht_cap || !vht_cap->vht_supported) | 
|  | rs_ht_init(mvm, sta, lq_sta, ht_cap); | 
|  | else | 
|  | rs_vht_init(mvm, sta, lq_sta, vht_cap); | 
|  |  | 
|  | lq_sta->max_legacy_rate_idx = | 
|  | rs_get_max_rate_from_mask(lq_sta->active_legacy_rate); | 
|  | lq_sta->max_siso_rate_idx = | 
|  | rs_get_max_rate_from_mask(lq_sta->active_siso_rate); | 
|  | lq_sta->max_mimo2_rate_idx = | 
|  | rs_get_max_rate_from_mask(lq_sta->active_mimo2_rate); | 
|  |  | 
|  | IWL_DEBUG_RATE(mvm, | 
|  | "LEGACY=%lX SISO=%lX MIMO2=%lX VHT=%d LDPC=%d STBC=%d BFER=%d\n", | 
|  | lq_sta->active_legacy_rate, | 
|  | lq_sta->active_siso_rate, | 
|  | lq_sta->active_mimo2_rate, | 
|  | lq_sta->is_vht, lq_sta->ldpc, lq_sta->stbc_capable, | 
|  | lq_sta->bfer_capable); | 
|  | IWL_DEBUG_RATE(mvm, "MAX RATE: LEGACY=%d SISO=%d MIMO2=%d\n", | 
|  | lq_sta->max_legacy_rate_idx, | 
|  | lq_sta->max_siso_rate_idx, | 
|  | lq_sta->max_mimo2_rate_idx); | 
|  |  | 
|  | /* These values will be overridden later */ | 
|  | lq_sta->lq.single_stream_ant_msk = | 
|  | first_antenna(iwl_mvm_get_valid_tx_ant(mvm)); | 
|  | lq_sta->lq.dual_stream_ant_msk = ANT_AB; | 
|  |  | 
|  | /* as default allow aggregation for all tids */ | 
|  | lq_sta->tx_agg_tid_en = IWL_AGG_ALL_TID; | 
|  | lq_sta->is_agg = 0; | 
|  | #ifdef CONFIG_IWLWIFI_DEBUGFS | 
|  | iwl_mvm_reset_frame_stats(mvm); | 
|  | #endif | 
|  | rs_initialize_lq(mvm, sta, lq_sta, band, init); | 
|  | } | 
|  |  | 
|  | static void rs_rate_update(void *mvm_r, | 
|  | struct ieee80211_supported_band *sband, | 
|  | struct cfg80211_chan_def *chandef, | 
|  | struct ieee80211_sta *sta, void *priv_sta, | 
|  | u32 changed) | 
|  | { | 
|  | u8 tid; | 
|  | struct iwl_op_mode *op_mode  = | 
|  | (struct iwl_op_mode *)mvm_r; | 
|  | struct iwl_mvm *mvm = IWL_OP_MODE_GET_MVM(op_mode); | 
|  |  | 
|  | if (!iwl_mvm_sta_from_mac80211(sta)->vif) | 
|  | return; | 
|  |  | 
|  | /* Stop any ongoing aggregations as rs starts off assuming no agg */ | 
|  | for (tid = 0; tid < IWL_MAX_TID_COUNT; tid++) | 
|  | ieee80211_stop_tx_ba_session(sta, tid); | 
|  |  | 
|  | iwl_mvm_rs_rate_init(mvm, sta, sband->band, false); | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_MAC80211_DEBUGFS | 
|  | static void rs_build_rates_table_from_fixed(struct iwl_mvm *mvm, | 
|  | struct iwl_lq_cmd *lq_cmd, | 
|  | enum nl80211_band band, | 
|  | u32 ucode_rate) | 
|  | { | 
|  | struct rs_rate rate; | 
|  | int i; | 
|  | int num_rates = ARRAY_SIZE(lq_cmd->rs_table); | 
|  | __le32 ucode_rate_le32 = cpu_to_le32(ucode_rate); | 
|  | u8 ant = (ucode_rate & RATE_MCS_ANT_ABC_MSK) >> RATE_MCS_ANT_POS; | 
|  |  | 
|  | for (i = 0; i < num_rates; i++) | 
|  | lq_cmd->rs_table[i] = ucode_rate_le32; | 
|  |  | 
|  | rs_rate_from_ucode_rate(ucode_rate, band, &rate); | 
|  |  | 
|  | if (is_mimo(&rate)) | 
|  | lq_cmd->mimo_delim = num_rates - 1; | 
|  | else | 
|  | lq_cmd->mimo_delim = 0; | 
|  |  | 
|  | lq_cmd->reduced_tpc = 0; | 
|  |  | 
|  | if (num_of_ant(ant) == 1) | 
|  | lq_cmd->single_stream_ant_msk = ant; | 
|  |  | 
|  | lq_cmd->agg_frame_cnt_limit = LINK_QUAL_AGG_FRAME_LIMIT_DEF; | 
|  | } | 
|  | #endif /* CONFIG_MAC80211_DEBUGFS */ | 
|  |  | 
|  | static void rs_fill_rates_for_column(struct iwl_mvm *mvm, | 
|  | struct iwl_lq_sta *lq_sta, | 
|  | struct rs_rate *rate, | 
|  | __le32 *rs_table, int *rs_table_index, | 
|  | int num_rates, int num_retries, | 
|  | u8 valid_tx_ant, bool toggle_ant) | 
|  | { | 
|  | int i, j; | 
|  | __le32 ucode_rate; | 
|  | bool bottom_reached = false; | 
|  | int prev_rate_idx = rate->index; | 
|  | int end = LINK_QUAL_MAX_RETRY_NUM; | 
|  | int index = *rs_table_index; | 
|  |  | 
|  | for (i = 0; i < num_rates && index < end; i++) { | 
|  | for (j = 0; j < num_retries && index < end; j++, index++) { | 
|  | ucode_rate = cpu_to_le32(ucode_rate_from_rs_rate(mvm, | 
|  | rate)); | 
|  | rs_table[index] = ucode_rate; | 
|  | if (toggle_ant) | 
|  | rs_toggle_antenna(valid_tx_ant, rate); | 
|  | } | 
|  |  | 
|  | prev_rate_idx = rate->index; | 
|  | bottom_reached = rs_get_lower_rate_in_column(lq_sta, rate); | 
|  | if (bottom_reached && !is_legacy(rate)) | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (!bottom_reached && !is_legacy(rate)) | 
|  | rate->index = prev_rate_idx; | 
|  |  | 
|  | *rs_table_index = index; | 
|  | } | 
|  |  | 
|  | /* Building the rate table is non trivial. When we're in MIMO2/VHT/80Mhz/SGI | 
|  | * column the rate table should look like this: | 
|  | * | 
|  | * rate[0] 0x400D019 VHT | ANT: AB BW: 80Mhz MCS: 9 NSS: 2 SGI | 
|  | * rate[1] 0x400D019 VHT | ANT: AB BW: 80Mhz MCS: 9 NSS: 2 SGI | 
|  | * rate[2] 0x400D018 VHT | ANT: AB BW: 80Mhz MCS: 8 NSS: 2 SGI | 
|  | * rate[3] 0x400D018 VHT | ANT: AB BW: 80Mhz MCS: 8 NSS: 2 SGI | 
|  | * rate[4] 0x400D017 VHT | ANT: AB BW: 80Mhz MCS: 7 NSS: 2 SGI | 
|  | * rate[5] 0x400D017 VHT | ANT: AB BW: 80Mhz MCS: 7 NSS: 2 SGI | 
|  | * rate[6] 0x4005007 VHT | ANT: A BW: 80Mhz MCS: 7 NSS: 1 NGI | 
|  | * rate[7] 0x4009006 VHT | ANT: B BW: 80Mhz MCS: 6 NSS: 1 NGI | 
|  | * rate[8] 0x4005005 VHT | ANT: A BW: 80Mhz MCS: 5 NSS: 1 NGI | 
|  | * rate[9] 0x800B Legacy | ANT: B Rate: 36 Mbps | 
|  | * rate[10] 0x4009 Legacy | ANT: A Rate: 24 Mbps | 
|  | * rate[11] 0x8007 Legacy | ANT: B Rate: 18 Mbps | 
|  | * rate[12] 0x4005 Legacy | ANT: A Rate: 12 Mbps | 
|  | * rate[13] 0x800F Legacy | ANT: B Rate: 9 Mbps | 
|  | * rate[14] 0x400D Legacy | ANT: A Rate: 6 Mbps | 
|  | * rate[15] 0x800D Legacy | ANT: B Rate: 6 Mbps | 
|  | */ | 
|  | static void rs_build_rates_table(struct iwl_mvm *mvm, | 
|  | struct ieee80211_sta *sta, | 
|  | struct iwl_lq_sta *lq_sta, | 
|  | const struct rs_rate *initial_rate) | 
|  | { | 
|  | struct rs_rate rate; | 
|  | int num_rates, num_retries, index = 0; | 
|  | u8 valid_tx_ant = 0; | 
|  | struct iwl_lq_cmd *lq_cmd = &lq_sta->lq; | 
|  | bool toggle_ant = false; | 
|  |  | 
|  | memcpy(&rate, initial_rate, sizeof(rate)); | 
|  |  | 
|  | valid_tx_ant = iwl_mvm_get_valid_tx_ant(mvm); | 
|  |  | 
|  | /* TODO: remove old API when min FW API hits 14 */ | 
|  | if (!fw_has_api(&mvm->fw->ucode_capa, IWL_UCODE_TLV_API_LQ_SS_PARAMS) && | 
|  | rs_stbc_allow(mvm, sta, lq_sta)) | 
|  | rate.stbc = true; | 
|  |  | 
|  | if (is_siso(&rate)) { | 
|  | num_rates = IWL_MVM_RS_INITIAL_SISO_NUM_RATES; | 
|  | num_retries = IWL_MVM_RS_HT_VHT_RETRIES_PER_RATE; | 
|  | } else if (is_mimo(&rate)) { | 
|  | num_rates = IWL_MVM_RS_INITIAL_MIMO_NUM_RATES; | 
|  | num_retries = IWL_MVM_RS_HT_VHT_RETRIES_PER_RATE; | 
|  | } else { | 
|  | num_rates = IWL_MVM_RS_INITIAL_LEGACY_NUM_RATES; | 
|  | num_retries = IWL_MVM_RS_INITIAL_LEGACY_RETRIES; | 
|  | toggle_ant = true; | 
|  | } | 
|  |  | 
|  | rs_fill_rates_for_column(mvm, lq_sta, &rate, lq_cmd->rs_table, &index, | 
|  | num_rates, num_retries, valid_tx_ant, | 
|  | toggle_ant); | 
|  |  | 
|  | rs_get_lower_rate_down_column(lq_sta, &rate); | 
|  |  | 
|  | if (is_siso(&rate)) { | 
|  | num_rates = IWL_MVM_RS_SECONDARY_SISO_NUM_RATES; | 
|  | num_retries = IWL_MVM_RS_SECONDARY_SISO_RETRIES; | 
|  | lq_cmd->mimo_delim = index; | 
|  | } else if (is_legacy(&rate)) { | 
|  | num_rates = IWL_MVM_RS_SECONDARY_LEGACY_NUM_RATES; | 
|  | num_retries = IWL_MVM_RS_SECONDARY_LEGACY_RETRIES; | 
|  | } else { | 
|  | WARN_ON_ONCE(1); | 
|  | } | 
|  |  | 
|  | toggle_ant = true; | 
|  |  | 
|  | rs_fill_rates_for_column(mvm, lq_sta, &rate, lq_cmd->rs_table, &index, | 
|  | num_rates, num_retries, valid_tx_ant, | 
|  | toggle_ant); | 
|  |  | 
|  | rs_get_lower_rate_down_column(lq_sta, &rate); | 
|  |  | 
|  | num_rates = IWL_MVM_RS_SECONDARY_LEGACY_NUM_RATES; | 
|  | num_retries = IWL_MVM_RS_SECONDARY_LEGACY_RETRIES; | 
|  |  | 
|  | rs_fill_rates_for_column(mvm, lq_sta, &rate, lq_cmd->rs_table, &index, | 
|  | num_rates, num_retries, valid_tx_ant, | 
|  | toggle_ant); | 
|  |  | 
|  | } | 
|  |  | 
|  | struct rs_bfer_active_iter_data { | 
|  | struct ieee80211_sta *exclude_sta; | 
|  | struct iwl_mvm_sta *bfer_mvmsta; | 
|  | }; | 
|  |  | 
|  | static void rs_bfer_active_iter(void *_data, | 
|  | struct ieee80211_sta *sta) | 
|  | { | 
|  | struct rs_bfer_active_iter_data *data = _data; | 
|  | struct iwl_mvm_sta *mvmsta = iwl_mvm_sta_from_mac80211(sta); | 
|  | struct iwl_lq_cmd *lq_cmd = &mvmsta->lq_sta.lq; | 
|  | u32 ss_params = le32_to_cpu(lq_cmd->ss_params); | 
|  |  | 
|  | if (sta == data->exclude_sta) | 
|  | return; | 
|  |  | 
|  | /* The current sta has BFER allowed */ | 
|  | if (ss_params & LQ_SS_BFER_ALLOWED) { | 
|  | WARN_ON_ONCE(data->bfer_mvmsta != NULL); | 
|  |  | 
|  | data->bfer_mvmsta = mvmsta; | 
|  | } | 
|  | } | 
|  |  | 
|  | static int rs_bfer_priority(struct iwl_mvm_sta *sta) | 
|  | { | 
|  | int prio = -1; | 
|  | enum nl80211_iftype viftype = ieee80211_vif_type_p2p(sta->vif); | 
|  |  | 
|  | switch (viftype) { | 
|  | case NL80211_IFTYPE_AP: | 
|  | case NL80211_IFTYPE_P2P_GO: | 
|  | prio = 3; | 
|  | break; | 
|  | case NL80211_IFTYPE_P2P_CLIENT: | 
|  | prio = 2; | 
|  | break; | 
|  | case NL80211_IFTYPE_STATION: | 
|  | prio = 1; | 
|  | break; | 
|  | default: | 
|  | WARN_ONCE(true, "viftype %d sta_id %d", viftype, sta->sta_id); | 
|  | prio = -1; | 
|  | } | 
|  |  | 
|  | return prio; | 
|  | } | 
|  |  | 
|  | /* Returns >0 if sta1 has a higher BFER priority compared to sta2 */ | 
|  | static int rs_bfer_priority_cmp(struct iwl_mvm_sta *sta1, | 
|  | struct iwl_mvm_sta *sta2) | 
|  | { | 
|  | int prio1 = rs_bfer_priority(sta1); | 
|  | int prio2 = rs_bfer_priority(sta2); | 
|  |  | 
|  | if (prio1 > prio2) | 
|  | return 1; | 
|  | if (prio1 < prio2) | 
|  | return -1; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void rs_set_lq_ss_params(struct iwl_mvm *mvm, | 
|  | struct ieee80211_sta *sta, | 
|  | struct iwl_lq_sta *lq_sta, | 
|  | const struct rs_rate *initial_rate) | 
|  | { | 
|  | struct iwl_lq_cmd *lq_cmd = &lq_sta->lq; | 
|  | struct iwl_mvm_sta *mvmsta = iwl_mvm_sta_from_mac80211(sta); | 
|  | struct rs_bfer_active_iter_data data = { | 
|  | .exclude_sta = sta, | 
|  | .bfer_mvmsta = NULL, | 
|  | }; | 
|  | struct iwl_mvm_sta *bfer_mvmsta = NULL; | 
|  | u32 ss_params = LQ_SS_PARAMS_VALID; | 
|  |  | 
|  | if (!iwl_mvm_bt_coex_is_mimo_allowed(mvm, sta)) | 
|  | goto out; | 
|  |  | 
|  | #ifdef CONFIG_MAC80211_DEBUGFS | 
|  | /* Check if forcing the decision is configured. | 
|  | * Note that SISO is forced by not allowing STBC or BFER | 
|  | */ | 
|  | if (lq_sta->pers.ss_force == RS_SS_FORCE_STBC) | 
|  | ss_params |= (LQ_SS_STBC_1SS_ALLOWED | LQ_SS_FORCE); | 
|  | else if (lq_sta->pers.ss_force == RS_SS_FORCE_BFER) | 
|  | ss_params |= (LQ_SS_BFER_ALLOWED | LQ_SS_FORCE); | 
|  |  | 
|  | if (lq_sta->pers.ss_force != RS_SS_FORCE_NONE) { | 
|  | IWL_DEBUG_RATE(mvm, "Forcing single stream Tx decision %d\n", | 
|  | lq_sta->pers.ss_force); | 
|  | goto out; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | if (lq_sta->stbc_capable) | 
|  | ss_params |= LQ_SS_STBC_1SS_ALLOWED; | 
|  |  | 
|  | if (!lq_sta->bfer_capable) | 
|  | goto out; | 
|  |  | 
|  | ieee80211_iterate_stations_atomic(mvm->hw, | 
|  | rs_bfer_active_iter, | 
|  | &data); | 
|  | bfer_mvmsta = data.bfer_mvmsta; | 
|  |  | 
|  | /* This code is safe as it doesn't run concurrently for different | 
|  | * stations. This is guaranteed by the fact that calls to | 
|  | * ieee80211_tx_status wouldn't run concurrently for a single HW. | 
|  | */ | 
|  | if (!bfer_mvmsta) { | 
|  | IWL_DEBUG_RATE(mvm, "No sta with BFER allowed found. Allow\n"); | 
|  |  | 
|  | ss_params |= LQ_SS_BFER_ALLOWED; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | IWL_DEBUG_RATE(mvm, "Found existing sta %d with BFER activated\n", | 
|  | bfer_mvmsta->sta_id); | 
|  |  | 
|  | /* Disallow BFER on another STA if active and we're a higher priority */ | 
|  | if (rs_bfer_priority_cmp(mvmsta, bfer_mvmsta) > 0) { | 
|  | struct iwl_lq_cmd *bfersta_lq_cmd = &bfer_mvmsta->lq_sta.lq; | 
|  | u32 bfersta_ss_params = le32_to_cpu(bfersta_lq_cmd->ss_params); | 
|  |  | 
|  | bfersta_ss_params &= ~LQ_SS_BFER_ALLOWED; | 
|  | bfersta_lq_cmd->ss_params = cpu_to_le32(bfersta_ss_params); | 
|  | iwl_mvm_send_lq_cmd(mvm, bfersta_lq_cmd, false); | 
|  |  | 
|  | ss_params |= LQ_SS_BFER_ALLOWED; | 
|  | IWL_DEBUG_RATE(mvm, | 
|  | "Lower priority BFER sta found (%d). Switch BFER\n", | 
|  | bfer_mvmsta->sta_id); | 
|  | } | 
|  | out: | 
|  | lq_cmd->ss_params = cpu_to_le32(ss_params); | 
|  | } | 
|  |  | 
|  | static void rs_fill_lq_cmd(struct iwl_mvm *mvm, | 
|  | struct ieee80211_sta *sta, | 
|  | struct iwl_lq_sta *lq_sta, | 
|  | const struct rs_rate *initial_rate) | 
|  | { | 
|  | struct iwl_lq_cmd *lq_cmd = &lq_sta->lq; | 
|  | struct iwl_mvm_sta *mvmsta; | 
|  | struct iwl_mvm_vif *mvmvif; | 
|  |  | 
|  | lq_cmd->agg_disable_start_th = IWL_MVM_RS_AGG_DISABLE_START; | 
|  | lq_cmd->agg_time_limit = | 
|  | cpu_to_le16(IWL_MVM_RS_AGG_TIME_LIMIT); | 
|  |  | 
|  | #ifdef CONFIG_MAC80211_DEBUGFS | 
|  | if (lq_sta->pers.dbg_fixed_rate) { | 
|  | rs_build_rates_table_from_fixed(mvm, lq_cmd, | 
|  | lq_sta->band, | 
|  | lq_sta->pers.dbg_fixed_rate); | 
|  | return; | 
|  | } | 
|  | #endif | 
|  | if (WARN_ON_ONCE(!sta || !initial_rate)) | 
|  | return; | 
|  |  | 
|  | rs_build_rates_table(mvm, sta, lq_sta, initial_rate); | 
|  |  | 
|  | if (fw_has_api(&mvm->fw->ucode_capa, IWL_UCODE_TLV_API_LQ_SS_PARAMS)) | 
|  | rs_set_lq_ss_params(mvm, sta, lq_sta, initial_rate); | 
|  |  | 
|  | mvmsta = iwl_mvm_sta_from_mac80211(sta); | 
|  | mvmvif = iwl_mvm_vif_from_mac80211(mvmsta->vif); | 
|  |  | 
|  | if (num_of_ant(initial_rate->ant) == 1) | 
|  | lq_cmd->single_stream_ant_msk = initial_rate->ant; | 
|  |  | 
|  | lq_cmd->agg_frame_cnt_limit = mvmsta->max_agg_bufsize; | 
|  |  | 
|  | /* | 
|  | * In case of low latency, tell the firmware to leave a frame in the | 
|  | * Tx Fifo so that it can start a transaction in the same TxOP. This | 
|  | * basically allows the firmware to send bursts. | 
|  | */ | 
|  | if (iwl_mvm_vif_low_latency(mvmvif)) | 
|  | lq_cmd->agg_frame_cnt_limit--; | 
|  |  | 
|  | if (mvmsta->vif->p2p) | 
|  | lq_cmd->flags |= LQ_FLAG_USE_RTS_MSK; | 
|  |  | 
|  | lq_cmd->agg_time_limit = | 
|  | cpu_to_le16(iwl_mvm_coex_agg_time_limit(mvm, sta)); | 
|  | } | 
|  |  | 
|  | static void *rs_alloc(struct ieee80211_hw *hw, struct dentry *debugfsdir) | 
|  | { | 
|  | return hw->priv; | 
|  | } | 
|  | /* rate scale requires free function to be implemented */ | 
|  | static void rs_free(void *mvm_rate) | 
|  | { | 
|  | return; | 
|  | } | 
|  |  | 
|  | static void rs_free_sta(void *mvm_r, struct ieee80211_sta *sta, | 
|  | void *mvm_sta) | 
|  | { | 
|  | struct iwl_op_mode *op_mode __maybe_unused = mvm_r; | 
|  | struct iwl_mvm *mvm __maybe_unused = IWL_OP_MODE_GET_MVM(op_mode); | 
|  |  | 
|  | IWL_DEBUG_RATE(mvm, "enter\n"); | 
|  | IWL_DEBUG_RATE(mvm, "leave\n"); | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_MAC80211_DEBUGFS | 
|  | int rs_pretty_print_rate(char *buf, const u32 rate) | 
|  | { | 
|  |  | 
|  | char *type, *bw; | 
|  | u8 mcs = 0, nss = 0; | 
|  | u8 ant = (rate & RATE_MCS_ANT_ABC_MSK) >> RATE_MCS_ANT_POS; | 
|  |  | 
|  | if (!(rate & RATE_MCS_HT_MSK) && | 
|  | !(rate & RATE_MCS_VHT_MSK)) { | 
|  | int index = iwl_hwrate_to_plcp_idx(rate); | 
|  |  | 
|  | return sprintf(buf, "Legacy | ANT: %s Rate: %s Mbps\n", | 
|  | rs_pretty_ant(ant), | 
|  | index == IWL_RATE_INVALID ? "BAD" : | 
|  | iwl_rate_mcs[index].mbps); | 
|  | } | 
|  |  | 
|  | if (rate & RATE_MCS_VHT_MSK) { | 
|  | type = "VHT"; | 
|  | mcs = rate & RATE_VHT_MCS_RATE_CODE_MSK; | 
|  | nss = ((rate & RATE_VHT_MCS_NSS_MSK) | 
|  | >> RATE_VHT_MCS_NSS_POS) + 1; | 
|  | } else if (rate & RATE_MCS_HT_MSK) { | 
|  | type = "HT"; | 
|  | mcs = rate & RATE_HT_MCS_INDEX_MSK; | 
|  | } else { | 
|  | type = "Unknown"; /* shouldn't happen */ | 
|  | } | 
|  |  | 
|  | switch (rate & RATE_MCS_CHAN_WIDTH_MSK) { | 
|  | case RATE_MCS_CHAN_WIDTH_20: | 
|  | bw = "20Mhz"; | 
|  | break; | 
|  | case RATE_MCS_CHAN_WIDTH_40: | 
|  | bw = "40Mhz"; | 
|  | break; | 
|  | case RATE_MCS_CHAN_WIDTH_80: | 
|  | bw = "80Mhz"; | 
|  | break; | 
|  | case RATE_MCS_CHAN_WIDTH_160: | 
|  | bw = "160Mhz"; | 
|  | break; | 
|  | default: | 
|  | bw = "BAD BW"; | 
|  | } | 
|  |  | 
|  | return sprintf(buf, "%s | ANT: %s BW: %s MCS: %d NSS: %d %s%s%s%s%s\n", | 
|  | type, rs_pretty_ant(ant), bw, mcs, nss, | 
|  | (rate & RATE_MCS_SGI_MSK) ? "SGI " : "NGI ", | 
|  | (rate & RATE_MCS_HT_STBC_MSK) ? "STBC " : "", | 
|  | (rate & RATE_MCS_LDPC_MSK) ? "LDPC " : "", | 
|  | (rate & RATE_MCS_BF_MSK) ? "BF " : "", | 
|  | (rate & RATE_MCS_ZLF_MSK) ? "ZLF " : ""); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * Program the device to use fixed rate for frame transmit | 
|  | * This is for debugging/testing only | 
|  | * once the device start use fixed rate, we need to reload the module | 
|  | * to being back the normal operation. | 
|  | */ | 
|  | static void rs_program_fix_rate(struct iwl_mvm *mvm, | 
|  | struct iwl_lq_sta *lq_sta) | 
|  | { | 
|  | lq_sta->active_legacy_rate = 0x0FFF;	/* 1 - 54 MBits, includes CCK */ | 
|  | lq_sta->active_siso_rate   = 0x1FD0;	/* 6 - 60 MBits, no 9, no CCK */ | 
|  | lq_sta->active_mimo2_rate  = 0x1FD0;	/* 6 - 60 MBits, no 9, no CCK */ | 
|  |  | 
|  | IWL_DEBUG_RATE(mvm, "sta_id %d rate 0x%X\n", | 
|  | lq_sta->lq.sta_id, lq_sta->pers.dbg_fixed_rate); | 
|  |  | 
|  | if (lq_sta->pers.dbg_fixed_rate) { | 
|  | rs_fill_lq_cmd(mvm, NULL, lq_sta, NULL); | 
|  | iwl_mvm_send_lq_cmd(lq_sta->pers.drv, &lq_sta->lq, false); | 
|  | } | 
|  | } | 
|  |  | 
|  | static ssize_t rs_sta_dbgfs_scale_table_write(struct file *file, | 
|  | const char __user *user_buf, size_t count, loff_t *ppos) | 
|  | { | 
|  | struct iwl_lq_sta *lq_sta = file->private_data; | 
|  | struct iwl_mvm *mvm; | 
|  | char buf[64]; | 
|  | size_t buf_size; | 
|  | u32 parsed_rate; | 
|  |  | 
|  | mvm = lq_sta->pers.drv; | 
|  | memset(buf, 0, sizeof(buf)); | 
|  | buf_size = min(count, sizeof(buf) -  1); | 
|  | if (copy_from_user(buf, user_buf, buf_size)) | 
|  | return -EFAULT; | 
|  |  | 
|  | if (sscanf(buf, "%x", &parsed_rate) == 1) | 
|  | lq_sta->pers.dbg_fixed_rate = parsed_rate; | 
|  | else | 
|  | lq_sta->pers.dbg_fixed_rate = 0; | 
|  |  | 
|  | rs_program_fix_rate(mvm, lq_sta); | 
|  |  | 
|  | return count; | 
|  | } | 
|  |  | 
|  | static ssize_t rs_sta_dbgfs_scale_table_read(struct file *file, | 
|  | char __user *user_buf, size_t count, loff_t *ppos) | 
|  | { | 
|  | char *buff; | 
|  | int desc = 0; | 
|  | int i = 0; | 
|  | ssize_t ret; | 
|  |  | 
|  | struct iwl_lq_sta *lq_sta = file->private_data; | 
|  | struct iwl_mvm_sta *mvmsta = | 
|  | container_of(lq_sta, struct iwl_mvm_sta, lq_sta); | 
|  | struct iwl_mvm *mvm; | 
|  | struct iwl_scale_tbl_info *tbl = &(lq_sta->lq_info[lq_sta->active_tbl]); | 
|  | struct rs_rate *rate = &tbl->rate; | 
|  | u32 ss_params; | 
|  |  | 
|  | mvm = lq_sta->pers.drv; | 
|  | buff = kmalloc(2048, GFP_KERNEL); | 
|  | if (!buff) | 
|  | return -ENOMEM; | 
|  |  | 
|  | desc += sprintf(buff+desc, "sta_id %d\n", lq_sta->lq.sta_id); | 
|  | desc += sprintf(buff+desc, "failed=%d success=%d rate=0%lX\n", | 
|  | lq_sta->total_failed, lq_sta->total_success, | 
|  | lq_sta->active_legacy_rate); | 
|  | desc += sprintf(buff+desc, "fixed rate 0x%X\n", | 
|  | lq_sta->pers.dbg_fixed_rate); | 
|  | desc += sprintf(buff+desc, "valid_tx_ant %s%s%s\n", | 
|  | (iwl_mvm_get_valid_tx_ant(mvm) & ANT_A) ? "ANT_A," : "", | 
|  | (iwl_mvm_get_valid_tx_ant(mvm) & ANT_B) ? "ANT_B," : "", | 
|  | (iwl_mvm_get_valid_tx_ant(mvm) & ANT_C) ? "ANT_C" : ""); | 
|  | desc += sprintf(buff+desc, "lq type %s\n", | 
|  | (is_legacy(rate)) ? "legacy" : | 
|  | is_vht(rate) ? "VHT" : "HT"); | 
|  | if (!is_legacy(rate)) { | 
|  | desc += sprintf(buff + desc, " %s", | 
|  | (is_siso(rate)) ? "SISO" : "MIMO2"); | 
|  | desc += sprintf(buff + desc, " %s", | 
|  | (is_ht20(rate)) ? "20MHz" : | 
|  | (is_ht40(rate)) ? "40MHz" : | 
|  | (is_ht80(rate)) ? "80MHz" : | 
|  | (is_ht160(rate)) ? "160MHz" : "BAD BW"); | 
|  | desc += sprintf(buff + desc, " %s %s %s %s\n", | 
|  | (rate->sgi) ? "SGI" : "NGI", | 
|  | (rate->ldpc) ? "LDPC" : "BCC", | 
|  | (lq_sta->is_agg) ? "AGG on" : "", | 
|  | (mvmsta->tlc_amsdu) ? "AMSDU on" : ""); | 
|  | } | 
|  | desc += sprintf(buff+desc, "last tx rate=0x%X\n", | 
|  | lq_sta->last_rate_n_flags); | 
|  | desc += sprintf(buff+desc, | 
|  | "general: flags=0x%X mimo-d=%d s-ant=0x%x d-ant=0x%x\n", | 
|  | lq_sta->lq.flags, | 
|  | lq_sta->lq.mimo_delim, | 
|  | lq_sta->lq.single_stream_ant_msk, | 
|  | lq_sta->lq.dual_stream_ant_msk); | 
|  |  | 
|  | desc += sprintf(buff+desc, | 
|  | "agg: time_limit=%d dist_start_th=%d frame_cnt_limit=%d\n", | 
|  | le16_to_cpu(lq_sta->lq.agg_time_limit), | 
|  | lq_sta->lq.agg_disable_start_th, | 
|  | lq_sta->lq.agg_frame_cnt_limit); | 
|  |  | 
|  | desc += sprintf(buff+desc, "reduced tpc=%d\n", lq_sta->lq.reduced_tpc); | 
|  | ss_params = le32_to_cpu(lq_sta->lq.ss_params); | 
|  | desc += sprintf(buff+desc, "single stream params: %s%s%s%s\n", | 
|  | (ss_params & LQ_SS_PARAMS_VALID) ? | 
|  | "VALID" : "INVALID", | 
|  | (ss_params & LQ_SS_BFER_ALLOWED) ? | 
|  | ", BFER" : "", | 
|  | (ss_params & LQ_SS_STBC_1SS_ALLOWED) ? | 
|  | ", STBC" : "", | 
|  | (ss_params & LQ_SS_FORCE) ? | 
|  | ", FORCE" : ""); | 
|  | desc += sprintf(buff+desc, | 
|  | "Start idx [0]=0x%x [1]=0x%x [2]=0x%x [3]=0x%x\n", | 
|  | lq_sta->lq.initial_rate_index[0], | 
|  | lq_sta->lq.initial_rate_index[1], | 
|  | lq_sta->lq.initial_rate_index[2], | 
|  | lq_sta->lq.initial_rate_index[3]); | 
|  |  | 
|  | for (i = 0; i < LINK_QUAL_MAX_RETRY_NUM; i++) { | 
|  | u32 r = le32_to_cpu(lq_sta->lq.rs_table[i]); | 
|  |  | 
|  | desc += sprintf(buff+desc, " rate[%d] 0x%X ", i, r); | 
|  | desc += rs_pretty_print_rate(buff+desc, r); | 
|  | } | 
|  |  | 
|  | ret = simple_read_from_buffer(user_buf, count, ppos, buff, desc); | 
|  | kfree(buff); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static const struct file_operations rs_sta_dbgfs_scale_table_ops = { | 
|  | .write = rs_sta_dbgfs_scale_table_write, | 
|  | .read = rs_sta_dbgfs_scale_table_read, | 
|  | .open = simple_open, | 
|  | .llseek = default_llseek, | 
|  | }; | 
|  | static ssize_t rs_sta_dbgfs_stats_table_read(struct file *file, | 
|  | char __user *user_buf, size_t count, loff_t *ppos) | 
|  | { | 
|  | char *buff; | 
|  | int desc = 0; | 
|  | int i, j; | 
|  | ssize_t ret; | 
|  | struct iwl_scale_tbl_info *tbl; | 
|  | struct rs_rate *rate; | 
|  | struct iwl_lq_sta *lq_sta = file->private_data; | 
|  |  | 
|  | buff = kmalloc(1024, GFP_KERNEL); | 
|  | if (!buff) | 
|  | return -ENOMEM; | 
|  |  | 
|  | for (i = 0; i < LQ_SIZE; i++) { | 
|  | tbl = &(lq_sta->lq_info[i]); | 
|  | rate = &tbl->rate; | 
|  | desc += sprintf(buff+desc, | 
|  | "%s type=%d SGI=%d BW=%s DUP=0\n" | 
|  | "index=%d\n", | 
|  | lq_sta->active_tbl == i ? "*" : "x", | 
|  | rate->type, | 
|  | rate->sgi, | 
|  | is_ht20(rate) ? "20MHz" : | 
|  | is_ht40(rate) ? "40MHz" : | 
|  | is_ht80(rate) ? "80MHz" : | 
|  | is_ht160(rate) ? "160MHz" : "ERR", | 
|  | rate->index); | 
|  | for (j = 0; j < IWL_RATE_COUNT; j++) { | 
|  | desc += sprintf(buff+desc, | 
|  | "counter=%d success=%d %%=%d\n", | 
|  | tbl->win[j].counter, | 
|  | tbl->win[j].success_counter, | 
|  | tbl->win[j].success_ratio); | 
|  | } | 
|  | } | 
|  | ret = simple_read_from_buffer(user_buf, count, ppos, buff, desc); | 
|  | kfree(buff); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static const struct file_operations rs_sta_dbgfs_stats_table_ops = { | 
|  | .read = rs_sta_dbgfs_stats_table_read, | 
|  | .open = simple_open, | 
|  | .llseek = default_llseek, | 
|  | }; | 
|  |  | 
|  | static ssize_t rs_sta_dbgfs_drv_tx_stats_read(struct file *file, | 
|  | char __user *user_buf, | 
|  | size_t count, loff_t *ppos) | 
|  | { | 
|  | static const char * const column_name[] = { | 
|  | [RS_COLUMN_LEGACY_ANT_A] = "LEGACY_ANT_A", | 
|  | [RS_COLUMN_LEGACY_ANT_B] = "LEGACY_ANT_B", | 
|  | [RS_COLUMN_SISO_ANT_A] = "SISO_ANT_A", | 
|  | [RS_COLUMN_SISO_ANT_B] = "SISO_ANT_B", | 
|  | [RS_COLUMN_SISO_ANT_A_SGI] = "SISO_ANT_A_SGI", | 
|  | [RS_COLUMN_SISO_ANT_B_SGI] = "SISO_ANT_B_SGI", | 
|  | [RS_COLUMN_MIMO2] = "MIMO2", | 
|  | [RS_COLUMN_MIMO2_SGI] = "MIMO2_SGI", | 
|  | }; | 
|  |  | 
|  | static const char * const rate_name[] = { | 
|  | [IWL_RATE_1M_INDEX] = "1M", | 
|  | [IWL_RATE_2M_INDEX] = "2M", | 
|  | [IWL_RATE_5M_INDEX] = "5.5M", | 
|  | [IWL_RATE_11M_INDEX] = "11M", | 
|  | [IWL_RATE_6M_INDEX] = "6M|MCS0", | 
|  | [IWL_RATE_9M_INDEX] = "9M", | 
|  | [IWL_RATE_12M_INDEX] = "12M|MCS1", | 
|  | [IWL_RATE_18M_INDEX] = "18M|MCS2", | 
|  | [IWL_RATE_24M_INDEX] = "24M|MCS3", | 
|  | [IWL_RATE_36M_INDEX] = "36M|MCS4", | 
|  | [IWL_RATE_48M_INDEX] = "48M|MCS5", | 
|  | [IWL_RATE_54M_INDEX] = "54M|MCS6", | 
|  | [IWL_RATE_MCS_7_INDEX] = "MCS7", | 
|  | [IWL_RATE_MCS_8_INDEX] = "MCS8", | 
|  | [IWL_RATE_MCS_9_INDEX] = "MCS9", | 
|  | }; | 
|  |  | 
|  | char *buff, *pos, *endpos; | 
|  | int col, rate; | 
|  | ssize_t ret; | 
|  | struct iwl_lq_sta *lq_sta = file->private_data; | 
|  | struct rs_rate_stats *stats; | 
|  | static const size_t bufsz = 1024; | 
|  |  | 
|  | buff = kmalloc(bufsz, GFP_KERNEL); | 
|  | if (!buff) | 
|  | return -ENOMEM; | 
|  |  | 
|  | pos = buff; | 
|  | endpos = pos + bufsz; | 
|  |  | 
|  | pos += scnprintf(pos, endpos - pos, "COLUMN,"); | 
|  | for (rate = 0; rate < IWL_RATE_COUNT; rate++) | 
|  | pos += scnprintf(pos, endpos - pos, "%s,", rate_name[rate]); | 
|  | pos += scnprintf(pos, endpos - pos, "\n"); | 
|  |  | 
|  | for (col = 0; col < RS_COLUMN_COUNT; col++) { | 
|  | pos += scnprintf(pos, endpos - pos, | 
|  | "%s,", column_name[col]); | 
|  |  | 
|  | for (rate = 0; rate < IWL_RATE_COUNT; rate++) { | 
|  | stats = &(lq_sta->pers.tx_stats[col][rate]); | 
|  | pos += scnprintf(pos, endpos - pos, | 
|  | "%llu/%llu,", | 
|  | stats->success, | 
|  | stats->total); | 
|  | } | 
|  | pos += scnprintf(pos, endpos - pos, "\n"); | 
|  | } | 
|  |  | 
|  | ret = simple_read_from_buffer(user_buf, count, ppos, buff, pos - buff); | 
|  | kfree(buff); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static ssize_t rs_sta_dbgfs_drv_tx_stats_write(struct file *file, | 
|  | const char __user *user_buf, | 
|  | size_t count, loff_t *ppos) | 
|  | { | 
|  | struct iwl_lq_sta *lq_sta = file->private_data; | 
|  | memset(lq_sta->pers.tx_stats, 0, sizeof(lq_sta->pers.tx_stats)); | 
|  |  | 
|  | return count; | 
|  | } | 
|  |  | 
|  | static const struct file_operations rs_sta_dbgfs_drv_tx_stats_ops = { | 
|  | .read = rs_sta_dbgfs_drv_tx_stats_read, | 
|  | .write = rs_sta_dbgfs_drv_tx_stats_write, | 
|  | .open = simple_open, | 
|  | .llseek = default_llseek, | 
|  | }; | 
|  |  | 
|  | static ssize_t iwl_dbgfs_ss_force_read(struct file *file, | 
|  | char __user *user_buf, | 
|  | size_t count, loff_t *ppos) | 
|  | { | 
|  | struct iwl_lq_sta *lq_sta = file->private_data; | 
|  | char buf[12]; | 
|  | int bufsz = sizeof(buf); | 
|  | int pos = 0; | 
|  | static const char * const ss_force_name[] = { | 
|  | [RS_SS_FORCE_NONE] = "none", | 
|  | [RS_SS_FORCE_STBC] = "stbc", | 
|  | [RS_SS_FORCE_BFER] = "bfer", | 
|  | [RS_SS_FORCE_SISO] = "siso", | 
|  | }; | 
|  |  | 
|  | pos += scnprintf(buf+pos, bufsz-pos, "%s\n", | 
|  | ss_force_name[lq_sta->pers.ss_force]); | 
|  | return simple_read_from_buffer(user_buf, count, ppos, buf, pos); | 
|  | } | 
|  |  | 
|  | static ssize_t iwl_dbgfs_ss_force_write(struct iwl_lq_sta *lq_sta, char *buf, | 
|  | size_t count, loff_t *ppos) | 
|  | { | 
|  | struct iwl_mvm *mvm = lq_sta->pers.drv; | 
|  | int ret = 0; | 
|  |  | 
|  | if (!strncmp("none", buf, 4)) { | 
|  | lq_sta->pers.ss_force = RS_SS_FORCE_NONE; | 
|  | } else if (!strncmp("siso", buf, 4)) { | 
|  | lq_sta->pers.ss_force = RS_SS_FORCE_SISO; | 
|  | } else if (!strncmp("stbc", buf, 4)) { | 
|  | if (lq_sta->stbc_capable) { | 
|  | lq_sta->pers.ss_force = RS_SS_FORCE_STBC; | 
|  | } else { | 
|  | IWL_ERR(mvm, | 
|  | "can't force STBC. peer doesn't support\n"); | 
|  | ret = -EINVAL; | 
|  | } | 
|  | } else if (!strncmp("bfer", buf, 4)) { | 
|  | if (lq_sta->bfer_capable) { | 
|  | lq_sta->pers.ss_force = RS_SS_FORCE_BFER; | 
|  | } else { | 
|  | IWL_ERR(mvm, | 
|  | "can't force BFER. peer doesn't support\n"); | 
|  | ret = -EINVAL; | 
|  | } | 
|  | } else { | 
|  | IWL_ERR(mvm, "valid values none|siso|stbc|bfer\n"); | 
|  | ret = -EINVAL; | 
|  | } | 
|  | return ret ?: count; | 
|  | } | 
|  |  | 
|  | #define MVM_DEBUGFS_READ_WRITE_FILE_OPS(name, bufsz) \ | 
|  | _MVM_DEBUGFS_READ_WRITE_FILE_OPS(name, bufsz, struct iwl_lq_sta) | 
|  | #define MVM_DEBUGFS_ADD_FILE_RS(name, parent, mode) do {		\ | 
|  | if (!debugfs_create_file(#name, mode, parent, lq_sta,	\ | 
|  | &iwl_dbgfs_##name##_ops))	\ | 
|  | goto err;					\ | 
|  | } while (0) | 
|  |  | 
|  | MVM_DEBUGFS_READ_WRITE_FILE_OPS(ss_force, 32); | 
|  |  | 
|  | static void rs_add_debugfs(void *mvm, void *priv_sta, struct dentry *dir) | 
|  | { | 
|  | struct iwl_lq_sta *lq_sta = priv_sta; | 
|  | struct iwl_mvm_sta *mvmsta; | 
|  |  | 
|  | mvmsta = container_of(lq_sta, struct iwl_mvm_sta, lq_sta); | 
|  |  | 
|  | if (!mvmsta->vif) | 
|  | return; | 
|  |  | 
|  | debugfs_create_file("rate_scale_table", S_IRUSR | S_IWUSR, dir, | 
|  | lq_sta, &rs_sta_dbgfs_scale_table_ops); | 
|  | debugfs_create_file("rate_stats_table", S_IRUSR, dir, | 
|  | lq_sta, &rs_sta_dbgfs_stats_table_ops); | 
|  | debugfs_create_file("drv_tx_stats", S_IRUSR | S_IWUSR, dir, | 
|  | lq_sta, &rs_sta_dbgfs_drv_tx_stats_ops); | 
|  | debugfs_create_u8("tx_agg_tid_enable", S_IRUSR | S_IWUSR, dir, | 
|  | &lq_sta->tx_agg_tid_en); | 
|  | debugfs_create_u8("reduced_tpc", S_IRUSR | S_IWUSR, dir, | 
|  | &lq_sta->pers.dbg_fixed_txp_reduction); | 
|  |  | 
|  | MVM_DEBUGFS_ADD_FILE_RS(ss_force, dir, S_IRUSR | S_IWUSR); | 
|  | return; | 
|  | err: | 
|  | IWL_ERR((struct iwl_mvm *)mvm, "Can't create debugfs entity\n"); | 
|  | } | 
|  |  | 
|  | static void rs_remove_debugfs(void *mvm, void *mvm_sta) | 
|  | { | 
|  | } | 
|  | #endif | 
|  |  | 
|  | /* | 
|  | * Initialization of rate scaling information is done by driver after | 
|  | * the station is added. Since mac80211 calls this function before a | 
|  | * station is added we ignore it. | 
|  | */ | 
|  | static void rs_rate_init_stub(void *mvm_r, | 
|  | struct ieee80211_supported_band *sband, | 
|  | struct cfg80211_chan_def *chandef, | 
|  | struct ieee80211_sta *sta, void *mvm_sta) | 
|  | { | 
|  | } | 
|  |  | 
|  | static const struct rate_control_ops rs_mvm_ops = { | 
|  | .name = RS_NAME, | 
|  | .tx_status = rs_mac80211_tx_status, | 
|  | .get_rate = rs_get_rate, | 
|  | .rate_init = rs_rate_init_stub, | 
|  | .alloc = rs_alloc, | 
|  | .free = rs_free, | 
|  | .alloc_sta = rs_alloc_sta, | 
|  | .free_sta = rs_free_sta, | 
|  | .rate_update = rs_rate_update, | 
|  | #ifdef CONFIG_MAC80211_DEBUGFS | 
|  | .add_sta_debugfs = rs_add_debugfs, | 
|  | .remove_sta_debugfs = rs_remove_debugfs, | 
|  | #endif | 
|  | }; | 
|  |  | 
|  | int iwl_mvm_rate_control_register(void) | 
|  | { | 
|  | return ieee80211_rate_control_register(&rs_mvm_ops); | 
|  | } | 
|  |  | 
|  | void iwl_mvm_rate_control_unregister(void) | 
|  | { | 
|  | ieee80211_rate_control_unregister(&rs_mvm_ops); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * iwl_mvm_tx_protection - Gets LQ command, change it to enable/disable | 
|  | * Tx protection, according to this request and previous requests, | 
|  | * and send the LQ command. | 
|  | * @mvmsta: The station | 
|  | * @enable: Enable Tx protection? | 
|  | */ | 
|  | int iwl_mvm_tx_protection(struct iwl_mvm *mvm, struct iwl_mvm_sta *mvmsta, | 
|  | bool enable) | 
|  | { | 
|  | struct iwl_lq_cmd *lq = &mvmsta->lq_sta.lq; | 
|  |  | 
|  | lockdep_assert_held(&mvm->mutex); | 
|  |  | 
|  | if (enable) { | 
|  | if (mvmsta->tx_protection == 0) | 
|  | lq->flags |= LQ_FLAG_USE_RTS_MSK; | 
|  | mvmsta->tx_protection++; | 
|  | } else { | 
|  | mvmsta->tx_protection--; | 
|  | if (mvmsta->tx_protection == 0) | 
|  | lq->flags &= ~LQ_FLAG_USE_RTS_MSK; | 
|  | } | 
|  |  | 
|  | return iwl_mvm_send_lq_cmd(mvm, lq, false); | 
|  | } |