|  | /******************************************************************************* | 
|  | * | 
|  | * Module Name: utownerid - Support for Table/Method Owner IDs | 
|  | * | 
|  | ******************************************************************************/ | 
|  |  | 
|  | /* | 
|  | * Copyright (C) 2000 - 2014, Intel Corp. | 
|  | * All rights reserved. | 
|  | * | 
|  | * Redistribution and use in source and binary forms, with or without | 
|  | * modification, are permitted provided that the following conditions | 
|  | * are met: | 
|  | * 1. Redistributions of source code must retain the above copyright | 
|  | *    notice, this list of conditions, and the following disclaimer, | 
|  | *    without modification. | 
|  | * 2. Redistributions in binary form must reproduce at minimum a disclaimer | 
|  | *    substantially similar to the "NO WARRANTY" disclaimer below | 
|  | *    ("Disclaimer") and any redistribution must be conditioned upon | 
|  | *    including a substantially similar Disclaimer requirement for further | 
|  | *    binary redistribution. | 
|  | * 3. Neither the names of the above-listed copyright holders nor the names | 
|  | *    of any contributors may be used to endorse or promote products derived | 
|  | *    from this software without specific prior written permission. | 
|  | * | 
|  | * Alternatively, this software may be distributed under the terms of the | 
|  | * GNU General Public License ("GPL") version 2 as published by the Free | 
|  | * Software Foundation. | 
|  | * | 
|  | * NO WARRANTY | 
|  | * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS | 
|  | * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT | 
|  | * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR | 
|  | * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT | 
|  | * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL | 
|  | * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS | 
|  | * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) | 
|  | * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, | 
|  | * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING | 
|  | * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE | 
|  | * POSSIBILITY OF SUCH DAMAGES. | 
|  | */ | 
|  |  | 
|  | #include <acpi/acpi.h> | 
|  | #include "accommon.h" | 
|  | #include "acnamesp.h" | 
|  |  | 
|  | #define _COMPONENT          ACPI_UTILITIES | 
|  | ACPI_MODULE_NAME("utownerid") | 
|  |  | 
|  | /******************************************************************************* | 
|  | * | 
|  | * FUNCTION:    acpi_ut_allocate_owner_id | 
|  | * | 
|  | * PARAMETERS:  owner_id        - Where the new owner ID is returned | 
|  | * | 
|  | * RETURN:      Status | 
|  | * | 
|  | * DESCRIPTION: Allocate a table or method owner ID. The owner ID is used to | 
|  | *              track objects created by the table or method, to be deleted | 
|  | *              when the method exits or the table is unloaded. | 
|  | * | 
|  | ******************************************************************************/ | 
|  | acpi_status acpi_ut_allocate_owner_id(acpi_owner_id * owner_id) | 
|  | { | 
|  | u32 i; | 
|  | u32 j; | 
|  | u32 k; | 
|  | acpi_status status; | 
|  |  | 
|  | ACPI_FUNCTION_TRACE(ut_allocate_owner_id); | 
|  |  | 
|  | /* Guard against multiple allocations of ID to the same location */ | 
|  |  | 
|  | if (*owner_id) { | 
|  | ACPI_ERROR((AE_INFO, "Owner ID [0x%2.2X] already exists", | 
|  | *owner_id)); | 
|  | return_ACPI_STATUS(AE_ALREADY_EXISTS); | 
|  | } | 
|  |  | 
|  | /* Mutex for the global ID mask */ | 
|  |  | 
|  | status = acpi_ut_acquire_mutex(ACPI_MTX_CACHES); | 
|  | if (ACPI_FAILURE(status)) { | 
|  | return_ACPI_STATUS(status); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Find a free owner ID, cycle through all possible IDs on repeated | 
|  | * allocations. (ACPI_NUM_OWNERID_MASKS + 1) because first index may have | 
|  | * to be scanned twice. | 
|  | */ | 
|  | for (i = 0, j = acpi_gbl_last_owner_id_index; | 
|  | i < (ACPI_NUM_OWNERID_MASKS + 1); i++, j++) { | 
|  | if (j >= ACPI_NUM_OWNERID_MASKS) { | 
|  | j = 0;	/* Wraparound to start of mask array */ | 
|  | } | 
|  |  | 
|  | for (k = acpi_gbl_next_owner_id_offset; k < 32; k++) { | 
|  | if (acpi_gbl_owner_id_mask[j] == ACPI_UINT32_MAX) { | 
|  |  | 
|  | /* There are no free IDs in this mask */ | 
|  |  | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (!(acpi_gbl_owner_id_mask[j] & (1 << k))) { | 
|  | /* | 
|  | * Found a free ID. The actual ID is the bit index plus one, | 
|  | * making zero an invalid Owner ID. Save this as the last ID | 
|  | * allocated and update the global ID mask. | 
|  | */ | 
|  | acpi_gbl_owner_id_mask[j] |= (1 << k); | 
|  |  | 
|  | acpi_gbl_last_owner_id_index = (u8)j; | 
|  | acpi_gbl_next_owner_id_offset = (u8)(k + 1); | 
|  |  | 
|  | /* | 
|  | * Construct encoded ID from the index and bit position | 
|  | * | 
|  | * Note: Last [j].k (bit 255) is never used and is marked | 
|  | * permanently allocated (prevents +1 overflow) | 
|  | */ | 
|  | *owner_id = | 
|  | (acpi_owner_id) ((k + 1) + ACPI_MUL_32(j)); | 
|  |  | 
|  | ACPI_DEBUG_PRINT((ACPI_DB_VALUES, | 
|  | "Allocated OwnerId: %2.2X\n", | 
|  | (unsigned int)*owner_id)); | 
|  | goto exit; | 
|  | } | 
|  | } | 
|  |  | 
|  | acpi_gbl_next_owner_id_offset = 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * All owner_ids have been allocated. This typically should | 
|  | * not happen since the IDs are reused after deallocation. The IDs are | 
|  | * allocated upon table load (one per table) and method execution, and | 
|  | * they are released when a table is unloaded or a method completes | 
|  | * execution. | 
|  | * | 
|  | * If this error happens, there may be very deep nesting of invoked control | 
|  | * methods, or there may be a bug where the IDs are not released. | 
|  | */ | 
|  | status = AE_OWNER_ID_LIMIT; | 
|  | ACPI_ERROR((AE_INFO, | 
|  | "Could not allocate new OwnerId (255 max), AE_OWNER_ID_LIMIT")); | 
|  |  | 
|  | exit: | 
|  | (void)acpi_ut_release_mutex(ACPI_MTX_CACHES); | 
|  | return_ACPI_STATUS(status); | 
|  | } | 
|  |  | 
|  | /******************************************************************************* | 
|  | * | 
|  | * FUNCTION:    acpi_ut_release_owner_id | 
|  | * | 
|  | * PARAMETERS:  owner_id_ptr        - Pointer to a previously allocated owner_ID | 
|  | * | 
|  | * RETURN:      None. No error is returned because we are either exiting a | 
|  | *              control method or unloading a table. Either way, we would | 
|  | *              ignore any error anyway. | 
|  | * | 
|  | * DESCRIPTION: Release a table or method owner ID. Valid IDs are 1 - 255 | 
|  | * | 
|  | ******************************************************************************/ | 
|  |  | 
|  | void acpi_ut_release_owner_id(acpi_owner_id * owner_id_ptr) | 
|  | { | 
|  | acpi_owner_id owner_id = *owner_id_ptr; | 
|  | acpi_status status; | 
|  | u32 index; | 
|  | u32 bit; | 
|  |  | 
|  | ACPI_FUNCTION_TRACE_U32(ut_release_owner_id, owner_id); | 
|  |  | 
|  | /* Always clear the input owner_id (zero is an invalid ID) */ | 
|  |  | 
|  | *owner_id_ptr = 0; | 
|  |  | 
|  | /* Zero is not a valid owner_ID */ | 
|  |  | 
|  | if (owner_id == 0) { | 
|  | ACPI_ERROR((AE_INFO, "Invalid OwnerId: 0x%2.2X", owner_id)); | 
|  | return_VOID; | 
|  | } | 
|  |  | 
|  | /* Mutex for the global ID mask */ | 
|  |  | 
|  | status = acpi_ut_acquire_mutex(ACPI_MTX_CACHES); | 
|  | if (ACPI_FAILURE(status)) { | 
|  | return_VOID; | 
|  | } | 
|  |  | 
|  | /* Normalize the ID to zero */ | 
|  |  | 
|  | owner_id--; | 
|  |  | 
|  | /* Decode ID to index/offset pair */ | 
|  |  | 
|  | index = ACPI_DIV_32(owner_id); | 
|  | bit = 1 << ACPI_MOD_32(owner_id); | 
|  |  | 
|  | /* Free the owner ID only if it is valid */ | 
|  |  | 
|  | if (acpi_gbl_owner_id_mask[index] & bit) { | 
|  | acpi_gbl_owner_id_mask[index] ^= bit; | 
|  | } else { | 
|  | ACPI_ERROR((AE_INFO, | 
|  | "Release of non-allocated OwnerId: 0x%2.2X", | 
|  | owner_id + 1)); | 
|  | } | 
|  |  | 
|  | (void)acpi_ut_release_mutex(ACPI_MTX_CACHES); | 
|  | return_VOID; | 
|  | } |