| Maxim MAX77686 multi-function device |
| |
| MAX77686 is a Multifunction device with PMIC, RTC and Charger on chip. It is |
| interfaced to host controller using i2c interface. PMIC and Charger submodules |
| are addressed using same i2c slave address whereas RTC submodule uses |
| different i2c slave address,presently for which we are statically creating i2c |
| client while probing.This document describes the binding for mfd device and |
| PMIC submodule. |
| |
| Bindings for the built-in 32k clock generator block and |
| regulators are defined in ../clk/maxim,max77686.txt and |
| ../regulator/max77686.txt respectively. |
| |
| Required properties: |
| - compatible : Must be "maxim,max77686"; |
| - reg : Specifies the i2c slave address of PMIC block. |
| - interrupts : This i2c device has an IRQ line connected to the main SoC. |
| - interrupt-parent : The parent interrupt controller. |
| |
| Example: |
| |
| max77686: pmic@9 { |
| compatible = "maxim,max77686"; |
| interrupt-parent = <&wakeup_eint>; |
| interrupts = <26 0>; |
| reg = <0x09>; |
| }; |
