| * System Management Interface (SMI) / MDIO |
| |
| Properties: |
| - compatible: One of: |
| |
| "cavium,octeon-3860-mdio": Compatibility with all cn3XXX, cn5XXX |
| and cn6XXX SOCs. |
| |
| "cavium,thunder-8890-mdio": Compatibility with all cn8XXX SOCs. |
| |
| - reg: The base address of the MDIO bus controller register bank. |
| |
| - #address-cells: Must be <1>. |
| |
| - #size-cells: Must be <0>. MDIO addresses have no size component. |
| |
| Typically an MDIO bus might have several children. |
| |
| Example: |
| mdio@1180000001800 { |
| compatible = "cavium,octeon-3860-mdio"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x11800 0x00001800 0x0 0x40>; |
| |
| ethernet-phy@0 { |
| ... |
| reg = <0>; |
| }; |
| }; |
| |
| |
| * System Management Interface (SMI) / MDIO Nexus |
| |
| Several mdio buses may be gathered as children of a single PCI |
| device, this PCI device is the nexus of the buses. |
| |
| Properties: |
| |
| - compatible: "cavium,thunder-8890-mdio-nexus"; |
| |
| - reg: The PCI device and function numbers of the nexus device. |
| |
| - #address-cells: Must be <2>. |
| |
| - #size-cells: Must be <2>. |
| |
| - ranges: As needed for mapping of the MDIO bus device registers. |
| |
| - assigned-addresses: As needed for mapping of the MDIO bus device registers. |
| |
| Example: |
| |
| mdio-nexus@1,3 { |
| compatible = "cavium,thunder-8890-mdio-nexus"; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| reg = <0x0b00 0 0 0 0>; /* DEVFN = 0x0b (1:3) */ |
| assigned-addresses = <0x03000000 0x87e0 0x05000000 0x0 0x800000>; |
| ranges = <0x87e0 0x05000000 0x03000000 0x87e0 0x05000000 0x0 0x800000>; |
| |
| mdio0@87e0,05003800 { |
| compatible = "cavium,thunder-8890-mdio"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x87e0 0x05003800 0x0 0x30>; |
| |
| ethernet-phy@0 { |
| ... |
| reg = <0>; |
| }; |
| }; |
| mdio0@87e0,05003880 { |
| compatible = "cavium,thunder-8890-mdio"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x87e0 0x05003880 0x0 0x30>; |
| |
| ethernet-phy@0 { |
| ... |
| reg = <0>; |
| }; |
| }; |
| }; |