| Imagination Technologies SPDIF Input Controller |
| |
| Required Properties: |
| |
| - compatible : Compatible list, must contain "img,spdif-in" |
| |
| - #sound-dai-cells : Must be equal to 0 |
| |
| - reg : Offset and length of the register set for the device |
| |
| - dmas: Contains an entry for each entry in dma-names. |
| |
| - dma-names: Must include the following entry: |
| "rx" |
| |
| - clocks : Contains an entry for each entry in clock-names |
| |
| - clock-names : Includes the following entries: |
| "sys" The system clock |
| |
| Optional Properties: |
| |
| - resets: Should contain a phandle to the spdif in reset signal, if any |
| |
| - reset-names: Should contain the reset signal name "rst", if a |
| reset phandle is given |
| |
| - interrupts : Contains the spdif in interrupt, if present |
| |
| Example: |
| |
| spdif_in: spdif-in@18100E00 { |
| compatible = "img,spdif-in"; |
| reg = <0x18100E00 0x100>; |
| interrupts = <GIC_SHARED 20 IRQ_TYPE_LEVEL_HIGH>; |
| dmas = <&mdc 15 0xffffffff 0>; |
| dma-names = "rx"; |
| clocks = <&cr_periph SYS_CLK_SPDIF_IN>; |
| clock-names = "sys"; |
| #sound-dai-cells = <0>; |
| }; |
