| # |
| # Broadcom device configuration |
| # |
| |
| config NET_VENDOR_BROADCOM |
| bool "Broadcom devices" |
| default y |
| depends on (SSB_POSSIBLE && HAS_DMA) || PCI || BCM63XX || \ |
| SIBYTE_SB1xxx_SOC |
| ---help--- |
| If you have a network (Ethernet) chipset belonging to this class, |
| say Y. |
| |
| Note that the answer to this question does not directly affect |
| the kernel: saying N will just case the configurator to skip all |
| the questions regarding AMD chipsets. If you say Y, you will be asked |
| for your specific chipset/driver in the following questions. |
| |
| if NET_VENDOR_BROADCOM |
| |
| config B44 |
| tristate "Broadcom 440x/47xx ethernet support" |
| depends on SSB_POSSIBLE && HAS_DMA |
| select SSB |
| select MII |
| select PHYLIB |
| ---help--- |
| If you have a network (Ethernet) controller of this type, say Y |
| or M here. |
| |
| To compile this driver as a module, choose M here. The module |
| will be called b44. |
| |
| # Auto-select SSB PCI-HOST support, if possible |
| config B44_PCI_AUTOSELECT |
| bool |
| depends on B44 && SSB_PCIHOST_POSSIBLE |
| select SSB_PCIHOST |
| default y |
| |
| # Auto-select SSB PCICORE driver, if possible |
| config B44_PCICORE_AUTOSELECT |
| bool |
| depends on B44 && SSB_DRIVER_PCICORE_POSSIBLE |
| select SSB_DRIVER_PCICORE |
| default y |
| |
| config B44_PCI |
| bool |
| depends on B44_PCI_AUTOSELECT && B44_PCICORE_AUTOSELECT |
| default y |
| |
| config BCM63XX_ENET |
| tristate "Broadcom 63xx internal mac support" |
| depends on BCM63XX |
| select MII |
| select PHYLIB |
| help |
| This driver supports the ethernet MACs in the Broadcom 63xx |
| MIPS chipset family (BCM63XX). |
| |
| config BCMGENET |
| tristate "Broadcom GENET internal MAC support" |
| depends on OF && HAS_IOMEM |
| select MII |
| select PHYLIB |
| select FIXED_PHY |
| select BCM7XXX_PHY |
| select MDIO_BCM_UNIMAC |
| help |
| This driver supports the built-in Ethernet MACs found in the |
| Broadcom BCM7xxx Set Top Box family chipset. |
| |
| config BNX2 |
| tristate "QLogic bnx2 support" |
| depends on PCI |
| select CRC32 |
| select FW_LOADER |
| ---help--- |
| This driver supports QLogic bnx2 gigabit Ethernet cards. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called bnx2. This is recommended. |
| |
| config CNIC |
| tristate "QLogic CNIC support" |
| depends on PCI && (IPV6 || IPV6=n) |
| select BNX2 |
| select UIO |
| ---help--- |
| This driver supports offload features of QLogic bnx2 gigabit |
| Ethernet cards. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called cnic. This is recommended. |
| |
| config SB1250_MAC |
| tristate "SB1250 Gigabit Ethernet support" |
| depends on SIBYTE_SB1xxx_SOC |
| select PHYLIB |
| ---help--- |
| This driver supports Gigabit Ethernet interfaces based on the |
| Broadcom SiByte family of System-On-a-Chip parts. They include |
| the BCM1120, BCM1125, BCM1125H, BCM1250, BCM1255, BCM1280, BCM1455 |
| and BCM1480 chips. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called sb1250-mac. |
| |
| config TIGON3 |
| tristate "Broadcom Tigon3 support" |
| depends on PCI |
| select PHYLIB |
| imply PTP_1588_CLOCK |
| ---help--- |
| This driver supports Broadcom Tigon3 based gigabit Ethernet cards. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called tg3. This is recommended. |
| |
| config TIGON3_HWMON |
| bool "Broadcom Tigon3 HWMON support" |
| default y |
| depends on TIGON3 && HWMON && !(TIGON3=y && HWMON=m) |
| ---help--- |
| Say Y if you want to expose the thermal sensor on Tigon3 devices. |
| |
| config BNX2X |
| tristate "Broadcom NetXtremeII 10Gb support" |
| depends on PCI |
| imply PTP_1588_CLOCK |
| select FW_LOADER |
| select ZLIB_INFLATE |
| select LIBCRC32C |
| select MDIO |
| ---help--- |
| This driver supports Broadcom NetXtremeII 10 gigabit Ethernet cards. |
| To compile this driver as a module, choose M here: the module |
| will be called bnx2x. This is recommended. |
| |
| config BNX2X_SRIOV |
| bool "Broadcom 578xx and 57712 SR-IOV support" |
| depends on BNX2X && PCI_IOV |
| default y |
| ---help--- |
| This configuration parameter enables Single Root Input Output |
| Virtualization support in the 578xx and 57712 products. This |
| allows for virtual function acceleration in virtual environments. |
| |
| config BGMAC |
| tristate |
| help |
| This enables the integrated ethernet controller support for many |
| Broadcom (mostly iProc) SoCs. An appropriate bus interface driver |
| needs to be enabled to select this. |
| |
| config BGMAC_BCMA |
| tristate "Broadcom iProc GBit BCMA support" |
| depends on BCMA && BCMA_HOST_SOC |
| depends on HAS_DMA |
| depends on BCM47XX || ARCH_BCM_5301X || COMPILE_TEST |
| select BGMAC |
| select PHYLIB |
| select FIXED_PHY |
| ---help--- |
| This driver supports GBit MAC and BCM4706 GBit MAC cores on BCMA bus. |
| They can be found on BCM47xx SoCs and provide gigabit ethernet. |
| In case of using this driver on BCM4706 it's also requires to enable |
| BCMA_DRIVER_GMAC_CMN to make it work. |
| |
| config BGMAC_PLATFORM |
| tristate "Broadcom iProc GBit platform support" |
| depends on HAS_DMA |
| depends on ARCH_BCM_IPROC || COMPILE_TEST |
| depends on OF |
| select BGMAC |
| select PHYLIB |
| select FIXED_PHY |
| default ARCH_BCM_IPROC |
| ---help--- |
| Say Y here if you want to use the Broadcom iProc Gigabit Ethernet |
| controller through the generic platform interface |
| |
| config SYSTEMPORT |
| tristate "Broadcom SYSTEMPORT internal MAC support" |
| depends on OF |
| depends on NET_DSA || !NET_DSA |
| select MII |
| select PHYLIB |
| select FIXED_PHY |
| help |
| This driver supports the built-in Ethernet MACs found in the |
| Broadcom BCM7xxx Set Top Box family chipset using an internal |
| Ethernet switch. |
| |
| config BNXT |
| tristate "Broadcom NetXtreme-C/E support" |
| depends on PCI |
| depends on MAY_USE_DEVLINK |
| select FW_LOADER |
| select LIBCRC32C |
| ---help--- |
| This driver supports Broadcom NetXtreme-C/E 10/25/40/50 gigabit |
| Ethernet cards. To compile this driver as a module, choose M here: |
| the module will be called bnxt_en. This is recommended. |
| |
| config BNXT_SRIOV |
| bool "Broadcom NetXtreme-C/E SR-IOV support" |
| depends on BNXT && PCI_IOV |
| default y |
| ---help--- |
| This configuration parameter enables Single Root Input Output |
| Virtualization support in the NetXtreme-C/E products. This |
| allows for virtual function acceleration in virtual environments. |
| |
| config BNXT_FLOWER_OFFLOAD |
| bool "TC Flower offload support for NetXtreme-C/E" |
| depends on BNXT |
| default y |
| ---help--- |
| This configuration parameter enables TC Flower packet classifier |
| offload for eswitch. This option enables SR-IOV switchdev eswitch |
| offload. |
| |
| config BNXT_DCB |
| bool "Data Center Bridging (DCB) Support" |
| default n |
| depends on BNXT && DCB |
| ---help--- |
| Say Y here if you want to use Data Center Bridging (DCB) in the |
| driver. |
| |
| If unsure, say N. |
| |
| endif # NET_VENDOR_BROADCOM |
