drivers/net/wan/lmc/lmc_ioctl.h - arm/linux - Git at Google

 #ifndef _LMC_IOCTL_H_
 #define _LMC_IOCTL_H_
 /*	$Id: lmc_ioctl.h,v 1.15 2000/04/06 12:16:43 asj Exp $	*/

  /*
   * Copyright (c) 1997-2000 LAN Media Corporation (LMC)
   * All rights reserved.  www.lanmedia.com
   *
   * This code is written by:
   * Andrew Stanley-Jones (asj@cban.com)
   * Rob Braun (bbraun@vix.com),
   * Michael Graff (explorer@vix.com) and
   * Matt Thomas (matt@3am-software.com).
   *
   * This software may be used and distributed according to the terms
   * of the GNU General Public License version 2, incorporated herein by reference.
   */

 #define LMCIOCGINFO             SIOCDEVPRIVATE+3 /* get current state */
 #define LMCIOCSINFO             SIOCDEVPRIVATE+4 /* set state to user values */
 #define LMCIOCGETLMCSTATS       SIOCDEVPRIVATE+5
 #define LMCIOCCLEARLMCSTATS     SIOCDEVPRIVATE+6
 #define LMCIOCDUMPEVENTLOG      SIOCDEVPRIVATE+7
 #define LMCIOCGETXINFO          SIOCDEVPRIVATE+8
 #define LMCIOCSETCIRCUIT        SIOCDEVPRIVATE+9
 #define LMCIOCUNUSEDATM         SIOCDEVPRIVATE+10
 #define LMCIOCRESET             SIOCDEVPRIVATE+11
 #define LMCIOCT1CONTROL         SIOCDEVPRIVATE+12
 #define LMCIOCIFTYPE            SIOCDEVPRIVATE+13
 #define LMCIOCXILINX            SIOCDEVPRIVATE+14

 #define LMC_CARDTYPE_UNKNOWN            -1
 #define LMC_CARDTYPE_HSSI               1       /* probed card is a HSSI card */
 #define LMC_CARDTYPE_DS3                2       /* probed card is a DS3 card */
 #define LMC_CARDTYPE_SSI                3       /* probed card is a SSI card */
 #define LMC_CARDTYPE_T1                 4       /* probed card is a T1 card */

 #define LMC_CTL_CARDTYPE_LMC5200	0	/* HSSI */
 #define LMC_CTL_CARDTYPE_LMC5245	1	/* DS3 */
 #define LMC_CTL_CARDTYPE_LMC1000	2	/* SSI, V.35 */
 #define LMC_CTL_CARDTYPE_LMC1200        3       /* DS1 */

 #define LMC_CTL_OFF			0	/* generic OFF value */
 #define LMC_CTL_ON			1	/* generic ON value */

 #define LMC_CTL_CLOCK_SOURCE_EXT	0	/* clock off line */
 #define LMC_CTL_CLOCK_SOURCE_INT	1	/* internal clock */

 #define LMC_CTL_CRC_LENGTH_16		16
 #define LMC_CTL_CRC_LENGTH_32		32
 #define LMC_CTL_CRC_BYTESIZE_2          2
 #define LMC_CTL_CRC_BYTESIZE_4          4


 #define LMC_CTL_CABLE_LENGTH_LT_100FT	0	/* DS3 cable < 100 feet */
 #define LMC_CTL_CABLE_LENGTH_GT_100FT	1	/* DS3 cable >= 100 feet */

 #define LMC_CTL_CIRCUIT_TYPE_E1 0
 #define LMC_CTL_CIRCUIT_TYPE_T1 1

 /*
  * IFTYPE defines
  */
 #define LMC_PPP         1               /* use generic HDLC interface */
 #define LMC_NET         2               /* use direct net interface */
 #define LMC_RAW         3               /* use direct net interface */

 /*
  * These are not in the least IOCTL related, but I want them common.
  */
 /*
  * assignments for the GPIO register on the DEC chip (common)
  */
 #define LMC_GEP_INIT		0x01 /* 0: */
 #define LMC_GEP_RESET		0x02 /* 1: */
 #define LMC_GEP_MODE		0x10 /* 4: */
 #define LMC_GEP_DP		0x20 /* 5: */
 #define LMC_GEP_DATA		0x40 /* 6: serial out */
 #define LMC_GEP_CLK	        0x80 /* 7: serial clock */

 /*
  * HSSI GPIO assignments
  */
 #define LMC_GEP_HSSI_ST		0x04 /* 2: receive timing sense (deprecated) */
 #define LMC_GEP_HSSI_CLOCK	0x08 /* 3: clock source */

 /*
  * T1 GPIO assignments
  */
 #define LMC_GEP_SSI_GENERATOR	0x04 /* 2: enable prog freq gen serial i/f */
 #define LMC_GEP_SSI_TXCLOCK	0x08 /* 3: provide clock on TXCLOCK output */

 /*
  * Common MII16 bits
  */
 #define LMC_MII16_LED0         0x0080
 #define LMC_MII16_LED1         0x0100
 #define LMC_MII16_LED2         0x0200
 #define LMC_MII16_LED3         0x0400  /* Error, and the red one */
 #define LMC_MII16_LED_ALL      0x0780  /* LED bit mask */
 #define LMC_MII16_FIFO_RESET   0x0800

 /*
  * definitions for HSSI
  */
 #define LMC_MII16_HSSI_TA      0x0001
 #define LMC_MII16_HSSI_CA      0x0002
 #define LMC_MII16_HSSI_LA      0x0004
 #define LMC_MII16_HSSI_LB      0x0008
 #define LMC_MII16_HSSI_LC      0x0010
 #define LMC_MII16_HSSI_TM      0x0020
 #define LMC_MII16_HSSI_CRC     0x0040

 /*
  * assignments for the MII register 16 (DS3)
  */
 #define LMC_MII16_DS3_ZERO	0x0001
 #define LMC_MII16_DS3_TRLBK	0x0002
 #define LMC_MII16_DS3_LNLBK	0x0004
 #define LMC_MII16_DS3_RAIS	0x0008
 #define LMC_MII16_DS3_TAIS	0x0010
 #define LMC_MII16_DS3_BIST	0x0020
 #define LMC_MII16_DS3_DLOS	0x0040
 #define LMC_MII16_DS3_CRC	0x1000
 #define LMC_MII16_DS3_SCRAM	0x2000
 #define LMC_MII16_DS3_SCRAM_LARS 0x4000

 /* Note: 2 pairs of LEDs where swapped by mistake
  * in Xilinx code for DS3 & DS1 adapters */
 #define LMC_DS3_LED0    0x0100          /* bit 08  yellow */
 #define LMC_DS3_LED1    0x0080          /* bit 07  blue   */
 #define LMC_DS3_LED2    0x0400          /* bit 10  green  */
 #define LMC_DS3_LED3    0x0200          /* bit 09  red    */

 /*
  * framer register 0 and 7 (7 is latched and reset on read)
  */
 #define LMC_FRAMER_REG0_DLOS            0x80    /* digital loss of service */
 #define LMC_FRAMER_REG0_OOFS            0x40    /* out of frame sync */
 #define LMC_FRAMER_REG0_AIS             0x20    /* alarm indication signal */
 #define LMC_FRAMER_REG0_CIS             0x10    /* channel idle */
 #define LMC_FRAMER_REG0_LOC             0x08    /* loss of clock */

 /*
  * Framer register 9 contains the blue alarm signal
  */
 #define LMC_FRAMER_REG9_RBLUE          0x02     /* Blue alarm failure */

 /*
  * Framer register 0x10 contains xbit error
  */
 #define LMC_FRAMER_REG10_XBIT          0x01     /* X bit error alarm failure */

 /*
  * And SSI, LMC1000
  */
 #define LMC_MII16_SSI_DTR	0x0001	/* DTR output RW */
 #define LMC_MII16_SSI_DSR	0x0002	/* DSR input RO */
 #define LMC_MII16_SSI_RTS	0x0004	/* RTS output RW */
 #define LMC_MII16_SSI_CTS	0x0008	/* CTS input RO */
 #define LMC_MII16_SSI_DCD	0x0010	/* DCD input RO */
 #define LMC_MII16_SSI_RI		0x0020	/* RI input RO */
 #define LMC_MII16_SSI_CRC                0x1000  /* CRC select - RW */

 /*
  * bits 0x0080 through 0x0800 are generic, and described
  * above with LMC_MII16_LED[0123] _LED_ALL, and _FIFO_RESET
  */
 #define LMC_MII16_SSI_LL		0x1000	/* LL output RW */
 #define LMC_MII16_SSI_RL		0x2000	/* RL output RW */
 #define LMC_MII16_SSI_TM		0x4000	/* TM input RO */
 #define LMC_MII16_SSI_LOOP	0x8000	/* loopback enable RW */

 /*
  * Some of the MII16 bits are mirrored in the MII17 register as well,
  * but let's keep thing separate for now, and get only the cable from
  * the MII17.
  */
 #define LMC_MII17_SSI_CABLE_MASK	0x0038	/* mask to extract the cable type */
 #define LMC_MII17_SSI_CABLE_SHIFT 3	/* shift to extract the cable type */

 /*
  * And T1, LMC1200
  */
 #define LMC_MII16_T1_UNUSED1    0x0003
 #define LMC_MII16_T1_XOE                0x0004
 #define LMC_MII16_T1_RST                0x0008  /* T1 chip reset - RW */
 #define LMC_MII16_T1_Z                  0x0010  /* output impedance T1=1, E1=0 output - RW */
 #define LMC_MII16_T1_INTR               0x0020  /* interrupt from 8370 - RO */
 #define LMC_MII16_T1_ONESEC             0x0040  /* one second square wave - ro */

 #define LMC_MII16_T1_LED0               0x0100
 #define LMC_MII16_T1_LED1               0x0080
 #define LMC_MII16_T1_LED2               0x0400
 #define LMC_MII16_T1_LED3               0x0200
 #define LMC_MII16_T1_FIFO_RESET 0x0800

 #define LMC_MII16_T1_CRC                0x1000  /* CRC select - RW */
 #define LMC_MII16_T1_UNUSED2    0xe000


 /* 8370 framer registers  */

 #define T1FRAMER_ALARM1_STATUS  0x47
 #define T1FRAMER_ALARM2_STATUS  0x48
 #define T1FRAMER_FERR_LSB               0x50
 #define T1FRAMER_FERR_MSB               0x51    /* framing bit error counter */
 #define T1FRAMER_LCV_LSB                0x54
 #define T1FRAMER_LCV_MSB                0x55    /* line code violation counter */
 #define T1FRAMER_AERR                   0x5A

 /* mask for the above AERR register */
 #define T1FRAMER_LOF_MASK               (0x0f0) /* receive loss of frame */
 #define T1FRAMER_COFA_MASK              (0x0c0) /* change of frame alignment */
 #define T1FRAMER_SEF_MASK               (0x03)  /* severely errored frame  */

 /* 8370 framer register ALM1 (0x47) values
  * used to determine link status
  */

 #define T1F_SIGFRZ      0x01    /* signaling freeze */
 #define T1F_RLOF        0x02    /* receive loss of frame alignment */
 #define T1F_RLOS        0x04    /* receive loss of signal */
 #define T1F_RALOS       0x08    /* receive analog loss of signal or RCKI loss of clock */
 #define T1F_RAIS        0x10    /* receive alarm indication signal */
 #define T1F_UNUSED      0x20
 #define T1F_RYEL        0x40    /* receive yellow alarm */
 #define T1F_RMYEL       0x80    /* receive multiframe yellow alarm */

 #define LMC_T1F_WRITE       0
 #define LMC_T1F_READ        1

 typedef struct lmc_st1f_control {
   int command;
   int address;
   int value;
   char __user *data;
 } lmc_t1f_control;

 enum lmc_xilinx_c {
     lmc_xilinx_reset = 1,
     lmc_xilinx_load_prom = 2,
     lmc_xilinx_load = 3
 };

 struct lmc_xilinx_control {
     enum lmc_xilinx_c command;
     int len;
     char __user *data;
 };

 /* ------------------ end T1 defs ------------------- */

 #define LMC_MII_LedMask                 0x0780
 #define LMC_MII_LedBitPos               7

 #endif
	#ifndef _LMC_IOCTL_H_
	#define _LMC_IOCTL_H_
	/* $Id: lmc_ioctl.h,v 1.15 2000/04/06 12:16:43 asj Exp $ */

	/*
	* Copyright (c) 1997-2000 LAN Media Corporation (LMC)
	* All rights reserved. www.lanmedia.com
	*
	* This code is written by:
	* Andrew Stanley-Jones (asj@cban.com)
	* Rob Braun (bbraun@vix.com),
	* Michael Graff (explorer@vix.com) and
	* Matt Thomas (matt@3am-software.com).
	*
	* This software may be used and distributed according to the terms
	* of the GNU General Public License version 2, incorporated herein by reference.
	*/

	#define LMCIOCGINFO SIOCDEVPRIVATE+3 /* get current state */
	#define LMCIOCSINFO SIOCDEVPRIVATE+4 /* set state to user values */
	#define LMCIOCGETLMCSTATS SIOCDEVPRIVATE+5
	#define LMCIOCCLEARLMCSTATS SIOCDEVPRIVATE+6
	#define LMCIOCDUMPEVENTLOG SIOCDEVPRIVATE+7
	#define LMCIOCGETXINFO SIOCDEVPRIVATE+8
	#define LMCIOCSETCIRCUIT SIOCDEVPRIVATE+9
	#define LMCIOCUNUSEDATM SIOCDEVPRIVATE+10
	#define LMCIOCRESET SIOCDEVPRIVATE+11
	#define LMCIOCT1CONTROL SIOCDEVPRIVATE+12
	#define LMCIOCIFTYPE SIOCDEVPRIVATE+13
	#define LMCIOCXILINX SIOCDEVPRIVATE+14

	#define LMC_CARDTYPE_UNKNOWN -1
	#define LMC_CARDTYPE_HSSI 1 /* probed card is a HSSI card */
	#define LMC_CARDTYPE_DS3 2 /* probed card is a DS3 card */
	#define LMC_CARDTYPE_SSI 3 /* probed card is a SSI card */
	#define LMC_CARDTYPE_T1 4 /* probed card is a T1 card */

	#define LMC_CTL_CARDTYPE_LMC5200 0 /* HSSI */
	#define LMC_CTL_CARDTYPE_LMC5245 1 /* DS3 */
	#define LMC_CTL_CARDTYPE_LMC1000 2 /* SSI, V.35 */
	#define LMC_CTL_CARDTYPE_LMC1200 3 /* DS1 */

	#define LMC_CTL_OFF 0 /* generic OFF value */
	#define LMC_CTL_ON 1 /* generic ON value */

	#define LMC_CTL_CLOCK_SOURCE_EXT 0 /* clock off line */
	#define LMC_CTL_CLOCK_SOURCE_INT 1 /* internal clock */

	#define LMC_CTL_CRC_LENGTH_16 16
	#define LMC_CTL_CRC_LENGTH_32 32
	#define LMC_CTL_CRC_BYTESIZE_2 2
	#define LMC_CTL_CRC_BYTESIZE_4 4


	#define LMC_CTL_CABLE_LENGTH_LT_100FT 0 /* DS3 cable < 100 feet */
	#define LMC_CTL_CABLE_LENGTH_GT_100FT 1 /* DS3 cable >= 100 feet */

	#define LMC_CTL_CIRCUIT_TYPE_E1 0
	#define LMC_CTL_CIRCUIT_TYPE_T1 1

	/*
	* IFTYPE defines
	*/
	#define LMC_PPP 1 /* use generic HDLC interface */
	#define LMC_NET 2 /* use direct net interface */
	#define LMC_RAW 3 /* use direct net interface */

	/*
	* These are not in the least IOCTL related, but I want them common.
	*/
	/*
	* assignments for the GPIO register on the DEC chip (common)
	*/
	#define LMC_GEP_INIT 0x01 /* 0: */
	#define LMC_GEP_RESET 0x02 /* 1: */
	#define LMC_GEP_MODE 0x10 /* 4: */
	#define LMC_GEP_DP 0x20 /* 5: */
	#define LMC_GEP_DATA 0x40 /* 6: serial out */
	#define LMC_GEP_CLK 0x80 /* 7: serial clock */

	/*
	* HSSI GPIO assignments
	*/
	#define LMC_GEP_HSSI_ST 0x04 /* 2: receive timing sense (deprecated) */
	#define LMC_GEP_HSSI_CLOCK 0x08 /* 3: clock source */

	/*
	* T1 GPIO assignments
	*/
	#define LMC_GEP_SSI_GENERATOR 0x04 /* 2: enable prog freq gen serial i/f */
	#define LMC_GEP_SSI_TXCLOCK 0x08 /* 3: provide clock on TXCLOCK output */

	/*
	* Common MII16 bits
	*/
	#define LMC_MII16_LED0 0x0080
	#define LMC_MII16_LED1 0x0100
	#define LMC_MII16_LED2 0x0200
	#define LMC_MII16_LED3 0x0400 /* Error, and the red one */
	#define LMC_MII16_LED_ALL 0x0780 /* LED bit mask */
	#define LMC_MII16_FIFO_RESET 0x0800

	/*
	* definitions for HSSI
	*/
	#define LMC_MII16_HSSI_TA 0x0001
	#define LMC_MII16_HSSI_CA 0x0002
	#define LMC_MII16_HSSI_LA 0x0004
	#define LMC_MII16_HSSI_LB 0x0008
	#define LMC_MII16_HSSI_LC 0x0010
	#define LMC_MII16_HSSI_TM 0x0020
	#define LMC_MII16_HSSI_CRC 0x0040

	/*
	* assignments for the MII register 16 (DS3)
	*/
	#define LMC_MII16_DS3_ZERO 0x0001
	#define LMC_MII16_DS3_TRLBK 0x0002
	#define LMC_MII16_DS3_LNLBK 0x0004
	#define LMC_MII16_DS3_RAIS 0x0008
	#define LMC_MII16_DS3_TAIS 0x0010
	#define LMC_MII16_DS3_BIST 0x0020
	#define LMC_MII16_DS3_DLOS 0x0040
	#define LMC_MII16_DS3_CRC 0x1000
	#define LMC_MII16_DS3_SCRAM 0x2000
	#define LMC_MII16_DS3_SCRAM_LARS 0x4000

	/* Note: 2 pairs of LEDs where swapped by mistake
	* in Xilinx code for DS3 & DS1 adapters */
	#define LMC_DS3_LED0 0x0100 /* bit 08 yellow */
	#define LMC_DS3_LED1 0x0080 /* bit 07 blue */
	#define LMC_DS3_LED2 0x0400 /* bit 10 green */
	#define LMC_DS3_LED3 0x0200 /* bit 09 red */

	/*
	* framer register 0 and 7 (7 is latched and reset on read)
	*/
	#define LMC_FRAMER_REG0_DLOS 0x80 /* digital loss of service */
	#define LMC_FRAMER_REG0_OOFS 0x40 /* out of frame sync */
	#define LMC_FRAMER_REG0_AIS 0x20 /* alarm indication signal */
	#define LMC_FRAMER_REG0_CIS 0x10 /* channel idle */
	#define LMC_FRAMER_REG0_LOC 0x08 /* loss of clock */

	/*
	* Framer register 9 contains the blue alarm signal
	*/
	#define LMC_FRAMER_REG9_RBLUE 0x02 /* Blue alarm failure */

	/*
	* Framer register 0x10 contains xbit error
	*/
	#define LMC_FRAMER_REG10_XBIT 0x01 /* X bit error alarm failure */

	/*
	* And SSI, LMC1000
	*/
	#define LMC_MII16_SSI_DTR 0x0001 /* DTR output RW */
	#define LMC_MII16_SSI_DSR 0x0002 /* DSR input RO */
	#define LMC_MII16_SSI_RTS 0x0004 /* RTS output RW */
	#define LMC_MII16_SSI_CTS 0x0008 /* CTS input RO */
	#define LMC_MII16_SSI_DCD 0x0010 /* DCD input RO */
	#define LMC_MII16_SSI_RI 0x0020 /* RI input RO */
	#define LMC_MII16_SSI_CRC 0x1000 /* CRC select - RW */

	/*
	* bits 0x0080 through 0x0800 are generic, and described
	* above with LMC_MII16_LED[0123] _LED_ALL, and _FIFO_RESET
	*/
	#define LMC_MII16_SSI_LL 0x1000 /* LL output RW */
	#define LMC_MII16_SSI_RL 0x2000 /* RL output RW */
	#define LMC_MII16_SSI_TM 0x4000 /* TM input RO */
	#define LMC_MII16_SSI_LOOP 0x8000 /* loopback enable RW */

	/*
	* Some of the MII16 bits are mirrored in the MII17 register as well,
	* but let's keep thing separate for now, and get only the cable from
	* the MII17.
	*/
	#define LMC_MII17_SSI_CABLE_MASK 0x0038 /* mask to extract the cable type */
	#define LMC_MII17_SSI_CABLE_SHIFT 3 /* shift to extract the cable type */

	/*
	* And T1, LMC1200
	*/
	#define LMC_MII16_T1_UNUSED1 0x0003
	#define LMC_MII16_T1_XOE 0x0004
	#define LMC_MII16_T1_RST 0x0008 /* T1 chip reset - RW */
	#define LMC_MII16_T1_Z 0x0010 /* output impedance T1=1, E1=0 output - RW */
	#define LMC_MII16_T1_INTR 0x0020 /* interrupt from 8370 - RO */
	#define LMC_MII16_T1_ONESEC 0x0040 /* one second square wave - ro */

	#define LMC_MII16_T1_LED0 0x0100
	#define LMC_MII16_T1_LED1 0x0080
	#define LMC_MII16_T1_LED2 0x0400
	#define LMC_MII16_T1_LED3 0x0200
	#define LMC_MII16_T1_FIFO_RESET 0x0800

	#define LMC_MII16_T1_CRC 0x1000 /* CRC select - RW */
	#define LMC_MII16_T1_UNUSED2 0xe000


	/* 8370 framer registers */

	#define T1FRAMER_ALARM1_STATUS 0x47
	#define T1FRAMER_ALARM2_STATUS 0x48
	#define T1FRAMER_FERR_LSB 0x50
	#define T1FRAMER_FERR_MSB 0x51 /* framing bit error counter */
	#define T1FRAMER_LCV_LSB 0x54
	#define T1FRAMER_LCV_MSB 0x55 /* line code violation counter */
	#define T1FRAMER_AERR 0x5A

	/* mask for the above AERR register */
	#define T1FRAMER_LOF_MASK (0x0f0) /* receive loss of frame */
	#define T1FRAMER_COFA_MASK (0x0c0) /* change of frame alignment */
	#define T1FRAMER_SEF_MASK (0x03) /* severely errored frame */

	/* 8370 framer register ALM1 (0x47) values
	* used to determine link status
	*/

	#define T1F_SIGFRZ 0x01 /* signaling freeze */
	#define T1F_RLOF 0x02 /* receive loss of frame alignment */
	#define T1F_RLOS 0x04 /* receive loss of signal */
	#define T1F_RALOS 0x08 /* receive analog loss of signal or RCKI loss of clock */
	#define T1F_RAIS 0x10 /* receive alarm indication signal */
	#define T1F_UNUSED 0x20
	#define T1F_RYEL 0x40 /* receive yellow alarm */
	#define T1F_RMYEL 0x80 /* receive multiframe yellow alarm */

	#define LMC_T1F_WRITE 0
	#define LMC_T1F_READ 1

	typedef struct lmc_st1f_control {
	int command;
	int address;
	int value;
	char __user *data;
	} lmc_t1f_control;

	enum lmc_xilinx_c {
	lmc_xilinx_reset = 1,
	lmc_xilinx_load_prom = 2,
	lmc_xilinx_load = 3
	};

	struct lmc_xilinx_control {
	enum lmc_xilinx_c command;
	int len;
	char __user *data;
	};

	/* ------------------ end T1 defs ------------------- */

	#define LMC_MII_LedMask 0x0780
	#define LMC_MII_LedBitPos 7

	#endif