| /* | |
| * fs/cifs/smb2misc.c | |
| * | |
| * Copyright (C) International Business Machines Corp., 2002,2011 | |
| * Etersoft, 2012 | |
| * Author(s): Steve French (sfrench@us.ibm.com) | |
| * Pavel Shilovsky (pshilovsky@samba.org) 2012 | |
| * | |
| * This library is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU Lesser General Public License as published | |
| * by the Free Software Foundation; either version 2.1 of the License, or | |
| * (at your option) any later version. | |
| * | |
| * This library is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See | |
| * the GNU Lesser General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU Lesser General Public License | |
| * along with this library; if not, write to the Free Software | |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA | |
| */ | |
| #include <linux/ctype.h> | |
| #include "smb2pdu.h" | |
| #include "cifsglob.h" | |
| #include "cifsproto.h" | |
| #include "smb2proto.h" | |
| #include "cifs_debug.h" | |
| #include "cifs_unicode.h" | |
| #include "smb2status.h" | |
| #include "smb2glob.h" | |
| static int | |
| check_smb2_hdr(struct smb2_sync_hdr *shdr, __u64 mid) | |
| { | |
| __u64 wire_mid = le64_to_cpu(shdr->MessageId); | |
| /* | |
| * Make sure that this really is an SMB, that it is a response, | |
| * and that the message ids match. | |
| */ | |
| if ((shdr->ProtocolId == SMB2_PROTO_NUMBER) && | |
| (mid == wire_mid)) { | |
| if (shdr->Flags & SMB2_FLAGS_SERVER_TO_REDIR) | |
| return 0; | |
| else { | |
| /* only one valid case where server sends us request */ | |
| if (shdr->Command == SMB2_OPLOCK_BREAK) | |
| return 0; | |
| else | |
| cifs_dbg(VFS, "Received Request not response\n"); | |
| } | |
| } else { /* bad signature or mid */ | |
| if (shdr->ProtocolId != SMB2_PROTO_NUMBER) | |
| cifs_dbg(VFS, "Bad protocol string signature header %x\n", | |
| le32_to_cpu(shdr->ProtocolId)); | |
| if (mid != wire_mid) | |
| cifs_dbg(VFS, "Mids do not match: %llu and %llu\n", | |
| mid, wire_mid); | |
| } | |
| cifs_dbg(VFS, "Bad SMB detected. The Mid=%llu\n", wire_mid); | |
| return 1; | |
| } | |
| /* | |
| * The following table defines the expected "StructureSize" of SMB2 responses | |
| * in order by SMB2 command. This is similar to "wct" in SMB/CIFS responses. | |
| * | |
| * Note that commands are defined in smb2pdu.h in le16 but the array below is | |
| * indexed by command in host byte order | |
| */ | |
| static const __le16 smb2_rsp_struct_sizes[NUMBER_OF_SMB2_COMMANDS] = { | |
| /* SMB2_NEGOTIATE */ cpu_to_le16(65), | |
| /* SMB2_SESSION_SETUP */ cpu_to_le16(9), | |
| /* SMB2_LOGOFF */ cpu_to_le16(4), | |
| /* SMB2_TREE_CONNECT */ cpu_to_le16(16), | |
| /* SMB2_TREE_DISCONNECT */ cpu_to_le16(4), | |
| /* SMB2_CREATE */ cpu_to_le16(89), | |
| /* SMB2_CLOSE */ cpu_to_le16(60), | |
| /* SMB2_FLUSH */ cpu_to_le16(4), | |
| /* SMB2_READ */ cpu_to_le16(17), | |
| /* SMB2_WRITE */ cpu_to_le16(17), | |
| /* SMB2_LOCK */ cpu_to_le16(4), | |
| /* SMB2_IOCTL */ cpu_to_le16(49), | |
| /* BB CHECK this ... not listed in documentation */ | |
| /* SMB2_CANCEL */ cpu_to_le16(0), | |
| /* SMB2_ECHO */ cpu_to_le16(4), | |
| /* SMB2_QUERY_DIRECTORY */ cpu_to_le16(9), | |
| /* SMB2_CHANGE_NOTIFY */ cpu_to_le16(9), | |
| /* SMB2_QUERY_INFO */ cpu_to_le16(9), | |
| /* SMB2_SET_INFO */ cpu_to_le16(2), | |
| /* BB FIXME can also be 44 for lease break */ | |
| /* SMB2_OPLOCK_BREAK */ cpu_to_le16(24) | |
| }; | |
| int | |
| smb2_check_message(char *buf, unsigned int length, struct TCP_Server_Info *srvr) | |
| { | |
| struct smb2_pdu *pdu = (struct smb2_pdu *)buf; | |
| struct smb2_hdr *hdr = &pdu->hdr; | |
| struct smb2_sync_hdr *shdr = get_sync_hdr(buf); | |
| __u64 mid; | |
| __u32 len = get_rfc1002_length(buf); | |
| __u32 clc_len; /* calculated length */ | |
| int command; | |
| /* BB disable following printk later */ | |
| cifs_dbg(FYI, "%s length: 0x%x, smb_buf_length: 0x%x\n", | |
| __func__, length, len); | |
| /* | |
| * Add function to do table lookup of StructureSize by command | |
| * ie Validate the wct via smb2_struct_sizes table above | |
| */ | |
| if (shdr->ProtocolId == SMB2_TRANSFORM_PROTO_NUM) { | |
| struct smb2_transform_hdr *thdr = | |
| (struct smb2_transform_hdr *)buf; | |
| struct cifs_ses *ses = NULL; | |
| struct list_head *tmp; | |
| /* decrypt frame now that it is completely read in */ | |
| spin_lock(&cifs_tcp_ses_lock); | |
| list_for_each(tmp, &srvr->smb_ses_list) { | |
| ses = list_entry(tmp, struct cifs_ses, smb_ses_list); | |
| if (ses->Suid == thdr->SessionId) | |
| break; | |
| ses = NULL; | |
| } | |
| spin_unlock(&cifs_tcp_ses_lock); | |
| if (ses == NULL) { | |
| cifs_dbg(VFS, "no decryption - session id not found\n"); | |
| return 1; | |
| } | |
| } | |
| mid = le64_to_cpu(shdr->MessageId); | |
| if (length < sizeof(struct smb2_pdu)) { | |
| if ((length >= sizeof(struct smb2_hdr)) | |
| && (shdr->Status != 0)) { | |
| pdu->StructureSize2 = 0; | |
| /* | |
| * As with SMB/CIFS, on some error cases servers may | |
| * not return wct properly | |
| */ | |
| return 0; | |
| } else { | |
| cifs_dbg(VFS, "Length less than SMB header size\n"); | |
| } | |
| return 1; | |
| } | |
| if (len > CIFSMaxBufSize + MAX_SMB2_HDR_SIZE - 4) { | |
| cifs_dbg(VFS, "SMB length greater than maximum, mid=%llu\n", | |
| mid); | |
| return 1; | |
| } | |
| if (check_smb2_hdr(shdr, mid)) | |
| return 1; | |
| if (shdr->StructureSize != SMB2_HEADER_STRUCTURE_SIZE) { | |
| cifs_dbg(VFS, "Illegal structure size %u\n", | |
| le16_to_cpu(shdr->StructureSize)); | |
| return 1; | |
| } | |
| command = le16_to_cpu(shdr->Command); | |
| if (command >= NUMBER_OF_SMB2_COMMANDS) { | |
| cifs_dbg(VFS, "Illegal SMB2 command %d\n", command); | |
| return 1; | |
| } | |
| if (smb2_rsp_struct_sizes[command] != pdu->StructureSize2) { | |
| if (command != SMB2_OPLOCK_BREAK_HE && (shdr->Status == 0 || | |
| pdu->StructureSize2 != SMB2_ERROR_STRUCTURE_SIZE2)) { | |
| /* error packets have 9 byte structure size */ | |
| cifs_dbg(VFS, "Illegal response size %u for command %d\n", | |
| le16_to_cpu(pdu->StructureSize2), command); | |
| return 1; | |
| } else if (command == SMB2_OPLOCK_BREAK_HE | |
| && (shdr->Status == 0) | |
| && (le16_to_cpu(pdu->StructureSize2) != 44) | |
| && (le16_to_cpu(pdu->StructureSize2) != 36)) { | |
| /* special case for SMB2.1 lease break message */ | |
| cifs_dbg(VFS, "Illegal response size %d for oplock break\n", | |
| le16_to_cpu(pdu->StructureSize2)); | |
| return 1; | |
| } | |
| } | |
| if (4 + len != length) { | |
| cifs_dbg(VFS, "Total length %u RFC1002 length %u mismatch mid %llu\n", | |
| length, 4 + len, mid); | |
| return 1; | |
| } | |
| clc_len = smb2_calc_size(hdr); | |
| if (4 + len != clc_len) { | |
| cifs_dbg(FYI, "Calculated size %u length %u mismatch mid %llu\n", | |
| clc_len, 4 + len, mid); | |
| /* create failed on symlink */ | |
| if (command == SMB2_CREATE_HE && | |
| shdr->Status == STATUS_STOPPED_ON_SYMLINK) | |
| return 0; | |
| /* Windows 7 server returns 24 bytes more */ | |
| if (clc_len + 20 == len && command == SMB2_OPLOCK_BREAK_HE) | |
| return 0; | |
| /* server can return one byte more due to implied bcc[0] */ | |
| if (clc_len == 4 + len + 1) | |
| return 0; | |
| /* | |
| * MacOS server pads after SMB2.1 write response with 3 bytes | |
| * of junk. Other servers match RFC1001 len to actual | |
| * SMB2/SMB3 frame length (header + smb2 response specific data) | |
| * Log the server error (once), but allow it and continue | |
| * since the frame is parseable. | |
| */ | |
| if (clc_len < 4 /* RFC1001 header size */ + len) { | |
| printk_once(KERN_WARNING | |
| "SMB2 server sent bad RFC1001 len %d not %d\n", | |
| len, clc_len - 4); | |
| return 0; | |
| } | |
| return 1; | |
| } | |
| return 0; | |
| } | |
| /* | |
| * The size of the variable area depends on the offset and length fields | |
| * located in different fields for various SMB2 responses. SMB2 responses | |
| * with no variable length info, show an offset of zero for the offset field. | |
| */ | |
| static const bool has_smb2_data_area[NUMBER_OF_SMB2_COMMANDS] = { | |
| /* SMB2_NEGOTIATE */ true, | |
| /* SMB2_SESSION_SETUP */ true, | |
| /* SMB2_LOGOFF */ false, | |
| /* SMB2_TREE_CONNECT */ false, | |
| /* SMB2_TREE_DISCONNECT */ false, | |
| /* SMB2_CREATE */ true, | |
| /* SMB2_CLOSE */ false, | |
| /* SMB2_FLUSH */ false, | |
| /* SMB2_READ */ true, | |
| /* SMB2_WRITE */ false, | |
| /* SMB2_LOCK */ false, | |
| /* SMB2_IOCTL */ true, | |
| /* SMB2_CANCEL */ false, /* BB CHECK this not listed in documentation */ | |
| /* SMB2_ECHO */ false, | |
| /* SMB2_QUERY_DIRECTORY */ true, | |
| /* SMB2_CHANGE_NOTIFY */ true, | |
| /* SMB2_QUERY_INFO */ true, | |
| /* SMB2_SET_INFO */ false, | |
| /* SMB2_OPLOCK_BREAK */ false | |
| }; | |
| /* | |
| * Returns the pointer to the beginning of the data area. Length of the data | |
| * area and the offset to it (from the beginning of the smb are also returned. | |
| */ | |
| char * | |
| smb2_get_data_area_len(int *off, int *len, struct smb2_hdr *hdr) | |
| { | |
| struct smb2_sync_hdr *shdr = get_sync_hdr(hdr); | |
| *off = 0; | |
| *len = 0; | |
| /* error responses do not have data area */ | |
| if (shdr->Status && shdr->Status != STATUS_MORE_PROCESSING_REQUIRED && | |
| (((struct smb2_err_rsp *)hdr)->StructureSize) == | |
| SMB2_ERROR_STRUCTURE_SIZE2) | |
| return NULL; | |
| /* | |
| * Following commands have data areas so we have to get the location | |
| * of the data buffer offset and data buffer length for the particular | |
| * command. | |
| */ | |
| switch (shdr->Command) { | |
| case SMB2_NEGOTIATE: | |
| *off = le16_to_cpu( | |
| ((struct smb2_negotiate_rsp *)hdr)->SecurityBufferOffset); | |
| *len = le16_to_cpu( | |
| ((struct smb2_negotiate_rsp *)hdr)->SecurityBufferLength); | |
| break; | |
| case SMB2_SESSION_SETUP: | |
| *off = le16_to_cpu( | |
| ((struct smb2_sess_setup_rsp *)hdr)->SecurityBufferOffset); | |
| *len = le16_to_cpu( | |
| ((struct smb2_sess_setup_rsp *)hdr)->SecurityBufferLength); | |
| break; | |
| case SMB2_CREATE: | |
| *off = le32_to_cpu( | |
| ((struct smb2_create_rsp *)hdr)->CreateContextsOffset); | |
| *len = le32_to_cpu( | |
| ((struct smb2_create_rsp *)hdr)->CreateContextsLength); | |
| break; | |
| case SMB2_QUERY_INFO: | |
| *off = le16_to_cpu( | |
| ((struct smb2_query_info_rsp *)hdr)->OutputBufferOffset); | |
| *len = le32_to_cpu( | |
| ((struct smb2_query_info_rsp *)hdr)->OutputBufferLength); | |
| break; | |
| case SMB2_READ: | |
| *off = ((struct smb2_read_rsp *)hdr)->DataOffset; | |
| *len = le32_to_cpu(((struct smb2_read_rsp *)hdr)->DataLength); | |
| break; | |
| case SMB2_QUERY_DIRECTORY: | |
| *off = le16_to_cpu( | |
| ((struct smb2_query_directory_rsp *)hdr)->OutputBufferOffset); | |
| *len = le32_to_cpu( | |
| ((struct smb2_query_directory_rsp *)hdr)->OutputBufferLength); | |
| break; | |
| case SMB2_IOCTL: | |
| *off = le32_to_cpu( | |
| ((struct smb2_ioctl_rsp *)hdr)->OutputOffset); | |
| *len = le32_to_cpu(((struct smb2_ioctl_rsp *)hdr)->OutputCount); | |
| break; | |
| case SMB2_CHANGE_NOTIFY: | |
| default: | |
| /* BB FIXME for unimplemented cases above */ | |
| cifs_dbg(VFS, "no length check for command\n"); | |
| break; | |
| } | |
| /* | |
| * Invalid length or offset probably means data area is invalid, but | |
| * we have little choice but to ignore the data area in this case. | |
| */ | |
| if (*off > 4096) { | |
| cifs_dbg(VFS, "offset %d too large, data area ignored\n", *off); | |
| *len = 0; | |
| *off = 0; | |
| } else if (*off < 0) { | |
| cifs_dbg(VFS, "negative offset %d to data invalid ignore data area\n", | |
| *off); | |
| *off = 0; | |
| *len = 0; | |
| } else if (*len < 0) { | |
| cifs_dbg(VFS, "negative data length %d invalid, data area ignored\n", | |
| *len); | |
| *len = 0; | |
| } else if (*len > 128 * 1024) { | |
| cifs_dbg(VFS, "data area larger than 128K: %d\n", *len); | |
| *len = 0; | |
| } | |
| /* return pointer to beginning of data area, ie offset from SMB start */ | |
| if ((*off != 0) && (*len != 0)) | |
| return (char *)shdr + *off; | |
| else | |
| return NULL; | |
| } | |
| /* | |
| * Calculate the size of the SMB message based on the fixed header | |
| * portion, the number of word parameters and the data portion of the message. | |
| */ | |
| unsigned int | |
| smb2_calc_size(void *buf) | |
| { | |
| struct smb2_pdu *pdu = (struct smb2_pdu *)buf; | |
| struct smb2_hdr *hdr = &pdu->hdr; | |
| struct smb2_sync_hdr *shdr = get_sync_hdr(hdr); | |
| int offset; /* the offset from the beginning of SMB to data area */ | |
| int data_length; /* the length of the variable length data area */ | |
| /* Structure Size has already been checked to make sure it is 64 */ | |
| int len = 4 + le16_to_cpu(shdr->StructureSize); | |
| /* | |
| * StructureSize2, ie length of fixed parameter area has already | |
| * been checked to make sure it is the correct length. | |
| */ | |
| len += le16_to_cpu(pdu->StructureSize2); | |
| if (has_smb2_data_area[le16_to_cpu(shdr->Command)] == false) | |
| goto calc_size_exit; | |
| smb2_get_data_area_len(&offset, &data_length, hdr); | |
| cifs_dbg(FYI, "SMB2 data length %d offset %d\n", data_length, offset); | |
| if (data_length > 0) { | |
| /* | |
| * Check to make sure that data area begins after fixed area, | |
| * Note that last byte of the fixed area is part of data area | |
| * for some commands, typically those with odd StructureSize, | |
| * so we must add one to the calculation (and 4 to account for | |
| * the size of the RFC1001 hdr. | |
| */ | |
| if (offset + 4 + 1 < len) { | |
| cifs_dbg(VFS, "data area offset %d overlaps SMB2 header %d\n", | |
| offset + 4 + 1, len); | |
| data_length = 0; | |
| } else { | |
| len = 4 + offset + data_length; | |
| } | |
| } | |
| calc_size_exit: | |
| cifs_dbg(FYI, "SMB2 len %d\n", len); | |
| return len; | |
| } | |
| /* Note: caller must free return buffer */ | |
| __le16 * | |
| cifs_convert_path_to_utf16(const char *from, struct cifs_sb_info *cifs_sb) | |
| { | |
| int len; | |
| const char *start_of_path; | |
| __le16 *to; | |
| int map_type; | |
| if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SFM_CHR) | |
| map_type = SFM_MAP_UNI_RSVD; | |
| else if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR) | |
| map_type = SFU_MAP_UNI_RSVD; | |
| else | |
| map_type = NO_MAP_UNI_RSVD; | |
| /* Windows doesn't allow paths beginning with \ */ | |
| if (from[0] == '\\') | |
| start_of_path = from + 1; | |
| else | |
| start_of_path = from; | |
| to = cifs_strndup_to_utf16(start_of_path, PATH_MAX, &len, | |
| cifs_sb->local_nls, map_type); | |
| return to; | |
| } | |
| __le32 | |
| smb2_get_lease_state(struct cifsInodeInfo *cinode) | |
| { | |
| __le32 lease = 0; | |
| if (CIFS_CACHE_WRITE(cinode)) | |
| lease |= SMB2_LEASE_WRITE_CACHING; | |
| if (CIFS_CACHE_HANDLE(cinode)) | |
| lease |= SMB2_LEASE_HANDLE_CACHING; | |
| if (CIFS_CACHE_READ(cinode)) | |
| lease |= SMB2_LEASE_READ_CACHING; | |
| return lease; | |
| } | |
| struct smb2_lease_break_work { | |
| struct work_struct lease_break; | |
| struct tcon_link *tlink; | |
| __u8 lease_key[16]; | |
| __le32 lease_state; | |
| }; | |
| static void | |
| cifs_ses_oplock_break(struct work_struct *work) | |
| { | |
| struct smb2_lease_break_work *lw = container_of(work, | |
| struct smb2_lease_break_work, lease_break); | |
| int rc; | |
| rc = SMB2_lease_break(0, tlink_tcon(lw->tlink), lw->lease_key, | |
| lw->lease_state); | |
| cifs_dbg(FYI, "Lease release rc %d\n", rc); | |
| cifs_put_tlink(lw->tlink); | |
| kfree(lw); | |
| } | |
| static bool | |
| smb2_tcon_has_lease(struct cifs_tcon *tcon, struct smb2_lease_break *rsp, | |
| struct smb2_lease_break_work *lw) | |
| { | |
| bool found; | |
| __u8 lease_state; | |
| struct list_head *tmp; | |
| struct cifsFileInfo *cfile; | |
| struct TCP_Server_Info *server = tcon->ses->server; | |
| struct cifs_pending_open *open; | |
| struct cifsInodeInfo *cinode; | |
| int ack_req = le32_to_cpu(rsp->Flags & | |
| SMB2_NOTIFY_BREAK_LEASE_FLAG_ACK_REQUIRED); | |
| lease_state = le32_to_cpu(rsp->NewLeaseState); | |
| list_for_each(tmp, &tcon->openFileList) { | |
| cfile = list_entry(tmp, struct cifsFileInfo, tlist); | |
| cinode = CIFS_I(d_inode(cfile->dentry)); | |
| if (memcmp(cinode->lease_key, rsp->LeaseKey, | |
| SMB2_LEASE_KEY_SIZE)) | |
| continue; | |
| cifs_dbg(FYI, "found in the open list\n"); | |
| cifs_dbg(FYI, "lease key match, lease break 0x%x\n", | |
| le32_to_cpu(rsp->NewLeaseState)); | |
| server->ops->set_oplock_level(cinode, lease_state, 0, NULL); | |
| if (ack_req) | |
| cfile->oplock_break_cancelled = false; | |
| else | |
| cfile->oplock_break_cancelled = true; | |
| queue_work(cifsoplockd_wq, &cfile->oplock_break); | |
| kfree(lw); | |
| return true; | |
| } | |
| found = false; | |
| list_for_each_entry(open, &tcon->pending_opens, olist) { | |
| if (memcmp(open->lease_key, rsp->LeaseKey, | |
| SMB2_LEASE_KEY_SIZE)) | |
| continue; | |
| if (!found && ack_req) { | |
| found = true; | |
| memcpy(lw->lease_key, open->lease_key, | |
| SMB2_LEASE_KEY_SIZE); | |
| lw->tlink = cifs_get_tlink(open->tlink); | |
| queue_work(cifsiod_wq, &lw->lease_break); | |
| } | |
| cifs_dbg(FYI, "found in the pending open list\n"); | |
| cifs_dbg(FYI, "lease key match, lease break 0x%x\n", | |
| le32_to_cpu(rsp->NewLeaseState)); | |
| open->oplock = lease_state; | |
| } | |
| return found; | |
| } | |
| static bool | |
| smb2_is_valid_lease_break(char *buffer) | |
| { | |
| struct smb2_lease_break *rsp = (struct smb2_lease_break *)buffer; | |
| struct list_head *tmp, *tmp1, *tmp2; | |
| struct TCP_Server_Info *server; | |
| struct cifs_ses *ses; | |
| struct cifs_tcon *tcon; | |
| struct smb2_lease_break_work *lw; | |
| lw = kmalloc(sizeof(struct smb2_lease_break_work), GFP_KERNEL); | |
| if (!lw) | |
| return false; | |
| INIT_WORK(&lw->lease_break, cifs_ses_oplock_break); | |
| lw->lease_state = rsp->NewLeaseState; | |
| cifs_dbg(FYI, "Checking for lease break\n"); | |
| /* look up tcon based on tid & uid */ | |
| spin_lock(&cifs_tcp_ses_lock); | |
| list_for_each(tmp, &cifs_tcp_ses_list) { | |
| server = list_entry(tmp, struct TCP_Server_Info, tcp_ses_list); | |
| list_for_each(tmp1, &server->smb_ses_list) { | |
| ses = list_entry(tmp1, struct cifs_ses, smb_ses_list); | |
| list_for_each(tmp2, &ses->tcon_list) { | |
| tcon = list_entry(tmp2, struct cifs_tcon, | |
| tcon_list); | |
| spin_lock(&tcon->open_file_lock); | |
| cifs_stats_inc( | |
| &tcon->stats.cifs_stats.num_oplock_brks); | |
| if (smb2_tcon_has_lease(tcon, rsp, lw)) { | |
| spin_unlock(&tcon->open_file_lock); | |
| spin_unlock(&cifs_tcp_ses_lock); | |
| return true; | |
| } | |
| spin_unlock(&tcon->open_file_lock); | |
| } | |
| } | |
| } | |
| spin_unlock(&cifs_tcp_ses_lock); | |
| kfree(lw); | |
| cifs_dbg(FYI, "Can not process lease break - no lease matched\n"); | |
| return false; | |
| } | |
| bool | |
| smb2_is_valid_oplock_break(char *buffer, struct TCP_Server_Info *server) | |
| { | |
| struct smb2_oplock_break *rsp = (struct smb2_oplock_break *)buffer; | |
| struct list_head *tmp, *tmp1, *tmp2; | |
| struct cifs_ses *ses; | |
| struct cifs_tcon *tcon; | |
| struct cifsInodeInfo *cinode; | |
| struct cifsFileInfo *cfile; | |
| cifs_dbg(FYI, "Checking for oplock break\n"); | |
| if (rsp->hdr.sync_hdr.Command != SMB2_OPLOCK_BREAK) | |
| return false; | |
| if (rsp->StructureSize != | |
| smb2_rsp_struct_sizes[SMB2_OPLOCK_BREAK_HE]) { | |
| if (le16_to_cpu(rsp->StructureSize) == 44) | |
| return smb2_is_valid_lease_break(buffer); | |
| else | |
| return false; | |
| } | |
| cifs_dbg(FYI, "oplock level 0x%x\n", rsp->OplockLevel); | |
| /* look up tcon based on tid & uid */ | |
| spin_lock(&cifs_tcp_ses_lock); | |
| list_for_each(tmp, &server->smb_ses_list) { | |
| ses = list_entry(tmp, struct cifs_ses, smb_ses_list); | |
| list_for_each(tmp1, &ses->tcon_list) { | |
| tcon = list_entry(tmp1, struct cifs_tcon, tcon_list); | |
| cifs_stats_inc(&tcon->stats.cifs_stats.num_oplock_brks); | |
| spin_lock(&tcon->open_file_lock); | |
| list_for_each(tmp2, &tcon->openFileList) { | |
| cfile = list_entry(tmp2, struct cifsFileInfo, | |
| tlist); | |
| if (rsp->PersistentFid != | |
| cfile->fid.persistent_fid || | |
| rsp->VolatileFid != | |
| cfile->fid.volatile_fid) | |
| continue; | |
| cifs_dbg(FYI, "file id match, oplock break\n"); | |
| cinode = CIFS_I(d_inode(cfile->dentry)); | |
| spin_lock(&cfile->file_info_lock); | |
| if (!CIFS_CACHE_WRITE(cinode) && | |
| rsp->OplockLevel == SMB2_OPLOCK_LEVEL_NONE) | |
| cfile->oplock_break_cancelled = true; | |
| else | |
| cfile->oplock_break_cancelled = false; | |
| set_bit(CIFS_INODE_PENDING_OPLOCK_BREAK, | |
| &cinode->flags); | |
| /* | |
| * Set flag if the server downgrades the oplock | |
| * to L2 else clear. | |
| */ | |
| if (rsp->OplockLevel) | |
| set_bit( | |
| CIFS_INODE_DOWNGRADE_OPLOCK_TO_L2, | |
| &cinode->flags); | |
| else | |
| clear_bit( | |
| CIFS_INODE_DOWNGRADE_OPLOCK_TO_L2, | |
| &cinode->flags); | |
| spin_unlock(&cfile->file_info_lock); | |
| queue_work(cifsoplockd_wq, | |
| &cfile->oplock_break); | |
| spin_unlock(&tcon->open_file_lock); | |
| spin_unlock(&cifs_tcp_ses_lock); | |
| return true; | |
| } | |
| spin_unlock(&tcon->open_file_lock); | |
| spin_unlock(&cifs_tcp_ses_lock); | |
| cifs_dbg(FYI, "No matching file for oplock break\n"); | |
| return true; | |
| } | |
| } | |
| spin_unlock(&cifs_tcp_ses_lock); | |
| cifs_dbg(FYI, "Can not process oplock break for non-existent connection\n"); | |
| return false; | |
| } | |
| void | |
| smb2_cancelled_close_fid(struct work_struct *work) | |
| { | |
| struct close_cancelled_open *cancelled = container_of(work, | |
| struct close_cancelled_open, work); | |
| cifs_dbg(VFS, "Close unmatched open\n"); | |
| SMB2_close(0, cancelled->tcon, cancelled->fid.persistent_fid, | |
| cancelled->fid.volatile_fid); | |
| cifs_put_tcon(cancelled->tcon); | |
| kfree(cancelled); | |
| } | |
| int | |
| smb2_handle_cancelled_mid(char *buffer, struct TCP_Server_Info *server) | |
| { | |
| struct smb2_sync_hdr *sync_hdr = get_sync_hdr(buffer); | |
| struct smb2_create_rsp *rsp = (struct smb2_create_rsp *)buffer; | |
| struct cifs_tcon *tcon; | |
| struct close_cancelled_open *cancelled; | |
| if (sync_hdr->Command != SMB2_CREATE || | |
| sync_hdr->Status != STATUS_SUCCESS) | |
| return 0; | |
| cancelled = kzalloc(sizeof(*cancelled), GFP_KERNEL); | |
| if (!cancelled) | |
| return -ENOMEM; | |
| tcon = smb2_find_smb_tcon(server, sync_hdr->SessionId, | |
| sync_hdr->TreeId); | |
| if (!tcon) { | |
| kfree(cancelled); | |
| return -ENOENT; | |
| } | |
| cancelled->fid.persistent_fid = rsp->PersistentFileId; | |
| cancelled->fid.volatile_fid = rsp->VolatileFileId; | |
| cancelled->tcon = tcon; | |
| INIT_WORK(&cancelled->work, smb2_cancelled_close_fid); | |
| queue_work(cifsiod_wq, &cancelled->work); | |
| return 0; | |
| } |