| /* | |
| * common.h - Common definitions for both Kernel and user-mode utilities | |
| * | |
| * Copyright (C) 2005, 2006 | |
| * Avishay Traeger (avishay@gmail.com) | |
| * Copyright (C) 2008, 2009 | |
| * Boaz Harrosh <ooo@electrozaur.com> | |
| * | |
| * Copyrights for code taken from ext2: | |
| * Copyright (C) 1992, 1993, 1994, 1995 | |
| * Remy Card (card@masi.ibp.fr) | |
| * Laboratoire MASI - Institut Blaise Pascal | |
| * Universite Pierre et Marie Curie (Paris VI) | |
| * from | |
| * linux/fs/minix/inode.c | |
| * Copyright (C) 1991, 1992 Linus Torvalds | |
| * | |
| * This file is part of exofs. | |
| * | |
| * exofs is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License as published by | |
| * the Free Software Foundation. Since it is based on ext2, and the only | |
| * valid version of GPL for the Linux kernel is version 2, the only valid | |
| * version of GPL for exofs is version 2. | |
| * | |
| * exofs is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with exofs; if not, write to the Free Software | |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA | |
| */ | |
| #ifndef __EXOFS_COM_H__ | |
| #define __EXOFS_COM_H__ | |
| #include <linux/types.h> | |
| #include <scsi/osd_attributes.h> | |
| #include <scsi/osd_initiator.h> | |
| #include <scsi/osd_sec.h> | |
| /**************************************************************************** | |
| * Object ID related defines | |
| * NOTE: inode# = object ID - EXOFS_OBJ_OFF | |
| ****************************************************************************/ | |
| #define EXOFS_MIN_PID 0x10000 /* Smallest partition ID */ | |
| #define EXOFS_OBJ_OFF 0x10000 /* offset for objects */ | |
| #define EXOFS_SUPER_ID 0x10000 /* object ID for on-disk superblock */ | |
| #define EXOFS_DEVTABLE_ID 0x10001 /* object ID for on-disk device table */ | |
| #define EXOFS_ROOT_ID 0x10002 /* object ID for root directory */ | |
| /* exofs Application specific page/attribute */ | |
| /* Inode attrs */ | |
| # define EXOFS_APAGE_FS_DATA (OSD_APAGE_APP_DEFINED_FIRST + 3) | |
| # define EXOFS_ATTR_INODE_DATA 1 | |
| # define EXOFS_ATTR_INODE_FILE_LAYOUT 2 | |
| # define EXOFS_ATTR_INODE_DIR_LAYOUT 3 | |
| /* Partition attrs */ | |
| # define EXOFS_APAGE_SB_DATA (0xF0000000U + 3) | |
| # define EXOFS_ATTR_SB_STATS 1 | |
| /* | |
| * The maximum number of files we can have is limited by the size of the | |
| * inode number. This is the largest object ID that the file system supports. | |
| * Object IDs 0, 1, and 2 are always in use (see above defines). | |
| */ | |
| enum { | |
| EXOFS_MAX_INO_ID = (sizeof(ino_t) * 8 == 64) ? ULLONG_MAX : | |
| (1ULL << (sizeof(ino_t) * 8ULL - 1ULL)), | |
| EXOFS_MAX_ID = (EXOFS_MAX_INO_ID - 1 - EXOFS_OBJ_OFF), | |
| }; | |
| /**************************************************************************** | |
| * Misc. | |
| ****************************************************************************/ | |
| #define EXOFS_BLKSHIFT 12 | |
| #define EXOFS_BLKSIZE (1UL << EXOFS_BLKSHIFT) | |
| /**************************************************************************** | |
| * superblock-related things | |
| ****************************************************************************/ | |
| #define EXOFS_SUPER_MAGIC 0x5DF5 | |
| /* | |
| * The file system control block - stored in object EXOFS_SUPER_ID's data. | |
| * This is where the in-memory superblock is stored on disk. | |
| */ | |
| enum {EXOFS_FSCB_VER = 1, EXOFS_DT_VER = 1}; | |
| struct exofs_fscb { | |
| __le64 s_nextid; /* Only used after mkfs */ | |
| __le64 s_numfiles; /* Only used after mkfs */ | |
| __le32 s_version; /* == EXOFS_FSCB_VER */ | |
| __le16 s_magic; /* Magic signature */ | |
| __le16 s_newfs; /* Non-zero if this is a new fs */ | |
| /* From here on it's a static part, only written by mkexofs */ | |
| __le64 s_dev_table_oid; /* Resurved, not used */ | |
| __le64 s_dev_table_count; /* == 0 means no dev_table */ | |
| } __packed; | |
| /* | |
| * This struct is set on the FS partition's attributes. | |
| * [EXOFS_APAGE_SB_DATA, EXOFS_ATTR_SB_STATS] and is written together | |
| * with the create command, to atomically persist the sb writeable information. | |
| */ | |
| struct exofs_sb_stats { | |
| __le64 s_nextid; /* Highest object ID used */ | |
| __le64 s_numfiles; /* Number of files on fs */ | |
| } __packed; | |
| /* | |
| * Describes the raid used in the FS. It is part of the device table. | |
| * This here is taken from the pNFS-objects definition. In exofs we | |
| * use one raid policy through-out the filesystem. (NOTE: the funny | |
| * alignment at beginning. We take care of it at exofs_device_table. | |
| */ | |
| struct exofs_dt_data_map { | |
| __le32 cb_num_comps; | |
| __le64 cb_stripe_unit; | |
| __le32 cb_group_width; | |
| __le32 cb_group_depth; | |
| __le32 cb_mirror_cnt; | |
| __le32 cb_raid_algorithm; | |
| } __packed; | |
| /* | |
| * This is an osd device information descriptor. It is a single entry in | |
| * the exofs device table. It describes an osd target lun which | |
| * contains data belonging to this FS. (Same partition_id on all devices) | |
| */ | |
| struct exofs_dt_device_info { | |
| __le32 systemid_len; | |
| u8 systemid[OSD_SYSTEMID_LEN]; | |
| __le64 long_name_offset; /* If !0 then offset-in-file */ | |
| __le32 osdname_len; /* */ | |
| u8 osdname[44]; /* Embbeded, Usually an asci uuid */ | |
| } __packed; | |
| /* | |
| * The EXOFS device table - stored in object EXOFS_DEVTABLE_ID's data. | |
| * It contains the raid used for this multy-device FS and an array of | |
| * participating devices. | |
| */ | |
| struct exofs_device_table { | |
| __le32 dt_version; /* == EXOFS_DT_VER */ | |
| struct exofs_dt_data_map dt_data_map; /* Raid policy to use */ | |
| /* Resurved space For future use. Total includeing this: | |
| * (8 * sizeof(le64)) | |
| */ | |
| __le64 __Resurved[4]; | |
| __le64 dt_num_devices; /* Array size */ | |
| struct exofs_dt_device_info dt_dev_table[]; /* Array of devices */ | |
| } __packed; | |
| /**************************************************************************** | |
| * inode-related things | |
| ****************************************************************************/ | |
| #define EXOFS_IDATA 5 | |
| /* | |
| * The file control block - stored in an object's attributes. This is where | |
| * the in-memory inode is stored on disk. | |
| */ | |
| struct exofs_fcb { | |
| __le64 i_size; /* Size of the file */ | |
| __le16 i_mode; /* File mode */ | |
| __le16 i_links_count; /* Links count */ | |
| __le32 i_uid; /* Owner Uid */ | |
| __le32 i_gid; /* Group Id */ | |
| __le32 i_atime; /* Access time */ | |
| __le32 i_ctime; /* Creation time */ | |
| __le32 i_mtime; /* Modification time */ | |
| __le32 i_flags; /* File flags (unused for now)*/ | |
| __le32 i_generation; /* File version (for NFS) */ | |
| __le32 i_data[EXOFS_IDATA]; /* Short symlink names and device #s */ | |
| }; | |
| #define EXOFS_INO_ATTR_SIZE sizeof(struct exofs_fcb) | |
| /* This is the Attribute the fcb is stored in */ | |
| static const struct __weak osd_attr g_attr_inode_data = ATTR_DEF( | |
| EXOFS_APAGE_FS_DATA, | |
| EXOFS_ATTR_INODE_DATA, | |
| EXOFS_INO_ATTR_SIZE); | |
| /**************************************************************************** | |
| * dentry-related things | |
| ****************************************************************************/ | |
| #define EXOFS_NAME_LEN 255 | |
| /* | |
| * The on-disk directory entry | |
| */ | |
| struct exofs_dir_entry { | |
| __le64 inode_no; /* inode number */ | |
| __le16 rec_len; /* directory entry length */ | |
| u8 name_len; /* name length */ | |
| u8 file_type; /* umm...file type */ | |
| char name[EXOFS_NAME_LEN]; /* file name */ | |
| }; | |
| enum { | |
| EXOFS_FT_UNKNOWN, | |
| EXOFS_FT_REG_FILE, | |
| EXOFS_FT_DIR, | |
| EXOFS_FT_CHRDEV, | |
| EXOFS_FT_BLKDEV, | |
| EXOFS_FT_FIFO, | |
| EXOFS_FT_SOCK, | |
| EXOFS_FT_SYMLINK, | |
| EXOFS_FT_MAX | |
| }; | |
| #define EXOFS_DIR_PAD 4 | |
| #define EXOFS_DIR_ROUND (EXOFS_DIR_PAD - 1) | |
| #define EXOFS_DIR_REC_LEN(name_len) \ | |
| (((name_len) + offsetof(struct exofs_dir_entry, name) + \ | |
| EXOFS_DIR_ROUND) & ~EXOFS_DIR_ROUND) | |
| /* | |
| * The on-disk (optional) layout structure. | |
| * sits in an EXOFS_ATTR_INODE_FILE_LAYOUT or EXOFS_ATTR_INODE_DIR_LAYOUT | |
| * attribute, attached to any inode, usually to a directory. | |
| */ | |
| enum exofs_inode_layout_gen_functions { | |
| LAYOUT_MOVING_WINDOW = 0, | |
| LAYOUT_IMPLICT = 1, | |
| }; | |
| struct exofs_on_disk_inode_layout { | |
| __le16 gen_func; /* One of enum exofs_inode_layout_gen_functions */ | |
| __le16 pad; | |
| union { | |
| /* gen_func == LAYOUT_MOVING_WINDOW (default) */ | |
| struct exofs_layout_sliding_window { | |
| __le32 num_devices; /* first n devices in global-table*/ | |
| } sliding_window __packed; | |
| /* gen_func == LAYOUT_IMPLICT */ | |
| struct exofs_layout_implict_list { | |
| struct exofs_dt_data_map data_map; | |
| /* Variable array of size data_map.cb_num_comps. These | |
| * are device indexes of the devices in the global table | |
| */ | |
| __le32 dev_indexes[]; | |
| } implict __packed; | |
| }; | |
| } __packed; | |
| static inline size_t exofs_on_disk_inode_layout_size(unsigned max_devs) | |
| { | |
| return sizeof(struct exofs_on_disk_inode_layout) + | |
| max_devs * sizeof(__le32); | |
| } | |
| #endif /*ifndef __EXOFS_COM_H__*/ |