| /* -*- mode: c; c-basic-offset: 8; -*- | |
| * vim: noexpandtab sw=8 ts=8 sts=0: | |
| * | |
| * io.c | |
| * | |
| * Buffer cache handling | |
| * | |
| * Copyright (C) 2002, 2004 Oracle. All rights reserved. | |
| * | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public | |
| * License as published by the Free Software Foundation; either | |
| * version 2 of the License, or (at your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU | |
| * General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public | |
| * License along with this program; if not, write to the | |
| * Free Software Foundation, Inc., 59 Temple Place - Suite 330, | |
| * Boston, MA 021110-1307, USA. | |
| */ | |
| #include <linux/fs.h> | |
| #include <linux/types.h> | |
| #include <linux/highmem.h> | |
| #include <linux/bio.h> | |
| #include <cluster/masklog.h> | |
| #include "ocfs2.h" | |
| #include "alloc.h" | |
| #include "inode.h" | |
| #include "journal.h" | |
| #include "uptodate.h" | |
| #include "buffer_head_io.h" | |
| #include "ocfs2_trace.h" | |
| /* | |
| * Bits on bh->b_state used by ocfs2. | |
| * | |
| * These MUST be after the JBD2 bits. Hence, we use BH_JBDPrivateStart. | |
| */ | |
| enum ocfs2_state_bits { | |
| BH_NeedsValidate = BH_JBDPrivateStart, | |
| }; | |
| /* Expand the magic b_state functions */ | |
| BUFFER_FNS(NeedsValidate, needs_validate); | |
| int ocfs2_write_block(struct ocfs2_super *osb, struct buffer_head *bh, | |
| struct ocfs2_caching_info *ci) | |
| { | |
| int ret = 0; | |
| trace_ocfs2_write_block((unsigned long long)bh->b_blocknr, ci); | |
| BUG_ON(bh->b_blocknr < OCFS2_SUPER_BLOCK_BLKNO); | |
| BUG_ON(buffer_jbd(bh)); | |
| /* No need to check for a soft readonly file system here. non | |
| * journalled writes are only ever done on system files which | |
| * can get modified during recovery even if read-only. */ | |
| if (ocfs2_is_hard_readonly(osb)) { | |
| ret = -EROFS; | |
| mlog_errno(ret); | |
| goto out; | |
| } | |
| ocfs2_metadata_cache_io_lock(ci); | |
| lock_buffer(bh); | |
| set_buffer_uptodate(bh); | |
| /* remove from dirty list before I/O. */ | |
| clear_buffer_dirty(bh); | |
| get_bh(bh); /* for end_buffer_write_sync() */ | |
| bh->b_end_io = end_buffer_write_sync; | |
| submit_bh(REQ_OP_WRITE, 0, bh); | |
| wait_on_buffer(bh); | |
| if (buffer_uptodate(bh)) { | |
| ocfs2_set_buffer_uptodate(ci, bh); | |
| } else { | |
| /* We don't need to remove the clustered uptodate | |
| * information for this bh as it's not marked locally | |
| * uptodate. */ | |
| ret = -EIO; | |
| mlog_errno(ret); | |
| } | |
| ocfs2_metadata_cache_io_unlock(ci); | |
| out: | |
| return ret; | |
| } | |
| int ocfs2_read_blocks_sync(struct ocfs2_super *osb, u64 block, | |
| unsigned int nr, struct buffer_head *bhs[]) | |
| { | |
| int status = 0; | |
| unsigned int i; | |
| struct buffer_head *bh; | |
| trace_ocfs2_read_blocks_sync((unsigned long long)block, nr); | |
| if (!nr) | |
| goto bail; | |
| for (i = 0 ; i < nr ; i++) { | |
| if (bhs[i] == NULL) { | |
| bhs[i] = sb_getblk(osb->sb, block++); | |
| if (bhs[i] == NULL) { | |
| status = -ENOMEM; | |
| mlog_errno(status); | |
| goto bail; | |
| } | |
| } | |
| bh = bhs[i]; | |
| if (buffer_jbd(bh)) { | |
| trace_ocfs2_read_blocks_sync_jbd( | |
| (unsigned long long)bh->b_blocknr); | |
| continue; | |
| } | |
| if (buffer_dirty(bh)) { | |
| /* This should probably be a BUG, or | |
| * at least return an error. */ | |
| mlog(ML_ERROR, | |
| "trying to sync read a dirty " | |
| "buffer! (blocknr = %llu), skipping\n", | |
| (unsigned long long)bh->b_blocknr); | |
| continue; | |
| } | |
| lock_buffer(bh); | |
| if (buffer_jbd(bh)) { | |
| #ifdef CATCH_BH_JBD_RACES | |
| mlog(ML_ERROR, | |
| "block %llu had the JBD bit set " | |
| "while I was in lock_buffer!", | |
| (unsigned long long)bh->b_blocknr); | |
| BUG(); | |
| #else | |
| unlock_buffer(bh); | |
| continue; | |
| #endif | |
| } | |
| clear_buffer_uptodate(bh); | |
| get_bh(bh); /* for end_buffer_read_sync() */ | |
| bh->b_end_io = end_buffer_read_sync; | |
| submit_bh(REQ_OP_READ, 0, bh); | |
| } | |
| for (i = nr; i > 0; i--) { | |
| bh = bhs[i - 1]; | |
| /* No need to wait on the buffer if it's managed by JBD. */ | |
| if (!buffer_jbd(bh)) | |
| wait_on_buffer(bh); | |
| if (!buffer_uptodate(bh)) { | |
| /* Status won't be cleared from here on out, | |
| * so we can safely record this and loop back | |
| * to cleanup the other buffers. */ | |
| status = -EIO; | |
| put_bh(bh); | |
| bhs[i - 1] = NULL; | |
| } | |
| } | |
| bail: | |
| return status; | |
| } | |
| int ocfs2_read_blocks(struct ocfs2_caching_info *ci, u64 block, int nr, | |
| struct buffer_head *bhs[], int flags, | |
| int (*validate)(struct super_block *sb, | |
| struct buffer_head *bh)) | |
| { | |
| int status = 0; | |
| int i, ignore_cache = 0; | |
| struct buffer_head *bh; | |
| struct super_block *sb = ocfs2_metadata_cache_get_super(ci); | |
| trace_ocfs2_read_blocks_begin(ci, (unsigned long long)block, nr, flags); | |
| BUG_ON(!ci); | |
| BUG_ON((flags & OCFS2_BH_READAHEAD) && | |
| (flags & OCFS2_BH_IGNORE_CACHE)); | |
| if (bhs == NULL) { | |
| status = -EINVAL; | |
| mlog_errno(status); | |
| goto bail; | |
| } | |
| if (nr < 0) { | |
| mlog(ML_ERROR, "asked to read %d blocks!\n", nr); | |
| status = -EINVAL; | |
| mlog_errno(status); | |
| goto bail; | |
| } | |
| if (nr == 0) { | |
| status = 0; | |
| goto bail; | |
| } | |
| ocfs2_metadata_cache_io_lock(ci); | |
| for (i = 0 ; i < nr ; i++) { | |
| if (bhs[i] == NULL) { | |
| bhs[i] = sb_getblk(sb, block++); | |
| if (bhs[i] == NULL) { | |
| ocfs2_metadata_cache_io_unlock(ci); | |
| status = -ENOMEM; | |
| mlog_errno(status); | |
| goto bail; | |
| } | |
| } | |
| bh = bhs[i]; | |
| ignore_cache = (flags & OCFS2_BH_IGNORE_CACHE); | |
| /* There are three read-ahead cases here which we need to | |
| * be concerned with. All three assume a buffer has | |
| * previously been submitted with OCFS2_BH_READAHEAD | |
| * and it hasn't yet completed I/O. | |
| * | |
| * 1) The current request is sync to disk. This rarely | |
| * happens these days, and never when performance | |
| * matters - the code can just wait on the buffer | |
| * lock and re-submit. | |
| * | |
| * 2) The current request is cached, but not | |
| * readahead. ocfs2_buffer_uptodate() will return | |
| * false anyway, so we'll wind up waiting on the | |
| * buffer lock to do I/O. We re-check the request | |
| * with after getting the lock to avoid a re-submit. | |
| * | |
| * 3) The current request is readahead (and so must | |
| * also be a caching one). We short circuit if the | |
| * buffer is locked (under I/O) and if it's in the | |
| * uptodate cache. The re-check from #2 catches the | |
| * case that the previous read-ahead completes just | |
| * before our is-it-in-flight check. | |
| */ | |
| if (!ignore_cache && !ocfs2_buffer_uptodate(ci, bh)) { | |
| trace_ocfs2_read_blocks_from_disk( | |
| (unsigned long long)bh->b_blocknr, | |
| (unsigned long long)ocfs2_metadata_cache_owner(ci)); | |
| /* We're using ignore_cache here to say | |
| * "go to disk" */ | |
| ignore_cache = 1; | |
| } | |
| trace_ocfs2_read_blocks_bh((unsigned long long)bh->b_blocknr, | |
| ignore_cache, buffer_jbd(bh), buffer_dirty(bh)); | |
| if (buffer_jbd(bh)) { | |
| continue; | |
| } | |
| if (ignore_cache) { | |
| if (buffer_dirty(bh)) { | |
| /* This should probably be a BUG, or | |
| * at least return an error. */ | |
| continue; | |
| } | |
| /* A read-ahead request was made - if the | |
| * buffer is already under read-ahead from a | |
| * previously submitted request than we are | |
| * done here. */ | |
| if ((flags & OCFS2_BH_READAHEAD) | |
| && ocfs2_buffer_read_ahead(ci, bh)) | |
| continue; | |
| lock_buffer(bh); | |
| if (buffer_jbd(bh)) { | |
| #ifdef CATCH_BH_JBD_RACES | |
| mlog(ML_ERROR, "block %llu had the JBD bit set " | |
| "while I was in lock_buffer!", | |
| (unsigned long long)bh->b_blocknr); | |
| BUG(); | |
| #else | |
| unlock_buffer(bh); | |
| continue; | |
| #endif | |
| } | |
| /* Re-check ocfs2_buffer_uptodate() as a | |
| * previously read-ahead buffer may have | |
| * completed I/O while we were waiting for the | |
| * buffer lock. */ | |
| if (!(flags & OCFS2_BH_IGNORE_CACHE) | |
| && !(flags & OCFS2_BH_READAHEAD) | |
| && ocfs2_buffer_uptodate(ci, bh)) { | |
| unlock_buffer(bh); | |
| continue; | |
| } | |
| clear_buffer_uptodate(bh); | |
| get_bh(bh); /* for end_buffer_read_sync() */ | |
| if (validate) | |
| set_buffer_needs_validate(bh); | |
| bh->b_end_io = end_buffer_read_sync; | |
| submit_bh(REQ_OP_READ, 0, bh); | |
| continue; | |
| } | |
| } | |
| status = 0; | |
| for (i = (nr - 1); i >= 0; i--) { | |
| bh = bhs[i]; | |
| if (!(flags & OCFS2_BH_READAHEAD)) { | |
| if (status) { | |
| /* Clear the rest of the buffers on error */ | |
| put_bh(bh); | |
| bhs[i] = NULL; | |
| continue; | |
| } | |
| /* We know this can't have changed as we hold the | |
| * owner sem. Avoid doing any work on the bh if the | |
| * journal has it. */ | |
| if (!buffer_jbd(bh)) | |
| wait_on_buffer(bh); | |
| if (!buffer_uptodate(bh)) { | |
| /* Status won't be cleared from here on out, | |
| * so we can safely record this and loop back | |
| * to cleanup the other buffers. Don't need to | |
| * remove the clustered uptodate information | |
| * for this bh as it's not marked locally | |
| * uptodate. */ | |
| status = -EIO; | |
| put_bh(bh); | |
| bhs[i] = NULL; | |
| continue; | |
| } | |
| if (buffer_needs_validate(bh)) { | |
| /* We never set NeedsValidate if the | |
| * buffer was held by the journal, so | |
| * that better not have changed */ | |
| BUG_ON(buffer_jbd(bh)); | |
| clear_buffer_needs_validate(bh); | |
| status = validate(sb, bh); | |
| if (status) { | |
| put_bh(bh); | |
| bhs[i] = NULL; | |
| continue; | |
| } | |
| } | |
| } | |
| /* Always set the buffer in the cache, even if it was | |
| * a forced read, or read-ahead which hasn't yet | |
| * completed. */ | |
| ocfs2_set_buffer_uptodate(ci, bh); | |
| } | |
| ocfs2_metadata_cache_io_unlock(ci); | |
| trace_ocfs2_read_blocks_end((unsigned long long)block, nr, | |
| flags, ignore_cache); | |
| bail: | |
| return status; | |
| } | |
| /* Check whether the blkno is the super block or one of the backups. */ | |
| static void ocfs2_check_super_or_backup(struct super_block *sb, | |
| sector_t blkno) | |
| { | |
| int i; | |
| u64 backup_blkno; | |
| if (blkno == OCFS2_SUPER_BLOCK_BLKNO) | |
| return; | |
| for (i = 0; i < OCFS2_MAX_BACKUP_SUPERBLOCKS; i++) { | |
| backup_blkno = ocfs2_backup_super_blkno(sb, i); | |
| if (backup_blkno == blkno) | |
| return; | |
| } | |
| BUG(); | |
| } | |
| /* | |
| * Write super block and backups doesn't need to collaborate with journal, | |
| * so we don't need to lock ip_io_mutex and ci doesn't need to bea passed | |
| * into this function. | |
| */ | |
| int ocfs2_write_super_or_backup(struct ocfs2_super *osb, | |
| struct buffer_head *bh) | |
| { | |
| int ret = 0; | |
| struct ocfs2_dinode *di = (struct ocfs2_dinode *)bh->b_data; | |
| BUG_ON(buffer_jbd(bh)); | |
| ocfs2_check_super_or_backup(osb->sb, bh->b_blocknr); | |
| if (ocfs2_is_hard_readonly(osb) || ocfs2_is_soft_readonly(osb)) { | |
| ret = -EROFS; | |
| mlog_errno(ret); | |
| goto out; | |
| } | |
| lock_buffer(bh); | |
| set_buffer_uptodate(bh); | |
| /* remove from dirty list before I/O. */ | |
| clear_buffer_dirty(bh); | |
| get_bh(bh); /* for end_buffer_write_sync() */ | |
| bh->b_end_io = end_buffer_write_sync; | |
| ocfs2_compute_meta_ecc(osb->sb, bh->b_data, &di->i_check); | |
| submit_bh(REQ_OP_WRITE, 0, bh); | |
| wait_on_buffer(bh); | |
| if (!buffer_uptodate(bh)) { | |
| ret = -EIO; | |
| mlog_errno(ret); | |
| } | |
| out: | |
| return ret; | |
| } |