| /* align.c - handle alignment exceptions for the Power PC. | |
| * | |
| * Copyright (c) 1996 Paul Mackerras <paulus@cs.anu.edu.au> | |
| * Copyright (c) 1998-1999 TiVo, Inc. | |
| * PowerPC 403GCX modifications. | |
| * Copyright (c) 1999 Grant Erickson <grant@lcse.umn.edu> | |
| * PowerPC 403GCX/405GP modifications. | |
| * Copyright (c) 2001-2002 PPC64 team, IBM Corp | |
| * 64-bit and Power4 support | |
| * Copyright (c) 2005 Benjamin Herrenschmidt, IBM Corp | |
| * <benh@kernel.crashing.org> | |
| * Merge ppc32 and ppc64 implementations | |
| * | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public License | |
| * as published by the Free Software Foundation; either version | |
| * 2 of the License, or (at your option) any later version. | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/mm.h> | |
| #include <asm/processor.h> | |
| #include <asm/uaccess.h> | |
| #include <asm/cache.h> | |
| #include <asm/cputable.h> | |
| #include <asm/emulated_ops.h> | |
| #include <asm/switch_to.h> | |
| #include <asm/disassemble.h> | |
| struct aligninfo { | |
| unsigned char len; | |
| unsigned char flags; | |
| }; | |
| #define INVALID { 0, 0 } | |
| /* Bits in the flags field */ | |
| #define LD 0 /* load */ | |
| #define ST 1 /* store */ | |
| #define SE 2 /* sign-extend value, or FP ld/st as word */ | |
| #define F 4 /* to/from fp regs */ | |
| #define U 8 /* update index register */ | |
| #define M 0x10 /* multiple load/store */ | |
| #define SW 0x20 /* byte swap */ | |
| #define S 0x40 /* single-precision fp or... */ | |
| #define SX 0x40 /* ... byte count in XER */ | |
| #define HARD 0x80 /* string, stwcx. */ | |
| #define E4 0x40 /* SPE endianness is word */ | |
| #define E8 0x80 /* SPE endianness is double word */ | |
| #define SPLT 0x80 /* VSX SPLAT load */ | |
| /* DSISR bits reported for a DCBZ instruction: */ | |
| #define DCBZ 0x5f /* 8xx/82xx dcbz faults when cache not enabled */ | |
| /* | |
| * The PowerPC stores certain bits of the instruction that caused the | |
| * alignment exception in the DSISR register. This array maps those | |
| * bits to information about the operand length and what the | |
| * instruction would do. | |
| */ | |
| static struct aligninfo aligninfo[128] = { | |
| { 4, LD }, /* 00 0 0000: lwz / lwarx */ | |
| INVALID, /* 00 0 0001 */ | |
| { 4, ST }, /* 00 0 0010: stw */ | |
| INVALID, /* 00 0 0011 */ | |
| { 2, LD }, /* 00 0 0100: lhz */ | |
| { 2, LD+SE }, /* 00 0 0101: lha */ | |
| { 2, ST }, /* 00 0 0110: sth */ | |
| { 4, LD+M }, /* 00 0 0111: lmw */ | |
| { 4, LD+F+S }, /* 00 0 1000: lfs */ | |
| { 8, LD+F }, /* 00 0 1001: lfd */ | |
| { 4, ST+F+S }, /* 00 0 1010: stfs */ | |
| { 8, ST+F }, /* 00 0 1011: stfd */ | |
| { 16, LD }, /* 00 0 1100: lq */ | |
| { 8, LD }, /* 00 0 1101: ld/ldu/lwa */ | |
| INVALID, /* 00 0 1110 */ | |
| { 8, ST }, /* 00 0 1111: std/stdu */ | |
| { 4, LD+U }, /* 00 1 0000: lwzu */ | |
| INVALID, /* 00 1 0001 */ | |
| { 4, ST+U }, /* 00 1 0010: stwu */ | |
| INVALID, /* 00 1 0011 */ | |
| { 2, LD+U }, /* 00 1 0100: lhzu */ | |
| { 2, LD+SE+U }, /* 00 1 0101: lhau */ | |
| { 2, ST+U }, /* 00 1 0110: sthu */ | |
| { 4, ST+M }, /* 00 1 0111: stmw */ | |
| { 4, LD+F+S+U }, /* 00 1 1000: lfsu */ | |
| { 8, LD+F+U }, /* 00 1 1001: lfdu */ | |
| { 4, ST+F+S+U }, /* 00 1 1010: stfsu */ | |
| { 8, ST+F+U }, /* 00 1 1011: stfdu */ | |
| { 16, LD+F }, /* 00 1 1100: lfdp */ | |
| INVALID, /* 00 1 1101 */ | |
| { 16, ST+F }, /* 00 1 1110: stfdp */ | |
| INVALID, /* 00 1 1111 */ | |
| { 8, LD }, /* 01 0 0000: ldx */ | |
| INVALID, /* 01 0 0001 */ | |
| { 8, ST }, /* 01 0 0010: stdx */ | |
| INVALID, /* 01 0 0011 */ | |
| INVALID, /* 01 0 0100 */ | |
| { 4, LD+SE }, /* 01 0 0101: lwax */ | |
| INVALID, /* 01 0 0110 */ | |
| INVALID, /* 01 0 0111 */ | |
| { 4, LD+M+HARD+SX }, /* 01 0 1000: lswx */ | |
| { 4, LD+M+HARD }, /* 01 0 1001: lswi */ | |
| { 4, ST+M+HARD+SX }, /* 01 0 1010: stswx */ | |
| { 4, ST+M+HARD }, /* 01 0 1011: stswi */ | |
| INVALID, /* 01 0 1100 */ | |
| { 8, LD+U }, /* 01 0 1101: ldu */ | |
| INVALID, /* 01 0 1110 */ | |
| { 8, ST+U }, /* 01 0 1111: stdu */ | |
| { 8, LD+U }, /* 01 1 0000: ldux */ | |
| INVALID, /* 01 1 0001 */ | |
| { 8, ST+U }, /* 01 1 0010: stdux */ | |
| INVALID, /* 01 1 0011 */ | |
| INVALID, /* 01 1 0100 */ | |
| { 4, LD+SE+U }, /* 01 1 0101: lwaux */ | |
| INVALID, /* 01 1 0110 */ | |
| INVALID, /* 01 1 0111 */ | |
| INVALID, /* 01 1 1000 */ | |
| INVALID, /* 01 1 1001 */ | |
| INVALID, /* 01 1 1010 */ | |
| INVALID, /* 01 1 1011 */ | |
| INVALID, /* 01 1 1100 */ | |
| INVALID, /* 01 1 1101 */ | |
| INVALID, /* 01 1 1110 */ | |
| INVALID, /* 01 1 1111 */ | |
| INVALID, /* 10 0 0000 */ | |
| INVALID, /* 10 0 0001 */ | |
| INVALID, /* 10 0 0010: stwcx. */ | |
| INVALID, /* 10 0 0011 */ | |
| INVALID, /* 10 0 0100 */ | |
| INVALID, /* 10 0 0101 */ | |
| INVALID, /* 10 0 0110 */ | |
| INVALID, /* 10 0 0111 */ | |
| { 4, LD+SW }, /* 10 0 1000: lwbrx */ | |
| INVALID, /* 10 0 1001 */ | |
| { 4, ST+SW }, /* 10 0 1010: stwbrx */ | |
| INVALID, /* 10 0 1011 */ | |
| { 2, LD+SW }, /* 10 0 1100: lhbrx */ | |
| { 4, LD+SE }, /* 10 0 1101 lwa */ | |
| { 2, ST+SW }, /* 10 0 1110: sthbrx */ | |
| { 16, ST }, /* 10 0 1111: stq */ | |
| INVALID, /* 10 1 0000 */ | |
| INVALID, /* 10 1 0001 */ | |
| INVALID, /* 10 1 0010 */ | |
| INVALID, /* 10 1 0011 */ | |
| INVALID, /* 10 1 0100 */ | |
| INVALID, /* 10 1 0101 */ | |
| INVALID, /* 10 1 0110 */ | |
| INVALID, /* 10 1 0111 */ | |
| INVALID, /* 10 1 1000 */ | |
| INVALID, /* 10 1 1001 */ | |
| INVALID, /* 10 1 1010 */ | |
| INVALID, /* 10 1 1011 */ | |
| INVALID, /* 10 1 1100 */ | |
| INVALID, /* 10 1 1101 */ | |
| INVALID, /* 10 1 1110 */ | |
| { 0, ST+HARD }, /* 10 1 1111: dcbz */ | |
| { 4, LD }, /* 11 0 0000: lwzx */ | |
| INVALID, /* 11 0 0001 */ | |
| { 4, ST }, /* 11 0 0010: stwx */ | |
| INVALID, /* 11 0 0011 */ | |
| { 2, LD }, /* 11 0 0100: lhzx */ | |
| { 2, LD+SE }, /* 11 0 0101: lhax */ | |
| { 2, ST }, /* 11 0 0110: sthx */ | |
| INVALID, /* 11 0 0111 */ | |
| { 4, LD+F+S }, /* 11 0 1000: lfsx */ | |
| { 8, LD+F }, /* 11 0 1001: lfdx */ | |
| { 4, ST+F+S }, /* 11 0 1010: stfsx */ | |
| { 8, ST+F }, /* 11 0 1011: stfdx */ | |
| { 16, LD+F }, /* 11 0 1100: lfdpx */ | |
| { 4, LD+F+SE }, /* 11 0 1101: lfiwax */ | |
| { 16, ST+F }, /* 11 0 1110: stfdpx */ | |
| { 4, ST+F }, /* 11 0 1111: stfiwx */ | |
| { 4, LD+U }, /* 11 1 0000: lwzux */ | |
| INVALID, /* 11 1 0001 */ | |
| { 4, ST+U }, /* 11 1 0010: stwux */ | |
| INVALID, /* 11 1 0011 */ | |
| { 2, LD+U }, /* 11 1 0100: lhzux */ | |
| { 2, LD+SE+U }, /* 11 1 0101: lhaux */ | |
| { 2, ST+U }, /* 11 1 0110: sthux */ | |
| INVALID, /* 11 1 0111 */ | |
| { 4, LD+F+S+U }, /* 11 1 1000: lfsux */ | |
| { 8, LD+F+U }, /* 11 1 1001: lfdux */ | |
| { 4, ST+F+S+U }, /* 11 1 1010: stfsux */ | |
| { 8, ST+F+U }, /* 11 1 1011: stfdux */ | |
| INVALID, /* 11 1 1100 */ | |
| { 4, LD+F }, /* 11 1 1101: lfiwzx */ | |
| INVALID, /* 11 1 1110 */ | |
| INVALID, /* 11 1 1111 */ | |
| }; | |
| /* | |
| * The dcbz (data cache block zero) instruction | |
| * gives an alignment fault if used on non-cacheable | |
| * memory. We handle the fault mainly for the | |
| * case when we are running with the cache disabled | |
| * for debugging. | |
| */ | |
| static int emulate_dcbz(struct pt_regs *regs, unsigned char __user *addr) | |
| { | |
| long __user *p; | |
| int i, size; | |
| #ifdef __powerpc64__ | |
| size = ppc64_caches.dline_size; | |
| #else | |
| size = L1_CACHE_BYTES; | |
| #endif | |
| p = (long __user *) (regs->dar & -size); | |
| if (user_mode(regs) && !access_ok(VERIFY_WRITE, p, size)) | |
| return -EFAULT; | |
| for (i = 0; i < size / sizeof(long); ++i) | |
| if (__put_user_inatomic(0, p+i)) | |
| return -EFAULT; | |
| return 1; | |
| } | |
| /* | |
| * Emulate load & store multiple instructions | |
| * On 64-bit machines, these instructions only affect/use the | |
| * bottom 4 bytes of each register, and the loads clear the | |
| * top 4 bytes of the affected register. | |
| */ | |
| #ifdef __BIG_ENDIAN__ | |
| #ifdef CONFIG_PPC64 | |
| #define REG_BYTE(rp, i) *((u8 *)((rp) + ((i) >> 2)) + ((i) & 3) + 4) | |
| #else | |
| #define REG_BYTE(rp, i) *((u8 *)(rp) + (i)) | |
| #endif | |
| #endif | |
| #ifdef __LITTLE_ENDIAN__ | |
| #define REG_BYTE(rp, i) (*(((u8 *)((rp) + ((i)>>2)) + ((i)&3)))) | |
| #endif | |
| #define SWIZ_PTR(p) ((unsigned char __user *)((p) ^ swiz)) | |
| static int emulate_multiple(struct pt_regs *regs, unsigned char __user *addr, | |
| unsigned int reg, unsigned int nb, | |
| unsigned int flags, unsigned int instr, | |
| unsigned long swiz) | |
| { | |
| unsigned long *rptr; | |
| unsigned int nb0, i, bswiz; | |
| unsigned long p; | |
| /* | |
| * We do not try to emulate 8 bytes multiple as they aren't really | |
| * available in our operating environments and we don't try to | |
| * emulate multiples operations in kernel land as they should never | |
| * be used/generated there at least not on unaligned boundaries | |
| */ | |
| if (unlikely((nb > 4) || !user_mode(regs))) | |
| return 0; | |
| /* lmw, stmw, lswi/x, stswi/x */ | |
| nb0 = 0; | |
| if (flags & HARD) { | |
| if (flags & SX) { | |
| nb = regs->xer & 127; | |
| if (nb == 0) | |
| return 1; | |
| } else { | |
| unsigned long pc = regs->nip ^ (swiz & 4); | |
| if (__get_user_inatomic(instr, | |
| (unsigned int __user *)pc)) | |
| return -EFAULT; | |
| if (swiz == 0 && (flags & SW)) | |
| instr = cpu_to_le32(instr); | |
| nb = (instr >> 11) & 0x1f; | |
| if (nb == 0) | |
| nb = 32; | |
| } | |
| if (nb + reg * 4 > 128) { | |
| nb0 = nb + reg * 4 - 128; | |
| nb = 128 - reg * 4; | |
| } | |
| #ifdef __LITTLE_ENDIAN__ | |
| /* | |
| * String instructions are endian neutral but the code | |
| * below is not. Force byte swapping on so that the | |
| * effects of swizzling are undone in the load/store | |
| * loops below. | |
| */ | |
| flags ^= SW; | |
| #endif | |
| } else { | |
| /* lwm, stmw */ | |
| nb = (32 - reg) * 4; | |
| } | |
| if (!access_ok((flags & ST ? VERIFY_WRITE: VERIFY_READ), addr, nb+nb0)) | |
| return -EFAULT; /* bad address */ | |
| rptr = ®s->gpr[reg]; | |
| p = (unsigned long) addr; | |
| bswiz = (flags & SW)? 3: 0; | |
| if (!(flags & ST)) { | |
| /* | |
| * This zeroes the top 4 bytes of the affected registers | |
| * in 64-bit mode, and also zeroes out any remaining | |
| * bytes of the last register for lsw*. | |
| */ | |
| memset(rptr, 0, ((nb + 3) / 4) * sizeof(unsigned long)); | |
| if (nb0 > 0) | |
| memset(®s->gpr[0], 0, | |
| ((nb0 + 3) / 4) * sizeof(unsigned long)); | |
| for (i = 0; i < nb; ++i, ++p) | |
| if (__get_user_inatomic(REG_BYTE(rptr, i ^ bswiz), | |
| SWIZ_PTR(p))) | |
| return -EFAULT; | |
| if (nb0 > 0) { | |
| rptr = ®s->gpr[0]; | |
| addr += nb; | |
| for (i = 0; i < nb0; ++i, ++p) | |
| if (__get_user_inatomic(REG_BYTE(rptr, | |
| i ^ bswiz), | |
| SWIZ_PTR(p))) | |
| return -EFAULT; | |
| } | |
| } else { | |
| for (i = 0; i < nb; ++i, ++p) | |
| if (__put_user_inatomic(REG_BYTE(rptr, i ^ bswiz), | |
| SWIZ_PTR(p))) | |
| return -EFAULT; | |
| if (nb0 > 0) { | |
| rptr = ®s->gpr[0]; | |
| addr += nb; | |
| for (i = 0; i < nb0; ++i, ++p) | |
| if (__put_user_inatomic(REG_BYTE(rptr, | |
| i ^ bswiz), | |
| SWIZ_PTR(p))) | |
| return -EFAULT; | |
| } | |
| } | |
| return 1; | |
| } | |
| /* | |
| * Emulate floating-point pair loads and stores. | |
| * Only POWER6 has these instructions, and it does true little-endian, | |
| * so we don't need the address swizzling. | |
| */ | |
| static int emulate_fp_pair(unsigned char __user *addr, unsigned int reg, | |
| unsigned int flags) | |
| { | |
| char *ptr0 = (char *) ¤t->thread.TS_FPR(reg); | |
| char *ptr1 = (char *) ¤t->thread.TS_FPR(reg+1); | |
| int i, ret, sw = 0; | |
| if (reg & 1) | |
| return 0; /* invalid form: FRS/FRT must be even */ | |
| if (flags & SW) | |
| sw = 7; | |
| ret = 0; | |
| for (i = 0; i < 8; ++i) { | |
| if (!(flags & ST)) { | |
| ret |= __get_user(ptr0[i^sw], addr + i); | |
| ret |= __get_user(ptr1[i^sw], addr + i + 8); | |
| } else { | |
| ret |= __put_user(ptr0[i^sw], addr + i); | |
| ret |= __put_user(ptr1[i^sw], addr + i + 8); | |
| } | |
| } | |
| if (ret) | |
| return -EFAULT; | |
| return 1; /* exception handled and fixed up */ | |
| } | |
| #ifdef CONFIG_PPC64 | |
| static int emulate_lq_stq(struct pt_regs *regs, unsigned char __user *addr, | |
| unsigned int reg, unsigned int flags) | |
| { | |
| char *ptr0 = (char *)®s->gpr[reg]; | |
| char *ptr1 = (char *)®s->gpr[reg+1]; | |
| int i, ret, sw = 0; | |
| if (reg & 1) | |
| return 0; /* invalid form: GPR must be even */ | |
| if (flags & SW) | |
| sw = 7; | |
| ret = 0; | |
| for (i = 0; i < 8; ++i) { | |
| if (!(flags & ST)) { | |
| ret |= __get_user(ptr0[i^sw], addr + i); | |
| ret |= __get_user(ptr1[i^sw], addr + i + 8); | |
| } else { | |
| ret |= __put_user(ptr0[i^sw], addr + i); | |
| ret |= __put_user(ptr1[i^sw], addr + i + 8); | |
| } | |
| } | |
| if (ret) | |
| return -EFAULT; | |
| return 1; /* exception handled and fixed up */ | |
| } | |
| #endif /* CONFIG_PPC64 */ | |
| #ifdef CONFIG_SPE | |
| static struct aligninfo spe_aligninfo[32] = { | |
| { 8, LD+E8 }, /* 0 00 00: evldd[x] */ | |
| { 8, LD+E4 }, /* 0 00 01: evldw[x] */ | |
| { 8, LD }, /* 0 00 10: evldh[x] */ | |
| INVALID, /* 0 00 11 */ | |
| { 2, LD }, /* 0 01 00: evlhhesplat[x] */ | |
| INVALID, /* 0 01 01 */ | |
| { 2, LD }, /* 0 01 10: evlhhousplat[x] */ | |
| { 2, LD+SE }, /* 0 01 11: evlhhossplat[x] */ | |
| { 4, LD }, /* 0 10 00: evlwhe[x] */ | |
| INVALID, /* 0 10 01 */ | |
| { 4, LD }, /* 0 10 10: evlwhou[x] */ | |
| { 4, LD+SE }, /* 0 10 11: evlwhos[x] */ | |
| { 4, LD+E4 }, /* 0 11 00: evlwwsplat[x] */ | |
| INVALID, /* 0 11 01 */ | |
| { 4, LD }, /* 0 11 10: evlwhsplat[x] */ | |
| INVALID, /* 0 11 11 */ | |
| { 8, ST+E8 }, /* 1 00 00: evstdd[x] */ | |
| { 8, ST+E4 }, /* 1 00 01: evstdw[x] */ | |
| { 8, ST }, /* 1 00 10: evstdh[x] */ | |
| INVALID, /* 1 00 11 */ | |
| INVALID, /* 1 01 00 */ | |
| INVALID, /* 1 01 01 */ | |
| INVALID, /* 1 01 10 */ | |
| INVALID, /* 1 01 11 */ | |
| { 4, ST }, /* 1 10 00: evstwhe[x] */ | |
| INVALID, /* 1 10 01 */ | |
| { 4, ST }, /* 1 10 10: evstwho[x] */ | |
| INVALID, /* 1 10 11 */ | |
| { 4, ST+E4 }, /* 1 11 00: evstwwe[x] */ | |
| INVALID, /* 1 11 01 */ | |
| { 4, ST+E4 }, /* 1 11 10: evstwwo[x] */ | |
| INVALID, /* 1 11 11 */ | |
| }; | |
| #define EVLDD 0x00 | |
| #define EVLDW 0x01 | |
| #define EVLDH 0x02 | |
| #define EVLHHESPLAT 0x04 | |
| #define EVLHHOUSPLAT 0x06 | |
| #define EVLHHOSSPLAT 0x07 | |
| #define EVLWHE 0x08 | |
| #define EVLWHOU 0x0A | |
| #define EVLWHOS 0x0B | |
| #define EVLWWSPLAT 0x0C | |
| #define EVLWHSPLAT 0x0E | |
| #define EVSTDD 0x10 | |
| #define EVSTDW 0x11 | |
| #define EVSTDH 0x12 | |
| #define EVSTWHE 0x18 | |
| #define EVSTWHO 0x1A | |
| #define EVSTWWE 0x1C | |
| #define EVSTWWO 0x1E | |
| /* | |
| * Emulate SPE loads and stores. | |
| * Only Book-E has these instructions, and it does true little-endian, | |
| * so we don't need the address swizzling. | |
| */ | |
| static int emulate_spe(struct pt_regs *regs, unsigned int reg, | |
| unsigned int instr) | |
| { | |
| int ret; | |
| union { | |
| u64 ll; | |
| u32 w[2]; | |
| u16 h[4]; | |
| u8 v[8]; | |
| } data, temp; | |
| unsigned char __user *p, *addr; | |
| unsigned long *evr = ¤t->thread.evr[reg]; | |
| unsigned int nb, flags; | |
| instr = (instr >> 1) & 0x1f; | |
| /* DAR has the operand effective address */ | |
| addr = (unsigned char __user *)regs->dar; | |
| nb = spe_aligninfo[instr].len; | |
| flags = spe_aligninfo[instr].flags; | |
| /* Verify the address of the operand */ | |
| if (unlikely(user_mode(regs) && | |
| !access_ok((flags & ST ? VERIFY_WRITE : VERIFY_READ), | |
| addr, nb))) | |
| return -EFAULT; | |
| /* userland only */ | |
| if (unlikely(!user_mode(regs))) | |
| return 0; | |
| flush_spe_to_thread(current); | |
| /* If we are loading, get the data from user space, else | |
| * get it from register values | |
| */ | |
| if (flags & ST) { | |
| data.ll = 0; | |
| switch (instr) { | |
| case EVSTDD: | |
| case EVSTDW: | |
| case EVSTDH: | |
| data.w[0] = *evr; | |
| data.w[1] = regs->gpr[reg]; | |
| break; | |
| case EVSTWHE: | |
| data.h[2] = *evr >> 16; | |
| data.h[3] = regs->gpr[reg] >> 16; | |
| break; | |
| case EVSTWHO: | |
| data.h[2] = *evr & 0xffff; | |
| data.h[3] = regs->gpr[reg] & 0xffff; | |
| break; | |
| case EVSTWWE: | |
| data.w[1] = *evr; | |
| break; | |
| case EVSTWWO: | |
| data.w[1] = regs->gpr[reg]; | |
| break; | |
| default: | |
| return -EINVAL; | |
| } | |
| } else { | |
| temp.ll = data.ll = 0; | |
| ret = 0; | |
| p = addr; | |
| switch (nb) { | |
| case 8: | |
| ret |= __get_user_inatomic(temp.v[0], p++); | |
| ret |= __get_user_inatomic(temp.v[1], p++); | |
| ret |= __get_user_inatomic(temp.v[2], p++); | |
| ret |= __get_user_inatomic(temp.v[3], p++); | |
| case 4: | |
| ret |= __get_user_inatomic(temp.v[4], p++); | |
| ret |= __get_user_inatomic(temp.v[5], p++); | |
| case 2: | |
| ret |= __get_user_inatomic(temp.v[6], p++); | |
| ret |= __get_user_inatomic(temp.v[7], p++); | |
| if (unlikely(ret)) | |
| return -EFAULT; | |
| } | |
| switch (instr) { | |
| case EVLDD: | |
| case EVLDW: | |
| case EVLDH: | |
| data.ll = temp.ll; | |
| break; | |
| case EVLHHESPLAT: | |
| data.h[0] = temp.h[3]; | |
| data.h[2] = temp.h[3]; | |
| break; | |
| case EVLHHOUSPLAT: | |
| case EVLHHOSSPLAT: | |
| data.h[1] = temp.h[3]; | |
| data.h[3] = temp.h[3]; | |
| break; | |
| case EVLWHE: | |
| data.h[0] = temp.h[2]; | |
| data.h[2] = temp.h[3]; | |
| break; | |
| case EVLWHOU: | |
| case EVLWHOS: | |
| data.h[1] = temp.h[2]; | |
| data.h[3] = temp.h[3]; | |
| break; | |
| case EVLWWSPLAT: | |
| data.w[0] = temp.w[1]; | |
| data.w[1] = temp.w[1]; | |
| break; | |
| case EVLWHSPLAT: | |
| data.h[0] = temp.h[2]; | |
| data.h[1] = temp.h[2]; | |
| data.h[2] = temp.h[3]; | |
| data.h[3] = temp.h[3]; | |
| break; | |
| default: | |
| return -EINVAL; | |
| } | |
| } | |
| if (flags & SW) { | |
| switch (flags & 0xf0) { | |
| case E8: | |
| data.ll = swab64(data.ll); | |
| break; | |
| case E4: | |
| data.w[0] = swab32(data.w[0]); | |
| data.w[1] = swab32(data.w[1]); | |
| break; | |
| /* Its half word endian */ | |
| default: | |
| data.h[0] = swab16(data.h[0]); | |
| data.h[1] = swab16(data.h[1]); | |
| data.h[2] = swab16(data.h[2]); | |
| data.h[3] = swab16(data.h[3]); | |
| break; | |
| } | |
| } | |
| if (flags & SE) { | |
| data.w[0] = (s16)data.h[1]; | |
| data.w[1] = (s16)data.h[3]; | |
| } | |
| /* Store result to memory or update registers */ | |
| if (flags & ST) { | |
| ret = 0; | |
| p = addr; | |
| switch (nb) { | |
| case 8: | |
| ret |= __put_user_inatomic(data.v[0], p++); | |
| ret |= __put_user_inatomic(data.v[1], p++); | |
| ret |= __put_user_inatomic(data.v[2], p++); | |
| ret |= __put_user_inatomic(data.v[3], p++); | |
| case 4: | |
| ret |= __put_user_inatomic(data.v[4], p++); | |
| ret |= __put_user_inatomic(data.v[5], p++); | |
| case 2: | |
| ret |= __put_user_inatomic(data.v[6], p++); | |
| ret |= __put_user_inatomic(data.v[7], p++); | |
| } | |
| if (unlikely(ret)) | |
| return -EFAULT; | |
| } else { | |
| *evr = data.w[0]; | |
| regs->gpr[reg] = data.w[1]; | |
| } | |
| return 1; | |
| } | |
| #endif /* CONFIG_SPE */ | |
| #ifdef CONFIG_VSX | |
| /* | |
| * Emulate VSX instructions... | |
| */ | |
| static int emulate_vsx(unsigned char __user *addr, unsigned int reg, | |
| unsigned int areg, struct pt_regs *regs, | |
| unsigned int flags, unsigned int length, | |
| unsigned int elsize) | |
| { | |
| char *ptr; | |
| unsigned long *lptr; | |
| int ret = 0; | |
| int sw = 0; | |
| int i, j; | |
| /* userland only */ | |
| if (unlikely(!user_mode(regs))) | |
| return 0; | |
| flush_vsx_to_thread(current); | |
| if (reg < 32) | |
| ptr = (char *) ¤t->thread.fp_state.fpr[reg][0]; | |
| else | |
| ptr = (char *) ¤t->thread.vr_state.vr[reg - 32]; | |
| lptr = (unsigned long *) ptr; | |
| #ifdef __LITTLE_ENDIAN__ | |
| if (flags & SW) { | |
| elsize = length; | |
| sw = length-1; | |
| } else { | |
| /* | |
| * The elements are BE ordered, even in LE mode, so process | |
| * them in reverse order. | |
| */ | |
| addr += length - elsize; | |
| /* 8 byte memory accesses go in the top 8 bytes of the VR */ | |
| if (length == 8) | |
| ptr += 8; | |
| } | |
| #else | |
| if (flags & SW) | |
| sw = elsize-1; | |
| #endif | |
| for (j = 0; j < length; j += elsize) { | |
| for (i = 0; i < elsize; ++i) { | |
| if (flags & ST) | |
| ret |= __put_user(ptr[i^sw], addr + i); | |
| else | |
| ret |= __get_user(ptr[i^sw], addr + i); | |
| } | |
| ptr += elsize; | |
| #ifdef __LITTLE_ENDIAN__ | |
| addr -= elsize; | |
| #else | |
| addr += elsize; | |
| #endif | |
| } | |
| #ifdef __BIG_ENDIAN__ | |
| #define VSX_HI 0 | |
| #define VSX_LO 1 | |
| #else | |
| #define VSX_HI 1 | |
| #define VSX_LO 0 | |
| #endif | |
| if (!ret) { | |
| if (flags & U) | |
| regs->gpr[areg] = regs->dar; | |
| /* Splat load copies the same data to top and bottom 8 bytes */ | |
| if (flags & SPLT) | |
| lptr[VSX_LO] = lptr[VSX_HI]; | |
| /* For 8 byte loads, zero the low 8 bytes */ | |
| else if (!(flags & ST) && (8 == length)) | |
| lptr[VSX_LO] = 0; | |
| } else | |
| return -EFAULT; | |
| return 1; | |
| } | |
| #endif | |
| /* | |
| * Called on alignment exception. Attempts to fixup | |
| * | |
| * Return 1 on success | |
| * Return 0 if unable to handle the interrupt | |
| * Return -EFAULT if data address is bad | |
| */ | |
| int fix_alignment(struct pt_regs *regs) | |
| { | |
| unsigned int instr, nb, flags, instruction = 0; | |
| unsigned int reg, areg; | |
| unsigned int dsisr; | |
| unsigned char __user *addr; | |
| unsigned long p, swiz; | |
| int ret, i; | |
| union data { | |
| u64 ll; | |
| double dd; | |
| unsigned char v[8]; | |
| struct { | |
| #ifdef __LITTLE_ENDIAN__ | |
| int low32; | |
| unsigned hi32; | |
| #else | |
| unsigned hi32; | |
| int low32; | |
| #endif | |
| } x32; | |
| struct { | |
| #ifdef __LITTLE_ENDIAN__ | |
| short low16; | |
| unsigned char hi48[6]; | |
| #else | |
| unsigned char hi48[6]; | |
| short low16; | |
| #endif | |
| } x16; | |
| } data; | |
| /* | |
| * We require a complete register set, if not, then our assembly | |
| * is broken | |
| */ | |
| CHECK_FULL_REGS(regs); | |
| dsisr = regs->dsisr; | |
| /* Some processors don't provide us with a DSISR we can use here, | |
| * let's make one up from the instruction | |
| */ | |
| if (cpu_has_feature(CPU_FTR_NODSISRALIGN)) { | |
| unsigned long pc = regs->nip; | |
| if (cpu_has_feature(CPU_FTR_PPC_LE) && (regs->msr & MSR_LE)) | |
| pc ^= 4; | |
| if (unlikely(__get_user_inatomic(instr, | |
| (unsigned int __user *)pc))) | |
| return -EFAULT; | |
| if (cpu_has_feature(CPU_FTR_REAL_LE) && (regs->msr & MSR_LE)) | |
| instr = cpu_to_le32(instr); | |
| dsisr = make_dsisr(instr); | |
| instruction = instr; | |
| } | |
| /* extract the operation and registers from the dsisr */ | |
| reg = (dsisr >> 5) & 0x1f; /* source/dest register */ | |
| areg = dsisr & 0x1f; /* register to update */ | |
| #ifdef CONFIG_SPE | |
| if ((instr >> 26) == 0x4) { | |
| PPC_WARN_ALIGNMENT(spe, regs); | |
| return emulate_spe(regs, reg, instr); | |
| } | |
| #endif | |
| instr = (dsisr >> 10) & 0x7f; | |
| instr |= (dsisr >> 13) & 0x60; | |
| /* Lookup the operation in our table */ | |
| nb = aligninfo[instr].len; | |
| flags = aligninfo[instr].flags; | |
| /* ldbrx/stdbrx overlap lfs/stfs in the DSISR unfortunately */ | |
| if (IS_XFORM(instruction) && ((instruction >> 1) & 0x3ff) == 532) { | |
| nb = 8; | |
| flags = LD+SW; | |
| } else if (IS_XFORM(instruction) && | |
| ((instruction >> 1) & 0x3ff) == 660) { | |
| nb = 8; | |
| flags = ST+SW; | |
| } | |
| /* Byteswap little endian loads and stores */ | |
| swiz = 0; | |
| if ((regs->msr & MSR_LE) != (MSR_KERNEL & MSR_LE)) { | |
| flags ^= SW; | |
| #ifdef __BIG_ENDIAN__ | |
| /* | |
| * So-called "PowerPC little endian" mode works by | |
| * swizzling addresses rather than by actually doing | |
| * any byte-swapping. To emulate this, we XOR each | |
| * byte address with 7. We also byte-swap, because | |
| * the processor's address swizzling depends on the | |
| * operand size (it xors the address with 7 for bytes, | |
| * 6 for halfwords, 4 for words, 0 for doublewords) but | |
| * we will xor with 7 and load/store each byte separately. | |
| */ | |
| if (cpu_has_feature(CPU_FTR_PPC_LE)) | |
| swiz = 7; | |
| #endif | |
| } | |
| /* DAR has the operand effective address */ | |
| addr = (unsigned char __user *)regs->dar; | |
| #ifdef CONFIG_VSX | |
| if ((instruction & 0xfc00003e) == 0x7c000018) { | |
| unsigned int elsize; | |
| /* Additional register addressing bit (64 VSX vs 32 FPR/GPR) */ | |
| reg |= (instruction & 0x1) << 5; | |
| /* Simple inline decoder instead of a table */ | |
| /* VSX has only 8 and 16 byte memory accesses */ | |
| nb = 8; | |
| if (instruction & 0x200) | |
| nb = 16; | |
| /* Vector stores in little-endian mode swap individual | |
| elements, so process them separately */ | |
| elsize = 4; | |
| if (instruction & 0x80) | |
| elsize = 8; | |
| flags = 0; | |
| if ((regs->msr & MSR_LE) != (MSR_KERNEL & MSR_LE)) | |
| flags |= SW; | |
| if (instruction & 0x100) | |
| flags |= ST; | |
| if (instruction & 0x040) | |
| flags |= U; | |
| /* splat load needs a special decoder */ | |
| if ((instruction & 0x400) == 0){ | |
| flags |= SPLT; | |
| nb = 8; | |
| } | |
| PPC_WARN_ALIGNMENT(vsx, regs); | |
| return emulate_vsx(addr, reg, areg, regs, flags, nb, elsize); | |
| } | |
| #endif | |
| /* A size of 0 indicates an instruction we don't support, with | |
| * the exception of DCBZ which is handled as a special case here | |
| */ | |
| if (instr == DCBZ) { | |
| PPC_WARN_ALIGNMENT(dcbz, regs); | |
| return emulate_dcbz(regs, addr); | |
| } | |
| if (unlikely(nb == 0)) | |
| return 0; | |
| /* Load/Store Multiple instructions are handled in their own | |
| * function | |
| */ | |
| if (flags & M) { | |
| PPC_WARN_ALIGNMENT(multiple, regs); | |
| return emulate_multiple(regs, addr, reg, nb, | |
| flags, instr, swiz); | |
| } | |
| /* Verify the address of the operand */ | |
| if (unlikely(user_mode(regs) && | |
| !access_ok((flags & ST ? VERIFY_WRITE : VERIFY_READ), | |
| addr, nb))) | |
| return -EFAULT; | |
| /* Force the fprs into the save area so we can reference them */ | |
| if (flags & F) { | |
| /* userland only */ | |
| if (unlikely(!user_mode(regs))) | |
| return 0; | |
| flush_fp_to_thread(current); | |
| } | |
| if (nb == 16) { | |
| if (flags & F) { | |
| /* Special case for 16-byte FP loads and stores */ | |
| PPC_WARN_ALIGNMENT(fp_pair, regs); | |
| return emulate_fp_pair(addr, reg, flags); | |
| } else { | |
| #ifdef CONFIG_PPC64 | |
| /* Special case for 16-byte loads and stores */ | |
| PPC_WARN_ALIGNMENT(lq_stq, regs); | |
| return emulate_lq_stq(regs, addr, reg, flags); | |
| #else | |
| return 0; | |
| #endif | |
| } | |
| } | |
| PPC_WARN_ALIGNMENT(unaligned, regs); | |
| /* If we are loading, get the data from user space, else | |
| * get it from register values | |
| */ | |
| if (!(flags & ST)) { | |
| unsigned int start = 0; | |
| switch (nb) { | |
| case 4: | |
| start = offsetof(union data, x32.low32); | |
| break; | |
| case 2: | |
| start = offsetof(union data, x16.low16); | |
| break; | |
| } | |
| data.ll = 0; | |
| ret = 0; | |
| p = (unsigned long)addr; | |
| for (i = 0; i < nb; i++) | |
| ret |= __get_user_inatomic(data.v[start + i], | |
| SWIZ_PTR(p++)); | |
| if (unlikely(ret)) | |
| return -EFAULT; | |
| } else if (flags & F) { | |
| data.ll = current->thread.TS_FPR(reg); | |
| if (flags & S) { | |
| /* Single-precision FP store requires conversion... */ | |
| #ifdef CONFIG_PPC_FPU | |
| preempt_disable(); | |
| enable_kernel_fp(); | |
| cvt_df(&data.dd, (float *)&data.x32.low32); | |
| preempt_enable(); | |
| #else | |
| return 0; | |
| #endif | |
| } | |
| } else | |
| data.ll = regs->gpr[reg]; | |
| if (flags & SW) { | |
| switch (nb) { | |
| case 8: | |
| data.ll = swab64(data.ll); | |
| break; | |
| case 4: | |
| data.x32.low32 = swab32(data.x32.low32); | |
| break; | |
| case 2: | |
| data.x16.low16 = swab16(data.x16.low16); | |
| break; | |
| } | |
| } | |
| /* Perform other misc operations like sign extension | |
| * or floating point single precision conversion | |
| */ | |
| switch (flags & ~(U|SW)) { | |
| case LD+SE: /* sign extending integer loads */ | |
| case LD+F+SE: /* sign extend for lfiwax */ | |
| if ( nb == 2 ) | |
| data.ll = data.x16.low16; | |
| else /* nb must be 4 */ | |
| data.ll = data.x32.low32; | |
| break; | |
| /* Single-precision FP load requires conversion... */ | |
| case LD+F+S: | |
| #ifdef CONFIG_PPC_FPU | |
| preempt_disable(); | |
| enable_kernel_fp(); | |
| cvt_fd((float *)&data.x32.low32, &data.dd); | |
| preempt_enable(); | |
| #else | |
| return 0; | |
| #endif | |
| break; | |
| } | |
| /* Store result to memory or update registers */ | |
| if (flags & ST) { | |
| unsigned int start = 0; | |
| switch (nb) { | |
| case 4: | |
| start = offsetof(union data, x32.low32); | |
| break; | |
| case 2: | |
| start = offsetof(union data, x16.low16); | |
| break; | |
| } | |
| ret = 0; | |
| p = (unsigned long)addr; | |
| for (i = 0; i < nb; i++) | |
| ret |= __put_user_inatomic(data.v[start + i], | |
| SWIZ_PTR(p++)); | |
| if (unlikely(ret)) | |
| return -EFAULT; | |
| } else if (flags & F) | |
| current->thread.TS_FPR(reg) = data.ll; | |
| else | |
| regs->gpr[reg] = data.ll; | |
| /* Update RA as needed */ | |
| if (flags & U) | |
| regs->gpr[areg] = regs->dar; | |
| return 1; | |
| } |