| /* | |
| * Common time routines among all ppc machines. | |
| * | |
| * Written by Cort Dougan (cort@cs.nmt.edu) to merge | |
| * Paul Mackerras' version and mine for PReP and Pmac. | |
| * MPC8xx/MBX changes by Dan Malek (dmalek@jlc.net). | |
| * Converted for 64-bit by Mike Corrigan (mikejc@us.ibm.com) | |
| * | |
| * First round of bugfixes by Gabriel Paubert (paubert@iram.es) | |
| * to make clock more stable (2.4.0-test5). The only thing | |
| * that this code assumes is that the timebases have been synchronized | |
| * by firmware on SMP and are never stopped (never do sleep | |
| * on SMP then, nap and doze are OK). | |
| * | |
| * Speeded up do_gettimeofday by getting rid of references to | |
| * xtime (which required locks for consistency). (mikejc@us.ibm.com) | |
| * | |
| * TODO (not necessarily in this file): | |
| * - improve precision and reproducibility of timebase frequency | |
| * measurement at boot time. | |
| * - for astronomical applications: add a new function to get | |
| * non ambiguous timestamps even around leap seconds. This needs | |
| * a new timestamp format and a good name. | |
| * | |
| * 1997-09-10 Updated NTP code according to technical memorandum Jan '96 | |
| * "A Kernel Model for Precision Timekeeping" by Dave Mills | |
| * | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public License | |
| * as published by the Free Software Foundation; either version | |
| * 2 of the License, or (at your option) any later version. | |
| */ | |
| #include <linux/errno.h> | |
| #include <linux/export.h> | |
| #include <linux/sched.h> | |
| #include <linux/kernel.h> | |
| #include <linux/param.h> | |
| #include <linux/string.h> | |
| #include <linux/mm.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/timex.h> | |
| #include <linux/kernel_stat.h> | |
| #include <linux/time.h> | |
| #include <linux/clockchips.h> | |
| #include <linux/init.h> | |
| #include <linux/profile.h> | |
| #include <linux/cpu.h> | |
| #include <linux/security.h> | |
| #include <linux/percpu.h> | |
| #include <linux/rtc.h> | |
| #include <linux/jiffies.h> | |
| #include <linux/posix-timers.h> | |
| #include <linux/irq.h> | |
| #include <linux/delay.h> | |
| #include <linux/irq_work.h> | |
| #include <linux/clk-provider.h> | |
| #include <asm/trace.h> | |
| #include <asm/io.h> | |
| #include <asm/processor.h> | |
| #include <asm/nvram.h> | |
| #include <asm/cache.h> | |
| #include <asm/machdep.h> | |
| #include <asm/uaccess.h> | |
| #include <asm/time.h> | |
| #include <asm/prom.h> | |
| #include <asm/irq.h> | |
| #include <asm/div64.h> | |
| #include <asm/smp.h> | |
| #include <asm/vdso_datapage.h> | |
| #include <asm/firmware.h> | |
| #include <asm/cputime.h> | |
| /* powerpc clocksource/clockevent code */ | |
| #include <linux/clockchips.h> | |
| #include <linux/timekeeper_internal.h> | |
| static cycle_t rtc_read(struct clocksource *); | |
| static struct clocksource clocksource_rtc = { | |
| .name = "rtc", | |
| .rating = 400, | |
| .flags = CLOCK_SOURCE_IS_CONTINUOUS, | |
| .mask = CLOCKSOURCE_MASK(64), | |
| .read = rtc_read, | |
| }; | |
| static cycle_t timebase_read(struct clocksource *); | |
| static struct clocksource clocksource_timebase = { | |
| .name = "timebase", | |
| .rating = 400, | |
| .flags = CLOCK_SOURCE_IS_CONTINUOUS, | |
| .mask = CLOCKSOURCE_MASK(64), | |
| .read = timebase_read, | |
| }; | |
| #define DECREMENTER_MAX 0x7fffffff | |
| static int decrementer_set_next_event(unsigned long evt, | |
| struct clock_event_device *dev); | |
| static int decrementer_shutdown(struct clock_event_device *evt); | |
| struct clock_event_device decrementer_clockevent = { | |
| .name = "decrementer", | |
| .rating = 200, | |
| .irq = 0, | |
| .set_next_event = decrementer_set_next_event, | |
| .set_state_shutdown = decrementer_shutdown, | |
| .tick_resume = decrementer_shutdown, | |
| .features = CLOCK_EVT_FEAT_ONESHOT | | |
| CLOCK_EVT_FEAT_C3STOP, | |
| }; | |
| EXPORT_SYMBOL(decrementer_clockevent); | |
| DEFINE_PER_CPU(u64, decrementers_next_tb); | |
| static DEFINE_PER_CPU(struct clock_event_device, decrementers); | |
| #define XSEC_PER_SEC (1024*1024) | |
| #ifdef CONFIG_PPC64 | |
| #define SCALE_XSEC(xsec, max) (((xsec) * max) / XSEC_PER_SEC) | |
| #else | |
| /* compute ((xsec << 12) * max) >> 32 */ | |
| #define SCALE_XSEC(xsec, max) mulhwu((xsec) << 12, max) | |
| #endif | |
| unsigned long tb_ticks_per_jiffy; | |
| unsigned long tb_ticks_per_usec = 100; /* sane default */ | |
| EXPORT_SYMBOL(tb_ticks_per_usec); | |
| unsigned long tb_ticks_per_sec; | |
| EXPORT_SYMBOL(tb_ticks_per_sec); /* for cputime_t conversions */ | |
| DEFINE_SPINLOCK(rtc_lock); | |
| EXPORT_SYMBOL_GPL(rtc_lock); | |
| static u64 tb_to_ns_scale __read_mostly; | |
| static unsigned tb_to_ns_shift __read_mostly; | |
| static u64 boot_tb __read_mostly; | |
| extern struct timezone sys_tz; | |
| static long timezone_offset; | |
| unsigned long ppc_proc_freq; | |
| EXPORT_SYMBOL_GPL(ppc_proc_freq); | |
| unsigned long ppc_tb_freq; | |
| EXPORT_SYMBOL_GPL(ppc_tb_freq); | |
| #ifdef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE | |
| /* | |
| * Factors for converting from cputime_t (timebase ticks) to | |
| * jiffies, microseconds, seconds, and clock_t (1/USER_HZ seconds). | |
| * These are all stored as 0.64 fixed-point binary fractions. | |
| */ | |
| u64 __cputime_jiffies_factor; | |
| EXPORT_SYMBOL(__cputime_jiffies_factor); | |
| u64 __cputime_usec_factor; | |
| EXPORT_SYMBOL(__cputime_usec_factor); | |
| u64 __cputime_sec_factor; | |
| EXPORT_SYMBOL(__cputime_sec_factor); | |
| u64 __cputime_clockt_factor; | |
| EXPORT_SYMBOL(__cputime_clockt_factor); | |
| DEFINE_PER_CPU(unsigned long, cputime_last_delta); | |
| DEFINE_PER_CPU(unsigned long, cputime_scaled_last_delta); | |
| cputime_t cputime_one_jiffy; | |
| void (*dtl_consumer)(struct dtl_entry *, u64); | |
| static void calc_cputime_factors(void) | |
| { | |
| struct div_result res; | |
| div128_by_32(HZ, 0, tb_ticks_per_sec, &res); | |
| __cputime_jiffies_factor = res.result_low; | |
| div128_by_32(1000000, 0, tb_ticks_per_sec, &res); | |
| __cputime_usec_factor = res.result_low; | |
| div128_by_32(1, 0, tb_ticks_per_sec, &res); | |
| __cputime_sec_factor = res.result_low; | |
| div128_by_32(USER_HZ, 0, tb_ticks_per_sec, &res); | |
| __cputime_clockt_factor = res.result_low; | |
| } | |
| /* | |
| * Read the SPURR on systems that have it, otherwise the PURR, | |
| * or if that doesn't exist return the timebase value passed in. | |
| */ | |
| static u64 read_spurr(u64 tb) | |
| { | |
| if (cpu_has_feature(CPU_FTR_SPURR)) | |
| return mfspr(SPRN_SPURR); | |
| if (cpu_has_feature(CPU_FTR_PURR)) | |
| return mfspr(SPRN_PURR); | |
| return tb; | |
| } | |
| #ifdef CONFIG_PPC_SPLPAR | |
| /* | |
| * Scan the dispatch trace log and count up the stolen time. | |
| * Should be called with interrupts disabled. | |
| */ | |
| static u64 scan_dispatch_log(u64 stop_tb) | |
| { | |
| u64 i = local_paca->dtl_ridx; | |
| struct dtl_entry *dtl = local_paca->dtl_curr; | |
| struct dtl_entry *dtl_end = local_paca->dispatch_log_end; | |
| struct lppaca *vpa = local_paca->lppaca_ptr; | |
| u64 tb_delta; | |
| u64 stolen = 0; | |
| u64 dtb; | |
| if (!dtl) | |
| return 0; | |
| if (i == be64_to_cpu(vpa->dtl_idx)) | |
| return 0; | |
| while (i < be64_to_cpu(vpa->dtl_idx)) { | |
| dtb = be64_to_cpu(dtl->timebase); | |
| tb_delta = be32_to_cpu(dtl->enqueue_to_dispatch_time) + | |
| be32_to_cpu(dtl->ready_to_enqueue_time); | |
| barrier(); | |
| if (i + N_DISPATCH_LOG < be64_to_cpu(vpa->dtl_idx)) { | |
| /* buffer has overflowed */ | |
| i = be64_to_cpu(vpa->dtl_idx) - N_DISPATCH_LOG; | |
| dtl = local_paca->dispatch_log + (i % N_DISPATCH_LOG); | |
| continue; | |
| } | |
| if (dtb > stop_tb) | |
| break; | |
| if (dtl_consumer) | |
| dtl_consumer(dtl, i); | |
| stolen += tb_delta; | |
| ++i; | |
| ++dtl; | |
| if (dtl == dtl_end) | |
| dtl = local_paca->dispatch_log; | |
| } | |
| local_paca->dtl_ridx = i; | |
| local_paca->dtl_curr = dtl; | |
| return stolen; | |
| } | |
| /* | |
| * Accumulate stolen time by scanning the dispatch trace log. | |
| * Called on entry from user mode. | |
| */ | |
| void accumulate_stolen_time(void) | |
| { | |
| u64 sst, ust; | |
| u8 save_soft_enabled = local_paca->soft_enabled; | |
| /* We are called early in the exception entry, before | |
| * soft/hard_enabled are sync'ed to the expected state | |
| * for the exception. We are hard disabled but the PACA | |
| * needs to reflect that so various debug stuff doesn't | |
| * complain | |
| */ | |
| local_paca->soft_enabled = 0; | |
| sst = scan_dispatch_log(local_paca->starttime_user); | |
| ust = scan_dispatch_log(local_paca->starttime); | |
| local_paca->system_time -= sst; | |
| local_paca->user_time -= ust; | |
| local_paca->stolen_time += ust + sst; | |
| local_paca->soft_enabled = save_soft_enabled; | |
| } | |
| static inline u64 calculate_stolen_time(u64 stop_tb) | |
| { | |
| u64 stolen = 0; | |
| if (get_paca()->dtl_ridx != be64_to_cpu(get_lppaca()->dtl_idx)) { | |
| stolen = scan_dispatch_log(stop_tb); | |
| get_paca()->system_time -= stolen; | |
| } | |
| stolen += get_paca()->stolen_time; | |
| get_paca()->stolen_time = 0; | |
| return stolen; | |
| } | |
| #else /* CONFIG_PPC_SPLPAR */ | |
| static inline u64 calculate_stolen_time(u64 stop_tb) | |
| { | |
| return 0; | |
| } | |
| #endif /* CONFIG_PPC_SPLPAR */ | |
| /* | |
| * Account time for a transition between system, hard irq | |
| * or soft irq state. | |
| */ | |
| static u64 vtime_delta(struct task_struct *tsk, | |
| u64 *sys_scaled, u64 *stolen) | |
| { | |
| u64 now, nowscaled, deltascaled; | |
| u64 udelta, delta, user_scaled; | |
| WARN_ON_ONCE(!irqs_disabled()); | |
| now = mftb(); | |
| nowscaled = read_spurr(now); | |
| get_paca()->system_time += now - get_paca()->starttime; | |
| get_paca()->starttime = now; | |
| deltascaled = nowscaled - get_paca()->startspurr; | |
| get_paca()->startspurr = nowscaled; | |
| *stolen = calculate_stolen_time(now); | |
| delta = get_paca()->system_time; | |
| get_paca()->system_time = 0; | |
| udelta = get_paca()->user_time - get_paca()->utime_sspurr; | |
| get_paca()->utime_sspurr = get_paca()->user_time; | |
| /* | |
| * Because we don't read the SPURR on every kernel entry/exit, | |
| * deltascaled includes both user and system SPURR ticks. | |
| * Apportion these ticks to system SPURR ticks and user | |
| * SPURR ticks in the same ratio as the system time (delta) | |
| * and user time (udelta) values obtained from the timebase | |
| * over the same interval. The system ticks get accounted here; | |
| * the user ticks get saved up in paca->user_time_scaled to be | |
| * used by account_process_tick. | |
| */ | |
| *sys_scaled = delta; | |
| user_scaled = udelta; | |
| if (deltascaled != delta + udelta) { | |
| if (udelta) { | |
| *sys_scaled = deltascaled * delta / (delta + udelta); | |
| user_scaled = deltascaled - *sys_scaled; | |
| } else { | |
| *sys_scaled = deltascaled; | |
| } | |
| } | |
| get_paca()->user_time_scaled += user_scaled; | |
| return delta; | |
| } | |
| void vtime_account_system(struct task_struct *tsk) | |
| { | |
| u64 delta, sys_scaled, stolen; | |
| delta = vtime_delta(tsk, &sys_scaled, &stolen); | |
| account_system_time(tsk, 0, delta, sys_scaled); | |
| if (stolen) | |
| account_steal_time(stolen); | |
| } | |
| EXPORT_SYMBOL_GPL(vtime_account_system); | |
| void vtime_account_idle(struct task_struct *tsk) | |
| { | |
| u64 delta, sys_scaled, stolen; | |
| delta = vtime_delta(tsk, &sys_scaled, &stolen); | |
| account_idle_time(delta + stolen); | |
| } | |
| /* | |
| * Transfer the user time accumulated in the paca | |
| * by the exception entry and exit code to the generic | |
| * process user time records. | |
| * Must be called with interrupts disabled. | |
| * Assumes that vtime_account_system/idle() has been called | |
| * recently (i.e. since the last entry from usermode) so that | |
| * get_paca()->user_time_scaled is up to date. | |
| */ | |
| void vtime_account_user(struct task_struct *tsk) | |
| { | |
| cputime_t utime, utimescaled; | |
| utime = get_paca()->user_time; | |
| utimescaled = get_paca()->user_time_scaled; | |
| get_paca()->user_time = 0; | |
| get_paca()->user_time_scaled = 0; | |
| get_paca()->utime_sspurr = 0; | |
| account_user_time(tsk, utime, utimescaled); | |
| } | |
| #else /* ! CONFIG_VIRT_CPU_ACCOUNTING_NATIVE */ | |
| #define calc_cputime_factors() | |
| #endif | |
| void __delay(unsigned long loops) | |
| { | |
| unsigned long start; | |
| int diff; | |
| if (__USE_RTC()) { | |
| start = get_rtcl(); | |
| do { | |
| /* the RTCL register wraps at 1000000000 */ | |
| diff = get_rtcl() - start; | |
| if (diff < 0) | |
| diff += 1000000000; | |
| } while (diff < loops); | |
| } else { | |
| start = get_tbl(); | |
| while (get_tbl() - start < loops) | |
| HMT_low(); | |
| HMT_medium(); | |
| } | |
| } | |
| EXPORT_SYMBOL(__delay); | |
| void udelay(unsigned long usecs) | |
| { | |
| __delay(tb_ticks_per_usec * usecs); | |
| } | |
| EXPORT_SYMBOL(udelay); | |
| #ifdef CONFIG_SMP | |
| unsigned long profile_pc(struct pt_regs *regs) | |
| { | |
| unsigned long pc = instruction_pointer(regs); | |
| if (in_lock_functions(pc)) | |
| return regs->link; | |
| return pc; | |
| } | |
| EXPORT_SYMBOL(profile_pc); | |
| #endif | |
| #ifdef CONFIG_IRQ_WORK | |
| /* | |
| * 64-bit uses a byte in the PACA, 32-bit uses a per-cpu variable... | |
| */ | |
| #ifdef CONFIG_PPC64 | |
| static inline unsigned long test_irq_work_pending(void) | |
| { | |
| unsigned long x; | |
| asm volatile("lbz %0,%1(13)" | |
| : "=r" (x) | |
| : "i" (offsetof(struct paca_struct, irq_work_pending))); | |
| return x; | |
| } | |
| static inline void set_irq_work_pending_flag(void) | |
| { | |
| asm volatile("stb %0,%1(13)" : : | |
| "r" (1), | |
| "i" (offsetof(struct paca_struct, irq_work_pending))); | |
| } | |
| static inline void clear_irq_work_pending(void) | |
| { | |
| asm volatile("stb %0,%1(13)" : : | |
| "r" (0), | |
| "i" (offsetof(struct paca_struct, irq_work_pending))); | |
| } | |
| #else /* 32-bit */ | |
| DEFINE_PER_CPU(u8, irq_work_pending); | |
| #define set_irq_work_pending_flag() __this_cpu_write(irq_work_pending, 1) | |
| #define test_irq_work_pending() __this_cpu_read(irq_work_pending) | |
| #define clear_irq_work_pending() __this_cpu_write(irq_work_pending, 0) | |
| #endif /* 32 vs 64 bit */ | |
| void arch_irq_work_raise(void) | |
| { | |
| preempt_disable(); | |
| set_irq_work_pending_flag(); | |
| set_dec(1); | |
| preempt_enable(); | |
| } | |
| #else /* CONFIG_IRQ_WORK */ | |
| #define test_irq_work_pending() 0 | |
| #define clear_irq_work_pending() | |
| #endif /* CONFIG_IRQ_WORK */ | |
| static void __timer_interrupt(void) | |
| { | |
| struct pt_regs *regs = get_irq_regs(); | |
| u64 *next_tb = this_cpu_ptr(&decrementers_next_tb); | |
| struct clock_event_device *evt = this_cpu_ptr(&decrementers); | |
| u64 now; | |
| trace_timer_interrupt_entry(regs); | |
| if (test_irq_work_pending()) { | |
| clear_irq_work_pending(); | |
| irq_work_run(); | |
| } | |
| now = get_tb_or_rtc(); | |
| if (now >= *next_tb) { | |
| *next_tb = ~(u64)0; | |
| if (evt->event_handler) | |
| evt->event_handler(evt); | |
| __this_cpu_inc(irq_stat.timer_irqs_event); | |
| } else { | |
| now = *next_tb - now; | |
| if (now <= DECREMENTER_MAX) | |
| set_dec((int)now); | |
| /* We may have raced with new irq work */ | |
| if (test_irq_work_pending()) | |
| set_dec(1); | |
| __this_cpu_inc(irq_stat.timer_irqs_others); | |
| } | |
| #ifdef CONFIG_PPC64 | |
| /* collect purr register values often, for accurate calculations */ | |
| if (firmware_has_feature(FW_FEATURE_SPLPAR)) { | |
| struct cpu_usage *cu = this_cpu_ptr(&cpu_usage_array); | |
| cu->current_tb = mfspr(SPRN_PURR); | |
| } | |
| #endif | |
| trace_timer_interrupt_exit(regs); | |
| } | |
| /* | |
| * timer_interrupt - gets called when the decrementer overflows, | |
| * with interrupts disabled. | |
| */ | |
| void timer_interrupt(struct pt_regs * regs) | |
| { | |
| struct pt_regs *old_regs; | |
| u64 *next_tb = this_cpu_ptr(&decrementers_next_tb); | |
| /* Ensure a positive value is written to the decrementer, or else | |
| * some CPUs will continue to take decrementer exceptions. | |
| */ | |
| set_dec(DECREMENTER_MAX); | |
| /* Some implementations of hotplug will get timer interrupts while | |
| * offline, just ignore these and we also need to set | |
| * decrementers_next_tb as MAX to make sure __check_irq_replay | |
| * don't replay timer interrupt when return, otherwise we'll trap | |
| * here infinitely :( | |
| */ | |
| if (!cpu_online(smp_processor_id())) { | |
| *next_tb = ~(u64)0; | |
| return; | |
| } | |
| /* Conditionally hard-enable interrupts now that the DEC has been | |
| * bumped to its maximum value | |
| */ | |
| may_hard_irq_enable(); | |
| #if defined(CONFIG_PPC32) && defined(CONFIG_PPC_PMAC) | |
| if (atomic_read(&ppc_n_lost_interrupts) != 0) | |
| do_IRQ(regs); | |
| #endif | |
| old_regs = set_irq_regs(regs); | |
| irq_enter(); | |
| __timer_interrupt(); | |
| irq_exit(); | |
| set_irq_regs(old_regs); | |
| } | |
| /* | |
| * Hypervisor decrementer interrupts shouldn't occur but are sometimes | |
| * left pending on exit from a KVM guest. We don't need to do anything | |
| * to clear them, as they are edge-triggered. | |
| */ | |
| void hdec_interrupt(struct pt_regs *regs) | |
| { | |
| } | |
| #ifdef CONFIG_SUSPEND | |
| static void generic_suspend_disable_irqs(void) | |
| { | |
| /* Disable the decrementer, so that it doesn't interfere | |
| * with suspending. | |
| */ | |
| set_dec(DECREMENTER_MAX); | |
| local_irq_disable(); | |
| set_dec(DECREMENTER_MAX); | |
| } | |
| static void generic_suspend_enable_irqs(void) | |
| { | |
| local_irq_enable(); | |
| } | |
| /* Overrides the weak version in kernel/power/main.c */ | |
| void arch_suspend_disable_irqs(void) | |
| { | |
| if (ppc_md.suspend_disable_irqs) | |
| ppc_md.suspend_disable_irqs(); | |
| generic_suspend_disable_irqs(); | |
| } | |
| /* Overrides the weak version in kernel/power/main.c */ | |
| void arch_suspend_enable_irqs(void) | |
| { | |
| generic_suspend_enable_irqs(); | |
| if (ppc_md.suspend_enable_irqs) | |
| ppc_md.suspend_enable_irqs(); | |
| } | |
| #endif | |
| unsigned long long tb_to_ns(unsigned long long ticks) | |
| { | |
| return mulhdu(ticks, tb_to_ns_scale) << tb_to_ns_shift; | |
| } | |
| EXPORT_SYMBOL_GPL(tb_to_ns); | |
| /* | |
| * Scheduler clock - returns current time in nanosec units. | |
| * | |
| * Note: mulhdu(a, b) (multiply high double unsigned) returns | |
| * the high 64 bits of a * b, i.e. (a * b) >> 64, where a and b | |
| * are 64-bit unsigned numbers. | |
| */ | |
| unsigned long long sched_clock(void) | |
| { | |
| if (__USE_RTC()) | |
| return get_rtc(); | |
| return mulhdu(get_tb() - boot_tb, tb_to_ns_scale) << tb_to_ns_shift; | |
| } | |
| #ifdef CONFIG_PPC_PSERIES | |
| /* | |
| * Running clock - attempts to give a view of time passing for a virtualised | |
| * kernels. | |
| * Uses the VTB register if available otherwise a next best guess. | |
| */ | |
| unsigned long long running_clock(void) | |
| { | |
| /* | |
| * Don't read the VTB as a host since KVM does not switch in host | |
| * timebase into the VTB when it takes a guest off the CPU, reading the | |
| * VTB would result in reading 'last switched out' guest VTB. | |
| * | |
| * Host kernels are often compiled with CONFIG_PPC_PSERIES checked, it | |
| * would be unsafe to rely only on the #ifdef above. | |
| */ | |
| if (firmware_has_feature(FW_FEATURE_LPAR) && | |
| cpu_has_feature(CPU_FTR_ARCH_207S)) | |
| return mulhdu(get_vtb() - boot_tb, tb_to_ns_scale) << tb_to_ns_shift; | |
| /* | |
| * This is a next best approximation without a VTB. | |
| * On a host which is running bare metal there should never be any stolen | |
| * time and on a host which doesn't do any virtualisation TB *should* equal | |
| * VTB so it makes no difference anyway. | |
| */ | |
| return local_clock() - cputime_to_nsecs(kcpustat_this_cpu->cpustat[CPUTIME_STEAL]); | |
| } | |
| #endif | |
| static int __init get_freq(char *name, int cells, unsigned long *val) | |
| { | |
| struct device_node *cpu; | |
| const __be32 *fp; | |
| int found = 0; | |
| /* The cpu node should have timebase and clock frequency properties */ | |
| cpu = of_find_node_by_type(NULL, "cpu"); | |
| if (cpu) { | |
| fp = of_get_property(cpu, name, NULL); | |
| if (fp) { | |
| found = 1; | |
| *val = of_read_ulong(fp, cells); | |
| } | |
| of_node_put(cpu); | |
| } | |
| return found; | |
| } | |
| static void start_cpu_decrementer(void) | |
| { | |
| #if defined(CONFIG_BOOKE) || defined(CONFIG_40x) | |
| /* Clear any pending timer interrupts */ | |
| mtspr(SPRN_TSR, TSR_ENW | TSR_WIS | TSR_DIS | TSR_FIS); | |
| /* Enable decrementer interrupt */ | |
| mtspr(SPRN_TCR, TCR_DIE); | |
| #endif /* defined(CONFIG_BOOKE) || defined(CONFIG_40x) */ | |
| } | |
| void __init generic_calibrate_decr(void) | |
| { | |
| ppc_tb_freq = DEFAULT_TB_FREQ; /* hardcoded default */ | |
| if (!get_freq("ibm,extended-timebase-frequency", 2, &ppc_tb_freq) && | |
| !get_freq("timebase-frequency", 1, &ppc_tb_freq)) { | |
| printk(KERN_ERR "WARNING: Estimating decrementer frequency " | |
| "(not found)\n"); | |
| } | |
| ppc_proc_freq = DEFAULT_PROC_FREQ; /* hardcoded default */ | |
| if (!get_freq("ibm,extended-clock-frequency", 2, &ppc_proc_freq) && | |
| !get_freq("clock-frequency", 1, &ppc_proc_freq)) { | |
| printk(KERN_ERR "WARNING: Estimating processor frequency " | |
| "(not found)\n"); | |
| } | |
| } | |
| int update_persistent_clock(struct timespec now) | |
| { | |
| struct rtc_time tm; | |
| if (!ppc_md.set_rtc_time) | |
| return -ENODEV; | |
| to_tm(now.tv_sec + 1 + timezone_offset, &tm); | |
| tm.tm_year -= 1900; | |
| tm.tm_mon -= 1; | |
| return ppc_md.set_rtc_time(&tm); | |
| } | |
| static void __read_persistent_clock(struct timespec *ts) | |
| { | |
| struct rtc_time tm; | |
| static int first = 1; | |
| ts->tv_nsec = 0; | |
| /* XXX this is a litle fragile but will work okay in the short term */ | |
| if (first) { | |
| first = 0; | |
| if (ppc_md.time_init) | |
| timezone_offset = ppc_md.time_init(); | |
| /* get_boot_time() isn't guaranteed to be safe to call late */ | |
| if (ppc_md.get_boot_time) { | |
| ts->tv_sec = ppc_md.get_boot_time() - timezone_offset; | |
| return; | |
| } | |
| } | |
| if (!ppc_md.get_rtc_time) { | |
| ts->tv_sec = 0; | |
| return; | |
| } | |
| ppc_md.get_rtc_time(&tm); | |
| ts->tv_sec = mktime(tm.tm_year+1900, tm.tm_mon+1, tm.tm_mday, | |
| tm.tm_hour, tm.tm_min, tm.tm_sec); | |
| } | |
| void read_persistent_clock(struct timespec *ts) | |
| { | |
| __read_persistent_clock(ts); | |
| /* Sanitize it in case real time clock is set below EPOCH */ | |
| if (ts->tv_sec < 0) { | |
| ts->tv_sec = 0; | |
| ts->tv_nsec = 0; | |
| } | |
| } | |
| /* clocksource code */ | |
| static cycle_t rtc_read(struct clocksource *cs) | |
| { | |
| return (cycle_t)get_rtc(); | |
| } | |
| static cycle_t timebase_read(struct clocksource *cs) | |
| { | |
| return (cycle_t)get_tb(); | |
| } | |
| void update_vsyscall_old(struct timespec *wall_time, struct timespec *wtm, | |
| struct clocksource *clock, u32 mult, cycle_t cycle_last) | |
| { | |
| u64 new_tb_to_xs, new_stamp_xsec; | |
| u32 frac_sec; | |
| if (clock != &clocksource_timebase) | |
| return; | |
| /* Make userspace gettimeofday spin until we're done. */ | |
| ++vdso_data->tb_update_count; | |
| smp_mb(); | |
| /* 19342813113834067 ~= 2^(20+64) / 1e9 */ | |
| new_tb_to_xs = (u64) mult * (19342813113834067ULL >> clock->shift); | |
| new_stamp_xsec = (u64) wall_time->tv_nsec * XSEC_PER_SEC; | |
| do_div(new_stamp_xsec, 1000000000); | |
| new_stamp_xsec += (u64) wall_time->tv_sec * XSEC_PER_SEC; | |
| BUG_ON(wall_time->tv_nsec >= NSEC_PER_SEC); | |
| /* this is tv_nsec / 1e9 as a 0.32 fraction */ | |
| frac_sec = ((u64) wall_time->tv_nsec * 18446744073ULL) >> 32; | |
| /* | |
| * tb_update_count is used to allow the userspace gettimeofday code | |
| * to assure itself that it sees a consistent view of the tb_to_xs and | |
| * stamp_xsec variables. It reads the tb_update_count, then reads | |
| * tb_to_xs and stamp_xsec and then reads tb_update_count again. If | |
| * the two values of tb_update_count match and are even then the | |
| * tb_to_xs and stamp_xsec values are consistent. If not, then it | |
| * loops back and reads them again until this criteria is met. | |
| * We expect the caller to have done the first increment of | |
| * vdso_data->tb_update_count already. | |
| */ | |
| vdso_data->tb_orig_stamp = cycle_last; | |
| vdso_data->stamp_xsec = new_stamp_xsec; | |
| vdso_data->tb_to_xs = new_tb_to_xs; | |
| vdso_data->wtom_clock_sec = wtm->tv_sec; | |
| vdso_data->wtom_clock_nsec = wtm->tv_nsec; | |
| vdso_data->stamp_xtime = *wall_time; | |
| vdso_data->stamp_sec_fraction = frac_sec; | |
| smp_wmb(); | |
| ++(vdso_data->tb_update_count); | |
| } | |
| void update_vsyscall_tz(void) | |
| { | |
| vdso_data->tz_minuteswest = sys_tz.tz_minuteswest; | |
| vdso_data->tz_dsttime = sys_tz.tz_dsttime; | |
| } | |
| static void __init clocksource_init(void) | |
| { | |
| struct clocksource *clock; | |
| if (__USE_RTC()) | |
| clock = &clocksource_rtc; | |
| else | |
| clock = &clocksource_timebase; | |
| if (clocksource_register_hz(clock, tb_ticks_per_sec)) { | |
| printk(KERN_ERR "clocksource: %s is already registered\n", | |
| clock->name); | |
| return; | |
| } | |
| printk(KERN_INFO "clocksource: %s mult[%x] shift[%d] registered\n", | |
| clock->name, clock->mult, clock->shift); | |
| } | |
| static int decrementer_set_next_event(unsigned long evt, | |
| struct clock_event_device *dev) | |
| { | |
| __this_cpu_write(decrementers_next_tb, get_tb_or_rtc() + evt); | |
| set_dec(evt); | |
| /* We may have raced with new irq work */ | |
| if (test_irq_work_pending()) | |
| set_dec(1); | |
| return 0; | |
| } | |
| static int decrementer_shutdown(struct clock_event_device *dev) | |
| { | |
| decrementer_set_next_event(DECREMENTER_MAX, dev); | |
| return 0; | |
| } | |
| /* Interrupt handler for the timer broadcast IPI */ | |
| void tick_broadcast_ipi_handler(void) | |
| { | |
| u64 *next_tb = this_cpu_ptr(&decrementers_next_tb); | |
| *next_tb = get_tb_or_rtc(); | |
| __timer_interrupt(); | |
| } | |
| static void register_decrementer_clockevent(int cpu) | |
| { | |
| struct clock_event_device *dec = &per_cpu(decrementers, cpu); | |
| *dec = decrementer_clockevent; | |
| dec->cpumask = cpumask_of(cpu); | |
| printk_once(KERN_DEBUG "clockevent: %s mult[%x] shift[%d] cpu[%d]\n", | |
| dec->name, dec->mult, dec->shift, cpu); | |
| clockevents_register_device(dec); | |
| } | |
| static void __init init_decrementer_clockevent(void) | |
| { | |
| int cpu = smp_processor_id(); | |
| clockevents_calc_mult_shift(&decrementer_clockevent, ppc_tb_freq, 4); | |
| decrementer_clockevent.max_delta_ns = | |
| clockevent_delta2ns(DECREMENTER_MAX, &decrementer_clockevent); | |
| decrementer_clockevent.min_delta_ns = | |
| clockevent_delta2ns(2, &decrementer_clockevent); | |
| register_decrementer_clockevent(cpu); | |
| } | |
| void secondary_cpu_time_init(void) | |
| { | |
| /* Start the decrementer on CPUs that have manual control | |
| * such as BookE | |
| */ | |
| start_cpu_decrementer(); | |
| /* FIME: Should make unrelatred change to move snapshot_timebase | |
| * call here ! */ | |
| register_decrementer_clockevent(smp_processor_id()); | |
| } | |
| /* This function is only called on the boot processor */ | |
| void __init time_init(void) | |
| { | |
| struct div_result res; | |
| u64 scale; | |
| unsigned shift; | |
| if (__USE_RTC()) { | |
| /* 601 processor: dec counts down by 128 every 128ns */ | |
| ppc_tb_freq = 1000000000; | |
| } else { | |
| /* Normal PowerPC with timebase register */ | |
| ppc_md.calibrate_decr(); | |
| printk(KERN_DEBUG "time_init: decrementer frequency = %lu.%.6lu MHz\n", | |
| ppc_tb_freq / 1000000, ppc_tb_freq % 1000000); | |
| printk(KERN_DEBUG "time_init: processor frequency = %lu.%.6lu MHz\n", | |
| ppc_proc_freq / 1000000, ppc_proc_freq % 1000000); | |
| } | |
| tb_ticks_per_jiffy = ppc_tb_freq / HZ; | |
| tb_ticks_per_sec = ppc_tb_freq; | |
| tb_ticks_per_usec = ppc_tb_freq / 1000000; | |
| calc_cputime_factors(); | |
| setup_cputime_one_jiffy(); | |
| /* | |
| * Compute scale factor for sched_clock. | |
| * The calibrate_decr() function has set tb_ticks_per_sec, | |
| * which is the timebase frequency. | |
| * We compute 1e9 * 2^64 / tb_ticks_per_sec and interpret | |
| * the 128-bit result as a 64.64 fixed-point number. | |
| * We then shift that number right until it is less than 1.0, | |
| * giving us the scale factor and shift count to use in | |
| * sched_clock(). | |
| */ | |
| div128_by_32(1000000000, 0, tb_ticks_per_sec, &res); | |
| scale = res.result_low; | |
| for (shift = 0; res.result_high != 0; ++shift) { | |
| scale = (scale >> 1) | (res.result_high << 63); | |
| res.result_high >>= 1; | |
| } | |
| tb_to_ns_scale = scale; | |
| tb_to_ns_shift = shift; | |
| /* Save the current timebase to pretty up CONFIG_PRINTK_TIME */ | |
| boot_tb = get_tb_or_rtc(); | |
| /* If platform provided a timezone (pmac), we correct the time */ | |
| if (timezone_offset) { | |
| sys_tz.tz_minuteswest = -timezone_offset / 60; | |
| sys_tz.tz_dsttime = 0; | |
| } | |
| vdso_data->tb_update_count = 0; | |
| vdso_data->tb_ticks_per_sec = tb_ticks_per_sec; | |
| /* Start the decrementer on CPUs that have manual control | |
| * such as BookE | |
| */ | |
| start_cpu_decrementer(); | |
| /* Register the clocksource */ | |
| clocksource_init(); | |
| init_decrementer_clockevent(); | |
| tick_setup_hrtimer_broadcast(); | |
| #ifdef CONFIG_COMMON_CLK | |
| of_clk_init(NULL); | |
| #endif | |
| } | |
| #define FEBRUARY 2 | |
| #define STARTOFTIME 1970 | |
| #define SECDAY 86400L | |
| #define SECYR (SECDAY * 365) | |
| #define leapyear(year) ((year) % 4 == 0 && \ | |
| ((year) % 100 != 0 || (year) % 400 == 0)) | |
| #define days_in_year(a) (leapyear(a) ? 366 : 365) | |
| #define days_in_month(a) (month_days[(a) - 1]) | |
| static int month_days[12] = { | |
| 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31 | |
| }; | |
| /* | |
| * This only works for the Gregorian calendar - i.e. after 1752 (in the UK) | |
| */ | |
| void GregorianDay(struct rtc_time * tm) | |
| { | |
| int leapsToDate; | |
| int lastYear; | |
| int day; | |
| int MonthOffset[] = { 0, 31, 59, 90, 120, 151, 181, 212, 243, 273, 304, 334 }; | |
| lastYear = tm->tm_year - 1; | |
| /* | |
| * Number of leap corrections to apply up to end of last year | |
| */ | |
| leapsToDate = lastYear / 4 - lastYear / 100 + lastYear / 400; | |
| /* | |
| * This year is a leap year if it is divisible by 4 except when it is | |
| * divisible by 100 unless it is divisible by 400 | |
| * | |
| * e.g. 1904 was a leap year, 1900 was not, 1996 is, and 2000 was | |
| */ | |
| day = tm->tm_mon > 2 && leapyear(tm->tm_year); | |
| day += lastYear*365 + leapsToDate + MonthOffset[tm->tm_mon-1] + | |
| tm->tm_mday; | |
| tm->tm_wday = day % 7; | |
| } | |
| EXPORT_SYMBOL_GPL(GregorianDay); | |
| void to_tm(int tim, struct rtc_time * tm) | |
| { | |
| register int i; | |
| register long hms, day; | |
| day = tim / SECDAY; | |
| hms = tim % SECDAY; | |
| /* Hours, minutes, seconds are easy */ | |
| tm->tm_hour = hms / 3600; | |
| tm->tm_min = (hms % 3600) / 60; | |
| tm->tm_sec = (hms % 3600) % 60; | |
| /* Number of years in days */ | |
| for (i = STARTOFTIME; day >= days_in_year(i); i++) | |
| day -= days_in_year(i); | |
| tm->tm_year = i; | |
| /* Number of months in days left */ | |
| if (leapyear(tm->tm_year)) | |
| days_in_month(FEBRUARY) = 29; | |
| for (i = 1; day >= days_in_month(i); i++) | |
| day -= days_in_month(i); | |
| days_in_month(FEBRUARY) = 28; | |
| tm->tm_mon = i; | |
| /* Days are what is left over (+1) from all that. */ | |
| tm->tm_mday = day + 1; | |
| /* | |
| * Determine the day of week | |
| */ | |
| GregorianDay(tm); | |
| } | |
| EXPORT_SYMBOL(to_tm); | |
| /* | |
| * Divide a 128-bit dividend by a 32-bit divisor, leaving a 128 bit | |
| * result. | |
| */ | |
| void div128_by_32(u64 dividend_high, u64 dividend_low, | |
| unsigned divisor, struct div_result *dr) | |
| { | |
| unsigned long a, b, c, d; | |
| unsigned long w, x, y, z; | |
| u64 ra, rb, rc; | |
| a = dividend_high >> 32; | |
| b = dividend_high & 0xffffffff; | |
| c = dividend_low >> 32; | |
| d = dividend_low & 0xffffffff; | |
| w = a / divisor; | |
| ra = ((u64)(a - (w * divisor)) << 32) + b; | |
| rb = ((u64) do_div(ra, divisor) << 32) + c; | |
| x = ra; | |
| rc = ((u64) do_div(rb, divisor) << 32) + d; | |
| y = rb; | |
| do_div(rc, divisor); | |
| z = rc; | |
| dr->result_high = ((u64)w << 32) + x; | |
| dr->result_low = ((u64)y << 32) + z; | |
| } | |
| /* We don't need to calibrate delay, we use the CPU timebase for that */ | |
| void calibrate_delay(void) | |
| { | |
| /* Some generic code (such as spinlock debug) use loops_per_jiffy | |
| * as the number of __delay(1) in a jiffy, so make it so | |
| */ | |
| loops_per_jiffy = tb_ticks_per_jiffy; | |
| } | |
| static int __init rtc_init(void) | |
| { | |
| struct platform_device *pdev; | |
| if (!ppc_md.get_rtc_time) | |
| return -ENODEV; | |
| pdev = platform_device_register_simple("rtc-generic", -1, NULL, 0); | |
| return PTR_ERR_OR_ZERO(pdev); | |
| } | |
| device_initcall(rtc_init); |