blob: a59047d7657eb414999d1f9081d914073a645f19 [file] [log] [blame]
#
# Accelerometer drivers
#
# When adding new entries keep the list in alphabetical order
menu "Accelerometers"
config BMA180
tristate "Bosch BMA180/BMA250 3-Axis Accelerometer Driver"
depends on I2C
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
help
Say Y here if you want to build a driver for the Bosch BMA180 or
BMA250 triaxial acceleration sensor.
To compile this driver as a module, choose M here: the
module will be called bma180.
config BMC150_ACCEL
tristate "Bosch BMC150 Accelerometer Driver"
depends on I2C
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
help
Say yes here to build support for the following Bosch accelerometers:
BMC150, BMI055, BMA250E, BMA222E, BMA255, BMA280.
Currently this only supports the device via an i2c interface.
This is a combo module with both accelerometer and magnetometer.
This driver is only implementing accelerometer part, which has
its own address and register map.
config HID_SENSOR_ACCEL_3D
depends on HID_SENSOR_HUB
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
select HID_SENSOR_IIO_COMMON
select HID_SENSOR_IIO_TRIGGER
tristate "HID Accelerometers 3D"
help
Say yes here to build support for the HID SENSOR
accelerometers 3D.
To compile this driver as a module, choose M here: the
module will be called hid-sensor-accel-3d.
config IIO_ST_ACCEL_3AXIS
tristate "STMicroelectronics accelerometers 3-Axis Driver"
depends on (I2C || SPI_MASTER) && SYSFS
select IIO_ST_SENSORS_CORE
select IIO_ST_ACCEL_I2C_3AXIS if (I2C)
select IIO_ST_ACCEL_SPI_3AXIS if (SPI_MASTER)
select IIO_TRIGGERED_BUFFER if (IIO_BUFFER)
help
Say yes here to build support for STMicroelectronics accelerometers:
LSM303DLH, LSM303DLHC, LIS3DH, LSM330D, LSM330DL, LSM330DLC,
LIS331DLH, LSM303DL, LSM303DLM, LSM330.
This driver can also be built as a module. If so, these modules
will be created:
- st_accel (core functions for the driver [it is mandatory]);
- st_accel_i2c (necessary for the I2C devices [optional*]);
- st_accel_spi (necessary for the SPI devices [optional*]);
(*) one of these is necessary to do something.
config IIO_ST_ACCEL_I2C_3AXIS
tristate
depends on IIO_ST_ACCEL_3AXIS
depends on IIO_ST_SENSORS_I2C
config IIO_ST_ACCEL_SPI_3AXIS
tristate
depends on IIO_ST_ACCEL_3AXIS
depends on IIO_ST_SENSORS_SPI
config KXSD9
tristate "Kionix KXSD9 Accelerometer Driver"
depends on SPI
help
Say yes here to build support for the Kionix KXSD9 accelerometer.
Currently this only supports the device via an SPI interface.
To compile this driver as a module, choose M here: the module
will be called kxsd9.
config KXCJK1013
tristate "Kionix 3-Axis Accelerometer Driver"
depends on I2C
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
help
Say Y here if you want to build a driver for the Kionix KXCJK-1013
triaxial acceleration sensor. This driver also supports KXCJ9-1008
and KXTJ2-1009.
To compile this driver as a module, choose M here: the module will
be called kxcjk-1013.
config MMA8452
tristate "Freescale MMA8452Q Accelerometer Driver"
depends on I2C
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
help
Say yes here to build support for the Freescale MMA8452Q 3-axis
accelerometer.
To compile this driver as a module, choose M here: the module
will be called mma8452.
config MMA9551_CORE
tristate
config MMA9551
tristate "Freescale MMA9551L Intelligent Motion-Sensing Platform Driver"
depends on I2C
select MMA9551_CORE
help
Say yes here to build support for the Freescale MMA9551L
Intelligent Motion-Sensing Platform Driver.
To compile this driver as a module, choose M here: the module
will be called mma9551.
config MMA9553
tristate "Freescale MMA9553L Intelligent Pedometer Platform Driver"
depends on I2C
select MMA9551_CORE
help
Say yes here to build support for the Freescale MMA9553L
Intelligent Pedometer Platform Driver.
To compile this driver as a module, choose M here: the module
will be called mma9553.
config STK8312
tristate "Sensortek STK8312 3-Axis Accelerometer Driver"
depends on I2C
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
help
Say yes here to get support for the Sensortek STK8312 3-axis
accelerometer.
Choosing M will build the driver as a module. If so, the module
will be called stk8312.
config STK8BA50
tristate "Sensortek STK8BA50 3-Axis Accelerometer Driver"
depends on I2C
help
Say yes here to get support for the Sensortek STK8BA50 3-axis
accelerometer.
Choosing M will build the driver as a module. If so, the module
will be called stk8ba50.
endmenu