blob: e6375b4de79e58e05ba935c51de8aa088435b792 [file] [log] [blame] [edit]
#include <linux/types.h>
#include <linux/mm.h>
#include <linux/ioport.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/module.h>
#include <asm/page.h>
#include <asm/pgtable.h>
#include <asm/amigaints.h>
#include <asm/amigahw.h>
#include "scsi.h"
#include "wd33c93.h"
#include "a3000.h"
struct a3000_hostdata {
struct WD33C93_hostdata wh;
struct a3000_scsiregs *regs;
};
static irqreturn_t a3000_intr(int irq, void *data)
{
struct Scsi_Host *instance = data;
struct a3000_hostdata *hdata = shost_priv(instance);
unsigned int status = hdata->regs->ISTR;
unsigned long flags;
if (!(status & ISTR_INT_P))
return IRQ_NONE;
if (status & ISTR_INTS) {
spin_lock_irqsave(instance->host_lock, flags);
wd33c93_intr(instance);
spin_unlock_irqrestore(instance->host_lock, flags);
return IRQ_HANDLED;
}
pr_warning("Non-serviced A3000 SCSI-interrupt? ISTR = %02x\n", status);
return IRQ_NONE;
}
static int dma_setup(struct scsi_cmnd *cmd, int dir_in)
{
struct Scsi_Host *instance = cmd->device->host;
struct a3000_hostdata *hdata = shost_priv(instance);
struct WD33C93_hostdata *wh = &hdata->wh;
struct a3000_scsiregs *regs = hdata->regs;
unsigned short cntr = CNTR_PDMD | CNTR_INTEN;
unsigned long addr = virt_to_bus(cmd->SCp.ptr);
/*
* if the physical address has the wrong alignment, or if
* physical address is bad, or if it is a write and at the
* end of a physical memory chunk, then allocate a bounce
* buffer
*/
if (addr & A3000_XFER_MASK) {
wh->dma_bounce_len = (cmd->SCp.this_residual + 511) & ~0x1ff;
wh->dma_bounce_buffer = kmalloc(wh->dma_bounce_len,
GFP_KERNEL);
/* can't allocate memory; use PIO */
if (!wh->dma_bounce_buffer) {
wh->dma_bounce_len = 0;
return 1;
}
if (!dir_in) {
/* copy to bounce buffer for a write */
memcpy(wh->dma_bounce_buffer, cmd->SCp.ptr,
cmd->SCp.this_residual);
}
addr = virt_to_bus(wh->dma_bounce_buffer);
}
/* setup dma direction */
if (!dir_in)
cntr |= CNTR_DDIR;
/* remember direction */
wh->dma_dir = dir_in;
regs->CNTR = cntr;
/* setup DMA *physical* address */
regs->ACR = addr;
if (dir_in) {
/* invalidate any cache */
cache_clear(addr, cmd->SCp.this_residual);
} else {
/* push any dirty cache */
cache_push(addr, cmd->SCp.this_residual);
}
/* start DMA */
mb(); /* make sure setup is completed */
regs->ST_DMA = 1;
mb(); /* make sure DMA has started before next IO */
/* return success */
return 0;
}
static void dma_stop(struct Scsi_Host *instance, struct scsi_cmnd *SCpnt,
int status)
{
struct a3000_hostdata *hdata = shost_priv(instance);
struct WD33C93_hostdata *wh = &hdata->wh;
struct a3000_scsiregs *regs = hdata->regs;
/* disable SCSI interrupts */
unsigned short cntr = CNTR_PDMD;
if (!wh->dma_dir)
cntr |= CNTR_DDIR;
regs->CNTR = cntr;
mb(); /* make sure CNTR is updated before next IO */
/* flush if we were reading */
if (wh->dma_dir) {
regs->FLUSH = 1;
mb(); /* don't allow prefetch */
while (!(regs->ISTR & ISTR_FE_FLG))
barrier();
mb(); /* no IO until FLUSH is done */
}
/* clear a possible interrupt */
/* I think that this CINT is only necessary if you are
* using the terminal count features. HM 7 Mar 1994
*/
regs->CINT = 1;
/* stop DMA */
regs->SP_DMA = 1;
mb(); /* make sure DMA is stopped before next IO */
/* restore the CONTROL bits (minus the direction flag) */
regs->CNTR = CNTR_PDMD | CNTR_INTEN;
mb(); /* make sure CNTR is updated before next IO */
/* copy from a bounce buffer, if necessary */
if (status && wh->dma_bounce_buffer) {
if (SCpnt) {
if (wh->dma_dir && SCpnt)
memcpy(SCpnt->SCp.ptr, wh->dma_bounce_buffer,
SCpnt->SCp.this_residual);
kfree(wh->dma_bounce_buffer);
wh->dma_bounce_buffer = NULL;
wh->dma_bounce_len = 0;
} else {
kfree(wh->dma_bounce_buffer);
wh->dma_bounce_buffer = NULL;
wh->dma_bounce_len = 0;
}
}
}
static int a3000_bus_reset(struct scsi_cmnd *cmd)
{
struct Scsi_Host *instance = cmd->device->host;
/* FIXME perform bus-specific reset */
/* FIXME 2: kill this entire function, which should
cause mid-layer to call wd33c93_host_reset anyway? */
spin_lock_irq(instance->host_lock);
wd33c93_host_reset(cmd);
spin_unlock_irq(instance->host_lock);
return SUCCESS;
}
static struct scsi_host_template amiga_a3000_scsi_template = {
.module = THIS_MODULE,
.name = "Amiga 3000 built-in SCSI",
.show_info = wd33c93_show_info,
.write_info = wd33c93_write_info,
.proc_name = "A3000",
.queuecommand = wd33c93_queuecommand,
.eh_abort_handler = wd33c93_abort,
.eh_bus_reset_handler = a3000_bus_reset,
.eh_host_reset_handler = wd33c93_host_reset,
.can_queue = CAN_QUEUE,
.this_id = 7,
.sg_tablesize = SG_ALL,
.cmd_per_lun = CMD_PER_LUN,
.use_clustering = ENABLE_CLUSTERING
};
static int __init amiga_a3000_scsi_probe(struct platform_device *pdev)
{
struct resource *res;
struct Scsi_Host *instance;
int error;
struct a3000_scsiregs *regs;
wd33c93_regs wdregs;
struct a3000_hostdata *hdata;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res)
return -ENODEV;
if (!request_mem_region(res->start, resource_size(res), "wd33c93"))
return -EBUSY;
instance = scsi_host_alloc(&amiga_a3000_scsi_template,
sizeof(struct a3000_hostdata));
if (!instance) {
error = -ENOMEM;
goto fail_alloc;
}
instance->irq = IRQ_AMIGA_PORTS;
regs = ZTWO_VADDR(res->start);
regs->DAWR = DAWR_A3000;
wdregs.SASR = &regs->SASR;
wdregs.SCMD = &regs->SCMD;
hdata = shost_priv(instance);
hdata->wh.no_sync = 0xff;
hdata->wh.fast = 0;
hdata->wh.dma_mode = CTRL_DMA;
hdata->regs = regs;
wd33c93_init(instance, wdregs, dma_setup, dma_stop, WD33C93_FS_12_15);
error = request_irq(IRQ_AMIGA_PORTS, a3000_intr, IRQF_SHARED,
"A3000 SCSI", instance);
if (error)
goto fail_irq;
regs->CNTR = CNTR_PDMD | CNTR_INTEN;
error = scsi_add_host(instance, NULL);
if (error)
goto fail_host;
platform_set_drvdata(pdev, instance);
scsi_scan_host(instance);
return 0;
fail_host:
free_irq(IRQ_AMIGA_PORTS, instance);
fail_irq:
scsi_host_put(instance);
fail_alloc:
release_mem_region(res->start, resource_size(res));
return error;
}
static int __exit amiga_a3000_scsi_remove(struct platform_device *pdev)
{
struct Scsi_Host *instance = platform_get_drvdata(pdev);
struct a3000_hostdata *hdata = shost_priv(instance);
struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
hdata->regs->CNTR = 0;
scsi_remove_host(instance);
free_irq(IRQ_AMIGA_PORTS, instance);
scsi_host_put(instance);
release_mem_region(res->start, resource_size(res));
return 0;
}
static struct platform_driver amiga_a3000_scsi_driver = {
.remove = __exit_p(amiga_a3000_scsi_remove),
.driver = {
.name = "amiga-a3000-scsi",
},
};
module_platform_driver_probe(amiga_a3000_scsi_driver, amiga_a3000_scsi_probe);
MODULE_DESCRIPTION("Amiga 3000 built-in SCSI");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:amiga-a3000-scsi");