blob: 7b6e4c843e19dce46ff287c416422b60378632ac [file] [log] [blame]
/*
* Copyright (c) 2006, 2007 QLogic Corporation. All rights reserved.
* Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
* General Public License (GPL) Version 2, available from the file
* COPYING in the main directory of this source tree, or the
* OpenIB.org BSD license below:
*
* Redistribution and use in source and binary forms, with or
* without modification, are permitted provided that the following
* conditions are met:
*
* - Redistributions of source code must retain the above
* copyright notice, this list of conditions and the following
* disclaimer.
*
* - Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and/or other materials
* provided with the distribution.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*/
/*
* This file is conditionally built on x86_64 only. Otherwise weak symbol
* versions of the functions exported from here are used.
*/
#include <linux/pci.h>
#include <asm/processor.h>
#include "ipath_kernel.h"
/**
* ipath_enable_wc - enable write combining for MMIO writes to the device
* @dd: infinipath device
*
* This routine is x86_64-specific; it twiddles the CPU's MTRRs to enable
* write combining.
*/
int ipath_enable_wc(struct ipath_devdata *dd)
{
int ret = 0;
u64 pioaddr, piolen;
unsigned bits;
const unsigned long addr = pci_resource_start(dd->pcidev, 0);
const size_t len = pci_resource_len(dd->pcidev, 0);
/*
* Set the PIO buffers to be WCCOMB, so we get HT bursts to the
* chip. Linux (possibly the hardware) requires it to be on a power
* of 2 address matching the length (which has to be a power of 2).
* For rev1, that means the base address, for rev2, it will be just
* the PIO buffers themselves.
* For chips with two sets of buffers, the calculations are
* somewhat more complicated; we need to sum, and the piobufbase
* register has both offsets, 2K in low 32 bits, 4K in high 32 bits.
* The buffers are still packed, so a single range covers both.
*/
if (dd->ipath_piobcnt2k && dd->ipath_piobcnt4k) { /* 2 sizes */
unsigned long pio2kbase, pio4kbase;
pio2kbase = dd->ipath_piobufbase & 0xffffffffUL;
pio4kbase = (dd->ipath_piobufbase >> 32) & 0xffffffffUL;
if (pio2kbase < pio4kbase) { /* all, for now */
pioaddr = addr + pio2kbase;
piolen = pio4kbase - pio2kbase +
dd->ipath_piobcnt4k * dd->ipath_4kalign;
} else {
pioaddr = addr + pio4kbase;
piolen = pio2kbase - pio4kbase +
dd->ipath_piobcnt2k * dd->ipath_palign;
}
} else { /* single buffer size (2K, currently) */
pioaddr = addr + dd->ipath_piobufbase;
piolen = dd->ipath_piobcnt2k * dd->ipath_palign +
dd->ipath_piobcnt4k * dd->ipath_4kalign;
}
for (bits = 0; !(piolen & (1ULL << bits)); bits++)
/* do nothing */ ;
if (piolen != (1ULL << bits)) {
piolen >>= bits;
while (piolen >>= 1)
bits++;
piolen = 1ULL << (bits + 1);
}
if (pioaddr & (piolen - 1)) {
u64 atmp;
ipath_dbg("pioaddr %llx not on right boundary for size "
"%llx, fixing\n",
(unsigned long long) pioaddr,
(unsigned long long) piolen);
atmp = pioaddr & ~(piolen - 1);
if (atmp < addr || (atmp + piolen) > (addr + len)) {
ipath_dev_err(dd, "No way to align address/size "
"(%llx/%llx), no WC mtrr\n",
(unsigned long long) atmp,
(unsigned long long) piolen << 1);
ret = -ENODEV;
} else {
ipath_dbg("changing WC base from %llx to %llx, "
"len from %llx to %llx\n",
(unsigned long long) pioaddr,
(unsigned long long) atmp,
(unsigned long long) piolen,
(unsigned long long) piolen << 1);
pioaddr = atmp;
piolen <<= 1;
}
}
if (!ret) {
dd->wc_cookie = arch_phys_wc_add(pioaddr, piolen);
if (dd->wc_cookie < 0) {
ipath_dev_err(dd, "Seting mtrr failed on PIO buffers\n");
ret = -ENODEV;
} else if (dd->wc_cookie == 0)
ipath_cdbg(VERBOSE, "Set mtrr for chip to WC not needed\n");
else
ipath_cdbg(VERBOSE, "Set mtrr for chip to WC\n");
}
return ret;
}
/**
* ipath_disable_wc - disable write combining for MMIO writes to the device
* @dd: infinipath device
*/
void ipath_disable_wc(struct ipath_devdata *dd)
{
arch_phys_wc_del(dd->wc_cookie);
}