| /* | |
| * Userspace interface | |
| * Linux ethernet bridge | |
| * | |
| * Authors: | |
| * Lennert Buytenhek <buytenh@gnu.org> | |
| * | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public License | |
| * as published by the Free Software Foundation; either version | |
| * 2 of the License, or (at your option) any later version. | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/netdevice.h> | |
| #include <linux/etherdevice.h> | |
| #include <linux/netpoll.h> | |
| #include <linux/ethtool.h> | |
| #include <linux/if_arp.h> | |
| #include <linux/module.h> | |
| #include <linux/init.h> | |
| #include <linux/rtnetlink.h> | |
| #include <linux/if_ether.h> | |
| #include <linux/slab.h> | |
| #include <net/sock.h> | |
| #include <linux/if_vlan.h> | |
| #include "br_private.h" | |
| /* | |
| * Determine initial path cost based on speed. | |
| * using recommendations from 802.1d standard | |
| * | |
| * Since driver might sleep need to not be holding any locks. | |
| */ | |
| static int port_cost(struct net_device *dev) | |
| { | |
| struct ethtool_cmd ecmd; | |
| if (!__ethtool_get_settings(dev, &ecmd)) { | |
| switch (ethtool_cmd_speed(&ecmd)) { | |
| case SPEED_10000: | |
| return 2; | |
| case SPEED_1000: | |
| return 4; | |
| case SPEED_100: | |
| return 19; | |
| case SPEED_10: | |
| return 100; | |
| } | |
| } | |
| /* Old silly heuristics based on name */ | |
| if (!strncmp(dev->name, "lec", 3)) | |
| return 7; | |
| if (!strncmp(dev->name, "plip", 4)) | |
| return 2500; | |
| return 100; /* assume old 10Mbps */ | |
| } | |
| /* Check for port carrier transitions. */ | |
| void br_port_carrier_check(struct net_bridge_port *p) | |
| { | |
| struct net_device *dev = p->dev; | |
| struct net_bridge *br = p->br; | |
| if (!(p->flags & BR_ADMIN_COST) && | |
| netif_running(dev) && netif_oper_up(dev)) | |
| p->path_cost = port_cost(dev); | |
| if (!netif_running(br->dev)) | |
| return; | |
| spin_lock_bh(&br->lock); | |
| if (netif_running(dev) && netif_oper_up(dev)) { | |
| if (p->state == BR_STATE_DISABLED) | |
| br_stp_enable_port(p); | |
| } else { | |
| if (p->state != BR_STATE_DISABLED) | |
| br_stp_disable_port(p); | |
| } | |
| spin_unlock_bh(&br->lock); | |
| } | |
| static void br_port_set_promisc(struct net_bridge_port *p) | |
| { | |
| int err = 0; | |
| if (br_promisc_port(p)) | |
| return; | |
| err = dev_set_promiscuity(p->dev, 1); | |
| if (err) | |
| return; | |
| br_fdb_unsync_static(p->br, p); | |
| p->flags |= BR_PROMISC; | |
| } | |
| static void br_port_clear_promisc(struct net_bridge_port *p) | |
| { | |
| int err; | |
| /* Check if the port is already non-promisc or if it doesn't | |
| * support UNICAST filtering. Without unicast filtering support | |
| * we'll end up re-enabling promisc mode anyway, so just check for | |
| * it here. | |
| */ | |
| if (!br_promisc_port(p) || !(p->dev->priv_flags & IFF_UNICAST_FLT)) | |
| return; | |
| /* Since we'll be clearing the promisc mode, program the port | |
| * first so that we don't have interruption in traffic. | |
| */ | |
| err = br_fdb_sync_static(p->br, p); | |
| if (err) | |
| return; | |
| dev_set_promiscuity(p->dev, -1); | |
| p->flags &= ~BR_PROMISC; | |
| } | |
| /* When a port is added or removed or when certain port flags | |
| * change, this function is called to automatically manage | |
| * promiscuity setting of all the bridge ports. We are always called | |
| * under RTNL so can skip using rcu primitives. | |
| */ | |
| void br_manage_promisc(struct net_bridge *br) | |
| { | |
| struct net_bridge_port *p; | |
| bool set_all = false; | |
| /* If vlan filtering is disabled or bridge interface is placed | |
| * into promiscuous mode, place all ports in promiscuous mode. | |
| */ | |
| if ((br->dev->flags & IFF_PROMISC) || !br_vlan_enabled(br)) | |
| set_all = true; | |
| list_for_each_entry(p, &br->port_list, list) { | |
| if (set_all) { | |
| br_port_set_promisc(p); | |
| } else { | |
| /* If the number of auto-ports is <= 1, then all other | |
| * ports will have their output configuration | |
| * statically specified through fdbs. Since ingress | |
| * on the auto-port becomes forwarding/egress to other | |
| * ports and egress configuration is statically known, | |
| * we can say that ingress configuration of the | |
| * auto-port is also statically known. | |
| * This lets us disable promiscuous mode and write | |
| * this config to hw. | |
| */ | |
| if (br->auto_cnt == 0 || | |
| (br->auto_cnt == 1 && br_auto_port(p))) | |
| br_port_clear_promisc(p); | |
| else | |
| br_port_set_promisc(p); | |
| } | |
| } | |
| } | |
| static void nbp_update_port_count(struct net_bridge *br) | |
| { | |
| struct net_bridge_port *p; | |
| u32 cnt = 0; | |
| list_for_each_entry(p, &br->port_list, list) { | |
| if (br_auto_port(p)) | |
| cnt++; | |
| } | |
| if (br->auto_cnt != cnt) { | |
| br->auto_cnt = cnt; | |
| br_manage_promisc(br); | |
| } | |
| } | |
| static void nbp_delete_promisc(struct net_bridge_port *p) | |
| { | |
| /* If port is currently promiscuous, unset promiscuity. | |
| * Otherwise, it is a static port so remove all addresses | |
| * from it. | |
| */ | |
| dev_set_allmulti(p->dev, -1); | |
| if (br_promisc_port(p)) | |
| dev_set_promiscuity(p->dev, -1); | |
| else | |
| br_fdb_unsync_static(p->br, p); | |
| } | |
| static void release_nbp(struct kobject *kobj) | |
| { | |
| struct net_bridge_port *p | |
| = container_of(kobj, struct net_bridge_port, kobj); | |
| kfree(p); | |
| } | |
| static struct kobj_type brport_ktype = { | |
| #ifdef CONFIG_SYSFS | |
| .sysfs_ops = &brport_sysfs_ops, | |
| #endif | |
| .release = release_nbp, | |
| }; | |
| static void destroy_nbp(struct net_bridge_port *p) | |
| { | |
| struct net_device *dev = p->dev; | |
| p->br = NULL; | |
| p->dev = NULL; | |
| dev_put(dev); | |
| kobject_put(&p->kobj); | |
| } | |
| static void destroy_nbp_rcu(struct rcu_head *head) | |
| { | |
| struct net_bridge_port *p = | |
| container_of(head, struct net_bridge_port, rcu); | |
| destroy_nbp(p); | |
| } | |
| /* Delete port(interface) from bridge is done in two steps. | |
| * via RCU. First step, marks device as down. That deletes | |
| * all the timers and stops new packets from flowing through. | |
| * | |
| * Final cleanup doesn't occur until after all CPU's finished | |
| * processing packets. | |
| * | |
| * Protected from multiple admin operations by RTNL mutex | |
| */ | |
| static void del_nbp(struct net_bridge_port *p) | |
| { | |
| struct net_bridge *br = p->br; | |
| struct net_device *dev = p->dev; | |
| sysfs_remove_link(br->ifobj, p->dev->name); | |
| nbp_delete_promisc(p); | |
| spin_lock_bh(&br->lock); | |
| br_stp_disable_port(p); | |
| spin_unlock_bh(&br->lock); | |
| br_ifinfo_notify(RTM_DELLINK, p); | |
| list_del_rcu(&p->list); | |
| nbp_vlan_flush(p); | |
| br_fdb_delete_by_port(br, p, 0, 1); | |
| nbp_update_port_count(br); | |
| netdev_upper_dev_unlink(dev, br->dev); | |
| dev->priv_flags &= ~IFF_BRIDGE_PORT; | |
| netdev_rx_handler_unregister(dev); | |
| br_multicast_del_port(p); | |
| kobject_uevent(&p->kobj, KOBJ_REMOVE); | |
| kobject_del(&p->kobj); | |
| br_netpoll_disable(p); | |
| call_rcu(&p->rcu, destroy_nbp_rcu); | |
| } | |
| /* Delete bridge device */ | |
| void br_dev_delete(struct net_device *dev, struct list_head *head) | |
| { | |
| struct net_bridge *br = netdev_priv(dev); | |
| struct net_bridge_port *p, *n; | |
| list_for_each_entry_safe(p, n, &br->port_list, list) { | |
| del_nbp(p); | |
| } | |
| br_fdb_delete_by_port(br, NULL, 0, 1); | |
| br_vlan_flush(br); | |
| br_multicast_dev_del(br); | |
| del_timer_sync(&br->gc_timer); | |
| br_sysfs_delbr(br->dev); | |
| unregister_netdevice_queue(br->dev, head); | |
| } | |
| /* find an available port number */ | |
| static int find_portno(struct net_bridge *br) | |
| { | |
| int index; | |
| struct net_bridge_port *p; | |
| unsigned long *inuse; | |
| inuse = kcalloc(BITS_TO_LONGS(BR_MAX_PORTS), sizeof(unsigned long), | |
| GFP_KERNEL); | |
| if (!inuse) | |
| return -ENOMEM; | |
| set_bit(0, inuse); /* zero is reserved */ | |
| list_for_each_entry(p, &br->port_list, list) { | |
| set_bit(p->port_no, inuse); | |
| } | |
| index = find_first_zero_bit(inuse, BR_MAX_PORTS); | |
| kfree(inuse); | |
| return (index >= BR_MAX_PORTS) ? -EXFULL : index; | |
| } | |
| /* called with RTNL but without bridge lock */ | |
| static struct net_bridge_port *new_nbp(struct net_bridge *br, | |
| struct net_device *dev) | |
| { | |
| int index; | |
| struct net_bridge_port *p; | |
| index = find_portno(br); | |
| if (index < 0) | |
| return ERR_PTR(index); | |
| p = kzalloc(sizeof(*p), GFP_KERNEL); | |
| if (p == NULL) | |
| return ERR_PTR(-ENOMEM); | |
| p->br = br; | |
| dev_hold(dev); | |
| p->dev = dev; | |
| p->path_cost = port_cost(dev); | |
| p->priority = 0x8000 >> BR_PORT_BITS; | |
| p->port_no = index; | |
| p->flags = BR_LEARNING | BR_FLOOD; | |
| br_init_port(p); | |
| br_set_state(p, BR_STATE_DISABLED); | |
| br_stp_port_timer_init(p); | |
| br_multicast_add_port(p); | |
| return p; | |
| } | |
| int br_add_bridge(struct net *net, const char *name) | |
| { | |
| struct net_device *dev; | |
| int res; | |
| dev = alloc_netdev(sizeof(struct net_bridge), name, NET_NAME_UNKNOWN, | |
| br_dev_setup); | |
| if (!dev) | |
| return -ENOMEM; | |
| dev_net_set(dev, net); | |
| dev->rtnl_link_ops = &br_link_ops; | |
| res = register_netdev(dev); | |
| if (res) | |
| free_netdev(dev); | |
| return res; | |
| } | |
| int br_del_bridge(struct net *net, const char *name) | |
| { | |
| struct net_device *dev; | |
| int ret = 0; | |
| rtnl_lock(); | |
| dev = __dev_get_by_name(net, name); | |
| if (dev == NULL) | |
| ret = -ENXIO; /* Could not find device */ | |
| else if (!(dev->priv_flags & IFF_EBRIDGE)) { | |
| /* Attempt to delete non bridge device! */ | |
| ret = -EPERM; | |
| } | |
| else if (dev->flags & IFF_UP) { | |
| /* Not shutdown yet. */ | |
| ret = -EBUSY; | |
| } | |
| else | |
| br_dev_delete(dev, NULL); | |
| rtnl_unlock(); | |
| return ret; | |
| } | |
| /* MTU of the bridge pseudo-device: ETH_DATA_LEN or the minimum of the ports */ | |
| int br_min_mtu(const struct net_bridge *br) | |
| { | |
| const struct net_bridge_port *p; | |
| int mtu = 0; | |
| ASSERT_RTNL(); | |
| if (list_empty(&br->port_list)) | |
| mtu = ETH_DATA_LEN; | |
| else { | |
| list_for_each_entry(p, &br->port_list, list) { | |
| if (!mtu || p->dev->mtu < mtu) | |
| mtu = p->dev->mtu; | |
| } | |
| } | |
| return mtu; | |
| } | |
| /* | |
| * Recomputes features using slave's features | |
| */ | |
| netdev_features_t br_features_recompute(struct net_bridge *br, | |
| netdev_features_t features) | |
| { | |
| struct net_bridge_port *p; | |
| netdev_features_t mask; | |
| if (list_empty(&br->port_list)) | |
| return features; | |
| mask = features; | |
| features &= ~NETIF_F_ONE_FOR_ALL; | |
| list_for_each_entry(p, &br->port_list, list) { | |
| features = netdev_increment_features(features, | |
| p->dev->features, mask); | |
| } | |
| features = netdev_add_tso_features(features, mask); | |
| return features; | |
| } | |
| /* called with RTNL */ | |
| int br_add_if(struct net_bridge *br, struct net_device *dev) | |
| { | |
| struct net_bridge_port *p; | |
| int err = 0; | |
| bool changed_addr; | |
| /* Don't allow bridging non-ethernet like devices, or DSA-enabled | |
| * master network devices since the bridge layer rx_handler prevents | |
| * the DSA fake ethertype handler to be invoked, so we do not strip off | |
| * the DSA switch tag protocol header and the bridge layer just return | |
| * RX_HANDLER_CONSUMED, stopping RX processing for these frames. | |
| */ | |
| if ((dev->flags & IFF_LOOPBACK) || | |
| dev->type != ARPHRD_ETHER || dev->addr_len != ETH_ALEN || | |
| !is_valid_ether_addr(dev->dev_addr) || | |
| netdev_uses_dsa(dev)) | |
| return -EINVAL; | |
| /* No bridging of bridges */ | |
| if (dev->netdev_ops->ndo_start_xmit == br_dev_xmit) | |
| return -ELOOP; | |
| /* Device is already being bridged */ | |
| if (br_port_exists(dev)) | |
| return -EBUSY; | |
| /* No bridging devices that dislike that (e.g. wireless) */ | |
| if (dev->priv_flags & IFF_DONT_BRIDGE) | |
| return -EOPNOTSUPP; | |
| p = new_nbp(br, dev); | |
| if (IS_ERR(p)) | |
| return PTR_ERR(p); | |
| call_netdevice_notifiers(NETDEV_JOIN, dev); | |
| err = dev_set_allmulti(dev, 1); | |
| if (err) | |
| goto put_back; | |
| err = kobject_init_and_add(&p->kobj, &brport_ktype, &(dev->dev.kobj), | |
| SYSFS_BRIDGE_PORT_ATTR); | |
| if (err) | |
| goto err1; | |
| err = br_sysfs_addif(p); | |
| if (err) | |
| goto err2; | |
| err = br_netpoll_enable(p); | |
| if (err) | |
| goto err3; | |
| err = netdev_rx_handler_register(dev, br_handle_frame, p); | |
| if (err) | |
| goto err4; | |
| dev->priv_flags |= IFF_BRIDGE_PORT; | |
| err = netdev_master_upper_dev_link(dev, br->dev); | |
| if (err) | |
| goto err5; | |
| dev_disable_lro(dev); | |
| list_add_rcu(&p->list, &br->port_list); | |
| nbp_update_port_count(br); | |
| netdev_update_features(br->dev); | |
| if (br->dev->needed_headroom < dev->needed_headroom) | |
| br->dev->needed_headroom = dev->needed_headroom; | |
| if (br_fdb_insert(br, p, dev->dev_addr, 0)) | |
| netdev_err(dev, "failed insert local address bridge forwarding table\n"); | |
| if (nbp_vlan_init(p)) | |
| netdev_err(dev, "failed to initialize vlan filtering on this port\n"); | |
| spin_lock_bh(&br->lock); | |
| changed_addr = br_stp_recalculate_bridge_id(br); | |
| if (netif_running(dev) && netif_oper_up(dev) && | |
| (br->dev->flags & IFF_UP)) | |
| br_stp_enable_port(p); | |
| spin_unlock_bh(&br->lock); | |
| br_ifinfo_notify(RTM_NEWLINK, p); | |
| if (changed_addr) | |
| call_netdevice_notifiers(NETDEV_CHANGEADDR, br->dev); | |
| dev_set_mtu(br->dev, br_min_mtu(br)); | |
| kobject_uevent(&p->kobj, KOBJ_ADD); | |
| return 0; | |
| err5: | |
| dev->priv_flags &= ~IFF_BRIDGE_PORT; | |
| netdev_rx_handler_unregister(dev); | |
| err4: | |
| br_netpoll_disable(p); | |
| err3: | |
| sysfs_remove_link(br->ifobj, p->dev->name); | |
| err2: | |
| kobject_put(&p->kobj); | |
| p = NULL; /* kobject_put frees */ | |
| err1: | |
| dev_set_allmulti(dev, -1); | |
| put_back: | |
| dev_put(dev); | |
| kfree(p); | |
| return err; | |
| } | |
| /* called with RTNL */ | |
| int br_del_if(struct net_bridge *br, struct net_device *dev) | |
| { | |
| struct net_bridge_port *p; | |
| bool changed_addr; | |
| p = br_port_get_rtnl(dev); | |
| if (!p || p->br != br) | |
| return -EINVAL; | |
| /* Since more than one interface can be attached to a bridge, | |
| * there still maybe an alternate path for netconsole to use; | |
| * therefore there is no reason for a NETDEV_RELEASE event. | |
| */ | |
| del_nbp(p); | |
| dev_set_mtu(br->dev, br_min_mtu(br)); | |
| spin_lock_bh(&br->lock); | |
| changed_addr = br_stp_recalculate_bridge_id(br); | |
| spin_unlock_bh(&br->lock); | |
| if (changed_addr) | |
| call_netdevice_notifiers(NETDEV_CHANGEADDR, br->dev); | |
| netdev_update_features(br->dev); | |
| return 0; | |
| } | |
| void br_port_flags_change(struct net_bridge_port *p, unsigned long mask) | |
| { | |
| struct net_bridge *br = p->br; | |
| if (mask & BR_AUTO_MASK) | |
| nbp_update_port_count(br); | |
| } |