| /* | |
| * Copyright (C) 2015 Altera Corporation. All rights reserved. | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms and conditions of the GNU General Public License, | |
| * version 2, as published by the Free Software Foundation. | |
| * | |
| * This program is distributed in the hope it will be useful, but WITHOUT | |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or | |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for | |
| * more details. | |
| * | |
| * You should have received a copy of the GNU General Public License along with | |
| * this program. If not, see <http://www.gnu.org/licenses/>. | |
| */ | |
| /dts-v1/; | |
| / { | |
| model = "Altera NiosII Max10"; | |
| compatible = "altr,niosii-max10"; | |
| #address-cells = <1>; | |
| #size-cells = <1>; | |
| cpus { | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| cpu: cpu@0 { | |
| device_type = "cpu"; | |
| compatible = "altr,nios2-1.1"; | |
| reg = <0x00000000>; | |
| interrupt-controller; | |
| #interrupt-cells = <1>; | |
| altr,exception-addr = <0xc8000120>; | |
| altr,fast-tlb-miss-addr = <0xc0000100>; | |
| altr,has-div = <1>; | |
| altr,has-initda = <1>; | |
| altr,has-mmu = <1>; | |
| altr,has-mul = <1>; | |
| altr,implementation = "fast"; | |
| altr,pid-num-bits = <8>; | |
| altr,reset-addr = <0xd4000000>; | |
| altr,tlb-num-entries = <256>; | |
| altr,tlb-num-ways = <16>; | |
| altr,tlb-ptr-sz = <8>; | |
| clock-frequency = <75000000>; | |
| dcache-line-size = <32>; | |
| dcache-size = <32768>; | |
| icache-line-size = <32>; | |
| icache-size = <32768>; | |
| }; | |
| }; | |
| memory { | |
| device_type = "memory"; | |
| reg = <0x08000000 0x08000000>, | |
| <0x00000000 0x00000400>; | |
| }; | |
| sopc0: sopc@0 { | |
| device_type = "soc"; | |
| ranges; | |
| #address-cells = <1>; | |
| #size-cells = <1>; | |
| compatible = "altr,avalon", "simple-bus"; | |
| bus-frequency = <75000000>; | |
| jtag_uart: serial@18001530 { | |
| compatible = "altr,juart-1.0"; | |
| reg = <0x18001530 0x00000008>; | |
| interrupt-parent = <&cpu>; | |
| interrupts = <7>; | |
| }; | |
| a_16550_uart_0: serial@18001600 { | |
| compatible = "altr,16550-FIFO32", "ns16550a"; | |
| reg = <0x18001600 0x00000200>; | |
| interrupt-parent = <&cpu>; | |
| interrupts = <1>; | |
| auto-flow-control = <1>; | |
| clock-frequency = <50000000>; | |
| fifo-size = <32>; | |
| reg-io-width = <4>; | |
| reg-shift = <2>; | |
| }; | |
| sysid: sysid@18001528 { | |
| compatible = "altr,sysid-1.0"; | |
| reg = <0x18001528 0x00000008>; | |
| id = <4207856382>; | |
| timestamp = <1431309290>; | |
| }; | |
| rgmii_0_eth_tse_0: ethernet@400 { | |
| compatible = "altr,tse-msgdma-1.0", "altr,tse-1.0"; | |
| reg = <0x00000400 0x00000400>, | |
| <0x00000820 0x00000020>, | |
| <0x00000800 0x00000020>, | |
| <0x000008c0 0x00000008>, | |
| <0x00000840 0x00000020>, | |
| <0x00000860 0x00000020>; | |
| reg-names = "control_port", "rx_csr", "rx_desc", "rx_resp", "tx_csr", "tx_desc"; | |
| interrupt-parent = <&cpu>; | |
| interrupts = <2 3>; | |
| interrupt-names = "rx_irq", "tx_irq"; | |
| rx-fifo-depth = <8192>; | |
| tx-fifo-depth = <8192>; | |
| address-bits = <48>; | |
| max-frame-size = <1518>; | |
| local-mac-address = [00 00 00 00 00 00]; | |
| altr,has-supplementary-unicast; | |
| altr,enable-sup-addr = <1>; | |
| altr,has-hash-multicast-filter; | |
| altr,enable-hash = <1>; | |
| phy-mode = "rgmii-id"; | |
| phy-handle = <&phy0>; | |
| rgmii_0_eth_tse_0_mdio: mdio { | |
| compatible = "altr,tse-mdio"; | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| phy0: ethernet-phy@0 { | |
| reg = <0>; | |
| device_type = "ethernet-phy"; | |
| }; | |
| }; | |
| }; | |
| enet_pll: clock@0 { | |
| compatible = "altr,pll-1.0"; | |
| #clock-cells = <1>; | |
| enet_pll_c0: enet_pll_c0 { | |
| compatible = "fixed-clock"; | |
| #clock-cells = <0>; | |
| clock-frequency = <125000000>; | |
| clock-output-names = "enet_pll-c0"; | |
| }; | |
| enet_pll_c1: enet_pll_c1 { | |
| compatible = "fixed-clock"; | |
| #clock-cells = <0>; | |
| clock-frequency = <25000000>; | |
| clock-output-names = "enet_pll-c1"; | |
| }; | |
| enet_pll_c2: enet_pll_c2 { | |
| compatible = "fixed-clock"; | |
| #clock-cells = <0>; | |
| clock-frequency = <2500000>; | |
| clock-output-names = "enet_pll-c2"; | |
| }; | |
| }; | |
| sys_pll: clock@1 { | |
| compatible = "altr,pll-1.0"; | |
| #clock-cells = <1>; | |
| sys_pll_c0: sys_pll_c0 { | |
| compatible = "fixed-clock"; | |
| #clock-cells = <0>; | |
| clock-frequency = <100000000>; | |
| clock-output-names = "sys_pll-c0"; | |
| }; | |
| sys_pll_c1: sys_pll_c1 { | |
| compatible = "fixed-clock"; | |
| #clock-cells = <0>; | |
| clock-frequency = <50000000>; | |
| clock-output-names = "sys_pll-c1"; | |
| }; | |
| sys_pll_c2: sys_pll_c2 { | |
| compatible = "fixed-clock"; | |
| #clock-cells = <0>; | |
| clock-frequency = <75000000>; | |
| clock-output-names = "sys_pll-c2"; | |
| }; | |
| }; | |
| sys_clk_timer: timer@18001440 { | |
| compatible = "altr,timer-1.0"; | |
| reg = <0x18001440 0x00000020>; | |
| interrupt-parent = <&cpu>; | |
| interrupts = <0>; | |
| clock-frequency = <75000000>; | |
| }; | |
| led_pio: gpio@180014d0 { | |
| compatible = "altr,pio-1.0"; | |
| reg = <0x180014d0 0x00000010>; | |
| altr,gpio-bank-width = <4>; | |
| resetvalue = <15>; | |
| #gpio-cells = <2>; | |
| gpio-controller; | |
| }; | |
| button_pio: gpio@180014c0 { | |
| compatible = "altr,pio-1.0"; | |
| reg = <0x180014c0 0x00000010>; | |
| interrupt-parent = <&cpu>; | |
| interrupts = <6>; | |
| altr,gpio-bank-width = <3>; | |
| altr,interrupt-type = <2>; | |
| edge_type = <1>; | |
| level_trigger = <0>; | |
| resetvalue = <0>; | |
| #gpio-cells = <2>; | |
| gpio-controller; | |
| }; | |
| sys_clk_timer_1: timer@880 { | |
| compatible = "altr,timer-1.0"; | |
| reg = <0x00000880 0x00000020>; | |
| interrupt-parent = <&cpu>; | |
| interrupts = <5>; | |
| clock-frequency = <75000000>; | |
| }; | |
| fpga_leds: leds { | |
| compatible = "gpio-leds"; | |
| led_fpga0: fpga0 { | |
| label = "fpga_led0"; | |
| gpios = <&led_pio 0 1>; | |
| }; | |
| led_fpga1: fpga1 { | |
| label = "fpga_led1"; | |
| gpios = <&led_pio 1 1>; | |
| }; | |
| led_fpga2: fpga2 { | |
| label = "fpga_led2"; | |
| gpios = <&led_pio 2 1>; | |
| }; | |
| led_fpga3: fpga3 { | |
| label = "fpga_led3"; | |
| gpios = <&led_pio 3 1>; | |
| }; | |
| }; | |
| }; | |
| chosen { | |
| bootargs = "debug console=ttyS0,115200"; | |
| }; | |
| }; |