| /* | |
| * Copyright 2006 Jake Moilanen <moilanen@austin.ibm.com>, IBM Corp. | |
| * Copyright 2006-2007 Michael Ellerman, IBM Corp. | |
| * | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public License | |
| * as published by the Free Software Foundation; version 2 of the | |
| * License. | |
| * | |
| */ | |
| #include <linux/device.h> | |
| #include <linux/irq.h> | |
| #include <linux/msi.h> | |
| #include <asm/rtas.h> | |
| #include <asm/hw_irq.h> | |
| #include <asm/ppc-pci.h> | |
| #include <asm/machdep.h> | |
| #include "pseries.h" | |
| static int query_token, change_token; | |
| #define RTAS_QUERY_FN 0 | |
| #define RTAS_CHANGE_FN 1 | |
| #define RTAS_RESET_FN 2 | |
| #define RTAS_CHANGE_MSI_FN 3 | |
| #define RTAS_CHANGE_MSIX_FN 4 | |
| #define RTAS_CHANGE_32MSI_FN 5 | |
| /* RTAS Helpers */ | |
| static int rtas_change_msi(struct pci_dn *pdn, u32 func, u32 num_irqs) | |
| { | |
| u32 addr, seq_num, rtas_ret[3]; | |
| unsigned long buid; | |
| int rc; | |
| addr = rtas_config_addr(pdn->busno, pdn->devfn, 0); | |
| buid = pdn->phb->buid; | |
| seq_num = 1; | |
| do { | |
| if (func == RTAS_CHANGE_MSI_FN || func == RTAS_CHANGE_MSIX_FN || | |
| func == RTAS_CHANGE_32MSI_FN) | |
| rc = rtas_call(change_token, 6, 4, rtas_ret, addr, | |
| BUID_HI(buid), BUID_LO(buid), | |
| func, num_irqs, seq_num); | |
| else | |
| rc = rtas_call(change_token, 6, 3, rtas_ret, addr, | |
| BUID_HI(buid), BUID_LO(buid), | |
| func, num_irqs, seq_num); | |
| seq_num = rtas_ret[1]; | |
| } while (rtas_busy_delay(rc)); | |
| /* | |
| * If the RTAS call succeeded, return the number of irqs allocated. | |
| * If not, make sure we return a negative error code. | |
| */ | |
| if (rc == 0) | |
| rc = rtas_ret[0]; | |
| else if (rc > 0) | |
| rc = -rc; | |
| pr_debug("rtas_msi: ibm,change_msi(func=%d,num=%d), got %d rc = %d\n", | |
| func, num_irqs, rtas_ret[0], rc); | |
| return rc; | |
| } | |
| static void rtas_disable_msi(struct pci_dev *pdev) | |
| { | |
| struct pci_dn *pdn; | |
| pdn = pci_get_pdn(pdev); | |
| if (!pdn) | |
| return; | |
| /* | |
| * disabling MSI with the explicit interface also disables MSI-X | |
| */ | |
| if (rtas_change_msi(pdn, RTAS_CHANGE_MSI_FN, 0) != 0) { | |
| /* | |
| * may have failed because explicit interface is not | |
| * present | |
| */ | |
| if (rtas_change_msi(pdn, RTAS_CHANGE_FN, 0) != 0) { | |
| pr_debug("rtas_msi: Setting MSIs to 0 failed!\n"); | |
| } | |
| } | |
| } | |
| static int rtas_query_irq_number(struct pci_dn *pdn, int offset) | |
| { | |
| u32 addr, rtas_ret[2]; | |
| unsigned long buid; | |
| int rc; | |
| addr = rtas_config_addr(pdn->busno, pdn->devfn, 0); | |
| buid = pdn->phb->buid; | |
| do { | |
| rc = rtas_call(query_token, 4, 3, rtas_ret, addr, | |
| BUID_HI(buid), BUID_LO(buid), offset); | |
| } while (rtas_busy_delay(rc)); | |
| if (rc) { | |
| pr_debug("rtas_msi: error (%d) querying source number\n", rc); | |
| return rc; | |
| } | |
| return rtas_ret[0]; | |
| } | |
| static void rtas_teardown_msi_irqs(struct pci_dev *pdev) | |
| { | |
| struct msi_desc *entry; | |
| for_each_pci_msi_entry(entry, pdev) { | |
| if (entry->irq == NO_IRQ) | |
| continue; | |
| irq_set_msi_desc(entry->irq, NULL); | |
| irq_dispose_mapping(entry->irq); | |
| } | |
| rtas_disable_msi(pdev); | |
| } | |
| static int check_req(struct pci_dev *pdev, int nvec, char *prop_name) | |
| { | |
| struct device_node *dn; | |
| struct pci_dn *pdn; | |
| const __be32 *p; | |
| u32 req_msi; | |
| pdn = pci_get_pdn(pdev); | |
| if (!pdn) | |
| return -ENODEV; | |
| dn = pdn->node; | |
| p = of_get_property(dn, prop_name, NULL); | |
| if (!p) { | |
| pr_debug("rtas_msi: No %s on %s\n", prop_name, dn->full_name); | |
| return -ENOENT; | |
| } | |
| req_msi = be32_to_cpup(p); | |
| if (req_msi < nvec) { | |
| pr_debug("rtas_msi: %s requests < %d MSIs\n", prop_name, nvec); | |
| if (req_msi == 0) /* Be paranoid */ | |
| return -ENOSPC; | |
| return req_msi; | |
| } | |
| return 0; | |
| } | |
| static int check_req_msi(struct pci_dev *pdev, int nvec) | |
| { | |
| return check_req(pdev, nvec, "ibm,req#msi"); | |
| } | |
| static int check_req_msix(struct pci_dev *pdev, int nvec) | |
| { | |
| return check_req(pdev, nvec, "ibm,req#msi-x"); | |
| } | |
| /* Quota calculation */ | |
| static struct device_node *find_pe_total_msi(struct pci_dev *dev, int *total) | |
| { | |
| struct device_node *dn; | |
| const __be32 *p; | |
| dn = of_node_get(pci_device_to_OF_node(dev)); | |
| while (dn) { | |
| p = of_get_property(dn, "ibm,pe-total-#msi", NULL); | |
| if (p) { | |
| pr_debug("rtas_msi: found prop on dn %s\n", | |
| dn->full_name); | |
| *total = be32_to_cpup(p); | |
| return dn; | |
| } | |
| dn = of_get_next_parent(dn); | |
| } | |
| return NULL; | |
| } | |
| static struct device_node *find_pe_dn(struct pci_dev *dev, int *total) | |
| { | |
| struct device_node *dn; | |
| struct pci_dn *pdn; | |
| struct eeh_dev *edev; | |
| /* Found our PE and assume 8 at that point. */ | |
| dn = pci_device_to_OF_node(dev); | |
| if (!dn) | |
| return NULL; | |
| /* Get the top level device in the PE */ | |
| edev = pdn_to_eeh_dev(PCI_DN(dn)); | |
| if (edev->pe) | |
| edev = list_first_entry(&edev->pe->edevs, struct eeh_dev, list); | |
| pdn = eeh_dev_to_pdn(edev); | |
| dn = pdn ? pdn->node : NULL; | |
| if (!dn) | |
| return NULL; | |
| /* We actually want the parent */ | |
| dn = of_get_parent(dn); | |
| if (!dn) | |
| return NULL; | |
| /* Hardcode of 8 for old firmwares */ | |
| *total = 8; | |
| pr_debug("rtas_msi: using PE dn %s\n", dn->full_name); | |
| return dn; | |
| } | |
| struct msi_counts { | |
| struct device_node *requestor; | |
| int num_devices; | |
| int request; | |
| int quota; | |
| int spare; | |
| int over_quota; | |
| }; | |
| static void *count_non_bridge_devices(struct device_node *dn, void *data) | |
| { | |
| struct msi_counts *counts = data; | |
| const __be32 *p; | |
| u32 class; | |
| pr_debug("rtas_msi: counting %s\n", dn->full_name); | |
| p = of_get_property(dn, "class-code", NULL); | |
| class = p ? be32_to_cpup(p) : 0; | |
| if ((class >> 8) != PCI_CLASS_BRIDGE_PCI) | |
| counts->num_devices++; | |
| return NULL; | |
| } | |
| static void *count_spare_msis(struct device_node *dn, void *data) | |
| { | |
| struct msi_counts *counts = data; | |
| const __be32 *p; | |
| int req; | |
| if (dn == counts->requestor) | |
| req = counts->request; | |
| else { | |
| /* We don't know if a driver will try to use MSI or MSI-X, | |
| * so we just have to punt and use the larger of the two. */ | |
| req = 0; | |
| p = of_get_property(dn, "ibm,req#msi", NULL); | |
| if (p) | |
| req = be32_to_cpup(p); | |
| p = of_get_property(dn, "ibm,req#msi-x", NULL); | |
| if (p) | |
| req = max(req, (int)be32_to_cpup(p)); | |
| } | |
| if (req < counts->quota) | |
| counts->spare += counts->quota - req; | |
| else if (req > counts->quota) | |
| counts->over_quota++; | |
| return NULL; | |
| } | |
| static int msi_quota_for_device(struct pci_dev *dev, int request) | |
| { | |
| struct device_node *pe_dn; | |
| struct msi_counts counts; | |
| int total; | |
| pr_debug("rtas_msi: calc quota for %s, request %d\n", pci_name(dev), | |
| request); | |
| pe_dn = find_pe_total_msi(dev, &total); | |
| if (!pe_dn) | |
| pe_dn = find_pe_dn(dev, &total); | |
| if (!pe_dn) { | |
| pr_err("rtas_msi: couldn't find PE for %s\n", pci_name(dev)); | |
| goto out; | |
| } | |
| pr_debug("rtas_msi: found PE %s\n", pe_dn->full_name); | |
| memset(&counts, 0, sizeof(struct msi_counts)); | |
| /* Work out how many devices we have below this PE */ | |
| traverse_pci_devices(pe_dn, count_non_bridge_devices, &counts); | |
| if (counts.num_devices == 0) { | |
| pr_err("rtas_msi: found 0 devices under PE for %s\n", | |
| pci_name(dev)); | |
| goto out; | |
| } | |
| counts.quota = total / counts.num_devices; | |
| if (request <= counts.quota) | |
| goto out; | |
| /* else, we have some more calculating to do */ | |
| counts.requestor = pci_device_to_OF_node(dev); | |
| counts.request = request; | |
| traverse_pci_devices(pe_dn, count_spare_msis, &counts); | |
| /* If the quota isn't an integer multiple of the total, we can | |
| * use the remainder as spare MSIs for anyone that wants them. */ | |
| counts.spare += total % counts.num_devices; | |
| /* Divide any spare by the number of over-quota requestors */ | |
| if (counts.over_quota) | |
| counts.quota += counts.spare / counts.over_quota; | |
| /* And finally clamp the request to the possibly adjusted quota */ | |
| request = min(counts.quota, request); | |
| pr_debug("rtas_msi: request clamped to quota %d\n", request); | |
| out: | |
| of_node_put(pe_dn); | |
| return request; | |
| } | |
| static int check_msix_entries(struct pci_dev *pdev) | |
| { | |
| struct msi_desc *entry; | |
| int expected; | |
| /* There's no way for us to express to firmware that we want | |
| * a discontiguous, or non-zero based, range of MSI-X entries. | |
| * So we must reject such requests. */ | |
| expected = 0; | |
| for_each_pci_msi_entry(entry, pdev) { | |
| if (entry->msi_attrib.entry_nr != expected) { | |
| pr_debug("rtas_msi: bad MSI-X entries.\n"); | |
| return -EINVAL; | |
| } | |
| expected++; | |
| } | |
| return 0; | |
| } | |
| static void rtas_hack_32bit_msi_gen2(struct pci_dev *pdev) | |
| { | |
| u32 addr_hi, addr_lo; | |
| /* | |
| * We should only get in here for IODA1 configs. This is based on the | |
| * fact that we using RTAS for MSIs, we don't have the 32 bit MSI RTAS | |
| * support, and we are in a PCIe Gen2 slot. | |
| */ | |
| dev_info(&pdev->dev, | |
| "rtas_msi: No 32 bit MSI firmware support, forcing 32 bit MSI\n"); | |
| pci_read_config_dword(pdev, pdev->msi_cap + PCI_MSI_ADDRESS_HI, &addr_hi); | |
| addr_lo = 0xffff0000 | ((addr_hi >> (48 - 32)) << 4); | |
| pci_write_config_dword(pdev, pdev->msi_cap + PCI_MSI_ADDRESS_LO, addr_lo); | |
| pci_write_config_dword(pdev, pdev->msi_cap + PCI_MSI_ADDRESS_HI, 0); | |
| } | |
| static int rtas_setup_msi_irqs(struct pci_dev *pdev, int nvec_in, int type) | |
| { | |
| struct pci_dn *pdn; | |
| int hwirq, virq, i, quota, rc; | |
| struct msi_desc *entry; | |
| struct msi_msg msg; | |
| int nvec = nvec_in; | |
| int use_32bit_msi_hack = 0; | |
| if (type == PCI_CAP_ID_MSIX) | |
| rc = check_req_msix(pdev, nvec); | |
| else | |
| rc = check_req_msi(pdev, nvec); | |
| if (rc) | |
| return rc; | |
| quota = msi_quota_for_device(pdev, nvec); | |
| if (quota && quota < nvec) | |
| return quota; | |
| if (type == PCI_CAP_ID_MSIX && check_msix_entries(pdev)) | |
| return -EINVAL; | |
| /* | |
| * Firmware currently refuse any non power of two allocation | |
| * so we round up if the quota will allow it. | |
| */ | |
| if (type == PCI_CAP_ID_MSIX) { | |
| int m = roundup_pow_of_two(nvec); | |
| quota = msi_quota_for_device(pdev, m); | |
| if (quota >= m) | |
| nvec = m; | |
| } | |
| pdn = pci_get_pdn(pdev); | |
| /* | |
| * Try the new more explicit firmware interface, if that fails fall | |
| * back to the old interface. The old interface is known to never | |
| * return MSI-Xs. | |
| */ | |
| again: | |
| if (type == PCI_CAP_ID_MSI) { | |
| if (pdev->no_64bit_msi) { | |
| rc = rtas_change_msi(pdn, RTAS_CHANGE_32MSI_FN, nvec); | |
| if (rc < 0) { | |
| /* | |
| * We only want to run the 32 bit MSI hack below if | |
| * the max bus speed is Gen2 speed | |
| */ | |
| if (pdev->bus->max_bus_speed != PCIE_SPEED_5_0GT) | |
| return rc; | |
| use_32bit_msi_hack = 1; | |
| } | |
| } else | |
| rc = -1; | |
| if (rc < 0) | |
| rc = rtas_change_msi(pdn, RTAS_CHANGE_MSI_FN, nvec); | |
| if (rc < 0) { | |
| pr_debug("rtas_msi: trying the old firmware call.\n"); | |
| rc = rtas_change_msi(pdn, RTAS_CHANGE_FN, nvec); | |
| } | |
| if (use_32bit_msi_hack && rc > 0) | |
| rtas_hack_32bit_msi_gen2(pdev); | |
| } else | |
| rc = rtas_change_msi(pdn, RTAS_CHANGE_MSIX_FN, nvec); | |
| if (rc != nvec) { | |
| if (nvec != nvec_in) { | |
| nvec = nvec_in; | |
| goto again; | |
| } | |
| pr_debug("rtas_msi: rtas_change_msi() failed\n"); | |
| return rc; | |
| } | |
| i = 0; | |
| for_each_pci_msi_entry(entry, pdev) { | |
| hwirq = rtas_query_irq_number(pdn, i++); | |
| if (hwirq < 0) { | |
| pr_debug("rtas_msi: error (%d) getting hwirq\n", rc); | |
| return hwirq; | |
| } | |
| virq = irq_create_mapping(NULL, hwirq); | |
| if (virq == NO_IRQ) { | |
| pr_debug("rtas_msi: Failed mapping hwirq %d\n", hwirq); | |
| return -ENOSPC; | |
| } | |
| dev_dbg(&pdev->dev, "rtas_msi: allocated virq %d\n", virq); | |
| irq_set_msi_desc(virq, entry); | |
| /* Read config space back so we can restore after reset */ | |
| __pci_read_msi_msg(entry, &msg); | |
| entry->msg = msg; | |
| } | |
| return 0; | |
| } | |
| static void rtas_msi_pci_irq_fixup(struct pci_dev *pdev) | |
| { | |
| /* No LSI -> leave MSIs (if any) configured */ | |
| if (pdev->irq == NO_IRQ) { | |
| dev_dbg(&pdev->dev, "rtas_msi: no LSI, nothing to do.\n"); | |
| return; | |
| } | |
| /* No MSI -> MSIs can't have been assigned by fw, leave LSI */ | |
| if (check_req_msi(pdev, 1) && check_req_msix(pdev, 1)) { | |
| dev_dbg(&pdev->dev, "rtas_msi: no req#msi/x, nothing to do.\n"); | |
| return; | |
| } | |
| dev_dbg(&pdev->dev, "rtas_msi: disabling existing MSI.\n"); | |
| rtas_disable_msi(pdev); | |
| } | |
| static int rtas_msi_init(void) | |
| { | |
| struct pci_controller *phb; | |
| query_token = rtas_token("ibm,query-interrupt-source-number"); | |
| change_token = rtas_token("ibm,change-msi"); | |
| if ((query_token == RTAS_UNKNOWN_SERVICE) || | |
| (change_token == RTAS_UNKNOWN_SERVICE)) { | |
| pr_debug("rtas_msi: no RTAS tokens, no MSI support.\n"); | |
| return -1; | |
| } | |
| pr_debug("rtas_msi: Registering RTAS MSI callbacks.\n"); | |
| WARN_ON(pseries_pci_controller_ops.setup_msi_irqs); | |
| pseries_pci_controller_ops.setup_msi_irqs = rtas_setup_msi_irqs; | |
| pseries_pci_controller_ops.teardown_msi_irqs = rtas_teardown_msi_irqs; | |
| list_for_each_entry(phb, &hose_list, list_node) { | |
| WARN_ON(phb->controller_ops.setup_msi_irqs); | |
| phb->controller_ops.setup_msi_irqs = rtas_setup_msi_irqs; | |
| phb->controller_ops.teardown_msi_irqs = rtas_teardown_msi_irqs; | |
| } | |
| WARN_ON(ppc_md.pci_irq_fixup); | |
| ppc_md.pci_irq_fixup = rtas_msi_pci_irq_fixup; | |
| return 0; | |
| } | |
| machine_arch_initcall(pseries, rtas_msi_init); |