| /* | |
| * IBM/AMCC PPC4xx SoC setup code | |
| * | |
| * Copyright 2008 DENX Software Engineering, Stefan Roese <sr@denx.de> | |
| * | |
| * L2 cache routines cloned from arch/ppc/syslib/ibm440gx_common.c which is: | |
| * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net> | |
| * Copyright (c) 2003 - 2006 Zultys Technologies | |
| * | |
| * This program is free software; you can redistribute it and/or modify it | |
| * under the terms of the GNU General Public License as published by the | |
| * Free Software Foundation; either version 2 of the License, or (at your | |
| * option) any later version. | |
| */ | |
| #include <linux/stddef.h> | |
| #include <linux/kernel.h> | |
| #include <linux/init.h> | |
| #include <linux/errno.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/irq.h> | |
| #include <linux/of_irq.h> | |
| #include <linux/of_platform.h> | |
| #include <asm/dcr.h> | |
| #include <asm/dcr-regs.h> | |
| #include <asm/reg.h> | |
| static u32 dcrbase_l2c; | |
| /* | |
| * L2-cache | |
| */ | |
| /* Issue L2C diagnostic command */ | |
| static inline u32 l2c_diag(u32 addr) | |
| { | |
| mtdcr(dcrbase_l2c + DCRN_L2C0_ADDR, addr); | |
| mtdcr(dcrbase_l2c + DCRN_L2C0_CMD, L2C_CMD_DIAG); | |
| while (!(mfdcr(dcrbase_l2c + DCRN_L2C0_SR) & L2C_SR_CC)) | |
| ; | |
| return mfdcr(dcrbase_l2c + DCRN_L2C0_DATA); | |
| } | |
| static irqreturn_t l2c_error_handler(int irq, void *dev) | |
| { | |
| u32 sr = mfdcr(dcrbase_l2c + DCRN_L2C0_SR); | |
| if (sr & L2C_SR_CPE) { | |
| /* Read cache trapped address */ | |
| u32 addr = l2c_diag(0x42000000); | |
| printk(KERN_EMERG "L2C: Cache Parity Error, addr[16:26] = 0x%08x\n", | |
| addr); | |
| } | |
| if (sr & L2C_SR_TPE) { | |
| /* Read tag trapped address */ | |
| u32 addr = l2c_diag(0x82000000) >> 16; | |
| printk(KERN_EMERG "L2C: Tag Parity Error, addr[16:26] = 0x%08x\n", | |
| addr); | |
| } | |
| /* Clear parity errors */ | |
| if (sr & (L2C_SR_CPE | L2C_SR_TPE)){ | |
| mtdcr(dcrbase_l2c + DCRN_L2C0_ADDR, 0); | |
| mtdcr(dcrbase_l2c + DCRN_L2C0_CMD, L2C_CMD_CCP | L2C_CMD_CTE); | |
| } else { | |
| printk(KERN_EMERG "L2C: LRU error\n"); | |
| } | |
| return IRQ_HANDLED; | |
| } | |
| static int __init ppc4xx_l2c_probe(void) | |
| { | |
| struct device_node *np; | |
| u32 r; | |
| unsigned long flags; | |
| int irq; | |
| const u32 *dcrreg; | |
| u32 dcrbase_isram; | |
| int len; | |
| const u32 *prop; | |
| u32 l2_size; | |
| np = of_find_compatible_node(NULL, NULL, "ibm,l2-cache"); | |
| if (!np) | |
| return 0; | |
| /* Get l2 cache size */ | |
| prop = of_get_property(np, "cache-size", NULL); | |
| if (prop == NULL) { | |
| printk(KERN_ERR "%s: Can't get cache-size!\n", np->full_name); | |
| of_node_put(np); | |
| return -ENODEV; | |
| } | |
| l2_size = prop[0]; | |
| /* Map DCRs */ | |
| dcrreg = of_get_property(np, "dcr-reg", &len); | |
| if (!dcrreg || (len != 4 * sizeof(u32))) { | |
| printk(KERN_ERR "%s: Can't get DCR register base !", | |
| np->full_name); | |
| of_node_put(np); | |
| return -ENODEV; | |
| } | |
| dcrbase_isram = dcrreg[0]; | |
| dcrbase_l2c = dcrreg[2]; | |
| /* Get and map irq number from device tree */ | |
| irq = irq_of_parse_and_map(np, 0); | |
| if (irq == NO_IRQ) { | |
| printk(KERN_ERR "irq_of_parse_and_map failed\n"); | |
| of_node_put(np); | |
| return -ENODEV; | |
| } | |
| /* Install error handler */ | |
| if (request_irq(irq, l2c_error_handler, 0, "L2C", 0) < 0) { | |
| printk(KERN_ERR "Cannot install L2C error handler" | |
| ", cache is not enabled\n"); | |
| of_node_put(np); | |
| return -ENODEV; | |
| } | |
| local_irq_save(flags); | |
| asm volatile ("sync" ::: "memory"); | |
| /* Disable SRAM */ | |
| mtdcr(dcrbase_isram + DCRN_SRAM0_DPC, | |
| mfdcr(dcrbase_isram + DCRN_SRAM0_DPC) & ~SRAM_DPC_ENABLE); | |
| mtdcr(dcrbase_isram + DCRN_SRAM0_SB0CR, | |
| mfdcr(dcrbase_isram + DCRN_SRAM0_SB0CR) & ~SRAM_SBCR_BU_MASK); | |
| mtdcr(dcrbase_isram + DCRN_SRAM0_SB1CR, | |
| mfdcr(dcrbase_isram + DCRN_SRAM0_SB1CR) & ~SRAM_SBCR_BU_MASK); | |
| mtdcr(dcrbase_isram + DCRN_SRAM0_SB2CR, | |
| mfdcr(dcrbase_isram + DCRN_SRAM0_SB2CR) & ~SRAM_SBCR_BU_MASK); | |
| mtdcr(dcrbase_isram + DCRN_SRAM0_SB3CR, | |
| mfdcr(dcrbase_isram + DCRN_SRAM0_SB3CR) & ~SRAM_SBCR_BU_MASK); | |
| /* Enable L2_MODE without ICU/DCU */ | |
| r = mfdcr(dcrbase_l2c + DCRN_L2C0_CFG) & | |
| ~(L2C_CFG_ICU | L2C_CFG_DCU | L2C_CFG_SS_MASK); | |
| r |= L2C_CFG_L2M | L2C_CFG_SS_256; | |
| mtdcr(dcrbase_l2c + DCRN_L2C0_CFG, r); | |
| mtdcr(dcrbase_l2c + DCRN_L2C0_ADDR, 0); | |
| /* Hardware Clear Command */ | |
| mtdcr(dcrbase_l2c + DCRN_L2C0_CMD, L2C_CMD_HCC); | |
| while (!(mfdcr(dcrbase_l2c + DCRN_L2C0_SR) & L2C_SR_CC)) | |
| ; | |
| /* Clear Cache Parity and Tag Errors */ | |
| mtdcr(dcrbase_l2c + DCRN_L2C0_CMD, L2C_CMD_CCP | L2C_CMD_CTE); | |
| /* Enable 64G snoop region starting at 0 */ | |
| r = mfdcr(dcrbase_l2c + DCRN_L2C0_SNP0) & | |
| ~(L2C_SNP_BA_MASK | L2C_SNP_SSR_MASK); | |
| r |= L2C_SNP_SSR_32G | L2C_SNP_ESR; | |
| mtdcr(dcrbase_l2c + DCRN_L2C0_SNP0, r); | |
| r = mfdcr(dcrbase_l2c + DCRN_L2C0_SNP1) & | |
| ~(L2C_SNP_BA_MASK | L2C_SNP_SSR_MASK); | |
| r |= 0x80000000 | L2C_SNP_SSR_32G | L2C_SNP_ESR; | |
| mtdcr(dcrbase_l2c + DCRN_L2C0_SNP1, r); | |
| asm volatile ("sync" ::: "memory"); | |
| /* Enable ICU/DCU ports */ | |
| r = mfdcr(dcrbase_l2c + DCRN_L2C0_CFG); | |
| r &= ~(L2C_CFG_DCW_MASK | L2C_CFG_PMUX_MASK | L2C_CFG_PMIM | |
| | L2C_CFG_TPEI | L2C_CFG_CPEI | L2C_CFG_NAM | L2C_CFG_NBRM); | |
| r |= L2C_CFG_ICU | L2C_CFG_DCU | L2C_CFG_TPC | L2C_CFG_CPC | L2C_CFG_FRAN | |
| | L2C_CFG_CPIM | L2C_CFG_TPIM | L2C_CFG_LIM | L2C_CFG_SMCM; | |
| /* Check for 460EX/GT special handling */ | |
| if (of_device_is_compatible(np, "ibm,l2-cache-460ex") || | |
| of_device_is_compatible(np, "ibm,l2-cache-460gt")) | |
| r |= L2C_CFG_RDBW; | |
| mtdcr(dcrbase_l2c + DCRN_L2C0_CFG, r); | |
| asm volatile ("sync; isync" ::: "memory"); | |
| local_irq_restore(flags); | |
| printk(KERN_INFO "%dk L2-cache enabled\n", l2_size >> 10); | |
| of_node_put(np); | |
| return 0; | |
| } | |
| arch_initcall(ppc4xx_l2c_probe); | |
| /* | |
| * Apply a system reset. Alternatively a board specific value may be | |
| * provided via the "reset-type" property in the cpu node. | |
| */ | |
| void ppc4xx_reset_system(char *cmd) | |
| { | |
| struct device_node *np; | |
| u32 reset_type = DBCR0_RST_SYSTEM; | |
| const u32 *prop; | |
| np = of_find_node_by_type(NULL, "cpu"); | |
| if (np) { | |
| prop = of_get_property(np, "reset-type", NULL); | |
| /* | |
| * Check if property exists and if it is in range: | |
| * 1 - PPC4xx core reset | |
| * 2 - PPC4xx chip reset | |
| * 3 - PPC4xx system reset (default) | |
| */ | |
| if ((prop) && ((prop[0] >= 1) && (prop[0] <= 3))) | |
| reset_type = prop[0] << 28; | |
| } | |
| mtspr(SPRN_DBCR0, mfspr(SPRN_DBCR0) | reset_type); | |
| while (1) | |
| ; /* Just in case the reset doesn't work */ | |
| } |