| /* | |
| * user-mode-linux networking multicast transport | |
| * Copyright (C) 2001 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com) | |
| * Copyright (C) 2001 by Harald Welte <laforge@gnumonks.org> | |
| * | |
| * based on the existing uml-networking code, which is | |
| * Copyright (C) 2001 Lennert Buytenhek (buytenh@gnu.org) and | |
| * James Leu (jleu@mindspring.net). | |
| * Copyright (C) 2001 by various other people who didn't put their name here. | |
| * | |
| * Licensed under the GPL. | |
| * | |
| */ | |
| #include <unistd.h> | |
| #include <errno.h> | |
| #include <netinet/in.h> | |
| #include "umcast.h" | |
| #include <net_user.h> | |
| #include <um_malloc.h> | |
| static struct sockaddr_in *new_addr(char *addr, unsigned short port) | |
| { | |
| struct sockaddr_in *sin; | |
| sin = uml_kmalloc(sizeof(struct sockaddr_in), UM_GFP_KERNEL); | |
| if (sin == NULL) { | |
| printk(UM_KERN_ERR "new_addr: allocation of sockaddr_in " | |
| "failed\n"); | |
| return NULL; | |
| } | |
| sin->sin_family = AF_INET; | |
| if (addr) | |
| sin->sin_addr.s_addr = in_aton(addr); | |
| else | |
| sin->sin_addr.s_addr = INADDR_ANY; | |
| sin->sin_port = htons(port); | |
| return sin; | |
| } | |
| static int umcast_user_init(void *data, void *dev) | |
| { | |
| struct umcast_data *pri = data; | |
| pri->remote_addr = new_addr(pri->addr, pri->rport); | |
| if (pri->unicast) | |
| pri->listen_addr = new_addr(NULL, pri->lport); | |
| else | |
| pri->listen_addr = pri->remote_addr; | |
| pri->dev = dev; | |
| return 0; | |
| } | |
| static void umcast_remove(void *data) | |
| { | |
| struct umcast_data *pri = data; | |
| kfree(pri->listen_addr); | |
| if (pri->unicast) | |
| kfree(pri->remote_addr); | |
| pri->listen_addr = pri->remote_addr = NULL; | |
| } | |
| static int umcast_open(void *data) | |
| { | |
| struct umcast_data *pri = data; | |
| struct sockaddr_in *lsin = pri->listen_addr; | |
| struct sockaddr_in *rsin = pri->remote_addr; | |
| struct ip_mreq mreq; | |
| int fd, yes = 1, err = -EINVAL; | |
| if ((!pri->unicast && lsin->sin_addr.s_addr == 0) || | |
| (rsin->sin_addr.s_addr == 0) || | |
| (lsin->sin_port == 0) || (rsin->sin_port == 0)) | |
| goto out; | |
| fd = socket(AF_INET, SOCK_DGRAM, 0); | |
| if (fd < 0) { | |
| err = -errno; | |
| printk(UM_KERN_ERR "umcast_open : data socket failed, " | |
| "errno = %d\n", errno); | |
| goto out; | |
| } | |
| if (setsockopt(fd, SOL_SOCKET, SO_REUSEADDR, &yes, sizeof(yes)) < 0) { | |
| err = -errno; | |
| printk(UM_KERN_ERR "umcast_open: SO_REUSEADDR failed, " | |
| "errno = %d\n", errno); | |
| goto out_close; | |
| } | |
| if (!pri->unicast) { | |
| /* set ttl according to config */ | |
| if (setsockopt(fd, SOL_IP, IP_MULTICAST_TTL, &pri->ttl, | |
| sizeof(pri->ttl)) < 0) { | |
| err = -errno; | |
| printk(UM_KERN_ERR "umcast_open: IP_MULTICAST_TTL " | |
| "failed, error = %d\n", errno); | |
| goto out_close; | |
| } | |
| /* set LOOP, so data does get fed back to local sockets */ | |
| if (setsockopt(fd, SOL_IP, IP_MULTICAST_LOOP, | |
| &yes, sizeof(yes)) < 0) { | |
| err = -errno; | |
| printk(UM_KERN_ERR "umcast_open: IP_MULTICAST_LOOP " | |
| "failed, error = %d\n", errno); | |
| goto out_close; | |
| } | |
| } | |
| /* bind socket to the address */ | |
| if (bind(fd, (struct sockaddr *) lsin, sizeof(*lsin)) < 0) { | |
| err = -errno; | |
| printk(UM_KERN_ERR "umcast_open : data bind failed, " | |
| "errno = %d\n", errno); | |
| goto out_close; | |
| } | |
| if (!pri->unicast) { | |
| /* subscribe to the multicast group */ | |
| mreq.imr_multiaddr.s_addr = lsin->sin_addr.s_addr; | |
| mreq.imr_interface.s_addr = 0; | |
| if (setsockopt(fd, SOL_IP, IP_ADD_MEMBERSHIP, | |
| &mreq, sizeof(mreq)) < 0) { | |
| err = -errno; | |
| printk(UM_KERN_ERR "umcast_open: IP_ADD_MEMBERSHIP " | |
| "failed, error = %d\n", errno); | |
| printk(UM_KERN_ERR "There appears not to be a " | |
| "multicast-capable network interface on the " | |
| "host.\n"); | |
| printk(UM_KERN_ERR "eth0 should be configured in order " | |
| "to use the multicast transport.\n"); | |
| goto out_close; | |
| } | |
| } | |
| return fd; | |
| out_close: | |
| close(fd); | |
| out: | |
| return err; | |
| } | |
| static void umcast_close(int fd, void *data) | |
| { | |
| struct umcast_data *pri = data; | |
| if (!pri->unicast) { | |
| struct ip_mreq mreq; | |
| struct sockaddr_in *lsin = pri->listen_addr; | |
| mreq.imr_multiaddr.s_addr = lsin->sin_addr.s_addr; | |
| mreq.imr_interface.s_addr = 0; | |
| if (setsockopt(fd, SOL_IP, IP_DROP_MEMBERSHIP, | |
| &mreq, sizeof(mreq)) < 0) { | |
| printk(UM_KERN_ERR "umcast_close: IP_DROP_MEMBERSHIP " | |
| "failed, error = %d\n", errno); | |
| } | |
| } | |
| close(fd); | |
| } | |
| int umcast_user_write(int fd, void *buf, int len, struct umcast_data *pri) | |
| { | |
| struct sockaddr_in *data_addr = pri->remote_addr; | |
| return net_sendto(fd, buf, len, data_addr, sizeof(*data_addr)); | |
| } | |
| const struct net_user_info umcast_user_info = { | |
| .init = umcast_user_init, | |
| .open = umcast_open, | |
| .close = umcast_close, | |
| .remove = umcast_remove, | |
| .add_address = NULL, | |
| .delete_address = NULL, | |
| .mtu = ETH_MAX_PACKET, | |
| .max_packet = ETH_MAX_PACKET + ETH_HEADER_OTHER, | |
| }; |