| #ifndef _ASM_X86_MMU_CONTEXT_H | |
| #define _ASM_X86_MMU_CONTEXT_H | |
| #include <asm/desc.h> | |
| #include <linux/atomic.h> | |
| #include <linux/mm_types.h> | |
| #include <trace/events/tlb.h> | |
| #include <asm/pgalloc.h> | |
| #include <asm/tlbflush.h> | |
| #include <asm/paravirt.h> | |
| #include <asm/mpx.h> | |
| #ifndef CONFIG_PARAVIRT | |
| static inline void paravirt_activate_mm(struct mm_struct *prev, | |
| struct mm_struct *next) | |
| { | |
| } | |
| #endif /* !CONFIG_PARAVIRT */ | |
| #ifdef CONFIG_PERF_EVENTS | |
| extern struct static_key rdpmc_always_available; | |
| static inline void load_mm_cr4(struct mm_struct *mm) | |
| { | |
| if (static_key_false(&rdpmc_always_available) || | |
| atomic_read(&mm->context.perf_rdpmc_allowed)) | |
| cr4_set_bits(X86_CR4_PCE); | |
| else | |
| cr4_clear_bits(X86_CR4_PCE); | |
| } | |
| #else | |
| static inline void load_mm_cr4(struct mm_struct *mm) {} | |
| #endif | |
| #ifdef CONFIG_MODIFY_LDT_SYSCALL | |
| /* | |
| * ldt_structs can be allocated, used, and freed, but they are never | |
| * modified while live. | |
| */ | |
| struct ldt_struct { | |
| /* | |
| * Xen requires page-aligned LDTs with special permissions. This is | |
| * needed to prevent us from installing evil descriptors such as | |
| * call gates. On native, we could merge the ldt_struct and LDT | |
| * allocations, but it's not worth trying to optimize. | |
| */ | |
| struct desc_struct *entries; | |
| int size; | |
| }; | |
| /* | |
| * Used for LDT copy/destruction. | |
| */ | |
| int init_new_context(struct task_struct *tsk, struct mm_struct *mm); | |
| void destroy_context(struct mm_struct *mm); | |
| #else /* CONFIG_MODIFY_LDT_SYSCALL */ | |
| static inline int init_new_context(struct task_struct *tsk, | |
| struct mm_struct *mm) | |
| { | |
| return 0; | |
| } | |
| static inline void destroy_context(struct mm_struct *mm) {} | |
| #endif | |
| static inline void load_mm_ldt(struct mm_struct *mm) | |
| { | |
| #ifdef CONFIG_MODIFY_LDT_SYSCALL | |
| struct ldt_struct *ldt; | |
| /* lockless_dereference synchronizes with smp_store_release */ | |
| ldt = lockless_dereference(mm->context.ldt); | |
| /* | |
| * Any change to mm->context.ldt is followed by an IPI to all | |
| * CPUs with the mm active. The LDT will not be freed until | |
| * after the IPI is handled by all such CPUs. This means that, | |
| * if the ldt_struct changes before we return, the values we see | |
| * will be safe, and the new values will be loaded before we run | |
| * any user code. | |
| * | |
| * NB: don't try to convert this to use RCU without extreme care. | |
| * We would still need IRQs off, because we don't want to change | |
| * the local LDT after an IPI loaded a newer value than the one | |
| * that we can see. | |
| */ | |
| if (unlikely(ldt)) | |
| set_ldt(ldt->entries, ldt->size); | |
| else | |
| clear_LDT(); | |
| #else | |
| clear_LDT(); | |
| #endif | |
| DEBUG_LOCKS_WARN_ON(preemptible()); | |
| } | |
| static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk) | |
| { | |
| #ifdef CONFIG_SMP | |
| if (this_cpu_read(cpu_tlbstate.state) == TLBSTATE_OK) | |
| this_cpu_write(cpu_tlbstate.state, TLBSTATE_LAZY); | |
| #endif | |
| } | |
| static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, | |
| struct task_struct *tsk) | |
| { | |
| unsigned cpu = smp_processor_id(); | |
| if (likely(prev != next)) { | |
| #ifdef CONFIG_SMP | |
| this_cpu_write(cpu_tlbstate.state, TLBSTATE_OK); | |
| this_cpu_write(cpu_tlbstate.active_mm, next); | |
| #endif | |
| cpumask_set_cpu(cpu, mm_cpumask(next)); | |
| /* Re-load page tables */ | |
| load_cr3(next->pgd); | |
| trace_tlb_flush(TLB_FLUSH_ON_TASK_SWITCH, TLB_FLUSH_ALL); | |
| /* Stop flush ipis for the previous mm */ | |
| cpumask_clear_cpu(cpu, mm_cpumask(prev)); | |
| /* Load per-mm CR4 state */ | |
| load_mm_cr4(next); | |
| #ifdef CONFIG_MODIFY_LDT_SYSCALL | |
| /* | |
| * Load the LDT, if the LDT is different. | |
| * | |
| * It's possible that prev->context.ldt doesn't match | |
| * the LDT register. This can happen if leave_mm(prev) | |
| * was called and then modify_ldt changed | |
| * prev->context.ldt but suppressed an IPI to this CPU. | |
| * In this case, prev->context.ldt != NULL, because we | |
| * never set context.ldt to NULL while the mm still | |
| * exists. That means that next->context.ldt != | |
| * prev->context.ldt, because mms never share an LDT. | |
| */ | |
| if (unlikely(prev->context.ldt != next->context.ldt)) | |
| load_mm_ldt(next); | |
| #endif | |
| } | |
| #ifdef CONFIG_SMP | |
| else { | |
| this_cpu_write(cpu_tlbstate.state, TLBSTATE_OK); | |
| BUG_ON(this_cpu_read(cpu_tlbstate.active_mm) != next); | |
| if (!cpumask_test_cpu(cpu, mm_cpumask(next))) { | |
| /* | |
| * On established mms, the mm_cpumask is only changed | |
| * from irq context, from ptep_clear_flush() while in | |
| * lazy tlb mode, and here. Irqs are blocked during | |
| * schedule, protecting us from simultaneous changes. | |
| */ | |
| cpumask_set_cpu(cpu, mm_cpumask(next)); | |
| /* | |
| * We were in lazy tlb mode and leave_mm disabled | |
| * tlb flush IPI delivery. We must reload CR3 | |
| * to make sure to use no freed page tables. | |
| */ | |
| load_cr3(next->pgd); | |
| trace_tlb_flush(TLB_FLUSH_ON_TASK_SWITCH, TLB_FLUSH_ALL); | |
| load_mm_cr4(next); | |
| load_mm_ldt(next); | |
| } | |
| } | |
| #endif | |
| } | |
| #define activate_mm(prev, next) \ | |
| do { \ | |
| paravirt_activate_mm((prev), (next)); \ | |
| switch_mm((prev), (next), NULL); \ | |
| } while (0); | |
| #ifdef CONFIG_X86_32 | |
| #define deactivate_mm(tsk, mm) \ | |
| do { \ | |
| lazy_load_gs(0); \ | |
| } while (0) | |
| #else | |
| #define deactivate_mm(tsk, mm) \ | |
| do { \ | |
| load_gs_index(0); \ | |
| loadsegment(fs, 0); \ | |
| } while (0) | |
| #endif | |
| static inline void arch_dup_mmap(struct mm_struct *oldmm, | |
| struct mm_struct *mm) | |
| { | |
| paravirt_arch_dup_mmap(oldmm, mm); | |
| } | |
| static inline void arch_exit_mmap(struct mm_struct *mm) | |
| { | |
| paravirt_arch_exit_mmap(mm); | |
| } | |
| #ifdef CONFIG_X86_64 | |
| static inline bool is_64bit_mm(struct mm_struct *mm) | |
| { | |
| return !config_enabled(CONFIG_IA32_EMULATION) || | |
| !(mm->context.ia32_compat == TIF_IA32); | |
| } | |
| #else | |
| static inline bool is_64bit_mm(struct mm_struct *mm) | |
| { | |
| return false; | |
| } | |
| #endif | |
| static inline void arch_bprm_mm_init(struct mm_struct *mm, | |
| struct vm_area_struct *vma) | |
| { | |
| mpx_mm_init(mm); | |
| } | |
| static inline void arch_unmap(struct mm_struct *mm, struct vm_area_struct *vma, | |
| unsigned long start, unsigned long end) | |
| { | |
| /* | |
| * mpx_notify_unmap() goes and reads a rarely-hot | |
| * cacheline in the mm_struct. That can be expensive | |
| * enough to be seen in profiles. | |
| * | |
| * The mpx_notify_unmap() call and its contents have been | |
| * observed to affect munmap() performance on hardware | |
| * where MPX is not present. | |
| * | |
| * The unlikely() optimizes for the fast case: no MPX | |
| * in the CPU, or no MPX use in the process. Even if | |
| * we get this wrong (in the unlikely event that MPX | |
| * is widely enabled on some system) the overhead of | |
| * MPX itself (reading bounds tables) is expected to | |
| * overwhelm the overhead of getting this unlikely() | |
| * consistently wrong. | |
| */ | |
| if (unlikely(cpu_feature_enabled(X86_FEATURE_MPX))) | |
| mpx_notify_unmap(mm, vma, start, end); | |
| } | |
| #endif /* _ASM_X86_MMU_CONTEXT_H */ |