| /* | |
| * Copyright 2008 Vitaly Mayatskikh <vmayatsk@redhat.com> | |
| * Copyright 2002 Andi Kleen, SuSE Labs. | |
| * Subject to the GNU Public License v2. | |
| * | |
| * Functions to copy from and to user space. | |
| */ | |
| #include <linux/linkage.h> | |
| #include <asm/current.h> | |
| #include <asm/asm-offsets.h> | |
| #include <asm/thread_info.h> | |
| #include <asm/cpufeature.h> | |
| #include <asm/alternative-asm.h> | |
| #include <asm/asm.h> | |
| #include <asm/smap.h> | |
| /* Standard copy_to_user with segment limit checking */ | |
| ENTRY(_copy_to_user) | |
| GET_THREAD_INFO(%rax) | |
| movq %rdi,%rcx | |
| addq %rdx,%rcx | |
| jc bad_to_user | |
| cmpq TI_addr_limit(%rax),%rcx | |
| ja bad_to_user | |
| ALTERNATIVE_2 "jmp copy_user_generic_unrolled", \ | |
| "jmp copy_user_generic_string", \ | |
| X86_FEATURE_REP_GOOD, \ | |
| "jmp copy_user_enhanced_fast_string", \ | |
| X86_FEATURE_ERMS | |
| ENDPROC(_copy_to_user) | |
| /* Standard copy_from_user with segment limit checking */ | |
| ENTRY(_copy_from_user) | |
| GET_THREAD_INFO(%rax) | |
| movq %rsi,%rcx | |
| addq %rdx,%rcx | |
| jc bad_from_user | |
| cmpq TI_addr_limit(%rax),%rcx | |
| ja bad_from_user | |
| ALTERNATIVE_2 "jmp copy_user_generic_unrolled", \ | |
| "jmp copy_user_generic_string", \ | |
| X86_FEATURE_REP_GOOD, \ | |
| "jmp copy_user_enhanced_fast_string", \ | |
| X86_FEATURE_ERMS | |
| ENDPROC(_copy_from_user) | |
| .section .fixup,"ax" | |
| /* must zero dest */ | |
| ENTRY(bad_from_user) | |
| bad_from_user: | |
| movl %edx,%ecx | |
| xorl %eax,%eax | |
| rep | |
| stosb | |
| bad_to_user: | |
| movl %edx,%eax | |
| ret | |
| ENDPROC(bad_from_user) | |
| .previous | |
| /* | |
| * copy_user_generic_unrolled - memory copy with exception handling. | |
| * This version is for CPUs like P4 that don't have efficient micro | |
| * code for rep movsq | |
| * | |
| * Input: | |
| * rdi destination | |
| * rsi source | |
| * rdx count | |
| * | |
| * Output: | |
| * eax uncopied bytes or 0 if successful. | |
| */ | |
| ENTRY(copy_user_generic_unrolled) | |
| ASM_STAC | |
| cmpl $8,%edx | |
| jb 20f /* less then 8 bytes, go to byte copy loop */ | |
| ALIGN_DESTINATION | |
| movl %edx,%ecx | |
| andl $63,%edx | |
| shrl $6,%ecx | |
| jz 17f | |
| 1: movq (%rsi),%r8 | |
| 2: movq 1*8(%rsi),%r9 | |
| 3: movq 2*8(%rsi),%r10 | |
| 4: movq 3*8(%rsi),%r11 | |
| 5: movq %r8,(%rdi) | |
| 6: movq %r9,1*8(%rdi) | |
| 7: movq %r10,2*8(%rdi) | |
| 8: movq %r11,3*8(%rdi) | |
| 9: movq 4*8(%rsi),%r8 | |
| 10: movq 5*8(%rsi),%r9 | |
| 11: movq 6*8(%rsi),%r10 | |
| 12: movq 7*8(%rsi),%r11 | |
| 13: movq %r8,4*8(%rdi) | |
| 14: movq %r9,5*8(%rdi) | |
| 15: movq %r10,6*8(%rdi) | |
| 16: movq %r11,7*8(%rdi) | |
| leaq 64(%rsi),%rsi | |
| leaq 64(%rdi),%rdi | |
| decl %ecx | |
| jnz 1b | |
| 17: movl %edx,%ecx | |
| andl $7,%edx | |
| shrl $3,%ecx | |
| jz 20f | |
| 18: movq (%rsi),%r8 | |
| 19: movq %r8,(%rdi) | |
| leaq 8(%rsi),%rsi | |
| leaq 8(%rdi),%rdi | |
| decl %ecx | |
| jnz 18b | |
| 20: andl %edx,%edx | |
| jz 23f | |
| movl %edx,%ecx | |
| 21: movb (%rsi),%al | |
| 22: movb %al,(%rdi) | |
| incq %rsi | |
| incq %rdi | |
| decl %ecx | |
| jnz 21b | |
| 23: xor %eax,%eax | |
| ASM_CLAC | |
| ret | |
| .section .fixup,"ax" | |
| 30: shll $6,%ecx | |
| addl %ecx,%edx | |
| jmp 60f | |
| 40: leal (%rdx,%rcx,8),%edx | |
| jmp 60f | |
| 50: movl %ecx,%edx | |
| 60: jmp copy_user_handle_tail /* ecx is zerorest also */ | |
| .previous | |
| _ASM_EXTABLE(1b,30b) | |
| _ASM_EXTABLE(2b,30b) | |
| _ASM_EXTABLE(3b,30b) | |
| _ASM_EXTABLE(4b,30b) | |
| _ASM_EXTABLE(5b,30b) | |
| _ASM_EXTABLE(6b,30b) | |
| _ASM_EXTABLE(7b,30b) | |
| _ASM_EXTABLE(8b,30b) | |
| _ASM_EXTABLE(9b,30b) | |
| _ASM_EXTABLE(10b,30b) | |
| _ASM_EXTABLE(11b,30b) | |
| _ASM_EXTABLE(12b,30b) | |
| _ASM_EXTABLE(13b,30b) | |
| _ASM_EXTABLE(14b,30b) | |
| _ASM_EXTABLE(15b,30b) | |
| _ASM_EXTABLE(16b,30b) | |
| _ASM_EXTABLE(18b,40b) | |
| _ASM_EXTABLE(19b,40b) | |
| _ASM_EXTABLE(21b,50b) | |
| _ASM_EXTABLE(22b,50b) | |
| ENDPROC(copy_user_generic_unrolled) | |
| /* Some CPUs run faster using the string copy instructions. | |
| * This is also a lot simpler. Use them when possible. | |
| * | |
| * Only 4GB of copy is supported. This shouldn't be a problem | |
| * because the kernel normally only writes from/to page sized chunks | |
| * even if user space passed a longer buffer. | |
| * And more would be dangerous because both Intel and AMD have | |
| * errata with rep movsq > 4GB. If someone feels the need to fix | |
| * this please consider this. | |
| * | |
| * Input: | |
| * rdi destination | |
| * rsi source | |
| * rdx count | |
| * | |
| * Output: | |
| * eax uncopied bytes or 0 if successful. | |
| */ | |
| ENTRY(copy_user_generic_string) | |
| ASM_STAC | |
| cmpl $8,%edx | |
| jb 2f /* less than 8 bytes, go to byte copy loop */ | |
| ALIGN_DESTINATION | |
| movl %edx,%ecx | |
| shrl $3,%ecx | |
| andl $7,%edx | |
| 1: rep | |
| movsq | |
| 2: movl %edx,%ecx | |
| 3: rep | |
| movsb | |
| xorl %eax,%eax | |
| ASM_CLAC | |
| ret | |
| .section .fixup,"ax" | |
| 11: leal (%rdx,%rcx,8),%ecx | |
| 12: movl %ecx,%edx /* ecx is zerorest also */ | |
| jmp copy_user_handle_tail | |
| .previous | |
| _ASM_EXTABLE(1b,11b) | |
| _ASM_EXTABLE(3b,12b) | |
| ENDPROC(copy_user_generic_string) | |
| /* | |
| * Some CPUs are adding enhanced REP MOVSB/STOSB instructions. | |
| * It's recommended to use enhanced REP MOVSB/STOSB if it's enabled. | |
| * | |
| * Input: | |
| * rdi destination | |
| * rsi source | |
| * rdx count | |
| * | |
| * Output: | |
| * eax uncopied bytes or 0 if successful. | |
| */ | |
| ENTRY(copy_user_enhanced_fast_string) | |
| ASM_STAC | |
| movl %edx,%ecx | |
| 1: rep | |
| movsb | |
| xorl %eax,%eax | |
| ASM_CLAC | |
| ret | |
| .section .fixup,"ax" | |
| 12: movl %ecx,%edx /* ecx is zerorest also */ | |
| jmp copy_user_handle_tail | |
| .previous | |
| _ASM_EXTABLE(1b,12b) | |
| ENDPROC(copy_user_enhanced_fast_string) | |
| /* | |
| * copy_user_nocache - Uncached memory copy with exception handling | |
| * This will force destination/source out of cache for more performance. | |
| */ | |
| ENTRY(__copy_user_nocache) | |
| ASM_STAC | |
| cmpl $8,%edx | |
| jb 20f /* less then 8 bytes, go to byte copy loop */ | |
| ALIGN_DESTINATION | |
| movl %edx,%ecx | |
| andl $63,%edx | |
| shrl $6,%ecx | |
| jz 17f | |
| 1: movq (%rsi),%r8 | |
| 2: movq 1*8(%rsi),%r9 | |
| 3: movq 2*8(%rsi),%r10 | |
| 4: movq 3*8(%rsi),%r11 | |
| 5: movnti %r8,(%rdi) | |
| 6: movnti %r9,1*8(%rdi) | |
| 7: movnti %r10,2*8(%rdi) | |
| 8: movnti %r11,3*8(%rdi) | |
| 9: movq 4*8(%rsi),%r8 | |
| 10: movq 5*8(%rsi),%r9 | |
| 11: movq 6*8(%rsi),%r10 | |
| 12: movq 7*8(%rsi),%r11 | |
| 13: movnti %r8,4*8(%rdi) | |
| 14: movnti %r9,5*8(%rdi) | |
| 15: movnti %r10,6*8(%rdi) | |
| 16: movnti %r11,7*8(%rdi) | |
| leaq 64(%rsi),%rsi | |
| leaq 64(%rdi),%rdi | |
| decl %ecx | |
| jnz 1b | |
| 17: movl %edx,%ecx | |
| andl $7,%edx | |
| shrl $3,%ecx | |
| jz 20f | |
| 18: movq (%rsi),%r8 | |
| 19: movnti %r8,(%rdi) | |
| leaq 8(%rsi),%rsi | |
| leaq 8(%rdi),%rdi | |
| decl %ecx | |
| jnz 18b | |
| 20: andl %edx,%edx | |
| jz 23f | |
| movl %edx,%ecx | |
| 21: movb (%rsi),%al | |
| 22: movb %al,(%rdi) | |
| incq %rsi | |
| incq %rdi | |
| decl %ecx | |
| jnz 21b | |
| 23: xorl %eax,%eax | |
| ASM_CLAC | |
| sfence | |
| ret | |
| .section .fixup,"ax" | |
| 30: shll $6,%ecx | |
| addl %ecx,%edx | |
| jmp 60f | |
| 40: lea (%rdx,%rcx,8),%rdx | |
| jmp 60f | |
| 50: movl %ecx,%edx | |
| 60: sfence | |
| jmp copy_user_handle_tail | |
| .previous | |
| _ASM_EXTABLE(1b,30b) | |
| _ASM_EXTABLE(2b,30b) | |
| _ASM_EXTABLE(3b,30b) | |
| _ASM_EXTABLE(4b,30b) | |
| _ASM_EXTABLE(5b,30b) | |
| _ASM_EXTABLE(6b,30b) | |
| _ASM_EXTABLE(7b,30b) | |
| _ASM_EXTABLE(8b,30b) | |
| _ASM_EXTABLE(9b,30b) | |
| _ASM_EXTABLE(10b,30b) | |
| _ASM_EXTABLE(11b,30b) | |
| _ASM_EXTABLE(12b,30b) | |
| _ASM_EXTABLE(13b,30b) | |
| _ASM_EXTABLE(14b,30b) | |
| _ASM_EXTABLE(15b,30b) | |
| _ASM_EXTABLE(16b,30b) | |
| _ASM_EXTABLE(18b,40b) | |
| _ASM_EXTABLE(19b,40b) | |
| _ASM_EXTABLE(21b,50b) | |
| _ASM_EXTABLE(22b,50b) | |
| ENDPROC(__copy_user_nocache) |