| /* | |
| * Bluetooth Software UART Qualcomm protocol | |
| * | |
| * HCI_IBS (HCI In-Band Sleep) is Qualcomm's power management | |
| * protocol extension to H4. | |
| * | |
| * Copyright (C) 2007 Texas Instruments, Inc. | |
| * Copyright (c) 2010, 2012 The Linux Foundation. All rights reserved. | |
| * | |
| * Acknowledgements: | |
| * This file is based on hci_ll.c, which was... | |
| * Written by Ohad Ben-Cohen <ohad@bencohen.org> | |
| * which was in turn based on hci_h4.c, which was written | |
| * by Maxim Krasnyansky and Marcel Holtmann. | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License version 2 | |
| * as published by the Free Software Foundation | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA | |
| * | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/debugfs.h> | |
| #include <net/bluetooth/bluetooth.h> | |
| #include <net/bluetooth/hci_core.h> | |
| #include "hci_uart.h" | |
| #include "btqca.h" | |
| /* HCI_IBS protocol messages */ | |
| #define HCI_IBS_SLEEP_IND 0xFE | |
| #define HCI_IBS_WAKE_IND 0xFD | |
| #define HCI_IBS_WAKE_ACK 0xFC | |
| #define HCI_MAX_IBS_SIZE 10 | |
| /* Controller states */ | |
| #define STATE_IN_BAND_SLEEP_ENABLED 1 | |
| #define IBS_WAKE_RETRANS_TIMEOUT_MS 100 | |
| #define IBS_TX_IDLE_TIMEOUT_MS 2000 | |
| #define BAUDRATE_SETTLE_TIMEOUT_MS 300 | |
| /* HCI_IBS transmit side sleep protocol states */ | |
| enum tx_ibs_states { | |
| HCI_IBS_TX_ASLEEP, | |
| HCI_IBS_TX_WAKING, | |
| HCI_IBS_TX_AWAKE, | |
| }; | |
| /* HCI_IBS receive side sleep protocol states */ | |
| enum rx_states { | |
| HCI_IBS_RX_ASLEEP, | |
| HCI_IBS_RX_AWAKE, | |
| }; | |
| /* HCI_IBS transmit and receive side clock state vote */ | |
| enum hci_ibs_clock_state_vote { | |
| HCI_IBS_VOTE_STATS_UPDATE, | |
| HCI_IBS_TX_VOTE_CLOCK_ON, | |
| HCI_IBS_TX_VOTE_CLOCK_OFF, | |
| HCI_IBS_RX_VOTE_CLOCK_ON, | |
| HCI_IBS_RX_VOTE_CLOCK_OFF, | |
| }; | |
| struct qca_data { | |
| struct hci_uart *hu; | |
| struct sk_buff *rx_skb; | |
| struct sk_buff_head txq; | |
| struct sk_buff_head tx_wait_q; /* HCI_IBS wait queue */ | |
| spinlock_t hci_ibs_lock; /* HCI_IBS state lock */ | |
| u8 tx_ibs_state; /* HCI_IBS transmit side power state*/ | |
| u8 rx_ibs_state; /* HCI_IBS receive side power state */ | |
| bool tx_vote; /* Clock must be on for TX */ | |
| bool rx_vote; /* Clock must be on for RX */ | |
| struct timer_list tx_idle_timer; | |
| u32 tx_idle_delay; | |
| struct timer_list wake_retrans_timer; | |
| u32 wake_retrans; | |
| struct workqueue_struct *workqueue; | |
| struct work_struct ws_awake_rx; | |
| struct work_struct ws_awake_device; | |
| struct work_struct ws_rx_vote_off; | |
| struct work_struct ws_tx_vote_off; | |
| unsigned long flags; | |
| /* For debugging purpose */ | |
| u64 ibs_sent_wacks; | |
| u64 ibs_sent_slps; | |
| u64 ibs_sent_wakes; | |
| u64 ibs_recv_wacks; | |
| u64 ibs_recv_slps; | |
| u64 ibs_recv_wakes; | |
| u64 vote_last_jif; | |
| u32 vote_on_ms; | |
| u32 vote_off_ms; | |
| u64 tx_votes_on; | |
| u64 rx_votes_on; | |
| u64 tx_votes_off; | |
| u64 rx_votes_off; | |
| u64 votes_on; | |
| u64 votes_off; | |
| }; | |
| static void __serial_clock_on(struct tty_struct *tty) | |
| { | |
| /* TODO: Some chipset requires to enable UART clock on client | |
| * side to save power consumption or manual work is required. | |
| * Please put your code to control UART clock here if needed | |
| */ | |
| } | |
| static void __serial_clock_off(struct tty_struct *tty) | |
| { | |
| /* TODO: Some chipset requires to disable UART clock on client | |
| * side to save power consumption or manual work is required. | |
| * Please put your code to control UART clock off here if needed | |
| */ | |
| } | |
| /* serial_clock_vote needs to be called with the ibs lock held */ | |
| static void serial_clock_vote(unsigned long vote, struct hci_uart *hu) | |
| { | |
| struct qca_data *qca = hu->priv; | |
| unsigned int diff; | |
| bool old_vote = (qca->tx_vote | qca->rx_vote); | |
| bool new_vote; | |
| switch (vote) { | |
| case HCI_IBS_VOTE_STATS_UPDATE: | |
| diff = jiffies_to_msecs(jiffies - qca->vote_last_jif); | |
| if (old_vote) | |
| qca->vote_off_ms += diff; | |
| else | |
| qca->vote_on_ms += diff; | |
| return; | |
| case HCI_IBS_TX_VOTE_CLOCK_ON: | |
| qca->tx_vote = true; | |
| qca->tx_votes_on++; | |
| new_vote = true; | |
| break; | |
| case HCI_IBS_RX_VOTE_CLOCK_ON: | |
| qca->rx_vote = true; | |
| qca->rx_votes_on++; | |
| new_vote = true; | |
| break; | |
| case HCI_IBS_TX_VOTE_CLOCK_OFF: | |
| qca->tx_vote = false; | |
| qca->tx_votes_off++; | |
| new_vote = qca->rx_vote | qca->tx_vote; | |
| break; | |
| case HCI_IBS_RX_VOTE_CLOCK_OFF: | |
| qca->rx_vote = false; | |
| qca->rx_votes_off++; | |
| new_vote = qca->rx_vote | qca->tx_vote; | |
| break; | |
| default: | |
| BT_ERR("Voting irregularity"); | |
| return; | |
| } | |
| if (new_vote != old_vote) { | |
| if (new_vote) | |
| __serial_clock_on(hu->tty); | |
| else | |
| __serial_clock_off(hu->tty); | |
| BT_DBG("Vote serial clock %s(%s)", new_vote ? "true" : "false", | |
| vote ? "true" : "false"); | |
| diff = jiffies_to_msecs(jiffies - qca->vote_last_jif); | |
| if (new_vote) { | |
| qca->votes_on++; | |
| qca->vote_off_ms += diff; | |
| } else { | |
| qca->votes_off++; | |
| qca->vote_on_ms += diff; | |
| } | |
| qca->vote_last_jif = jiffies; | |
| } | |
| } | |
| /* Builds and sends an HCI_IBS command packet. | |
| * These are very simple packets with only 1 cmd byte. | |
| */ | |
| static int send_hci_ibs_cmd(u8 cmd, struct hci_uart *hu) | |
| { | |
| int err = 0; | |
| struct sk_buff *skb = NULL; | |
| struct qca_data *qca = hu->priv; | |
| BT_DBG("hu %p send hci ibs cmd 0x%x", hu, cmd); | |
| skb = bt_skb_alloc(1, GFP_ATOMIC); | |
| if (!skb) { | |
| BT_ERR("Failed to allocate memory for HCI_IBS packet"); | |
| return -ENOMEM; | |
| } | |
| /* Assign HCI_IBS type */ | |
| *skb_put(skb, 1) = cmd; | |
| skb_queue_tail(&qca->txq, skb); | |
| return err; | |
| } | |
| static void qca_wq_awake_device(struct work_struct *work) | |
| { | |
| struct qca_data *qca = container_of(work, struct qca_data, | |
| ws_awake_device); | |
| struct hci_uart *hu = qca->hu; | |
| unsigned long retrans_delay; | |
| BT_DBG("hu %p wq awake device", hu); | |
| /* Vote for serial clock */ | |
| serial_clock_vote(HCI_IBS_TX_VOTE_CLOCK_ON, hu); | |
| spin_lock(&qca->hci_ibs_lock); | |
| /* Send wake indication to device */ | |
| if (send_hci_ibs_cmd(HCI_IBS_WAKE_IND, hu) < 0) | |
| BT_ERR("Failed to send WAKE to device"); | |
| qca->ibs_sent_wakes++; | |
| /* Start retransmit timer */ | |
| retrans_delay = msecs_to_jiffies(qca->wake_retrans); | |
| mod_timer(&qca->wake_retrans_timer, jiffies + retrans_delay); | |
| spin_unlock(&qca->hci_ibs_lock); | |
| /* Actually send the packets */ | |
| hci_uart_tx_wakeup(hu); | |
| } | |
| static void qca_wq_awake_rx(struct work_struct *work) | |
| { | |
| struct qca_data *qca = container_of(work, struct qca_data, | |
| ws_awake_rx); | |
| struct hci_uart *hu = qca->hu; | |
| BT_DBG("hu %p wq awake rx", hu); | |
| serial_clock_vote(HCI_IBS_RX_VOTE_CLOCK_ON, hu); | |
| spin_lock(&qca->hci_ibs_lock); | |
| qca->rx_ibs_state = HCI_IBS_RX_AWAKE; | |
| /* Always acknowledge device wake up, | |
| * sending IBS message doesn't count as TX ON. | |
| */ | |
| if (send_hci_ibs_cmd(HCI_IBS_WAKE_ACK, hu) < 0) | |
| BT_ERR("Failed to acknowledge device wake up"); | |
| qca->ibs_sent_wacks++; | |
| spin_unlock(&qca->hci_ibs_lock); | |
| /* Actually send the packets */ | |
| hci_uart_tx_wakeup(hu); | |
| } | |
| static void qca_wq_serial_rx_clock_vote_off(struct work_struct *work) | |
| { | |
| struct qca_data *qca = container_of(work, struct qca_data, | |
| ws_rx_vote_off); | |
| struct hci_uart *hu = qca->hu; | |
| BT_DBG("hu %p rx clock vote off", hu); | |
| serial_clock_vote(HCI_IBS_RX_VOTE_CLOCK_OFF, hu); | |
| } | |
| static void qca_wq_serial_tx_clock_vote_off(struct work_struct *work) | |
| { | |
| struct qca_data *qca = container_of(work, struct qca_data, | |
| ws_tx_vote_off); | |
| struct hci_uart *hu = qca->hu; | |
| BT_DBG("hu %p tx clock vote off", hu); | |
| /* Run HCI tx handling unlocked */ | |
| hci_uart_tx_wakeup(hu); | |
| /* Now that message queued to tty driver, vote for tty clocks off. | |
| * It is up to the tty driver to pend the clocks off until tx done. | |
| */ | |
| serial_clock_vote(HCI_IBS_TX_VOTE_CLOCK_OFF, hu); | |
| } | |
| static void hci_ibs_tx_idle_timeout(unsigned long arg) | |
| { | |
| struct hci_uart *hu = (struct hci_uart *)arg; | |
| struct qca_data *qca = hu->priv; | |
| unsigned long flags; | |
| BT_DBG("hu %p idle timeout in %d state", hu, qca->tx_ibs_state); | |
| spin_lock_irqsave_nested(&qca->hci_ibs_lock, | |
| flags, SINGLE_DEPTH_NESTING); | |
| switch (qca->tx_ibs_state) { | |
| case HCI_IBS_TX_AWAKE: | |
| /* TX_IDLE, go to SLEEP */ | |
| if (send_hci_ibs_cmd(HCI_IBS_SLEEP_IND, hu) < 0) { | |
| BT_ERR("Failed to send SLEEP to device"); | |
| break; | |
| } | |
| qca->tx_ibs_state = HCI_IBS_TX_ASLEEP; | |
| qca->ibs_sent_slps++; | |
| queue_work(qca->workqueue, &qca->ws_tx_vote_off); | |
| break; | |
| case HCI_IBS_TX_ASLEEP: | |
| case HCI_IBS_TX_WAKING: | |
| /* Fall through */ | |
| default: | |
| BT_ERR("Spurrious timeout tx state %d", qca->tx_ibs_state); | |
| break; | |
| } | |
| spin_unlock_irqrestore(&qca->hci_ibs_lock, flags); | |
| } | |
| static void hci_ibs_wake_retrans_timeout(unsigned long arg) | |
| { | |
| struct hci_uart *hu = (struct hci_uart *)arg; | |
| struct qca_data *qca = hu->priv; | |
| unsigned long flags, retrans_delay; | |
| bool retransmit = false; | |
| BT_DBG("hu %p wake retransmit timeout in %d state", | |
| hu, qca->tx_ibs_state); | |
| spin_lock_irqsave_nested(&qca->hci_ibs_lock, | |
| flags, SINGLE_DEPTH_NESTING); | |
| switch (qca->tx_ibs_state) { | |
| case HCI_IBS_TX_WAKING: | |
| /* No WAKE_ACK, retransmit WAKE */ | |
| retransmit = true; | |
| if (send_hci_ibs_cmd(HCI_IBS_WAKE_IND, hu) < 0) { | |
| BT_ERR("Failed to acknowledge device wake up"); | |
| break; | |
| } | |
| qca->ibs_sent_wakes++; | |
| retrans_delay = msecs_to_jiffies(qca->wake_retrans); | |
| mod_timer(&qca->wake_retrans_timer, jiffies + retrans_delay); | |
| break; | |
| case HCI_IBS_TX_ASLEEP: | |
| case HCI_IBS_TX_AWAKE: | |
| /* Fall through */ | |
| default: | |
| BT_ERR("Spurrious timeout tx state %d", qca->tx_ibs_state); | |
| break; | |
| } | |
| spin_unlock_irqrestore(&qca->hci_ibs_lock, flags); | |
| if (retransmit) | |
| hci_uart_tx_wakeup(hu); | |
| } | |
| /* Initialize protocol */ | |
| static int qca_open(struct hci_uart *hu) | |
| { | |
| struct qca_data *qca; | |
| BT_DBG("hu %p qca_open", hu); | |
| qca = kzalloc(sizeof(struct qca_data), GFP_ATOMIC); | |
| if (!qca) | |
| return -ENOMEM; | |
| skb_queue_head_init(&qca->txq); | |
| skb_queue_head_init(&qca->tx_wait_q); | |
| spin_lock_init(&qca->hci_ibs_lock); | |
| qca->workqueue = create_singlethread_workqueue("qca_wq"); | |
| if (!qca->workqueue) { | |
| BT_ERR("QCA Workqueue not initialized properly"); | |
| kfree(qca); | |
| return -ENOMEM; | |
| } | |
| INIT_WORK(&qca->ws_awake_rx, qca_wq_awake_rx); | |
| INIT_WORK(&qca->ws_awake_device, qca_wq_awake_device); | |
| INIT_WORK(&qca->ws_rx_vote_off, qca_wq_serial_rx_clock_vote_off); | |
| INIT_WORK(&qca->ws_tx_vote_off, qca_wq_serial_tx_clock_vote_off); | |
| qca->hu = hu; | |
| /* Assume we start with both sides asleep -- extra wakes OK */ | |
| qca->tx_ibs_state = HCI_IBS_TX_ASLEEP; | |
| qca->rx_ibs_state = HCI_IBS_RX_ASLEEP; | |
| /* clocks actually on, but we start votes off */ | |
| qca->tx_vote = false; | |
| qca->rx_vote = false; | |
| qca->flags = 0; | |
| qca->ibs_sent_wacks = 0; | |
| qca->ibs_sent_slps = 0; | |
| qca->ibs_sent_wakes = 0; | |
| qca->ibs_recv_wacks = 0; | |
| qca->ibs_recv_slps = 0; | |
| qca->ibs_recv_wakes = 0; | |
| qca->vote_last_jif = jiffies; | |
| qca->vote_on_ms = 0; | |
| qca->vote_off_ms = 0; | |
| qca->votes_on = 0; | |
| qca->votes_off = 0; | |
| qca->tx_votes_on = 0; | |
| qca->tx_votes_off = 0; | |
| qca->rx_votes_on = 0; | |
| qca->rx_votes_off = 0; | |
| hu->priv = qca; | |
| init_timer(&qca->wake_retrans_timer); | |
| qca->wake_retrans_timer.function = hci_ibs_wake_retrans_timeout; | |
| qca->wake_retrans_timer.data = (u_long)hu; | |
| qca->wake_retrans = IBS_WAKE_RETRANS_TIMEOUT_MS; | |
| init_timer(&qca->tx_idle_timer); | |
| qca->tx_idle_timer.function = hci_ibs_tx_idle_timeout; | |
| qca->tx_idle_timer.data = (u_long)hu; | |
| qca->tx_idle_delay = IBS_TX_IDLE_TIMEOUT_MS; | |
| BT_DBG("HCI_UART_QCA open, tx_idle_delay=%u, wake_retrans=%u", | |
| qca->tx_idle_delay, qca->wake_retrans); | |
| return 0; | |
| } | |
| static void qca_debugfs_init(struct hci_dev *hdev) | |
| { | |
| struct hci_uart *hu = hci_get_drvdata(hdev); | |
| struct qca_data *qca = hu->priv; | |
| struct dentry *ibs_dir; | |
| umode_t mode; | |
| if (!hdev->debugfs) | |
| return; | |
| ibs_dir = debugfs_create_dir("ibs", hdev->debugfs); | |
| /* read only */ | |
| mode = S_IRUGO; | |
| debugfs_create_u8("tx_ibs_state", mode, ibs_dir, &qca->tx_ibs_state); | |
| debugfs_create_u8("rx_ibs_state", mode, ibs_dir, &qca->rx_ibs_state); | |
| debugfs_create_u64("ibs_sent_sleeps", mode, ibs_dir, | |
| &qca->ibs_sent_slps); | |
| debugfs_create_u64("ibs_sent_wakes", mode, ibs_dir, | |
| &qca->ibs_sent_wakes); | |
| debugfs_create_u64("ibs_sent_wake_acks", mode, ibs_dir, | |
| &qca->ibs_sent_wacks); | |
| debugfs_create_u64("ibs_recv_sleeps", mode, ibs_dir, | |
| &qca->ibs_recv_slps); | |
| debugfs_create_u64("ibs_recv_wakes", mode, ibs_dir, | |
| &qca->ibs_recv_wakes); | |
| debugfs_create_u64("ibs_recv_wake_acks", mode, ibs_dir, | |
| &qca->ibs_recv_wacks); | |
| debugfs_create_bool("tx_vote", mode, ibs_dir, &qca->tx_vote); | |
| debugfs_create_u64("tx_votes_on", mode, ibs_dir, &qca->tx_votes_on); | |
| debugfs_create_u64("tx_votes_off", mode, ibs_dir, &qca->tx_votes_off); | |
| debugfs_create_bool("rx_vote", mode, ibs_dir, &qca->rx_vote); | |
| debugfs_create_u64("rx_votes_on", mode, ibs_dir, &qca->rx_votes_on); | |
| debugfs_create_u64("rx_votes_off", mode, ibs_dir, &qca->rx_votes_off); | |
| debugfs_create_u64("votes_on", mode, ibs_dir, &qca->votes_on); | |
| debugfs_create_u64("votes_off", mode, ibs_dir, &qca->votes_off); | |
| debugfs_create_u32("vote_on_ms", mode, ibs_dir, &qca->vote_on_ms); | |
| debugfs_create_u32("vote_off_ms", mode, ibs_dir, &qca->vote_off_ms); | |
| /* read/write */ | |
| mode = S_IRUGO | S_IWUSR; | |
| debugfs_create_u32("wake_retrans", mode, ibs_dir, &qca->wake_retrans); | |
| debugfs_create_u32("tx_idle_delay", mode, ibs_dir, | |
| &qca->tx_idle_delay); | |
| } | |
| /* Flush protocol data */ | |
| static int qca_flush(struct hci_uart *hu) | |
| { | |
| struct qca_data *qca = hu->priv; | |
| BT_DBG("hu %p qca flush", hu); | |
| skb_queue_purge(&qca->tx_wait_q); | |
| skb_queue_purge(&qca->txq); | |
| return 0; | |
| } | |
| /* Close protocol */ | |
| static int qca_close(struct hci_uart *hu) | |
| { | |
| struct qca_data *qca = hu->priv; | |
| BT_DBG("hu %p qca close", hu); | |
| serial_clock_vote(HCI_IBS_VOTE_STATS_UPDATE, hu); | |
| skb_queue_purge(&qca->tx_wait_q); | |
| skb_queue_purge(&qca->txq); | |
| del_timer(&qca->tx_idle_timer); | |
| del_timer(&qca->wake_retrans_timer); | |
| destroy_workqueue(qca->workqueue); | |
| qca->hu = NULL; | |
| kfree_skb(qca->rx_skb); | |
| hu->priv = NULL; | |
| kfree(qca); | |
| return 0; | |
| } | |
| /* Called upon a wake-up-indication from the device. | |
| */ | |
| static void device_want_to_wakeup(struct hci_uart *hu) | |
| { | |
| unsigned long flags; | |
| struct qca_data *qca = hu->priv; | |
| BT_DBG("hu %p want to wake up", hu); | |
| spin_lock_irqsave(&qca->hci_ibs_lock, flags); | |
| qca->ibs_recv_wakes++; | |
| switch (qca->rx_ibs_state) { | |
| case HCI_IBS_RX_ASLEEP: | |
| /* Make sure clock is on - we may have turned clock off since | |
| * receiving the wake up indicator awake rx clock. | |
| */ | |
| queue_work(qca->workqueue, &qca->ws_awake_rx); | |
| spin_unlock_irqrestore(&qca->hci_ibs_lock, flags); | |
| return; | |
| case HCI_IBS_RX_AWAKE: | |
| /* Always acknowledge device wake up, | |
| * sending IBS message doesn't count as TX ON. | |
| */ | |
| if (send_hci_ibs_cmd(HCI_IBS_WAKE_ACK, hu) < 0) { | |
| BT_ERR("Failed to acknowledge device wake up"); | |
| break; | |
| } | |
| qca->ibs_sent_wacks++; | |
| break; | |
| default: | |
| /* Any other state is illegal */ | |
| BT_ERR("Received HCI_IBS_WAKE_IND in rx state %d", | |
| qca->rx_ibs_state); | |
| break; | |
| } | |
| spin_unlock_irqrestore(&qca->hci_ibs_lock, flags); | |
| /* Actually send the packets */ | |
| hci_uart_tx_wakeup(hu); | |
| } | |
| /* Called upon a sleep-indication from the device. | |
| */ | |
| static void device_want_to_sleep(struct hci_uart *hu) | |
| { | |
| unsigned long flags; | |
| struct qca_data *qca = hu->priv; | |
| BT_DBG("hu %p want to sleep", hu); | |
| spin_lock_irqsave(&qca->hci_ibs_lock, flags); | |
| qca->ibs_recv_slps++; | |
| switch (qca->rx_ibs_state) { | |
| case HCI_IBS_RX_AWAKE: | |
| /* Update state */ | |
| qca->rx_ibs_state = HCI_IBS_RX_ASLEEP; | |
| /* Vote off rx clock under workqueue */ | |
| queue_work(qca->workqueue, &qca->ws_rx_vote_off); | |
| break; | |
| case HCI_IBS_RX_ASLEEP: | |
| /* Fall through */ | |
| default: | |
| /* Any other state is illegal */ | |
| BT_ERR("Received HCI_IBS_SLEEP_IND in rx state %d", | |
| qca->rx_ibs_state); | |
| break; | |
| } | |
| spin_unlock_irqrestore(&qca->hci_ibs_lock, flags); | |
| } | |
| /* Called upon wake-up-acknowledgement from the device | |
| */ | |
| static void device_woke_up(struct hci_uart *hu) | |
| { | |
| unsigned long flags, idle_delay; | |
| struct qca_data *qca = hu->priv; | |
| struct sk_buff *skb = NULL; | |
| BT_DBG("hu %p woke up", hu); | |
| spin_lock_irqsave(&qca->hci_ibs_lock, flags); | |
| qca->ibs_recv_wacks++; | |
| switch (qca->tx_ibs_state) { | |
| case HCI_IBS_TX_AWAKE: | |
| /* Expect one if we send 2 WAKEs */ | |
| BT_DBG("Received HCI_IBS_WAKE_ACK in tx state %d", | |
| qca->tx_ibs_state); | |
| break; | |
| case HCI_IBS_TX_WAKING: | |
| /* Send pending packets */ | |
| while ((skb = skb_dequeue(&qca->tx_wait_q))) | |
| skb_queue_tail(&qca->txq, skb); | |
| /* Switch timers and change state to HCI_IBS_TX_AWAKE */ | |
| del_timer(&qca->wake_retrans_timer); | |
| idle_delay = msecs_to_jiffies(qca->tx_idle_delay); | |
| mod_timer(&qca->tx_idle_timer, jiffies + idle_delay); | |
| qca->tx_ibs_state = HCI_IBS_TX_AWAKE; | |
| break; | |
| case HCI_IBS_TX_ASLEEP: | |
| /* Fall through */ | |
| default: | |
| BT_ERR("Received HCI_IBS_WAKE_ACK in tx state %d", | |
| qca->tx_ibs_state); | |
| break; | |
| } | |
| spin_unlock_irqrestore(&qca->hci_ibs_lock, flags); | |
| /* Actually send the packets */ | |
| hci_uart_tx_wakeup(hu); | |
| } | |
| /* Enqueue frame for transmittion (padding, crc, etc) may be called from | |
| * two simultaneous tasklets. | |
| */ | |
| static int qca_enqueue(struct hci_uart *hu, struct sk_buff *skb) | |
| { | |
| unsigned long flags = 0, idle_delay; | |
| struct qca_data *qca = hu->priv; | |
| BT_DBG("hu %p qca enq skb %p tx_ibs_state %d", hu, skb, | |
| qca->tx_ibs_state); | |
| /* Prepend skb with frame type */ | |
| memcpy(skb_push(skb, 1), &bt_cb(skb)->pkt_type, 1); | |
| /* Don't go to sleep in middle of patch download or | |
| * Out-Of-Band(GPIOs control) sleep is selected. | |
| */ | |
| if (!test_bit(STATE_IN_BAND_SLEEP_ENABLED, &qca->flags)) { | |
| skb_queue_tail(&qca->txq, skb); | |
| return 0; | |
| } | |
| spin_lock_irqsave(&qca->hci_ibs_lock, flags); | |
| /* Act according to current state */ | |
| switch (qca->tx_ibs_state) { | |
| case HCI_IBS_TX_AWAKE: | |
| BT_DBG("Device awake, sending normally"); | |
| skb_queue_tail(&qca->txq, skb); | |
| idle_delay = msecs_to_jiffies(qca->tx_idle_delay); | |
| mod_timer(&qca->tx_idle_timer, jiffies + idle_delay); | |
| break; | |
| case HCI_IBS_TX_ASLEEP: | |
| BT_DBG("Device asleep, waking up and queueing packet"); | |
| /* Save packet for later */ | |
| skb_queue_tail(&qca->tx_wait_q, skb); | |
| qca->tx_ibs_state = HCI_IBS_TX_WAKING; | |
| /* Schedule a work queue to wake up device */ | |
| queue_work(qca->workqueue, &qca->ws_awake_device); | |
| break; | |
| case HCI_IBS_TX_WAKING: | |
| BT_DBG("Device waking up, queueing packet"); | |
| /* Transient state; just keep packet for later */ | |
| skb_queue_tail(&qca->tx_wait_q, skb); | |
| break; | |
| default: | |
| BT_ERR("Illegal tx state: %d (losing packet)", | |
| qca->tx_ibs_state); | |
| kfree_skb(skb); | |
| break; | |
| } | |
| spin_unlock_irqrestore(&qca->hci_ibs_lock, flags); | |
| return 0; | |
| } | |
| static int qca_ibs_sleep_ind(struct hci_dev *hdev, struct sk_buff *skb) | |
| { | |
| struct hci_uart *hu = hci_get_drvdata(hdev); | |
| BT_DBG("hu %p recv hci ibs cmd 0x%x", hu, HCI_IBS_SLEEP_IND); | |
| device_want_to_sleep(hu); | |
| kfree_skb(skb); | |
| return 0; | |
| } | |
| static int qca_ibs_wake_ind(struct hci_dev *hdev, struct sk_buff *skb) | |
| { | |
| struct hci_uart *hu = hci_get_drvdata(hdev); | |
| BT_DBG("hu %p recv hci ibs cmd 0x%x", hu, HCI_IBS_WAKE_IND); | |
| device_want_to_wakeup(hu); | |
| kfree_skb(skb); | |
| return 0; | |
| } | |
| static int qca_ibs_wake_ack(struct hci_dev *hdev, struct sk_buff *skb) | |
| { | |
| struct hci_uart *hu = hci_get_drvdata(hdev); | |
| BT_DBG("hu %p recv hci ibs cmd 0x%x", hu, HCI_IBS_WAKE_ACK); | |
| device_woke_up(hu); | |
| kfree_skb(skb); | |
| return 0; | |
| } | |
| #define QCA_IBS_SLEEP_IND_EVENT \ | |
| .type = HCI_IBS_SLEEP_IND, \ | |
| .hlen = 0, \ | |
| .loff = 0, \ | |
| .lsize = 0, \ | |
| .maxlen = HCI_MAX_IBS_SIZE | |
| #define QCA_IBS_WAKE_IND_EVENT \ | |
| .type = HCI_IBS_WAKE_IND, \ | |
| .hlen = 0, \ | |
| .loff = 0, \ | |
| .lsize = 0, \ | |
| .maxlen = HCI_MAX_IBS_SIZE | |
| #define QCA_IBS_WAKE_ACK_EVENT \ | |
| .type = HCI_IBS_WAKE_ACK, \ | |
| .hlen = 0, \ | |
| .loff = 0, \ | |
| .lsize = 0, \ | |
| .maxlen = HCI_MAX_IBS_SIZE | |
| static const struct h4_recv_pkt qca_recv_pkts[] = { | |
| { H4_RECV_ACL, .recv = hci_recv_frame }, | |
| { H4_RECV_SCO, .recv = hci_recv_frame }, | |
| { H4_RECV_EVENT, .recv = hci_recv_frame }, | |
| { QCA_IBS_WAKE_IND_EVENT, .recv = qca_ibs_wake_ind }, | |
| { QCA_IBS_WAKE_ACK_EVENT, .recv = qca_ibs_wake_ack }, | |
| { QCA_IBS_SLEEP_IND_EVENT, .recv = qca_ibs_sleep_ind }, | |
| }; | |
| static int qca_recv(struct hci_uart *hu, const void *data, int count) | |
| { | |
| struct qca_data *qca = hu->priv; | |
| if (!test_bit(HCI_UART_REGISTERED, &hu->flags)) | |
| return -EUNATCH; | |
| qca->rx_skb = h4_recv_buf(hu->hdev, qca->rx_skb, data, count, | |
| qca_recv_pkts, ARRAY_SIZE(qca_recv_pkts)); | |
| if (IS_ERR(qca->rx_skb)) { | |
| int err = PTR_ERR(qca->rx_skb); | |
| BT_ERR("%s: Frame reassembly failed (%d)", hu->hdev->name, err); | |
| qca->rx_skb = NULL; | |
| return err; | |
| } | |
| return count; | |
| } | |
| static struct sk_buff *qca_dequeue(struct hci_uart *hu) | |
| { | |
| struct qca_data *qca = hu->priv; | |
| return skb_dequeue(&qca->txq); | |
| } | |
| static uint8_t qca_get_baudrate_value(int speed) | |
| { | |
| switch (speed) { | |
| case 9600: | |
| return QCA_BAUDRATE_9600; | |
| case 19200: | |
| return QCA_BAUDRATE_19200; | |
| case 38400: | |
| return QCA_BAUDRATE_38400; | |
| case 57600: | |
| return QCA_BAUDRATE_57600; | |
| case 115200: | |
| return QCA_BAUDRATE_115200; | |
| case 230400: | |
| return QCA_BAUDRATE_230400; | |
| case 460800: | |
| return QCA_BAUDRATE_460800; | |
| case 500000: | |
| return QCA_BAUDRATE_500000; | |
| case 921600: | |
| return QCA_BAUDRATE_921600; | |
| case 1000000: | |
| return QCA_BAUDRATE_1000000; | |
| case 2000000: | |
| return QCA_BAUDRATE_2000000; | |
| case 3000000: | |
| return QCA_BAUDRATE_3000000; | |
| case 3500000: | |
| return QCA_BAUDRATE_3500000; | |
| default: | |
| return QCA_BAUDRATE_115200; | |
| } | |
| } | |
| static int qca_set_baudrate(struct hci_dev *hdev, uint8_t baudrate) | |
| { | |
| struct hci_uart *hu = hci_get_drvdata(hdev); | |
| struct qca_data *qca = hu->priv; | |
| struct sk_buff *skb; | |
| u8 cmd[] = { 0x01, 0x48, 0xFC, 0x01, 0x00 }; | |
| if (baudrate > QCA_BAUDRATE_3000000) | |
| return -EINVAL; | |
| cmd[4] = baudrate; | |
| skb = bt_skb_alloc(sizeof(cmd), GFP_ATOMIC); | |
| if (!skb) { | |
| BT_ERR("Failed to allocate memory for baudrate packet"); | |
| return -ENOMEM; | |
| } | |
| /* Assign commands to change baudrate and packet type. */ | |
| memcpy(skb_put(skb, sizeof(cmd)), cmd, sizeof(cmd)); | |
| bt_cb(skb)->pkt_type = HCI_COMMAND_PKT; | |
| skb_queue_tail(&qca->txq, skb); | |
| hci_uart_tx_wakeup(hu); | |
| /* wait 300ms to change new baudrate on controller side | |
| * controller will come back after they receive this HCI command | |
| * then host can communicate with new baudrate to controller | |
| */ | |
| set_current_state(TASK_UNINTERRUPTIBLE); | |
| schedule_timeout(msecs_to_jiffies(BAUDRATE_SETTLE_TIMEOUT_MS)); | |
| set_current_state(TASK_INTERRUPTIBLE); | |
| return 0; | |
| } | |
| static int qca_setup(struct hci_uart *hu) | |
| { | |
| struct hci_dev *hdev = hu->hdev; | |
| struct qca_data *qca = hu->priv; | |
| unsigned int speed, qca_baudrate = QCA_BAUDRATE_115200; | |
| int ret; | |
| BT_INFO("%s: ROME setup", hdev->name); | |
| /* Patch downloading has to be done without IBS mode */ | |
| clear_bit(STATE_IN_BAND_SLEEP_ENABLED, &qca->flags); | |
| /* Setup initial baudrate */ | |
| speed = 0; | |
| if (hu->init_speed) | |
| speed = hu->init_speed; | |
| else if (hu->proto->init_speed) | |
| speed = hu->proto->init_speed; | |
| if (speed) | |
| hci_uart_set_baudrate(hu, speed); | |
| /* Setup user speed if needed */ | |
| speed = 0; | |
| if (hu->oper_speed) | |
| speed = hu->oper_speed; | |
| else if (hu->proto->oper_speed) | |
| speed = hu->proto->oper_speed; | |
| if (speed) { | |
| qca_baudrate = qca_get_baudrate_value(speed); | |
| BT_INFO("%s: Set UART speed to %d", hdev->name, speed); | |
| ret = qca_set_baudrate(hdev, qca_baudrate); | |
| if (ret) { | |
| BT_ERR("%s: Failed to change the baud rate (%d)", | |
| hdev->name, ret); | |
| return ret; | |
| } | |
| hci_uart_set_baudrate(hu, speed); | |
| } | |
| /* Setup patch / NVM configurations */ | |
| ret = qca_uart_setup_rome(hdev, qca_baudrate); | |
| if (!ret) { | |
| set_bit(STATE_IN_BAND_SLEEP_ENABLED, &qca->flags); | |
| qca_debugfs_init(hdev); | |
| } | |
| /* Setup bdaddr */ | |
| hu->hdev->set_bdaddr = qca_set_bdaddr_rome; | |
| return ret; | |
| } | |
| static struct hci_uart_proto qca_proto = { | |
| .id = HCI_UART_QCA, | |
| .name = "QCA", | |
| .manufacturer = 29, | |
| .init_speed = 115200, | |
| .oper_speed = 3000000, | |
| .open = qca_open, | |
| .close = qca_close, | |
| .flush = qca_flush, | |
| .setup = qca_setup, | |
| .recv = qca_recv, | |
| .enqueue = qca_enqueue, | |
| .dequeue = qca_dequeue, | |
| }; | |
| int __init qca_init(void) | |
| { | |
| return hci_uart_register_proto(&qca_proto); | |
| } | |
| int __exit qca_deinit(void) | |
| { | |
| return hci_uart_unregister_proto(&qca_proto); | |
| } |