| /* | |
| * ipmi_watchdog.c | |
| * | |
| * A watchdog timer based upon the IPMI interface. | |
| * | |
| * Author: MontaVista Software, Inc. | |
| * Corey Minyard <minyard@mvista.com> | |
| * source@mvista.com | |
| * | |
| * Copyright 2002 MontaVista Software Inc. | |
| * | |
| * This program is free software; you can redistribute it and/or modify it | |
| * under the terms of the GNU General Public License as published by the | |
| * Free Software Foundation; either version 2 of the License, or (at your | |
| * option) any later version. | |
| * | |
| * | |
| * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED | |
| * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF | |
| * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. | |
| * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, | |
| * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, | |
| * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS | |
| * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND | |
| * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR | |
| * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE | |
| * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. | |
| * | |
| * You should have received a copy of the GNU General Public License along | |
| * with this program; if not, write to the Free Software Foundation, Inc., | |
| * 675 Mass Ave, Cambridge, MA 02139, USA. | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/moduleparam.h> | |
| #include <linux/ipmi.h> | |
| #include <linux/ipmi_smi.h> | |
| #include <linux/mutex.h> | |
| #include <linux/watchdog.h> | |
| #include <linux/miscdevice.h> | |
| #include <linux/init.h> | |
| #include <linux/completion.h> | |
| #include <linux/kdebug.h> | |
| #include <linux/rwsem.h> | |
| #include <linux/errno.h> | |
| #include <asm/uaccess.h> | |
| #include <linux/notifier.h> | |
| #include <linux/nmi.h> | |
| #include <linux/reboot.h> | |
| #include <linux/wait.h> | |
| #include <linux/poll.h> | |
| #include <linux/string.h> | |
| #include <linux/ctype.h> | |
| #include <linux/delay.h> | |
| #include <linux/atomic.h> | |
| #ifdef CONFIG_X86 | |
| /* | |
| * This is ugly, but I've determined that x86 is the only architecture | |
| * that can reasonably support the IPMI NMI watchdog timeout at this | |
| * time. If another architecture adds this capability somehow, it | |
| * will have to be a somewhat different mechanism and I have no idea | |
| * how it will work. So in the unlikely event that another | |
| * architecture supports this, we can figure out a good generic | |
| * mechanism for it at that time. | |
| */ | |
| #include <asm/kdebug.h> | |
| #include <asm/nmi.h> | |
| #define HAVE_DIE_NMI | |
| #endif | |
| #define PFX "IPMI Watchdog: " | |
| /* | |
| * The IPMI command/response information for the watchdog timer. | |
| */ | |
| /* values for byte 1 of the set command, byte 2 of the get response. */ | |
| #define WDOG_DONT_LOG (1 << 7) | |
| #define WDOG_DONT_STOP_ON_SET (1 << 6) | |
| #define WDOG_SET_TIMER_USE(byte, use) \ | |
| byte = ((byte) & 0xf8) | ((use) & 0x7) | |
| #define WDOG_GET_TIMER_USE(byte) ((byte) & 0x7) | |
| #define WDOG_TIMER_USE_BIOS_FRB2 1 | |
| #define WDOG_TIMER_USE_BIOS_POST 2 | |
| #define WDOG_TIMER_USE_OS_LOAD 3 | |
| #define WDOG_TIMER_USE_SMS_OS 4 | |
| #define WDOG_TIMER_USE_OEM 5 | |
| /* values for byte 2 of the set command, byte 3 of the get response. */ | |
| #define WDOG_SET_PRETIMEOUT_ACT(byte, use) \ | |
| byte = ((byte) & 0x8f) | (((use) & 0x7) << 4) | |
| #define WDOG_GET_PRETIMEOUT_ACT(byte) (((byte) >> 4) & 0x7) | |
| #define WDOG_PRETIMEOUT_NONE 0 | |
| #define WDOG_PRETIMEOUT_SMI 1 | |
| #define WDOG_PRETIMEOUT_NMI 2 | |
| #define WDOG_PRETIMEOUT_MSG_INT 3 | |
| /* Operations that can be performed on a pretimout. */ | |
| #define WDOG_PREOP_NONE 0 | |
| #define WDOG_PREOP_PANIC 1 | |
| /* Cause data to be available to read. Doesn't work in NMI mode. */ | |
| #define WDOG_PREOP_GIVE_DATA 2 | |
| /* Actions to perform on a full timeout. */ | |
| #define WDOG_SET_TIMEOUT_ACT(byte, use) \ | |
| byte = ((byte) & 0xf8) | ((use) & 0x7) | |
| #define WDOG_GET_TIMEOUT_ACT(byte) ((byte) & 0x7) | |
| #define WDOG_TIMEOUT_NONE 0 | |
| #define WDOG_TIMEOUT_RESET 1 | |
| #define WDOG_TIMEOUT_POWER_DOWN 2 | |
| #define WDOG_TIMEOUT_POWER_CYCLE 3 | |
| /* | |
| * Byte 3 of the get command, byte 4 of the get response is the | |
| * pre-timeout in seconds. | |
| */ | |
| /* Bits for setting byte 4 of the set command, byte 5 of the get response. */ | |
| #define WDOG_EXPIRE_CLEAR_BIOS_FRB2 (1 << 1) | |
| #define WDOG_EXPIRE_CLEAR_BIOS_POST (1 << 2) | |
| #define WDOG_EXPIRE_CLEAR_OS_LOAD (1 << 3) | |
| #define WDOG_EXPIRE_CLEAR_SMS_OS (1 << 4) | |
| #define WDOG_EXPIRE_CLEAR_OEM (1 << 5) | |
| /* | |
| * Setting/getting the watchdog timer value. This is for bytes 5 and | |
| * 6 (the timeout time) of the set command, and bytes 6 and 7 (the | |
| * timeout time) and 8 and 9 (the current countdown value) of the | |
| * response. The timeout value is given in seconds (in the command it | |
| * is 100ms intervals). | |
| */ | |
| #define WDOG_SET_TIMEOUT(byte1, byte2, val) \ | |
| (byte1) = (((val) * 10) & 0xff), (byte2) = (((val) * 10) >> 8) | |
| #define WDOG_GET_TIMEOUT(byte1, byte2) \ | |
| (((byte1) | ((byte2) << 8)) / 10) | |
| #define IPMI_WDOG_RESET_TIMER 0x22 | |
| #define IPMI_WDOG_SET_TIMER 0x24 | |
| #define IPMI_WDOG_GET_TIMER 0x25 | |
| #define IPMI_WDOG_TIMER_NOT_INIT_RESP 0x80 | |
| static DEFINE_MUTEX(ipmi_watchdog_mutex); | |
| static bool nowayout = WATCHDOG_NOWAYOUT; | |
| static ipmi_user_t watchdog_user; | |
| static int watchdog_ifnum; | |
| /* Default the timeout to 10 seconds. */ | |
| static int timeout = 10; | |
| /* The pre-timeout is disabled by default. */ | |
| static int pretimeout; | |
| /* Default timeout to set on panic */ | |
| static int panic_wdt_timeout = 255; | |
| /* Default action is to reset the board on a timeout. */ | |
| static unsigned char action_val = WDOG_TIMEOUT_RESET; | |
| static char action[16] = "reset"; | |
| static unsigned char preaction_val = WDOG_PRETIMEOUT_NONE; | |
| static char preaction[16] = "pre_none"; | |
| static unsigned char preop_val = WDOG_PREOP_NONE; | |
| static char preop[16] = "preop_none"; | |
| static DEFINE_SPINLOCK(ipmi_read_lock); | |
| static char data_to_read; | |
| static DECLARE_WAIT_QUEUE_HEAD(read_q); | |
| static struct fasync_struct *fasync_q; | |
| static char pretimeout_since_last_heartbeat; | |
| static char expect_close; | |
| static int ifnum_to_use = -1; | |
| /* Parameters to ipmi_set_timeout */ | |
| #define IPMI_SET_TIMEOUT_NO_HB 0 | |
| #define IPMI_SET_TIMEOUT_HB_IF_NECESSARY 1 | |
| #define IPMI_SET_TIMEOUT_FORCE_HB 2 | |
| static int ipmi_set_timeout(int do_heartbeat); | |
| static void ipmi_register_watchdog(int ipmi_intf); | |
| static void ipmi_unregister_watchdog(int ipmi_intf); | |
| /* | |
| * If true, the driver will start running as soon as it is configured | |
| * and ready. | |
| */ | |
| static int start_now; | |
| static int set_param_timeout(const char *val, const struct kernel_param *kp) | |
| { | |
| char *endp; | |
| int l; | |
| int rv = 0; | |
| if (!val) | |
| return -EINVAL; | |
| l = simple_strtoul(val, &endp, 0); | |
| if (endp == val) | |
| return -EINVAL; | |
| *((int *)kp->arg) = l; | |
| if (watchdog_user) | |
| rv = ipmi_set_timeout(IPMI_SET_TIMEOUT_HB_IF_NECESSARY); | |
| return rv; | |
| } | |
| static const struct kernel_param_ops param_ops_timeout = { | |
| .set = set_param_timeout, | |
| .get = param_get_int, | |
| }; | |
| #define param_check_timeout param_check_int | |
| typedef int (*action_fn)(const char *intval, char *outval); | |
| static int action_op(const char *inval, char *outval); | |
| static int preaction_op(const char *inval, char *outval); | |
| static int preop_op(const char *inval, char *outval); | |
| static void check_parms(void); | |
| static int set_param_str(const char *val, const struct kernel_param *kp) | |
| { | |
| action_fn fn = (action_fn) kp->arg; | |
| int rv = 0; | |
| char valcp[16]; | |
| char *s; | |
| strncpy(valcp, val, 16); | |
| valcp[15] = '\0'; | |
| s = strstrip(valcp); | |
| rv = fn(s, NULL); | |
| if (rv) | |
| goto out; | |
| check_parms(); | |
| if (watchdog_user) | |
| rv = ipmi_set_timeout(IPMI_SET_TIMEOUT_HB_IF_NECESSARY); | |
| out: | |
| return rv; | |
| } | |
| static int get_param_str(char *buffer, const struct kernel_param *kp) | |
| { | |
| action_fn fn = (action_fn) kp->arg; | |
| int rv; | |
| rv = fn(NULL, buffer); | |
| if (rv) | |
| return rv; | |
| return strlen(buffer); | |
| } | |
| static int set_param_wdog_ifnum(const char *val, const struct kernel_param *kp) | |
| { | |
| int rv = param_set_int(val, kp); | |
| if (rv) | |
| return rv; | |
| if ((ifnum_to_use < 0) || (ifnum_to_use == watchdog_ifnum)) | |
| return 0; | |
| ipmi_unregister_watchdog(watchdog_ifnum); | |
| ipmi_register_watchdog(ifnum_to_use); | |
| return 0; | |
| } | |
| static const struct kernel_param_ops param_ops_wdog_ifnum = { | |
| .set = set_param_wdog_ifnum, | |
| .get = param_get_int, | |
| }; | |
| #define param_check_wdog_ifnum param_check_int | |
| static const struct kernel_param_ops param_ops_str = { | |
| .set = set_param_str, | |
| .get = get_param_str, | |
| }; | |
| module_param(ifnum_to_use, wdog_ifnum, 0644); | |
| MODULE_PARM_DESC(ifnum_to_use, "The interface number to use for the watchdog " | |
| "timer. Setting to -1 defaults to the first registered " | |
| "interface"); | |
| module_param(timeout, timeout, 0644); | |
| MODULE_PARM_DESC(timeout, "Timeout value in seconds."); | |
| module_param(pretimeout, timeout, 0644); | |
| MODULE_PARM_DESC(pretimeout, "Pretimeout value in seconds."); | |
| module_param(panic_wdt_timeout, timeout, 0644); | |
| MODULE_PARM_DESC(timeout, "Timeout value on kernel panic in seconds."); | |
| module_param_cb(action, ¶m_ops_str, action_op, 0644); | |
| MODULE_PARM_DESC(action, "Timeout action. One of: " | |
| "reset, none, power_cycle, power_off."); | |
| module_param_cb(preaction, ¶m_ops_str, preaction_op, 0644); | |
| MODULE_PARM_DESC(preaction, "Pretimeout action. One of: " | |
| "pre_none, pre_smi, pre_nmi, pre_int."); | |
| module_param_cb(preop, ¶m_ops_str, preop_op, 0644); | |
| MODULE_PARM_DESC(preop, "Pretimeout driver operation. One of: " | |
| "preop_none, preop_panic, preop_give_data."); | |
| module_param(start_now, int, 0444); | |
| MODULE_PARM_DESC(start_now, "Set to 1 to start the watchdog as" | |
| "soon as the driver is loaded."); | |
| module_param(nowayout, bool, 0644); | |
| MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started " | |
| "(default=CONFIG_WATCHDOG_NOWAYOUT)"); | |
| /* Default state of the timer. */ | |
| static unsigned char ipmi_watchdog_state = WDOG_TIMEOUT_NONE; | |
| /* If shutting down via IPMI, we ignore the heartbeat. */ | |
| static int ipmi_ignore_heartbeat; | |
| /* Is someone using the watchdog? Only one user is allowed. */ | |
| static unsigned long ipmi_wdog_open; | |
| /* | |
| * If set to 1, the heartbeat command will set the state to reset and | |
| * start the timer. The timer doesn't normally run when the driver is | |
| * first opened until the heartbeat is set the first time, this | |
| * variable is used to accomplish this. | |
| */ | |
| static int ipmi_start_timer_on_heartbeat; | |
| /* IPMI version of the BMC. */ | |
| static unsigned char ipmi_version_major; | |
| static unsigned char ipmi_version_minor; | |
| /* If a pretimeout occurs, this is used to allow only one panic to happen. */ | |
| static atomic_t preop_panic_excl = ATOMIC_INIT(-1); | |
| #ifdef HAVE_DIE_NMI | |
| static int testing_nmi; | |
| static int nmi_handler_registered; | |
| #endif | |
| static int ipmi_heartbeat(void); | |
| /* | |
| * We use a mutex to make sure that only one thing can send a set | |
| * timeout at one time, because we only have one copy of the data. | |
| * The mutex is claimed when the set_timeout is sent and freed | |
| * when both messages are free. | |
| */ | |
| static atomic_t set_timeout_tofree = ATOMIC_INIT(0); | |
| static DEFINE_MUTEX(set_timeout_lock); | |
| static DECLARE_COMPLETION(set_timeout_wait); | |
| static void set_timeout_free_smi(struct ipmi_smi_msg *msg) | |
| { | |
| if (atomic_dec_and_test(&set_timeout_tofree)) | |
| complete(&set_timeout_wait); | |
| } | |
| static void set_timeout_free_recv(struct ipmi_recv_msg *msg) | |
| { | |
| if (atomic_dec_and_test(&set_timeout_tofree)) | |
| complete(&set_timeout_wait); | |
| } | |
| static struct ipmi_smi_msg set_timeout_smi_msg = { | |
| .done = set_timeout_free_smi | |
| }; | |
| static struct ipmi_recv_msg set_timeout_recv_msg = { | |
| .done = set_timeout_free_recv | |
| }; | |
| static int i_ipmi_set_timeout(struct ipmi_smi_msg *smi_msg, | |
| struct ipmi_recv_msg *recv_msg, | |
| int *send_heartbeat_now) | |
| { | |
| struct kernel_ipmi_msg msg; | |
| unsigned char data[6]; | |
| int rv; | |
| struct ipmi_system_interface_addr addr; | |
| int hbnow = 0; | |
| /* These can be cleared as we are setting the timeout. */ | |
| pretimeout_since_last_heartbeat = 0; | |
| data[0] = 0; | |
| WDOG_SET_TIMER_USE(data[0], WDOG_TIMER_USE_SMS_OS); | |
| if ((ipmi_version_major > 1) | |
| || ((ipmi_version_major == 1) && (ipmi_version_minor >= 5))) { | |
| /* This is an IPMI 1.5-only feature. */ | |
| data[0] |= WDOG_DONT_STOP_ON_SET; | |
| } else if (ipmi_watchdog_state != WDOG_TIMEOUT_NONE) { | |
| /* | |
| * In ipmi 1.0, setting the timer stops the watchdog, we | |
| * need to start it back up again. | |
| */ | |
| hbnow = 1; | |
| } | |
| data[1] = 0; | |
| WDOG_SET_TIMEOUT_ACT(data[1], ipmi_watchdog_state); | |
| if ((pretimeout > 0) && (ipmi_watchdog_state != WDOG_TIMEOUT_NONE)) { | |
| WDOG_SET_PRETIMEOUT_ACT(data[1], preaction_val); | |
| data[2] = pretimeout; | |
| } else { | |
| WDOG_SET_PRETIMEOUT_ACT(data[1], WDOG_PRETIMEOUT_NONE); | |
| data[2] = 0; /* No pretimeout. */ | |
| } | |
| data[3] = 0; | |
| WDOG_SET_TIMEOUT(data[4], data[5], timeout); | |
| addr.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE; | |
| addr.channel = IPMI_BMC_CHANNEL; | |
| addr.lun = 0; | |
| msg.netfn = 0x06; | |
| msg.cmd = IPMI_WDOG_SET_TIMER; | |
| msg.data = data; | |
| msg.data_len = sizeof(data); | |
| rv = ipmi_request_supply_msgs(watchdog_user, | |
| (struct ipmi_addr *) &addr, | |
| 0, | |
| &msg, | |
| NULL, | |
| smi_msg, | |
| recv_msg, | |
| 1); | |
| if (rv) { | |
| printk(KERN_WARNING PFX "set timeout error: %d\n", | |
| rv); | |
| } | |
| if (send_heartbeat_now) | |
| *send_heartbeat_now = hbnow; | |
| return rv; | |
| } | |
| static int ipmi_set_timeout(int do_heartbeat) | |
| { | |
| int send_heartbeat_now; | |
| int rv; | |
| /* We can only send one of these at a time. */ | |
| mutex_lock(&set_timeout_lock); | |
| atomic_set(&set_timeout_tofree, 2); | |
| rv = i_ipmi_set_timeout(&set_timeout_smi_msg, | |
| &set_timeout_recv_msg, | |
| &send_heartbeat_now); | |
| if (rv) { | |
| mutex_unlock(&set_timeout_lock); | |
| goto out; | |
| } | |
| wait_for_completion(&set_timeout_wait); | |
| mutex_unlock(&set_timeout_lock); | |
| if ((do_heartbeat == IPMI_SET_TIMEOUT_FORCE_HB) | |
| || ((send_heartbeat_now) | |
| && (do_heartbeat == IPMI_SET_TIMEOUT_HB_IF_NECESSARY))) | |
| rv = ipmi_heartbeat(); | |
| out: | |
| return rv; | |
| } | |
| static atomic_t panic_done_count = ATOMIC_INIT(0); | |
| static void panic_smi_free(struct ipmi_smi_msg *msg) | |
| { | |
| atomic_dec(&panic_done_count); | |
| } | |
| static void panic_recv_free(struct ipmi_recv_msg *msg) | |
| { | |
| atomic_dec(&panic_done_count); | |
| } | |
| static struct ipmi_smi_msg panic_halt_heartbeat_smi_msg = { | |
| .done = panic_smi_free | |
| }; | |
| static struct ipmi_recv_msg panic_halt_heartbeat_recv_msg = { | |
| .done = panic_recv_free | |
| }; | |
| static void panic_halt_ipmi_heartbeat(void) | |
| { | |
| struct kernel_ipmi_msg msg; | |
| struct ipmi_system_interface_addr addr; | |
| int rv; | |
| /* | |
| * Don't reset the timer if we have the timer turned off, that | |
| * re-enables the watchdog. | |
| */ | |
| if (ipmi_watchdog_state == WDOG_TIMEOUT_NONE) | |
| return; | |
| addr.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE; | |
| addr.channel = IPMI_BMC_CHANNEL; | |
| addr.lun = 0; | |
| msg.netfn = 0x06; | |
| msg.cmd = IPMI_WDOG_RESET_TIMER; | |
| msg.data = NULL; | |
| msg.data_len = 0; | |
| atomic_add(2, &panic_done_count); | |
| rv = ipmi_request_supply_msgs(watchdog_user, | |
| (struct ipmi_addr *) &addr, | |
| 0, | |
| &msg, | |
| NULL, | |
| &panic_halt_heartbeat_smi_msg, | |
| &panic_halt_heartbeat_recv_msg, | |
| 1); | |
| if (rv) | |
| atomic_sub(2, &panic_done_count); | |
| } | |
| static struct ipmi_smi_msg panic_halt_smi_msg = { | |
| .done = panic_smi_free | |
| }; | |
| static struct ipmi_recv_msg panic_halt_recv_msg = { | |
| .done = panic_recv_free | |
| }; | |
| /* | |
| * Special call, doesn't claim any locks. This is only to be called | |
| * at panic or halt time, in run-to-completion mode, when the caller | |
| * is the only CPU and the only thing that will be going is these IPMI | |
| * calls. | |
| */ | |
| static void panic_halt_ipmi_set_timeout(void) | |
| { | |
| int send_heartbeat_now; | |
| int rv; | |
| /* Wait for the messages to be free. */ | |
| while (atomic_read(&panic_done_count) != 0) | |
| ipmi_poll_interface(watchdog_user); | |
| atomic_add(2, &panic_done_count); | |
| rv = i_ipmi_set_timeout(&panic_halt_smi_msg, | |
| &panic_halt_recv_msg, | |
| &send_heartbeat_now); | |
| if (rv) { | |
| atomic_sub(2, &panic_done_count); | |
| printk(KERN_WARNING PFX | |
| "Unable to extend the watchdog timeout."); | |
| } else { | |
| if (send_heartbeat_now) | |
| panic_halt_ipmi_heartbeat(); | |
| } | |
| while (atomic_read(&panic_done_count) != 0) | |
| ipmi_poll_interface(watchdog_user); | |
| } | |
| /* | |
| * We use a mutex to make sure that only one thing can send a | |
| * heartbeat at one time, because we only have one copy of the data. | |
| * The semaphore is claimed when the set_timeout is sent and freed | |
| * when both messages are free. | |
| */ | |
| static atomic_t heartbeat_tofree = ATOMIC_INIT(0); | |
| static DEFINE_MUTEX(heartbeat_lock); | |
| static DECLARE_COMPLETION(heartbeat_wait); | |
| static void heartbeat_free_smi(struct ipmi_smi_msg *msg) | |
| { | |
| if (atomic_dec_and_test(&heartbeat_tofree)) | |
| complete(&heartbeat_wait); | |
| } | |
| static void heartbeat_free_recv(struct ipmi_recv_msg *msg) | |
| { | |
| if (atomic_dec_and_test(&heartbeat_tofree)) | |
| complete(&heartbeat_wait); | |
| } | |
| static struct ipmi_smi_msg heartbeat_smi_msg = { | |
| .done = heartbeat_free_smi | |
| }; | |
| static struct ipmi_recv_msg heartbeat_recv_msg = { | |
| .done = heartbeat_free_recv | |
| }; | |
| static int ipmi_heartbeat(void) | |
| { | |
| struct kernel_ipmi_msg msg; | |
| int rv; | |
| struct ipmi_system_interface_addr addr; | |
| int timeout_retries = 0; | |
| if (ipmi_ignore_heartbeat) | |
| return 0; | |
| if (ipmi_start_timer_on_heartbeat) { | |
| ipmi_start_timer_on_heartbeat = 0; | |
| ipmi_watchdog_state = action_val; | |
| return ipmi_set_timeout(IPMI_SET_TIMEOUT_FORCE_HB); | |
| } else if (pretimeout_since_last_heartbeat) { | |
| /* | |
| * A pretimeout occurred, make sure we set the timeout. | |
| * We don't want to set the action, though, we want to | |
| * leave that alone (thus it can't be combined with the | |
| * above operation. | |
| */ | |
| return ipmi_set_timeout(IPMI_SET_TIMEOUT_HB_IF_NECESSARY); | |
| } | |
| mutex_lock(&heartbeat_lock); | |
| restart: | |
| atomic_set(&heartbeat_tofree, 2); | |
| /* | |
| * Don't reset the timer if we have the timer turned off, that | |
| * re-enables the watchdog. | |
| */ | |
| if (ipmi_watchdog_state == WDOG_TIMEOUT_NONE) { | |
| mutex_unlock(&heartbeat_lock); | |
| return 0; | |
| } | |
| addr.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE; | |
| addr.channel = IPMI_BMC_CHANNEL; | |
| addr.lun = 0; | |
| msg.netfn = 0x06; | |
| msg.cmd = IPMI_WDOG_RESET_TIMER; | |
| msg.data = NULL; | |
| msg.data_len = 0; | |
| rv = ipmi_request_supply_msgs(watchdog_user, | |
| (struct ipmi_addr *) &addr, | |
| 0, | |
| &msg, | |
| NULL, | |
| &heartbeat_smi_msg, | |
| &heartbeat_recv_msg, | |
| 1); | |
| if (rv) { | |
| mutex_unlock(&heartbeat_lock); | |
| printk(KERN_WARNING PFX "heartbeat failure: %d\n", | |
| rv); | |
| return rv; | |
| } | |
| /* Wait for the heartbeat to be sent. */ | |
| wait_for_completion(&heartbeat_wait); | |
| if (heartbeat_recv_msg.msg.data[0] == IPMI_WDOG_TIMER_NOT_INIT_RESP) { | |
| timeout_retries++; | |
| if (timeout_retries > 3) { | |
| printk(KERN_ERR PFX ": Unable to restore the IPMI" | |
| " watchdog's settings, giving up.\n"); | |
| rv = -EIO; | |
| goto out_unlock; | |
| } | |
| /* | |
| * The timer was not initialized, that means the BMC was | |
| * probably reset and lost the watchdog information. Attempt | |
| * to restore the timer's info. Note that we still hold | |
| * the heartbeat lock, to keep a heartbeat from happening | |
| * in this process, so must say no heartbeat to avoid a | |
| * deadlock on this mutex. | |
| */ | |
| rv = ipmi_set_timeout(IPMI_SET_TIMEOUT_NO_HB); | |
| if (rv) { | |
| printk(KERN_ERR PFX ": Unable to send the command to" | |
| " set the watchdog's settings, giving up.\n"); | |
| goto out_unlock; | |
| } | |
| /* We might need a new heartbeat, so do it now */ | |
| goto restart; | |
| } else if (heartbeat_recv_msg.msg.data[0] != 0) { | |
| /* | |
| * Got an error in the heartbeat response. It was already | |
| * reported in ipmi_wdog_msg_handler, but we should return | |
| * an error here. | |
| */ | |
| rv = -EINVAL; | |
| } | |
| out_unlock: | |
| mutex_unlock(&heartbeat_lock); | |
| return rv; | |
| } | |
| static struct watchdog_info ident = { | |
| .options = 0, /* WDIOF_SETTIMEOUT, */ | |
| .firmware_version = 1, | |
| .identity = "IPMI" | |
| }; | |
| static int ipmi_ioctl(struct file *file, | |
| unsigned int cmd, unsigned long arg) | |
| { | |
| void __user *argp = (void __user *)arg; | |
| int i; | |
| int val; | |
| switch (cmd) { | |
| case WDIOC_GETSUPPORT: | |
| i = copy_to_user(argp, &ident, sizeof(ident)); | |
| return i ? -EFAULT : 0; | |
| case WDIOC_SETTIMEOUT: | |
| i = copy_from_user(&val, argp, sizeof(int)); | |
| if (i) | |
| return -EFAULT; | |
| timeout = val; | |
| return ipmi_set_timeout(IPMI_SET_TIMEOUT_HB_IF_NECESSARY); | |
| case WDIOC_GETTIMEOUT: | |
| i = copy_to_user(argp, &timeout, sizeof(timeout)); | |
| if (i) | |
| return -EFAULT; | |
| return 0; | |
| case WDIOC_SETPRETIMEOUT: | |
| i = copy_from_user(&val, argp, sizeof(int)); | |
| if (i) | |
| return -EFAULT; | |
| pretimeout = val; | |
| return ipmi_set_timeout(IPMI_SET_TIMEOUT_HB_IF_NECESSARY); | |
| case WDIOC_GETPRETIMEOUT: | |
| i = copy_to_user(argp, &pretimeout, sizeof(pretimeout)); | |
| if (i) | |
| return -EFAULT; | |
| return 0; | |
| case WDIOC_KEEPALIVE: | |
| return ipmi_heartbeat(); | |
| case WDIOC_SETOPTIONS: | |
| i = copy_from_user(&val, argp, sizeof(int)); | |
| if (i) | |
| return -EFAULT; | |
| if (val & WDIOS_DISABLECARD) { | |
| ipmi_watchdog_state = WDOG_TIMEOUT_NONE; | |
| ipmi_set_timeout(IPMI_SET_TIMEOUT_NO_HB); | |
| ipmi_start_timer_on_heartbeat = 0; | |
| } | |
| if (val & WDIOS_ENABLECARD) { | |
| ipmi_watchdog_state = action_val; | |
| ipmi_set_timeout(IPMI_SET_TIMEOUT_FORCE_HB); | |
| } | |
| return 0; | |
| case WDIOC_GETSTATUS: | |
| val = 0; | |
| i = copy_to_user(argp, &val, sizeof(val)); | |
| if (i) | |
| return -EFAULT; | |
| return 0; | |
| default: | |
| return -ENOIOCTLCMD; | |
| } | |
| } | |
| static long ipmi_unlocked_ioctl(struct file *file, | |
| unsigned int cmd, | |
| unsigned long arg) | |
| { | |
| int ret; | |
| mutex_lock(&ipmi_watchdog_mutex); | |
| ret = ipmi_ioctl(file, cmd, arg); | |
| mutex_unlock(&ipmi_watchdog_mutex); | |
| return ret; | |
| } | |
| static ssize_t ipmi_write(struct file *file, | |
| const char __user *buf, | |
| size_t len, | |
| loff_t *ppos) | |
| { | |
| int rv; | |
| if (len) { | |
| if (!nowayout) { | |
| size_t i; | |
| /* In case it was set long ago */ | |
| expect_close = 0; | |
| for (i = 0; i != len; i++) { | |
| char c; | |
| if (get_user(c, buf + i)) | |
| return -EFAULT; | |
| if (c == 'V') | |
| expect_close = 42; | |
| } | |
| } | |
| rv = ipmi_heartbeat(); | |
| if (rv) | |
| return rv; | |
| } | |
| return len; | |
| } | |
| static ssize_t ipmi_read(struct file *file, | |
| char __user *buf, | |
| size_t count, | |
| loff_t *ppos) | |
| { | |
| int rv = 0; | |
| wait_queue_t wait; | |
| if (count <= 0) | |
| return 0; | |
| /* | |
| * Reading returns if the pretimeout has gone off, and it only does | |
| * it once per pretimeout. | |
| */ | |
| spin_lock(&ipmi_read_lock); | |
| if (!data_to_read) { | |
| if (file->f_flags & O_NONBLOCK) { | |
| rv = -EAGAIN; | |
| goto out; | |
| } | |
| init_waitqueue_entry(&wait, current); | |
| add_wait_queue(&read_q, &wait); | |
| while (!data_to_read) { | |
| set_current_state(TASK_INTERRUPTIBLE); | |
| spin_unlock(&ipmi_read_lock); | |
| schedule(); | |
| spin_lock(&ipmi_read_lock); | |
| } | |
| remove_wait_queue(&read_q, &wait); | |
| if (signal_pending(current)) { | |
| rv = -ERESTARTSYS; | |
| goto out; | |
| } | |
| } | |
| data_to_read = 0; | |
| out: | |
| spin_unlock(&ipmi_read_lock); | |
| if (rv == 0) { | |
| if (copy_to_user(buf, &data_to_read, 1)) | |
| rv = -EFAULT; | |
| else | |
| rv = 1; | |
| } | |
| return rv; | |
| } | |
| static int ipmi_open(struct inode *ino, struct file *filep) | |
| { | |
| switch (iminor(ino)) { | |
| case WATCHDOG_MINOR: | |
| if (test_and_set_bit(0, &ipmi_wdog_open)) | |
| return -EBUSY; | |
| /* | |
| * Don't start the timer now, let it start on the | |
| * first heartbeat. | |
| */ | |
| ipmi_start_timer_on_heartbeat = 1; | |
| return nonseekable_open(ino, filep); | |
| default: | |
| return (-ENODEV); | |
| } | |
| } | |
| static unsigned int ipmi_poll(struct file *file, poll_table *wait) | |
| { | |
| unsigned int mask = 0; | |
| poll_wait(file, &read_q, wait); | |
| spin_lock(&ipmi_read_lock); | |
| if (data_to_read) | |
| mask |= (POLLIN | POLLRDNORM); | |
| spin_unlock(&ipmi_read_lock); | |
| return mask; | |
| } | |
| static int ipmi_fasync(int fd, struct file *file, int on) | |
| { | |
| int result; | |
| result = fasync_helper(fd, file, on, &fasync_q); | |
| return (result); | |
| } | |
| static int ipmi_close(struct inode *ino, struct file *filep) | |
| { | |
| if (iminor(ino) == WATCHDOG_MINOR) { | |
| if (expect_close == 42) { | |
| ipmi_watchdog_state = WDOG_TIMEOUT_NONE; | |
| ipmi_set_timeout(IPMI_SET_TIMEOUT_NO_HB); | |
| } else { | |
| printk(KERN_CRIT PFX | |
| "Unexpected close, not stopping watchdog!\n"); | |
| ipmi_heartbeat(); | |
| } | |
| clear_bit(0, &ipmi_wdog_open); | |
| } | |
| expect_close = 0; | |
| return 0; | |
| } | |
| static const struct file_operations ipmi_wdog_fops = { | |
| .owner = THIS_MODULE, | |
| .read = ipmi_read, | |
| .poll = ipmi_poll, | |
| .write = ipmi_write, | |
| .unlocked_ioctl = ipmi_unlocked_ioctl, | |
| .open = ipmi_open, | |
| .release = ipmi_close, | |
| .fasync = ipmi_fasync, | |
| .llseek = no_llseek, | |
| }; | |
| static struct miscdevice ipmi_wdog_miscdev = { | |
| .minor = WATCHDOG_MINOR, | |
| .name = "watchdog", | |
| .fops = &ipmi_wdog_fops | |
| }; | |
| static void ipmi_wdog_msg_handler(struct ipmi_recv_msg *msg, | |
| void *handler_data) | |
| { | |
| if (msg->msg.cmd == IPMI_WDOG_RESET_TIMER && | |
| msg->msg.data[0] == IPMI_WDOG_TIMER_NOT_INIT_RESP) | |
| printk(KERN_INFO PFX "response: The IPMI controller appears" | |
| " to have been reset, will attempt to reinitialize" | |
| " the watchdog timer\n"); | |
| else if (msg->msg.data[0] != 0) | |
| printk(KERN_ERR PFX "response: Error %x on cmd %x\n", | |
| msg->msg.data[0], | |
| msg->msg.cmd); | |
| ipmi_free_recv_msg(msg); | |
| } | |
| static void ipmi_wdog_pretimeout_handler(void *handler_data) | |
| { | |
| if (preaction_val != WDOG_PRETIMEOUT_NONE) { | |
| if (preop_val == WDOG_PREOP_PANIC) { | |
| if (atomic_inc_and_test(&preop_panic_excl)) | |
| panic("Watchdog pre-timeout"); | |
| } else if (preop_val == WDOG_PREOP_GIVE_DATA) { | |
| spin_lock(&ipmi_read_lock); | |
| data_to_read = 1; | |
| wake_up_interruptible(&read_q); | |
| kill_fasync(&fasync_q, SIGIO, POLL_IN); | |
| spin_unlock(&ipmi_read_lock); | |
| } | |
| } | |
| /* | |
| * On some machines, the heartbeat will give an error and not | |
| * work unless we re-enable the timer. So do so. | |
| */ | |
| pretimeout_since_last_heartbeat = 1; | |
| } | |
| static struct ipmi_user_hndl ipmi_hndlrs = { | |
| .ipmi_recv_hndl = ipmi_wdog_msg_handler, | |
| .ipmi_watchdog_pretimeout = ipmi_wdog_pretimeout_handler | |
| }; | |
| static void ipmi_register_watchdog(int ipmi_intf) | |
| { | |
| int rv = -EBUSY; | |
| if (watchdog_user) | |
| goto out; | |
| if ((ifnum_to_use >= 0) && (ifnum_to_use != ipmi_intf)) | |
| goto out; | |
| watchdog_ifnum = ipmi_intf; | |
| rv = ipmi_create_user(ipmi_intf, &ipmi_hndlrs, NULL, &watchdog_user); | |
| if (rv < 0) { | |
| printk(KERN_CRIT PFX "Unable to register with ipmi\n"); | |
| goto out; | |
| } | |
| ipmi_get_version(watchdog_user, | |
| &ipmi_version_major, | |
| &ipmi_version_minor); | |
| rv = misc_register(&ipmi_wdog_miscdev); | |
| if (rv < 0) { | |
| ipmi_destroy_user(watchdog_user); | |
| watchdog_user = NULL; | |
| printk(KERN_CRIT PFX "Unable to register misc device\n"); | |
| } | |
| #ifdef HAVE_DIE_NMI | |
| if (nmi_handler_registered) { | |
| int old_pretimeout = pretimeout; | |
| int old_timeout = timeout; | |
| int old_preop_val = preop_val; | |
| /* | |
| * Set the pretimeout to go off in a second and give | |
| * ourselves plenty of time to stop the timer. | |
| */ | |
| ipmi_watchdog_state = WDOG_TIMEOUT_RESET; | |
| preop_val = WDOG_PREOP_NONE; /* Make sure nothing happens */ | |
| pretimeout = 99; | |
| timeout = 100; | |
| testing_nmi = 1; | |
| rv = ipmi_set_timeout(IPMI_SET_TIMEOUT_FORCE_HB); | |
| if (rv) { | |
| printk(KERN_WARNING PFX "Error starting timer to" | |
| " test NMI: 0x%x. The NMI pretimeout will" | |
| " likely not work\n", rv); | |
| rv = 0; | |
| goto out_restore; | |
| } | |
| msleep(1500); | |
| if (testing_nmi != 2) { | |
| printk(KERN_WARNING PFX "IPMI NMI didn't seem to" | |
| " occur. The NMI pretimeout will" | |
| " likely not work\n"); | |
| } | |
| out_restore: | |
| testing_nmi = 0; | |
| preop_val = old_preop_val; | |
| pretimeout = old_pretimeout; | |
| timeout = old_timeout; | |
| } | |
| #endif | |
| out: | |
| if ((start_now) && (rv == 0)) { | |
| /* Run from startup, so start the timer now. */ | |
| start_now = 0; /* Disable this function after first startup. */ | |
| ipmi_watchdog_state = action_val; | |
| ipmi_set_timeout(IPMI_SET_TIMEOUT_FORCE_HB); | |
| printk(KERN_INFO PFX "Starting now!\n"); | |
| } else { | |
| /* Stop the timer now. */ | |
| ipmi_watchdog_state = WDOG_TIMEOUT_NONE; | |
| ipmi_set_timeout(IPMI_SET_TIMEOUT_NO_HB); | |
| } | |
| } | |
| static void ipmi_unregister_watchdog(int ipmi_intf) | |
| { | |
| int rv; | |
| if (!watchdog_user) | |
| goto out; | |
| if (watchdog_ifnum != ipmi_intf) | |
| goto out; | |
| /* Make sure no one can call us any more. */ | |
| misc_deregister(&ipmi_wdog_miscdev); | |
| /* | |
| * Wait to make sure the message makes it out. The lower layer has | |
| * pointers to our buffers, we want to make sure they are done before | |
| * we release our memory. | |
| */ | |
| while (atomic_read(&set_timeout_tofree)) | |
| schedule_timeout_uninterruptible(1); | |
| /* Disconnect from IPMI. */ | |
| rv = ipmi_destroy_user(watchdog_user); | |
| if (rv) { | |
| printk(KERN_WARNING PFX "error unlinking from IPMI: %d\n", | |
| rv); | |
| } | |
| watchdog_user = NULL; | |
| out: | |
| return; | |
| } | |
| #ifdef HAVE_DIE_NMI | |
| static int | |
| ipmi_nmi(unsigned int val, struct pt_regs *regs) | |
| { | |
| /* | |
| * If we get here, it's an NMI that's not a memory or I/O | |
| * error. We can't truly tell if it's from IPMI or not | |
| * without sending a message, and sending a message is almost | |
| * impossible because of locking. | |
| */ | |
| if (testing_nmi) { | |
| testing_nmi = 2; | |
| return NMI_HANDLED; | |
| } | |
| /* If we are not expecting a timeout, ignore it. */ | |
| if (ipmi_watchdog_state == WDOG_TIMEOUT_NONE) | |
| return NMI_DONE; | |
| if (preaction_val != WDOG_PRETIMEOUT_NMI) | |
| return NMI_DONE; | |
| /* | |
| * If no one else handled the NMI, we assume it was the IPMI | |
| * watchdog. | |
| */ | |
| if (preop_val == WDOG_PREOP_PANIC) { | |
| /* On some machines, the heartbeat will give | |
| an error and not work unless we re-enable | |
| the timer. So do so. */ | |
| pretimeout_since_last_heartbeat = 1; | |
| if (atomic_inc_and_test(&preop_panic_excl)) | |
| panic(PFX "pre-timeout"); | |
| } | |
| return NMI_HANDLED; | |
| } | |
| #endif | |
| static int wdog_reboot_handler(struct notifier_block *this, | |
| unsigned long code, | |
| void *unused) | |
| { | |
| static int reboot_event_handled; | |
| if ((watchdog_user) && (!reboot_event_handled)) { | |
| /* Make sure we only do this once. */ | |
| reboot_event_handled = 1; | |
| if (code == SYS_POWER_OFF || code == SYS_HALT) { | |
| /* Disable the WDT if we are shutting down. */ | |
| ipmi_watchdog_state = WDOG_TIMEOUT_NONE; | |
| ipmi_set_timeout(IPMI_SET_TIMEOUT_NO_HB); | |
| } else if (ipmi_watchdog_state != WDOG_TIMEOUT_NONE) { | |
| /* Set a long timer to let the reboot happens, but | |
| reboot if it hangs, but only if the watchdog | |
| timer was already running. */ | |
| timeout = 120; | |
| pretimeout = 0; | |
| ipmi_watchdog_state = WDOG_TIMEOUT_RESET; | |
| ipmi_set_timeout(IPMI_SET_TIMEOUT_NO_HB); | |
| } | |
| } | |
| return NOTIFY_OK; | |
| } | |
| static struct notifier_block wdog_reboot_notifier = { | |
| .notifier_call = wdog_reboot_handler, | |
| .next = NULL, | |
| .priority = 0 | |
| }; | |
| static int wdog_panic_handler(struct notifier_block *this, | |
| unsigned long event, | |
| void *unused) | |
| { | |
| static int panic_event_handled; | |
| /* On a panic, if we have a panic timeout, make sure to extend | |
| the watchdog timer to a reasonable value to complete the | |
| panic, if the watchdog timer is running. Plus the | |
| pretimeout is meaningless at panic time. */ | |
| if (watchdog_user && !panic_event_handled && | |
| ipmi_watchdog_state != WDOG_TIMEOUT_NONE) { | |
| /* Make sure we do this only once. */ | |
| panic_event_handled = 1; | |
| timeout = panic_wdt_timeout; | |
| pretimeout = 0; | |
| panic_halt_ipmi_set_timeout(); | |
| } | |
| return NOTIFY_OK; | |
| } | |
| static struct notifier_block wdog_panic_notifier = { | |
| .notifier_call = wdog_panic_handler, | |
| .next = NULL, | |
| .priority = 150 /* priority: INT_MAX >= x >= 0 */ | |
| }; | |
| static void ipmi_new_smi(int if_num, struct device *device) | |
| { | |
| ipmi_register_watchdog(if_num); | |
| } | |
| static void ipmi_smi_gone(int if_num) | |
| { | |
| ipmi_unregister_watchdog(if_num); | |
| } | |
| static struct ipmi_smi_watcher smi_watcher = { | |
| .owner = THIS_MODULE, | |
| .new_smi = ipmi_new_smi, | |
| .smi_gone = ipmi_smi_gone | |
| }; | |
| static int action_op(const char *inval, char *outval) | |
| { | |
| if (outval) | |
| strcpy(outval, action); | |
| if (!inval) | |
| return 0; | |
| if (strcmp(inval, "reset") == 0) | |
| action_val = WDOG_TIMEOUT_RESET; | |
| else if (strcmp(inval, "none") == 0) | |
| action_val = WDOG_TIMEOUT_NONE; | |
| else if (strcmp(inval, "power_cycle") == 0) | |
| action_val = WDOG_TIMEOUT_POWER_CYCLE; | |
| else if (strcmp(inval, "power_off") == 0) | |
| action_val = WDOG_TIMEOUT_POWER_DOWN; | |
| else | |
| return -EINVAL; | |
| strcpy(action, inval); | |
| return 0; | |
| } | |
| static int preaction_op(const char *inval, char *outval) | |
| { | |
| if (outval) | |
| strcpy(outval, preaction); | |
| if (!inval) | |
| return 0; | |
| if (strcmp(inval, "pre_none") == 0) | |
| preaction_val = WDOG_PRETIMEOUT_NONE; | |
| else if (strcmp(inval, "pre_smi") == 0) | |
| preaction_val = WDOG_PRETIMEOUT_SMI; | |
| #ifdef HAVE_DIE_NMI | |
| else if (strcmp(inval, "pre_nmi") == 0) | |
| preaction_val = WDOG_PRETIMEOUT_NMI; | |
| #endif | |
| else if (strcmp(inval, "pre_int") == 0) | |
| preaction_val = WDOG_PRETIMEOUT_MSG_INT; | |
| else | |
| return -EINVAL; | |
| strcpy(preaction, inval); | |
| return 0; | |
| } | |
| static int preop_op(const char *inval, char *outval) | |
| { | |
| if (outval) | |
| strcpy(outval, preop); | |
| if (!inval) | |
| return 0; | |
| if (strcmp(inval, "preop_none") == 0) | |
| preop_val = WDOG_PREOP_NONE; | |
| else if (strcmp(inval, "preop_panic") == 0) | |
| preop_val = WDOG_PREOP_PANIC; | |
| else if (strcmp(inval, "preop_give_data") == 0) | |
| preop_val = WDOG_PREOP_GIVE_DATA; | |
| else | |
| return -EINVAL; | |
| strcpy(preop, inval); | |
| return 0; | |
| } | |
| static void check_parms(void) | |
| { | |
| #ifdef HAVE_DIE_NMI | |
| int do_nmi = 0; | |
| int rv; | |
| if (preaction_val == WDOG_PRETIMEOUT_NMI) { | |
| do_nmi = 1; | |
| if (preop_val == WDOG_PREOP_GIVE_DATA) { | |
| printk(KERN_WARNING PFX "Pretimeout op is to give data" | |
| " but NMI pretimeout is enabled, setting" | |
| " pretimeout op to none\n"); | |
| preop_op("preop_none", NULL); | |
| do_nmi = 0; | |
| } | |
| } | |
| if (do_nmi && !nmi_handler_registered) { | |
| rv = register_nmi_handler(NMI_UNKNOWN, ipmi_nmi, 0, | |
| "ipmi"); | |
| if (rv) { | |
| printk(KERN_WARNING PFX | |
| "Can't register nmi handler\n"); | |
| return; | |
| } else | |
| nmi_handler_registered = 1; | |
| } else if (!do_nmi && nmi_handler_registered) { | |
| unregister_nmi_handler(NMI_UNKNOWN, "ipmi"); | |
| nmi_handler_registered = 0; | |
| } | |
| #endif | |
| } | |
| static int __init ipmi_wdog_init(void) | |
| { | |
| int rv; | |
| if (action_op(action, NULL)) { | |
| action_op("reset", NULL); | |
| printk(KERN_INFO PFX "Unknown action '%s', defaulting to" | |
| " reset\n", action); | |
| } | |
| if (preaction_op(preaction, NULL)) { | |
| preaction_op("pre_none", NULL); | |
| printk(KERN_INFO PFX "Unknown preaction '%s', defaulting to" | |
| " none\n", preaction); | |
| } | |
| if (preop_op(preop, NULL)) { | |
| preop_op("preop_none", NULL); | |
| printk(KERN_INFO PFX "Unknown preop '%s', defaulting to" | |
| " none\n", preop); | |
| } | |
| check_parms(); | |
| register_reboot_notifier(&wdog_reboot_notifier); | |
| atomic_notifier_chain_register(&panic_notifier_list, | |
| &wdog_panic_notifier); | |
| rv = ipmi_smi_watcher_register(&smi_watcher); | |
| if (rv) { | |
| #ifdef HAVE_DIE_NMI | |
| if (nmi_handler_registered) | |
| unregister_nmi_handler(NMI_UNKNOWN, "ipmi"); | |
| #endif | |
| atomic_notifier_chain_unregister(&panic_notifier_list, | |
| &wdog_panic_notifier); | |
| unregister_reboot_notifier(&wdog_reboot_notifier); | |
| printk(KERN_WARNING PFX "can't register smi watcher\n"); | |
| return rv; | |
| } | |
| printk(KERN_INFO PFX "driver initialized\n"); | |
| return 0; | |
| } | |
| static void __exit ipmi_wdog_exit(void) | |
| { | |
| ipmi_smi_watcher_unregister(&smi_watcher); | |
| ipmi_unregister_watchdog(watchdog_ifnum); | |
| #ifdef HAVE_DIE_NMI | |
| if (nmi_handler_registered) | |
| unregister_nmi_handler(NMI_UNKNOWN, "ipmi"); | |
| #endif | |
| atomic_notifier_chain_unregister(&panic_notifier_list, | |
| &wdog_panic_notifier); | |
| unregister_reboot_notifier(&wdog_reboot_notifier); | |
| } | |
| module_exit(ipmi_wdog_exit); | |
| module_init(ipmi_wdog_init); | |
| MODULE_LICENSE("GPL"); | |
| MODULE_AUTHOR("Corey Minyard <minyard@mvista.com>"); | |
| MODULE_DESCRIPTION("watchdog timer based upon the IPMI interface."); |