| /* | |
| * PCI driver for the High Speed UART DMA | |
| * | |
| * Copyright (C) 2015 Intel Corporation | |
| * Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com> | |
| * | |
| * Partially based on the bits found in drivers/tty/serial/mfd.c. | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License version 2 as | |
| * published by the Free Software Foundation. | |
| */ | |
| #include <linux/bitops.h> | |
| #include <linux/device.h> | |
| #include <linux/module.h> | |
| #include <linux/pci.h> | |
| #include "hsu.h" | |
| #define HSU_PCI_DMASR 0x00 | |
| #define HSU_PCI_DMAISR 0x04 | |
| #define HSU_PCI_CHAN_OFFSET 0x100 | |
| static irqreturn_t hsu_pci_irq(int irq, void *dev) | |
| { | |
| struct hsu_dma_chip *chip = dev; | |
| u32 dmaisr; | |
| unsigned short i; | |
| irqreturn_t ret = IRQ_NONE; | |
| dmaisr = readl(chip->regs + HSU_PCI_DMAISR); | |
| for (i = 0; i < chip->hsu->nr_channels; i++) { | |
| if (dmaisr & 0x1) | |
| ret |= hsu_dma_irq(chip, i); | |
| dmaisr >>= 1; | |
| } | |
| return ret; | |
| } | |
| static int hsu_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) | |
| { | |
| struct hsu_dma_chip *chip; | |
| int ret; | |
| ret = pcim_enable_device(pdev); | |
| if (ret) | |
| return ret; | |
| ret = pcim_iomap_regions(pdev, BIT(0), pci_name(pdev)); | |
| if (ret) { | |
| dev_err(&pdev->dev, "I/O memory remapping failed\n"); | |
| return ret; | |
| } | |
| pci_set_master(pdev); | |
| pci_try_set_mwi(pdev); | |
| ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)); | |
| if (ret) | |
| return ret; | |
| ret = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)); | |
| if (ret) | |
| return ret; | |
| chip = devm_kzalloc(&pdev->dev, sizeof(*chip), GFP_KERNEL); | |
| if (!chip) | |
| return -ENOMEM; | |
| chip->dev = &pdev->dev; | |
| chip->regs = pcim_iomap_table(pdev)[0]; | |
| chip->length = pci_resource_len(pdev, 0); | |
| chip->offset = HSU_PCI_CHAN_OFFSET; | |
| chip->irq = pdev->irq; | |
| pci_enable_msi(pdev); | |
| ret = hsu_dma_probe(chip); | |
| if (ret) | |
| return ret; | |
| ret = request_irq(chip->irq, hsu_pci_irq, 0, "hsu_dma_pci", chip); | |
| if (ret) | |
| goto err_register_irq; | |
| pci_set_drvdata(pdev, chip); | |
| return 0; | |
| err_register_irq: | |
| hsu_dma_remove(chip); | |
| return ret; | |
| } | |
| static void hsu_pci_remove(struct pci_dev *pdev) | |
| { | |
| struct hsu_dma_chip *chip = pci_get_drvdata(pdev); | |
| free_irq(chip->irq, chip); | |
| hsu_dma_remove(chip); | |
| } | |
| static const struct pci_device_id hsu_pci_id_table[] = { | |
| { PCI_VDEVICE(INTEL, 0x081e), 0 }, | |
| { PCI_VDEVICE(INTEL, 0x1192), 0 }, | |
| { } | |
| }; | |
| MODULE_DEVICE_TABLE(pci, hsu_pci_id_table); | |
| static struct pci_driver hsu_pci_driver = { | |
| .name = "hsu_dma_pci", | |
| .id_table = hsu_pci_id_table, | |
| .probe = hsu_pci_probe, | |
| .remove = hsu_pci_remove, | |
| }; | |
| module_pci_driver(hsu_pci_driver); | |
| MODULE_LICENSE("GPL v2"); | |
| MODULE_DESCRIPTION("High Speed UART DMA PCI driver"); | |
| MODULE_AUTHOR("Andy Shevchenko <andriy.shevchenko@linux.intel.com>"); |