| /* | |
| * Copyright 2010 Google Inc. All Rights Reserved. | |
| * Author: dlaurie@google.com (Duncan Laurie) | |
| * | |
| * Re-worked to expose sysfs APIs by mikew@google.com (Mike Waychison) | |
| * | |
| * EFI SMI interface for Google platforms | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/init.h> | |
| #include <linux/types.h> | |
| #include <linux/device.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/errno.h> | |
| #include <linux/string.h> | |
| #include <linux/spinlock.h> | |
| #include <linux/dma-mapping.h> | |
| #include <linux/dmapool.h> | |
| #include <linux/fs.h> | |
| #include <linux/slab.h> | |
| #include <linux/ioctl.h> | |
| #include <linux/acpi.h> | |
| #include <linux/io.h> | |
| #include <linux/uaccess.h> | |
| #include <linux/dmi.h> | |
| #include <linux/kdebug.h> | |
| #include <linux/reboot.h> | |
| #include <linux/efi.h> | |
| #include <linux/module.h> | |
| #include <linux/ucs2_string.h> | |
| #define GSMI_SHUTDOWN_CLEAN 0 /* Clean Shutdown */ | |
| /* TODO(mikew@google.com): Tie in HARDLOCKUP_DETECTOR with NMIWDT */ | |
| #define GSMI_SHUTDOWN_NMIWDT 1 /* NMI Watchdog */ | |
| #define GSMI_SHUTDOWN_PANIC 2 /* Panic */ | |
| #define GSMI_SHUTDOWN_OOPS 3 /* Oops */ | |
| #define GSMI_SHUTDOWN_DIE 4 /* Die -- No longer meaningful */ | |
| #define GSMI_SHUTDOWN_MCE 5 /* Machine Check */ | |
| #define GSMI_SHUTDOWN_SOFTWDT 6 /* Software Watchdog */ | |
| #define GSMI_SHUTDOWN_MBE 7 /* Uncorrected ECC */ | |
| #define GSMI_SHUTDOWN_TRIPLE 8 /* Triple Fault */ | |
| #define DRIVER_VERSION "1.0" | |
| #define GSMI_GUID_SIZE 16 | |
| #define GSMI_BUF_SIZE 1024 | |
| #define GSMI_BUF_ALIGN sizeof(u64) | |
| #define GSMI_CALLBACK 0xef | |
| /* SMI return codes */ | |
| #define GSMI_SUCCESS 0x00 | |
| #define GSMI_UNSUPPORTED2 0x03 | |
| #define GSMI_LOG_FULL 0x0b | |
| #define GSMI_VAR_NOT_FOUND 0x0e | |
| #define GSMI_HANDSHAKE_SPIN 0x7d | |
| #define GSMI_HANDSHAKE_CF 0x7e | |
| #define GSMI_HANDSHAKE_NONE 0x7f | |
| #define GSMI_INVALID_PARAMETER 0x82 | |
| #define GSMI_UNSUPPORTED 0x83 | |
| #define GSMI_BUFFER_TOO_SMALL 0x85 | |
| #define GSMI_NOT_READY 0x86 | |
| #define GSMI_DEVICE_ERROR 0x87 | |
| #define GSMI_NOT_FOUND 0x8e | |
| #define QUIRKY_BOARD_HASH 0x78a30a50 | |
| /* Internally used commands passed to the firmware */ | |
| #define GSMI_CMD_GET_NVRAM_VAR 0x01 | |
| #define GSMI_CMD_GET_NEXT_VAR 0x02 | |
| #define GSMI_CMD_SET_NVRAM_VAR 0x03 | |
| #define GSMI_CMD_SET_EVENT_LOG 0x08 | |
| #define GSMI_CMD_CLEAR_EVENT_LOG 0x09 | |
| #define GSMI_CMD_CLEAR_CONFIG 0x20 | |
| #define GSMI_CMD_HANDSHAKE_TYPE 0xC1 | |
| /* Magic entry type for kernel events */ | |
| #define GSMI_LOG_ENTRY_TYPE_KERNEL 0xDEAD | |
| /* SMI buffers must be in 32bit physical address space */ | |
| struct gsmi_buf { | |
| u8 *start; /* start of buffer */ | |
| size_t length; /* length of buffer */ | |
| dma_addr_t handle; /* dma allocation handle */ | |
| u32 address; /* physical address of buffer */ | |
| }; | |
| struct gsmi_device { | |
| struct platform_device *pdev; /* platform device */ | |
| struct gsmi_buf *name_buf; /* variable name buffer */ | |
| struct gsmi_buf *data_buf; /* generic data buffer */ | |
| struct gsmi_buf *param_buf; /* parameter buffer */ | |
| spinlock_t lock; /* serialize access to SMIs */ | |
| u16 smi_cmd; /* SMI command port */ | |
| int handshake_type; /* firmware handler interlock type */ | |
| struct dma_pool *dma_pool; /* DMA buffer pool */ | |
| } gsmi_dev; | |
| /* Packed structures for communicating with the firmware */ | |
| struct gsmi_nvram_var_param { | |
| efi_guid_t guid; | |
| u32 name_ptr; | |
| u32 attributes; | |
| u32 data_len; | |
| u32 data_ptr; | |
| } __packed; | |
| struct gsmi_get_next_var_param { | |
| u8 guid[GSMI_GUID_SIZE]; | |
| u32 name_ptr; | |
| u32 name_len; | |
| } __packed; | |
| struct gsmi_set_eventlog_param { | |
| u32 data_ptr; | |
| u32 data_len; | |
| u32 type; | |
| } __packed; | |
| /* Event log formats */ | |
| struct gsmi_log_entry_type_1 { | |
| u16 type; | |
| u32 instance; | |
| } __packed; | |
| /* | |
| * Some platforms don't have explicit SMI handshake | |
| * and need to wait for SMI to complete. | |
| */ | |
| #define GSMI_DEFAULT_SPINCOUNT 0x10000 | |
| static unsigned int spincount = GSMI_DEFAULT_SPINCOUNT; | |
| module_param(spincount, uint, 0600); | |
| MODULE_PARM_DESC(spincount, | |
| "The number of loop iterations to use when using the spin handshake."); | |
| static struct gsmi_buf *gsmi_buf_alloc(void) | |
| { | |
| struct gsmi_buf *smibuf; | |
| smibuf = kzalloc(sizeof(*smibuf), GFP_KERNEL); | |
| if (!smibuf) { | |
| printk(KERN_ERR "gsmi: out of memory\n"); | |
| return NULL; | |
| } | |
| /* allocate buffer in 32bit address space */ | |
| smibuf->start = dma_pool_alloc(gsmi_dev.dma_pool, GFP_KERNEL, | |
| &smibuf->handle); | |
| if (!smibuf->start) { | |
| printk(KERN_ERR "gsmi: failed to allocate name buffer\n"); | |
| kfree(smibuf); | |
| return NULL; | |
| } | |
| /* fill in the buffer handle */ | |
| smibuf->length = GSMI_BUF_SIZE; | |
| smibuf->address = (u32)virt_to_phys(smibuf->start); | |
| return smibuf; | |
| } | |
| static void gsmi_buf_free(struct gsmi_buf *smibuf) | |
| { | |
| if (smibuf) { | |
| if (smibuf->start) | |
| dma_pool_free(gsmi_dev.dma_pool, smibuf->start, | |
| smibuf->handle); | |
| kfree(smibuf); | |
| } | |
| } | |
| /* | |
| * Make a call to gsmi func(sub). GSMI error codes are translated to | |
| * in-kernel errnos (0 on success, -ERRNO on error). | |
| */ | |
| static int gsmi_exec(u8 func, u8 sub) | |
| { | |
| u16 cmd = (sub << 8) | func; | |
| u16 result = 0; | |
| int rc = 0; | |
| /* | |
| * AH : Subfunction number | |
| * AL : Function number | |
| * EBX : Parameter block address | |
| * DX : SMI command port | |
| * | |
| * Three protocols here. See also the comment in gsmi_init(). | |
| */ | |
| if (gsmi_dev.handshake_type == GSMI_HANDSHAKE_CF) { | |
| /* | |
| * If handshake_type == HANDSHAKE_CF then set CF on the | |
| * way in and wait for the handler to clear it; this avoids | |
| * corrupting register state on those chipsets which have | |
| * a delay between writing the SMI trigger register and | |
| * entering SMM. | |
| */ | |
| asm volatile ( | |
| "stc\n" | |
| "outb %%al, %%dx\n" | |
| "1: jc 1b\n" | |
| : "=a" (result) | |
| : "0" (cmd), | |
| "d" (gsmi_dev.smi_cmd), | |
| "b" (gsmi_dev.param_buf->address) | |
| : "memory", "cc" | |
| ); | |
| } else if (gsmi_dev.handshake_type == GSMI_HANDSHAKE_SPIN) { | |
| /* | |
| * If handshake_type == HANDSHAKE_SPIN we spin a | |
| * hundred-ish usecs to ensure the SMI has triggered. | |
| */ | |
| asm volatile ( | |
| "outb %%al, %%dx\n" | |
| "1: loop 1b\n" | |
| : "=a" (result) | |
| : "0" (cmd), | |
| "d" (gsmi_dev.smi_cmd), | |
| "b" (gsmi_dev.param_buf->address), | |
| "c" (spincount) | |
| : "memory", "cc" | |
| ); | |
| } else { | |
| /* | |
| * If handshake_type == HANDSHAKE_NONE we do nothing; | |
| * either we don't need to or it's legacy firmware that | |
| * doesn't understand the CF protocol. | |
| */ | |
| asm volatile ( | |
| "outb %%al, %%dx\n\t" | |
| : "=a" (result) | |
| : "0" (cmd), | |
| "d" (gsmi_dev.smi_cmd), | |
| "b" (gsmi_dev.param_buf->address) | |
| : "memory", "cc" | |
| ); | |
| } | |
| /* check return code from SMI handler */ | |
| switch (result) { | |
| case GSMI_SUCCESS: | |
| break; | |
| case GSMI_VAR_NOT_FOUND: | |
| /* not really an error, but let the caller know */ | |
| rc = 1; | |
| break; | |
| case GSMI_INVALID_PARAMETER: | |
| printk(KERN_ERR "gsmi: exec 0x%04x: Invalid parameter\n", cmd); | |
| rc = -EINVAL; | |
| break; | |
| case GSMI_BUFFER_TOO_SMALL: | |
| printk(KERN_ERR "gsmi: exec 0x%04x: Buffer too small\n", cmd); | |
| rc = -ENOMEM; | |
| break; | |
| case GSMI_UNSUPPORTED: | |
| case GSMI_UNSUPPORTED2: | |
| if (sub != GSMI_CMD_HANDSHAKE_TYPE) | |
| printk(KERN_ERR "gsmi: exec 0x%04x: Not supported\n", | |
| cmd); | |
| rc = -ENOSYS; | |
| break; | |
| case GSMI_NOT_READY: | |
| printk(KERN_ERR "gsmi: exec 0x%04x: Not ready\n", cmd); | |
| rc = -EBUSY; | |
| break; | |
| case GSMI_DEVICE_ERROR: | |
| printk(KERN_ERR "gsmi: exec 0x%04x: Device error\n", cmd); | |
| rc = -EFAULT; | |
| break; | |
| case GSMI_NOT_FOUND: | |
| printk(KERN_ERR "gsmi: exec 0x%04x: Data not found\n", cmd); | |
| rc = -ENOENT; | |
| break; | |
| case GSMI_LOG_FULL: | |
| printk(KERN_ERR "gsmi: exec 0x%04x: Log full\n", cmd); | |
| rc = -ENOSPC; | |
| break; | |
| case GSMI_HANDSHAKE_CF: | |
| case GSMI_HANDSHAKE_SPIN: | |
| case GSMI_HANDSHAKE_NONE: | |
| rc = result; | |
| break; | |
| default: | |
| printk(KERN_ERR "gsmi: exec 0x%04x: Unknown error 0x%04x\n", | |
| cmd, result); | |
| rc = -ENXIO; | |
| } | |
| return rc; | |
| } | |
| static efi_status_t gsmi_get_variable(efi_char16_t *name, | |
| efi_guid_t *vendor, u32 *attr, | |
| unsigned long *data_size, | |
| void *data) | |
| { | |
| struct gsmi_nvram_var_param param = { | |
| .name_ptr = gsmi_dev.name_buf->address, | |
| .data_ptr = gsmi_dev.data_buf->address, | |
| .data_len = (u32)*data_size, | |
| }; | |
| efi_status_t ret = EFI_SUCCESS; | |
| unsigned long flags; | |
| size_t name_len = ucs2_strnlen(name, GSMI_BUF_SIZE / 2); | |
| int rc; | |
| if (name_len >= GSMI_BUF_SIZE / 2) | |
| return EFI_BAD_BUFFER_SIZE; | |
| spin_lock_irqsave(&gsmi_dev.lock, flags); | |
| /* Vendor guid */ | |
| memcpy(¶m.guid, vendor, sizeof(param.guid)); | |
| /* variable name, already in UTF-16 */ | |
| memset(gsmi_dev.name_buf->start, 0, gsmi_dev.name_buf->length); | |
| memcpy(gsmi_dev.name_buf->start, name, name_len * 2); | |
| /* data pointer */ | |
| memset(gsmi_dev.data_buf->start, 0, gsmi_dev.data_buf->length); | |
| /* parameter buffer */ | |
| memset(gsmi_dev.param_buf->start, 0, gsmi_dev.param_buf->length); | |
| memcpy(gsmi_dev.param_buf->start, ¶m, sizeof(param)); | |
| rc = gsmi_exec(GSMI_CALLBACK, GSMI_CMD_GET_NVRAM_VAR); | |
| if (rc < 0) { | |
| printk(KERN_ERR "gsmi: Get Variable failed\n"); | |
| ret = EFI_LOAD_ERROR; | |
| } else if (rc == 1) { | |
| /* variable was not found */ | |
| ret = EFI_NOT_FOUND; | |
| } else { | |
| /* Get the arguments back */ | |
| memcpy(¶m, gsmi_dev.param_buf->start, sizeof(param)); | |
| /* The size reported is the min of all of our buffers */ | |
| *data_size = min_t(unsigned long, *data_size, | |
| gsmi_dev.data_buf->length); | |
| *data_size = min_t(unsigned long, *data_size, param.data_len); | |
| /* Copy data back to return buffer. */ | |
| memcpy(data, gsmi_dev.data_buf->start, *data_size); | |
| /* All variables are have the following attributes */ | |
| *attr = EFI_VARIABLE_NON_VOLATILE | | |
| EFI_VARIABLE_BOOTSERVICE_ACCESS | | |
| EFI_VARIABLE_RUNTIME_ACCESS; | |
| } | |
| spin_unlock_irqrestore(&gsmi_dev.lock, flags); | |
| return ret; | |
| } | |
| static efi_status_t gsmi_get_next_variable(unsigned long *name_size, | |
| efi_char16_t *name, | |
| efi_guid_t *vendor) | |
| { | |
| struct gsmi_get_next_var_param param = { | |
| .name_ptr = gsmi_dev.name_buf->address, | |
| .name_len = gsmi_dev.name_buf->length, | |
| }; | |
| efi_status_t ret = EFI_SUCCESS; | |
| int rc; | |
| unsigned long flags; | |
| /* For the moment, only support buffers that exactly match in size */ | |
| if (*name_size != GSMI_BUF_SIZE) | |
| return EFI_BAD_BUFFER_SIZE; | |
| /* Let's make sure the thing is at least null-terminated */ | |
| if (ucs2_strnlen(name, GSMI_BUF_SIZE / 2) == GSMI_BUF_SIZE / 2) | |
| return EFI_INVALID_PARAMETER; | |
| spin_lock_irqsave(&gsmi_dev.lock, flags); | |
| /* guid */ | |
| memcpy(¶m.guid, vendor, sizeof(param.guid)); | |
| /* variable name, already in UTF-16 */ | |
| memcpy(gsmi_dev.name_buf->start, name, *name_size); | |
| /* parameter buffer */ | |
| memset(gsmi_dev.param_buf->start, 0, gsmi_dev.param_buf->length); | |
| memcpy(gsmi_dev.param_buf->start, ¶m, sizeof(param)); | |
| rc = gsmi_exec(GSMI_CALLBACK, GSMI_CMD_GET_NEXT_VAR); | |
| if (rc < 0) { | |
| printk(KERN_ERR "gsmi: Get Next Variable Name failed\n"); | |
| ret = EFI_LOAD_ERROR; | |
| } else if (rc == 1) { | |
| /* variable not found -- end of list */ | |
| ret = EFI_NOT_FOUND; | |
| } else { | |
| /* copy variable data back to return buffer */ | |
| memcpy(¶m, gsmi_dev.param_buf->start, sizeof(param)); | |
| /* Copy the name back */ | |
| memcpy(name, gsmi_dev.name_buf->start, GSMI_BUF_SIZE); | |
| *name_size = ucs2_strnlen(name, GSMI_BUF_SIZE / 2) * 2; | |
| /* copy guid to return buffer */ | |
| memcpy(vendor, ¶m.guid, sizeof(param.guid)); | |
| ret = EFI_SUCCESS; | |
| } | |
| spin_unlock_irqrestore(&gsmi_dev.lock, flags); | |
| return ret; | |
| } | |
| static efi_status_t gsmi_set_variable(efi_char16_t *name, | |
| efi_guid_t *vendor, | |
| u32 attr, | |
| unsigned long data_size, | |
| void *data) | |
| { | |
| struct gsmi_nvram_var_param param = { | |
| .name_ptr = gsmi_dev.name_buf->address, | |
| .data_ptr = gsmi_dev.data_buf->address, | |
| .data_len = (u32)data_size, | |
| .attributes = EFI_VARIABLE_NON_VOLATILE | | |
| EFI_VARIABLE_BOOTSERVICE_ACCESS | | |
| EFI_VARIABLE_RUNTIME_ACCESS, | |
| }; | |
| size_t name_len = ucs2_strnlen(name, GSMI_BUF_SIZE / 2); | |
| efi_status_t ret = EFI_SUCCESS; | |
| int rc; | |
| unsigned long flags; | |
| if (name_len >= GSMI_BUF_SIZE / 2) | |
| return EFI_BAD_BUFFER_SIZE; | |
| spin_lock_irqsave(&gsmi_dev.lock, flags); | |
| /* guid */ | |
| memcpy(¶m.guid, vendor, sizeof(param.guid)); | |
| /* variable name, already in UTF-16 */ | |
| memset(gsmi_dev.name_buf->start, 0, gsmi_dev.name_buf->length); | |
| memcpy(gsmi_dev.name_buf->start, name, name_len * 2); | |
| /* data pointer */ | |
| memset(gsmi_dev.data_buf->start, 0, gsmi_dev.data_buf->length); | |
| memcpy(gsmi_dev.data_buf->start, data, data_size); | |
| /* parameter buffer */ | |
| memset(gsmi_dev.param_buf->start, 0, gsmi_dev.param_buf->length); | |
| memcpy(gsmi_dev.param_buf->start, ¶m, sizeof(param)); | |
| rc = gsmi_exec(GSMI_CALLBACK, GSMI_CMD_SET_NVRAM_VAR); | |
| if (rc < 0) { | |
| printk(KERN_ERR "gsmi: Set Variable failed\n"); | |
| ret = EFI_INVALID_PARAMETER; | |
| } | |
| spin_unlock_irqrestore(&gsmi_dev.lock, flags); | |
| return ret; | |
| } | |
| static const struct efivar_operations efivar_ops = { | |
| .get_variable = gsmi_get_variable, | |
| .set_variable = gsmi_set_variable, | |
| .get_next_variable = gsmi_get_next_variable, | |
| }; | |
| static ssize_t eventlog_write(struct file *filp, struct kobject *kobj, | |
| struct bin_attribute *bin_attr, | |
| char *buf, loff_t pos, size_t count) | |
| { | |
| struct gsmi_set_eventlog_param param = { | |
| .data_ptr = gsmi_dev.data_buf->address, | |
| }; | |
| int rc = 0; | |
| unsigned long flags; | |
| /* Pull the type out */ | |
| if (count < sizeof(u32)) | |
| return -EINVAL; | |
| param.type = *(u32 *)buf; | |
| count -= sizeof(u32); | |
| buf += sizeof(u32); | |
| /* The remaining buffer is the data payload */ | |
| if (count > gsmi_dev.data_buf->length) | |
| return -EINVAL; | |
| param.data_len = count - sizeof(u32); | |
| spin_lock_irqsave(&gsmi_dev.lock, flags); | |
| /* data pointer */ | |
| memset(gsmi_dev.data_buf->start, 0, gsmi_dev.data_buf->length); | |
| memcpy(gsmi_dev.data_buf->start, buf, param.data_len); | |
| /* parameter buffer */ | |
| memset(gsmi_dev.param_buf->start, 0, gsmi_dev.param_buf->length); | |
| memcpy(gsmi_dev.param_buf->start, ¶m, sizeof(param)); | |
| rc = gsmi_exec(GSMI_CALLBACK, GSMI_CMD_SET_EVENT_LOG); | |
| if (rc < 0) | |
| printk(KERN_ERR "gsmi: Set Event Log failed\n"); | |
| spin_unlock_irqrestore(&gsmi_dev.lock, flags); | |
| return rc; | |
| } | |
| static struct bin_attribute eventlog_bin_attr = { | |
| .attr = {.name = "append_to_eventlog", .mode = 0200}, | |
| .write = eventlog_write, | |
| }; | |
| static ssize_t gsmi_clear_eventlog_store(struct kobject *kobj, | |
| struct kobj_attribute *attr, | |
| const char *buf, size_t count) | |
| { | |
| int rc; | |
| unsigned long flags; | |
| unsigned long val; | |
| struct { | |
| u32 percentage; | |
| u32 data_type; | |
| } param; | |
| rc = kstrtoul(buf, 0, &val); | |
| if (rc) | |
| return rc; | |
| /* | |
| * Value entered is a percentage, 0 through 100, anything else | |
| * is invalid. | |
| */ | |
| if (val > 100) | |
| return -EINVAL; | |
| /* data_type here selects the smbios event log. */ | |
| param.percentage = val; | |
| param.data_type = 0; | |
| spin_lock_irqsave(&gsmi_dev.lock, flags); | |
| /* parameter buffer */ | |
| memset(gsmi_dev.param_buf->start, 0, gsmi_dev.param_buf->length); | |
| memcpy(gsmi_dev.param_buf->start, ¶m, sizeof(param)); | |
| rc = gsmi_exec(GSMI_CALLBACK, GSMI_CMD_CLEAR_EVENT_LOG); | |
| spin_unlock_irqrestore(&gsmi_dev.lock, flags); | |
| if (rc) | |
| return rc; | |
| return count; | |
| } | |
| static struct kobj_attribute gsmi_clear_eventlog_attr = { | |
| .attr = {.name = "clear_eventlog", .mode = 0200}, | |
| .store = gsmi_clear_eventlog_store, | |
| }; | |
| static ssize_t gsmi_clear_config_store(struct kobject *kobj, | |
| struct kobj_attribute *attr, | |
| const char *buf, size_t count) | |
| { | |
| int rc; | |
| unsigned long flags; | |
| spin_lock_irqsave(&gsmi_dev.lock, flags); | |
| /* clear parameter buffer */ | |
| memset(gsmi_dev.param_buf->start, 0, gsmi_dev.param_buf->length); | |
| rc = gsmi_exec(GSMI_CALLBACK, GSMI_CMD_CLEAR_CONFIG); | |
| spin_unlock_irqrestore(&gsmi_dev.lock, flags); | |
| if (rc) | |
| return rc; | |
| return count; | |
| } | |
| static struct kobj_attribute gsmi_clear_config_attr = { | |
| .attr = {.name = "clear_config", .mode = 0200}, | |
| .store = gsmi_clear_config_store, | |
| }; | |
| static const struct attribute *gsmi_attrs[] = { | |
| &gsmi_clear_config_attr.attr, | |
| &gsmi_clear_eventlog_attr.attr, | |
| NULL, | |
| }; | |
| static int gsmi_shutdown_reason(int reason) | |
| { | |
| struct gsmi_log_entry_type_1 entry = { | |
| .type = GSMI_LOG_ENTRY_TYPE_KERNEL, | |
| .instance = reason, | |
| }; | |
| struct gsmi_set_eventlog_param param = { | |
| .data_len = sizeof(entry), | |
| .type = 1, | |
| }; | |
| static int saved_reason; | |
| int rc = 0; | |
| unsigned long flags; | |
| /* avoid duplicate entries in the log */ | |
| if (saved_reason & (1 << reason)) | |
| return 0; | |
| spin_lock_irqsave(&gsmi_dev.lock, flags); | |
| saved_reason |= (1 << reason); | |
| /* data pointer */ | |
| memset(gsmi_dev.data_buf->start, 0, gsmi_dev.data_buf->length); | |
| memcpy(gsmi_dev.data_buf->start, &entry, sizeof(entry)); | |
| /* parameter buffer */ | |
| param.data_ptr = gsmi_dev.data_buf->address; | |
| memset(gsmi_dev.param_buf->start, 0, gsmi_dev.param_buf->length); | |
| memcpy(gsmi_dev.param_buf->start, ¶m, sizeof(param)); | |
| rc = gsmi_exec(GSMI_CALLBACK, GSMI_CMD_SET_EVENT_LOG); | |
| spin_unlock_irqrestore(&gsmi_dev.lock, flags); | |
| if (rc < 0) | |
| printk(KERN_ERR "gsmi: Log Shutdown Reason failed\n"); | |
| else | |
| printk(KERN_EMERG "gsmi: Log Shutdown Reason 0x%02x\n", | |
| reason); | |
| return rc; | |
| } | |
| static int gsmi_reboot_callback(struct notifier_block *nb, | |
| unsigned long reason, void *arg) | |
| { | |
| gsmi_shutdown_reason(GSMI_SHUTDOWN_CLEAN); | |
| return NOTIFY_DONE; | |
| } | |
| static struct notifier_block gsmi_reboot_notifier = { | |
| .notifier_call = gsmi_reboot_callback | |
| }; | |
| static int gsmi_die_callback(struct notifier_block *nb, | |
| unsigned long reason, void *arg) | |
| { | |
| if (reason == DIE_OOPS) | |
| gsmi_shutdown_reason(GSMI_SHUTDOWN_OOPS); | |
| return NOTIFY_DONE; | |
| } | |
| static struct notifier_block gsmi_die_notifier = { | |
| .notifier_call = gsmi_die_callback | |
| }; | |
| static int gsmi_panic_callback(struct notifier_block *nb, | |
| unsigned long reason, void *arg) | |
| { | |
| gsmi_shutdown_reason(GSMI_SHUTDOWN_PANIC); | |
| return NOTIFY_DONE; | |
| } | |
| static struct notifier_block gsmi_panic_notifier = { | |
| .notifier_call = gsmi_panic_callback, | |
| }; | |
| /* | |
| * This hash function was blatantly copied from include/linux/hash.h. | |
| * It is used by this driver to obfuscate a board name that requires a | |
| * quirk within this driver. | |
| * | |
| * Please do not remove this copy of the function as any changes to the | |
| * global utility hash_64() function would break this driver's ability | |
| * to identify a board and provide the appropriate quirk -- mikew@google.com | |
| */ | |
| static u64 __init local_hash_64(u64 val, unsigned bits) | |
| { | |
| u64 hash = val; | |
| /* Sigh, gcc can't optimise this alone like it does for 32 bits. */ | |
| u64 n = hash; | |
| n <<= 18; | |
| hash -= n; | |
| n <<= 33; | |
| hash -= n; | |
| n <<= 3; | |
| hash += n; | |
| n <<= 3; | |
| hash -= n; | |
| n <<= 4; | |
| hash += n; | |
| n <<= 2; | |
| hash += n; | |
| /* High bits are more random, so use them. */ | |
| return hash >> (64 - bits); | |
| } | |
| static u32 __init hash_oem_table_id(char s[8]) | |
| { | |
| u64 input; | |
| memcpy(&input, s, 8); | |
| return local_hash_64(input, 32); | |
| } | |
| static struct dmi_system_id gsmi_dmi_table[] __initdata = { | |
| { | |
| .ident = "Google Board", | |
| .matches = { | |
| DMI_MATCH(DMI_BOARD_VENDOR, "Google, Inc."), | |
| }, | |
| }, | |
| {} | |
| }; | |
| MODULE_DEVICE_TABLE(dmi, gsmi_dmi_table); | |
| static __init int gsmi_system_valid(void) | |
| { | |
| u32 hash; | |
| if (!dmi_check_system(gsmi_dmi_table)) | |
| return -ENODEV; | |
| /* | |
| * Only newer firmware supports the gsmi interface. All older | |
| * firmware that didn't support this interface used to plug the | |
| * table name in the first four bytes of the oem_table_id field. | |
| * Newer firmware doesn't do that though, so use that as the | |
| * discriminant factor. We have to do this in order to | |
| * whitewash our board names out of the public driver. | |
| */ | |
| if (!strncmp(acpi_gbl_FADT.header.oem_table_id, "FACP", 4)) { | |
| printk(KERN_INFO "gsmi: Board is too old\n"); | |
| return -ENODEV; | |
| } | |
| /* Disable on board with 1.0 BIOS due to Google bug 2602657 */ | |
| hash = hash_oem_table_id(acpi_gbl_FADT.header.oem_table_id); | |
| if (hash == QUIRKY_BOARD_HASH) { | |
| const char *bios_ver = dmi_get_system_info(DMI_BIOS_VERSION); | |
| if (strncmp(bios_ver, "1.0", 3) == 0) { | |
| pr_info("gsmi: disabled on this board's BIOS %s\n", | |
| bios_ver); | |
| return -ENODEV; | |
| } | |
| } | |
| /* check for valid SMI command port in ACPI FADT */ | |
| if (acpi_gbl_FADT.smi_command == 0) { | |
| pr_info("gsmi: missing smi_command\n"); | |
| return -ENODEV; | |
| } | |
| /* Found */ | |
| return 0; | |
| } | |
| static struct kobject *gsmi_kobj; | |
| static struct efivars efivars; | |
| static const struct platform_device_info gsmi_dev_info = { | |
| .name = "gsmi", | |
| .id = -1, | |
| /* SMI callbacks require 32bit addresses */ | |
| .dma_mask = DMA_BIT_MASK(32), | |
| }; | |
| static __init int gsmi_init(void) | |
| { | |
| unsigned long flags; | |
| int ret; | |
| ret = gsmi_system_valid(); | |
| if (ret) | |
| return ret; | |
| gsmi_dev.smi_cmd = acpi_gbl_FADT.smi_command; | |
| /* register device */ | |
| gsmi_dev.pdev = platform_device_register_full(&gsmi_dev_info); | |
| if (IS_ERR(gsmi_dev.pdev)) { | |
| printk(KERN_ERR "gsmi: unable to register platform device\n"); | |
| return PTR_ERR(gsmi_dev.pdev); | |
| } | |
| /* SMI access needs to be serialized */ | |
| spin_lock_init(&gsmi_dev.lock); | |
| ret = -ENOMEM; | |
| gsmi_dev.dma_pool = dma_pool_create("gsmi", &gsmi_dev.pdev->dev, | |
| GSMI_BUF_SIZE, GSMI_BUF_ALIGN, 0); | |
| if (!gsmi_dev.dma_pool) | |
| goto out_err; | |
| /* | |
| * pre-allocate buffers because sometimes we are called when | |
| * this is not feasible: oops, panic, die, mce, etc | |
| */ | |
| gsmi_dev.name_buf = gsmi_buf_alloc(); | |
| if (!gsmi_dev.name_buf) { | |
| printk(KERN_ERR "gsmi: failed to allocate name buffer\n"); | |
| goto out_err; | |
| } | |
| gsmi_dev.data_buf = gsmi_buf_alloc(); | |
| if (!gsmi_dev.data_buf) { | |
| printk(KERN_ERR "gsmi: failed to allocate data buffer\n"); | |
| goto out_err; | |
| } | |
| gsmi_dev.param_buf = gsmi_buf_alloc(); | |
| if (!gsmi_dev.param_buf) { | |
| printk(KERN_ERR "gsmi: failed to allocate param buffer\n"); | |
| goto out_err; | |
| } | |
| /* | |
| * Determine type of handshake used to serialize the SMI | |
| * entry. See also gsmi_exec(). | |
| * | |
| * There's a "behavior" present on some chipsets where writing the | |
| * SMI trigger register in the southbridge doesn't result in an | |
| * immediate SMI. Rather, the processor can execute "a few" more | |
| * instructions before the SMI takes effect. To ensure synchronous | |
| * behavior, implement a handshake between the kernel driver and the | |
| * firmware handler to spin until released. This ioctl determines | |
| * the type of handshake. | |
| * | |
| * NONE: The firmware handler does not implement any | |
| * handshake. Either it doesn't need to, or it's legacy firmware | |
| * that doesn't know it needs to and never will. | |
| * | |
| * CF: The firmware handler will clear the CF in the saved | |
| * state before returning. The driver may set the CF and test for | |
| * it to clear before proceeding. | |
| * | |
| * SPIN: The firmware handler does not implement any handshake | |
| * but the driver should spin for a hundred or so microseconds | |
| * to ensure the SMI has triggered. | |
| * | |
| * Finally, the handler will return -ENOSYS if | |
| * GSMI_CMD_HANDSHAKE_TYPE is unimplemented, which implies | |
| * HANDSHAKE_NONE. | |
| */ | |
| spin_lock_irqsave(&gsmi_dev.lock, flags); | |
| gsmi_dev.handshake_type = GSMI_HANDSHAKE_SPIN; | |
| gsmi_dev.handshake_type = | |
| gsmi_exec(GSMI_CALLBACK, GSMI_CMD_HANDSHAKE_TYPE); | |
| if (gsmi_dev.handshake_type == -ENOSYS) | |
| gsmi_dev.handshake_type = GSMI_HANDSHAKE_NONE; | |
| spin_unlock_irqrestore(&gsmi_dev.lock, flags); | |
| /* Remove and clean up gsmi if the handshake could not complete. */ | |
| if (gsmi_dev.handshake_type == -ENXIO) { | |
| printk(KERN_INFO "gsmi version " DRIVER_VERSION | |
| " failed to load\n"); | |
| ret = -ENODEV; | |
| goto out_err; | |
| } | |
| /* Register in the firmware directory */ | |
| ret = -ENOMEM; | |
| gsmi_kobj = kobject_create_and_add("gsmi", firmware_kobj); | |
| if (!gsmi_kobj) { | |
| printk(KERN_INFO "gsmi: Failed to create firmware kobj\n"); | |
| goto out_err; | |
| } | |
| /* Setup eventlog access */ | |
| ret = sysfs_create_bin_file(gsmi_kobj, &eventlog_bin_attr); | |
| if (ret) { | |
| printk(KERN_INFO "gsmi: Failed to setup eventlog"); | |
| goto out_err; | |
| } | |
| /* Other attributes */ | |
| ret = sysfs_create_files(gsmi_kobj, gsmi_attrs); | |
| if (ret) { | |
| printk(KERN_INFO "gsmi: Failed to add attrs"); | |
| goto out_remove_bin_file; | |
| } | |
| ret = efivars_register(&efivars, &efivar_ops, gsmi_kobj); | |
| if (ret) { | |
| printk(KERN_INFO "gsmi: Failed to register efivars\n"); | |
| goto out_remove_sysfs_files; | |
| } | |
| register_reboot_notifier(&gsmi_reboot_notifier); | |
| register_die_notifier(&gsmi_die_notifier); | |
| atomic_notifier_chain_register(&panic_notifier_list, | |
| &gsmi_panic_notifier); | |
| printk(KERN_INFO "gsmi version " DRIVER_VERSION " loaded\n"); | |
| return 0; | |
| out_remove_sysfs_files: | |
| sysfs_remove_files(gsmi_kobj, gsmi_attrs); | |
| out_remove_bin_file: | |
| sysfs_remove_bin_file(gsmi_kobj, &eventlog_bin_attr); | |
| out_err: | |
| kobject_put(gsmi_kobj); | |
| gsmi_buf_free(gsmi_dev.param_buf); | |
| gsmi_buf_free(gsmi_dev.data_buf); | |
| gsmi_buf_free(gsmi_dev.name_buf); | |
| if (gsmi_dev.dma_pool) | |
| dma_pool_destroy(gsmi_dev.dma_pool); | |
| platform_device_unregister(gsmi_dev.pdev); | |
| pr_info("gsmi: failed to load: %d\n", ret); | |
| return ret; | |
| } | |
| static void __exit gsmi_exit(void) | |
| { | |
| unregister_reboot_notifier(&gsmi_reboot_notifier); | |
| unregister_die_notifier(&gsmi_die_notifier); | |
| atomic_notifier_chain_unregister(&panic_notifier_list, | |
| &gsmi_panic_notifier); | |
| efivars_unregister(&efivars); | |
| sysfs_remove_files(gsmi_kobj, gsmi_attrs); | |
| sysfs_remove_bin_file(gsmi_kobj, &eventlog_bin_attr); | |
| kobject_put(gsmi_kobj); | |
| gsmi_buf_free(gsmi_dev.param_buf); | |
| gsmi_buf_free(gsmi_dev.data_buf); | |
| gsmi_buf_free(gsmi_dev.name_buf); | |
| dma_pool_destroy(gsmi_dev.dma_pool); | |
| platform_device_unregister(gsmi_dev.pdev); | |
| } | |
| module_init(gsmi_init); | |
| module_exit(gsmi_exit); | |
| MODULE_AUTHOR("Google, Inc."); | |
| MODULE_LICENSE("GPL"); |