| /* | |
| * Copyright © 2014 Intel Corporation | |
| * | |
| * Permission is hereby granted, free of charge, to any person obtaining a | |
| * copy of this software and associated documentation files (the "Software"), | |
| * to deal in the Software without restriction, including without limitation | |
| * the rights to use, copy, modify, merge, publish, distribute, sublicense, | |
| * and/or sell copies of the Software, and to permit persons to whom the | |
| * Software is furnished to do so, subject to the following conditions: | |
| * | |
| * The above copyright notice and this permission notice (including the next | |
| * paragraph) shall be included in all copies or substantial portions of the | |
| * Software. | |
| * | |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR | |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, | |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL | |
| * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER | |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING | |
| * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER | |
| * DEALINGS IN THE SOFTWARE. | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/component.h> | |
| #include <drm/i915_component.h> | |
| #include "intel_drv.h" | |
| #include <drm/drmP.h> | |
| #include <drm/drm_edid.h> | |
| #include "i915_drv.h" | |
| /** | |
| * DOC: High Definition Audio over HDMI and Display Port | |
| * | |
| * The graphics and audio drivers together support High Definition Audio over | |
| * HDMI and Display Port. The audio programming sequences are divided into audio | |
| * codec and controller enable and disable sequences. The graphics driver | |
| * handles the audio codec sequences, while the audio driver handles the audio | |
| * controller sequences. | |
| * | |
| * The disable sequences must be performed before disabling the transcoder or | |
| * port. The enable sequences may only be performed after enabling the | |
| * transcoder and port, and after completed link training. Therefore the audio | |
| * enable/disable sequences are part of the modeset sequence. | |
| * | |
| * The codec and controller sequences could be done either parallel or serial, | |
| * but generally the ELDV/PD change in the codec sequence indicates to the audio | |
| * driver that the controller sequence should start. Indeed, most of the | |
| * co-operation between the graphics and audio drivers is handled via audio | |
| * related registers. (The notable exception is the power management, not | |
| * covered here.) | |
| * | |
| * The struct i915_audio_component is used to interact between the graphics | |
| * and audio drivers. The struct i915_audio_component_ops *ops in it is | |
| * defined in graphics driver and called in audio driver. The | |
| * struct i915_audio_component_audio_ops *audio_ops is called from i915 driver. | |
| */ | |
| static const struct { | |
| int clock; | |
| u32 config; | |
| } hdmi_audio_clock[] = { | |
| { 25175, AUD_CONFIG_PIXEL_CLOCK_HDMI_25175 }, | |
| { 25200, AUD_CONFIG_PIXEL_CLOCK_HDMI_25200 }, /* default per bspec */ | |
| { 27000, AUD_CONFIG_PIXEL_CLOCK_HDMI_27000 }, | |
| { 27027, AUD_CONFIG_PIXEL_CLOCK_HDMI_27027 }, | |
| { 54000, AUD_CONFIG_PIXEL_CLOCK_HDMI_54000 }, | |
| { 54054, AUD_CONFIG_PIXEL_CLOCK_HDMI_54054 }, | |
| { 74176, AUD_CONFIG_PIXEL_CLOCK_HDMI_74176 }, | |
| { 74250, AUD_CONFIG_PIXEL_CLOCK_HDMI_74250 }, | |
| { 148352, AUD_CONFIG_PIXEL_CLOCK_HDMI_148352 }, | |
| { 148500, AUD_CONFIG_PIXEL_CLOCK_HDMI_148500 }, | |
| }; | |
| /* HDMI N/CTS table */ | |
| #define TMDS_297M 297000 | |
| #define TMDS_296M 296703 | |
| static const struct { | |
| int sample_rate; | |
| int clock; | |
| int n; | |
| int cts; | |
| } aud_ncts[] = { | |
| { 44100, TMDS_296M, 4459, 234375 }, | |
| { 44100, TMDS_297M, 4704, 247500 }, | |
| { 48000, TMDS_296M, 5824, 281250 }, | |
| { 48000, TMDS_297M, 5120, 247500 }, | |
| { 32000, TMDS_296M, 5824, 421875 }, | |
| { 32000, TMDS_297M, 3072, 222750 }, | |
| { 88200, TMDS_296M, 8918, 234375 }, | |
| { 88200, TMDS_297M, 9408, 247500 }, | |
| { 96000, TMDS_296M, 11648, 281250 }, | |
| { 96000, TMDS_297M, 10240, 247500 }, | |
| { 176400, TMDS_296M, 17836, 234375 }, | |
| { 176400, TMDS_297M, 18816, 247500 }, | |
| { 192000, TMDS_296M, 23296, 281250 }, | |
| { 192000, TMDS_297M, 20480, 247500 }, | |
| }; | |
| /* get AUD_CONFIG_PIXEL_CLOCK_HDMI_* value for mode */ | |
| static u32 audio_config_hdmi_pixel_clock(const struct drm_display_mode *adjusted_mode) | |
| { | |
| int i; | |
| for (i = 0; i < ARRAY_SIZE(hdmi_audio_clock); i++) { | |
| if (adjusted_mode->crtc_clock == hdmi_audio_clock[i].clock) | |
| break; | |
| } | |
| if (i == ARRAY_SIZE(hdmi_audio_clock)) { | |
| DRM_DEBUG_KMS("HDMI audio pixel clock setting for %d not found, falling back to defaults\n", | |
| adjusted_mode->crtc_clock); | |
| i = 1; | |
| } | |
| DRM_DEBUG_KMS("Configuring HDMI audio for pixel clock %d (0x%08x)\n", | |
| hdmi_audio_clock[i].clock, | |
| hdmi_audio_clock[i].config); | |
| return hdmi_audio_clock[i].config; | |
| } | |
| static int audio_config_get_n(const struct drm_display_mode *mode, int rate) | |
| { | |
| int i; | |
| for (i = 0; i < ARRAY_SIZE(aud_ncts); i++) { | |
| if ((rate == aud_ncts[i].sample_rate) && | |
| (mode->clock == aud_ncts[i].clock)) { | |
| return aud_ncts[i].n; | |
| } | |
| } | |
| return 0; | |
| } | |
| static uint32_t audio_config_setup_n_reg(int n, uint32_t val) | |
| { | |
| int n_low, n_up; | |
| uint32_t tmp = val; | |
| n_low = n & 0xfff; | |
| n_up = (n >> 12) & 0xff; | |
| tmp &= ~(AUD_CONFIG_UPPER_N_MASK | AUD_CONFIG_LOWER_N_MASK); | |
| tmp |= ((n_up << AUD_CONFIG_UPPER_N_SHIFT) | | |
| (n_low << AUD_CONFIG_LOWER_N_SHIFT) | | |
| AUD_CONFIG_N_PROG_ENABLE); | |
| return tmp; | |
| } | |
| /* check whether N/CTS/M need be set manually */ | |
| static bool audio_rate_need_prog(struct intel_crtc *crtc, | |
| const struct drm_display_mode *mode) | |
| { | |
| if (((mode->clock == TMDS_297M) || | |
| (mode->clock == TMDS_296M)) && | |
| intel_pipe_has_type(crtc, INTEL_OUTPUT_HDMI)) | |
| return true; | |
| else | |
| return false; | |
| } | |
| static bool intel_eld_uptodate(struct drm_connector *connector, | |
| int reg_eldv, uint32_t bits_eldv, | |
| int reg_elda, uint32_t bits_elda, | |
| int reg_edid) | |
| { | |
| struct drm_i915_private *dev_priv = connector->dev->dev_private; | |
| uint8_t *eld = connector->eld; | |
| uint32_t tmp; | |
| int i; | |
| tmp = I915_READ(reg_eldv); | |
| tmp &= bits_eldv; | |
| if (!tmp) | |
| return false; | |
| tmp = I915_READ(reg_elda); | |
| tmp &= ~bits_elda; | |
| I915_WRITE(reg_elda, tmp); | |
| for (i = 0; i < drm_eld_size(eld) / 4; i++) | |
| if (I915_READ(reg_edid) != *((uint32_t *)eld + i)) | |
| return false; | |
| return true; | |
| } | |
| static void g4x_audio_codec_disable(struct intel_encoder *encoder) | |
| { | |
| struct drm_i915_private *dev_priv = encoder->base.dev->dev_private; | |
| uint32_t eldv, tmp; | |
| DRM_DEBUG_KMS("Disable audio codec\n"); | |
| tmp = I915_READ(G4X_AUD_VID_DID); | |
| if (tmp == INTEL_AUDIO_DEVBLC || tmp == INTEL_AUDIO_DEVCL) | |
| eldv = G4X_ELDV_DEVCL_DEVBLC; | |
| else | |
| eldv = G4X_ELDV_DEVCTG; | |
| /* Invalidate ELD */ | |
| tmp = I915_READ(G4X_AUD_CNTL_ST); | |
| tmp &= ~eldv; | |
| I915_WRITE(G4X_AUD_CNTL_ST, tmp); | |
| } | |
| static void g4x_audio_codec_enable(struct drm_connector *connector, | |
| struct intel_encoder *encoder, | |
| const struct drm_display_mode *adjusted_mode) | |
| { | |
| struct drm_i915_private *dev_priv = connector->dev->dev_private; | |
| uint8_t *eld = connector->eld; | |
| uint32_t eldv; | |
| uint32_t tmp; | |
| int len, i; | |
| DRM_DEBUG_KMS("Enable audio codec, %u bytes ELD\n", eld[2]); | |
| tmp = I915_READ(G4X_AUD_VID_DID); | |
| if (tmp == INTEL_AUDIO_DEVBLC || tmp == INTEL_AUDIO_DEVCL) | |
| eldv = G4X_ELDV_DEVCL_DEVBLC; | |
| else | |
| eldv = G4X_ELDV_DEVCTG; | |
| if (intel_eld_uptodate(connector, | |
| G4X_AUD_CNTL_ST, eldv, | |
| G4X_AUD_CNTL_ST, G4X_ELD_ADDR_MASK, | |
| G4X_HDMIW_HDMIEDID)) | |
| return; | |
| tmp = I915_READ(G4X_AUD_CNTL_ST); | |
| tmp &= ~(eldv | G4X_ELD_ADDR_MASK); | |
| len = (tmp >> 9) & 0x1f; /* ELD buffer size */ | |
| I915_WRITE(G4X_AUD_CNTL_ST, tmp); | |
| len = min(drm_eld_size(eld) / 4, len); | |
| DRM_DEBUG_DRIVER("ELD size %d\n", len); | |
| for (i = 0; i < len; i++) | |
| I915_WRITE(G4X_HDMIW_HDMIEDID, *((uint32_t *)eld + i)); | |
| tmp = I915_READ(G4X_AUD_CNTL_ST); | |
| tmp |= eldv; | |
| I915_WRITE(G4X_AUD_CNTL_ST, tmp); | |
| } | |
| static void hsw_audio_codec_disable(struct intel_encoder *encoder) | |
| { | |
| struct drm_i915_private *dev_priv = encoder->base.dev->dev_private; | |
| struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc); | |
| enum pipe pipe = intel_crtc->pipe; | |
| uint32_t tmp; | |
| DRM_DEBUG_KMS("Disable audio codec on pipe %c\n", pipe_name(pipe)); | |
| mutex_lock(&dev_priv->av_mutex); | |
| /* Disable timestamps */ | |
| tmp = I915_READ(HSW_AUD_CFG(pipe)); | |
| tmp &= ~AUD_CONFIG_N_VALUE_INDEX; | |
| tmp |= AUD_CONFIG_N_PROG_ENABLE; | |
| tmp &= ~AUD_CONFIG_UPPER_N_MASK; | |
| tmp &= ~AUD_CONFIG_LOWER_N_MASK; | |
| if (intel_pipe_has_type(intel_crtc, INTEL_OUTPUT_DISPLAYPORT)) | |
| tmp |= AUD_CONFIG_N_VALUE_INDEX; | |
| I915_WRITE(HSW_AUD_CFG(pipe), tmp); | |
| /* Invalidate ELD */ | |
| tmp = I915_READ(HSW_AUD_PIN_ELD_CP_VLD); | |
| tmp &= ~AUDIO_ELD_VALID(pipe); | |
| tmp &= ~AUDIO_OUTPUT_ENABLE(pipe); | |
| I915_WRITE(HSW_AUD_PIN_ELD_CP_VLD, tmp); | |
| mutex_unlock(&dev_priv->av_mutex); | |
| } | |
| static void hsw_audio_codec_enable(struct drm_connector *connector, | |
| struct intel_encoder *encoder, | |
| const struct drm_display_mode *adjusted_mode) | |
| { | |
| struct drm_i915_private *dev_priv = connector->dev->dev_private; | |
| struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc); | |
| enum pipe pipe = intel_crtc->pipe; | |
| struct i915_audio_component *acomp = dev_priv->audio_component; | |
| const uint8_t *eld = connector->eld; | |
| struct intel_digital_port *intel_dig_port = | |
| enc_to_dig_port(&encoder->base); | |
| enum port port = intel_dig_port->port; | |
| uint32_t tmp; | |
| int len, i; | |
| int n, rate; | |
| DRM_DEBUG_KMS("Enable audio codec on pipe %c, %u bytes ELD\n", | |
| pipe_name(pipe), drm_eld_size(eld)); | |
| mutex_lock(&dev_priv->av_mutex); | |
| /* Enable audio presence detect, invalidate ELD */ | |
| tmp = I915_READ(HSW_AUD_PIN_ELD_CP_VLD); | |
| tmp |= AUDIO_OUTPUT_ENABLE(pipe); | |
| tmp &= ~AUDIO_ELD_VALID(pipe); | |
| I915_WRITE(HSW_AUD_PIN_ELD_CP_VLD, tmp); | |
| /* | |
| * FIXME: We're supposed to wait for vblank here, but we have vblanks | |
| * disabled during the mode set. The proper fix would be to push the | |
| * rest of the setup into a vblank work item, queued here, but the | |
| * infrastructure is not there yet. | |
| */ | |
| /* Reset ELD write address */ | |
| tmp = I915_READ(HSW_AUD_DIP_ELD_CTRL(pipe)); | |
| tmp &= ~IBX_ELD_ADDRESS_MASK; | |
| I915_WRITE(HSW_AUD_DIP_ELD_CTRL(pipe), tmp); | |
| /* Up to 84 bytes of hw ELD buffer */ | |
| len = min(drm_eld_size(eld), 84); | |
| for (i = 0; i < len / 4; i++) | |
| I915_WRITE(HSW_AUD_EDID_DATA(pipe), *((uint32_t *)eld + i)); | |
| /* ELD valid */ | |
| tmp = I915_READ(HSW_AUD_PIN_ELD_CP_VLD); | |
| tmp |= AUDIO_ELD_VALID(pipe); | |
| I915_WRITE(HSW_AUD_PIN_ELD_CP_VLD, tmp); | |
| /* Enable timestamps */ | |
| tmp = I915_READ(HSW_AUD_CFG(pipe)); | |
| tmp &= ~AUD_CONFIG_N_VALUE_INDEX; | |
| tmp &= ~AUD_CONFIG_PIXEL_CLOCK_HDMI_MASK; | |
| if (intel_pipe_has_type(intel_crtc, INTEL_OUTPUT_DISPLAYPORT)) | |
| tmp |= AUD_CONFIG_N_VALUE_INDEX; | |
| else | |
| tmp |= audio_config_hdmi_pixel_clock(adjusted_mode); | |
| tmp &= ~AUD_CONFIG_N_PROG_ENABLE; | |
| if (audio_rate_need_prog(intel_crtc, adjusted_mode)) { | |
| if (!acomp) | |
| rate = 0; | |
| else if (port >= PORT_A && port <= PORT_E) | |
| rate = acomp->aud_sample_rate[port]; | |
| else { | |
| DRM_ERROR("invalid port: %d\n", port); | |
| rate = 0; | |
| } | |
| n = audio_config_get_n(adjusted_mode, rate); | |
| if (n != 0) | |
| tmp = audio_config_setup_n_reg(n, tmp); | |
| else | |
| DRM_DEBUG_KMS("no suitable N value is found\n"); | |
| } | |
| I915_WRITE(HSW_AUD_CFG(pipe), tmp); | |
| mutex_unlock(&dev_priv->av_mutex); | |
| } | |
| static void ilk_audio_codec_disable(struct intel_encoder *encoder) | |
| { | |
| struct drm_i915_private *dev_priv = encoder->base.dev->dev_private; | |
| struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc); | |
| struct intel_digital_port *intel_dig_port = | |
| enc_to_dig_port(&encoder->base); | |
| enum port port = intel_dig_port->port; | |
| enum pipe pipe = intel_crtc->pipe; | |
| uint32_t tmp, eldv; | |
| int aud_config; | |
| int aud_cntrl_st2; | |
| DRM_DEBUG_KMS("Disable audio codec on port %c, pipe %c\n", | |
| port_name(port), pipe_name(pipe)); | |
| if (WARN_ON(port == PORT_A)) | |
| return; | |
| if (HAS_PCH_IBX(dev_priv->dev)) { | |
| aud_config = IBX_AUD_CFG(pipe); | |
| aud_cntrl_st2 = IBX_AUD_CNTL_ST2; | |
| } else if (IS_VALLEYVIEW(dev_priv)) { | |
| aud_config = VLV_AUD_CFG(pipe); | |
| aud_cntrl_st2 = VLV_AUD_CNTL_ST2; | |
| } else { | |
| aud_config = CPT_AUD_CFG(pipe); | |
| aud_cntrl_st2 = CPT_AUD_CNTRL_ST2; | |
| } | |
| /* Disable timestamps */ | |
| tmp = I915_READ(aud_config); | |
| tmp &= ~AUD_CONFIG_N_VALUE_INDEX; | |
| tmp |= AUD_CONFIG_N_PROG_ENABLE; | |
| tmp &= ~AUD_CONFIG_UPPER_N_MASK; | |
| tmp &= ~AUD_CONFIG_LOWER_N_MASK; | |
| if (intel_pipe_has_type(intel_crtc, INTEL_OUTPUT_DISPLAYPORT)) | |
| tmp |= AUD_CONFIG_N_VALUE_INDEX; | |
| I915_WRITE(aud_config, tmp); | |
| eldv = IBX_ELD_VALID(port); | |
| /* Invalidate ELD */ | |
| tmp = I915_READ(aud_cntrl_st2); | |
| tmp &= ~eldv; | |
| I915_WRITE(aud_cntrl_st2, tmp); | |
| } | |
| static void ilk_audio_codec_enable(struct drm_connector *connector, | |
| struct intel_encoder *encoder, | |
| const struct drm_display_mode *adjusted_mode) | |
| { | |
| struct drm_i915_private *dev_priv = connector->dev->dev_private; | |
| struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc); | |
| struct intel_digital_port *intel_dig_port = | |
| enc_to_dig_port(&encoder->base); | |
| enum port port = intel_dig_port->port; | |
| enum pipe pipe = intel_crtc->pipe; | |
| uint8_t *eld = connector->eld; | |
| uint32_t eldv; | |
| uint32_t tmp; | |
| int len, i; | |
| int hdmiw_hdmiedid; | |
| int aud_config; | |
| int aud_cntl_st; | |
| int aud_cntrl_st2; | |
| DRM_DEBUG_KMS("Enable audio codec on port %c, pipe %c, %u bytes ELD\n", | |
| port_name(port), pipe_name(pipe), drm_eld_size(eld)); | |
| if (WARN_ON(port == PORT_A)) | |
| return; | |
| /* | |
| * FIXME: We're supposed to wait for vblank here, but we have vblanks | |
| * disabled during the mode set. The proper fix would be to push the | |
| * rest of the setup into a vblank work item, queued here, but the | |
| * infrastructure is not there yet. | |
| */ | |
| if (HAS_PCH_IBX(connector->dev)) { | |
| hdmiw_hdmiedid = IBX_HDMIW_HDMIEDID(pipe); | |
| aud_config = IBX_AUD_CFG(pipe); | |
| aud_cntl_st = IBX_AUD_CNTL_ST(pipe); | |
| aud_cntrl_st2 = IBX_AUD_CNTL_ST2; | |
| } else if (IS_VALLEYVIEW(connector->dev)) { | |
| hdmiw_hdmiedid = VLV_HDMIW_HDMIEDID(pipe); | |
| aud_config = VLV_AUD_CFG(pipe); | |
| aud_cntl_st = VLV_AUD_CNTL_ST(pipe); | |
| aud_cntrl_st2 = VLV_AUD_CNTL_ST2; | |
| } else { | |
| hdmiw_hdmiedid = CPT_HDMIW_HDMIEDID(pipe); | |
| aud_config = CPT_AUD_CFG(pipe); | |
| aud_cntl_st = CPT_AUD_CNTL_ST(pipe); | |
| aud_cntrl_st2 = CPT_AUD_CNTRL_ST2; | |
| } | |
| eldv = IBX_ELD_VALID(port); | |
| /* Invalidate ELD */ | |
| tmp = I915_READ(aud_cntrl_st2); | |
| tmp &= ~eldv; | |
| I915_WRITE(aud_cntrl_st2, tmp); | |
| /* Reset ELD write address */ | |
| tmp = I915_READ(aud_cntl_st); | |
| tmp &= ~IBX_ELD_ADDRESS_MASK; | |
| I915_WRITE(aud_cntl_st, tmp); | |
| /* Up to 84 bytes of hw ELD buffer */ | |
| len = min(drm_eld_size(eld), 84); | |
| for (i = 0; i < len / 4; i++) | |
| I915_WRITE(hdmiw_hdmiedid, *((uint32_t *)eld + i)); | |
| /* ELD valid */ | |
| tmp = I915_READ(aud_cntrl_st2); | |
| tmp |= eldv; | |
| I915_WRITE(aud_cntrl_st2, tmp); | |
| /* Enable timestamps */ | |
| tmp = I915_READ(aud_config); | |
| tmp &= ~AUD_CONFIG_N_VALUE_INDEX; | |
| tmp &= ~AUD_CONFIG_N_PROG_ENABLE; | |
| tmp &= ~AUD_CONFIG_PIXEL_CLOCK_HDMI_MASK; | |
| if (intel_pipe_has_type(intel_crtc, INTEL_OUTPUT_DISPLAYPORT)) | |
| tmp |= AUD_CONFIG_N_VALUE_INDEX; | |
| else | |
| tmp |= audio_config_hdmi_pixel_clock(adjusted_mode); | |
| I915_WRITE(aud_config, tmp); | |
| } | |
| /** | |
| * intel_audio_codec_enable - Enable the audio codec for HD audio | |
| * @intel_encoder: encoder on which to enable audio | |
| * | |
| * The enable sequences may only be performed after enabling the transcoder and | |
| * port, and after completed link training. | |
| */ | |
| void intel_audio_codec_enable(struct intel_encoder *intel_encoder) | |
| { | |
| struct drm_encoder *encoder = &intel_encoder->base; | |
| struct intel_crtc *crtc = to_intel_crtc(encoder->crtc); | |
| const struct drm_display_mode *adjusted_mode = &crtc->config->base.adjusted_mode; | |
| struct drm_connector *connector; | |
| struct drm_device *dev = encoder->dev; | |
| struct drm_i915_private *dev_priv = dev->dev_private; | |
| struct i915_audio_component *acomp = dev_priv->audio_component; | |
| struct intel_digital_port *intel_dig_port = enc_to_dig_port(encoder); | |
| enum port port = intel_dig_port->port; | |
| connector = drm_select_eld(encoder); | |
| if (!connector) | |
| return; | |
| DRM_DEBUG_DRIVER("ELD on [CONNECTOR:%d:%s], [ENCODER:%d:%s]\n", | |
| connector->base.id, | |
| connector->name, | |
| connector->encoder->base.id, | |
| connector->encoder->name); | |
| /* ELD Conn_Type */ | |
| connector->eld[5] &= ~(3 << 2); | |
| if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT)) | |
| connector->eld[5] |= (1 << 2); | |
| connector->eld[6] = drm_av_sync_delay(connector, adjusted_mode) / 2; | |
| if (dev_priv->display.audio_codec_enable) | |
| dev_priv->display.audio_codec_enable(connector, intel_encoder, | |
| adjusted_mode); | |
| if (acomp && acomp->audio_ops && acomp->audio_ops->pin_eld_notify) | |
| acomp->audio_ops->pin_eld_notify(acomp->audio_ops->audio_ptr, (int) port); | |
| } | |
| /** | |
| * intel_audio_codec_disable - Disable the audio codec for HD audio | |
| * @intel_encoder: encoder on which to disable audio | |
| * | |
| * The disable sequences must be performed before disabling the transcoder or | |
| * port. | |
| */ | |
| void intel_audio_codec_disable(struct intel_encoder *intel_encoder) | |
| { | |
| struct drm_encoder *encoder = &intel_encoder->base; | |
| struct drm_device *dev = encoder->dev; | |
| struct drm_i915_private *dev_priv = dev->dev_private; | |
| struct i915_audio_component *acomp = dev_priv->audio_component; | |
| struct intel_digital_port *intel_dig_port = enc_to_dig_port(encoder); | |
| enum port port = intel_dig_port->port; | |
| if (dev_priv->display.audio_codec_disable) | |
| dev_priv->display.audio_codec_disable(intel_encoder); | |
| if (acomp && acomp->audio_ops && acomp->audio_ops->pin_eld_notify) | |
| acomp->audio_ops->pin_eld_notify(acomp->audio_ops->audio_ptr, (int) port); | |
| } | |
| /** | |
| * intel_init_audio - Set up chip specific audio functions | |
| * @dev: drm device | |
| */ | |
| void intel_init_audio(struct drm_device *dev) | |
| { | |
| struct drm_i915_private *dev_priv = dev->dev_private; | |
| if (IS_G4X(dev)) { | |
| dev_priv->display.audio_codec_enable = g4x_audio_codec_enable; | |
| dev_priv->display.audio_codec_disable = g4x_audio_codec_disable; | |
| } else if (IS_VALLEYVIEW(dev)) { | |
| dev_priv->display.audio_codec_enable = ilk_audio_codec_enable; | |
| dev_priv->display.audio_codec_disable = ilk_audio_codec_disable; | |
| } else if (IS_HASWELL(dev) || INTEL_INFO(dev)->gen >= 8) { | |
| dev_priv->display.audio_codec_enable = hsw_audio_codec_enable; | |
| dev_priv->display.audio_codec_disable = hsw_audio_codec_disable; | |
| } else if (HAS_PCH_SPLIT(dev)) { | |
| dev_priv->display.audio_codec_enable = ilk_audio_codec_enable; | |
| dev_priv->display.audio_codec_disable = ilk_audio_codec_disable; | |
| } | |
| } | |
| static void i915_audio_component_get_power(struct device *dev) | |
| { | |
| intel_display_power_get(dev_to_i915(dev), POWER_DOMAIN_AUDIO); | |
| } | |
| static void i915_audio_component_put_power(struct device *dev) | |
| { | |
| intel_display_power_put(dev_to_i915(dev), POWER_DOMAIN_AUDIO); | |
| } | |
| static void i915_audio_component_codec_wake_override(struct device *dev, | |
| bool enable) | |
| { | |
| struct drm_i915_private *dev_priv = dev_to_i915(dev); | |
| u32 tmp; | |
| if (!IS_SKYLAKE(dev_priv)) | |
| return; | |
| /* | |
| * Enable/disable generating the codec wake signal, overriding the | |
| * internal logic to generate the codec wake to controller. | |
| */ | |
| tmp = I915_READ(HSW_AUD_CHICKENBIT); | |
| tmp &= ~SKL_AUD_CODEC_WAKE_SIGNAL; | |
| I915_WRITE(HSW_AUD_CHICKENBIT, tmp); | |
| usleep_range(1000, 1500); | |
| if (enable) { | |
| tmp = I915_READ(HSW_AUD_CHICKENBIT); | |
| tmp |= SKL_AUD_CODEC_WAKE_SIGNAL; | |
| I915_WRITE(HSW_AUD_CHICKENBIT, tmp); | |
| usleep_range(1000, 1500); | |
| } | |
| } | |
| /* Get CDCLK in kHz */ | |
| static int i915_audio_component_get_cdclk_freq(struct device *dev) | |
| { | |
| struct drm_i915_private *dev_priv = dev_to_i915(dev); | |
| int ret; | |
| if (WARN_ON_ONCE(!HAS_DDI(dev_priv))) | |
| return -ENODEV; | |
| intel_display_power_get(dev_priv, POWER_DOMAIN_AUDIO); | |
| ret = dev_priv->display.get_display_clock_speed(dev_priv->dev); | |
| intel_display_power_put(dev_priv, POWER_DOMAIN_AUDIO); | |
| return ret; | |
| } | |
| static int i915_audio_component_sync_audio_rate(struct device *dev, | |
| int port, int rate) | |
| { | |
| struct drm_i915_private *dev_priv = dev_to_i915(dev); | |
| struct drm_device *drm_dev = dev_priv->dev; | |
| struct intel_encoder *intel_encoder; | |
| struct intel_digital_port *intel_dig_port; | |
| struct intel_crtc *crtc; | |
| struct drm_display_mode *mode; | |
| struct i915_audio_component *acomp = dev_priv->audio_component; | |
| enum pipe pipe = -1; | |
| u32 tmp; | |
| int n; | |
| /* HSW, BDW SKL need this fix */ | |
| if (!IS_SKYLAKE(dev_priv) && | |
| !IS_BROADWELL(dev_priv) && | |
| !IS_HASWELL(dev_priv)) | |
| return 0; | |
| mutex_lock(&dev_priv->av_mutex); | |
| /* 1. get the pipe */ | |
| for_each_intel_encoder(drm_dev, intel_encoder) { | |
| if (intel_encoder->type != INTEL_OUTPUT_HDMI) | |
| continue; | |
| intel_dig_port = enc_to_dig_port(&intel_encoder->base); | |
| if (port == intel_dig_port->port) { | |
| crtc = to_intel_crtc(intel_encoder->base.crtc); | |
| if (!crtc) { | |
| DRM_DEBUG_KMS("%s: crtc is NULL\n", __func__); | |
| continue; | |
| } | |
| pipe = crtc->pipe; | |
| break; | |
| } | |
| } | |
| if (pipe == INVALID_PIPE) { | |
| DRM_DEBUG_KMS("no pipe for the port %c\n", port_name(port)); | |
| mutex_unlock(&dev_priv->av_mutex); | |
| return -ENODEV; | |
| } | |
| DRM_DEBUG_KMS("pipe %c connects port %c\n", | |
| pipe_name(pipe), port_name(port)); | |
| mode = &crtc->config->base.adjusted_mode; | |
| /* port must be valid now, otherwise the pipe will be invalid */ | |
| acomp->aud_sample_rate[port] = rate; | |
| /* 2. check whether to set the N/CTS/M manually or not */ | |
| if (!audio_rate_need_prog(crtc, mode)) { | |
| tmp = I915_READ(HSW_AUD_CFG(pipe)); | |
| tmp &= ~AUD_CONFIG_N_PROG_ENABLE; | |
| I915_WRITE(HSW_AUD_CFG(pipe), tmp); | |
| mutex_unlock(&dev_priv->av_mutex); | |
| return 0; | |
| } | |
| n = audio_config_get_n(mode, rate); | |
| if (n == 0) { | |
| DRM_DEBUG_KMS("Using automatic mode for N value on port %c\n", | |
| port_name(port)); | |
| tmp = I915_READ(HSW_AUD_CFG(pipe)); | |
| tmp &= ~AUD_CONFIG_N_PROG_ENABLE; | |
| I915_WRITE(HSW_AUD_CFG(pipe), tmp); | |
| mutex_unlock(&dev_priv->av_mutex); | |
| return 0; | |
| } | |
| /* 3. set the N/CTS/M */ | |
| tmp = I915_READ(HSW_AUD_CFG(pipe)); | |
| tmp = audio_config_setup_n_reg(n, tmp); | |
| I915_WRITE(HSW_AUD_CFG(pipe), tmp); | |
| mutex_unlock(&dev_priv->av_mutex); | |
| return 0; | |
| } | |
| static const struct i915_audio_component_ops i915_audio_component_ops = { | |
| .owner = THIS_MODULE, | |
| .get_power = i915_audio_component_get_power, | |
| .put_power = i915_audio_component_put_power, | |
| .codec_wake_override = i915_audio_component_codec_wake_override, | |
| .get_cdclk_freq = i915_audio_component_get_cdclk_freq, | |
| .sync_audio_rate = i915_audio_component_sync_audio_rate, | |
| }; | |
| static int i915_audio_component_bind(struct device *i915_dev, | |
| struct device *hda_dev, void *data) | |
| { | |
| struct i915_audio_component *acomp = data; | |
| struct drm_i915_private *dev_priv = dev_to_i915(i915_dev); | |
| int i; | |
| if (WARN_ON(acomp->ops || acomp->dev)) | |
| return -EEXIST; | |
| drm_modeset_lock_all(dev_priv->dev); | |
| acomp->ops = &i915_audio_component_ops; | |
| acomp->dev = i915_dev; | |
| BUILD_BUG_ON(MAX_PORTS != I915_MAX_PORTS); | |
| for (i = 0; i < ARRAY_SIZE(acomp->aud_sample_rate); i++) | |
| acomp->aud_sample_rate[i] = 0; | |
| dev_priv->audio_component = acomp; | |
| drm_modeset_unlock_all(dev_priv->dev); | |
| return 0; | |
| } | |
| static void i915_audio_component_unbind(struct device *i915_dev, | |
| struct device *hda_dev, void *data) | |
| { | |
| struct i915_audio_component *acomp = data; | |
| struct drm_i915_private *dev_priv = dev_to_i915(i915_dev); | |
| drm_modeset_lock_all(dev_priv->dev); | |
| acomp->ops = NULL; | |
| acomp->dev = NULL; | |
| dev_priv->audio_component = NULL; | |
| drm_modeset_unlock_all(dev_priv->dev); | |
| } | |
| static const struct component_ops i915_audio_component_bind_ops = { | |
| .bind = i915_audio_component_bind, | |
| .unbind = i915_audio_component_unbind, | |
| }; | |
| /** | |
| * i915_audio_component_init - initialize and register the audio component | |
| * @dev_priv: i915 device instance | |
| * | |
| * This will register with the component framework a child component which | |
| * will bind dynamically to the snd_hda_intel driver's corresponding master | |
| * component when the latter is registered. During binding the child | |
| * initializes an instance of struct i915_audio_component which it receives | |
| * from the master. The master can then start to use the interface defined by | |
| * this struct. Each side can break the binding at any point by deregistering | |
| * its own component after which each side's component unbind callback is | |
| * called. | |
| * | |
| * We ignore any error during registration and continue with reduced | |
| * functionality (i.e. without HDMI audio). | |
| */ | |
| void i915_audio_component_init(struct drm_i915_private *dev_priv) | |
| { | |
| int ret; | |
| ret = component_add(dev_priv->dev->dev, &i915_audio_component_bind_ops); | |
| if (ret < 0) { | |
| DRM_ERROR("failed to add audio component (%d)\n", ret); | |
| /* continue with reduced functionality */ | |
| return; | |
| } | |
| dev_priv->audio_component_registered = true; | |
| } | |
| /** | |
| * i915_audio_component_cleanup - deregister the audio component | |
| * @dev_priv: i915 device instance | |
| * | |
| * Deregisters the audio component, breaking any existing binding to the | |
| * corresponding snd_hda_intel driver's master component. | |
| */ | |
| void i915_audio_component_cleanup(struct drm_i915_private *dev_priv) | |
| { | |
| if (!dev_priv->audio_component_registered) | |
| return; | |
| component_del(dev_priv->dev->dev, &i915_audio_component_bind_ops); | |
| dev_priv->audio_component_registered = false; | |
| } |