| /* | |
| * Copyright © 2014 Intel Corporation | |
| * | |
| * Permission is hereby granted, free of charge, to any person obtaining a | |
| * copy of this software and associated documentation files (the "Software"), | |
| * to deal in the Software without restriction, including without limitation | |
| * the rights to use, copy, modify, merge, publish, distribute, sublicense, | |
| * and/or sell copies of the Software, and to permit persons to whom the | |
| * Software is furnished to do so, subject to the following conditions: | |
| * | |
| * The above copyright notice and this permission notice (including the next | |
| * paragraph) shall be included in all copies or substantial portions of the | |
| * Software. | |
| * | |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR | |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, | |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL | |
| * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER | |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING | |
| * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS | |
| * IN THE SOFTWARE. | |
| * | |
| */ | |
| #include <linux/firmware.h> | |
| #include "i915_drv.h" | |
| #include "i915_reg.h" | |
| /** | |
| * DOC: csr support for dmc | |
| * | |
| * Display Context Save and Restore (CSR) firmware support added from gen9 | |
| * onwards to drive newly added DMC (Display microcontroller) in display | |
| * engine to save and restore the state of display engine when it enter into | |
| * low-power state and comes back to normal. | |
| * | |
| * Firmware loading status will be one of the below states: FW_UNINITIALIZED, | |
| * FW_LOADED, FW_FAILED. | |
| * | |
| * Once the firmware is written into the registers status will be moved from | |
| * FW_UNINITIALIZED to FW_LOADED and for any erroneous condition status will | |
| * be moved to FW_FAILED. | |
| */ | |
| #define I915_CSR_SKL "i915/skl_dmc_ver1.bin" | |
| #define I915_CSR_BXT "i915/bxt_dmc_ver1.bin" | |
| MODULE_FIRMWARE(I915_CSR_SKL); | |
| MODULE_FIRMWARE(I915_CSR_BXT); | |
| /* | |
| * SKL CSR registers for DC5 and DC6 | |
| */ | |
| #define CSR_PROGRAM(i) (0x80000 + (i) * 4) | |
| #define CSR_SSP_BASE_ADDR_GEN9 0x00002FC0 | |
| #define CSR_HTP_ADDR_SKL 0x00500034 | |
| #define CSR_SSP_BASE 0x8F074 | |
| #define CSR_HTP_SKL 0x8F004 | |
| #define CSR_LAST_WRITE 0x8F034 | |
| #define CSR_LAST_WRITE_VALUE 0xc003b400 | |
| /* MMIO address range for CSR program (0x80000 - 0x82FFF) */ | |
| #define CSR_MAX_FW_SIZE 0x2FFF | |
| #define CSR_DEFAULT_FW_OFFSET 0xFFFFFFFF | |
| #define CSR_MMIO_START_RANGE 0x80000 | |
| #define CSR_MMIO_END_RANGE 0x8FFFF | |
| struct intel_css_header { | |
| /* 0x09 for DMC */ | |
| uint32_t module_type; | |
| /* Includes the DMC specific header in dwords */ | |
| uint32_t header_len; | |
| /* always value would be 0x10000 */ | |
| uint32_t header_ver; | |
| /* Not used */ | |
| uint32_t module_id; | |
| /* Not used */ | |
| uint32_t module_vendor; | |
| /* in YYYYMMDD format */ | |
| uint32_t date; | |
| /* Size in dwords (CSS_Headerlen + PackageHeaderLen + dmc FWsLen)/4 */ | |
| uint32_t size; | |
| /* Not used */ | |
| uint32_t key_size; | |
| /* Not used */ | |
| uint32_t modulus_size; | |
| /* Not used */ | |
| uint32_t exponent_size; | |
| /* Not used */ | |
| uint32_t reserved1[12]; | |
| /* Major Minor */ | |
| uint32_t version; | |
| /* Not used */ | |
| uint32_t reserved2[8]; | |
| /* Not used */ | |
| uint32_t kernel_header_info; | |
| } __packed; | |
| struct intel_fw_info { | |
| uint16_t reserved1; | |
| /* Stepping (A, B, C, ..., *). * is a wildcard */ | |
| char stepping; | |
| /* Sub-stepping (0, 1, ..., *). * is a wildcard */ | |
| char substepping; | |
| uint32_t offset; | |
| uint32_t reserved2; | |
| } __packed; | |
| struct intel_package_header { | |
| /* DMC container header length in dwords */ | |
| unsigned char header_len; | |
| /* always value would be 0x01 */ | |
| unsigned char header_ver; | |
| unsigned char reserved[10]; | |
| /* Number of valid entries in the FWInfo array below */ | |
| uint32_t num_entries; | |
| struct intel_fw_info fw_info[20]; | |
| } __packed; | |
| struct intel_dmc_header { | |
| /* always value would be 0x40403E3E */ | |
| uint32_t signature; | |
| /* DMC binary header length */ | |
| unsigned char header_len; | |
| /* 0x01 */ | |
| unsigned char header_ver; | |
| /* Reserved */ | |
| uint16_t dmcc_ver; | |
| /* Major, Minor */ | |
| uint32_t project; | |
| /* Firmware program size (excluding header) in dwords */ | |
| uint32_t fw_size; | |
| /* Major Minor version */ | |
| uint32_t fw_version; | |
| /* Number of valid MMIO cycles present. */ | |
| uint32_t mmio_count; | |
| /* MMIO address */ | |
| uint32_t mmioaddr[8]; | |
| /* MMIO data */ | |
| uint32_t mmiodata[8]; | |
| /* FW filename */ | |
| unsigned char dfile[32]; | |
| uint32_t reserved1[2]; | |
| } __packed; | |
| struct stepping_info { | |
| char stepping; | |
| char substepping; | |
| }; | |
| static const struct stepping_info skl_stepping_info[] = { | |
| {'A', '0'}, {'B', '0'}, {'C', '0'}, | |
| {'D', '0'}, {'E', '0'}, {'F', '0'}, | |
| {'G', '0'}, {'H', '0'}, {'I', '0'} | |
| }; | |
| static struct stepping_info bxt_stepping_info[] = { | |
| {'A', '0'}, {'A', '1'}, {'A', '2'}, | |
| {'B', '0'}, {'B', '1'}, {'B', '2'} | |
| }; | |
| static char intel_get_stepping(struct drm_device *dev) | |
| { | |
| if (IS_SKYLAKE(dev) && (dev->pdev->revision < | |
| ARRAY_SIZE(skl_stepping_info))) | |
| return skl_stepping_info[dev->pdev->revision].stepping; | |
| else if (IS_BROXTON(dev) && (dev->pdev->revision < | |
| ARRAY_SIZE(bxt_stepping_info))) | |
| return bxt_stepping_info[dev->pdev->revision].stepping; | |
| else | |
| return -ENODATA; | |
| } | |
| static char intel_get_substepping(struct drm_device *dev) | |
| { | |
| if (IS_SKYLAKE(dev) && (dev->pdev->revision < | |
| ARRAY_SIZE(skl_stepping_info))) | |
| return skl_stepping_info[dev->pdev->revision].substepping; | |
| else if (IS_BROXTON(dev) && (dev->pdev->revision < | |
| ARRAY_SIZE(bxt_stepping_info))) | |
| return bxt_stepping_info[dev->pdev->revision].substepping; | |
| else | |
| return -ENODATA; | |
| } | |
| /** | |
| * intel_csr_load_status_get() - to get firmware loading status. | |
| * @dev_priv: i915 device. | |
| * | |
| * This function helps to get the firmware loading status. | |
| * | |
| * Return: Firmware loading status. | |
| */ | |
| enum csr_state intel_csr_load_status_get(struct drm_i915_private *dev_priv) | |
| { | |
| enum csr_state state; | |
| mutex_lock(&dev_priv->csr_lock); | |
| state = dev_priv->csr.state; | |
| mutex_unlock(&dev_priv->csr_lock); | |
| return state; | |
| } | |
| /** | |
| * intel_csr_load_status_set() - help to set firmware loading status. | |
| * @dev_priv: i915 device. | |
| * @state: enumeration of firmware loading status. | |
| * | |
| * Set the firmware loading status. | |
| */ | |
| void intel_csr_load_status_set(struct drm_i915_private *dev_priv, | |
| enum csr_state state) | |
| { | |
| mutex_lock(&dev_priv->csr_lock); | |
| dev_priv->csr.state = state; | |
| mutex_unlock(&dev_priv->csr_lock); | |
| } | |
| /** | |
| * intel_csr_load_program() - write the firmware from memory to register. | |
| * @dev: drm device. | |
| * | |
| * CSR firmware is read from a .bin file and kept in internal memory one time. | |
| * Everytime display comes back from low power state this function is called to | |
| * copy the firmware from internal memory to registers. | |
| */ | |
| void intel_csr_load_program(struct drm_device *dev) | |
| { | |
| struct drm_i915_private *dev_priv = dev->dev_private; | |
| u32 *payload = dev_priv->csr.dmc_payload; | |
| uint32_t i, fw_size; | |
| if (!IS_GEN9(dev)) { | |
| DRM_ERROR("No CSR support available for this platform\n"); | |
| return; | |
| } | |
| /* | |
| * FIXME: Firmware gets lost on S3/S4, but not when entering system | |
| * standby or suspend-to-idle (which is just like forced runtime pm). | |
| * Unfortunately the ACPI subsystem doesn't yet give us a way to | |
| * differentiate this, hence figure it out with this hack. | |
| */ | |
| if (I915_READ(CSR_PROGRAM(0))) | |
| return; | |
| mutex_lock(&dev_priv->csr_lock); | |
| fw_size = dev_priv->csr.dmc_fw_size; | |
| for (i = 0; i < fw_size; i++) | |
| I915_WRITE(CSR_PROGRAM(i), payload[i]); | |
| for (i = 0; i < dev_priv->csr.mmio_count; i++) { | |
| I915_WRITE(dev_priv->csr.mmioaddr[i], | |
| dev_priv->csr.mmiodata[i]); | |
| } | |
| dev_priv->csr.state = FW_LOADED; | |
| mutex_unlock(&dev_priv->csr_lock); | |
| } | |
| static void finish_csr_load(const struct firmware *fw, void *context) | |
| { | |
| struct drm_i915_private *dev_priv = context; | |
| struct drm_device *dev = dev_priv->dev; | |
| struct intel_css_header *css_header; | |
| struct intel_package_header *package_header; | |
| struct intel_dmc_header *dmc_header; | |
| struct intel_csr *csr = &dev_priv->csr; | |
| char stepping = intel_get_stepping(dev); | |
| char substepping = intel_get_substepping(dev); | |
| uint32_t dmc_offset = CSR_DEFAULT_FW_OFFSET, readcount = 0, nbytes; | |
| uint32_t i; | |
| uint32_t *dmc_payload; | |
| bool fw_loaded = false; | |
| if (!fw) { | |
| i915_firmware_load_error_print(csr->fw_path, 0); | |
| goto out; | |
| } | |
| if ((stepping == -ENODATA) || (substepping == -ENODATA)) { | |
| DRM_ERROR("Unknown stepping info, firmware loading failed\n"); | |
| goto out; | |
| } | |
| /* Extract CSS Header information*/ | |
| css_header = (struct intel_css_header *)fw->data; | |
| if (sizeof(struct intel_css_header) != | |
| (css_header->header_len * 4)) { | |
| DRM_ERROR("Firmware has wrong CSS header length %u bytes\n", | |
| (css_header->header_len * 4)); | |
| goto out; | |
| } | |
| readcount += sizeof(struct intel_css_header); | |
| /* Extract Package Header information*/ | |
| package_header = (struct intel_package_header *) | |
| &fw->data[readcount]; | |
| if (sizeof(struct intel_package_header) != | |
| (package_header->header_len * 4)) { | |
| DRM_ERROR("Firmware has wrong package header length %u bytes\n", | |
| (package_header->header_len * 4)); | |
| goto out; | |
| } | |
| readcount += sizeof(struct intel_package_header); | |
| /* Search for dmc_offset to find firware binary. */ | |
| for (i = 0; i < package_header->num_entries; i++) { | |
| if (package_header->fw_info[i].substepping == '*' && | |
| stepping == package_header->fw_info[i].stepping) { | |
| dmc_offset = package_header->fw_info[i].offset; | |
| break; | |
| } else if (stepping == package_header->fw_info[i].stepping && | |
| substepping == package_header->fw_info[i].substepping) { | |
| dmc_offset = package_header->fw_info[i].offset; | |
| break; | |
| } else if (package_header->fw_info[i].stepping == '*' && | |
| package_header->fw_info[i].substepping == '*') | |
| dmc_offset = package_header->fw_info[i].offset; | |
| } | |
| if (dmc_offset == CSR_DEFAULT_FW_OFFSET) { | |
| DRM_ERROR("Firmware not supported for %c stepping\n", stepping); | |
| goto out; | |
| } | |
| readcount += dmc_offset; | |
| /* Extract dmc_header information. */ | |
| dmc_header = (struct intel_dmc_header *)&fw->data[readcount]; | |
| if (sizeof(struct intel_dmc_header) != (dmc_header->header_len)) { | |
| DRM_ERROR("Firmware has wrong dmc header length %u bytes\n", | |
| (dmc_header->header_len)); | |
| goto out; | |
| } | |
| readcount += sizeof(struct intel_dmc_header); | |
| /* Cache the dmc header info. */ | |
| if (dmc_header->mmio_count > ARRAY_SIZE(csr->mmioaddr)) { | |
| DRM_ERROR("Firmware has wrong mmio count %u\n", | |
| dmc_header->mmio_count); | |
| goto out; | |
| } | |
| csr->mmio_count = dmc_header->mmio_count; | |
| for (i = 0; i < dmc_header->mmio_count; i++) { | |
| if (dmc_header->mmioaddr[i] < CSR_MMIO_START_RANGE || | |
| dmc_header->mmioaddr[i] > CSR_MMIO_END_RANGE) { | |
| DRM_ERROR(" Firmware has wrong mmio address 0x%x\n", | |
| dmc_header->mmioaddr[i]); | |
| goto out; | |
| } | |
| csr->mmioaddr[i] = dmc_header->mmioaddr[i]; | |
| csr->mmiodata[i] = dmc_header->mmiodata[i]; | |
| } | |
| /* fw_size is in dwords, so multiplied by 4 to convert into bytes. */ | |
| nbytes = dmc_header->fw_size * 4; | |
| if (nbytes > CSR_MAX_FW_SIZE) { | |
| DRM_ERROR("CSR firmware too big (%u) bytes\n", nbytes); | |
| goto out; | |
| } | |
| csr->dmc_fw_size = dmc_header->fw_size; | |
| csr->dmc_payload = kmalloc(nbytes, GFP_KERNEL); | |
| if (!csr->dmc_payload) { | |
| DRM_ERROR("Memory allocation failed for dmc payload\n"); | |
| goto out; | |
| } | |
| dmc_payload = csr->dmc_payload; | |
| memcpy(dmc_payload, &fw->data[readcount], nbytes); | |
| /* load csr program during system boot, as needed for DC states */ | |
| intel_csr_load_program(dev); | |
| fw_loaded = true; | |
| DRM_DEBUG_KMS("Finished loading %s\n", dev_priv->csr.fw_path); | |
| out: | |
| if (fw_loaded) | |
| intel_runtime_pm_put(dev_priv); | |
| else | |
| intel_csr_load_status_set(dev_priv, FW_FAILED); | |
| release_firmware(fw); | |
| } | |
| /** | |
| * intel_csr_ucode_init() - initialize the firmware loading. | |
| * @dev: drm device. | |
| * | |
| * This function is called at the time of loading the display driver to read | |
| * firmware from a .bin file and copied into a internal memory. | |
| */ | |
| void intel_csr_ucode_init(struct drm_device *dev) | |
| { | |
| struct drm_i915_private *dev_priv = dev->dev_private; | |
| struct intel_csr *csr = &dev_priv->csr; | |
| int ret; | |
| if (!HAS_CSR(dev)) | |
| return; | |
| if (IS_SKYLAKE(dev)) | |
| csr->fw_path = I915_CSR_SKL; | |
| else if (IS_BROXTON(dev_priv)) | |
| csr->fw_path = I915_CSR_BXT; | |
| else { | |
| DRM_ERROR("Unexpected: no known CSR firmware for platform\n"); | |
| intel_csr_load_status_set(dev_priv, FW_FAILED); | |
| return; | |
| } | |
| DRM_DEBUG_KMS("Loading %s\n", csr->fw_path); | |
| /* | |
| * Obtain a runtime pm reference, until CSR is loaded, | |
| * to avoid entering runtime-suspend. | |
| */ | |
| intel_runtime_pm_get(dev_priv); | |
| /* CSR supported for platform, load firmware */ | |
| ret = request_firmware_nowait(THIS_MODULE, true, csr->fw_path, | |
| &dev_priv->dev->pdev->dev, | |
| GFP_KERNEL, dev_priv, | |
| finish_csr_load); | |
| if (ret) { | |
| i915_firmware_load_error_print(csr->fw_path, ret); | |
| intel_csr_load_status_set(dev_priv, FW_FAILED); | |
| } | |
| } | |
| /** | |
| * intel_csr_ucode_fini() - unload the CSR firmware. | |
| * @dev: drm device. | |
| * | |
| * Firmmware unloading includes freeing the internal momory and reset the | |
| * firmware loading status. | |
| */ | |
| void intel_csr_ucode_fini(struct drm_device *dev) | |
| { | |
| struct drm_i915_private *dev_priv = dev->dev_private; | |
| if (!HAS_CSR(dev)) | |
| return; | |
| intel_csr_load_status_set(dev_priv, FW_FAILED); | |
| kfree(dev_priv->csr.dmc_payload); | |
| } | |
| void assert_csr_loaded(struct drm_i915_private *dev_priv) | |
| { | |
| WARN_ONCE(intel_csr_load_status_get(dev_priv) != FW_LOADED, | |
| "CSR is not loaded.\n"); | |
| WARN_ONCE(!I915_READ(CSR_PROGRAM(0)), | |
| "CSR program storage start is NULL\n"); | |
| WARN_ONCE(!I915_READ(CSR_SSP_BASE), "CSR SSP Base Not fine\n"); | |
| WARN_ONCE(!I915_READ(CSR_HTP_SKL), "CSR HTP Not fine\n"); | |
| } |